From 8077f593d77cf53b0e0ee467b2de2f9e781ab437 Mon Sep 17 00:00:00 2001 From: Andre Heider Date: Tue, 8 Sep 2020 09:30:50 +0200 Subject: [PATCH 01/13] arm64: dts: marvell: espressobin: Simplify v7 ethernet port labeling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that the switch ports have a label in the .dtsi, simplify the whole "switch0" block for the v7 dts files. Signed-off-by: Andre Heider Reviewed-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- .../armada-3720-espressobin-v7-emmc.dts | 18 +++++------------ .../marvell/armada-3720-espressobin-v7.dts | 20 ++++++------------- 2 files changed, 11 insertions(+), 27 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index 215d2f702623..61d49d6a2a2a 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -28,20 +28,12 @@ aliases { }; }; -&switch0 { - ports { - switch0port1: port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; +&switch0port1 { + label = "lan1"; +}; - switch0port3: port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; - }; - }; +&switch0port3 { + label = "wan"; }; /* U11 */ diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts index b6f4af8ebafb..44dbe9a21cc7 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -27,18 +27,10 @@ aliases { }; }; -&switch0 { - ports { - switch0port1: port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; - - switch0port3: port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; - }; - }; +&switch0port1 { + label = "lan1"; +}; + +&switch0port3 { + label = "wan"; }; From d77998497783cab316acde46add4ee4cc70fb76f Mon Sep 17 00:00:00 2001 From: Andre Heider Date: Tue, 22 Sep 2020 06:31:41 +0200 Subject: [PATCH 02/13] arm64: dts: marvell: espressobin: Get rid of duplicate serial aliases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The included armada-37xx.dtsi already defines these two aliases. Signed-off-by: Andre Heider Reviewed-by: Pali Rohár Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 0775c16e0ec8..3169a820558f 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -17,8 +17,6 @@ aliases { ethernet1 = &switch0port1; ethernet2 = &switch0port2; ethernet3 = &switch0port3; - serial0 = &uart0; - serial1 = &uart1; }; chosen { From f9559f029ebe05a87e9689f4aa444e19cc7426e4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Fri, 25 Sep 2020 10:50:43 +0200 Subject: [PATCH 03/13] arm64: dts: marvell: espressobin: De-duplicate eMMC definitions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit eMMC definitions in files armada-3720-espressobin-emmc.dts and armada-3720-espressobin-v7-emmc.dts is same. So move it into common armada-3720-espressobin.dtsi file with status "disabled". This change simplifies eMMC variants of DTS files for Espressobin. Signed-off-by: Pali Rohár Reviewed-by: Andre Heider Tested-by: Andre Heider Signed-off-by: Gregory CLEMENT --- .../marvell/armada-3720-espressobin-emmc.dts | 18 -------------- .../armada-3720-espressobin-v7-emmc.dts | 18 -------------- .../dts/marvell/armada-3720-espressobin.dtsi | 24 +++++++++++++++++++ 3 files changed, 24 insertions(+), 36 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts index ec72a11ed80f..5c4d8f379704 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -21,24 +21,6 @@ / { "marvell,armada3720", "marvell,armada3710"; }; -/* U11 */ &sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index 61d49d6a2a2a..e225dce64b9e 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -36,24 +36,6 @@ &switch0port3 { label = "wan"; }; -/* U11 */ &sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - mmccard: mmccard@0 { - compatible = "mmc-card"; - reg = <0>; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 3169a820558f..8a1c678bea5f 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -58,6 +58,30 @@ &sata { phy-names = "sata-phy"; }; +/* U11 */ +&sdhci0 { + /* Main DTS file for Espressobin is without eMMC */ + status = "disabled"; + + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; + /* J1 */ &sdhci1 { wp-inverted; From 6d96e11b777129d709096744e125bd866ff8b5a1 Mon Sep 17 00:00:00 2001 From: Luka Kovacic Date: Sun, 25 Oct 2020 02:13:51 +0100 Subject: [PATCH 04/13] arm64: dts: marvell: Add a device tree for the IEI Puzzle-M801 board Add initial support for the IEI Puzzle-M801 1U Rackmount Network Appliance board. The board is based on the quad-core Marvell Armada 8040 SoC and supports up to 16 GB of DDR4 2400 MHz ECC RAM. It has a PCIe x16 slot (x2 lanes only) and an M.2 type B slot. Main system hardware: 2x USB 3.0 4x Gigabit Ethernet 2x SFP+ 1x SATA 3.0 1x M.2 type B 1x RJ45 UART 1x SPI flash 1x IEI WT61P803 PUZZLE Microcontroller 1x EPSON RX8010 RTC (used instead of the integrated Marvell RTC controller) 6x SFP+ LED 1x HDD LED All of the hardware listed above is supported and tested in this port. Signed-off-by: Luka Kovacic Acked-by: Andrew Lunn Cc: Luka Perkov Cc: Robert Marko Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/Makefile | 1 + .../dts/marvell/armada-8040-puzzle-m801.dts | 523 ++++++++++++++++++ 2 files changed, 524 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 3e5f2e7a040c..e413c3261792 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-puzzle-m801.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts new file mode 100644 index 000000000000..dac85fa748de --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2020 Sartura Ltd. + * + * Device Tree file for IEI Puzzle-M801 + */ + +#include "armada-8040.dtsi" + +#include +#include + +/ { + model = "IEI-Puzzle-M801"; + compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp0_eth1; + ethernet3 = &cp0_eth2; + ethernet4 = &cp1_eth1; + ethernet5 = &cp1_eth2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + /* Regulator labels correspond with schematics */ + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + v_vddo_h: regulator-1-8v { + compatible = "regulator-fixed"; + regulator-name = "v_vddo_h"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpplus0_i2c>; + los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + sfp_cp1_eth0: sfp-cp1-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpplus1_i2c>; + los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>; + pinctrl-names = "default"; + + led-0 { + /* SFP+ port 2: Activity */ + function = LED_FUNCTION_LAN; + function-enumerator = <0>; + gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* SFP+ port 1: Activity */ + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* SFP+ port 2: 10 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* SFP+ port 2: 1 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* SFP+ port 1: 10 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + /* SFP+ port 1: 1 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <5>; + gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>; + }; + + led-6 { + function = LED_FUNCTION_DISK; + linux,default-trigger = "disk-activity"; + gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + }; + + }; +}; + +&ap_sdhci0 { + bus-width = <8>; + /* + * Not stable in HS modes - phy needs "more calibration", so add + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. + */ + marvell,xenon-phy-slow-mode; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_vddo_h>; +}; + +&ap_thermal_cpu1 { + trips { + cpu_active: cpu-active { + temperature = <44000>; + hysteresis = <2000>; + type = "active"; + }; + }; + cooling-maps { + fan-map { + trip = <&cpu_active>; + cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>, + <&chassis_fan_group1 64 THERMAL_NO_LIMIT>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8010"; + reg = <0x32>; + }; +}; + +&spi0 { + status = "okay"; + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x001f0000>; + }; + partition@u-boot-env { + label = "u-boot-env"; + reg = <0x001f0000 0x00010000>; + }; + partition@ubi1 { + label = "ubi1"; + reg = <0x00200000 0x03f00000>; + }; + partition@ubi2 { + label = "ubi2"; + reg = <0x04100000 0x03f00000>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&uart1 { + status = "okay"; + /* IEI WT61P803 PUZZLE MCU Controller */ + mcu { + compatible = "iei,wt61p803-puzzle"; + current-speed = <115200>; + enable-beep; + + leds { + compatible = "iei,wt61p803-puzzle-leds"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_POWER; + color = ; + }; + }; + + hwmon { + compatible = "iei,wt61p803-puzzle-hwmon"; + #address-cells = <1>; + #size-cells = <0>; + + chassis_fan_group0:fan-group@0 { + #cooling-cells = <2>; + reg = <0x00>; + cooling-levels = <64 102 170 230 250>; + }; + + chassis_fan_group1:fan-group@1 { + #cooling-cells = <2>; + reg = <0x01>; + cooling-levels = <64 102 170 230 250>; + }; + }; + }; +}; + +&cp0_rtc { + status = "disabled"; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + + sfpplus_gpio: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + }; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpplus0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + sfpplus1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + +&cp0_mdio { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + ge_phy2: ethernet-phy@0 { + reg = <0>; + }; + + ge_phy3: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pcie_pins>; + num-lanes = <1>; + num-viewport = <8>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp32", "mpp34"; + marvell,function = "ge"; + }; + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + cp0_pcie_pins: pcie-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_sfpplus_led_pins: sfpplus-led-pins { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + phys = <&cp0_comphy4 0>; + local-mac-address = [ae 00 00 00 ff 00]; + sfp = <&sfp_cp0_eth0>; + managed = "in-band-status"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&ge_phy2>; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 01]; + phys = <&cp0_comphy3 1>; +}; + +&cp0_eth2 { + status = "okay"; + phy-mode = "sgmii"; + phys = <&cp0_comphy1 2>; + local-mac-address = [ae 00 00 00 ff 02]; + phy = <&ge_phy3>; +}; + +&cp0_sata0 { + status = "okay"; + + sata-port@0 { + phys = <&cp0_comphy2 0>; + phy-names = "cp0-sata0-0-phy"; + }; + + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_usb3_0 { + status = "okay"; +}; + +&cp0_usb3_1 { + status = "okay"; +}; + +&cp1_i2c0 { + clock-frequency = <100000>; + status = "disabled"; +}; + +&cp1_i2c1 { + clock-frequency = <100000>; + status = "disabled"; +}; + +&cp1_rtc { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + phys = <&cp1_comphy4 0>; + local-mac-address = [ae 00 00 00 ff 03]; + sfp = <&sfp_cp1_eth0>; + managed = "in-band-status"; +}; + +&cp1_eth1 { + status = "okay"; + phy = <&ge_phy4>; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 04]; + phys = <&cp1_comphy3 1>; +}; + +&cp1_eth2 { + status = "okay"; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 05]; + phys = <&cp1_comphy5 2>; + phy = <&ge_phy5>; +}; + +&cp1_pinctrl { + cp1_sfpplus_led_pins: sfpplus-led-pins { + marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31"; + marvell,function = "gpio"; + }; +}; + +&cp1_uart0 { + status = "disabled"; +}; + +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&cp1_usb3_0 { + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; + status = "okay"; +}; + +&cp1_mdio { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + ge_phy4: ethernet-phy@1 { + reg = <1>; + }; + ge_phy5: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp1_pcie0 { + num-lanes = <2>; + phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; + phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy"; + status = "okay"; +}; From c1e9911fcc54afb2ccfe8bab213ec6679c455675 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 6 Oct 2020 14:44:55 +0200 Subject: [PATCH 05/13] arm64: dts: marvell: espressobin: Add support for LED2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit LED2 is connected to MPP1_2 pin. It is working only on V7 boards. V5 boards have hw bug which cause that LED2 is non-working. So enable LED2 only for Espressobin V7 boards. Note that LED1 is connected to LED_WLAN# pin on miniPCIe card and LED3 to power supply. Therefore on Espressobin board only LED2 can be controlled directly from the host. LED1 