mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-02-15 17:56:26 -05:00
01fce21e1a890462ba1f37b577fc96c10753c608
4184 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
0f46f50845 |
Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ... |
||
|
Linus Torvalds
|
6e11664f14 |
Merge tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
||
|
Linus Torvalds
|
278c7d9b5e |
Merge tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fallocate updates from Christian Brauner:
"fallocate() currently supports creating preallocated files
efficiently. However, on most filesystems fallocate() will preallocate
blocks in an unwriten state even if FALLOC_FL_ZERO_RANGE is specified.
The extent state must later be converted to a written state when the
user writes data into this range, which can trigger numerous metadata
changes and journal I/O. This may leads to significant write
amplification and performance degradation in synchronous write mode.
At the moment, the only method to avoid this is to create an empty
file and write zero data into it (for example, using 'dd' with a large
block size). However, this method is slow and consumes a considerable
amount of disk bandwidth.
Now that more and more flash-based storage devices are available it is
possible to efficiently write zeros to SSDs using the unmap write
zeroes command if the devices do not write physical zeroes to the
media.
For example, if SCSI SSDs support the UMMAP bit or NVMe SSDs support
the DEAC bit[1], the write zeroes command does not write actual data
to the device, instead, NVMe converts the zeroed range to a
deallocated state, which works fast and consumes almost no disk write
bandwidth.
This series implements the BLK_FEAT_WRITE_ZEROES_UNMAP feature and
BLK_FLAG_WRITE_ZEROES_UNMAP_DISABLED flag for SCSI, NVMe and
device-mapper drivers, and add the FALLOC_FL_WRITE_ZEROES and
STATX_ATTR_WRITE_ZEROES_UNMAP support for ext4 and raw bdev devices.
fallocate() is subsequently extended with the FALLOC_FL_WRITE_ZEROES
flag. FALLOC_FL_WRITE_ZEROES zeroes a specified file range in such a
way that subsequent writes to that range do not require further
changes to the file mapping metadata. This flag is beneficial for
subsequent pure overwriting within this range, as it can save on block
allocation and, consequently, significant metadata changes"
* tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ext4: add FALLOC_FL_WRITE_ZEROES support
block: add FALLOC_FL_WRITE_ZEROES support
block: factor out common part in blkdev_fallocate()
fs: introduce FALLOC_FL_WRITE_ZEROES to fallocate
dm: clear unmap write zeroes limits when disabling write zeroes
scsi: sd: set max_hw_wzeroes_unmap_sectors if device supports SD_ZERO_*_UNMAP
nvmet: set WZDS and DRB if device enables unmap write zeroes operation
nvme: set max_hw_wzeroes_unmap_sectors if device supports DEAC bit
block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits
|
||
|
Linus Torvalds
|
ce3f5bb750 |
Merge tag 'nfsd-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever: "NFSD is finally able to offer write delegations to clients that open files with O_WRONLY, thanks to patches from Dai Ngo. We're expecting this to accelerate a few interesting corner cases. The cap on the number of operations per NFSv4 COMPOUND has been lifted. Now, clients that send COMPOUNDs containing dozens of operations (for example, a long stream of LOOKUP operations to walk a pathname in a single round trip) will no longer be rejected. This release re-enables the ability for NFSD to perform NFSv4.2 COPY operations asynchronously. This feature has been disabled to mitigate the risk of denial-of-service when too many such requests arrive. Many thanks to the contributors, reviewers, testers, and bug reporters who participated during the v6.17 development cycle" * tag 'nfsd-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (32 commits) nfsd: Drop dprintk in blocklayout xdr functions sunrpc: make svc_tcp_sendmsg() take a signed sentp pointer sunrpc: rearrange struct svc_rqst for fewer cachelines sunrpc: return better error in svcauth_gss_accept() on alloc failure sunrpc: reset rq_accept_statp when starting a new RPC sunrpc: remove SVC_SYSERR sunrpc: fix handling of unknown auth status codes NFSD: Simplify struct knfsd_fh NFSD: Access a knfsd_fh's fsid by pointer Revert "NFSD: Force all NFSv4.2 COPY requests to be synchronous" NFSD: Avoid multiple -Wflex-array-member-not-at-end warnings NFSD: Use vfs_iocb_iter_write() NFSD: Use vfs_iocb_iter_read() NFSD: Clean up kdoc for nfsd_open_local_fh() NFSD: Clean up kdoc for nfsd_file_put_local() NFSD: Remove definition for trace_nfsd_ctl_maxconn NFSD: Remove definition for trace_nfsd_file_gc_recent NFSD: Remove definitions for unused trace_nfsd_file_lru trace points NFSD: Remove definition for trace_nfsd_file_unhash_and_queue nfsd: Use correct error code when decoding extents ... |
||
|
David Sterba
|
44892c5a3e |
btrfs: tree-log: add and rename extent bits for dirty_log_pages tree
The dirty_log_pages tree is used for tree logging and marks extents based on log_transid. The bits could be renamed to resemble the LOG1/LOG2 naming used for the BTRFS_FS_LOG1_ERR bits. The DIRTY bit is renamed to LOG1 and NEW to LOG2. Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
b769777d92 |
btrfs: use refcount_t type for the extent buffer reference counter
Instead of using a bare atomic, use the refcount_t type, which despite
being a structure that contains only an atomic, has an API that checks
for underflows and other hazards. This doesn't change the size of the
extent_buffer structure.
This removes the need to do things like this:
WARN_ON(atomic_read(&eb->refs) == 0);
if (atomic_dec_and_test(&eb->refs)) {
(...)
}
And do just:
if (refcount_dec_and_test(&eb->refs)) {
(...)
}
Since refcount_dec_and_test() already triggers a warning when we decrement
a ref count that has a value of 0 (or below zero).
