Johannes Berg says:
====================
Some more fixes:
- iwlwifi: fix 130/1030 devices
- ath12k: fix alignment, power save
- virt_wifi: fix crash
- cfg80211: disable per-link stats due
to buffer size issues
* tag 'wireless-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: completely disable per-link stats for now
wifi: virt_wifi: Fix page fault on connect
wifi: cfg80211: Fix "no buffer space available" error in nl80211_get_station() for MLO
wifi: iwlwifi: fix 130/1030 configs
wifi: ath12k: fix WMI TLV header misalignment
wifi: ath12k: Fix missing station power save configuration
====================
Link: https://patch.msgid.link/20250911100345.20025-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marc Kleine-Budde says:
====================
pull-request: can 2025-09-10
The 1st patch is by Alex Tran and fixes the Documentation of the
struct bcm_msg_head.
Davide Caratti's patch enabled the VCAN driver as a module for the
Linux self tests.
Tetsuo Handa contributes 3 patches that fix various problems in the
CAN j1939 protocol.
Anssi Hannula's patch fixes a potential use-after-free in the
xilinx_can driver.
Geert Uytterhoeven's patch fixes the rcan_can's suspend to RAM on
R-Car Gen3 using PSCI.
* tag 'linux-can-fixes-for-6.17-20250910' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
docs: networking: can: change bcm_msg_head frames member to support flexible array
====================
Link: https://patch.msgid.link/20250910162907.948454-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-09 (igb, i40e)
For igb:
Tianyu Xu removes passing of, no longer needed, NAPI id to avoid NULL
pointer dereference on ethtool loopback testing.
Kohei Enju corrects reporting/testing of link state when interface is
down.
For i40e:
Michal Schmidt corrects value being passed to free_irq().
Jake sets hardware maximum frame size on probe to ensure
expected/consistent state.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix Jumbo Frame support after iPXE boot
i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path
igb: fix link test skipping when interface is admin down
igb: Fix NULL pointer dereference in ethtool loopback test
====================
Link: https://patch.msgid.link/20250909203236.3603960-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop phylink_{suspend,resume}() from ax88772 PM callbacks.
MDIO bus accesses have their own runtime-PM handling and will try to
wake the device if it is suspended. Such wake attempts must not happen
from PM callbacks while the device PM lock is held. Since phylink
{sus|re}sume may trigger MDIO, it must not be called in PM context.
No extra phylink PM handling is required for this driver:
- .ndo_open/.ndo_stop control the phylink start/stop lifecycle.
- ethtool/phylib entry points run in process context, not PM.
- phylink MAC ops program the MAC on link changes after resume.
Fixes: e0bffe3e68 ("net: asix: ax88772: migrate to phylink")
Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20250908112619.2900723-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
can_put_echo_skb() takes ownership of the SKB and it may be freed
during or after the call.
However, xilinx_can xcan_write_frame() keeps using SKB after the call.
Fix that by only calling can_put_echo_skb() after the code is done
touching the SKB.
The tx_lock is held for the entire xcan_write_frame() execution and
also on the can_get_echo_skb() side so the order of operations does not
matter.
