Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
Merge the new SoC support from Tomer Maimon:
"This patchset adds initial support for the Nuvoton
Arbel NPCM8XX Board Management controller (BMC) SoC family.
The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
The NPCM8XX computing subsystem comprises a quadcore ARM
Cortex A35 ARM-V8 architecture.
This patchset adds minimal architecture and drivers such as:
Clocksource, Clock, Reset, and WD.
Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
This patchset was tested on the Arbel NPCM8XX evaluation board."
I'm leaving out the clk controller driver, which is still under
review.
* nuvoton/newsoc:
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
Qualcomm ARM64 DTS updates for v5.20
This introduces initial support for Lenovo ThinkPad X13s, Qualcomm 8cx
Gen 3 Compute Reference Device, SA8295P Automotive Development Platform,
Xiaomi Mi 5s Plus, five new SC7180 Chrome OS boards, Inforce IFC6560, LG
G7 ThinQ and LG V35 ThinQ.
With IPQ8074 gaining GDSC support, this was expressed in the gcc node
and defined for the USB nodes. The SDHCI reset line was defined to get
the storage devices into a known state.
For MSM8996 interconnect providers, the second DSI interface, resets for
SDHCI are introduced. Support for the Xiaomi Mi 5s Plus is introduced
and the Dragonboard 820c gains definitions for its LEDs.
The MSM8998 platform changes consists of a various cleanup patches, the
FxTec Pro1 is split out from using the MTP dts and Sony Xperia devices
on the "Yoshino" platform gains ToF sensor.
On SC7180 five new Trogdor based boards are added and the description of
keyboard and detachables is improved.
On the SC7280-based Herobrine board DisplayPort is enabled, SPI flash
clock rate is changed, WiFi is enabled and the modem firmware path is
updated. The Villager boards gains touchscreen, and keyboard backlight.
This introduces initial support for the SC8280XP (aka 8cx Gen 3) and
related automotive platforms are introduced, with support for the
Qualcomm reference board, the Lenovo Thinkpad X13s and the SA8295P
Automotive Development Platform.
In addition to a wide range of smaller fixes on the SDM630 and SDM660
platforms, support for the secondary high speed USB controller is
introduced and the Sony Xperia "Nile" platform gains support for the RGB
status LED. Support for the Inforce IFC6560 board is introduced.
On SDM845 the bandwidth monitor for the CPU subsystem is introduced, to
scale LLCC clock rate based on profiling. CPU and cluster idle states
are switched to OSI hierarchical states. DB845c and SHIFT 6mq gains LED
support and new support for the LG G7 ThinQ and LG V35 ThinQ boards are
added.
DLL/DDR configuration for SDHCI nodes are defined for SM6125.
On SM8250 the GPU per-process page tables is enabled and for RB5 the
Light Pulse Generator-based LEDs are added.
The display clock controller is introduced for SM8350.
On SM8450 this introduces the camera clock controller and the UART
typically used for Bluetooth. The interconnect path for the crypto
engine is added to the SCM node, to ensure this is adequately clocked.
The assigned-clock-rate for the display processor is dropped from
several platforms, now that the driver derrives the min and max from the
clock.
In addition to this a wide range of fixes for stylistic issues and
issues discovered through Devicetree binding validation across many
platforms and boards are introduced.
