mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-02-21 17:38:41 -05:00
0193eebbb1fcade01331f9d7cc24e57fc28a577d
18040 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Yuyang Huang
|
2c2b61d213 |
netlink: add IGMP/MLD join/leave notifications
This change introduces netlink notifications for multicast address changes. The following features are included: * Addition and deletion of multicast addresses are reported using RTM_NEWMULTICAST and RTM_DELMULTICAST messages with AF_INET and AF_INET6. * Two new notification groups: RTNLGRP_IPV4_MCADDR and RTNLGRP_IPV6_MCADDR are introduced for receiving these events. This change allows user space applications (e.g., ip monitor) to efficiently track multicast group memberships by listening for netlink events. Previously, applications relied on inefficient polling of procfs, introducing delays. With netlink notifications, applications receive realtime updates on multicast group membership changes, enabling more precise metrics collection and system monitoring. This change also unlocks the potential for implementing a wide range of sophisticated multicast related features in user space by allowing applications to combine kernel provided multicast address information with user space data and communicate decisions back to the kernel for more fine grained control. This mechanism can be used for various purposes, including multicast filtering, IGMP/MLD offload, and IGMP/MLD snooping. Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Co-developed-by: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com> Link: https://lore.kernel.org/r/20180906091056.21109-1-pruddy@vyatta.att-mail.com Signed-off-by: Yuyang Huang <yuyanghuang@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Mina Almasry
|
7dba339faa |
page_pool: disable sync for cpu for dmabuf memory provider
dmabuf dma-addresses should not be dma_sync'd for CPU/device. Typically its the driver responsibility to dma_sync for CPU, but the driver should not dma_sync for CPU if the netmem is actually coming from a dmabuf memory provider. The page_pool already exposes a helper for dma_sync_for_cpu: page_pool_dma_sync_for_cpu. Upgrade this existing helper to handle netmem, and have it skip dma_sync if the memory is from a dmabuf memory provider. Drivers should migrate to using this helper when adding support for netmem. Also minimize the impact on the dma syncing performance for pages. Special case the dma-sync path for pages to not go through the overhead checks for dma-syncing and conversion to netmem. Cc: Alexander Lobakin <aleksander.lobakin@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20241211212033.1684197-5-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Mina Almasry
|
8156c31049 |
net: page_pool: create page_pool_alloc_netmem
Create page_pool_alloc_netmem to be the mirror of page_pool_alloc. This enables drivers that want currently use page_pool_alloc to transition to netmem by converting the call sites to page_pool_alloc_netmem. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241211212033.1684197-3-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Mina Almasry
|
91a152cbb4 |
net: page_pool: rename page_pool_alloc_netmem to *_netmems
page_pool_alloc_netmem (without an s) was the mirror of page_pool_alloc_pages (with an s), which was confusing. Rename to page_pool_alloc_netmems so it's the mirror of page_pool_alloc_pages. Signed-off-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241211212033.1684197-2-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Lobakin
|
207ff83cec |
xdp: make __xdp_return() MP-agnostic
Currently, __xdp_return() takes pointer to the virtual memory to free
a buffer. Apart from that this sometimes provokes redundant
data <--> page conversions, taking data pointer effectively prevents
lots of XDP code to support non-page-backed buffers, as there's no
mapping for the non-host memory (data is always NULL).
Just convert it to always take netmem reference. For
xdp_return_{buff,frame*}(), this chops off one page_address() per each
frag and adds one virt_to_netmem() (same as virt_to_page()) per header
buffer. For __xdp_return() itself, it removes one virt_to_page() for
MEM_TYPE_PAGE_POOL and another one for MEM_TYPE_PAGE_ORDER0, adding
one page_address() for [not really common nowadays]
MEM_TYPE_PAGE_SHARED, but the main effect is that the abovementioned
functions won't die or memleak anymore if the frame has non-host memory
attached and will correctly free those.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20241211172649.761483-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Alexander Lobakin
|
56d95b0adf |
xdp: get rid of xdp_frame::mem.id
Initially, xdp_frame::mem.id was used to search for the corresponding &page_pool to return the page correctly. However, after that struct page was extended to have a direct pointer to its PP (netmem has it as well), further keeping of this field makes no sense. xdp_return_frame_bulk() still used it to do a lookup, and this leftover is now removed. Remove xdp_frame::mem and replace it with ::mem_type, as only memory type still matters and we need to know it to be able to free the frame correctly. As a cute side effect, we can now make every scalar field in &xdp_frame of 4 byte width, speeding up accesses to them. Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241211172649.761483-3-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Lobakin
|
fcc680a647 |
page_pool: allow mixing PPs within one bulk
The main reason for this change was to allow mixing pages from different &page_pools within one &xdp_buff/&xdp_frame. Why not? With stuff like devmem and io_uring zerocopy Rx, it's required to have separate PPs for header buffers and payload buffers. Adjust xdp_return_frame_bulk() and page_pool_put_netmem_bulk(), so that they won't be tied to a particular pool. Let the latter create a separate bulk of pages which's PP is different from the first netmem of the bulk and process it after the main loop. This greatly optimizes xdp_return_frame_bulk(): no more hashtable lookups and forced flushes on PP mismatch. Also make xdp_flush_frame_bulk() inline, as it's just one if + function call + one u32 read, not worth extending the call ladder. Co-developed-by: Toke Høiland-Jørgensen <toke@redhat.com> # iterative Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> # while (count) Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241211172649.761483-2-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Toke Høiland-Jørgensen
|
a42d71e322 |
net_sched: sch_cake: Add drop reasons
Add three qdisc-specific drop reasons and use them in sch_cake:
1) SKB_DROP_REASON_QDISC_OVERLIMIT
Whenever the total queue limit for a qdisc instance is exceeded
and a packet is dropped to make room.
2) SKB_DROP_REASON_QDISC_CONGESTED
Whenever a packet is dropped by the qdisc AQM algorithm because
congestion is detected.
