From 4260330b32b14330cfe427d568ac5f5b29b5be3d Mon Sep 17 00:00:00 2001 From: Edwin Peer Date: Sun, 15 Nov 2020 19:27:49 -0500 Subject: [PATCH 1/4] bnxt_en: read EEPROM A2h address using page 0 The module eeprom address range returned by bnxt_get_module_eeprom() should be 256 bytes of A0h address space, the lower half of the A2h address space, and page 0 for the upper half of the A2h address space. Fix the firmware call by passing page_number 0 for the A2h slave address space. Fixes: 42ee18fe4ca2 ("bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO") Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 53687bc7fcf5..f133ea5674cb 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -2997,7 +2997,7 @@ static int bnxt_get_module_eeprom(struct net_device *dev, /* Read A2 portion of the EEPROM */ if (length) { start -= ETH_MODULE_SFF_8436_LEN; - rc = bnxt_read_sfp_module_eeprom_info(bp, I2C_DEV_ADDR_A2, 1, + rc = bnxt_read_sfp_module_eeprom_info(bp, I2C_DEV_ADDR_A2, 0, start, length, data); } return rc; From eba93de6d31c1734dee59909020a162de612e41e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 15 Nov 2020 19:27:50 -0500 Subject: [PATCH 2/4] bnxt_en: Free port stats during firmware reset. Firmware is unable to retain the port counters during any kind of fatal or non-fatal resets, so we must clear the port counters to avoid false detection of port counter overflow. Fixes: fea6b3335527 ("bnxt_en: Accumulate all counters.") Reviewed-by: Edwin Peer Reviewed-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 7975f59735d6..448e1ba762ee 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4099,7 +4099,8 @@ static void bnxt_free_mem(struct bnxt *bp, bool irq_re_init) bnxt_free_ntp_fltrs(bp, irq_re_init); if (irq_re_init) { bnxt_free_ring_stats(bp); - if (!(bp->fw_cap & BNXT_FW_CAP_PORT_STATS_NO_RESET)) + if (!(bp->fw_cap & BNXT_FW_CAP_PORT_STATS_NO_RESET) || + test_bit(BNXT_STATE_IN_FW_RESET, &bp->state)) bnxt_free_port_stats(bp); bnxt_free_ring_grps(bp); bnxt_free_vnics(bp); From fa97f303fa4cf8469fd3d1ef29da69c0a3f6ddc8 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 15 Nov 2020 19:27:51 -0500 Subject: [PATCH 3/4] bnxt_en: Fix counter overflow logic. bnxt_add_one_ctr() adds a hardware counter to a software counter and adjusts for the hardware counter wraparound against the mask. The logic assumes that the hardware counter is always smaller than or equal to the mask. This assumption is mostly correct. But in some cases if the firmware is older and does not provide the accurate mask, the driver can use a mask that is smaller than the actual hardware mask. This can cause some extra carry bits to be added to the software counter, resulting in counters that far exceed the actual value. Fix it by masking the hardware counter with the mask passed into bnxt_add_one_ctr(). Fixes: fea6b3335527 ("bnxt_en: Accumulate all counters.") Reviewed-by: Vasundhara Volam Reviewed-by: Pavan Chebbi Reviewed-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 448e1ba762ee..7c21aaa8b9af 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -7758,6 +7758,7 @@ static void bnxt_add_one_ctr(u64 hw, u64 *sw, u64 mask) { u64 sw_tmp; + hw &= mask; sw_tmp = (*sw & ~mask) | hw; if (hw < (*sw & mask)) sw_tmp += mask + 1; From 0ae0a779efb8840a0cdb2d6bd9a5d07663ac3ee2 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Sun, 15 Nov 2020 19:27:52 -0500 Subject: [PATCH 4/4] bnxt_en: Avoid unnecessary NVM_GET_DEV_INFO cmd error log on VFs. VFs do not have access permissions to issue NVM_GET_DEV_INFO firmware command. Fixes: 4933f6753b50 ("bnxt_en: Add bnxt_hwrm_nvm_get_dev_info() to query NVM info.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index f133ea5674cb..1471c9a36238 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -2079,6 +2079,9 @@ int bnxt_hwrm_nvm_get_dev_info(struct bnxt *bp, struct hwrm_nvm_get_dev_info_input req = {0}; int rc; + if (BNXT_VF(bp)) + return -EOPNOTSUPP; + bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_NVM_GET_DEV_INFO, -1, -1); mutex_lock(&bp->hwrm_cmd_lock); rc = _hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);