From d548c217c6a3cdc6aeb6c8e3457cca2aad5e5738 Mon Sep 17 00:00:00 2001
From: Vabhav Sharma <vabhav.sharma@nxp.com>
Date: Mon, 29 Oct 2018 08:57:54 +0000
Subject: [PATCH 01/12] arm64: dts: add QorIQ LX2160A SoC support

LX2160A SoC is based on Layerscape Chassis Generation 3.2 Architecture.

LX2160A features an advanced 16 64-bit ARM v8 CortexA72 processor cores
in 8 cluster, CCN508, GICv3,two 64-bit DDR4 memory controller, 8 I2C
controllers, 3 dspi, 2 esdhc,2 USB 3.0, mmu 500, 3 SATA, 4 PL011 SBSA
UARTs etc.

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 766 ++++++++++++++++++
 1 file changed, 766 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
new file mode 100644
index 000000000000..a79f5c1ea56d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree Include file for Layerscape-LX2160A family SoC.
+//
+// Copyright 2018 NXP
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	compatible = "fsl,lx2160a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		// 8 clusters having 2 Cortex-A72 cores each
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x0>;
+			clocks = <&clockgen 1 0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x1>;
+			clocks = <&clockgen 1 0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x100>;
+			clocks = <&clockgen 1 1>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x101>;
+			clocks = <&clockgen 1 1>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x200>;
+			clocks = <&clockgen 1 2>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x201>;
+			clocks = <&clockgen 1 2>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x300>;
+			clocks = <&clockgen 1 3>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x301>;
+			clocks = <&clockgen 1 3>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x400>;
+			clocks = <&clockgen 1 4>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster4_l2>;
+		};
+
+		cpu@401 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x401>;
+			clocks = <&clockgen 1 4>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster4_l2>;
+		};
+
+		cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x500>;
+			clocks = <&clockgen 1 5>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster5_l2>;
+		};
+
+		cpu@501 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x501>;
+			clocks = <&clockgen 1 5>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster5_l2>;
+		};
+
+		cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x600>;
+			clocks = <&clockgen 1 6>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster6_l2>;
+		};
+
+		cpu@601 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x601>;
+			clocks = <&clockgen 1 6>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster6_l2>;
+		};
+
+		cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x700>;
+			clocks = <&clockgen 1 7>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster7_l2>;
+		};
+
+		cpu@701 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x701>;
+			clocks = <&clockgen 1 7>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster7_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster4_l2: l2-cache4 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster5_l2: l2-cache5 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster6_l2: l2-cache6 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster7_l2: l2-cache7 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, // GIC Dist
+			<0x0 0x06200000 0 0x200000>, // GICR (RD_base +
+						     // SGI_base)
+			<0x0 0x0c0c0000 0 0x2000>, // GICC
+			<0x0 0x0c0d0000 0 0x1000>, // GICH
+			<0x0 0x0c0e0000 0 0x20000>; // GICV
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its: gic-its@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	memory@80000000 {
+		// DRAM space - 1, size : 2 GB DRAM
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+	};
+
+	// One clock unit-sysclk node which bootloader require during DT fix-up
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>; // fixed up by bootloader
+		clock-output-names = "sysclk";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg        = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg        = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg        = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg        = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		clockgen: clock-controller@1300000 {
+			compatible = "fsl,lx2160a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: syscon@1e00000 {
+			compatible = "fsl,lx2160a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 7>;
+			scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 7>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 7>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 7>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@2040000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2040000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 7>;
+			scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@2050000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2050000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 7>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@2060000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 7>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@2070000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 7>;
+			status = "disabled";
+		};
+
+		esdhc0: esdhc@2140000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clocks = <&clockgen 4 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		esdhc1: esdhc@2150000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x2150000 0x0 0x10000>;
+			interrupts = <0 63 0x4>; /* Level high type */
+			clocks = <&clockgen 4 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			broken-cd;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		uart0: serial@21c0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21c0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart1: serial@21d0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21d0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart2: serial@21e0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21e0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart3: serial@21f0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21f0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog@23a0000 {
+			compatible = "arm,sbsa-gwdt";
+			reg = <0x0 0x23a0000 0 0x1000>,
+			      <0x0 0x2390000 0 0x1000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			timeout-sec = <30>;
+		};
+
+		usb0: usb@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			status = "disabled";
+		};
+
+		usb1: usb@3110000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			status = "disabled";
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <14>;
+				     // global secure fault
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined secure
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     // global non-secure fault
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined non-secure
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     // performance counter interrupts 0-9
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     // per context interrupt, 64 interrupts
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+		};
+	};
+};