3) SKB_DROP_REASON_CAKE_FLOOD
Whenever a packet is dropped by the flood protection part of the
CAKE AQM algorithm (BLUE).
Also use the existing SKB_DROP_REASON_QUEUE_PURGE in cake_clear_tin().
Reasons show up as:
perf record -a -e skb:kfree_skb sleep 1; perf script
iperf3 665 [005] 848.656964: skb:kfree_skb: skbaddr=0xffff98168a333500 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x10f0 reason: QDISC_OVERLIMIT
swapper 0 [001] 909.166055: skb:kfree_skb: skbaddr=0xffff98168280cee0 rx_sk=(nil) protocol=34525 location=cake_dequeue+0x5ef reason: QDISC_CONGESTED
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241211-cake-drop-reason-v2-1-920afadf4d1b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
5098462fba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.13-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
ad913dfd8b |
Merge tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - SCO: Fix transparent voice setting - ISO: Locking fixes - hci_core: Fix sleeping function called from invalid context - hci_event: Fix using rcu_read_(un)lock while iterating - btmtk: avoid UAF in btmtk_process_coredump * tag 'for-net-2024-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btmtk: avoid UAF in btmtk_process_coredump Bluetooth: iso: Fix circular lock in iso_conn_big_sync Bluetooth: iso: Fix circular lock in iso_listen_bis Bluetooth: SCO: Add support for 16 bits transparent voice setting Bluetooth: iso: Fix recursive locking warning Bluetooth: iso: Always release hdev at the end of iso_listen_bis Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating Bluetooth: hci_core: Fix sleeping function called from invalid context Bluetooth: Improve setsockopt() handling of malformed user input ==================== Link: https://patch.msgid.link/20241212142806.2046274-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Frédéric Danis
|
29a651451e |
Bluetooth: SCO: Add support for 16 bits transparent voice setting
The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().
The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.
The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.
Fixes:
|
||
|
Luiz Augusto von Dentz
|
4d94f05558 |
Bluetooth: hci_core: Fix sleeping function called from invalid context
This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs like the bellow: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 4 locks held by kworker/u9:2/5070: #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335 #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335 #2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914 #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915 CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 __might_resched+0x5d4/0x780 kernel/sched/core.c:10187 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752 hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline] hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939 hci_event_func net/bluetooth/hci_event.c:7514 [inline] hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569 hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> Reported-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com Tested-by: syzbot+2fb0835e0c9cefc34614@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> |
||
|
Paolo Abeni
|
3d64c3d3c6 |
Merge tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix bogus test reports in rpath.sh selftest by adding permanent neighbor entries, from Phil Sutter. 2) Lockdep reports possible ABBA deadlock in xt_IDLETIMER, fix it by removing sysfs out of the mutex section, also from Phil Sutter. 3) It is illegal to release basechain via RCU callback, for several reasons. Keep it simple and safe by calling synchronize_rcu() instead. This is a partially reverting a botched recent attempt of me to fix this basechain release path on netdevice removal. From Florian Westphal. netfilter pull request 24-12-11 * tag 'nf-24-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: do not defer rule destruction via call_rcu netfilter: IDLETIMER: Fix for possible ABBA deadlock selftests: netfilter: Stabilize rpath.sh ==================== Link: https://patch.msgid.link/20241211230130.176937-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Russell King (Oracle)
|
99379f5872 |
net: dsa: provide implementation of .support_eee()
Provide a trivial implementation for the .support_eee() method which switch drivers can use to simply indicate that they support EEE on all their user ports. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/E1tL149-006cZJ-JJ@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Russell King (Oracle)
|
9723a77318 |
net: dsa: add hook to determine whether EEE is supported
Add a hook to determine whether the switch supports EEE. This will return false if the switch does not, or true if it does. If the method is not implemented, we assume (currently) that the switch supports EEE. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/E1tL144-006cZD-El@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Sitnicki
|
ca6a6f9386 |
tcp: Add sysctl to configure TIME-WAIT reuse delay
Today we have a hardcoded delay of 1 sec before a TIME-WAIT socket can be reused by reopening a connection. This is a safe choice based on an assumption that the other TCP timestamp clock frequency, which is unknown to us, may be as low as 1 Hz (RFC 7323, section 5.4). However, this means that in the presence of short lived connections with an RTT of couple of milliseconds, the time during which a 4-tuple is blocked from reuse can be orders of magnitude longer that the connection lifetime. Combined with a reduced pool of ephemeral ports, when using IP_LOCAL_PORT_RANGE to share an egress IP address between hosts [1], the long TIME-WAIT reuse delay can lead to port exhaustion, where all available 4-tuples are tied up in TIME-WAIT state. Turn the reuse delay into a per-netns setting so that sysadmins can make more aggressive assumptions about remote TCP timestamp clock frequency and shorten the delay in order to allow connections to reincarnate faster. Note that applications can completely bypass the TIME-WAIT delay protection already today by locking the local port with bind() before connecting. Such immediate connection reuse may result in PAWS failing to detect old duplicate segments, leaving us with just the sequence number check as a safety net. This new configurable offers a trade off where the sysadmin can balance between the risk of PAWS detection failing to act versus exhausting ports by having sockets tied up in TIME-WAIT state for too long. [1] https://lpc.events/event/16/contributions/1349/ Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-2-66aca0eed03e@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Sitnicki
|
19ce8cd304 |
tcp: Measure TIME-WAIT reuse delay with millisecond precision
Prepare ground for TIME-WAIT socket reuse with subsecond delay. Today the last TS.Recent update timestamp, recorded in seconds and stored tp->ts_recent_stamp and tw->tw_ts_recent_stamp fields, has two purposes. Firstly, it is used to track the age of the last recorded TS.Recent value to detect when that value becomes outdated due to potential wrap-around of the other TCP timestamp clock (RFC 7323, section 5.5). For this purpose a second-based timestamp is completely sufficient as even in the worst case scenario of a peer using a high resolution microsecond timestamp, the wrap-around interval is ~36 minutes long. Secondly, it serves as a threshold value for allowing TIME-WAIT socket reuse. A TIME-WAIT socket can be reused only once the virtual 1 Hz clock, ktime_get_seconds, is past the TS.Recent update timestamp. The purpose behind delaying the TIME-WAIT socket reuse is to wait for the other TCP timestamp clock to tick at least once before reusing the connection. It is only then that the PAWS mechanism for the reopened connection can detect old duplicate segments from the previous connection incarnation (RFC 7323, appendix B.2). In this case using a timestamp with second resolution not only blocks the way toward allowing faster TIME-WAIT reuse after shorter subsecond delay, but also makes it impossible to reliably delay TW reuse by one second. As Eric Dumazet has pointed out [1], due to timestamp rounding, the TW reuse delay will actually be between (0, 1] seconds, and 0.5 seconds on average. We delay TW reuse for one full second only when last TS.Recent update coincides with our virtual 1 Hz clock tick. Considering the above, introduce a dedicated field to store a millisecond timestamp of transition into the TIME-WAIT state. Place it in an existing 4-byte hole inside inet_timewait_sock structure to avoid an additional memory cost. Use the new timestamp to (i) reliably delay TIME-WAIT reuse by one second, and (ii) prepare for configurable subsecond reuse delay in the subsequent change. We assume here that a full one second delay was the original intention in [2] because it accounts for the worst case scenario of the other TCP using the slowest recommended 1 Hz timestamp clock. A more involved alternative would be to change the resolution of the last TS.Recent update timestamp, tw->tw_ts_recent_stamp, to milliseconds. [1] https://lore.kernel.org/netdev/CANn89iKB4GFd8sVzCbRttqw_96o3i2wDhX-3DraQtsceNGYwug@mail.gmail.com/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b8439924316d5bcb266d165b93d632a4b4b859af Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://patch.msgid.link/20241209-jakub-krn-909-poc-msec-tw-tstamp-v2-1-66aca0eed03e@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Florian Westphal
|
b04df3da1b |
netfilter: nf_tables: do not defer rule destruction via call_rcu
nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:
WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work
RIP: 0010:nft_set_destroy+0x3fe/0x5c0
Call Trace:
<TASK>
nf_tables_trans_destroy_work+0x6b7/0xad0
process_one_work+0x64a/0xce0
worker_thread+0x613/0x10d0
In case the synchronize_rcu becomes an issue, we can explore alternatives.
One way would be to allocate nft_trans_rule objects + one nft_trans_chain
object, deactivate the rules + the chain and then defer the freeing to the
nft destroy workqueue. We'd still need to keep the synchronize_rcu path as
a fallback to handle -ENOMEM corner cases though.
Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/
Fixes:
|
||
|
Michal Luczaj
|
3e643e4efa |
Bluetooth: Improve setsockopt() handling of malformed user input
The bt_copy_from_sockptr() return value is being misinterpreted by most users: a non-zero result is mistakenly assumed to represent an error code, but actually indicates the number of bytes that could not be copied. Remove bt_copy_from_sockptr() and adapt callers to use copy_safe_from_sockptr(). For sco_sock_setsockopt() (case BT_CODEC) use copy_struct_from_sockptr() to scrub parts of uninitialized buffer. Opportunistically, rename `len` to `optlen` in hci_sock_setsockopt_old() and hci_sock_setsockopt(). Fixes: |
||
|
Jakub Kicinski
|
d02af27fa2 |
Merge tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says: ==================== A small set of fixes: - avoid CSA warnings during link removal (by changing link bitmap after remove) - fix # of spatial streams initialisation - fix queues getting stuck in some CSA cases and resume failures - fix interface address when switching monitor mode - fix MBSS change flags 32-bit stack corruption - more UBSAN __counted_by "fixes" ... - fix link ID netlink validation * tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: sme: init n_channels before channels[] access wifi: mac80211: fix station NSS capability initialization order wifi: mac80211: fix vif addr when switching from monitor to station wifi: mac80211: fix a queue stall in certain cases of CSA wifi: mac80211: wake the queues in case of failure in resume wifi: cfg80211: clear link ID from bitmap during link delete after clean up wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon wifi: mac80211: fix mbss changed flags corruption on 32 bit systems wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one ==================== Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Petr Machata
|
e4f8647767 |
vxlan: Track reserved bits explicitly as part of the configuration
In order to make it possible to configure which bits in VXLAN header should be considered reserved, introduce a new field vxlan_config::reserved_bits. Have it cover the whole header, except for the VNI-present bit and the bits for VNI itself, and have individual enabled features clear more bits off reserved_bits. (This is expressed as first constructing a used_bits set, and then inverting it to get the reserved_bits. The set of used_bits will be useful on its own for validation of user-set reserved_bits in a following patch.) The patch also moves a comment relevant to the validation from the unparsed validation site up to the new site. Logically this patch should add the new comment, and a later patch that removes the unparsed bits would remove the old comment. But keeping both legs in the same patch is better from the history spelunking point of view. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/984dbf98d5940d3900268dbffaf70961f731d4a4.1733412063.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
3f330db306 |
net: reformat kdoc return statements
kernel-doc -Wall warns about missing Return: statement for non-void functions. We have a number of kdocs in our headers which are missing the colon, IOW they use * Return some value or * Returns some value Having the colon makes some sense, it should help kdoc parser avoid false positives. So add them. This is mostly done with a sed script, and removing the unnecessary cases (mostly the comments which aren't kdoc). Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20241205165914.1071102-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
0f6ede9fbc |
net: defer final 'struct net' free in netns dismantle
Ilya reported a slab-use-after-free in dst_destroy [1]
Issue is in xfrm6_net_init() and xfrm4_net_init() :
They copy xfrm[46]_dst_ops_template into net->xfrm.xfrm[46]_dst_ops.
But net structure might be freed before all the dst callbacks are
called. So when dst_destroy() calls later :
if (dst->ops->destroy)
dst->ops->destroy(dst);
dst->ops points to the old net->xfrm.xfrm[46]_dst_ops, which has been freed.
See a relevant issue fixed in :
|
||
|
Eric Dumazet
|
a6d75ecee2 |
net: lapb: increase LAPB_HEADER_LEN
It is unclear if net/lapb code is supposed to be ready for 8021q.
We can at least avoid crashes like the following :
skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282
RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600
RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000
RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60
R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140
R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016
FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_push+0xe5/0x100 net/core/skbuff.c:2636
nr_header+0x36/0x320 net/netrom/nr_dev.c:69
dev_hard_header include/linux/netdevice.h:3148 [inline]
vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83
dev_hard_header include/linux/netdevice.h:3148 [inline]
lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149
lapb_establish_data_link+0x84/0xd0
lapb_device_event+0x4e0/0x670
notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
__dev_notify_flags+0x207/0x400
dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922
devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188
inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x158/0x460 net/socket.c:1227
sock_ioctl+0x626/0x8e0 net/socket.c:1346
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
Fixes:
|
||
|
Alexander Lobakin
|
024bfd2e9d |
page_pool: make page_pool_put_page_bulk() handle array of netmems
Currently, page_pool_put_page_bulk() indeed takes an array of pointers to the data, not pages, despite the name. As one side effect, when you're freeing frags from &skb_shared_info, xdp_return_frame_bulk() converts page pointers to virtual addresses and then page_pool_put_page_bulk() converts them back. Moreover, data pointers assume every frag is placed in the host memory, making this function non-universal. Make page_pool_put_page_bulk() handle array of netmems. Pass frag netmems directly and use virt_to_netmem() when freeing xdpf->data, so that the PP core will then get the compound netmem and take care of the rest. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20241203173733.3181246-9-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Lobakin
|
9bd9f72a74 |
netmem: add a couple of page helper wrappers
Add the following netmem counterparts: * virt_to_netmem() -- simple page_to_netmem(virt_to_page()) wrapper; * netmem_is_pfmemalloc() -- page_is_pfmemalloc() for page-backed netmems, false otherwise; and the following "unsafe" versions: * __netmem_to_page() * __netmem_get_pp() * __netmem_address() They do the same as their non-underscored buddies, but assume the netmem is always page-backed. When working with header &page_pools, you don't need to check whether netmem belongs to the host memory and you can never get NULL instead of &page. Checks for the LSB, clearing the LSB, branches take cycles and increase object code size, sometimes significantly. When you're sure your PP is always host, you can avoid this by using the underscored counterparts. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20241203173733.3181246-8-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Lobakin
|
f65966fe01 |
xdp: allow attaching already registered memory model to xdp_rxq_info
One may need to register memory model separately from xdp_rxq_info. One simple example may be XDP test run code, but in general, it might be useful when memory model registering is managed by one layer and then XDP RxQ info by a different one. Allow such scenarios by adding a simple helper which "attaches" already registered memory model to the desired xdp_rxq_info. As this is mostly needed for Page Pool, add a special function to do that for a &page_pool pointer. Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241203173733.3181246-5-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Lobakin
|
dcf3827cde |
xdp, xsk: constify read-only arguments of some static inline helpers
Lots of read-only helpers for &xdp_buff and &xdp_frame, such as getting the frame length, skb_shared_info etc., don't have their arguments marked with `const` for no reason. Add the missing annotations to leave less place for mistakes and more for optimization. Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241203173733.3181246-4-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Lobakin
|
ca5c94949f |
xsk: align &xdp_buff_xsk harder
After the series "XSk buff on a diet" by Maciej, the greatest pow-2 which &xdp_buff_xsk can be divided got reduced from 16 to 8 on x86_64. Also, sizeof(xdp_buff_xsk) now is 120 bytes, which, taking the previous sentence into account, leads to that it leaves 8 bytes at the end of cacheline, which means an array of buffs will have its elements messed between the cachelines chaotically. Use __aligned_largest for this struct. This alignment is usually 16 bytes, which makes it fill two full cachelines and align an array nicely. ___cacheline_aligned may be excessive here, especially on arches with 128-256 byte CLs, as well as 32-bit arches (76 -> 96 bytes on MIPS32R2), while not doing better than _largest. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20241203173733.3181246-2-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
5765c7f6e3 |
net_sched: sch_fq: add three drop_reason
Add three new drop_reason, more precise than generic QDISC_DROP:
"tc -s qd" show aggregate counters, it might be more useful
to use drop_reason infrastructure for bug hunting.
1) SKB_DROP_REASON_FQ_BAND_LIMIT
Whenever a packet is added while its band limit is hit.
Corresponding value in "tc -s qd" is bandX_drops XXXX
2) SKB_DROP_REASON_FQ_HORIZON_LIMIT
Whenever a packet has a timestamp too far in the future.
Corresponding value in "tc -s qd" is horizon_drops XXXX
3) SKB_DROP_REASON_FQ_FLOW_LIMIT
Whenever a flow has reached its limit.
Corresponding value in "tc -s qd" is flows_plimit XXXX
Tested:
tc qd replace dev eth1 root fq flow_limit 10 limit 100000
perf record -a -e skb:kfree_skb sleep 1; perf script
udp_stream 12329 [004] 216.929492: skb:kfree_skb: skbaddr=0xffff888eabe17e00 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_FLOW_LIMIT
udp_stream 12385 [006] 216.929593: skb:kfree_skb: skbaddr=0xffff888ef8827f00 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_FLOW_LIMIT
udp_stream 12389 [005] 216.929871: skb:kfree_skb: skbaddr=0xffff888ecb9ba500 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_FLOW_LIMIT
udp_stream 12316 [009] 216.930398: skb:kfree_skb: skbaddr=0xffff888eca286b00 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_FLOW_LIMIT
udp_stream 12400 [008] 216.930490: skb:kfree_skb: skbaddr=0xffff888eabf93d00 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_FLOW_LIMIT
tc qd replace dev eth1 root fq flow_limit 100 limit 10000
perf record -a -e skb:kfree_skb sleep 1; perf script
udp_stream 18074 [001] 1058.318040: skb:kfree_skb: skbaddr=0xffffa23c881fc000 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_BAND_LIMIT
udp_stream 18126 [005] 1058.320651: skb:kfree_skb: skbaddr=0xffffa23c6aad4000 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_BAND_LIMIT
udp_stream 18118 [006] 1058.321065: skb:kfree_skb: skbaddr=0xffffa23df0d48a00 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_BAND_LIMIT
udp_stream 18074 [001] 1058.321126: skb:kfree_skb: skbaddr=0xffffa23c881ffa00 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_BAND_LIMIT
udp_stream 15815 [003] 1058.321224: skb:kfree_skb: skbaddr=0xffffa23c9835db00 rx_sk=(nil) protocol=34525 location=__dev_queue_xmit+0x9d9 reason: FQ_BAND_LIMIT
tc -s -d qd sh dev eth1
qdisc fq 8023: root refcnt 257 limit 10000p flow_limit 100p buckets 1024 orphan_mask 1023
bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 weights 589824 196608 65536 quantum 18Kb
initial_quantum 92120b low_rate_threshold 550Kbit refill_delay 40ms
timer_slack 10us horizon 10s horizon_drop
Sent 492439603330 bytes 336953991 pkt (dropped 61724094, overlimits 0 requeues 4463)
backlog 14611228b 9995p requeues 4463
flows 2965 (inactive 1151 throttled 0) band0_pkts 0 band1_pkts 9993 band2_pkts 0
gc 6347 highprio 0 fastpath 30 throttled 5 latency 2.32us flows_plimit 7403693
band1_drops 54320401
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241204171950.89829-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
302cc446cb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.13-rc2). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
896d8946da |
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
|
||
|
Paolo Abeni
|
7b998e073f |
Merge tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix esoteric undefined behaviour due to uninitialized stack access in ip_vs_protocol_init(), from Jinghao Jia. 2) Fix iptables xt_LED slab-out-of-bounds due to incorrect sanitization of the led string identifier, reported by syzbot. Patch from Dmitry Antipov. 3) Remove WARN_ON_ONCE reachable from userspace to check for the maximum cgroup level, nft_socket cgroup matching is restricted to 255 levels, but cgroups allow for INT_MAX levels by default. Reported by syzbot. 4) Fix nft_inner incorrect use of percpu area to store tunnel parser context with softirqs, resulting in inconsistent inner header offsets that could lead to bogus rule mismatches, reported by syzbot. 5) Grab module reference on ipset core while requesting set type modules, otherwise kernel crash is possible by removing ipset core module, patch from Phil Sutter. 6) Fix possible double-free in nft_hash garbage collector due to unstable walk interator that can provide twice the same element. Use a sequence number to skip expired/dead elements that have been already scheduled for removal. Based on patch from Laurent Fasnach netfilter pull request 24-12-05 * tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_hash: skip duplicated elements pending gc run netfilter: ipset: Hold module reference while requesting a module netfilter: nft_inner: incorrect percpu area handling under softirq netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level netfilter: x_tables: fix LED ID check in led_tg_check() ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init() ==================== Link: https://patch.msgid.link/20241205002854.162490-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Justin Iurman
|
0600cf40e9 |
include: net: add static inline dst_dev_overhead() to dst.h
Add static inline dst_dev_overhead() function to include/net/dst.h. This helper function is used by ioam6_iptunnel, rpl_iptunnel and seg6_iptunnel to get the dev's overhead based on a cache entry (dst_entry). If the cache is empty, the default and generic value skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev is returned. Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Cc: Alexander Lobakin <aleksander.lobakin@intel.com> Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Paolo Abeni
|
50b9420444 |
ipmr: tune the ipmr_can_free_table() checks.
Eric reported a syzkaller-triggered splat caused by recent ipmr changes:
WARNING: CPU: 2 PID: 6041 at net/ipv6/ip6mr.c:419
ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419
Modules linked in:
CPU: 2 UID: 0 PID: 6041 Comm: syz-executor183 Not tainted
6.12.0-syzkaller-10681-g65ae975e97d5 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419
Code: 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c
02 00 75 58 49 83 bc 24 c0 0e 00 00 00 74 09 e8 44 ef a9 f7 90 <0f> 0b
90 e8 3b ef a9 f7 48 8d 7b 38 e8 12 a3 96 f7 48 89 df be 0f
RSP: 0018:ffffc90004267bd8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88803c710000 RCX: ffffffff89e4d844
RDX: ffff88803c52c880 RSI: ffffffff89e4d87c RDI: ffff88803c578ec0
RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88803c578000
R13: ffff88803c710000 R14: ffff88803c710008 R15: dead000000000100
FS: 00007f7a855ee6c0(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7a85689938 CR3: 000000003c492000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ip6mr_rules_exit+0x176/0x2d0 net/ipv6/ip6mr.c:283
ip6mr_net_exit_batch+0x53/0xa0 net/ipv6/ip6mr.c:1388
ops_exit_list+0x128/0x180 net/core/net_namespace.c:177
setup_net+0x4fe/0x860 net/core/net_namespace.c:394
copy_net_ns+0x2b4/0x6b0 net/core/net_namespace.c:500
create_new_namespaces+0x3ea/0xad0 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x45d/0xa40 kernel/fork.c:3334
__do_sys_unshare kernel/fork.c:3405 [inline]
__se_sys_unshare kernel/fork.c:3403 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3403
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7a856332d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7a855ee238 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f7a856bd308 RCX: 00007f7a856332d9
RDX: 00007f7a8560f8c6 RSI: 0000000000000000 RDI: 0000000062040200
RBP: 00007f7a856bd300 R08: 00007fff932160a7 R09: 00007f7a855ee6c0
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a856bd30c
R13: 0000000000000000 R14: 00007fff93215fc0 R15: 00007fff932160a8
</TASK>
The root cause is a network namespace creation failing after successful
initialization of the ipmr subsystem. Such a case is not currently
matched by the ipmr_can_free_table() helper.
