Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Don't return a garbage screen info when EFI framebuffer is not
available
- Make the early EFI console work properly with wider fonts instead
of drawing garbage
- Prevent a memory buffer leak in allocate_e820()
- Print the firmware error record properly so it can be decoded by
users
- Fix a symbol clash in the host tool build which only happens with
newer compilers.
- Add a missing check for the event log version of TPM which caused
boot failures on several Dell systems due to an attempt to decode
SHA-1 format with the crypto agile algorithm"
* tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tpm: check event log version before reading final events
efi: Pull up arch-specific prototype efi_systab_show_arch()
x86/boot: Mark global variables as static
efi: cper: Add support for printing Firmware Error Record Reference
efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820()
efi/earlycon: Fix early printk for wider fonts
efi/libstub: Avoid returning uninitialized data from setup_graphics()
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Unbreak stack dumps for inactive tasks by interpreting the special
first frame left by __switch_to_asm() correctly.
The recent change not to skip the first frame so ORC and frame
unwinder behave in the same way caused all entries to be
unreliable, i.e. prepended with '?'.
- Use cpumask_available() instead of an implicit NULL check of a
cpumask_var_t in mmio trace to prevent a Clang build warning"
* tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks
x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables
The srmmu_nocache_init() uses __nocache_fix() macro to add an offset to
page table entry to access srmmu_nocache_pool.
But since sparc32 has only three actual page table levels, pgd, p4d and
pud are essentially the same thing and pgd_offset() and p4d_offset() are
no-ops, the __nocache_fix() should be done only at PUD level.
Remove __nocache_fix() for p4d_offset() and pud_offset() and keep it
only for PUD and lower levels.
Fixes: c2bc26f7ca ("sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add files related to kdump
z3fold: fix use-after-free when freeing handles
sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()
MAINTAINERS: update email address for Naoya Horiguchi
sh: include linux/time_types.h for sockios
kasan: disable branch tracing for core runtime
selftests/vm/write_to_hugetlbfs.c: fix unused variable warning
selftests/vm/.gitignore: add mremap_dontunmap
rapidio: fix an error in get_user_pages_fast() error handling
x86: bitops: fix build regression
device-dax: don't leak kernel memory to user space after unloading kmem
Pull s390 fixes from Vasily Gorbik:
- Add missing R_390_JMP_SLOT relocation type in KASLR code.
- Fix set_huge_pte_at for empty ptes issue which has been uncovered
with arch page table helper tests.
- Correct initrd location for kdump kernel.
- Fix s390_mmio_read/write with MIO in PCI code.
* tag 's390-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/kaslr: add support for R_390_JMP_SLOT relocation type
s390/mm: fix set_huge_pte_at() for empty ptes
s390/kexec_file: fix initrd location for kdump kernel
s390/pci: Fix s390_mmio_read/write with MIO
The kbuild test robot reported the following warning:
arch/sparc/mm/srmmu.c: In function 'srmmu_nocache_init': arch/sparc/mm/srmmu.c:300:9: error: variable 'pud' set but not used [-Werror=unused-but-set-variable]
300 | pud_t *pud;
This warning is caused by misprint in the page table traversal in
srmmu_nocache_init() function which accessed a PMD entry using PGD
rather than PUD.
Since sparc32 has only 3 page table levels, the PGD and PUD are
essentially the same and usage of __nocache_fix() removed the type
checking.
Use PUD for the consistency and to silence the compiler warning.
Fixes: 7235db268a ("sparc32: use pgtable-nopud instead of 4level-fixup")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200520132005.GM1059226@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes:
- Another !MMU build fix that was a straggler from last week
- A fix to use the "register" keyword for the GP global register
variable"
* tag 'riscv-for-linus-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: gp_in_global needs register keyword
riscv: Fix print_vm_layout build error if NOMMU
Pull EFI fixes from Ard Biesheuvel:
"- fix EFI framebuffer earlycon for wide fonts
- avoid filling screen_info with garbage if the EFI framebuffer is not
available
- fix a potential host tool build error due to a symbol clash on x86
- work around a EFI firmware bug regarding the binary format of the TPM
final events table
- fix a missing memory free by reworking the E820 table sizing routine to
not do the allocation in the first place
- add CPER parsing for firmware errors"
Normally, show_trace_log_lvl() scans the stack, looking for text
addresses to print. In parallel, it unwinds the stack with
unwind_next_frame(). If the stack address matches the pointer returned
by unwind_get_return_address_ptr() for the current frame, the text
address is printed normally without a question mark. Otherwise it's
considered a breadcrumb (potentially from a previous call path) and it's
printed with a question mark to indicate that the address is unreliable
and typically can be ignored.