From b068890c34dda4c2a7dd87fa0d291020da0e67f3 Mon Sep 17 00:00:00 2001
From: Vabhav Sharma <vabhav.sharma@nxp.com>
Date: Mon, 29 Oct 2018 08:58:01 +0000
Subject: [PATCH 02/12] arm64: dts: add LX2160ARDB board support

LX2160A reference design board (RDB) is a high-performance
computing, evaluation, and development platform with LX2160A
SoC.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/fsl-lx2160a-rdb.dts    | 119 ++++++++++++++++++
 2 files changed, 120 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 86e18adb695a..445b72bd5a36 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
new file mode 100644
index 000000000000..6481e5f20e69
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160ARDB
+//
+// Copyright 2018 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160ARDB";
+	compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MC34717-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			temperature-sensor@4d {
+				compatible = "nxp,sa56004";
+				reg = <0x4d>;
+				vcc-supply = <&sb_3v3>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		// IRQ10_B
+		interrupts = <0 150 0x4>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

From fa86cfe89748abb8558d24c2d16203d1cb02a5a1 Mon Sep 17 00:00:00 2001
From: Pankaj Bansal <pankaj.bansal@nxp.com>
Date: Wed, 17 Oct 2018 10:32:45 +0000
Subject: [PATCH 03/12] arm64: dts: add LX2160AQDS board support

The LX2160A QorIQ Development System (QDS) is a test, evaluation, and
development platform, supporting QorIQ LX2160A processor.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/fsl-lx2160a-qds.dts    | 112 ++++++++++++++++++
 2 files changed, 113 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 445b72bd5a36..46b1479b7a6b 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -13,4 +13,5 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
new file mode 100644
index 000000000000..99a22abbe725
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160AQDS
+//
+// Copyright 2018 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS";
+	compatible = "fsl,lx2160a-qds", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MC34717-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			temperature-sensor@4d {
+				compatible = "nxp,sa56004";
+				reg = <0x4d>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

From 26a06c6e290e0a577d82f1dd3ecdee4a838aee80 Mon Sep 17 00:00:00 2001
From: Pramod Kumar <pramod.kumar_1@nxp.com>
Date: Tue, 16 Oct 2018 07:40:29 +0000
Subject: [PATCH 04/12] arm64: dts: ls1012a: Add FRWY-LS1012A board support

LS1012A-FRWY is an ls1012a based SoC board.
Key features of this board are  Micro SD, USB 3.0,
upto 1GB DDR, UART

Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../boot/dts/freescale/fsl-ls1012a-frwy.dts   | 25 +++++++++++++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 46b1479b7a6b..9a88530c5f38 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
new file mode 100644
index 000000000000..8749634c55ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A FRWY Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * Pramod Kumar <pramod.kumar_1@nxp.com>
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A FRWY Board";
+	compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};

From aa2aa88847154010157aa5957951ae826118d28c Mon Sep 17 00:00:00 2001
From: Bao Xiaowei <xiaowei.bao@nxp.com>
Date: Mon, 5 Nov 2018 16:46:48 +0800
Subject: [PATCH 05/12] arm64: dts: fsl: Add the status property disable PCIe

Add the status property disable the PCIe, the property will be enable
by bootloader.

Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 +
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 +++
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 3 +++
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++++
 5 files changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 5da732f82fa0..21f2b3ba6b58 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -496,6 +496,7 @@ pcie@3400000 {
 					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3fed504b5381..760d510d78de 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -683,6 +683,7 @@ pcie@3400000 {
 					<0000 0 0 2 &gic 0 111 0x4>,
 					<0000 0 0 3 &gic 0 112 0x4>,
 					<0000 0 0 4 &gic 0 113 0x4>;
+			status = "disabled";
 		};
 
 		pcie@3500000 {
@@ -708,6 +709,7 @@ pcie@3500000 {
 					<0000 0 0 2 &gic 0 121 0x4>,
 					<0000 0 0 3 &gic 0 122 0x4>,
 					<0000 0 0 4 &gic 0 123 0x4>;
+			status = "disabled";
 		};
 
 		pcie@3600000 {
@@ -733,6 +735,7 @@ pcie@3600000 {
 					<0000 0 0 2 &gic 0 155 0x4>,
 					<0000 0 0 3 &gic 0 156 0x4>,
 					<0000 0 0 4 &gic 0 157 0x4>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 51cbd50012d6..64d334c6b0b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -652,6 +652,7 @@ pcie@3400000 {
 					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		pcie@3500000 {
@@ -677,6 +678,7 @@ pcie@3500000 {
 					<0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		pcie@3600000 {
@@ -702,6 +704,7 @@ pcie@3600000 {
 					<0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index a07f612ab56b..9deb9cb83046 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -533,6 +533,7 @@ pcie@3400000 {
 					<0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		pcie@3500000 {
@@ -557,6 +558,7 @@ pcie@3500000 {
 					<0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		pcie@3600000 {
@@ -581,6 +583,7 @@ pcie@3600000 {
 					<0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index d188774a36e8..5732e3b48be7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -648,6 +648,7 @@ pcie1: pcie@3400000 {
 					<0000 0 0 2 &gic 0 0 0 110 4>,
 					<0000 0 0 3 &gic 0 0 0 111 4>,
 					<0000 0 0 4 &gic 0 0 0 112 4>;
+			status = "disabled";
 		};
 
 		pcie2: pcie@3500000 {
@@ -669,6 +670,7 @@ pcie2: pcie@3500000 {
 					<0000 0 0 2 &gic 0 0 0 115 4>,
 					<0000 0 0 3 &gic 0 0 0 116 4>,
 					<0000 0 0 4 &gic 0 0 0 117 4>;
+			status = "disabled";
 		};
 
 		pcie3: pcie@3600000 {
@@ -690,6 +692,7 @@ pcie3: pcie@3600000 {
 					<0000 0 0 2 &gic 0 0 0 120 4>,
 					<0000 0 0 3 &gic 0 0 0 121 4>,
 					<0000 0 0 4 &gic 0 0 0 122 4>;
+			status = "disabled";
 		};
 
 		pcie4: pcie@3700000 {
@@ -711,6 +714,7 @@ pcie4: pcie@3700000 {
 					<0000 0 0 2 &gic 0 0 0 125 4>,
 					<0000 0 0 3 &gic 0 0 0 126 4>,
 					<0000 0 0 4 &gic 0 0 0 127 4>;
+			status = "disabled";
 		};
 
 		sata0: sata@3200000 {

From 1fa35bc09d48de9dbbadf11e667adced9e461131 Mon Sep 17 00:00:00 2001
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Date: Wed, 7 Nov 2018 05:35:32 +0000
Subject: [PATCH 06/12] arm64: dts: layerscape: removed compatible string
 "snps,dw-pcie"

Removed the wrong compatible string "snps,dw-pcie", in case
match incorrect driver.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi |  2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi |  6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi |  6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi |  6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi |  8 ++++----
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 12 ++++--------
 6 files changed, 18 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 21f2b3ba6b58..816f3a4537e3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -475,7 +475,7 @@ msi: msi-controller1@1572000 {
 		};
 
 		pcie@3400000 {
-			compatible = "fsl,ls1012a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1012a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 760d510d78de..3364a7fe18e0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -661,7 +661,7 @@ msi3: msi-controller3@1573000 {
 		};
 
 		pcie@3400000 {
-			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1043a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
@@ -687,7 +687,7 @@ pcie@3400000 {
 		};
 
 		pcie@3500000 {
-			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1043a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
 			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
@@ -713,7 +713,7 @@ pcie@3500000 {
 		};
 
 		pcie@3600000 {
-			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1043a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
 			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 64d334c6b0b4..54a3827788ba 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -630,7 +630,7 @@ msi3: msi-controller@15a0000 {
 		};
 