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Arnd Bergmann
|
753355d620 |
Merge tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.17 1. A fix is introduced to correct turbo frequency marking for 64-bit devices with sustained frequencies over 4GHz, ensuring accurate turbo frequency identification. 2. Debug capabilities are being improved by introducing in-flight transfer tracking using debug counters, which help diagnose transfer congestion and behavior. Additional tracepoints are added to log in-flight counts at transfer begin and end, offering better runtime insight. The debug counters now support decrement operations using a newly added scmi_dec_count helper, making counter tracking symmetric and more robust. 3. A race condition in suspend-resume logic is being resolved by ensuring SCMI_SYSPOWER_IDLE state is set early during resume, improving suspend reliability under certain conditions. New suspend and resume operations are added to the scmi_bus_type to enable finer power management control for SCMI-based devices. 4. Finally enhancements are also made to avoid registering notifiers for events that a platform does not support, reducing unnecessary overhead by checking for unsupported event types during protocolinitialization. * tag 'scmi-updates-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Convert to SYSTEM_SLEEP_PM_OPS firmware: arm_scmi: Avoid notifier registration for unsupported events firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume firmware: arm_scmi: Add power management operations to SCMI bus include: trace: Add tracepoint support for inflight xfer count firmware: arm_scmi: Track number of inflight SCMI transfers firmware: arm_scmi: Add support for debug counter decrement firmware: arm_scmi: Fix up turbo frequencies selection Link: https://lore.kernel.org/r/20250709122907.1171913-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
1c6aa1121e |
Merge tag 'vfs-6.16-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner: - Fix a memory leak in fcntl_dirnotify() - Raise SB_I_NOEXEC on secrement superblock instead of messing with flags on the mount - Add fsdevel and block mailing lists to uio entry. We had a few instances were very questionable stuff was added without either block or the VFS being aware of it - Fix netfs copy-to-cache so that it performs collection with ceph+fscache - Fix netfs race between cache write completion and ALL_QUEUED being set - Verify the inode mode when loading entries from disk in isofs - Avoid state_lock in iomap_set_range_uptodate() - Fix PIDFD_INFO_COREDUMP check in PIDFD_GET_INFO ioctl - Fix the incorrect return value in __cachefiles_write() * tag 'vfs-6.16-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: MAINTAINERS: add block and fsdevel lists to iov_iter netfs: Fix race between cache write completion and ALL_QUEUED being set netfs: Fix copy-to-cache so that it performs collection with ceph+fscache fix a leak in fcntl_dirnotify() iomap: avoid unnecessary ifs_set_range_uptodate() with locks isofs: Verify inode mode when loading from disk cachefiles: Fix the incorrect return value in __cachefiles_write() secretmem: use SB_I_NOEXEC coredump: fix PIDFD_INFO_COREDUMP ioctl check |
||
|
David Howells
|
2fd895842d |
rxrpc: Fix notification vs call-release vs recvmsg
When a call is released, rxrpc takes the spinlock and removes it from
->recvmsg_q in an effort to prevent racing recvmsg() invocations from
seeing the same call. Now, rxrpc_recvmsg() only takes the spinlock when
actually removing a call from the queue; it doesn't, however, take it in
the lead up to that when it checks to see if the queue is empty. It *does*
hold the socket lock, which prevents a recvmsg/recvmsg race - but this
doesn't prevent sendmsg from ending the call because sendmsg() drops the
socket lock and relies on the call->user_mutex.
Fix this by firstly removing the bit in rxrpc_release_call() that dequeues
the released call and, instead, rely on recvmsg() to simply discard
released calls (done in a preceding fix).
Secondly, rxrpc_notify_socket() is abandoned if the call is already marked
as released rather than trying to be clever by setting both pointers in
call->recvmsg_link to NULL to trick list_empty(). This isn't perfect and
can still race, resulting in a released call on the queue, but recvmsg()
will now clean that up.
Fixes:
|
||
|
David Howells
|
962fb1f651 |
rxrpc: Fix recv-recv race of completed call
If a call receives an event (such as incoming data), the call gets placed
on the socket's queue and a thread in recvmsg can be awakened to go and
process it. Once the thread has picked up the call off of the queue,
further events will cause it to be requeued, and once the socket lock is
dropped (recvmsg uses call->user_mutex to allow the socket to be used in
parallel), a second thread can come in and its recvmsg can pop the call off
the socket queue again.
In such a case, the first thread will be receiving stuff from the call and
the second thread will be blocked on call->user_mutex. The first thread
can, at this point, process both the event that it picked call for and the
event that the second thread picked the call for and may see the call
terminate - in which case the call will be "released", decoupling the call
from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control
message).
The first thread will return okay, but then the second thread will wake up
holding the user_mutex and, if it sees that the call has been released by
the first thread, it will BUG thusly:
kernel BUG at net/rxrpc/recvmsg.c:474!
Fix this by just dequeuing the call and ignoring it if it is seen to be
already released. We can't tell userspace about it anyway as the user call
ID has become stale.
Fixes:
|
||
|
Johannes Thumshirn
|
ab17ead0e0 |
block: fix blk_zone_append_update_request_bio() kernel-doc
Stephen reported new 'make htmldocs' warnings introduced by |
||
|
Johannes Thumshirn
|
2e92ac61c9 |
block: add trace messages to zone write plugging
Add tracepoints to zone write plugging plug and unplug events. Examples for these events are: kworker/u10:4-393 [001] d..1. 282.991660: disk_zone_wplug_add_bio: 8,0 zone 16, BIO 8388608 + 128 kworker/0:1H-58 [ [000] d..1. 283.083294: blk_zone_wplug_bio: 8,0 zone 15, BIO 7864320 + 128 Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250715115324.53308-6-johannes.thumshirn@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Johannes Thumshirn
|
4020d22f0d |
block: add tracepoint for blkdev_zone_mgmt
Add a tracepoint for blkdev_zone_mgmt to trace zone management commands submitted by higher layers like file systems or user space. An example output for this tracepoint is as follows: mkfs.btrfs-203 [001] ..... 42.877493: blkdev_zone_mgmt: 8,0 ZRS 5242880 + 0 This example output shows a REQ_OP_ZONE_RESET operation submitted by mkfs.btrfs. Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250715115324.53308-5-johannes.thumshirn@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Johannes Thumshirn
|
4cc21a0076 |
block: add tracepoint for blk_zone_update_request_bio
Add a tracepoint in blk_zone_update_request_bio() to trace the bio sector update on ZONE APPEND completions. An example for this tracepoint is as follows: <idle>-0 [001] d.h1. 381.746444: blk_zone_update_request_bio: 259,5 ZAS 131072 () 1048832 + 256 none,0,0 [swapper/1] Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250715115324.53308-4-johannes.thumshirn@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Johannes Thumshirn
|
bd116214d5 |
blktrace: add zoned block commands to blk_fill_rwbs
Add zoned block commands to blk_fill_rwbs: - ZONE APPEND will be decoded as 'ZA' - ZONE RESET will be decoded as 'ZR' - ZONE RESET ALL will be decoded as 'ZRA' - ZONE FINISH will be decoded as 'ZF' - ZONE OPEN will be decoded as 'ZO' - ZONE CLOSE will be decoded as 'ZC' Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250715115324.53308-2-johannes.thumshirn@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jeff Layton
|
6f0e26243b |
sunrpc: remove SVC_SYSERR
Nothing returns this error code. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
f26c930530 |
sunrpc: new tracepoints around svc thread wakeups
Convert the svc_wake_up tracepoint into svc_pool_thread_event class. Have it also record the pool id, and add new tracepoints for when the thread is already running and for when there are no idle threads. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
David Howells
|
89635eae07 |
netfs: Fix race between cache write completion and ALL_QUEUED being set
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED.
Fixes:
|
||
|
Linus Torvalds
|
2eb7f03acf |
Merge tag 'vfs-6.16-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner: - Fix a regression caused by the anonymous inode rework. Making them regular files causes various places in the kernel to tip over starting with io_uring. Revert to the former status quo and port our assertion to be based on checking the inode so we don't lose the valuable VFS_*_ON_*() assertions that have already helped discover weird behavior our outright bugs. - Fix the the upper bound calculation in fuse_fill_write_pages() - Fix priority inversion issues in the eventpoll code - Make secretmen use anon_inode_make_secure_inode() to avoid bypassing the LSM layer - Fix a netfs hang due to missing case in final DIO read result collection - Fix a double put of the netfs_io_request struct - Provide some helpers to abstract out NETFS_RREQ_IN_PROGRESS flag wrangling - Fix infinite looping in netfs_wait_for_pause/request() - Fix a netfs ref leak on an extra subrequest inserted into a request's list of subreqs - Fix various cifs RPC callbacks to set NETFS_SREQ_NEED_RETRY if a subrequest fails retriably - Fix a cifs warning in the workqueue code when reconnecting a channel - Fix the updating of i_size in netfs to avoid a race between testing if we should have extended the file with a DIO write and changing i_size - Merge the places in netfs that update i_size on write - Fix coredump socket selftests * tag 'vfs-6.16-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: anon_inode: rework assertions netfs: Update tracepoints in a number of ways netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read netfs: Merge i_size update functions netfs: Fix i_size updating smb: client: set missing retry flag in cifs_writev_callback() smb: client: set missing retry flag in cifs_readv_callback() smb: client: set missing retry flag in smb2_writev_callback() netfs: Fix ref leak on inserted extra subreq in write retry netfs: Fix looping in wait functions netfs: Provide helpers to perform NETFS_RREQ_IN_PROGRESS flag wangling netfs: Fix double put of request netfs: Fix hang due to missing case in final DIO read result collection eventpoll: Fix priority inversion problem fuse: fix fuse_fill_write_pages() upper bound calculation fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass selftests/coredump: Fix "socket_detect_userspace_client" test failure |
||
|
Philip Radford
|
f8e656382b |
include: trace: Add tracepoint support for inflight xfer count
Enhance the existing SCMI transfer tracepoints by including the current in-flight transfer count in `scmi_xfer_begin` and `scmi_xfer_end`. Introduce a new helper `scmi_inflight_count()` to retrieve the active transfer count from the SCMI debug counters when debug is enabled. This trace data is useful for visualizing transfer activity over time and identifying congestion or unexpected behavior in SCMI messaging. Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Philip Radford <philip.radford@arm.com> Message-Id: <20250630105544.531723-4-philip.radford@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
||
|
David Howells
|
90b3ccf514 |
netfs: Update tracepoints in a number of ways
Make a number of updates to the netfs tracepoints:
(1) Remove a duplicate trace from netfs_unbuffered_write_iter_locked().
(2) Move the trace in netfs_wake_rreq_flag() to after the flag is cleared
so that the change appears in the trace.
(3) Differentiate the use of netfs_rreq_trace_wait/woke_queue symbols.
(4) Don't do so many trace emissions in the wait functions as some of them
are redundant.
(5) In netfs_collect_read_results(), differentiate a subreq that's being
abandoned vs one that has been consumed in a regular way.
(6) Add a tracepoint to indicate the call to ->ki_complete().
(7) Don't double-increment the subreq_counter when retrying a write.
(8) Move the netfs_sreq_trace_io_progress tracepoint within cifs code to
just MID_RESPONSE_RECEIVED and add different tracepoints for other MID
states and note check failure.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Link: https://lore.kernel.org/20250701163852.2171681-14-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
David Howells
|
4e32541076 |
netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read
Renumber the NETFS_RREQ_* flags to put the most useful status bits in the bottom nibble - and therefore the last hex digit in the trace output - making it easier to grasp the state at a glance. In particular, put the IN_PROGRESS flag in bit 0 and ALL_QUEUED at bit 1. Also make the flags field in /proc/fs/netfs/requests larger to accommodate all the flags. Also make the flags field in the netfs_sreq tracepoint larger to accommodate all the NETFS_SREQ_* flags. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250701163852.2171681-13-dhowells@redhat.com Reviewed-by: Paulo Alcantara <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
9df7b5ebea |
netfs: Fix double put of request
If a netfs request finishes during the pause loop, it will have the ref
that belongs to the IN_PROGRESS flag removed at that point - however, if it
then goes to the final wait loop, that will *also* put the ref because it
sees that the IN_PROGRESS flag is clear and incorrectly assumes that this
happened when it called the collector.
In fact, since IN_PROGRESS is clear, we shouldn't call the collector again
since it's done all the cleanup, such as calling ->ki_complete().
Fix this by making netfs_collect_in_app() just return, indicating that
we're done if IN_PROGRESS is removed.
Fixes:
|
||
|
Zhang Yi
|
f4265b8d32 |
ext4: add FALLOC_FL_WRITE_ZEROES support
Add support for FALLOC_FL_WRITE_ZEROES if the underlying device enable the unmap write zeroes operation. This first allocates blocks as unwritten, then issues a zero command outside of the running journal handle, and finally converts them to a written state. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/20250619111806.3546162-10-yi.zhang@huaweicloud.com Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Gao Xiang
|
30b5844480 |
erofs: remove unused trace event erofs_destroy_inode
The trace event `erofs_destroy_inode` was added but remains unused. This
unused event contributes approximately 5KB to the kernel module size.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/r/20250612224906.15000244@batman.local.home
Fixes:
|
||
|
Linus Torvalds
|
538c429a4b |
Merge tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing fixes from Steven Rostedt: - Fix regression of waiting a long time on updating trace event filters When the faultable trace points were added, it needed task trace RCU synchronization. This was added to the tracepoint_synchronize_unregister() function. The filter logic always called this function whenever it updated the trace event filters before freeing the old filters. This increased the time of "trace-cmd record" from taking 13 seconds to running over 2 minutes to complete. Move the freeing of the filters to call_rcu*() logic, which brings the time back down to 13 seconds. - Fix ring_buffer_subbuf_order_set() error path lock protection The error path of the ring_buffer_subbuf_order_set() released the mutex too early and allowed subsequent accesses to setting the subbuffer size to corrupt the data and cause a bug. By moving the mutex locking to the end of the error path, it prevents the reentrant access to the critical data and also allows the function to convert the taking of the mutex over to the guard() logic. - Remove unused power management clock events The clock events were added in 2010 for power management. In 2011 arm used them. In 2013 the code they were used in was removed. These events have been wasting memory since then. - Fix sparse warnings There was a few places that sparse warned about trace_events_filter.c where file->filter was referenced directly, but it is annotated with an __rcu tag. Use the helper functions and fix them up to use rcu_dereference() properly. * tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Add rcu annotation around file->filter accesses tracing: PM: Remove unused clock events ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set() tracing: Fix regression of filter waiting a long time on RCU synchronization |
||
|
Steven Rostedt
|
de6fdc076d |
tracing: PM: Remove unused clock events
The events clock_enable, clock_disable, and clock_set_rate were added back
in 2010. In 2011 they were used by the arm architecture but removed in
2013. These events add around 7K of memory which was wasted for the last 12
years.
