From 5f4696ddca4b8a0bbbc36bd46829f97aab5a4552 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sun, 13 Nov 2022 19:57:47 -0600 Subject: [PATCH 1/4] bus: sunxi-rsb: Remove the shutdown callback Shutting down the RSB controller prevents communicating with a PMIC inside pm_power_off(), since that gets called after device_shutdown(), so it breaks system poweroff on some boards. Reported-by: Ivaylo Dimitrov Tested-by: Ivaylo Dimitrov Acked-by: Jernej Skrabec Fixes: 843107498f91 ("bus: sunxi-rsb: Implement suspend/resume/shutdown callbacks") Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20221114015749.28490-2-samuel@sholland.org Signed-off-by: Jernej Skrabec --- drivers/bus/sunxi-rsb.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index 4cd2e127946e..17343cd75338 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -812,14 +812,6 @@ static int sunxi_rsb_remove(struct platform_device *pdev) return 0; } -static void sunxi_rsb_shutdown(struct platform_device *pdev) -{ - struct sunxi_rsb *rsb = platform_get_drvdata(pdev); - - pm_runtime_disable(&pdev->dev); - sunxi_rsb_hw_exit(rsb); -} - static const struct dev_pm_ops sunxi_rsb_dev_pm_ops = { SET_RUNTIME_PM_OPS(sunxi_rsb_runtime_suspend, sunxi_rsb_runtime_resume, NULL) @@ -835,7 +827,6 @@ MODULE_DEVICE_TABLE(of, sunxi_rsb_of_match_table); static struct platform_driver sunxi_rsb_driver = { .probe = sunxi_rsb_probe, .remove = sunxi_rsb_remove, - .shutdown = sunxi_rsb_shutdown, .driver = { .name = RSB_CTRL_NAME, .of_match_table = sunxi_rsb_of_match_table, From 077686da0e2162c4ea5ae0df205849c2a7a84479 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sun, 13 Nov 2022 19:57:48 -0600 Subject: [PATCH 2/4] bus: sunxi-rsb: Support atomic transfers When communicating with a PMIC during system poweroff (pm_power_off()), IRQs are disabled and we are in a RCU read-side critical section, so we cannot use wait_for_completion_io_timeout(). Instead, poll the status register for transfer completion. Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Signed-off-by: Samuel Holland Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20221114015749.28490-3-samuel@sholland.org Signed-off-by: Jernej Skrabec --- drivers/bus/sunxi-rsb.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index 17343cd75338..3aa91aed3bf7 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -267,6 +267,9 @@ EXPORT_SYMBOL_GPL(sunxi_rsb_driver_register); /* common code that starts a transfer */ static int _sunxi_rsb_run_xfer(struct sunxi_rsb *rsb) { + u32 int_mask, status; + bool timeout; + if (readl(rsb->regs + RSB_CTRL) & RSB_CTRL_START_TRANS) { dev_dbg(rsb->dev, "RSB transfer still in progress\n"); return -EBUSY; @@ -274,13 +277,23 @@ static int _sunxi_rsb_run_xfer(struct sunxi_rsb *rsb) reinit_completion(&rsb->complete); - writel(RSB_INTS_LOAD_BSY | RSB_INTS_TRANS_ERR | RSB_INTS_TRANS_OVER, - rsb->regs + RSB_INTE); + int_mask = RSB_INTS_LOAD_BSY | RSB_INTS_TRANS_ERR | RSB_INTS_TRANS_OVER; + writel(int_mask, rsb->regs + RSB_INTE); writel(RSB_CTRL_START_TRANS | RSB_CTRL_GLOBAL_INT_ENB, rsb->regs + RSB_CTRL); - if (!wait_for_completion_io_timeout(&rsb->complete, - msecs_to_jiffies(100))) { + if (irqs_disabled()) { + timeout = readl_poll_timeout_atomic(rsb->regs + RSB_INTS, + status, (status & int_mask), + 10, 100000); + writel(status, rsb->regs + RSB_INTS); + } else { + timeout = !wait_for_completion_io_timeout(&rsb->complete, + msecs_to_jiffies(100)); + status = rsb->status; + } + + if (timeout) { dev_dbg(rsb->dev, "RSB timeout\n"); /* abort the transfer */ @@ -292,18 +305,18 @@ static int _sunxi_rsb_run_xfer(struct sunxi_rsb *rsb) return -ETIMEDOUT; } - if (rsb->status & RSB_INTS_LOAD_BSY) { + if (status & RSB_INTS_LOAD_BSY) { dev_dbg(rsb->dev, "RSB busy\n"); return -EBUSY; } - if (rsb->status & RSB_INTS_TRANS_ERR) { - if (rsb->status & RSB_INTS_TRANS_ERR_ACK) { + if (status & RSB_INTS_TRANS_ERR) { + if (status & RSB_INTS_TRANS_ERR_ACK) { dev_dbg(rsb->dev, "RSB slave nack\n"); return -EINVAL; } - if (rsb->status & RSB_INTS_TRANS_ERR_DATA) { + if (status & RSB_INTS_TRANS_ERR_DATA) { dev_dbg(rsb->dev, "RSB transfer data error\n"); return -EIO; } From 38f0d57d0a47b2783cac4d78a6141c7abf423532 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 15 Nov 2022 17:06:43 +0800 Subject: [PATCH 3/4] media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property The Hantro G2 video decoder block sits behind an IOMMU. The device tree binding needs a property to reference it. Without a reference for the implementation to properly configure the IOMMU, it will fault and cause the video decoder to fail. Add an "iommus" property for referring to the IOMMU port. The master ID in the example is taken from the IOMMU fault error message on Linux, and the number seems to match the order in the user manual's IOMMU diagram. Fixes: fd6be12716c4 ("media: dt-bindings: allwinner: document H6 Hantro G2 binding") Signed-off-by: Chen-Yu Tsai Acked-by: Jernej Skrabec Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221115090644.3602573-2-wenst@chromium.org Signed-off-by: Jernej Skrabec --- .../bindings/media/allwinner,sun50i-h6-vpu-g2.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml index 24d7bf21499e..9d44236f2deb 100644 --- a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml +++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml @@ -36,6 +36,9 @@ properties: resets: maxItems: 1 + iommus: + maxItems: 1 + required: - compatible - reg @@ -43,6 +46,7 @@ required: - clocks - clock-names - resets + - iommus additionalProperties: false @@ -59,6 +63,7 @@ examples: clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>; clock-names = "bus", "mod"; resets = <&ccu RST_BUS_VP9>; + iommus = <&iommu 5>; }; ... From 50edc257a152541b8bcdc84f77de5e4efad7013d Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 15 Nov 2022 17:06:44 +0800 Subject: [PATCH 4/4] arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2 The Hantro G2 video decoder block sits behind the IOMMU. Without a reference for the system to properly configure the IOMMU, it will fault and cause the video decoder to fail. Add a proper reference to the IOMMU port. The master ID is taken from the IOMMU fault error message on Linux, and the number seems to match the order in the user manual's IOMMU diagram. Fixes: 0baddea60e8d ("arm64: dts: allwinner: h6: Add Hantro G2 node") Signed-off-by: Chen-Yu Tsai Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20221115090644.3602573-3-wenst@chromium.org Signed-off-by: Jernej Skrabec --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 53f6660656ac..ca1d287a0a01 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -161,6 +161,7 @@ video-codec-g2@1c00000 { clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>; clock-names = "bus", "mod"; resets = <&ccu RST_BUS_VP9>; + iommus = <&iommu 5>; }; video-codec@1c0e000 {