New namespaces are zeroed on allocation and inserted into net ns list
only after successful creation; when deleting an ipmr table, the list
next pointer can be NULL only on netns initialization failure.
Update the ipmr_can_free_table() checks leveraging such condition.
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+6e8cb445d4b43d006e0c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6e8cb445d4b43d006e0c
Fixes:
|
||
|
Pablo Neira Ayuso
|
7b1d83da25 |
netfilter: nft_inner: incorrect percpu area handling under softirq
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes:
|
||
|
Felix Fietkau
|
52cebabb12 |
wifi: mac80211: fix vif addr when switching from monitor to station
Since adding support for opting out of virtual monitor support, a zero vif
addr was used to indicate passive vs active monitor to the driver.
This would break the vif->addr when changing the netdev mac address before
switching the interface from monitor to sta mode.
Fix the regression by adding a separate flag to indicate whether vif->addr
is valid.
Reported-by: syzbot+9ea265d998de25ac6a46@syzkaller.appspotmail.com
Fixes:
|
||
|
Emmanuel Grumbach
|
11ac0d7c3b |
wifi: mac80211: fix a queue stall in certain cases of CSA
If we got an unprotected action frame with CSA and then we heard the
beacon with the CSA IE, we'll block the queues with the CSA reason
twice. Since this reason is refcounted, we won't wake up the queues
since we wake them up only once and the ref count will never reach 0.
This led to blocked queues that prevented any activity (even
disconnection wouldn't reset the queue state and the only way to recover
would be to reload the kernel module.
Fix this by not refcounting the CSA reason.
It becomes now pointless to maintain the csa_blocked_queues state.
Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes:
|
||
|
Linus Torvalds
|
6a34dfa15d |
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada: - Add generic support for built-in boot DTB files - Enable TAB cycling for dialog buttons in nconfig - Fix issues in streamline_config.pl - Refactor Kconfig - Add support for Clang's AutoFDO (Automatic Feedback-Directed Optimization) - Add support for Clang's Propeller, a profile-guided optimization. - Change the working directory to the external module directory for M= builds - Support building external modules in a separate output directory - Enable objtool for *.mod.o and additional kernel objects - Use lz4 instead of deprecated lz4c - Work around a performance issue with "git describe" - Refactor modpost * tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits) kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms gitignore: Don't ignore 'tags' directory kbuild: add dependency from vmlinux to resolve_btfids modpost: replace tdb_hash() with hash_str() kbuild: deb-pkg: add python3:native to build dependency genksyms: reduce indentation in export_symbol() modpost: improve error messages in device_id_check() modpost: rename alias symbol for MODULE_DEVICE_TABLE() modpost: rename variables in handle_moddevtable() modpost: move strstarts() to modpost.h modpost: convert do_usb_table() to a generic handler modpost: convert do_of_table() to a generic handler modpost: convert do_pnp_device_entry() to a generic handler modpost: convert do_pnp_card_entries() to a generic handler modpost: call module_alias_printf() from all do_*_entry() functions modpost: pass (struct module *) to do_*_entry() functions modpost: remove DEF_FIELD_ADDR_VAR() macro modpost: deduplicate MODULE_ALIAS() for all drivers modpost: introduce module_alias_printf() helper modpost: remove unnecessary check in do_acpi_entry() ... |
||
|
Eric Dumazet
|
0a4cc4accf |
tcp: populate XPS related fields of timewait sockets
syzbot reported that netdev_core_pick_tx() was reading an uninitialized field [1]. This is indeed hapening for timewait sockets after recent commits. We can copy the original established socket sk_tx_queue_mapping and sk_rx_queue_mapping fields, instead of adding more checks in fast paths. As a bonus, packets will use the same transmit queue than prior ones, this potentially can avoid reordering. [1] BUG: KMSAN: uninit-value in netdev_pick_tx+0x5c7/0x1550 netdev_pick_tx+0x5c7/0x1550 netdev_core_pick_tx+0x1d2/0x4a0 net/core/dev.c:4312 __dev_queue_xmit+0x128a/0x57d0 net/core/dev.c:4394 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236 __ip_finish_output+0x287/0x810 ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434 dst_output include/net/dst.h:450 [inline] ip_local_out net/ipv4/ip_output.c:130 [inline] ip_send_skb net/ipv4/ip_output.c:1505 [inline] ip_push_pending_frames+0x444/0x570 net/ipv4/ip_output.c:1525 ip_send_unicast_reply+0x18c1/0x1b30 net/ipv4/ip_output.c:1672 tcp_v4_send_reset+0x238d/0x2a40 net/ipv4/tcp_ipv4.c:910 tcp_v4_rcv+0x48f8/0x5750 net/ipv4/tcp_ipv4.c:2431 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:578 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:628 [inline] ip_sublist_rcv+0x15f3/0x17f0 net/ipv4/ip_input.c:636 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:670 __netif_receive_skb_list_ptype net/core/dev.c:5715 [inline] __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x3d4/0x810 net/core/dev.c:6256 virtqueue_napi_complete drivers/net/virtio_net.c:758 [inline] virtnet_poll+0x5d80/0x6bf0 drivers/net/virtio_net.c:3013 __napi_poll+0xe7/0x980 net/core/dev.c:6877 napi_poll net/core/dev.c:6946 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7068 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0x68/0x180 kernel/softirq.c:655 irq_exit_rcu+0x12/0x20 kernel/softirq.c:671 common_interrupt+0x97/0xb0 arch/x86/kernel/irq.c:278 asm_common_interrupt+0x2b/0x40 arch/x86/include/asm/idtentry.h:693 __preempt_count_sub arch/x86/include/asm/preempt.h:84 [inline] kmsan_virt_addr_valid arch/x86/include/asm/kmsan.h:95 [inline] virt_to_page_or_null+0xfb/0x150 mm/kmsan/shadow.c:75 kmsan_get_metadata+0x13e/0x1c0 mm/kmsan/shadow.c:141 kmsan_get_shadow_origin_ptr+0x4d/0xb0 mm/kmsan/shadow.c:102 get_shadow_origin_ptr mm/kmsan/instrumentation.c:38 [inline] __msan_metadata_ptr_for_store_4+0x27/0x40 mm/kmsan/instrumentation.c:93 rcu_preempt_read_enter kernel/rcu/tree_plugin.h:390 [inline] __rcu_read_lock+0x46/0x70 kernel/rcu/tree_plugin.h:413 rcu_read_lock include/linux/rcupdate.h:847 [inline] batadv_nc_purge_orig_hash net/batman-adv/network-coding.c:408 [inline] batadv_nc_worker+0x114/0x19e0 net/batman-adv/network-coding.c:719 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xae0/0x1c40 kernel/workqueue.c:3310 worker_thread+0xea7/0x14f0 kernel/workqueue.c:3391 kthread+0x3e2/0x540 kernel/kthread.c:389 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was created at: __alloc_pages_noprof+0x9a7/0xe00 mm/page_alloc.c:4774 alloc_pages_mpol_noprof+0x299/0x990 mm/mempolicy.c:2265 alloc_pages_noprof+0x1bf/0x1e0 mm/mempolicy.c:2344 alloc_slab_page mm/slub.c:2412 [inline] allocate_slab+0x320/0x12e0 mm/slub.c:2578 new_slab mm/slub.c:2631 [inline] ___slab_alloc+0x12ef/0x35e0 mm/slub.c:3818 __slab_alloc mm/slub.c:3908 [inline] __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] kmem_cache_alloc_noprof+0x57a/0xb20 mm/slub.c:4141 inet_twsk_alloc+0x11f/0x9d0 net/ipv4/inet_timewait_sock.c:188 tcp_time_wait+0x83/0xf50 net/ipv4/tcp_minisocks.c:309 tcp_rcv_state_process+0x145a/0x49d0 tcp_v4_do_rcv+0xbf9/0x11a0 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:578 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:628 [inline] ip_sublist_rcv+0x15f3/0x17f0 net/ipv4/ip_input.c:636 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:670 __netif_receive_skb_list_ptype net/core/dev.c:5715 [inline] __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x3d4/0x810 net/core/dev.c:6256 virtqueue_napi_complete drivers/net/virtio_net.c:758 [inline] virtnet_poll+0x5d80/0x6bf0 drivers/net/virtio_net.c:3013 __napi_poll+0xe7/0x980 net/core/dev.c:6877 napi_poll net/core/dev.c:6946 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7068 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0x68/0x180 kernel/softirq.c:655 irq_exit_rcu+0x12/0x20 kernel/softirq.c:671 common_interrupt+0x97/0xb0 arch/x86/kernel/irq.c:278 asm_common_interrupt+0x2b/0x40 arch/x86/include/asm/idtentry.h:693 CPU: 0 UID: 0 PID: 3962 Comm: kworker/u8:18 Not tainted 6.12.0-syzkaller-09073-g9f16d5e6f220 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: bat_events batadv_nc_worker Fixes: |
||
|
Masahiro Yamada
|
dbefa1f31a |
Rename .data.once to .data..once to fix resetting WARN*_ONCE
Commit |
||
|
Linus Torvalds
|
fcc79e1714 |
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
||
|
Linus Torvalds
|
5591fd5e03 |
Merge tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore: "Thirteen patches, all focused on moving away from the current 'secid' LSM identifier to a richer 'lsm_prop' structure. This move will help reduce the translation that is necessary in many LSMs, offering better performance, and make it easier to support different LSMs in the future" * tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lsm: remove lsm_prop scaffolding netlabel,smack: use lsm_prop for audit data audit: change context data from secid to lsm_prop lsm: create new security_cred_getlsmprop LSM hook audit: use an lsm_prop in audit_names lsm: use lsm_prop in security_inode_getsecid lsm: use lsm_prop in security_current_getsecid audit: update shutdown LSM data lsm: use lsm_prop in security_ipc_getsecid audit: maintain an lsm_prop in audit_context lsm: add lsmprop_to_secctx hook lsm: use lsm_prop in security_audit_rule_match lsm: add the lsm_prop data structure |
||
|
Philo Lu
|
1b29a730ef |
ipv6/udp: Add 4-tuple hash for connected socket
Implement ipv6 udp hash4 like that in ipv4. The major difference is that the hash value should be calculated with udp6_ehashfn(). Besides, ipv4-mapped ipv6 address is handled before hash() and rehash(). Export udp_ehashfn because now we use it in udpv6 rehash. Core procedures of hash/unhash/rehash are same as ipv4, and udpv4 and udpv6 share the same udptable, so some functions in ipv4 hash4 can also be shared. Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com> Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com> Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Philo Lu
|
78c91ae2c6 |
ipv4/udp: Add 4-tuple hash for connected socket
Currently, the udp_table has two hash table, the port hash and portaddr
hash. Usually for UDP servers, all sockets have the same local port and
addr, so they are all on the same hash slot within a reuseport group.
In some applications, UDP servers use connect() to manage clients. In
particular, when firstly receiving from an unseen 4 tuple, a new socket
is created and connect()ed to the remote addr:port, and then the fd is
used exclusively by the client.
Once there are connected sks in a reuseport group, udp has to score all
sks in the same hash2 slot to find the best match. This could be
inefficient with a large number of connections, resulting in high
softirq overhead.
To solve the problem, this patch implement 4-tuple hash for connected
udp sockets. During connect(), hash4 slot is updated, as well as a
corresponding counter, hash4_cnt, in hslot2. In __udp4_lib_lookup(),
hslot4 will be searched firstly if the counter is non-zero. Otherwise,
hslot2 is used like before. Note that only connected sockets enter this
hash4 path, while un-connected ones are not affected.
hlist_nulls is used for hash4, because we probably move to another hslot
wrongly when lookup with concurrent rehash. Then we check nulls at the
list end to see if we should restart lookup. Because udp does not use
SLAB_TYPESAFE_BY_RCU, we don't need to touch sk_refcnt when lookup.