* tag 'qcom-arm64-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (193 commits)
arm64: dts: qcom: sc8280xp: fix DP PHY node unit addresses
arm64: dts: qcom: sc8280xp: fix usb_0 HS PHY ref clock
arm64: dts: qcom: sc7280: fix PCIe clock reference
docs: arm: index.rst: add google/chromebook-boot-flow
arm64: dts: qcom: msm8996: clean up PCIe PHY node
arm64: dts: qcom: msm8996: use non-empty ranges for PCIe PHYs
arm64: dts: qcom: sm8450: drop UFS PHY clock-cells
arm64: dts: qcom: sm8250: drop UFS PHY clock-cells
arm64: dts: qcom: sc8280xp: drop UFS PHY clock-cells
arm64: dts: qcom: sm8450: drop USB PHY clock index
arm64: dts: qcom: sm8350: drop USB PHY clock index
arm64: dts: qcom: msm8998: drop USB PHY clock index
arm64: dts: qcom: ipq8074: drop USB PHY clock index
arm64: dts: qcom: ipq6018: drop USB PHY clock index
arm64: dts: qcom: sm8250: add missing PCIe PHY clock-cells
arm64: dts: qcom: sc7280: drop PCIe PHY clock index
Revert "arm64: dts: qcom: Fix 'reg-names' for sdhci nodes"
arm64: dts: qcom: sc7180-idp: add vdds supply to the DSI PHY
arm64: dts: qcom: sc7280: use constants for gpucc clocks and power-domains
arm64: dts: qcom: msm8996: add missing DSI clock assignments
...
Link: https://lore.kernel.org/r/20220713203939.1431054-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to replace the fsl,scu txt file from bindings/arm/freescale,
we need to split it between the right subsystems. This patch documents
separately the 'clock' child node of the SCU main node.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Like for stm32mp15, when stm32 RCC node is used to interact with a secure
context (using clock SCMI protocol), a different path has to be used for
yaml verification.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Samsung DTS ARM64 changes for v5.20
1. Add CPU cache, UFS to Tesla FSD.
2. Add reboot-mode (boot into specific bootloader mode) to ExynosAutov9.
3. Add watchdogs to ExynosAutov9.
4. Add eMMC to Exynos7885 JackpotLTE (Samsung Galaxy A8).
5. DTS cleanup: white-spaces, node names, LED color/function.
6. Switch to DTS-local header for pinctrl register values instead of
bindings header. The bindings header is being deprecated because it
does not reflect the purpose of bindings.
* tag 'samsung-dt64-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add internal eMMC support to jackpotlte
dt-bindings: clock: Add indices for Exynos7885 TREX clocks
dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS
arm64: dts: exynos: enable secondary ufs devices ExynosAutov9 SADK
arm64: dts: exynos: add secondary ufs devices in ExynosAutov9
arm64: dts: fsd: use local header for pinctrl register values
arm64: dts: exynos: use local header for pinctrl register values
arm64: dts: exynos: align MMC node name with dtschema
arm64: dts: exynos: adjust DT style of ufs nodes in ExynosAutov9
arm64: dts: exynos: adjust whitespace around '='
arm64: dts: fsd: add ufs device node
arm64: dts: exynos: add watchdog in ExynosAutov9
arm64: dts: exynos: add syscon reboot/reboot_mode support in ExynosAutov9
dt-bindings: soc: add samsung,boot-mode definitions
arm64: dts: fsd: Add cpu cache information
Link: https://lore.kernel.org/r/20220624080746.31947-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull dmaengine updates from Vinod Koul:
"Nothing special, this includes a couple of new device support and new
driver support and bunch of driver updates.
New support:
- Tegra gpcdma driver support
- Qualcomm SM8350, Sm8450 and SC7280 device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
- deprecate '#dma-channels' & '#dma-requests' bindings
- driver updates for stm32, ptdma idsx etc"
* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
dmaengine: sun6i: Add support for the D1 variant
dmaengine: sun6i: Add support for 34-bit physical addresses
dmaengine: sun6i: Do not use virt_to_phys
dt-bindings: dma: sun50i-a64: Add compatible for D1
dmaengine: tegra: Remove unused switch case
dmaengine: tegra: Fix uninitialized variable usage
dmaengine: stm32-dma: add device_pause/device_resume support
dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
dmaengine: qcom: gpi: Add support for sc7280
dt-bindings: dma: pl330: Add power-domains
dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
dmaengine: stm32-mdma: remove GISR1 register
dmaengine: ti: deprecate '#dma-channels'
dmaengine: mmp: deprecate '#dma-channels'
dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
...
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
Pull devicetree updates from Rob Herring:
"Bindings:
- Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm,
qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new
props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen,
Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq,
fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx
zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers
- Convert various Arm Ltd peripheral IP bindings to schemas
- New bindings for Menlo board CPLD, DH electronics board CPLD,
Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and
Microchip/SMSC LAN95xx USB Ethernet controllers
- Add vendor prefix for Enclustra
- Add various compatible string additions
- Various example fixes and cleanups
- Remove unused hisilicon,hi6220-reset binding
- Treewide fix properties missing type definition
- Drop some empty and unreferenced .txt bindings
- Documentation improvements for writing schemas
DT driver core:
- Drop static IRQ resources for DT platform devices as IRQ setup is
dynamic and drivers have all been converted to use
platform_get_irq() and friends
- Rework memory allocations and frees for overlays
- Continue overlay notifier callbacks on successful calls and add
unittests
- Handle 'interrupts-extended' in early DT IRQ setup
- Fix of_property_read_string() errors to match documentation
- Ignore disabled nodes in FDT API calls"
* tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits)
of/irq: fix typo in comment
dt-bindings: Fix properties without any type
Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example"
dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings
dt-bindings: timer: samsung,exynos4210-mct: define strict clock order
dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems
dt-bindings: timer: cdns,ttc: drop unneeded minItems
dt-bindings: mailbox: zynqmp_ipi: convert to yaml
dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
dt-bindings: net: add schema for ASIX USB Ethernet controllers
of/fdt: Ignore disabled memory nodes
dt-bindings: arm: fix typos in compatible
dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360
dt-bindings: display: convert Arm Komeda to DT schema
dt-bindings: display: convert Arm Mali-DP to DT schema
dt-bindings: display: convert Arm HDLCD to DT schema
dt-bindings: display: convert PL110/PL111 to DT schema
dt-bindings: arm: convert vexpress-config to DT schema
dt-bindings: arm: convert vexpress-sysregs to DT schema
...
- Airoha EN7523 SoC system clocks
- Use i2c driver probe_new to avoid id scans
* clk-ti:
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
clk: keystone: syscon-clk: Add support for AM62 epwm-tbclk
dt-bindings: clock: ehrpwm: Add AM62 specific compatible
* clk-cleanup:
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: fixed-rate: Remove redundant if statement
clk: mux: remove redundant initialization of variable width
clk: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
clk: actions: remove redundant assignment after a mask operation
* clk-airoha:
clk: en7523: fix wrong pointer check in en7523_clk_probe()
clk: en7523: Add clock driver for Airoha EN7523 SoC
dt-bindings: Add en7523-scu device tree binding documentation
* clk-i2c-simple:
clk: renesas-pcie: use simple i2c probe function
clk: si570: use i2c_match_id and simple i2c probe
clk: si544: use i2c_match_id and simple i2c probe
clk: si5351: use i2c_match_id and simple i2c probe
clk: si5341: use simple i2c probe function
clk: si514: use simple i2c probe function
clk: max9485: use simple i2c probe function
clk: cs2000-cp: use simple i2c probe function
clk: cdce925: use i2c_match_id and simple i2c probe
clk: cdce706: use simple i2c probe function
* clk-renesas: (48 commits)
clk: renesas: r9a09g011: Add eth clock and reset entries
clk: renesas: Add RZ/V2M support using the rzg2l driver
clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg
clk: renesas: rzg2l: Make use of CLK_MON registers optional
clk: renesas: rzg2l: Set HIWORD mask for all mux and dividers
clk: renesas: rzg2l: Add read only versions of the clk macros
clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macro
dt-bindings: clock: renesas,rzg2l: Document RZ/V2M SoC
clk: renesas: r9a07g044: Fix OSTM1 module clock name
clk: renesas: r9a07g043: Add clock and reset entries for ADC
clk: renesas: r9a07g043: Add TSU clock and reset entry
clk: renesas: r9a07g043: Add RSPI clock and reset entries
clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus Controller
clk: renesas: r9a07g044: Add DSI clock and reset entries
clk: renesas: r9a07g044: Add LCDC clock and reset entries
clk: renesas: r9a07g044: Add M4 Clock support
clk: renesas: r9a07g044: Add M3 Clock support
clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks support
clk: renesas: r9a07g044: Add M1 clock support
clk: renesas: rzg2l: Add DSI divider clk support
...
