diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 7dc299aeee15..94a254c0725e 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -64,19 +64,21 @@ EXPORT_SYMBOL_NS_GPL(ad7606_reset, IIO_AD7606);
 
 static int ad7606_16bit_chan_scale_setup(struct ad7606_state *st, int ch)
 {
+	struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+
 	if (!st->sw_mode_en) {
 		/* tied to logic low, analog input range is +/- 5V */
-		st->range[ch] = 0;
-		st->scale_avail = ad7606_16bit_hw_scale_avail;
-		st->num_scales = ARRAY_SIZE(ad7606_16bit_hw_scale_avail);
+		cs->range = 0;
+		cs->scale_avail = ad7606_16bit_hw_scale_avail;
+		cs->num_scales = ARRAY_SIZE(ad7606_16bit_hw_scale_avail);
 		return 0;
 	}
 
 	/* Scale of 0.076293 is only available in sw mode */
 	/* After reset, in software mode, ±10 V is set by default */
-	st->range[ch] = 2;
-	st->scale_avail = ad7606_16bit_sw_scale_avail;
-	st->num_scales = ARRAY_SIZE(ad7606_16bit_sw_scale_avail);
+	cs->range = 2;
+	cs->scale_avail = ad7606_16bit_sw_scale_avail;
+	cs->num_scales = ARRAY_SIZE(ad7606_16bit_sw_scale_avail);
 
 	return 0;
 }
@@ -167,6 +169,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 {
 	int ret, ch = 0;
 	struct ad7606_state *st = iio_priv(indio_dev);
+	struct ad7606_chan_scale *cs;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -180,8 +183,9 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		if (st->sw_mode_en)
 			ch = chan->address;
+		cs = &st->chan_scales[ch];
 		*val = 0;
-		*val2 = st->scale_avail[st->range[ch]];
+		*val2 = cs->scale_avail[cs->range];
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		*val = st->oversampling;
@@ -211,8 +215,9 @@ static ssize_t in_voltage_scale_available_show(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
+	struct ad7606_chan_scale *cs = &st->chan_scales[0];
 
-	return ad7606_show_avail(buf, st->scale_avail, st->num_scales, true);
+	return ad7606_show_avail(buf, cs->scale_avail, cs->num_scales, true);
 }
 
 static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
@@ -250,19 +255,21 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 			    long mask)
 {
 	struct ad7606_state *st = iio_priv(indio_dev);
+	struct ad7606_chan_scale *cs;
 	int i, ret, ch = 0;
 
 	guard(mutex)(&st->lock);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
-		i = find_closest(val2, st->scale_avail, st->num_scales);
 		if (st->sw_mode_en)
 			ch = chan->address;
+		cs = &st->chan_scales[ch];
+		i = find_closest(val2, cs->scale_avail, cs->num_scales);
 		ret = st->write_scale(indio_dev, ch, i);
 		if (ret < 0)
 			return ret;
-		st->range[ch] = i;
+		cs->range = i;
 
 		return 0;
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
@@ -707,7 +714,7 @@ static int ad7606_resume(struct device *dev)
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	if (st->gpio_standby) {
-		gpiod_set_value(st->gpio_range, st->range[0]);
+		gpiod_set_value(st->gpio_range, st->chan_scales[0].range);
 		gpiod_set_value(st->gpio_standby, 1);
 		ad7606_reset(st);
 	}
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index 95f3b3cb0be3..2b90f52affba 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -8,6 +8,8 @@
 #ifndef IIO_ADC_AD7606_H_
 #define IIO_ADC_AD7606_H_
 
+#define AD760X_MAX_CHANNELS	16
+
 #define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all, bits) {	\
 		.type = IIO_VOLTAGE,				\
 		.indexed = 1,					\
@@ -66,17 +68,27 @@ struct ad7606_chip_info {
 	unsigned long			init_delay_ms;
 };
 
+/**
+ * struct ad7606_chan_scale - channel scale configuration
+ * @scale_avail		pointer to the array which stores the available scales
+ * @num_scales		number of elements stored in the scale_avail array
+ * @range		voltage range selection, selects which scale to apply
+ */
+struct ad7606_chan_scale {
+	const unsigned int		*scale_avail;
+	unsigned int			num_scales;
+	unsigned int			range;
+};
+
 /**
  * struct ad7606_state - driver instance specific data
  * @dev		pointer to kernel device
  * @chip_info		entry in the table of chips that describes this device
  * @bops		bus operations (SPI or parallel)
- * @range		voltage range selection, selects which scale to apply
+ * @chan_scales		scale configuration for channels
  * @oversampling	oversampling selection
  * @base_address	address from where to read data in parallel operation
  * @sw_mode_en		software mode enabled
- * @scale_avail		pointer to the array which stores the available scales
- * @num_scales		number of elements stored in the scale_avail array
  * @oversampling_avail	pointer to the array which stores the available
  *			oversampling ratios.
  * @num_os_ratios	number of elements stored in oversampling_avail array
@@ -100,12 +112,10 @@ struct ad7606_state {
 	struct device			*dev;
 	const struct ad7606_chip_info	*chip_info;
 	const struct ad7606_bus_ops	*bops;
-	unsigned int			range[16];
+	struct ad7606_chan_scale	chan_scales[AD760X_MAX_CHANNELS];
 	unsigned int			oversampling;
 	void __iomem			*base_address;
 	bool				sw_mode_en;
-	const unsigned int		*scale_avail;
-	unsigned int			num_scales;
 	const unsigned int		*oversampling_avail;
 	unsigned int			num_os_ratios;
 	int (*write_scale)(struct iio_dev *indio_dev, int ch, int val);