Remove them.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kajetan Puchalski <kajetan.puchalski@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/20250605162106.1a459dad@gandalf.local.home
Fixes:
|
||
|
Linus Torvalds
|
5abc7438f1 |
Merge tag 'nfs-for-6.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS clent updates from Anna Schumaker:
"New Features:
- Implement the Sunrpc rfc2203 rpcsec_gss sequence number cache
- Add support for FALLOC_FL_ZERO_RANGE on NFS v4.2
- Add a localio sysfs attribute
Stable Fixes:
- Fix double-unlock bug in nfs_return_empty_folio()
- Don't check for OPEN feature support in v4.1
- Always probe for LOCALIO support asynchronously
- Prevent hang on NFS mounts with xprtsec=[m]tls
Other Bugfixes:
- xattr handlers should check for absent nfs filehandles
- Fix setattr caching of TIME_[MODIFY|ACCESS]_SET when timestamps are
delegated
- Fix listxattr to return selinux security labels
- Connect to NFSv3 DS using TLS if MDS connection uses TLS
- Clear SB_RDONLY before getting a superblock, and ignore when
remounting
- Fix incorrect handling of NFS error codes in nfs4_do_mkdir()
- Various nfs_localio fixes from Neil Brown that include fixing an
rcu compilation error found by older gcc versions.
- Update stats on flexfiles pNFS DSes when receiving NFS4ERR_DELAY
Cleanups:
- Add a refcount tracker for struct net in the nfs_client
- Allow FREE_STATEID to clean up delegations
- Always set NLINK even if the server doesn't support it
- Cleanups to the NFS folio writeback code
- Remove dead code from xs_tcp_tls_setup_socket()"
* tag 'nfs-for-6.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (30 commits)
flexfiles/pNFS: update stats on NFS4ERR_DELAY for v4.1 DSes
nfs_localio: change nfsd_file_put_local() to take a pointer to __rcu pointer
nfs_localio: protect race between nfs_uuid_put() and nfs_close_local_fh()
nfs_localio: duplicate nfs_close_local_fh()
nfs_localio: simplify interface to nfsd for getting nfsd_file
nfs_localio: always hold nfsd net ref with nfsd_file ref
nfs_localio: use cmpxchg() to install new nfs_file_localio
SUNRPC: Remove dead code from xs_tcp_tls_setup_socket()
SUNRPC: Prevent hang on NFS mount with xprtsec=[m]tls
nfs: fix incorrect handling of large-number NFS errors in nfs4_do_mkdir()
nfs: ignore SB_RDONLY when remounting nfs
nfs: clear SB_RDONLY before getting superblock
NFS: always probe for LOCALIO support asynchronously
pnfs/flexfiles: connect to NFSv3 DS using TLS if MDS connection uses TLS
NFS: add localio to sysfs
nfs: use writeback_iter directly
nfs: refactor nfs_do_writepage
nfs: don't return AOP_WRITEPAGE_ACTIVATE from nfs_do_writepage
nfs: fold nfs_page_async_flush into nfs_do_writepage
NFSv4: Always set NLINK even if the server doesn't support it
...
|
||
|
Linus Torvalds
|
70087d2200 |
Merge tag 'trace-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt: - Fix UAF in module unload in ftrace when there's a bug in the module If a module is buggy and triggers ftrace_disable which is set when an anomaly is detected, when it gets unloaded it doesn't free the hooks into kallsyms, and when a kallsyms lookup is performed it may access the mod->modname field and crash via UAF. Fix this by still freeing the mod_maps that are attached to kallsyms on module unload regardless if ftrace_disable is set or not. - Do not bother allocating mod_maps for kallsyms if ftrace_disable is set - Remove unused trace events When a trace event or tracepoint is created but not used, it still creates the code and data structures needed for that trace event. This just wastes memory. Remove the trace events that are created but not used. This does not remove trace events that are created but are not used due configs not being set. That will be handled later. This only removes events that have no user under any config. * tag 'trace-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fsdax: Remove unused trace events for dax insert mapping genirq/matrix: Remove unused irq_matrix_alloc_reserved tracepoint xdp: Remove unused mem_return_failed event ftrace: Don't allocate ftrace module map if ftrace is disabled ftrace: Fix UAF when lookup kallsym after ftrace disabled |
||
|
Steven Rostedt
|
a4a45a9a72 |
fsdax: Remove unused trace events for dax insert mapping
When the dax_fault_actor() helper was factored out, it removed the calls
to the dax_pmd_insert_mapping and dax_insert_mapping events but never
removed the events themselves. As each event created takes up memory
(roughly 5K each), this is a waste as it is never used.
Remove the unused dax_pmd_insert_mapping and dax_insert_mapping trace
events.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250529152211.688800c9@gandalf.local.home
Fixes:
|
||
|
Linus Torvalds
|
0fb34422b5 |
Merge tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner: - The main API document has been extensively updated/rewritten - Fix an oops in write-retry due to mis-resetting the I/O iterator - Fix the recording of transferred bytes for short DIO reads - Fix a request's work item to not require a reference, thereby avoiding the need to get rid of it in BH/IRQ context - Fix waiting and waking to be consistent about the waitqueue used - Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE, NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR, NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED - Reorder structs to eliminate holes - Remove netfs_io_request::ractl - Only provide proc_link field if CONFIG_PROC_FS=y - Remove folio_queue::marks3 - Fix undifferentiation of DIO reads from unbuffered reads * tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: netfs: Fix undifferentiation of DIO reads from unbuffered reads netfs: Fix wait/wake to be consistent about the waitqueue used netfs: Fix the request's work item to not require a ref netfs: Fix setting of transferred bytes with short DIO reads netfs: Fix oops in write-retry from mis-resetting the subreq iterator fs/netfs: remove unused flag NETFS_RREQ_BLOCKED fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS folio_queue: remove unused field `marks3` fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y fs/netfs: remove `netfs_io_request.ractl` fs/netfs: reorder struct fields to eliminate holes fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH fs/netfs: remove unused source NETFS_INVALID_WRITE fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ |
||
|
Steven Rostedt
|
167d7ede00 |
genirq/matrix: Remove unused irq_matrix_alloc_reserved tracepoint
The tracepoint irq_matrix_alloc_reserved was added but never used.
Remove it.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: Juergen Gross <jgross@suse.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250529135739.26e5c075@gandalf.local.home
Fixes:
|
||
|
Steven Rostedt
|
e27e43a5cb |
xdp: Remove unused mem_return_failed event
The change to allow page_pool to handle its own page destruction instead
of relying on XDP removed the trace_mem_return_failed() tracepoint caller,
but did not remove the mem_return_failed trace event. As trace events take
up memory when they are created regardless of if they are used or not,
having this unused event around wastes around 5K of memory.
Remove the unused event.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250529160550.1f888b15@gandalf.local.home
Fixes:
|
||
|
Linus Torvalds
|
00c010e130 |
Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - "Always call constructor for kernel page tables" from Kevin Brodsky ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables. This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - "vmscan: enforce mems_effective during demotion" from Gregory Price changes reclaim to respect cpuset.mems_effective during demotion when possible. because presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently. - "Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents. - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. * tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits) mm: pcp: increase pcp->free_count threshold to trigger free_high mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page mm/hugetlb: pass folio instead of page to unmap_ref_private() memcg: objcg stock trylock without irq disabling memcg: no stock lock for cpu hot-unplug memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs memcg: make count_memcg_events re-entrant safe against irqs memcg: make mod_memcg_state re-entrant safe against irqs memcg: move preempt disable to callers of memcg_rstat_updated memcg: memcg_rstat_updated re-entrant safe against irqs mm: khugepaged: decouple SHMEM and file folios' collapse selftests/eventfd: correct test name and improve messages alloc_tag: check mem_profiling_support in alloc_tag_init Docs/damon: update titles and brief introductions to explain DAMOS selftests/damon/_damon_sysfs: read tried regions directories in order mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject() mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat() mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs ... |
||
|
Linus Torvalds
|
d8441523f2 |
Merge tag 'f2fs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, Matthew converted most of page operations to using
folio. Beyond the work, we've applied some performance tunings such as
GC and linear lookup, in addition to enhancing fault injection and
sanity checks.
Enhancements:
- large number of folio conversions
- add a control to turn on/off the linear lookup for performance
- tune GC logics for zoned block device
- improve fault injection and sanity checks
Bug fixes:
- handle error cases of memory donation
- fix to correct check conditions in f2fs_cross_rename
- fix to skip f2fs_balance_fs() if checkpoint is disabled
- don't over-report free space or inodes in statvfs
- prevent the current section from being selected as a victim during GC
- fix to calculate first_zoned_segno correctly
- fix to avoid inconsistence between SIT and SSA for zoned block device
As usual, there are several debugging patches and clean-ups as well"
* tag 'f2fs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (195 commits)
f2fs: fix to correct check conditions in f2fs_cross_rename
f2fs: use d_inode(dentry) cleanup dentry->d_inode
f2fs: fix to skip f2fs_balance_fs() if checkpoint is disabled
f2fs: clean up to check bi_status w/ BLK_STS_OK
f2fs: introduce is_{meta,node}_folio
f2fs: add ckpt_valid_blocks to the section entry
f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.
f2fs: introduce FAULT_VMALLOC
f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx
f2fs: add f2fs_bug_on() in f2fs_quota_read()
f2fs: add f2fs_bug_on() to detect potential bug
f2fs: remove unused sbi argument from checksum functions
f2fs: fix 32-bits hexademical number in fault injection doc
f2fs: don't over-report free space or inodes in statvfs
f2fs: return bool from __write_node_folio
f2fs: simplify return value handling in f2fs_fsync_node_pages
f2fs: always unlock the page in f2fs_write_single_data_page
f2fs: remove wbc->for_reclaim handling
f2fs: return bool from __f2fs_write_meta_folio
f2fs: fix to return correct error number in f2fs_sync_node_pages()
...
|
||
|
Linus Torvalds
|
ae5ec8adb8 |
Merge tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull trusted security manager (TSM) updates from Dan Williams:
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to
publish TDX "Runtime Measurement Registers" ("RTMRs") that either
maintain a hash of stored values (similar to a TPM PCR) or provide
statically provisioned data. These measurements are validated by a
relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
* tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
tsm-mr: Fix init breakage after bin_attrs constification by scoping non-const pointers to init phase
sample/tsm-mr: Fix missing static for sample_report
virt: tdx-guest: Transition to scoped_cond_guard for mutex operations
virt: tdx-guest: Refactor and streamline TDREPORT generation
virt: tdx-guest: Expose TDX MRs as sysfs attributes
x86/tdx: tdx_mcall_get_report0: Return -EBUSY on TDCALL_OPERAND_BUSY error
x86/tdx: Add tdx_mcall_extend_rtmr() interface
tsm-mr: Add tsm-mr sample code
tsm-mr: Add TVM Measurement Register support
configfs-tsm-report: Fix NULL dereference of tsm_ops
coco/guest: Move shared guest CC infrastructure to drivers/virt/coco/guest/
configfs-tsm: Namespace TSM report symbols
|
||
|
Linus Torvalds
|
b78f1293f9 |
Merge tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt: - Have module addresses get updated in the persistent ring buffer The addresses of the modules from the previous boot are saved in the persistent ring buffer. If the same modules are loaded and an address is in the old buffer points to an address that was both saved in the persistent ring buffer and is loaded in memory, shift the address to point to the address that is loaded in memory in the trace event. - Print function names for irqs off and preempt off callsites When ignoring the print fmt of a trace event and just printing the fields directly, have the fields for preempt off and irqs off events still show the function name (via kallsyms) instead of just showing the raw address. - Clean ups of the histogram code The histogram functions saved over 800 bytes on the stack to process events as they come in. Instead, create per-cpu buffers that can hold this information and have a separate location for each context level (thread, softirq, IRQ and NMI). Also add some more comments to the code. - Add "common_comm" field for histograms Add "common_comm" that uses the current->comm as a field in an event histogram and acts like any of the other fields of the event. - Show "subops" in the enabled_functions file When the function graph infrastructure is used, a subsystem has a "subops" that it attaches its callback function to. Instead of the enabled_functions just showing a function calling the function that calls the subops functions, also show the subops functions that will get called for that function too. - Add "copy_trace_marker" option to instances There are cases where an instance is created for tooling to write into, but the old tooling has the top level instance hardcoded into the application. New tools want to consume the data from an instance and not the top level buffer. By adding a copy_trace_marker option, whenever the top instance trace_marker is written into, a copy of it is also written into the instance with this option set. This allows new tools to read what old tools are writing into the top buffer. If this option is cleared by the top instance, then what is written into the trace_marker is not written into the top instance. This is a way to redirect the trace_marker writes into another instance. - Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp() If a tracepoint is created by DECLARE_TRACE() instead of TRACE_EVENT(), then it will not be exposed via tracefs. Currently there's no way to differentiate in the kernel the tracepoint functions between those that are exposed via tracefs or not. A calling convention has been made manually to append a "_tp" prefix for events created by DECLARE_TRACE(). Instead of doing this manually, force it so that all DECLARE_TRACE() events have this notation. - Use __string() for task->comm in some sched events Instead of hardcoding the comm to be TASK_COMM_LEN in some of the scheduler events use __string() which makes it dynamic. Note, if these events are parsed by user space it they may break, and the event may have to be converted back to the hardcoded size. - Have function graph "depth" be unsigned to the user Internally to the kernel, the "depth" field of the function graph event is signed due to -1 being used for end of boundary. What actually gets recorded in the event itself is zero or positive. Reflect this to user space by showing "depth" as unsigned int and be consistent across all events. - Allow an arbitrary long CPU string to osnoise_cpus_write() The filtering of which CPUs to write to can exceed 256 bytes. If a machine has 256 CPUs, and the filter is to filter every other CPU, the write would take a string larger than 256 bytes. Instead of using a fixed size buffer on the stack that is 256 bytes, allocate it to handle what is passed in. - Stop having ftrace check the per-cpu data "disabled" flag The "disabled" flag in the data structure passed to most ftrace functions is checked to know if tracing has been disabled or not. This flag was added back in 2008 before the ring buffer had its own way to disable tracing. The "disable" flag is now not always set when needed, and the ring buffer flag should be used in all locations where the disabled is needed. Since the "disable" flag is redundant and incorrect, stop using it. Fix up some locations that use the "disable" flag to use the ring buffer info. - Use a new tracer_tracing_disable/enable() instead of data->disable flag There's a few cases that set the data->disable flag to stop tracing, but this flag is not consistently used. It is also an on/off switch where if a function set it and calls another function that sets it, the called function may incorrectly enable it. Use a new trace_tracing_disable() and tracer_tracing_enable() that uses a counter and can be nested. These use the ring buffer flags which are always checked making the disabling more consistent. - Save the trace clock in the persistent ring buffer Save what clock was used for tracing in the persistent ring buffer and set it back to that clock after a reboot. - Remove unused reference to a per CPU data pointer in mmiotrace functions - Remove unused buffer_page field from trace_array_cpu structure - Remove more strncpy() instances - Other minor clean ups and fixes * tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits) tracing: Fix compilation warning on arm32 tracing: Record trace_clock and recover when reboot tracing/sched: Use __string() instead of fixed lengths for task->comm tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix tracing: Cleanup upper_empty() in pid_list tracing: Allow the top level trace_marker to write into another instances tracing: Add a helper function to handle the dereference arg in verifier tracing: Remove unnecessary "goto out" that simply returns ret is trigger code tracing: Fix error handling in event_trigger_parse() tracing: Rename event_trigger_alloc() to trigger_data_alloc() tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf tracing: Remove unused buffer_page field from trace_array_cpu structure tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer tracing: Convert the per CPU "disabled" counter to local from atomic tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field ring-buffer: Add ring_buffer_record_is_on_cpu() tracing: Do not use per CPU array_buffer.data->disabled for cpumask ftrace: Do not disabled function graph based on "disabled" field tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one() ... |
||
|
Linus Torvalds
|
1b98f357da |
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
||
|
Linus Torvalds
|
2c26b68cd5 |
Merge tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever: "The marquee feature for this release is that the limit on the maximum rsize and wsize has been raised to 4MB. The default remains at 1MB, but risk-seeking administrators now have the ability to try larger I/O sizes with NFS clients that support them. Eventually the default setting will be increased when we have confidence that this change will not have negative impact. With v6.16, NFSD now has its own debugfs file system where we can add experimental features and make them available outside of our development community without impacting production deployments. The first experimental setting added is one that makes all NFS READ operations use vfs_iter_read() instead of the NFSD splice actor. The plan is to eventually retire the splice actor, as that will enable a number of new capabilities such as the use of struct bio_vec from the top to the bottom of the NFSD stack. Jeff Layton contributed a number of observability improvements. The use of dprintk() in a number of high-traffic code paths has been replaced with static trace points. This release sees the continuation of efforts to harden the NFSv4.2 COPY operation. Soon, the restriction on async COPY operations can be lifted. Many thanks to the contributors, reviewers, testers, and bug reporters who participated during the v6.16 development cycle" * tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits) xdrgen: Fix code generated for counted arrays SUNRPC: Bump the maximum payload size for the server NFSD: Add a "default" block size NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro NFSD: Remove NFSD_BUFSIZE sunrpc: Remove the RPCSVC_MAXPAGES macro svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages sunrpc: Adjust size of socket's receive page array dynamically SUNRPC: Remove svc_rqst :: rq_vec SUNRPC: Remove svc_fill_write_vector() NFSD: Use rqstp->rq_bvec in nfsd_iter_write() SUNRPC: Export xdr_buf_to_bvec() NFSD: De-duplicate the svc_fill_write_vector() call sites NFSD: Use rqstp->rq_bvec in nfsd_iter_read() sunrpc: Replace the rq_bvec array with dynamically-allocated memory sunrpc: Replace the rq_pages array with dynamically-allocated memory sunrpc: Remove backchannel check in svc_init_buffer() sunrpc: Add a helper to derive maxpages from sv_max_mesg svcrdma: Reduce the number of rdma_rw contexts per-QP ... |
||
|
Linus Torvalds
|
3b66e6b3c0 |
Merge tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - cgroup rstat shared the tracking tree across all controllers with the rationale being that a cgroup which is using one resource is likely to be using other resources at the same time (ie. if something is allocating memory, it's probably consuming CPU cycles). However, this turned out to not scale very well especially with memcg using rstat for internal operations which made memcg stat read and flush patterns substantially different from other controllers. JP Kobryn split the rstat tree per controller. - cgroup BPF support was hooking into cgroup init/exit paths directly. Convert them to use a notifier chain instead so that other usages can be added easily. The two of the patches which implement this are mislabeled as belonging to sched_ext instead of cgroup. Sorry. - Relatively minor cpuset updates - Documentation updates * tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits) sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier sched_ext: Introduce cgroup_lifetime_notifier cgroup: Minor reorganization of cgroup_create() cgroup, docs: cpu controller's interaction with various scheduling policies cgroup, docs: convert space indentation to tab indentation cgroup: avoid per-cpu allocation of size zero rstat cpu locks cgroup, docs: be specific about bandwidth control of rt processes cgroup: document the rstat per-cpu initialization cgroup: helper for checking rstat participation of css cgroup: use subsystem-specific rstat locks to avoid contention cgroup: use separate rstat trees for each subsystem cgroup: compare css to cgroup::self in helper for distingushing css cgroup: warn on rstat usage by early init subsystems cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask() cgroup/rstat: Improve cgroup_rstat_push_children() documentation cgroup: fix goto ordering in cgroup_init() cgroup: fix pointer check in css_rstat_init() cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs cgroup/cpuset: Fix obsolete comment in cpuset_css_offline() cgroup/cpuset: Always use cpu_active_mask ... |
||
|
Linus Torvalds
|
0aee061726 |
Merge tag 'x86-debug-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug updates from Ingo Molnar: "Move the x86 page fault tracepoints to generic code, because other architectures would like to make use of them as well" * tag 'x86-debug-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tracing, x86/mm: Move page fault tracepoints to generic x86/tracing, x86/mm: Remove redundant trace_pagefault_key |
||
|
Linus Torvalds
|
eaed94d1f6 |
Merge tag 'sched-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Tweak wait_task_inactive() to force dequeue sched_delayed tasks
(John Stultz)
- Adhere to place_entity() constraints (Peter Zijlstra)
- Allow decaying util_est when util_avg > CPU capacity (Pierre
Gondois)
- Fix up wake_up_sync() vs DELAYED_DEQUEUE (Xuewen Yan)
Energy management:
- Introduce sched_update_asym_prefer_cpu() (K Prateek Nayak)
- cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings
change (K Prateek Nayak)
- Align uclamp and util_est and call before freq update (Xuewen Yan)
CPU isolation:
- Make use of more than one housekeeping CPU (Phil Auld)
RT scheduler:
- Fix race in push_rt_task() (Harshit Agarwal)
- Add kernel cmdline option for rt_group_sched (Michal Koutný)
Scheduler topology support:
- Improve topology_span_sane speed (Steve Wahl)
Scheduler debugging:
- Move and extend the sched_process_exit() tracepoint (Andrii
Nakryiko)
- Add RT_GROUP WARN checks for non-root task_groups (Michal Koutný)
- Fix trace_sched_switch(.prev_state) (Peter Zijlstra)
- Untangle cond_resched() and live-patching (Peter Zijlstra)
Fixes and cleanups:
- Misc fixes and cleanups (K Prateek Nayak, Michal Koutný, Peter
Zijlstra, Xuewen Yan)"
* tag 'sched-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
sched/uclamp: Align uclamp and util_est and call before freq update
sched/util_est: Simplify condition for util_est_{en,de}queue()
sched/fair: Fixup wake_up_sync() vs DELAYED_DEQUEUE
sched,livepatch: Untangle cond_resched() and live-patching
sched/core: Tweak wait_task_inactive() to force dequeue sched_delayed tasks
sched/fair: Adhere to place_entity() constraints
sched/debug: Print the local group's asym_prefer_cpu
cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings change
sched/topology: Introduce sched_update_asym_prefer_cpu()
sched/fair: Use READ_ONCE() to read sg->asym_prefer_cpu
sched/isolation: Make use of more than one housekeeping cpu
sched/rt: Fix race in push_rt_task
sched: Add annotations to RT_GROUP_SCHED fields
sched: Add RT_GROUP WARN checks for non-root task_groups
sched: Do not construct nor expose RT_GROUP_SCHED structures if disabled
sched: Bypass bandwitdh checks with runtime disabled RT_GROUP_SCHED
sched: Skip non-root task_groups with disabled RT_GROUP_SCHED
sched: Add commadline option for RT_GROUP_SCHED toggling
sched: Always initialize rt_rq's task_group
sched: Remove unneeed macro wrap
...
|
||
|
Linus Torvalds
|
79b98edf91 |
Merge tag 'erofs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, Intel QAT hardware accelerators are supported to
improve DEFLATE decompression performance. I've tested it with the
enwik9 dataset of 1 MiB pclusters on our Intel Sapphire Rapids
bare-metal server and a PL0 ESSD, and the sequential read performance
even surpasses LZ4 software decompression on this setup.
In addition, a `fsoffset` mount option is introduced for file-backed
mounts to specify the filesystem offset in order to adapt customized
container formats.
And other improvements and minor cleanups. Summary:
- Add a `fsoffset` mount option to specify the filesystem offset
- Support Intel QAT accelerators to boost up the DEFLATE algorithm
- Initialize per-CPU workers and CPU hotplug hooks lazily to avoid
unnecessary overhead when EROFS is not mounted
- Fix file handle encoding for 64-bit NIDs
- Minor cleanups"
* tag 'erofs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: support DEFLATE decompression by using Intel QAT
erofs: clean up erofs_{init,exit}_sysfs()
erofs: add 'fsoffset' mount option to specify filesystem offset
erofs: lazily initialize per-CPU workers and CPU hotplug hooks
erofs: refine readahead tracepoint
erofs: avoid using multiple devices with different type
erofs: fix file handle encoding for 64-bit NIDs
|
||
|
Linus Torvalds
|
5e82ed5ca4 |
Merge tag 'for-6.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Apart from numerous cleanups, there are some performance improvements
and one minor mount option update. There's one more radix-tree
conversion (one remaining), and continued work towards enabling large
folios (almost finished).
Performance:
- extent buffer conversion to xarray gains throughput and runtime
improvements on metadata heavy operations doing writeback (sample
test shows +50% throughput, -33% runtime)
- extent io tree cleanups lead to performance improvements by
avoiding unnecessary searches or repeated searches
- more efficient extent unpinning when committing transaction
(estimated run time improvement 3-5%)
User visible changes:
- remove standalone mount option 'nologreplay', deprecated in 5.9,
replacement is 'rescue=nologreplay'
- in scrub, update reporting, add back device stats message after
detected errors (accidentally removed during recent refactoring)
Core:
- convert extent buffer radix tree to xarray
- in subpage mode, move block perfect compression out of experimental
build
- in zoned mode, introduce sub block groups to allow managing special
block groups, like the one for relocation or tree-log, to handle
some corner cases of ENOSPC
- in scrub, simplify bitmaps for block tracking status
- continued preparations for large folios:
- remove assertions for folio order 0
- add support where missing: compression, buffered write, defrag,
hole punching, subpage, send
- fix fsync of files with no hard links not persisting deletion
- reject tree blocks which are not nodesize aligned, a precaution
from 4.9 times
- move transaction abort calls closer to the error sites
- remove usage of some struct bio_vec internals
- simplifications in extent map
- extent IO cleanups and optimizations
- error handling improvements
- enhanced ASSERT() macro with optional format strings
- cleanups:
- remove unused code
- naming unifications, dropped __, added prefix
- merge similar functions
- use common helpers for various data structures"
* tag 'for-6.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (198 commits)
btrfs: move misplaced comment of btrfs_path::keep_locks
btrfs: remove standalone "nologreplay" mount option
btrfs: use a single variable to track return value at btrfs_page_mkwrite()
btrfs: don't return VM_FAULT_SIGBUS on failure to set delalloc for mmap write
btrfs: simplify early error checking in btrfs_page_mkwrite()
btrfs: pass true to btrfs_delalloc_release_space() at btrfs_page_mkwrite()
btrfs: fix wrong start offset for delalloc space release during mmap write
btrfs: fix harmless race getting delayed ref head count when running delayed refs
btrfs: log error codes during failures when writing super blocks
btrfs: simplify error return logic when getting folio at prepare_one_folio()
btrfs: return real error from __filemap_get_folio() calls
btrfs: remove superfluous return value check at btrfs_dio_iomap_begin()
btrfs: fix invalid data space release when truncating block in NOCOW mode
btrfs: update Kconfig option descriptions
btrfs: update list of features built under experimental config
btrfs: send: remove btrfs_debug() calls
btrfs: use boolean for delalloc argument to btrfs_free_reserved_extent()
btrfs: use boolean for delalloc argument to btrfs_free_reserved_bytes()
btrfs: fold error checks when allocating ordered extent and update comments
btrfs: check we grabbed inode reference when allocating an ordered extent
...
|
||
|
Linus Torvalds
|
49fffac983 |
Merge tag 'for-6.16/io_uring-20250523' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe: - Avoid indirect function calls in io-wq for executing and freeing work. The design of io-wq is such that it can be a generic mechanism, but as it's just used by io_uring now, may as well avoid these indirect calls - Clean up registered buffers for networking - Add support for IORING_OP_PIPE. Pretty straight forward, allows creating pipes with io_uring, particularly useful for having these be instantiated as direct descriptors - Clean up the coalescing support fore registered buffers - Add support for multiple interface queues for zero-copy rx networking. As this feature was merged for 6.15 it supported just a single ifq per ring - Clean up the eventfd support - Add dma-buf support to zero-copy rx - Clean up and improving the request draining support - Clean up provided buffer support, most notably with an eye toward making the legacy support less intrusive - Minor fdinfo cleanups, dropping support for dumping what credentials are registered - Improve support for overflow CQE handling, getting rid of GFP_ATOMIC for allocating overflow entries where possible - Improve detection of cases where io-wq doesn't need to spawn a new worker unnecessarily - Various little cleanups * tag 'for-6.16/io_uring-20250523' of git://git.kernel.dk/linux: (59 commits) io_uring/cmd: warn on reg buf imports by ineligible cmds io_uring/io-wq: only create a new worker if it can make progress io_uring/io-wq: ignore non-busy worker going to sleep io_uring/io-wq: move hash helpers to the top trace/io_uring: fix io_uring_local_work_run ctx documentation io_uring: finish IOU_OK -> IOU_COMPLETE transition io_uring: add new helpers for posting overflows io_uring: pass in struct io_big_cqe to io_alloc_ocqe() io_uring: make io_alloc_ocqe() take a struct io_cqe pointer io_uring: split alloc and add of overflow io_uring: open code io_req_cqe_overflow() io_uring/fdinfo: get rid of dumping credentials io_uring/fdinfo: only compile if CONFIG_PROC_FS is set io_uring/kbuf: unify legacy buf provision and removal io_uring/kbuf: refactor __io_remove_buffers io_uring/kbuf: don't compute size twice on prep io_uring/kbuf: drop extra vars in io_register_pbuf_ring io_uring/kbuf: use mem_is_zero() io_uring/kbuf: account ring io_buffer_list memory io_uring: drain based on allocates reqs ... |
||
|
Linus Torvalds
|
6f59de9bc0 |
Merge tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
|
||
|
Ritesh Harjani (IBM)
|
927244f6ef |
traceevent/block: Add REQ_ATOMIC flag to block trace events
Filesystems like XFS can implement atomic write I/O using either REQ_ATOMIC flag set in the bio or via CoW operation. It will be useful if we have a flag in trace events to distinguish between the two. This patch adds char 'U' (Untorn writes) to rwbs field of the trace events if REQ_ATOMIC flag is set in the bio. <W/ REQ_ATOMIC> ================= xfs_io-4238 [009] ..... 4148.126843: block_rq_issue: 259,0 WFSU 16384 () 768 + 32 none,0,0 [xfs_io] <idle>-0 [009] d.h1. 4148.129864: block_rq_complete: 259,0 WFSU () 768 + 32 none,0,0 [0] <W/O REQ_ATOMIC> =============== xfs_io-4237 [010] ..... 4143.325616: block_rq_issue: 259,0 WS 16384 () 768 + 32 none,0,0 [xfs_io] <idle>-0 [010] d.H1. 4143.329138: block_rq_complete: 259,0 WS () 768 + 32 none,0,0 [0] Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://lore.kernel.org/r/44317cb2ec4588f6a2c1501a96684e6a1196e8ba.1747921498.git.ritesh.list@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
David Howells
|
db26d62d79 |
netfs: Fix undifferentiation of DIO reads from unbuffered reads
On cifs, "DIO reads" (specified by O_DIRECT) need to be differentiated from
"unbuffered reads" (specified by cache=none in the mount parameters). The
difference is flagged in the protocol and the server may behave
differently: Windows Server will, for example, mandate that DIO reads are
block aligned.
Fix this by adding a NETFS_UNBUFFERED_READ to differentiate this from
NETFS_DIO_READ, parallelling the write differentiation that already exists.
cifs will then do the right thing.
Fixes:
|
||
|
David Hildenbrand
|
cba4dbeb7b |
mm: remove VM_PAT
It's unused, so let's remove it. Link: https://lkml.kernel.org/r/20250512123424.637989-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> [x86 bits] Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Airlie <airlied@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jann Horn <jannh@google.com> Cc: Jonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Caleb Sander Mateos
|
28be240c76 |
trace/io_uring: fix io_uring_local_work_run ctx documentation
The comment for the tracepoint io_uring_local_work_run refers to a field "tctx" and a type "io_uring_ctx", neither of which exist. "tctx" looks to mean "ctx" and "io_uring_ctx" should be "io_ring_ctx". Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Link: https://lore.kernel.org/r/20250522150451.2385652-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |