Leon Romanovsky says:
====================
This series fixes various corner cases in the mlx5_ib MR cache
implementation, see specific commit messages for more information.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_mr-cache':
RDMA/mlx5: Allow MRs to be created in the cache synchronously
RDMA/mlx5: Revise how the hysteresis scheme works for cache filling
RDMA/mlx5: Fix locking in MR cache work queue
RDMA/mlx5: Lock access to ent->available_mrs/limit when doing queue_work
RDMA/mlx5: Fix MR cache size and limit debugfs
RDMA/mlx5: Always remove MRs from the cache before destroying them
RDMA/mlx5: Simplify how the MR cache bucket is located
RDMA/mlx5: Rename the tracking variables for the MR cache
RDMA/mlx5: Replace spinlock protected write with atomic var
{IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib
{IB,net}/mlx5: Assign mkey variant in mlx5_ib only
{IB,net}/mlx5: Setup mkey variant before mr create command invocation
As mlx5_ib is the only user of the mlx5_core_create_mkey_cb, move the
logic inside mlx5_ib and cleanup the code in mlx5_core.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
mkey variant is not required for mlx5_core use, move the mkey variant
counter to mlx5_ib.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Until now the flex parser capability was used in ib_query_device() to
indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp.
Newer devices and firmware will have configurations with the flexparser
but without mpls support.
Testing for the flex parser capability was a mistake, the tunnel_stateless
capability was intended for detecting mpls and was introduced at the same
time as the flex parser capability.
Otherwise userspace will be incorrectly informed that a future device
supports MPLS when it does not.
Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.17
Fixes: e818e255a5 ("IB/mlx5: Expose MPLS related tunneling offloads")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas Says:
====================
Expose raw packet pacing APIs to be used by DEVX based applications. The
existing code was refactored to have a single flow with the new raw APIs.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_packet_pacing':
IB/mlx5: Introduce UAPIs to manage packet pacing
net/mlx5: Expose raw packet pacing APIs
Pull driver core and debugfs fixes from Greg KH:
"Here are four small driver core / debugfs patches for 5.6-rc3:
- debugfs api cleanup now that all debugfs_create_regset32() callers
have been fixed up. This was waiting until after the -rc1 merge as
these fixes came in through different trees
- driver core sync state fixes based on reports of minor issues found
in the feature
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Skip unnecessary work when device doesn't have sync_state()
driver core: Add dev_has_sync_state()
driver core: Call sync_state() even if supplier has no consumers
debugfs: remove return value of debugfs_create_regset32()
Expose port rate as part of the port speed register fields.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Expose the TLS encryption key general object type enum correctly,
and add the IPSec encryption key general object type enum.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add HCA_CAP.egress_acl_forward_to_vport field to check whether HW
supports e-switch vport's egress acl to forward packets to other
e-switch vport or not.
By default E-Switch egress ACL forwards eswitch vports egress packets
to their corresponding NIC/VF vports.
With this cap enabled, the driver is allowed to alter this behavior
and forward packets to arbitrary NIC/VF vports with the following
limitations:
a. Multiple processing paths are supported if all of the following
conditions are met:
- HCA_CAP.egress_acl_forward_to_vport is set ==1.
- A destination of type Flow Table only appears once, as the
last destination in the list.
- Vport destination is supported if
HCA_CAP.egress_acl_forward_to_vport==1. Vport must not be
the Uplink.
b. Flow_tag not supported.
c. This table is only applicable after an FDB table is created.
d. Push VLAN action is not supported.
e. Pop VLAN action cannot be added concurrently to this table and
FDB table.
This feature will be used during port failover in bonding scenario
where two VFs representors are bonded to handle failover egress traffic
(VM's ingress/receive traffic).
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pull block fixes from Jens Axboe:
"Here are a few fixes that should go into this release. This contains:
- Revert of a bad bcache patch from this merge window
- Removed unused function (Daniel)
- Fixup for the blktrace fix from Jan from this release (Cengiz)
- Fix of deeper level bfqq overwrite in BFQ (Carlo)"
* tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
blktrace: fix dereference after null check
Revert "bcache: ignore pending signals when creating gc and allocator thread"
block: Remove used kblockd_schedule_work_on()
Pull spi fixes from Mark Brown:
"A selection of small fixes, mostly for drivers, that have arrived
since the merge window. None of them are earth shattering in
themselves but all useful for affected systems"
* tag 'spi-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi_register_controller(): free bus id on error paths
spi: bcm63xx-hsspi: Really keep pll clk enabled
spi: atmel-quadspi: fix possible MMIO window size overrun
spi/zynqmp: remove entry that causes a cs glitch
spi: pxa2xx: Add CS control clock quirk
spi: spidev: Fix CS polarity if GPIO descriptors are used
spi: qup: call spi_qup_pm_resume_runtime before suspending
spi: spi-omap2-mcspi: Support probe deferral for DMA channels
spi: spi-omap2-mcspi: Handle DMA size restriction on AM65x
Commit cd02cf1ace ("mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC")
fixed memory hotplug with debug_pagealloc enabled, where onlining a page
goes through page freeing, which removes the direct mapping. Some arches
don't like when the page is not mapped in the first place, so
generic_online_page() maps it first. This is somewhat wasteful, but
better than special casing page freeing fast paths.
The commit however missed that DEBUG_PAGEALLOC configured doesn't mean
it's actually enabled. One has to test debug_pagealloc_enabled() since
031bc5743f ("mm/debug-pagealloc: make debug-pagealloc boottime
configurable"), or alternatively debug_pagealloc_enabled_static() since
8e57f8acbb ("mm, debug_pagealloc: don't rely on static keys too early"),
but this is not done.
As a result, a s390 kernel with DEBUG_PAGEALLOC configured but not enabled
will crash:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
Fault in home space mode while using kernel ASCE.
AS:0000001ece13400b R2:000003fff7fd000b R3:000003fff7fcc007 S:000003fff7fd7000 P:000000000000013d
Oops: 0004 ilc:2 [#1] SMP
CPU: 1 PID: 26015 Comm: chmem Kdump: loaded Tainted: GX 5.3.18-5-default #1 SLE15-SP2 (unreleased)
Krnl PSW : 0704e00180000000 0000001ecd281b9e (__kernel_map_pages+0x166/0x188)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000000 0000000000000800 0000400b00000000 0000000000000100
0000000000000001 0000000000000000 0000000000000002 0000000000000100
0000001ece139230 0000001ecdd98d40 0000400b00000100 0000000000000000
000003ffa17e4000 001fffe0114f7d08 0000001ecd4d93ea 001fffe0114f7b20
Krnl Code: 0000001ecd281b8e: ec17ffff00d8 ahik %r1,%r7,-1
0000001ecd281b94: ec111dbc0355 risbg %r1,%r1,29,188,3
>0000001ecd281b9e: 94fb5006 ni 6(%r5),251
0000001ecd281ba2: 41505008 la %r5,8(%r5)
0000001ecd281ba6: ec51fffc6064 cgrj %r5,%r1,6,1ecd281b9e
0000001ecd281bac: 1a07 ar %r0,%r7
0000001ecd281bae: ec03ff584076 crj %r0,%r3,4,1ecd281a5e
Call Trace:
[<0000001ecd281b9e>] __kernel_map_pages+0x166/0x188
[<0000001ecd4d9516>] online_pages_range+0xf6/0x128
[<0000001ecd2a8186>] walk_system_ram_range+0x7e/0xd8
[<0000001ecda28aae>] online_pages+0x2fe/0x3f0
[<0000001ecd7d02a6>] memory_subsys_online+0x8e/0xc0
[<0000001ecd7add42>] device_online+0x5a/0xc8
[<0000001ecd7d0430>] state_store+0x88/0x118
[<0000001ecd5b9f62>] kernfs_fop_write+0xc2/0x200
[<0000001ecd5064b6>] vfs_write+0x176/0x1e0
[<0000001ecd50676a>] ksys_write+0xa2/0x100
[<0000001ecda315d4>] system_call+0xd8/0x2c8
Fix this by checking debug_pagealloc_enabled_static() before calling
kernel_map_pages(). Backports for kernel before 5.5 should use
debug_pagealloc_enabled() instead. Also add comments.
Fixes: cd02cf1ace ("mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC")
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200224094651.18257-1-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Expose raw packet pacing APIs to be used by DEVX based applications.
The existing code was refactored to have a single flow with the new raw
APIs.
The new raw APIs considered the input of 'pp_rate_limit_context', uid,
'dedicated', upon looking for an existing entry.
This raw mode enables future device specification data in the raw
context without changing the existing logic and code.
The ability to ask for a dedicated entry gives control for application
to allocate entries according to its needs.
A dedicated entry may not be used by some other process and it also
enables the process spreading its resources to some different entries
for use different hardware resources as part of enforcing the rate.
The counter per entry was changed to be u64 to prevent any option to
overflow.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Commit ee63cfa7fc ("block: add kblockd_schedule_work_on()")
introduced the helper in 2016. Remove it because since then no caller
was added.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull KVM fixes from Paolo Bonzini:
"More bugfixes, including a few remaining "make W=1" issues such as too
large frame sizes on some configurations.
On the ARM side, the compiler was messing up shadow stacks between EL1
and EL2 code, which is easily fixed with __always_inline"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: check descriptor table exits on instruction emulation
kvm: x86: Limit the number of "kvm: disabled by bios" messages
KVM: x86: avoid useless copy of cpufreq policy
KVM: allow disabling -Werror
KVM: x86: allow compiling as non-module with W=1
KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
KVM: Introduce pv check helpers
KVM: let declaration of kvm_get_running_vcpus match implementation
KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
arm64: Ask the compiler to __always_inline functions used by KVM at HYP
KVM: arm64: Define our own swab32() to avoid a uapi static inline
KVM: arm64: Ask the compiler to __always_inline functions used at HYP
kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
KVM: arm/arm64: Fix up includes for trace.h
Pull networking fixes from David Miller:
1) Fix leak in nl80211 AP start where we leak the ACL memory, from
Johannes Berg.
2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski.
3) Fix RCU stall in ipset, from Jozsef Kadlecsik.
4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna
Bhowmik.
5) Fix race causing TX hang in ll_temac, from Esben Haabendal.
6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov.
7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha
Nambiar.
8) Size netlink responses properly in schedule action code to take into
consideration TCA_ACT_FLAGS. From Jiri Pirko.
9) Fix firmware paths for mscc PHY driver, from Antoine Tenart.
10) Don't register stmmac notifier multiple times, from Aaro Koskinen.
11) Various rmnet bug fixes, from Taehee Yoo.
12) Fix vsock deadlock in vsock transport release, from Stefano
Garzarella.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: dsa: mv88e6xxx: Fix masking of egress port
mlxsw: pci: Wait longer before accessing the device after reset
sfc: fix timestamp reconstruction at 16-bit rollover points
vsock: fix potential deadlock in transport->release()
unix: It's CONFIG_PROC_FS not CONFIG_PROCFS
net: rmnet: fix packet forwarding in rmnet bridge mode
net: rmnet: fix bridge mode bugs
net: rmnet: use upper/lower device infrastructure
net: rmnet: do not allow to change mux id if mux id is duplicated
net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()
net: rmnet: fix suspicious RCU usage
net: rmnet: fix NULL pointer dereference in rmnet_changelink()
net: rmnet: fix NULL pointer dereference in rmnet_newlink()
net: phy: marvell: don't interpret PHY status unless resolved
mlx5: register lag notifier for init network namespace only
unix: define and set show_fdinfo only if procfs is enabled
hinic: fix a bug of rss configuration
hinic: fix a bug of setting hw_ioctxt
hinic: fix a irq affinity bug
net/smc: check for valid ib_client_data
...
Pull HID subsystem fixes from Jiri Kosina:
- syzkaller-reported error handling fixes in various drivers, from
various people
- increase of HID report buffer size to 8K, which is apparently needed
by certain modern devices
- a few new device-ID-specific fixes / quirks
- battery charging status reporting fix in logitech-hidpp, from Filipe
Laíns
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hid-bigbenff: fix race condition for scheduled work during removal
HID: hid-bigbenff: call hid_hw_stop() in case of error
HID: hid-bigbenff: fix general protection fault caused by double kfree
HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override
HID: alps: Fix an error handling path in 'alps_input_configured()'
HID: hiddev: Fix race in in hiddev_disconnect()
HID: core: increase HID report buffer size to 8KiB
HID: core: fix off-by-one memset in hid_report_raw_event()
HID: apple: Add support for recent firmware on Magic Keyboards
HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes:
1) Perform garbage collection from workqueue to fix rcu detected
stall in ipset hash set types, from Jozsef Kadlecsik.
2) Fix the forceadd evaluation path, also from Jozsef.
3) Fix nft_set_pipapo selftest, from Stefano Brivio.
4) Crash when add-flush-add element in pipapo set, also from Stefano.
Add test to cover this crash.
5) Remove sysctl entry under mutex in hashlimit, from Cong Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull tracing and bootconfig updates:
"Fixes and changes to bootconfig before it goes live in a release.
Change in API of bootconfig (before it comes live in a release):
- Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
exists
- Set CONFIG_BOOT_CONFIG to 'n' by default
- Show error if "bootconfig" on cmdline but not compiled in
- Prevent redefining the same value
- Have a way to append values
- Added a SELECT BLK_DEV_INITRD to fix a build failure
Synthetic event fixes:
- Switch to raw_smp_processor_id() for recording CPU value in preempt
section. (No care for what the value actually is)
- Fix samples always recording u64 values
- Fix endianess
- Check number of values matches number of fields
- Fix a printing bug
Fix of trace_printk() breaking postponed start up tests
Make a function static that is only used in a single file"
* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
bootconfig: Add append value operator support
bootconfig: Prohibit re-defining value on same key
bootconfig: Print array as multiple commands for legacy command line
bootconfig: Reject subkey and value on same parent key
tools/bootconfig: Remove unneeded error message silencer
bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
bootconfig: Set CONFIG_BOOT_CONFIG=n by default
tracing: Clear trace_state when starting trace
bootconfig: Mark boot_config_checksum() static
tracing: Disable trace_printk() on post poned tests
tracing: Have synthetic event test use raw_smp_processor_id()
tracing: Fix number printing bug in print_synth_event()
tracing: Check that number of vals matches number of synth event fields
tracing: Make synth_event trace functions endian-correct
tracing: Make sure synth_event_trace() example always uses u64
Jozsef Kadlecsik says:
====================
ipset patches for nf
The first one is larger than usual, but the issue could not be solved simpler.
Also, it's a resend of the patch I submitted a few days ago, with a one line
fix on top of that: the size of the comment extensions was not taken into
account at reporting the full size of the set.
- Fix "INFO: rcu detected stall in hash_xxx" reports of syzbot
by introducing region locking and using workqueue instead of timer based
gc of timed out entries in hash types of sets in ipset.
- Fix the forceadd evaluation path - the bug was also uncovered by the syzbot.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The icmpv6_send function has long had a static inline implementation
with an empty body for CONFIG_IPV6=n, so that code calling it doesn't
need to be ifdef'd. The new icmpv6_ndo_send function, which is intended
for drivers as a drop-in replacement with an identical function
signature, should follow the same pattern. Without this patch, drivers
that used to work with CONFIG_IPV6=n now result in a linker error.
Cc: Chen Zhou <chenzhou10@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0b41713b60 ("icmp: introduce helper for nat'd source address in network device context")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
CC: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Tristan Madani <tristmd@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, including the fix for CVE-2020-2732 and a few issues found
by 'make W=1'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: rstify new ioctls in api.rst
KVM: nVMX: Check IO instruction VM-exit conditions
KVM: nVMX: Refactor IO bitmap checks into helper function
KVM: nVMX: Don't emulate instructions in guest mode
KVM: nVMX: Emulate MTF when performing instruction emulation
KVM: fix error handling in svm_hardware_setup
KVM: SVM: Fix potential memory leak in svm_cpu_init()
KVM: apic: avoid calculating pending eoi from an uninitialized val
KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled
KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1
kvm: x86: svm: Fix NULL pointer dereference when AVIC not enabled
KVM: VMX: Add VMX_FEATURE_USR_WAIT_PAUSE
KVM: nVMX: Hold KVM's srcu lock when syncing vmcs12->shadow
KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI
kvm/emulate: fix a -Werror=cast-function-type
KVM: x86: fix incorrect comparison in trace event
KVM: nVMX: Fix some obsolete comments and grammar error
KVM: x86: fix missing prototypes
KVM: x86: enable -Werror
Pull irq fixes from Thomas Gleixner:
"Two fixes for the irq core code which are follow ups to the recent MSI
fixes:
- The WARN_ON which was put into the MSI setaffinity callback for
paranoia reasons actually triggered via a callchain which escaped
when all the possible ways to reach that code were analyzed.
The proc/irq/$N/*affinity interfaces have a quirk which came in
when ALPHA moved to the generic interface: In case that the written
affinity mask does not contain any online CPU it calls into ALPHAs
magic auto affinity setting code.
A few years later this mechanism was also made available to x86 for
no good reasons and in a way which circumvents all sanity checks
for interrupts which cannot have their affinity set from process
context on X86 due to the way the X86 interrupt delivery works.
It would be possible to make this work properly, but there is no
point in doing so. If the interrupt is not yet started then the
affinity setting has no effect and if it is started already then it
is already assigned to an online CPU so there is no point to
randomly move it to some other CPU. Just return EINVAL as the code
has done before that change forever.
- The new MSI quirk bit in the irq domain flags turned out to be
already occupied, which escaped the author and the reviewers
because the already in use bits were 0,6,2,3,4,5 listed in that
order.
That bit 6 was simply overlooked because the ordering was straight
forward linear otherwise. So the new bit ended up being a
duplicate.
Fix it up by switching the oddball 6 to the obvious 1"
* tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdomain: Make sure all irq domain flags are distinct
genirq/proc: Reject invalid affinity masks (again)
In the case of huge hash:* types of sets, due to the single spinlock of
a set the processing of the whole set under spinlock protection could take
too long.
There were four places where the whole hash table of the set was processed
from bucket to bucket under holding the spinlock:
- During resizing a set, the original set was locked to exclude kernel side
add/del element operations (userspace add/del is excluded by the
nfnetlink mutex). The original set is actually just read during the
resize, so the spinlocking is replaced with rcu locking of regions.
However, thus there can be parallel kernel side add/del of entries.
In order not to loose those operations a backlog is added and replayed
after the successful resize.
- Garbage collection of timed out entries was also protected by the spinlock.
In order not to lock too long, region locking is introduced and a single
region is processed in one gc go. Also, the simple timer based gc running
is replaced with a workqueue based solution. The internal book-keeping
(number of elements, size of extensions) is moved to region level due to
the region locking.
- Adding elements: when the max number of the elements is reached, the gc
was called to evict the timed out entries. The new approach is that the gc
is called just for the matching region, assuming that if the region
(proportionally) seems to be full, then the whole set does. We could scan
the other regions to check every entry under rcu locking, but for huge
sets it'd mean a slowdown at adding elements.
- Listing the set header data: when the set was defined with timeout
support, the garbage collector was called to clean up timed out entries
to get the correct element numbers and set size values. Now the set is
scanned to check non-timed out entries, without actually calling the gc
for the whole set.
Thanks to Florian Westphal for helping me to solve the SOFTIRQ-safe ->
SOFTIRQ-unsafe lock order issues during working on the patch.
Reported-by: syzbot+4b0e9d4ff3cf117837e5@syzkaller.appspotmail.com
Reported-by: syzbot+c27b8d5010f45c666ed1@syzkaller.appspotmail.com
Reported-by: syzbot+68a806795ac89df3aa1c@syzkaller.appspotmail.com
Fixes: 23c42a403a ("netfilter: ipset: Introduction of new commands and protocol version 7")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 5.6-rc3
that resolve a bunch of reported issues.
They are:
- vt selection and ioctl fixes
- serdev bugfix
- atmel serial driver fixes
- qcom serial driver fixes
- other minor serial driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: selection, close sel_buffer race
vt: selection, handle pending signals in paste_selection
serial: cpm_uart: call cpm_muram_init before registering console
tty: serial: qcom_geni_serial: Fix RX cancel command failure
serial: 8250: Check UPF_IRQ_SHARED in advance
tty: serial: imx: setup the correct sg entry for tx dma
vt: vt_ioctl: fix race in VT_RESIZEX
vt: fix scrollback flushing on background consoles
tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
serdev: ttyport: restore client ops on deregistration
serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.6-rc3.
Included in here are:
- MAINTAINER file updates
- USB gadget driver fixes
- usb core quirk additions and fixes for regressions
- xhci driver fixes
- usb serial driver id additions and fixes
- thunderbolt bugfix
Thunderbolt patches come in through here now that USB4 is really
thunderbolt.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits)
USB: misc: iowarrior: add support for the 100 device
thunderbolt: Prevent crash if non-active NVMem file is read
usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc format
USB: misc: iowarrior: add support for the 28 and 28L devices
USB: misc: iowarrior: add support for 2 OEMed devices
USB: Fix novation SourceControl XL after suspend
xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2
Revert "xhci: Fix memory leak when caching protocol extended capability PSI tables"
MAINTAINERS: Sort entries in database for THUNDERBOLT
usb: dwc3: debug: fix string position formatting mixup with ret and len
usb: gadget: serial: fix Tx stall after buffer overflow
usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows
usb: dwc2: Fix in ISOC request length checking
usb: gadget: composite: Support more than 500mA MaxPower
usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus
usb: gadget: u_audio: Fix high-speed max packet size
usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
USB: core: clean up endpoint-descriptor parsing
USB: quirks: blacklist duplicate ep on Sound Devices USBPre2
...
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
This was noticed when printing debugfs for MSIs on my ARM64 server. The
new dstate IRQD_MSI_NOMASK_QUIRK came out surprisingly while it should only
be the x86 stuff for the time being...
The new MSI quirk flag uses the same bit as IRQ_DOMAIN_NAME_ALLOCATED which
is oddly defined as bit 6 for no good reason.
Switch it to the non used bit 1.
Fixes: 6f1a4891a5 ("x86/apic/msi: Plug non-maskable MSI affinity race")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200221020725.2038-1-yuzenghui@huawei.com
Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.
The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.
[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]
Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-02-18
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v5.3
('net/mlx5: Fix sleep while atomic in mlx5_eswitch_get_vepa')
For -stable v5.4
('net/mlx5: DR, Fix matching on vport gvmi')
('net/mlx5e: Fix crash in recovery flow without devlink reporter')
For -stable v5.5
('net/mlx5e: Reset RQ doorbell counter before moving RQ state from RST to RDY')
('net/mlx5e: Don't clear the whole vf config when switching modes')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull iommu fixes from Joerg Roedel:
- Compile warning fix for the Intel IOMMU driver
- Fix kdump boot with Intel IOMMU enabled and in passthrough mode
- Disable AMD IOMMU on a Laptop/Embedded platform because the delay it
introduces in DMA transactions causes screen flickering there with 4k
monitors
- Make domain_free function in QCOM IOMMU driver robust and not leak
memory/dereference NULL pointers
- Fix ARM-SMMU module parameter prefix names
* tag 'iommu-fixes-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Restore naming of driver parameter prefix
iommu/qcom: Fix bogus detach logic
iommu/amd: Disable IOMMU on Stoney Ridge systems
iommu/vt-d: Simplify check in identity_mapping()
iommu/vt-d: Remove deferred_attach_domain()
iommu/vt-d: Do deferred attachment in iommu_need_mapping()
iommu/vt-d: Move deferred device attachment into helper function
iommu/vt-d: Add attach_deferred() helper
iommu/vt-d: Fix compile warning from intel-svm.h
On flow table creation, send the relevant flags according to what the FW
currently supports.
When FW doesn't support reformat option over SW-steering managed table,
the driver shouldn't pass this.
Fixes: 988fd6b32d ("net/mlx5: DR, Pass table flags at creation to lower layer")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This batch contains Netfilter fixes for net:
1) Restrict hashlimit size to 1048576, from Cong Wang.
2) Check for offload flags from nf_flow_table_offload_setup(),
this fixes a crash in case the hardware offload is disabled.
From Florian Westphal.
3) Three preparation patches to extend the conntrack clash resolution,
from Florian.
4) Extend clash resolution to deal with DNS packets from the same flow
racing to set up the NAT configuration.
5) Small documentation fix in pipapo, from Stefano Brivio.
6) Remove misleading unlikely() from pipapo_refill(), also from Stefano.
7) Reduce hashlimit mutex scope, from Cong Wang. This patch is actually
triggering another problem, still under discussion, another patch to
fix this will follow up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull dma-mapping fixes from Christoph Hellwig:
- give command line cma= precedence over the CONFIG_ option (Nicolas
Saenz Julienne)
- always allow 32-bit DMA, even for weirdly placed ZONE_DMA
- improve the debug printks when memory is not addressable, to help
find problems with swiotlb initialization
* tag 'dma-mapping-5.6' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: improve DMA mask overflow reporting
dma-direct: improve swiotlb error reporting
dma-direct: relax addressability checks in dma_direct_supported
dma-contiguous: CMA: give precedence to cmdline
This patch further relaxes the need to drop an skb due to a clash with
an existing conntrack entry.
Current clash resolution handles the case where the clash occurs between
two identical entries (distinct nf_conn objects with same tuples), i.e.:
Original Reply
existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
... existing handling will discard the unconfirmed clashing entry and
makes skb->_nfct point to the existing one. The skb can then be
processed normally just as if the clash would not have existed in the
first place.
For other clashes, the skb needs to be dropped.
This frequently happens with DNS resolvers that send A and AAAA queries
back-to-back when NAT rules are present that cause packets to get
different DNAT transformations applied, for example:
-m statistics --mode random ... -j DNAT --dnat-to 10.0.0.6:5353
-m statistics --mode random ... -j DNAT --dnat-to 10.0.0.7:5353
In this case the A or AAAA query is dropped which incurs a costly
delay during name resolution.
This patch also allows this collision type:
Original Reply
existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.7:5353
In this case, clash is in original direction -- the reply direction
is still unique.
The change makes it so that when the 2nd colliding packet is received,
the clashing conntrack is tagged with new IPS_NAT_CLASH_BIT, gets a fixed
1 second timeout and is inserted in the reply direction only.
The entry is hidden from 'conntrack -L', it will time out quickly
and it can be early dropped because it will never progress to the
ASSURED state.
To avoid special-casing the delete code path to special case
the ORIGINAL hlist_nulls node, a new helper, "hlist_nulls_add_fake", is
added so hlist_nulls_del() will work.
Example:
CPU A: CPU B:
1. 10.2.3.4:42 -> 10.8.8.8:53 (A)
2. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA)
3. Apply DNAT, reply changed to 10.0.0.6
4. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA)
5. Apply DNAT, reply changed to 10.0.0.7
6. confirm/commit to conntrack table, no collisions
7. commit clashing entry
Reply comes in:
10.2.3.4:42 <- 10.0.0.6:5353 (A)
-> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42
10.2.3.4:42 <- 10.0.0.7:5353 (AAAA)
-> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42
The conntrack entry is deleted from table, as it has the NAT_CLASH
bit set.
In case of a retransmit from ORIGINAL dir, all further packets will get
the DNAT transformation to 10.0.0.6.
I tried to come up with other solutions but they all have worse
problems.
Alternatives considered were:
1. Confirm ct entries at allocation time, not in postrouting.
a. will cause uneccesarry work when the skb that creates the
conntrack is dropped by ruleset.
b. in case nat is applied, ct entry would need to be moved in
the table, which requires another spinlock pair to be taken.
c. breaks the 'unconfirmed entry is private to cpu' assumption:
we would need to guard all nfct->ext allocation requests with
ct->lock spinlock.
2. Make the unconfirmed list a hash table instead of a pcpu list.
Shares drawback c) of the first alternative.
3. Document this is expected and force users to rearrange their
ruleset (e.g. by using "-m cluster" instead of "-m statistics").
nft has the 'jhash' expression which can be used instead of 'numgen'.
Major drawback: doesn't fix what I consider a bug, not very realistic
and I believe its reasonable to have the existing rulesets to 'just
work'.
4. Document this is expected and force users to steer problematic
packets to the same CPU -- this would serialize the "allocate new
conntrack entry/nat table evaluation/perform nat/confirm entry", so
no race can occur. Similar drawback to 3.
Another advantage of this patch compared to 1) and 2) is that there are
no changes to the hot path; things are handled in the udp tracker and
the clash resolution path.
Cc: rcu@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix all kernel-doc warnings in <linux/skbuff.h>.
Fixes these warnings:
../include/linux/skbuff.h:890: warning: Function parameter or member 'list' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev_next_lower_dev_rcu() will be used to implement a function,
which is to walk all lower interfaces.
There are already functions that they walk their lower interface.
(netdev_walk_all_lower_dev_rcu, netdev_walk_all_lower_dev()).
But, there would be cases that couldn't be covered by given
netdev_walk_all_lower_dev_{rcu}() function.
So, some modules would want to implement own function,
which is to walk all lower interfaces.
In the next patch, netdev_next_lower_dev_rcu() will be used.
In addition, this patch removes two unused prototypes in netdevice.h.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull scheduler fixes from Ingo Molnar:
"Misc fixes all over the place:
- Fix NUMA over-balancing between lightly loaded nodes. This is
fallout of the big load-balancer rewrite.
- Fix the NOHZ remote loadavg update logic, which fixes anomalies
like reported 150 loadavg on mostly idle CPUs.
- Fix XFS performance/scalability
- Fix throttled groups unbound task-execution bug
- Fix PSI procfs boundary condition
- Fix the cpu.uclamp.{min,max} cgroup configuration write checks
- Fix DocBook annotations
- Fix RCU annotations
- Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
counts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
sched/core: Annotate curr pointer in rq with __rcu
sched/psi: Fix OOB write when writing 0 bytes to PSI files
sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
sched/fair: Prevent unlimited runtime on throttled group
sched/nohz: Optimize get_nohz_timer_target()
sched/uclamp: Reject negative values in cpu_uclamp_write()
sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
timers/nohz: Update NOHZ load in remote tick
sched/core: Don't skip remote tick for idle CPUs
Pull NFS client bugfixes from Anna Schumaker:
"The only stable fix this time is the DMA scatter-gather list bug fixed
by Chuck.
The rest fix up races and refcounting issues that have been found
during testing.
Stable fix:
- fix DMA scatter-gather list mapping imbalance
The rest:
- fix directory verifier races
- fix races between open and dentry revalidation
- fix revalidation of dentries with delegations
- fix "cachethis" setting for writes
- fix delegation and delegation cred pinning"
* tag 'nfs-for-5.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4: Ensure the delegation cred is pinned when we call delegreturn
NFSv4: Ensure the delegation is pinned in nfs_do_return_delegation()
NFSv4.1 make cachethis=no for writes
xprtrdma: Fix DMA scatter-gather list mapping imbalance
NFSv4: Fix revalidation of dentries with delegations
NFSv4: Fix races between open and dentry revalidation
NFS: Fix up directory verifier races