Since the following commit:
f1d9a2abff ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
... for inactive tasks, show_trace_log_lvl() prints *only* unreliable
addresses (prepended with '?').
That happens because, for the first frame of an inactive task,
unwind_get_return_address_ptr() returns the wrong return address
pointer: one word *below* the task stack pointer. show_trace_log_lvl()
starts scanning at the stack pointer itself, so it never finds the first
'reliable' address, causing only guesses to being printed.
The first frame of an inactive task isn't a normal stack frame. It's
actually just an instance of 'struct inactive_task_frame' which is left
behind by __switch_to_asm(). Now that this inactive frame is actually
exposed to callers, fix unwind_get_return_address_ptr() to interpret it
properly.
Fixes: f1d9a2abff ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble
Pull arm64 fixes from Catalin Marinas:
- Bring the PTRACE_SYSEMU semantics in line with the man page.
- Annotate variable assignment in get_user() with the type to avoid
sparse warnings.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add get_user() type annotation on the !access_ok() path
arm64: Fix PTRACE_SYSEMU semantics
Pull powerpc fixes from Michael Ellerman:
- a revert of a recent change to the PTE bits for 32-bit BookS, which
broke swap.
- a "fix" to disable STRICT_KERNEL_RWX for 64-bit in Kconfig, as it's
causing crashes for some people.
Thanks to Christophe Leroy and Rui Salvaterra.
* tag 'powerpc-5.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable STRICT_KERNEL_RWX
Revert "powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits."
The Intel kernel build robot recently pointed out that I missed the
register keyword on this one when I refactored the code to remove local
register variables (which aren't supported by LLVM). GCC's manual
indicates that global register variables must have the register keyword,
As far as I can tell lacking the register keyword causes GCC to ignore
the __asm__ and treat this as a regular variable, but I'm not sure how
that didn't show up as some sort of failure.
Fixes: 52e7c52d2d ("RISC-V: Stop relying on GCC's register allocator's hueristics")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au
arch/riscv/mm/init.c: In function ‘print_vm_layout’:
arch/riscv/mm/init.c:68:37: error: ‘FIXADDR_START’ undeclared (first use in this function);
arch/riscv/mm/init.c:69:20: error: ‘FIXADDR_TOP’ undeclared
arch/riscv/mm/init.c:70:37: error: ‘PCI_IO_START’ undeclared
arch/riscv/mm/init.c:71:20: error: ‘PCI_IO_END’ undeclared
arch/riscv/mm/init.c:72:38: error: ‘VMEMMAP_START’ undeclared
arch/riscv/mm/init.c:73:20: error: ‘VMEMMAP_END’ undeclared (first use in this function);
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Pull UML fixes from Richard Weinberger:
- Two missing includes which caused build issues on recent systems
- Correctly set TRANS_GRE_LEN in our vector network driver
* tag 'for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix typo in vector driver transport option definition
um: syscall.c: include <asm/unistd.h>
um: Fix xor.h include
Quoth the man page:
```
If the tracee was restarted by PTRACE_SYSCALL or PTRACE_SYSEMU, the
tracee enters syscall-enter-stop just prior to entering any system
call (which will not be executed if the restart was using
PTRACE_SYSEMU, regardless of any change made to registers at this
point or how the tracee is restarted after this stop).
```
The parenthetical comment is currently true on x86 and powerpc,
but not currently true on arm64. arm64 re-checks the _TIF_SYSCALL_EMU
flag after the syscall entry ptrace stop. However, at this point,
it reflects which method was used to re-start the syscall
at the entry stop, rather than the method that was used to reach it.
Fix that by recording the original flag before performing the ptrace
stop, bringing the behavior in line with documentation and x86/powerpc.
Fixes: f086f67485 ("arm64: ptrace: add support for syscall emulation")
Cc: <stable@vger.kernel.org> # 5.3.x-
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Bin Lu <Bin.Lu@arm.com>
[catalin.marinas@arm.com: moved 'flags' bit masking]
[catalin.marinas@arm.com: changed 'flags' type to unsigned long]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With certain kernel configurations, the R_390_JMP_SLOT relocation type
might be generated, which is not expected by the KASLR relocation code,
and the kernel stops with the message "Unknown relocation type".
This was found with a zfcpdump kernel config, where CONFIG_MODULES=n
and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined
__weak symbols in virt/kvm/vfio.c, which results in the generation
of R_390_JMP_SLOT relocation types.
Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT.
Fixes: 805bc0bc23 ("s390/kernel: build a relocatable kernel")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On s390, the layout of normal and large ptes (i.e. pmds/puds) differs.
Therefore, set_huge_pte_at() does a conversion from a normal pte to
the corresponding large pmd/pud. So, when converting an empty pte, this
should result in an empty pmd/pud, which would return true for
pmd/pud_none().
However, after conversion we also mark the pmd/pud as large, and
therefore present. For empty ptes, this will result in an empty pmd/pud
that is also marked as large, and pmd/pud_none() would not return true.
There is currently no issue with this behaviour, as set_huge_pte_at()
does not seem to be called for empty ptes. It would be valid though, so
let's fix this by not marking empty ptes as large in set_huge_pte_at().
This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add more arch page table helper
tests").
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull ARC fixes from Vineet Gupta:
- fix recent DSP code regression on ARC700 platforms
- fix thinkos in ICCM/DCCM size checks
- USB regression fix
- other small fixes here and there
* tag 'arc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: show_regs: avoid extra line of output
ARC: guard dsp early init against non ARCv2
ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT
ARC: entry: comment
arc: remove #ifndef CONFIG_AS_CFI_SIGNAL_FRAME
arc: ptrace: hard-code "arc" instead of UTS_MACHINE
ARC: [plat-hsdk]: fix USB regression
ARC: Fix ICCM & DCCM runtime size checks
Pull hyperv fix from Wei Liu:
"One patch from Vitaly to fix reenlightenment notifications"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Properly suspend/resume reenlightenment notifications
When building with Clang + -Wtautological-compare and
CONFIG_CPUMASK_OFFSTACK unset:
arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus'
equal to a null pointer is always false [-Wtautological-pointer-compare]
if (downed_cpus == NULL &&
^~~~~~~~~~~ ~~~~
arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus'
equal to a null pointer is always false [-Wtautological-pointer-compare]
if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
^~~~~~~~~~~ ~~~~
2 warnings generated.
Commit
f7e30f01a9 ("cpumask: Add helper cpumask_available()")
added cpumask_available() to fix warnings of this nature. Use that here
so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's
value.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/982
Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.com
Pull x86 stack unwinding fix from Thomas Gleixner:
"A single bugfix for the ORC unwinder to ensure that the error flag
which tells the unwinding code whether a stack trace can be trusted or
not is always set correctly.
This was messed up by a couple of changes in the recent past"
* tag 'objtool-urgent-2020-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix error handling in __unwind_start()
Pull x86 fix from Borislav Petkov:
"A single fix for early boot crashes of kernels built with gcc10 and
stack protector enabled"
* tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix early boot crash on gcc-10, third try
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
Pull powerpc fixes from Michael Ellerman:
- A fix for unrecoverable SLB faults in the interrupt exit path,
introduced by the recent rewrite of interrupt exit in C.
- Four fixes for our KUAP (Kernel Userspace Access Prevention) support
on 64-bit. These are all fairly minor with the exception of the
change to evaluate the get/put_user() arguments before we enable user
access, which reduces the amount of code we run with user access
enabled.
- A fix for our secure boot IMA rules, if enforcement of module
signatures is enabled at runtime rather than build time.
- A fix to our 32-bit VDSO clock_getres() which wasn't falling back to
the syscall for unknown clocks.
- A build fix for CONFIG_PPC_KUAP_DEBUG on 32-bit BookS, and another
for 40x.
Thanks to: Christophe Leroy, Hugh Dickins, Nicholas Piggin, Aurelien
Jarno, Mimi Zohar, Nayna Jain.
* tag 'powerpc-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/40x: Make more space for system call exception
powerpc/vdso32: Fallback on getres syscall when clock is unknown
powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/ima: Fix secure boot rules in ima arch policy
powerpc/64s/kuap: Restore AMR in fast_interrupt_return
powerpc/64s/kuap: Restore AMR in system reset exception
powerpc/64/kuap: Move kuap checks out of MSR[RI]=0 regions of exit code
powerpc/64s: Fix unrecoverable SLB crashes due to preemption check
powerpc/uaccess: Evaluate macro arguments once, before user access is allowed
Pull ARM SoC/dt fixes from Arnd Bergmann:
"This round of fixes is almost exclusively device tree changes, with
trivial defconfig fixes and one compiler warning fix added in.
A number of patches are to fix dtc warnings, in particular on Amlogic,
i.MX and Rockchips.
Other notable changes include:
Renesas:
- Fix a wrong clock configuration on R-Mobile A1
- Fix IOMMU support on R-Car V3H
Allwinner
- Multiple audio fixes
Qualcomm
- Use a safe CPU voltage on MSM8996
- Fixes to match a late audio driver change
Rockchip:
- Some fixes for the newly added Pinebook Pro
NXP i.MX:
- Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board
- Fix imx6dl-yapp4-ursa board Ethernet connection
OMAP:
- A regression fix for non-existing can device on am534x-idk
- Fix flakey wlan on droid4 where some devices would not connect at
all because of internal pull being used with an external pull
- Fix occasional missed wake-up events on droid4 modem uart"
* tag 'arm-soc-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39
ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
arm64: defconfig: add MEDIA_PLATFORM_SUPPORT
arm64: defconfig: ARCH_R8A7795: follow changed config symbol name
arm64: defconfig: add DRM_DISPLAY_CONNECTOR
arm64: defconfig: DRM_DUMB_VGA_DAC: follow changed config symbol name
ARM: oxnas: make ox820_boot_secondary static
ARM: dts: r8a7740: Add missing extal2 to CPG node
ARM: dts: omap4-droid4: Fix occasional lost wakeirq for uart1
ARM: dts: omap4-droid4: Fix flakey wlan by disabling internal pull for gpio
arm64: dts: allwinner: a64: Remove unused SPDIF sound card
arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply name
arm64: dts: meson-g12: remove spurious blank line
arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property
arm64: dts: meson-g12-common: fix dwc2 clock names
arm64: dts: meson-g12b-ugoos-am6: fix usb vbus-supply
arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM
ARM: dts: r7s9210: Remove bogus clock-names from OSTM nodes
ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi
...
Renesas fixes for v5.7 (take two)
- Fix a wrong clock configuration on R-Mobile A1,
- Minor fixes that are fast-tracked to avoid introducing regressions
during conversion of DT bindings to json-schema.
* tag 'renesas-fixes-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39
ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
ARM: dts: r8a7740: Add missing extal2 to CPG node
Link: https://lore.kernel.org/r/20200515125043.22811-1-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two fixes for the Allwinner SoCs, one to remove some inexistant sound card on
the A64, and one to fix the audio codec regulator on the pinetab.
* tag 'sunxi-fixes-for-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Remove unused SPDIF sound card
arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply name
Link: https://lore.kernel.org/r/f7a98a47-316d-4b1a-b5a5-0e1e330d5f52.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of build fixes, all found by Huawei's autobuilder.
None of these patches should have any functional impact on kernels
that build, and they're mostly related to various features
intermingling with !MMU.
While some of these might be better hoisted to generic code, it seems
better to have the simple fixes in the meanwhile.
As far as I know these are the only outstanding patches for 5.7"
* tag 'riscv-for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: mmiowb: Fix implicit declaration of function 'smp_processor_id'
riscv: pgtable: Fix __kernel_map_pages build error if NOMMU
riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMU
riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMU
riscv: Add pgprot_writecombine/device and PAGE_SHARED defination if NOMMU
riscv: stacktrace: Fix undefined reference to `walk_stackframe'
riscv: Fix unmet direct dependencies built based on SOC_VIRT
riscv: perf: RISCV_BASE_PMU should be independent
riscv: perf_event: Make some funciton static
Pull arm64 fix from Catalin Marinas:
"Fix flush_icache_range() second argument in machine_kexec() to be an
address rather than size"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix the flush_icache_range arguments in machine_kexec
Given the legacy bpf_probe_read{,str}() BPF helpers are broken on archs
with overlapping address ranges, we should really take the next step to
disable them from BPF use there.
To generally fix the situation, we've recently added new helper variants
bpf_probe_read_{user,kernel}() and bpf_probe_read_{user,kernel}_str().
For details on them, see 6ae08ae3de ("bpf: Add probe_read_{user, kernel}
and probe_read_{user,kernel}_str helpers").
Given bpf_probe_read{,str}() have been around for ~5 years by now, there
are plenty of users at least on x86 still relying on them today, so we
cannot remove them entirely w/o breaking the BPF tracing ecosystem.
However, their use should be restricted to archs with non-overlapping
address ranges where they are working in their current form. Therefore,
move this behind a CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE and
have x86, arm64, arm select it (other archs supporting it can follow-up
on it as well).
For the remaining archs, they can workaround easily by relying on the
feature probe from bpftool which spills out defines that can be used out
of BPF C code to implement the drop-in replacement for old/new kernels
via: bpftool feature probe macro
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20200515101118.6508-2-daniel@iogearbox.net
... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.
The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:
Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
Call Trace:
dump_stack
panic
? start_secondary
__stack_chk_fail
start_secondary
secondary_startup_64
-—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary
This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.
To fix that, the initial attempt was to mark the one function which
generates the stack canary with:
__attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)
however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.
The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.
The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").
This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.
That should hold for a long time, but hey we said that about the other
two solutions too so...
Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org
Small fixes to make these DTs compliant with the adi,adv7511w and
adi,adv7513 bindings:
r8a7745-iwg22d-sodimm-dbhd-ca.dts
r8a7790-lager.dts
r8a7790-stout.dts
r8a7791-koelsch.dts
r8a7791-porter.dts
r8a7792-blanche.dts
r8a7793-gose.dts
r8a7794-silk.dts:
Remove the adi,input-style and adi,input-justification properties.
r8a7792-wheat.dts:
Reorder the I2C slave addresses of hdmi@3d and hdmi@39 and remove
the adi,input-style and adi,input-justification properties.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200511110611.3142-3-ricardo.canuelo@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Small fixes to make these DTs compliant with the adi,adv7511w binding.
r8a77970-eagle.dts,
r8a77970-v3msk.dts,
r8a77980-condor.dts,
r8a77980-v3hsk.dts,
r8a77990-ebisu.dts:
Remove the adi,input-style and adi,input-justification properties.
r8a77995-draak.dts:
Reorder the I2C slave addresses of the hdmi-encoder@39 node and
remove the adi,input-style and adi,input-justification properties.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200511110611.3142-2-ricardo.canuelo@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The unwind_state 'error' field is used to inform the reliable unwinding
code that the stack trace can't be trusted. Set this field for all
errors in __unwind_start().
Also, move the zeroing out of the unwind_state struct to before the ORC
table initialization check, to prevent the caller from reading
uninitialized data if the ORC table is corrupted.
Fixes: af085d9084 ("stacktrace/x86: add function for detecting reliable stack traces")
Fixes: d3a0910401 ("x86/unwinder/orc: Dont bail on stack overflow")
Fixes: 98d0c8ebf7 ("x86/unwind/orc: Prevent unwinding before ORC initialization")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com
The s390_mmio_read/write syscalls are currently broken when running with
MIO.
The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed
similiarly to normal load/store instructions and do address translation
in the current address space. That means inside the kernel they are
aware of mappings into kernel address space while outside the kernel
they use user space mappings (usually created through mmap'ing a PCI
device file).
Now when existing user space applications use the s390_pci_mmio_write
and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped
into user space so as to be usable with the new instructions without
needing a syscall. Accessing these addresses with the old instructions
as done currently leads to a kernel panic.
Also, for such a user space mapping there may not exist an equivalent
kernel space mapping which means we can't just use the new instructions
in kernel space.
Instead of replicating user mappings in the kernel which then might
collide with other mappings, we can conceptually execute the new
instructions as if executed by the user space application using the
secondary address space. This even allows us to directly store to the
user pointer without the need for copy_to/from_user().
Cc: stable@vger.kernel.org
Fixes: 71ba41c9b1 ("s390/pci: provide support for MIO instructions")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull more tracing fixes from Steven Rostedt:
"Various tracing fixes:
- Fix a crash when having function tracing and function stack tracing
on the command line.
The ftrace trampolines are created as executable and read only. But
the stack tracer tries to modify them with text_poke() which
expects all kernel text to still be writable at boot. Keep the
trampolines writable at boot, and convert them to read-only with
the rest of the kernel.
- A selftest was triggering in the ring buffer iterator code, that is
no longer valid with the update of keeping the ring buffer writable
while a iterator is reading.
Just bail after three failed attempts to get an event and remove
the warning and disabling of the ring buffer.
- While modifying the ring buffer code, decided to remove all the
unnecessary BUG() calls"
* tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Remove all BUG() calls
ring-buffer: Don't deactivate the ring buffer on failed iterator reads
x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up
If raw_copy_from_user(to, from, N) returns K, callers expect
the first N - K bytes starting at to to have been replaced with
the contents of corresponding area starting at from and the last
K bytes of destination *left* *unmodified*.
What arch/sky/lib/usercopy.c is doing is broken - it can lead to e.g.
data corruption on write(2).
raw_copy_to_user() is inaccurate about return value, which is a bug,
but consequences are less drastic than for raw_copy_from_user().
And just what are those access_ok() doing in there? I mean, look into
linux/uaccess.h; that's where we do that check (as well as zero tail
on failure in the callers that need zeroing).
AFAICS, all of that shouldn't be hard to fix; something like a patch
below might make a useful starting point.
I would suggest moving these macros into usercopy.c (they are never
used anywhere else) and possibly expanding them there; if you leave
them alive, please at least rename __copy_user_zeroing(). Again,
it must not zero anything on failed read.
Said that, I'm not sure we won't be better off simply turning
usercopy.c into usercopy.S - all that is left there is a couple of
functions, each consisting only of inline asm.
Guo Ren reply:
Yes, raw_copy_from_user is wrong, it's no need zeroing code.
unsigned long _copy_from_user(void *to, const void __user *from,
unsigned long n)
{
unsigned long res = n;
might_fault();
if (likely(access_ok(from, n))) {
kasan_check_write(to, n);
res = raw_copy_from_user(to, from, n);
}
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
}
EXPORT_SYMBOL(_copy_from_user);
You are right and access_ok() should be removed.
but, how about:
do {
...
"2: stw %3, (%1, 0) \n" \
+ " subi %0, 4 \n" \
"9: stw %4, (%1, 4) \n" \
+ " subi %0, 4 \n" \
"10: stw %5, (%1, 8) \n" \
+ " subi %0, 4 \n" \
"11: stw %6, (%1, 12) \n" \
+ " subi %0, 4 \n" \
" addi %2, 16 \n" \
" addi %1, 16 \n" \
Don't expand __ex_table
AI Viro reply:
Hey, I've no idea about the instruction scheduling on csky -
if that doesn't slow the things down, all the better. It's just
that copy_to_user() and friends are on fairly hot codepaths,
and in quite a few situations they will dominate the speed of
e.g. read(2). So I tried to keep the fast path unchanged.
Up to the architecture maintainers, obviously. Which would be
you...
As for the fixups size increase (__ex_table size is unchanged)...
You have each of those macros expanded exactly once.
So the size is not a serious argument, IMO - useless complexity
would be, if it is, in fact, useless; the size... not really,
especially since those extra subi will at least offset it.
Again, up to you - asm optimizations of (essentially)
memcpy()-style loops are tricky and can depend upon the
fairly subtle details of architecture. So even on something
I know reasonably well I would resort to direct experiments
if I can't pass the buck to architecture maintainers.
It *is* worth optimizing - this is where read() from a file
that is already in page cache spends most of the time, etc.
Guo Ren reply:
Thx, after fixup some typo “sub %0, 4”, apply the patch.
TODO:
- user copy/from codes are still need optimizing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The gdbmacros.txt use sp in thread_struct, but csky use ksp. This
cause bttnobp fail to excute.
TODO:
- Still couldn't display the contents of stack.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
