diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 5c2d3ff5fce8..c4bf5475fcb3 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2354,12 +2354,15 @@ config SENSORS_INA3221
 
 config SENSORS_SPD5118
 	tristate "SPD5118 Compliant Temperature Sensors"
-	depends on I2C
+	depends on I3C_OR_I2C
 	select REGMAP_I2C
+	select REGMAP_I3C if I3C
 	help
 	  If you say yes here you get support for SPD5118 (JEDEC JESD300)
-	  compliant temperature sensors. Such sensors are found on DDR5 memory
-	  modules.
+	  compliant temperature sensors using I2C or I3C bus interface.
+	  Such sensors are found on DDR5 memory modules.
+
+	  This driver supports both I2C and I3C interfaces.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called spd5118.
diff --git a/drivers/hwmon/spd5118.c b/drivers/hwmon/spd5118.c
index 6ba37a719300..9724cf70b61d 100644
--- a/drivers/hwmon/spd5118.c
+++ b/drivers/hwmon/spd5118.c
@@ -18,6 +18,7 @@
 #include <linux/bits.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/i3c/device.h>
 #include <linux/hwmon.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -464,6 +465,27 @@ static const struct regmap_config spd5118_regmap8_config = {
 	.num_ranges = ARRAY_SIZE(spd5118_i2c_regmap_range_cfg),
 };
 
+/*
+ * SPD5118 2-byte register address format (JESD300-5, Tables 7 & 20):
+ *   Byte 1 (on wire first):  MemReg | BlkAddr[0] | Address[5:0]
+ *   Byte 2 (on wire second): 0000   | BlkAddr[4:1]
+ *
+ * The address byte (with MemReg and lower address bits) must be sent first,
+ * followed by the upper block address byte. With regmap 16-bit register
+ * format, this maps to little-endian: the low byte of the 16-bit value is
+ * transmitted first. No range config is needed since I3C does not use MR11
+ * page switching.
+ */
+static const struct regmap_config spd5118_regmap_i3c_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.max_register = 0x7ff,
+	.reg_format_endian = REGMAP_ENDIAN_LITTLE,
+	.writeable_reg = spd5118_writeable_reg,
+	.volatile_reg = spd5118_volatile_reg,
+	.cache_type = REGCACHE_MAPLE,
+};
+
 static int spd5118_suspend(struct device *dev)
 {
 	struct spd5118_data *data = dev_get_drvdata(dev);
@@ -701,7 +723,39 @@ static struct i2c_driver spd5118_i2c_driver = {
 	.address_list	= IS_ENABLED(CONFIG_SENSORS_SPD5118_DETECT) ? normal_i2c : NULL,
 };
 
-module_i2c_driver(spd5118_i2c_driver);
+/* I3C */
+
+static int spd5118_i3c_probe(struct i3c_device *i3cdev)
+{
+	struct device *dev = i3cdev_to_dev(i3cdev);
+	struct regmap *regmap;
+	u8 regval[2];
+	int err;
+
+	regmap = devm_regmap_init_i3c(i3cdev, &spd5118_regmap_i3c_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap), "regmap init failed\n");
+
+	err = regmap_bulk_read(regmap, SPD5118_REG_TYPE, regval, 2);
+	if (err)
+		return dev_err_probe(dev, err, "failed to read device type\n");
+
+	if (regval[0] != 0x51 || regval[1] != 0x18)
+		return -ENODEV;
+
+	return spd5118_common_probe(dev, regmap);
+}
+
+static struct i3c_driver spd5118_i3c_driver = {
+	.driver = {
+		.name	= "spd5118_i3c",
+		.of_match_table = spd5118_of_ids,
+		.pm = pm_sleep_ptr(&spd5118_pm_ops),
+	},
+	.probe		= spd5118_i3c_probe,
+};
+
+module_i3c_i2c_driver(spd5118_i3c_driver, &spd5118_i2c_driver);
 
 MODULE_AUTHOR("René Rebe <rene@exactcode.de>");
 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");