cxl: Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'

The pending efforts to add CXL Accelerator (type-2) device [1], and
Dynamic Capacity (DCD) support [2], tripped on the
no-longer-fit-for-purpose design in the CXL subsystem for tracking
device-physical-address (DPA) metadata. Trip hazards include:

- CXL Memory Devices need to consider a PMEM partition, but Accelerator
  devices with CXL.mem likely do not in the common case.

- CXL Memory Devices enumerate DPA through Memory Device mailbox
  commands like Partition Info, Accelerators devices do not.

- CXL Memory Devices that support DCD support more than 2 partitions.
  Some of the driver algorithms are awkward to expand to > 2 partition
  cases.

- DPA performance data is a general capability that can be shared with
  accelerators, so tracking it in 'struct cxl_memdev_state' is no longer
  suitable.

- Hardcoded assumptions around the PMEM partition always being index-1
  if RAM is zero-sized or PMEM is zero sized.

- 'enum cxl_decoder_mode' is sometimes a partition id and sometimes a
  memory property, it should be phased in favor of a partition id and
  the memory property comes from the partition info.

Towards cleaning up those issues and allowing a smoother landing for the
aforementioned pending efforts, introduce a 'struct cxl_dpa_partition'
array to 'struct cxl_dev_state', and 'struct cxl_range_info' as a shared
way for Memory Devices and Accelerators to initialize the DPA information
in 'struct cxl_dev_state'.

For now, split a new cxl_dpa_setup() from cxl_mem_create_range_info() to
get the new data structure initialized, and cleanup some qos_class init.
Follow on patches will go further to use the new data structure to
cleanup algorithms that are better suited to loop over all possible
partitions.

cxl_dpa_setup() follows the locking expectations of mutating the device
DPA map, and is suitable for Accelerator drivers to use. Accelerators
likely only have one hardcoded 'ram' partition to convey to the
cxl_core.

Link: http://lore.kernel.org/20241230214445.27602-1-alejandro.lucero-palau@amd.com [1]
Link: http://lore.kernel.org/20241210-dcd-type2-upstream-v8-0-812852504400@intel.com [2]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305827.668823.13978794102080021276.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>

tools/testing/cxl/test/cxl.c

@@ -1001,26 +1001,19 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port)
 	struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport_dev);
 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
 	struct access_coordinate ep_c[ACCESS_COORDINATE_MAX];
-	const struct resource *partition[] = {
-		to_ram_res(cxlds),
-		to_pmem_res(cxlds),
-	};
-	struct cxl_dpa_perf *perf[] = {
-		to_ram_perf(cxlds),
-		to_pmem_perf(cxlds),
-	};
 
 	if (!cxl_root)
 		return;
 
-	for (int i = 0; i < ARRAY_SIZE(partition); i++) {
-		const struct resource *res = partition[i];
+	for (int i = 0; i < cxlds->nr_partitions; i++) {
+		struct resource *res = &cxlds->part[i].res;
+		struct cxl_dpa_perf *perf = &cxlds->part[i].perf;
 		struct range range = {
 			.start = res->start,
 			.end = res->end,
 		};
 
-		dpa_perf_setup(port, &range, perf[i]);
+		dpa_perf_setup(port, &range, perf);
 	}
 
 	cxl_memdev_update_perf(cxlmd);

tools/testing/cxl/test/mem.c

@@ -1494,6 +1494,7 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
 	struct cxl_dev_state *cxlds;
 	struct cxl_mockmem_data *mdata;
 	struct cxl_mailbox *cxl_mbox;
+	struct cxl_dpa_info range_info = { 0 };
 	int rc;
 
 	mdata = devm_kzalloc(dev, sizeof(*mdata), GFP_KERNEL);
@@ -1554,7 +1555,11 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
 	if (rc)
 		return rc;
 
-	rc = cxl_mem_create_range_info(mds);
+	rc = cxl_mem_dpa_fetch(mds, &range_info);
+	if (rc)
+		return rc;
+
+	rc = cxl_dpa_setup(cxlds, &range_info);
 	if (rc)
 		return rc;