An earlier fix commit 3d3c817c3a ("can: xilinx_can: Fix usage of skb
memory") did not move the can_put_echo_skb() call far enough.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Fixes: 1598efe57b ("can: xilinx_can: refactor code in preparation for CAN FD support")
Link: https://patch.msgid.link/20250822095002.168389-1-anssi.hannula@bitwise.fi
[mkl: add "commit" in front of sha1 in patch description]
[mkl: fix indention]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Miri Korenblit says:
====================
iwlwifi fix
====================
Which is a fix for (old) 130/1030 devices to work again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Syzkaller managed to lock the lower device via ETHTOOL_SFEATURES:
netdev_lock include/linux/netdevice.h:2761 [inline]
netdev_lock_ops include/net/netdev_lock.h:42 [inline]
netdev_sync_lower_features net/core/dev.c:10649 [inline]
__netdev_update_features+0xcb1/0x1be0 net/core/dev.c:10819
netdev_update_features+0x6d/0xe0 net/core/dev.c:10876
macsec_notify+0x2f5/0x660 drivers/net/macsec.c:4533
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2267 [inline]
call_netdevice_notifiers net/core/dev.c:2281 [inline]
netdev_features_change+0x85/0xc0 net/core/dev.c:1570
__dev_ethtool net/ethtool/ioctl.c:3469 [inline]
dev_ethtool+0x1536/0x19b0 net/ethtool/ioctl.c:3502
dev_ioctl+0x392/0x1150 net/core/dev_ioctl.c:759
It happens because lower features are out of sync with the upper:
__dev_ethtool (real_dev)
netdev_lock_ops(real_dev)
ETHTOOL_SFEATURES
__netdev_features_change
netdev_sync_upper_features
disable LRO on the lower
if (old_features != dev->features)
netdev_features_change
fires NETDEV_FEAT_CHANGE
macsec_notify
NETDEV_FEAT_CHANGE
netdev_update_features (for each macsec dev)
netdev_sync_lower_features
if (upper_features != lower_features)
netdev_lock_ops(lower) # lower == real_dev
stuck
...
netdev_unlock_ops(real_dev)
Per commit af5f54b0ef ("net: Lock lower level devices when updating
features"), we elide the lock/unlock when the upper and lower features
are synced. Makes sure the lower (real_dev) has proper features after
the macsec link has been created. This makes sure we never hit the
situation where we need to sync upper flags to the lower.
Reported-by: syzbot+7e0f89fb6cae5d002de0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7e0f89fb6cae5d002de0
Fixes: 7e4d784f58 ("net: hold netdev instance lock during rtnetlink operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250908173614.3358264-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit changed the conditions which phylib uses to stop
and start the state machine in the suspend and resume paths, and
while improving it, has caused two issues.
The original code used this test:
phydev->attached_dev && phydev->adjust_link
and if true, the paths would handle the PHY state machine. This test
evaluates true for normal drivers that are using phylib directly
while the PHY is attached to the network device, but false in all
other cases, which include the following cases:
- when the PHY has never been attached to a network device.
- when the PHY has been detached from a network device (as phy_detach()
sets phydev->attached_dev to NULL, phy_disconnect() calls
phy_detach() and additionally sets phydev->adjust_link NULL.)
- when phylink is using the driver (as phydev->adjust_link is NULL.)
Only the third case was incorrect, and the blamed commit attempted to
fix this by changing this test to (simplified for brevity, see
phy_uses_state_machine()):
phydev->phy_link_change == phy_link_change ?
phydev->attached_dev && phydev->adjust_link : true
However, this also incorrectly evaluates true in the first two cases.
Fix the first case by ensuring that phy_uses_state_machine() returns
false when phydev->phy_link_change is NULL.
Fix the second case by ensuring that phydev->phy_link_change is set to
NULL when phy_detach() is called.
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: fc75ea20ff ("net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/E1uvMEz-00000003Aoe-3qWe@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i40e hardware has multiple hardware settings which define the Maximum
Frame Size (MFS) of the physical port. The firmware has an AdminQ command
(0x0603) to configure the MFS, but the i40e Linux driver never issues this
command.
In most cases this is no problem, as the NVM default value has the device
configured for its maximum value of 9728. Unfortunately, recent versions of
the iPXE intelxl driver now issue the 0x0603 Set Mac Config command,
modifying the MFS and reducing it from its default value of 9728.
This occurred as part of iPXE commit 6871a7de705b ("[intelxl] Use admin
queue to set port MAC address and maximum frame size"), a prerequisite
change for supporting the E800 series hardware in iPXE. Both the E700 and
E800 firmware support the AdminQ command, and the iPXE code shares much of
the logic between the two device drivers.
The ice E800 Linux driver already issues the 0x0603 Set Mac Config command
early during probe, and is thus unaffected by the iPXE change.
Since commit 3a2c6ced90 ("i40e: Add a check to see if MFS is set"), the
i40e driver does check the I40E_PRTGL_SAH register, but it only logs a
warning message if its value is below the 9728 default. This register also
only covers received packets and not transmitted packets. A warning can
inform system administrators, but does not correct the issue. No
interactions from userspace cause the driver to write to PRTGL_SAH or issue
the 0x0603 AdminQ command. Only a GLOBR reset will restore the value to its
default value. There is no obvious method to trigger a GLOBR reset from
user space.
To fix this, introduce the i40e_aq_set_mac_config() function, similar to
the one from the ice driver. Call this during early probe to ensure that
the device configuration matches driver expectation. Unlike E800, the E700
firmware also has a bit to control whether the MAC should append CRC data.
It is on by default, but setting a 0 to this bit would disable CRC. The
i40e implementation must set this bit to ensure CRC will be appended by the
MAC.
In addition to the AQ command, instead of just checking the I40E_PRTGL_SAH
register, update its value to the 9728 default and write it back. This
ensures that the hardware is in the expected state, regardless of whether
the iPXE (or any other early boot driver) has modified this state.
This is a better user experience, as we now fix the issues with larger MTU
instead of merely warning. It also aligns with the way the ice E800 series
driver works.
A final note: The Fixes tag provided here is not strictly accurate. The
issue occurs as a result of an external entity (the iPXE intelxl driver),
and this is not a regression specifically caused by the mentioned change.
However, I believe the original change to just warn about PRTGL_SAH being
too low was an insufficient fix.
Fixes: 3a2c6ced90 ("i40e: Add a check to see if MFS is set")
Link: 6871a7de70
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration
later than the first, the error path wants to free the IRQs requested
so far. However, it uses the wrong dev_id argument for free_irq(), so
it does not free the IRQs correctly and instead triggers the warning:
Trying to free already-free IRQ 173
WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0
Modules linked in: i40e(+) [...]
CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy)
Hardware name: [...]
RIP: 0010:__free_irq+0x192/0x2c0
[...]
Call Trace:
<TASK>
free_irq+0x32/0x70
i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e]
i40e_vsi_request_irq+0x79/0x80 [i40e]
i40e_vsi_open+0x21f/0x2f0 [i40e]
i40e_open+0x63/0x130 [i40e]
__dev_open+0xfc/0x210
__dev_change_flags+0x1fc/0x240
netif_change_flags+0x27/0x70
do_setlink.isra.0+0x341/0xc70
rtnl_newlink+0x468/0x860
rtnetlink_rcv_msg+0x375/0x450
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x288/0x3c0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x3a2/0x3d0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x82/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Use the same dev_id for free_irq() as for request_irq().
I tested this with inserting code to fail intentionally.
Fixes: 493fb30011 ("i40e: Move q_vectors from pointer to array to array of pointers")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The igb driver incorrectly skips the link test when the network
interface is admin down (if_running == false), causing the test to
always report PASS regardless of the actual physical link state.
This behavior is inconsistent with other drivers (e.g. i40e, ice, ixgbe,
etc.) which correctly test the physical link state regardless of admin
state.
Remove the if_running check to ensure link test always reflects the
physical link state.
Fixes: 8d420a1b3e ("igb: correct link test not being run when link is down")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The igb driver currently causes a NULL pointer dereference when executing
the ethtool loopback test. This occurs because there is no associated
q_vector for the test ring when it is set up, as interrupts are typically
not added to the test rings.
Since commit 5ef44b3cb4 removed the napi_id assignment in
__xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it.
Therefore, simply use 0 as the last parameter.
Fixes: 2c6196013f ("igb: Add AF_XDP zero-copy Rx support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Tianyu Xu <tianyxu@cisco.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
For some reason Broadcom decided that BCM53101 uses 0.5s increments for
the ageing time register, but kept the field width the same [1]. Due to
this, the actual ageing time was always half of what was configured.
Fix this by adapting the limits and value calculation for BCM53101.
So far it looks like this is the only chip with the increased tick
speed:
$ grep -l -r "Specifies the aging time in 0.5 seconds" cdk/PKG/chip | sort
cdk/PKG/chip/bcm53101/bcm53101_a0_defs.h
$ grep -l -r "Specifies the aging time in seconds" cdk/PKG/chip | sort
cdk/PKG/chip/bcm53010/bcm53010_a0_defs.h
cdk/PKG/chip/bcm53020/bcm53020_a0_defs.h
cdk/PKG/chip/bcm53084/bcm53084_a0_defs.h
cdk/PKG/chip/bcm53115/bcm53115_a0_defs.h
cdk/PKG/chip/bcm53118/bcm53118_a0_defs.h
cdk/PKG/chip/bcm53125/bcm53125_a0_defs.h
cdk/PKG/chip/bcm53128/bcm53128_a0_defs.h
cdk/PKG/chip/bcm53134/bcm53134_a0_defs.h
cdk/PKG/chip/bcm53242/bcm53242_a0_defs.h
cdk/PKG/chip/bcm53262/bcm53262_a0_defs.h
cdk/PKG/chip/bcm53280/bcm53280_a0_defs.h
cdk/PKG/chip/bcm53280/bcm53280_b0_defs.h
cdk/PKG/chip/bcm53600/bcm53600_a0_defs.h
cdk/PKG/chip/bcm89500/bcm89500_a0_defs.h
[1] a5d3fc9b12/cdk/PKG/chip/bcm53101/bcm53101_a0_defs.h (L28966)
Fixes: e39d14a760 ("net: dsa: b53: implement setting ageing time")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250905124507.59186-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When buf_len is not 4-byte aligned in ath12k_wmi_mgmt_send(), the
firmware asserts and triggers a recovery. The following error
messages are observed:
ath12k_pci 0004:01:00.0: failed to submit WMI_MGMT_TX_SEND_CMDID cmd
ath12k_pci 0004:01:00.0: failed to send mgmt frame: -108
ath12k_pci 0004:01:00.0: failed to tx mgmt frame, vdev_id 0 :-108
ath12k_pci 0004:01:00.0: waiting recovery start...
This issue was observed when running 'iw wlanx set power_save off/on'
in MLO station mode, which triggers the sending of an SMPS action frame
with a length of 27 bytes to the AP. To resolve the misalignment, use
buf_len_aligned instead of buf_len when constructing the WMI TLV header.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250908015139.1301437-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Commit afbab6e4e8 ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed()
for MLO") replaced the bss_info_changed() callback with vif_cfg_changed()
and link_info_changed() to support Multi-Link Operation (MLO). As a result,
the station power save configuration is no longer correctly applied in
ath12k_mac_bss_info_changed().
Move the handling of 'BSS_CHANGED_PS' into ath12k_mac_op_vif_cfg_changed()
to align with the updated callback structure introduced for MLO, ensuring
proper power-save behavior for station interfaces.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: afbab6e4e8 ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed() for MLO")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250908015025.1301398-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Problem description
===================
Lockdep reports a possible circular locking dependency (AB/BA) between
&pl->state_mutex and &phy->lock, as follows.
phylink_resolve() // acquires &pl->state_mutex
-> phylink_major_config()
-> phy_config_inband() // acquires &pl->phydev->lock
whereas all the other call sites where &pl->state_mutex and
&pl->phydev->lock have the locking scheme reversed. Everywhere else,
&pl->phydev->lock is acquired at the top level, and &pl->state_mutex at
the lower level. A clear example is phylink_bringup_phy().
The outlier is the newly introduced phy_config_inband() and the existing
lock order is the correct one. To understand why it cannot be the other
way around, it is sufficient to consider phylink_phy_change(), phylink's
callback from the PHY device's phy->phy_link_change() virtual method,
invoked by the PHY state machine.
phy_link_up() and phy_link_down(), the (indirect) callers of
phylink_phy_change(), are called with &phydev->lock acquired.
Then phylink_phy_change() acquires its own &pl->state_mutex, to
serialize changes made to its pl->phy_state and pl->link_config.
So all other instances of &pl->state_mutex and &phydev->lock must be
consistent with this order.
Problem impact
==============
I think the kernel runs a serious deadlock risk if an existing
phylink_resolve() thread, which results in a phy_config_inband() call,
is concurrent with a phy_link_up() or phy_link_down() call, which will
deadlock on &pl->state_mutex in phylink_phy_change(). Practically
speaking, the impact may be limited by the slow speed of the medium
auto-negotiation protocol, which makes it unlikely for the current state
to still be unresolved when a new one is detected, but I think the
problem is there. Nonetheless, the problem was discovered using lockdep.
Proposed solution
=================
Practically speaking, the phy_config_inband() requirement of having
phydev->lock acquired must transfer to the caller (phylink is the only
caller). There, it must bubble up until immediately before
&pl->state_mutex is acquired, for the cases where that takes place.
Solution details, considerations, notes
=======================================
This is the phy_config_inband() call graph:
sfp_upstream_ops :: connect_phy()
|
v
phylink_sfp_connect_phy()
|
v
phylink_sfp_config_phy()
|
| sfp_upstream_ops :: module_insert()
| |
| v
| phylink_sfp_module_insert()
| |
| | sfp_upstream_ops :: module_start()
| | |
| | v
| | phylink_sfp_module_start()
| | |
| v v
| phylink_sfp_config_optical()
phylink_start() | |
| phylink_resume() v v
| | phylink_sfp_set_config()
| | |
v v v
phylink_mac_initial_config()
| phylink_resolve()
| | phylink_ethtool_ksettings_set()
v v v
phylink_major_config()
|
v
phy_config_inband()
phylink_major_config() caller #1, phylink_mac_initial_config(), does not
acquire &pl->state_mutex nor do its callers. It must acquire
&pl->phydev->lock prior to calling phylink_major_config().
phylink_major_config() caller #2, phylink_resolve() acquires
&pl->state_mutex, thus also needs to acquire &pl->phydev->lock.
phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is
completely uninteresting, because it only calls phylink_major_config()
if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()).
We need to change nothing there.
Other solutions
===============
The lock inversion between &pl->state_mutex and &pl->phydev->lock has
occurred at least once before, as seen in commit c718af2d00 ("net:
phylink: fix ethtool -A with attached PHYs"). The solution there was to
simply not call phy_set_asym_pause() under the &pl->state_mutex. That
cannot be extended to our case though, where the phy_config_inband()
call is much deeper inside the &pl->state_mutex section.
Fixes: 5fd0f1a02e ("net: phylink: add negotiation of in-band capabilities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently phylink_resolve() protects itself against concurrent
phylink_bringup_phy() or phylink_disconnect_phy() calls which modify
pl->phydev by relying on pl->state_mutex.
The problem is that in phylink_resolve(), pl->state_mutex is in a lock
inversion state with pl->phydev->lock. So pl->phydev->lock needs to be
acquired prior to pl->state_mutex. But that requires dereferencing
pl->phydev in the first place, and without pl->state_mutex, that is
racy.
Hence the reason for the extra lock. Currently it is redundant, but it
will serve a functional purpose once mutex_lock(&phy->lock) will be
moved outside of the mutex_lock(&pl->state_mutex) section.
Another alternative considered would have been to let phylink_resolve()
acquire the rtnl_mutex, which is also held when phylink_bringup_phy()
and phylink_disconnect_phy() are called. But since phylink_disconnect_phy()
runs under rtnl_lock(), it would deadlock with phylink_resolve() when
calling flush_work(&pl->resolve). Additionally, it would have been
undesirable because it would have unnecessarily blocked many other call
paths as well in the entire kernel, so the smaller-scoped lock was
preferred.
Link: https://lore.kernel.org/netdev/aLb6puGVzR29GpPx@shell.armlinux.org.uk/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When transmitting a PTP frame which is timestamp using 2 step, the
following warning appears if CONFIG_PROVE_LOCKING is enabled:
=============================
[ BUG: Invalid wait context ]
6.17.0-rc1-00326-ge6160462704e #427 Not tainted
-----------------------------
ptp4l/119 is trying to lock:
c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac
other info that might help us debug this:
context-{4:4}
4 locks held by ptp4l/119:
#0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440
#1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440
#2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350
#3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350
stack backtrace:
CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __lock_acquire+0x8e8/0x29dc
__lock_acquire from lock_acquire+0x108/0x38c
lock_acquire from __mutex_lock+0xb0/0xe78
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac
vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8
lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350
lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0
dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350
sch_direct_xmit from __dev_queue_xmit+0x680/0x1440
__dev_queue_xmit from packet_sendmsg+0xfa4/0x1568
packet_sendmsg from __sys_sendto+0x110/0x19c
__sys_sendto from sys_send+0x18/0x20
sys_send from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b05fa8 to 0xf0b05ff0)
5fa0: 00000001 0000000e 0000000e 0004b47a 0000003a 00000000
5fc0: 00000001 0000000e 00000000 00000121 0004af58 00044874 00000000 00000000
5fe0: 00000001 bee9d420 00025a10 b6e75c7c
So, instead of using the ts_lock for tx_queue, use the spinlock that
skb_buff_head has.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Fixes: 7d272e63e0 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If alloc_skb() fails in pad_compress_skb(), it returns NULL without
releasing the old skb. The caller does:
skb = pad_compress_skb(ppp, skb);
if (!skb)
goto drop;
drop:
kfree_skb(skb);
When pad_compress_skb() returns NULL, the reference to the old skb is
lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.
Align pad_compress_skb() semantics with realloc(): only free the old
skb if allocation and compression succeed. At the call site, use the
new_skb variable so the original skb is not lost when pad_compress_skb()
fails.
Fixes: b3f9b92a6e ("[PPP]: add PPP MPPE encryption module")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250903100726.269839-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add proper error checking for dmaengine_desc_get_metadata_ptr() which
can return an error pointer and lead to potential crashes or undefined
behaviour if the pointer retrieval fails.
Properly handle the error by unmapping DMA buffer, freeing the skb and
returning early to prevent further processing with invalid data.
Fixes: 6a91b846af ("net: axienet: Introduce dmaengine support")
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20250903025213.3120181-1-abin.joseph@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit added code which could return an error after we
requested the PHY interrupt. When we return an error, the caller
will call phy_detach() which fails to free the interrupt.
Rearrange the code such that failing operations happen before the
interrupt is requested, thereby allowing phy_detach() to be used.
Note that replacing phy_detach() with phy_disconnect() in these
paths could lead to freeing an interrupt which was never requested.
Fixes: 1942b1c6f6 ("net: phylink: make configuring clock-stop dependent on MAC support")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1ut35k-00000001UEl-0iq6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-02 (ice, idpf, i40e, ixgbe, e1000e)
For ice:
Jake adds checks for initialization of Tx timestamp tracking structure
to prevent NULL pointer dereferences.
For idpf:
Josh moves freeing of auxiliary device id to prevent use-after-free issue.
Emil sets, expected, MAC type value when sending virtchnl add/delete MAC
commands.
For i40e:
Jake removes read debugfs access as 'netdev_ops' has the possibility to
overflow.
Zhen Ni adds handling for when MAC list is empty.
For ixgbe:
Alok Tiwari corrects bitmap being used for link speeds.
For e1000e:
Vitaly adds check to ensure overflow does not occur in
e1000_set_eeprom().
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: fix heap overflow in e1000_set_eeprom
ixgbe: fix incorrect map used in eee linkmode
i40e: Fix potential invalid access when MAC list is empty
i40e: remove read access to debugfs files
idpf: set mac type when adding and removing MAC filters
idpf: fix UAF in RDMA core aux dev deinitialization
ice: fix NULL access of tx->in_use in ice_ll_ts_intr
ice: fix NULL access of tx->in_use in ice_ptp_ts_irq
====================
Link: https://patch.msgid.link/20250902232131.2739555-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Just a few updates:
- a set of buffer overflow fixes
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability
* tag 'wireless-2025-09-03' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
wifi: libertas: cap SSID len in lbs_associate()
wifi: cw1200: cap SSID length in cw1200_do_join()
wifi: ath11k: fix group data packet drops during rekey
wifi: ath12k: Set EMLSR support flag in MLO flags for EML-capable stations
====================
Link: https://patch.msgid.link/20250903075602.30263-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeff Johnson says:
==================
ath.git update for v6.17-rc5
Fix a long-standing issue with ath11k dropping group data packets
during GTK rekey, and fix an omission in the ath12k multi-link EMLSR
support introduced in v6.16.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix multiple fwnode reference leaks:
1. The function calls fwnode_get_named_child_node() to get the "leds" node,
but never calls fwnode_handle_put(leds) to release this reference.
2. Within the fwnode_for_each_child_node() loop, the early return
paths that don't properly release the "led" fwnode reference.
This fix follows the same pattern as commit d029edefed
("net dsa: qca8k: fix usages of device_get_named_child_node()")
Fixes: 94a2a84f5e ("net: dsa: mv88e6xxx: Support LED control")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250901073224.2273103-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the "proxy" option is enabled on a VXLAN device, the device will
suppress ARP requests and IPv6 Neighbor Solicitation messages if it is
able to reply on behalf of the remote host. That is, if a matching and
valid neighbor entry is configured on the VXLAN device whose MAC address
is not behind the "any" remote (0.0.0.0 / ::).
The code currently assumes that the FDB entry for the neighbor's MAC
address points to a valid remote destination, but this is incorrect if
the entry is associated with an FDB nexthop group. This can result in a
NPD [1][3] which can be reproduced using [2][4].
Fix by checking that the remote destination exists before dereferencing
it.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_xmit+0xb58/0x15f0
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip nexthop add id 1 via 192.0.2.2 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy
ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3
[3]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014
RIP: 0010:vxlan_xmit+0x803/0x1600
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
ip6_finish_output2+0x210/0x6c0
ip6_finish_output+0x1af/0x2b0
ip6_mr_output+0x92/0x3e0
ip6_send_skb+0x30/0x90
rawv6_sendmsg+0xe6e/0x12e0
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f383422ec77
[4]
#!/bin/bash
ip address add 2001:db8:1::1/128 dev lo
ip nexthop add id 1 via 2001:db8:1::1 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy
ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0
Fixes: 1274e1cc42 ("vxlan: ecmp support for mac fdb entries")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VXLAN FDB entries can point to either a remote destination or an FDB
nexthop group. The latter is usually used in EVPN deployments where
learning is disabled.
However, when learning is enabled, an incoming packet might try to
refresh an FDB entry that points to an FDB nexthop group and therefore
does not have a remote. Such packets should be dropped, but they are
only dropped after dereferencing the non-existent remote, resulting in a
NPD [1] which can be reproduced using [2].
Fix by dropping such packets earlier. Remove the misleading comment from
first_remote_rcu().
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_snoop+0x98/0x1e0
[...]
Call Trace:
<TASK>
vxlan_encap_bypass+0x209/0x240
encap_bypass_if_local+0xb1/0x100
vxlan_xmit_one+0x1375/0x17e0
vxlan_xmit+0x6b4/0x15f0
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip address add 192.0.2.2/32 dev lo
ip nexthop add id 1 via 192.0.2.3 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass
ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020
bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10
mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q
Fixes: 1274e1cc42 ("vxlan: ecmp support for mac fdb entries")
Reported-by: Marlin Cremers <mcremers@cloudbear.nl>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mathew reports that as a result of commit 6561f0e547 ("net: pcs:
pcs-lynx: implement pcs_inband_caps() method"), 10G SFP modules no
longer work with the Lynx PCS.
This problem is not specific to the Lynx PCS, but is caused by commit
df874f9e52 ("net: phylink: add pcs_inband_caps() method") which added
validation of the autoneg state to the optical SFP configuration path.
Fix this by handling interface modes that fundamentally have no
inband negotiation more correctly - if we only have a single interface
mode, clear the Autoneg support bit and the advertising mask. If the
module can operate with several different interface modes, autoneg may
be supported for other modes, so leave the support mask alone and just
clear the Autoneg bit in the advertising mask.
This restores 10G optical module functionality with PCS that supply
their inband support, and makes ethtool output look sane.
Reported-by: Mathew McBride <matt@traverse.com.au>
Closes: https://lore.kernel.org/r/025c0ebe-5537-4fa3-b05a-8b835e5ad317@app.fastmail.com
Fixes: df874f9e52 ("net: phylink: add pcs_inband_caps() method")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/E1uslwx-00000001SPB-2kiM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 8401a108a6.
I got a report from an (anonymous) Sundance user:
Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)
Revert the driver back in. Make following changes:
- update Denis's email address in MAINTAINERS
- adjust to timer API renames:
- del_timer_sync() -> timer_delete_sync()
- from_timer() -> timer_container_of()
Fixes: 8401a108a6 ("eth: remove the DLink/Sundance (ST201) driver")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901210818.1025316-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During GTK rekey, mac80211 issues a clear key (if the old key exists)
followed by an install key operation in the same context. This causes
ath11k to send two WMI commands in quick succession: one to clear the
old key and another to install the new key in the same slot.
Under certain conditions—especially under high load or time sensitive
scenarios, firmware may process these commands asynchronously in a way
that firmware assumes the key is cleared whereas hardware has a valid key.
This inconsistency between hardware and firmware leads to group addressed
packet drops. Only setting the same key again can restore a valid key in
firmware and allow packets to be transmitted.
This issue remained latent because the host's clear key commands were
not effective in firmware until commit 436a4e8865 ("ath11k: clear the
keys properly via DISABLE_KEY"). That commit enabled the host to
explicitly clear group keys, which inadvertently exposed the race.
To mitigate this, restrict group key clearing across all modes (AP, STA,
MESH). During rekey, the new key can simply be set on top of the previous
one, avoiding the need for a clear followed by a set.
However, in AP mode specifically, permit group key clearing when no
stations are associated. This exception supports transitions from secure
modes (e.g., WPA2/WPA3) to open mode, during which all associated peers
are removed and the group key is cleared as part of the transition.
Add a per-BSS station counter to track the presence of stations during
set key operations. Also add a reset_group_keys flag to track the key
re-installation state and avoid repeated installation of the same key
when the number of connected stations transitions to non-zero within a
rekey period.
Additionally, for AP and Mesh modes, when the first station associates,
reinstall the same group key that was last set. This ensures that the
firmware recovers from any race that may have occurred during a previous
key clear when no stations were associated.
This change ensures that key clearing is permitted only when no clients
are connected, avoiding packet loss while enabling dynamic security mode
transitions.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Reported-by: Steffen Moser <lists@steffen-moser.de>
Closes: https://lore.kernel.org/linux-wireless/c6366409-9928-4dd7-bf7b-ba7fcf20eabf@steffen-moser.de
Fixes: 436a4e8865 ("ath11k: clear the keys properly via DISABLE_KEY")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250810170018.1124014-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, when updating EMLSR capabilities of a multi-link (ML) station,
only the EMLSR parameters (e.g., padding delay, transition delay, and
timeout) are sent to firmware. However, firmware also requires the
EMLSR support flag to be set in the MLO flags of the peer assoc WMI
command to properly handle EML operating mode notification frames.
Set the ATH12K_WMI_FLAG_MLO_EMLSR_SUPPORT flag in the peer assoc WMI
command when the ML station is EMLSR-capable, so that the firmware can
respond to EHT EML action frames from associated stations.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 4bcf9525bc ("wifi: ath12k: update EMLSR capabilities of ML Station")
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250801104920.3326352-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Co-developed-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