The contents of the clock binding have been moved to the clock binding
schema in the dtschema repository. The desire is for common bindings to
be hosted in the dtschema repository.
Replace the contents with a link to the clock binding schema as there
are still many references to clock-bindings.txt in the tree. This will
prevent additions without a schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220428154154.2284317-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Qualcomm ARM64 DT updates for v5.19
This adds MDIO bus description on the IPQ6018 platform.
On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei
Ascend G7 gains sound card definition and clarified installation
instructions.
MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock
controller, on-chip memory, watchdog and various cleanup changes. The
Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer
definition, while Huawei Nexus 6P gains eMMC support.
On MSM8996 the modem and sensor remtoeprocs are added and enabled in the
Dragonboard 820c and the Xiaomi devices.
On MSM8998 a few newly added clocks related to the sensor subsystem bus
are marked as protected by default and the OnePlus devices gains NFC.
The SC7180 platform and devices thereon are further polished and
limozeen moves to using edp-panel for EDID-based detection, over
statically defined panels.
On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio
clocks, resets for SDCC controllers and a new CRD revision are added. A
supply glitch on the PCIe power and a current leak for Bluetooth during
suspend are corrected. The Herobrine board gains eDP support and the IDP
gains backlight. USB is marked wakeup capable.
On SDM845 the IPA, WLED based backlight and second WiFi channel are
enabled for Xiaomi Pocophone F1, the firmware name is modified to not
conflict with other boards. On RB3 the CAN bus controller is added and
the WiFi calibration variant is defined to allow adding the board's
calibration information into linux-firmware.
SM6350 gains I2C busses, UFS and WiFi support, and the numbering of
uart9 is corrected.
On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled.
On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for
the SA8155p ADP board. The PDC interrupt controller is also added and
described as wakup interrupt parent for TLMM.
Camera subsystem and control interface are defined for SM8250. On the
Sony Xperia 1 II the audio amplifiers are enabled.
On SM8350 GPI DMA engines are added and linked to the I2C and SPI
serial engines. Surface Duo 2 gains battery charger support.
On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP
serial engine instances are added. Remoteproc instances are enabled on
SM8450 HDK.
Last, but not least, a number of DeviceTree validation errors across
various boards are corrected.
* tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (150 commits)
arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling
arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling
arm64: dts: qcom: sc7280: eDP for herobrine boards
arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP
arm64: dts: qcom: sm8150: Fix iommu sid value for SDC2 controller
arm64: dts: qcom: sm8350-duo2: enable battery charger
arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2
arm64: dts: qcom: pm8350c: Add pwm support
arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7180: Remove ipa interconnect node
arm64: dts: qcom: sc7280-idp: Enable GPI DMAs
arm64: dts: qcom: sc7280: Add GENI I2C/SPI DMA channels
arm64: dts: qcom: sc7280: Add GPI DMAengines
arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@)
arm64: dts: qcom: db845c: Add support for MCP2517FD
arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name
arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd
arm64: dts: qcom: sm8250: camss: Add CCI definitions
...
Link: https://lore.kernel.org/r/20220509204451.325675-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull devicetree fixes from Rob Herring:
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
* tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pci: apple,pcie: Drop max-link-speed from example
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
dt-bindings: ufs: cdns,ufshc: Add power-domains
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: reset: stm32mp15: rename RST_SCMI define
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
dt-bindings: rcc: Add optional external ethernet RX clock properties
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
ARM: dts: stm32: add support for Protonic PRTT1x boards
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
dt-bindings: arm: stm32: correct blank lines
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
...
Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