 		pcie@3400000 {
-			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1046a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
@@ -656,7 +656,7 @@ pcie@3400000 {
 		};
 
 		pcie@3500000 {
-			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1046a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
 			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
@@ -682,7 +682,7 @@ pcie@3500000 {
 		};
 
 		pcie@3600000 {
-			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1046a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
 			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 9deb9cb83046..b8b710015e15 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -512,7 +512,7 @@ sec_jr3: jr@40000 {
 		};
 
 		pcie@3400000 {
-			compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1088a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
 			       0x20 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
@@ -537,7 +537,7 @@ pcie@3400000 {
 		};
 
 		pcie@3500000 {
-			compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1088a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
 			       0x28 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
@@ -562,7 +562,7 @@ pcie@3500000 {
 		};
 
 		pcie@3600000 {
-			compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+			compatible = "fsl,ls1088a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
 			       0x30 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 7c882da3f6b0..a5f668d786b8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -119,7 +119,7 @@ CPU_PW20: cpu-pw20 {
 };
 
 &pcie1 {
-	compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+	compatible = "fsl,ls2088a-pcie";
 	reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
 	       0x20 0x00000000 0x0 0x00002000>; /* configuration space */
 
@@ -128,7 +128,7 @@ &pcie1 {
 };
 
 &pcie2 {
-	compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+	compatible = "fsl,ls2088a-pcie";
 	reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
 	       0x28 0x00000000 0x0 0x00002000>; /* configuration space */
 
@@ -137,7 +137,7 @@ &pcie2 {
 };
 
 &pcie3 {
-	compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+	compatible = "fsl,ls2088a-pcie";
 	reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
 	       0x30 0x00000000 0x0 0x00002000>; /* configuration space */
 
@@ -146,7 +146,7 @@ &pcie3 {
 };
 
 &pcie4 {
-	compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+	compatible = "fsl,ls2088a-pcie";
 	reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
 	       0x38 0x00000000 0x0 0x00002000>; /* configuration space */
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 5732e3b48be7..f3591966c347 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -630,8 +630,7 @@ qspi: spi@20c0000 {
 		};
 
 		pcie1: pcie@3400000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
-				     "snps,dw-pcie";
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
 			interrupts = <0 108 0x4>; /* Level high type */
 			interrupt-names = "intr";
@@ -652,8 +651,7 @@ pcie1: pcie@3400000 {
 		};
 
 		pcie2: pcie@3500000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
-				     "snps,dw-pcie";
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
 			interrupts = <0 113 0x4>; /* Level high type */
 			interrupt-names = "intr";
@@ -674,8 +672,7 @@ pcie2: pcie@3500000 {
 		};
 
 		pcie3: pcie@3600000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
-				     "snps,dw-pcie";
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
 			interrupts = <0 118 0x4>; /* Level high type */
 			interrupt-names = "intr";
@@ -696,8 +693,7 @@ pcie3: pcie@3600000 {
 		};
 
 		pcie4: pcie@3700000 {
-			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
-				     "snps,dw-pcie";
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
 			reg-names = "regs", "config";
 			interrupts = <0 123 0x4>; /* Level high type */
 			interrupt-names = "intr";

From 8897f3255c9c411b86482e09ccbc3e75a8a201e7 Mon Sep 17 00:00:00 2001
From: Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
Date: Wed, 14 Nov 2018 05:30:52 +0000
Subject: [PATCH 07/12] arm64: dts: Add support for NXP LS1028A SoC

LS1028A contains two ARM v8 CortexA72 processor cores
with 32 KB L1-D cache and 48 KB L1-I cache

Features summary
 Two 32-bit / 64-bit ARM v8 Cortex-A72 CPUs
  - Arranged as single clusters of two cores sharing a 1 MB L2 cache
  - Speed Up to 1.3 GHz
  - Support for cluster power-gating.
 Cache coherent interconnect (CCI-400)
  - Hardware-managed data coherency
  - Up to 400 MHz
 32-bit DDR4 SDRAM memory controller with ECC
 Two PCIe 3.0 controllers
 One serial ATA (SATA 3.0) controller
 Two high-speed USB 3.0 controllers with integrated PHY

 Following levels of DTSI/DTS files have been created for the LS1028A
  SoC family:

         - fsl-ls1028a.dtsi:
                 DTS-Include file for NXP LS1028A SoC.

         - fsl-ls1028a-qds.dts:
                 DTS file for NXP LS1028A QDS board.

         - fsl-ls1028a-rdb.dts:
                 DTS file for NXP LS1028A RDB board

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |   2 +
 .../boot/dts/freescale/fsl-ls1028a-qds.dts    |  93 +++++
 .../boot/dts/freescale/fsl-ls1028a-rdb.dts    |  73 ++++
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 339 ++++++++++++++++++
 4 files changed, 507 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 9a88530c5f38..7748e6dfc3c9 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -3,6 +3,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
new file mode 100644
index 000000000000..14c79f4691ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1028A QDS Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "LS1028A QDS Board";
+	compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x00000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9847";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			current-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			current-monitor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
new file mode 100644
index 000000000000..fdeb4176fc33
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1028A RDB Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "LS1028A RDB Board";
+	compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9847";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			current-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
new file mode 100644
index 000000000000..a8cf92af05fb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1028A family SoC.
+ *
+ * Copyright 2018 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1028a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			enable-method = "psci";
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "arm,psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x00010000>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	sysclk: clock-sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible= "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
+		#interrupt-cells= <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+					 IRQ_TYPE_LEVEL_LOW)>;
+		its: gic-its@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+
+		dcfg: syscon@1e00000 {
+			compatible = "fsl,ls1028a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			big-endian;
+		};
+
+		scfg: syscon@1fc0000 {
+			compatible = "fsl,ls1028a-scfg", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clock-controller@1300000 {
+			compatible = "fsl,ls1028a-clockgen";
+			reg = <0x0 0x1300000 0x0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@2040000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2040000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@2050000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2050000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@2060000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@2070000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wdog0: watchdog@23c0000 {
+			compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt";
+			reg = <0x0 0x23c0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1028a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#global-interrupts = <8>;
+			#iommu-cells = <1>;
+			stream-match-mask = <0x7c00>;
+			/* global secure fault */
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			/* combined secure interrupt */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			/* global non-secure fault */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			/* combined non-secure interrupt */
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			/* performance counter interrupts 0-7 */
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+			/* per context interrupt, 64 interrupts */
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};

From c9a1f24304cbf6d576a0e0c379ae85e7329cd0ba Mon Sep 17 00:00:00 2001
From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Fri, 16 Nov 2018 15:34:26 +0530
Subject: [PATCH 08/12] arm64: dts: fsl: Add all CPUs in cooling maps

Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.

Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.

Update cooling maps to include all devices affected by individual trip
points.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi |  6 ++--
 .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi |  6 ++--
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 17 ++++++-----
 .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 28 ++++++-------------
 4 files changed, 24 insertions(+), 33 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3364a7fe18e0..712cc27755cc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -171,8 +171,10 @@ cooling-maps {
 				map0 {
 					trip = <&cpu_alert>;
 					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 54a3827788ba..8cfc84826023 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -140,8 +140,10 @@ cooling-maps {
 				map0 {
 					trip = <&cpu_alert>;
 					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index b8b710015e15..42a935bac07d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -152,15 +152,14 @@ cooling-maps {
 				map0 {
 					trip = <&cpu_alert>;
 					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-
-				map1 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu4 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f3591966c347..6d6ca166f86b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -101,26 +101,14 @@ cooling-maps {
 				map0 {
 					trip = <&cpu_alert>;
 					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu2 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-				map2 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu4 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
-				};
-				map3 {
-					trip = <&cpu_alert>;
-					cooling-device =
-						<&cpu6 THERMAL_NO_LIMIT
-						THERMAL_NO_LIMIT>;
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};

From a2468676cc826be36d8f2ab3d593eea80f639c44 Mon Sep 17 00:00:00 2001
From: Ioana Ciocoi Radulescu <ruxandra.radulescu@nxp.com>
Date: Tue, 4 Dec 2018 16:33:06 +0000
Subject: [PATCH 09/12] arm64: dts: ls1088a: Move fsl-mc node

The fsl-mc node should sit under the soc node, so move it to
its proper location.