is possible to control via WiFi card inserted in miniPCIe slot if driver for particular card supports it. Signed-off-by: Pali Rohár Tested-by: Gérald Kerma Signed-off-by: Gregory CLEMENT --- .../dts/marvell/armada-3720-espressobin-v7-emmc.dts | 4 ++++ .../boot/dts/marvell/armada-3720-espressobin-v7.dts | 4 ++++ .../boot/dts/marvell/armada-3720-espressobin.dtsi | 13 +++++++++++++ 3 files changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index e225dce64b9e..58b94db5f652 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -39,3 +39,7 @@ &switch0port3 { &sdhci0 { status = "okay"; }; + +&led2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts index 44dbe9a21cc7..b22ae550a45b 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -34,3 +34,7 @@ &switch0port1 { &switch0port3 { label = "wan"; }; + +&led2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 8a1c678bea5f..daffe136c523 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -41,6 +41,19 @@ vcc_sd_reg1: regulator { 3300000 0x0>; enable-active-high; }; + + led2: gpio-led2 { + /* led2 is working only on v7 board */ + status = "disabled"; + + compatible = "gpio-leds"; + + led2 { + label = "led2"; + gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; /* J9 */ From 3404fe15a60fe790799d6e1dd5de51997f338cc6 Mon Sep 17 00:00:00 2001 From: Vladimir Vid Date: Mon, 26 Oct 2020 19:44:42 +0100 Subject: [PATCH 06/13] arm64: dts: marvell: add DT for ESPRESSObin-Ultra This adds support for ESPRESSObin-Ultra from Globalscale. Specifications are similar to the base ESPRESSObin board, with main difference being being WAN port with PoE capability and 2 additional ethernet ports. Full specifications: 1x Marvell 64 bit Dual Core ARM A53 Armada 3700 SOC clocked up to 1.2Ghz 1x Topaz 6341 Networking Switch 1GB DDR4 8GB eMMC 1x WAN with 30W POE 4x Gb LAN 1x RTC Clock and battery 1x DC Jack 1x USB 3.0 Type A 1x USB 2.0 Type A 1x SIM NanoSIM card Slot 1x Power Button 4x LED 1x Reset button 1x microUSB for UART 1x M.2 2280 slot for memory 1x 2x2 802.11ac Wi-Fi 1x MiniPCIE slot for Wi-Fi (PCIe interface) Signed-off-by: Vladimir Vid Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/Makefile | 1 + .../marvell/armada-3720-espressobin-ultra.dts | 165 ++++++++++++++++++ 2 files changed, 166 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index e413c3261792..34efe0fb6f37 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts new file mode 100644 index 000000000000..c5eb3604dd5b --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for ESPRESSObin-Ultra board. + * Copyright (C) 2019 Globalscale technologies, Inc. + * + * Jason Hung + */ + +/dts-v1/; + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Ultra Board"; + compatible = "globalscale,espressobin-ultra", "marvell,armada3720", + "marvell,armada3710"; + + aliases { + /* ethernet1 is WAN port */ + ethernet1 = &switch0port5; + ethernet2 = &switch0port1; + ethernet3 = &switch0port2; + ethernet4 = &switch0port3; + ethernet5 = &switch0port4; + }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_usb3_vbus>; + }; + + gpio-leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + /* No assigned functions to the LEDs by default */ + led1 { + label = "ebin-ultra:blue:led1"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + led2 { + label = "ebin-ultra:green:led2"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + led3 { + label = "ebin-ultra:red:led3"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + led4 { + label = "ebin-ultra:yellow:led4"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&sdhci1 { + status = "disabled"; +}; + +&spi0 { + flash@0 { + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x3e0000>; + }; + partition@3e0000 { + label = "hw-info"; + reg = <0x3e0000 0x10000>; + read-only; + }; + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&usb3 { + usb-phy = <&usb3_phy>; + status = "disabled"; +}; + +&mdio { + extphy: ethernet-phy@1 { + reg = <1>; + }; +}; + +&switch0 { + reg = <3>; + + ports { + switch0port1: port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&switch0phy0>; + }; + + switch0port2: port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + switch0port3: port@3 { + reg = <3>; + label = "lan2"; + phy-handle = <&switch0phy2>; + }; + + switch0port4: port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + switch0port5: port@5 { + reg = <5>; + label = "wan"; + phy-handle = <&extphy>; + phy-mode = "sgmii"; + }; + }; + + mdio { + switch0phy3: switch0phy3@14 { + reg = <0x14>; + }; + }; +}; From 53e950d597e3578da84238b86424bfcc9e101d87 Mon Sep 17 00:00:00 2001 From: Sven Auhagen Date: Mon, 9 Nov 2020 18:39:48 +0100 Subject: [PATCH 07/13] arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts There are two SATA ports per CP110. Each of them has a dedicated interrupt. Describe the real hardware by adding two SATA ports to the CP110 SATA node. Reviewed-by: Hans de Goede Signed-off-by: Sven Auhagen Signed-off-by: Thomas Petazzoni Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 9dcf16beabf5..ec27294f097b 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -300,11 +300,9 @@ CP11X_LABEL(usb3_1): usb3@510000 { }; CP11X_LABEL(sata0): sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; + compatible = "marvell,armada-8k-ahci"; reg = <0x540000 0x30000>; dma-coherent; - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP11X_LABEL(clk) 1 15>, <&CP11X_LABEL(clk) 1 16>; #address-cells = <1>; @@ -312,10 +310,12 @@ CP11X_LABEL(sata0): sata@540000 { status = "disabled"; sata-port@0 { + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>; reg = <0>; }; sata-port@1 { + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; reg = <1>; }; }; From 3aa669a994c9110a2dc7e08a5c0958a9ea5eb17c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Beh=C3=BAn?= Date: Sat, 14 Nov 2020 21:42:53 +0100 Subject: [PATCH 08/13] arm64: dts: armada-3720-turris-mox: update ethernet-phy handle name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use property name `phy-handle` instead of the deprecated `phy` to connect eth2 to the PHY. Signed-off-by: Marek Behún Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Cc: Gregory CLEMENT Cc: Andrew Lunn Cc: Rob Herring Cc: devicetree@vger.kernel.org Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index f3a678e0fd99..bf76ebe46379 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -146,7 +146,7 @@ ð0 { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; - phy = <&phy1>; + phy-handle = <&phy1>; status = "okay"; }; From cbc4a395dcc730be9114ef077a67e07b32a029a4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Mon, 5 Oct 2020 15:35:13 +0200 Subject: [PATCH 09/13] arm64: dts: marvell: espressobin: Update link to V7 schematic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Up-to-date version of V7 schematic is on new URL linked from official tech-spec webpage http://espressobin.net/tech-spec/ Signed-off-by: Pali Rohár Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts | 2 +- arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index 58b94db5f652..75401eab4d42 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -8,7 +8,7 @@ * */ /* - * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf */ /dts-v1/; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts index b22ae550a45b..48a7f50fb427 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -8,7 +8,7 @@ * */ /* - * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf */ /dts-v1/; From 83afd0b3e0279107ff06945bad4b63a1fbe83224 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Wed, 11 Nov 2020 12:15:45 +0300 Subject: [PATCH 10/13] arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name In accordance with the Generic xHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are correctly named. Signed-off-by: Serge Semin Acked-by: Krzysztof Kozlowski Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index ec27294f097b..994a2fce449a 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -275,7 +275,7 @@ CP11X_LABEL(thermal): thermal-sensor@70 { }; }; - CP11X_LABEL(usb3_0): usb3@500000 { + CP11X_LABEL(usb3_0): usb@500000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; reg = <0x500000 0x4000>; @@ -287,7 +287,7 @@ CP11X_LABEL(usb3_0): usb3@500000 { status = "disabled"; }; - CP11X_LABEL(usb3_1): usb3@510000 { + CP11X_LABEL(usb3_1): usb@510000 { compatible = "marvell,armada-8k-xhci", "generic-xhci"; reg = <0x510000 0x4000>; From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001 From: Tomasz Maciej Nowak Date: Tue, 10 Nov 2020 16:38:31 +0100 Subject: [PATCH 11/13] arm64: dts: mcbin-singleshot: add heartbeat LED With board revision 1.3, SolidRun moved the power LED to the middle of the board. In old place of power LED a GPIO controllable heartbeat LED was added. This commit only touches Single Shot variant, since only this variant is all revision 1.3. Reported-by: Alexandra Alth Signed-off-by: Tomasz Maciej Nowak Signed-off-by: Gregory CLEMENT --- .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts index 2e6832d02a59..411d20064271 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts @@ -5,6 +5,8 @@ * Device Tree file for MACCHIATOBin Armada 8040 community board platform */ +#include + #include "armada-8040-mcbin.dtsi" / { @@ -12,6 +14,19 @@ / { compatible = "marvell,armada8040-mcbin-singleshot", "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led18_pins>; + pinctrl-names = "default"; + + led18 { + gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = ; + linux,default-trigger = "heartbeat"; + }; + }; }; &cp0_eth0 { @@ -27,3 +42,10 @@ &cp1_eth0 { managed = "in-band-status"; sfp = <&sfp_eth1>; }; + +&cp0_pinctrl { + cp0_led18_pins: led18-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; +}; From f43cadef2df260101497a6aace05e24201f00202 Mon Sep 17 00:00:00 2001 From: Tomasz Nowicki Date: Thu, 5 Nov 2020 12:26:02 +0100 Subject: [PATCH 12/13] arm64: dts: marvell: keep SMMU disabled by default for Armada 7040 and 8040 FW has to configure devices' StreamIDs so that SMMU is able to lookup context and do proper translation later on. For Armada 7040 & 8040 and publicly available FW, most of the devices are configured properly, but some like ap_sdhci0, PCIe, NIC still remain unassigned which results in SMMU faults about unmatched StreamID (assuming ARM_SMMU_DISABLE_BYPASS_BY_DEFAUL=y). Since there is dependency on custom FW let SMMU be disabled by default. People who still willing to use SMMU need to enable manually and use ARM_SMMU_DISABLE_BYPASS_BY_DEFAUL=n (or via kernel command line) with extra caution. Fixes: 83a3545d9c37 ("arm64: dts: marvell: add SMMU support") Cc: # 5.9+ Signed-off-by: Tomasz Nowicki Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-7040.dtsi | 4 ---- arch/arm64/boot/dts/marvell/armada-8040.dtsi | 4 ---- 2 files changed, 8 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi index 7a3198cd7a07..2f440711d21d 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi @@ -15,10 +15,6 @@ / { "marvell,armada-ap806"; }; -&smmu { - status = "okay"; -}; - &cp0_pcie0 { iommu-map = <0x0 &smmu 0x480 0x20>, diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 79e8ce59baa8..22c2d6ebf381 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -15,10 +15,6 @@ / { "marvell,armada-ap806"; }; -&smmu { - status = "okay"; -}; - &cp0_pcie0 { iommu-map = <0x0 &smmu 0x480 0x20>, From a2081c09d7410c3e55d902a09602b833dc96c58a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Beh=C3=BAn?= Date: Mon, 16 Nov 2020 13:33:03 +0100 Subject: [PATCH 13/13] arm64: dts: armada-3720-turris-mox: add 3W power capability to SFP cage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add maximum-power-milliwatt = 3000 to SFP node of Turris MOX. Signed-off-by: Marek Behún Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Cc: Gregory CLEMENT Cc: Andrew Lunn Cc: Rob Herring Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index bf76ebe46379..f5ec3b644769 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -102,6 +102,7 @@ sfp: sfp { mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; /* enabled by U-Boot if SFP module is present */ status = "disabled";