drm-misc-next for 5.2:
UAPI Changes:
-syncobj: Add TIMELINE_WAIT|QUERY|TRANSFER|TIMELINE_SIGNAL ioctls (Chunming)
-Clarify that 1.0 can be represented by drm_color_lut (Daniel)
Cross-subsystem Changes:
-dt-bindings: Add binding for rk3066 hdmi (Johan)
-dt-bindings: Add binding for Feiyang FY07024DI26A30-D panel (Jagan)
-dt-bindings: Add Rocktech vendor prefix and jh057n00900 panel bindings (Guido)
-MAINTAINERS: Add lima and ASPEED entries (Joel & Qiang)
Core Changes:
-memory: use dma_alloc_coherent when mem encryption is active (Christian)
-dma_buf: add support for a dma_fence chain (Christian)
-shmem_gem: fix off-by-one bug in new shmem gem helpers (Dan)
Driver Changes:
-rockchip: Add support for rk3066 hdmi (Johan)
-ASPEED: Add driver supporting ASPEED BMC display controller to drm (Joel)
-lima: Add driver supporting Arm Mali4xx gpus to drm (Qiang)
-vc4/v3d: Various cleanups and improved error handling (Eric)
-panel: Add support for Feiyang FY07024DI26A30-D MIPI-DSI panel (Jagan)
-panel: Add support for Rocktech jh057n00900 MIPI-DSI panel (Guido)
Cc: Johan Jonker <jbx6244@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Joel Stanley <joel@jms.id.au>
[airlied: fixed XA limit build breakage, Rodrigo also submitted the same patch, but
I squashed it in the merge.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404201016.GA139524@art_vandelay
amdgpu:
- Switch to HMM for userptr (reverted until HMM fixes land)
- New experimental SMU 11 replacement for powerplay for vega20 (not enabled by default)
- Initial RAS support for vega20
- BACO support for vega12
- BACO fixes for vega20
- Rework IH handling for page fault and retry interrupts
- Cleanly split CPU and GPU paths for GPUVM updates
- Powerplay fixes
- XGMI fixes
- Rework how DC interacts with atomic for planes
- Clean up and simplify DC/Powerplay interfaces
- Misc cleanups and bug fixes
amdkfd:
- Switch to HMM for userptr (reverted until HMM fixes land)
- Add initial RAS support
- MQD fixes
ttm:
- Unify DRM_FILE_PAGE_OFFSET handling
- Account for kernel allocations in kernel zone only
- Misc cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402170820.22197-1-alexander.deucher@amd.com
- Mali 4xx GPUs have two kinds of processors GP and PP. GP is for
OpenGL vertex shader processing and PP is for fragment shader
processing. Each processor has its own MMU so prcessors work in
virtual address space.
- There's only one GP but multiple PP (max 4 for mali 400 and 8
for mali 450) in the same mali 4xx GPU. All PPs are grouped
togather to handle a single fragment shader task divided by
FB output tiled pixels. Mali 400 user space driver is
responsible for assign target tiled pixels to each PP, but mali
450 has a HW module called DLBU to dynamically balance each
PP's load.
- User space driver allocate buffer object and map into GPU
virtual address space, upload command stream and draw data with
CPU mmap of the buffer object, then submit task to GP/PP with
a register frame indicating where is the command stream and misc
settings.
- There's no command stream validation/relocation due to each user
process has its own GPU virtual address space. GP/PP's MMU switch
virtual address space before running two tasks from different
user process. Error or evil user space code just get MMU fault
or GP/PP error IRQ, then the HW/SW will be recovered.
- Use GEM+shmem for MM. Currently just alloc and pin memory when
gem object creation. GPU vm map of the buffer is also done in
the alloc stage in kernel space. We may delay the memory
allocation and real GPU vm map to command submission stage in the
furture as improvement.
- Use drm_sched for GPU task schedule. Each OpenGL context should
have a lima context object in the kernel to distinguish tasks
from different user. drm_sched gets task from each lima context
in a fair way.
mesa driver can be found here before upstreamed:
https://gitlab.freedesktop.org/lima/mesa
v8:
- add comments for in_sync
- fix ctx free miss mutex unlock
v7:
- remove lima_fence_ops with default value
- move fence slab create to device probe
- check pad ioctl args to be zero
- add comments for user/kernel interface
v6:
- fix comments by checkpatch.pl
v5:
- export gp/pp version to userspace
- rebase on drm-misc-next
v4:
- use get param interface to get info
- separate context create/free ioctl
- remove unused max sched task param
- update copyright time
- use xarray instead of idr
- stop using drmP.h
v3:
- fix comments from kbuild robot
- restrict supported arch to tested ones
v2:
- fix syscall argument check
- fix job finish fence leak since kernel 5.0
- use drm syncobj to replace native fence
- move buffer object GPU va map into kernel
- reserve syscall argument space for future info
- remove kernel gem modifier
- switch TTM back to GEM+shmem MM
- use time based io poll
- use whole register name
- adopt gem reservation obj integration
- use drm_timeout_abs_to_jiffies
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh@kerrnel.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/291200/
Lockless container implementation similar to a dma_fence_array, but with
only two elements per node and automatic garbage collection.
v2: properly document dma_fence_chain_for_each, add dma_fence_chain_find_seqno,
drop prev reference during garbage collection if it's not a chain fence.
v3: use head and iterator for dma_fence_chain_for_each
v4: fix reference count in dma_fence_chain_enable_signaling
v5: fix iteration when walking each chain node
v6: add __rcu for member 'prev' of struct chain node
v7: fix rcu warnings from kernel robot
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/295778/?series=58813&rev=1
drm_framebuffer.h makes use of a pointer to struct drm_format_info but
doesn't include drm_fourcc.h (neither directly nor indirectly).
Forward-declare the structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
The fbdev split between fix and var information is kinda
pointless for drm drivers since everything is fixed: The fbdev
emulation doesn't support changing modes at all.
Create a new simplified helper and use it in the generic fbdev
helper code. Follow-up patches will beef it up more and roll
it out to all drivers.
v2: We need to keep sizes, since they might not match the fb dimensions
(Noralf)
v3: Fix typo in commit message and remove extraneous line in kerneldoc (Noralf)
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-1-daniel.vetter@ffwll.ch
drm-misc-next for 5.2:
UAPI Changes:
- Add Colorspace connector property (Uma)
- fourcc: Several new YUV formats from ARM (Brian & Ayan)
- fourcc: Fix merge conflicts between new formats above and Swati's that
went in via topic/hdr-formats-2019-03-07 branch (Maarten)
Cross-subsystem Changes:
- Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel)
Core Changes:
- Improve component helper documentation (Daniel)
- Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf)
- Add device managed (devm) drm_device init function (Noralf)
- Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf)
- Move MIPI/DSI rate control params computation into core from i915 (David)
- Add support for shmem backed gem objects (Noralf)
Driver Changes:
- various: Use of_node_name_eq for node name comparisons (Rob Herring)
- sun4i: Add DSI burst mode support (Konstantin)
- panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin)
- virtio: A few prime improvements (Gerd)
- tinydrm: Remove tinydrm_device (Noralf)
- vc4: Add load tracker to driver to detect underflow in atomic check (Boris)
- vboxvideo: Move it out of staging \o/ (Hans)
- v3d: Add support for V3D v4.2 (Eric)
Cc: Konstantin Sudakov <k.sudakov@integrasources.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Ayan Kumar Halder <ayan.halder@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Prevent potential NULL pointer dereferences in the HPET and HyperV
code
- Exclude the GART aperture from /proc/kcore to prevent kernel
crashes on access
- Use the correct macros for Cyrix I/O on Geode processors
- Remove yet another kernel address printk leak
- Announce microcode reload completion as requested by quite some
people. Microcode loading has become popular recently.
- Some 'Make Clang' happy fixlets
- A few cleanups for recently added code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/gart: Exclude GART aperture from kcore
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
x86/mm/pti: Make local symbols static
x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
x86/microcode: Announce reload operation's completion
x86/hyperv: Prevent potential NULL pointer dereference
x86/hpet: Prevent potential NULL pointer dereference
x86/lib: Fix indentation issue, remove extra tab
x86/boot: Restrict header scope to make Clang happy
x86/mm: Don't leak kernel addresses
x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:
- Remove secondary GIC support on systems w/o device-tree support
- A set of small fixlets in various irqchip drivers
- static and fall-through annotations
- Kernel doc and typo fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Mark expected switch case fall-through
genirq/devres: Remove excess parameter from kernel doc
irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
irqchip/mbigen: Don't clear eventid when freeing an MSI
irqchip/stm32: Don't set rising configuration registers at init
irqchip/stm32: Don't clear rising/falling config registers at init
dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
irqchip/mmp: Make mmp_irq_domain_ops static
irqchip/brcmstb-l2: Make two init functions static
genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
irqchip/gic: Drop support for secondary GIC in non-DT systems
irqchip/imx-irqsteer: Fix of_property_read_u32() error handling
Pull auxdisplay updates from Miguel Ojeda:
"A few fixes and improvements for auxdisplay:
- Series to fix a memory leak in hd44780 while introducing
charlcd_free(). From Andy Shevchenko
- Series to clean up the Kconfig menus and a couple of improvements
for charlcd. From Mans Rullgard"
* tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux:
auxdisplay: charlcd: make backlight initial state configurable
auxdisplay: charlcd: simplify init message display
auxdisplay: deconfuse configuration
auxdisplay: hd44780: Convert to use charlcd_free()
auxdisplay: panel: Convert to use charlcd_free()
auxdisplay: charlcd: Introduce charlcd_free() helper
auxdisplay: charlcd: Move to_priv() to charlcd namespace
auxdisplay: hd44780: Fix memory leak on ->remove()
Pull io_uring fixes and improvements from Jens Axboe:
"The first five in this series are heavily inspired by the work Al did
on the aio side to fix the races there.
The last two re-introduce a feature that was in io_uring before it got
merged, but which I pulled since we didn't have a good way to have
BVEC iters that already have a stable reference. These aren't
necessarily related to block, it's just how io_uring pins fixed
buffers"
* tag 'io_uring-20190323' of git://git.kernel.dk/linux-block:
block: add BIO_NO_PAGE_REF flag
iov_iter: add ITER_BVEC_FLAG_NO_REF flag
io_uring: mark me as the maintainer
io_uring: retry bulk slab allocs as single allocs
io_uring: fix poll races
io_uring: fix fget/fput handling
io_uring: add prepped flag
io_uring: make io_read/write return an integer
io_uring: use regular request ref counts
Pull block fixes from Jens Axboe:
"A set of fixes/changes that should go into this series. This contains:
- Kernel doc / comment updates (Bart, Shenghui)
- Un-export of core-only used function (Bart)
- Fix race on loop file access (Dongli)
- pf/pcd queue cleanup fixes (me)
- Use appropriate helper for RESTART bit set (Yufen)
- Use named identifier for classic poll (Yufen)"
* tag 'for-linus-20190323' of git://git.kernel.dk/linux-block:
sbitmap: trivial - update comment for sbitmap_deferred_clear_bit
blkcg: Fix kernel-doc warnings
blk-iolatency: #include "blk.h"
block: Unexport blk_mq_add_to_requeue_list()
block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx
loop: access lo_backing_file only when the loop device is Lo_bound
blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
paride/pcd: cleanup queues when detection fails
paride/pf: cleanup queues when detection fails
Pull ceph fixes from Ilya Dryomov:
"A follow up for the new alloc_size logic and a blacklisting fix,
marked for stable"
* tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client:
rbd: drop wait_for_latest_osdmap()
libceph: wait for latest osdmap in ceph_monc_blacklist_add()
rbd: set io_min, io_opt and discard_granularity to alloc_size
On machines where the GART aperture is mapped over physical RAM,
/proc/kcore contains the GART aperture range. Accessing the GART range via
/proc/kcore results in a kernel crash.
vmcore used to have the same issue, until it was fixed with commit
2a3e83c6f9 ("x86/gart: Exclude GART aperture from vmcore")', leveraging
existing hook infrastructure in vmcore to let /proc/vmcore return zeroes
when attempting to read the aperture region, and so it won't read from the
actual memory.
Apply the same workaround for kcore. First implement the same hook
infrastructure for kcore, then reuse the hook functions introduced in the
previous vmcore fix. Just with some minor adjustment, rename some functions
for more general usage, and simplify the hook infrastructure a bit as there
is no module usage yet.
Suggested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Dave Young <dyoung@redhat.com>
Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com
Previously, our view has been always to run the engines independently
within a context. (Multiple engines happened before we had contexts and
timelines, so they always operated independently and that behaviour
persisted into contexts.) However, at the user level the context often
represents a single timeline (e.g. GL contexts) and userspace must
ensure that the individual engines are serialised to present that
ordering to the client (or forgot about this detail entirely and hope no
one notices - a fair ploy if the client can only directly control one
engine themselves ;)
In the next patch, we will want to construct a set of engines that
operate as one, that have a single timeline interwoven between them, to
present a single virtual engine to the user. (They submit to the virtual
engine, then we decide which engine to execute on based.)
To that end, we want to be able to create contexts which have a single
timeline (fence context) shared between all engines, rather than multiple
timelines.
v2: Move the specialised timeline ordering to its own function.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-4-chris@chris-wilson.co.uk
It can be useful to have a single ioctl to create a context with all
the initial parameters instead of a series of create + setparam + setparam
ioctls. This extension to create context allows any of the parameters
to be passed in as a linked list to be applied to the newly constructed
context.
v2: Make a local copy of user setparam (Tvrtko)
v3: Use flags to detect availability of extension interface
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-3-chris@chris-wilson.co.uk
In preparation to making the ppGTT binding for a context explicit (to
facilitate reusing the same ppGTT between different contexts), allow the
user to create and destroy named ppGTT.
v2: Replace global barrier for swapping over the ppgtt and tlbs with a
local context barrier (Tvrtko)
v3: serialise with struct_mutex; it's lazy but required dammit
v4: Rewrite igt_ctx_shared_exec to be more different (aimed to be more
similarly, turned out different!)
v5: Fix up test unwind for aliasing-ppgtt (snb)
v6: Tighten language for uapi struct drm_i915_gem_vm_control.
v7: Patch the context image for runtime ppgtt switching!
Testcase: igt/gem_vm_create
Testcase: igt/gem_ctx_param/vm
Testcase: igt/gem_ctx_clone/vm
Testcase: igt/gem_ctx_shared
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-2-chris@chris-wilson.co.uk
An idea for extending uABI inspired by Vulkan's extension chains.
Instead of expanding the data struct for each ioctl every time we need
to add a new feature, define an extension chain instead. As we add
optional interfaces to control the ioctl, we define a new extension
struct that can be linked into the ioctl data only when required by the
user. The key advantage being able to ignore large control structs for
optional interfaces/extensions, while being able to process them in a
consistent manner.
In comparison to other extensible ioctls, the key difference is the
use of a linked chain of extension structs vs an array of tagged
pointers. For example,
struct drm_amdgpu_cs_chunk {
__u32 chunk_id;
__u32 length_dw;
__u64 chunk_data;
};
struct drm_amdgpu_cs_in {
__u32 ctx_id;
__u32 bo_list_handle;
__u32 num_chunks;
__u32 _pad;
__u64 chunks;
};
allows userspace to pass in array of pointers to extension structs, but
must therefore keep constructing that array along side the command stream.
In dynamic situations like that, a linked list is preferred and does not
similar from extra cache line misses as the extension structs themselves
must still be loaded separate to the chunks array.
v2: Apply the tail call optimisation directly to nip the worry of stack
overflow in the bud.
v3: Defend against recursion.
v4: Fixup local types to match new uabi
Opens:
- do we include the result as an out-field in each chain?
struct i915_user_extension {
__u64 next_extension;
__u64 name;
__s32 result;
__u32 mbz; /* reserved for future use */
};
* Undecided, so provision some room for future expansion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-1-chris@chris-wilson.co.uk
