diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index 62ebd89fd787..ee4ab85e2801 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -18,7 +18,7 @@
 /* return true if s1 is a prefix of s2 */
 #define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1))
 
-#define UFS_ANY_VENDOR -1
+#define UFS_ANY_VENDOR 0xFFFF
 #define UFS_ANY_MODEL  "ANY_MODEL"
 
 #define MAX_MODEL_LEN 16
@@ -119,16 +119,28 @@ struct ufs_dev_fix {
  */
 #define UFS_DEVICE_NO_FASTAUTO		(1 << 5)
 
+/*
+ * It seems some UFS devices may keep drawing more than sleep current
+ * (atleast for 500us) from UFS rails (especially from VCCQ rail).
+ * To avoid this situation, add 2ms delay before putting these UFS
+ * rails in LPM mode.
+ */
+#define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM	(1 << 6)
+
 struct ufs_hba;
 void ufs_advertise_fixup_device(struct ufs_hba *hba);
 
 static struct ufs_dev_fix ufs_fixups[] = {
 	/* UFS cards deviations table */
+	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
 		UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
 		UFS_DEVICE_NO_FASTAUTO),
+	UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
 	UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
 		UFS_DEVICE_QUIRK_PA_TACTIVATE),
 	UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 93cc02f2d48e..f8fa72c31a9d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5715,6 +5715,16 @@ static int ufshcd_link_state_transition(struct ufs_hba *hba,
 
 static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
 {
+	/*
+	 * It seems some UFS devices may keep drawing more than sleep current
+	 * (atleast for 500us) from UFS rails (especially from VCCQ rail).
+	 * To avoid this situation, add 2ms delay before putting these UFS
+	 * rails in LPM mode.
+	 */
+	if (!ufshcd_is_link_active(hba) &&
+	    hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM)
+		usleep_range(2000, 2100);
+
 	/*
 	 * If UFS device is either in UFS_Sleep turn off VCC rail to save some
 	 * power.