Fixes: ac7c9ff741fb ("arm64: dts: ls1088a: add fsl-mc hardware resource manager node")
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 142 +++++++++---------
 1 file changed, 71 insertions(+), 71 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 42a935bac07d..f3ab53bb6f20 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -173,77 +173,6 @@ timer {
 			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
-	fsl_mc: fsl-mc@80c000000 {
-		compatible = "fsl,qoriq-mc";
-		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
-		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-		msi-parent = <&its>;
-		#address-cells = <3>;
-		#size-cells = <1>;
-
-		/*
-		 * Region type 0x0 - MC portals
-		 * Region type 0x1 - QBMAN portals
-		 */
-		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
-			  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
-
-		dpmacs {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dpmac1: dpmac@1 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <1>;
-			};
-
-			dpmac2: dpmac@2 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <2>;
-			};
-
-			dpmac3: dpmac@3 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <3>;
-			};
-
-			dpmac4: dpmac@4 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <4>;
-			};
-
-			dpmac5: dpmac@5 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <5>;
-			};
-
-			dpmac6: dpmac@6 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <6>;
-			};
-
-			dpmac7: dpmac@7 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <7>;
-			};
-
-			dpmac8: dpmac@8 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <8>;
-			};
-
-			dpmac9: dpmac@9 {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <9>;
-			};
-
-			dpmac10: dpmac@a {
-				compatible = "fsl,qoriq-mc-dpmac";
-				reg = <0xa>;
-			};
-		};
-	};
-
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -640,6 +569,77 @@ cluster2_core3_watchdog: wdt@c130000 {
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "apb_pclk", "wdog_clk";
 		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+			msi-parent = <&its>;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: dpmac@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <1>;
+				};
+
+				dpmac2: dpmac@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <2>;
+				};
+
+				dpmac3: dpmac@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <3>;
+				};
+
+				dpmac4: dpmac@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <4>;
+				};
+
+				dpmac5: dpmac@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <5>;
+				};
+
+				dpmac6: dpmac@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <6>;
+				};
+
+				dpmac7: dpmac@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <7>;
+				};
+
+				dpmac8: dpmac@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <8>;
+				};
+
+				dpmac9: dpmac@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <9>;
+				};
+
+				dpmac10: dpmac@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+				};
+			};
+		};
 	};
 
 	firmware {

From d9a71ef086e89e411ca508a69361b38beb0aafdf Mon Sep 17 00:00:00 2001
From: Ioana Ciocoi Radulescu <ruxandra.radulescu@nxp.com>
Date: Tue, 4 Dec 2018 16:33:07 +0000
Subject: [PATCH 10/12] arm64: dts: ls1088a: Add missing dma-ranges property

LS1088A has a 48-bit address size so make sure that the
dma-ranges property reflects this.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index f3ab53bb6f20..de93b42b1f51 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -190,6 +190,7 @@ soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
 
 		clockgen: clocking@1300000 {
 			compatible = "fsl,ls1088a-clockgen";

From 29813f669d89a1a9ae2e3e2d2cf55e12ed54853f Mon Sep 17 00:00:00 2001
From: Peng Ma <peng.ma@nxp.com>
Date: Thu, 6 Dec 2018 19:18:22 +0800
Subject: [PATCH 11/12] arm64: dts: ls1043a: add qdma device tree nodes

add the qDMA device tree nodes for LS1043A devices.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 712cc27755cc..70057b4e46e8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -739,6 +739,28 @@ pcie@3600000 {
 					<0000 0 0 4 &gic 0 157 0x4>;
 			status = "disabled";
 		};
+
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
 	};
 
 	firmware {

From 58f5fa68372505c8c6e57754a370f0e7e6004513 Mon Sep 17 00:00:00 2001
From: Peng Ma <peng.ma@nxp.com>
Date: Thu, 6 Dec 2018 19:18:23 +0800
Subject: [PATCH 12/12] arm64: dts: ls1046a: add qdma device tree nodes

add the qDMA device tree nodes for LS1046A devices.

Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 8cfc84826023..9a2106e60e19 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -709,6 +709,27 @@ pcie@3600000 {
 			status = "disabled";
 		};
 
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
 	};
 
 	reserved-memory {