Stress test results (with 1 cpu fully used) are shown below, in pps:
(1) _un-connected_ socket as server
[a] w/o hash4: 1,825176
[b] w/ hash4: 1,831750 (+0.36%)
(2) 500 _connected_ sockets as server
[c] w/o hash4: 290860 (only 16% of [a])
[d] w/ hash4: 1,889658 (+3.1% compared with [b])
With hash4, compute_score is skipped when lookup, so [d] is slightly
better than [b].
Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com>
Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com>
Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Philo Lu
|
dab78a1745 |
net/udp: Add 4-tuple hash list basis
Add a new hash list, hash4, in udp table. It will be used to implement 4-tuple hash for connected udp sockets. This patch adds the hlist to table, and implements helpers and the initialization. 4-tuple hash is implemented in the following patch. hash4 uses hlist_nulls to avoid moving wrongly onto another hlist due to concurrent rehash, because rehash() can happen with lookup(). Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com> Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com> Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Philo Lu
|
accdd51dc7 |
net/udp: Add a new struct for hash2 slot
Preparing for udp 4-tuple hash (uhash4 for short). To implement uhash4 without cache line missing when lookup, hslot2 is used to record the number of hashed sockets in hslot4. Thus adding a new struct udp_hslot_main with field hash4_cnt, which is used by hash2. The new struct is used to avoid doubling the size of udp_hslot. Before uhash4 lookup, firstly checking hash4_cnt to see if there are hashed sks in hslot4. Because hslot2 is always used in lookup, there is no cache line miss. Related helpers are updated, and use the helpers as possible. uhash4 is implemented in following patches. Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
David S. Miller
|
296a681def |
Merge tag 'ipsec-next-2024-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says: ==================== ipsec-next-11-15 1) Add support for RFC 9611 per cpu xfrm state handling. 2) Add inbound and outbound xfrm state caches to speed up state lookups. 3) Convert xfrm to dscp_t. From Guillaume Nault. 4) Fix error handling in build_aevent. From Everest K.C. 5) Replace strncpy with strscpy_pad in copy_to_user_auth. From Daniel Yang. 6) Fix an uninitialized symbol during acquire state insertion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jakub Kicinski
|
6cd663f03f |
Merge tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: add Foxconn 0xe0fc for Qualcomm WCN785x - btmtk: Fix ISO interface handling - Add quirk for ATS2851 - btusb: Add RTL8852BE device 0489:e123 - ISO: Do not emit LE PA/BIG Create Sync if previous is pending - btusb: Add USB HW IDs for MT7920/MT7925 - btintel_pcie: Add handshake between driver and firmware - btintel_pcie: Add recovery mechanism - hci_conn: Use disable_delayed_work_sync - SCO: Use kref to track lifetime of sco_conn - ISO: Use kref to track lifetime of iso_conn - btnxpuart: Add GPIO support to power save feature - btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x * tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits) Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC Bluetooth: fix use-after-free in device_for_each_child() Bluetooth: btintel: Direct exception event to bluetooth stack Bluetooth: hci_core: Fix calling mgmt_device_connected Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper Bluetooth: ISO: Send BIG Create Sync via hci_sync Bluetooth: hci_conn: Remove alloc from critical section Bluetooth: ISO: Use kref to track lifetime of iso_conn Bluetooth: SCO: Use kref to track lifetime of sco_conn Bluetooth: HCI: Add IPC(11) bus type Bluetooth: btusb: Add 3 HWIDs for MT7925 Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925 Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slave Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending Bluetooth: ISO: Fix matching parent socket for BIS slave Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name() Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925 Bluetooth: btmtk: adjust the position to init iso data anchor ... ==================== Link: https://patch.msgid.link/20241114214731.1994446-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
26a3beee24 |
Merge tag 'nf-next-24-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Extended netlink error reporting if nfnetlink attribute parser fails, from Donald Hunter. 2) Incorrect request_module() module, from Simon Horman. 3) A series of patches to reduce memory consumption for set element transactions. Florian Westphal says: "When doing a flush on a set or mass adding/removing elements from a set, each element needs to allocate 96 bytes to hold the transactional state. In such cases, virtually all the information in struct nft_trans_elem is the same. Change nft_trans_elem to a flex-array, i.e. a single nft_trans_elem can hold multiple set element pointers. The number of elements that can be stored in one nft_trans_elem is limited by the slab allocator, this series limits the compaction to at most 62 elements as it caps the reallocation to 2048 bytes of memory." 4) A series of patches to prepare the transition to dscp_t in .flowi_tos. From Guillaume Nault. 5) Support for bitwise operations with two source registers, from Jeremy Sowden. * tag 'nf-next-24-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: bitwise: add support for doing AND, OR and XOR directly netfilter: bitwise: rename some boolean operation functions netfilter: nf_dup4: Convert nf_dup_ipv4_route() to dscp_t. netfilter: nft_fib: Convert nft_fib4_eval() to dscp_t. netfilter: rpfilter: Convert rpfilter_mt() to dscp_t. netfilter: flow_offload: Convert nft_flow_route() to dscp_t. netfilter: ipv4: Convert ip_route_me_harder() to dscp_t. netfilter: nf_tables: allocate element update information dynamically netfilter: nf_tables: switch trans_elem to real flex array netfilter: nf_tables: prepare nft audit for set element compaction netfilter: nf_tables: prepare for multiple elements in nft_trans_elem structure netfilter: nf_tables: add nft_trans_commit_list_add_elem helper netfilter: bpf: Pass string literal as format argument of request_module() netfilter: nfnetlink: Report extack policy errors for batched ops ==================== Link: https://patch.msgid.link/20241115133207.8907-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |