From 7b31e3ad8b16d90f5fe4521ae31e56017d96f2ed Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Mon, 30 Oct 2017 14:31:07 +0100 Subject: [PATCH 1/3] arm64: dts: marvell: add NAND support on the 8040-DB board Add NAND support on the Armada-8040-DB by adding the same tree as for the Armada-7040-DB by using the same compatible string "marvell,armada-8k-nand". Do not enable the NAND node as enabling it (and changing manually the proper DPR-76 switch) would disable MDIO from CP1 (and thus disable CPS Ethernet PHY). Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- .../arm64/boot/dts/marvell/armada-8040-db.dts | 28 +++++++++++++++++++ arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 17 +++++++++++ .../boot/dts/marvell/armada-cp110-slave.dtsi | 3 +- 3 files changed, 47 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index d97b72bed662..b1f6cccc5081 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -268,6 +268,34 @@ partition@f00000 { }; }; +/* + * Proper NAND usage will require DPR-76 to be in position 1-2, which disables + * MDIO signal of CP1. + */ +&cps_nand { + num-cs = <1>; + pinctrl-0 = <&nand_pins>, <&nand_rb>; + pinctrl-names = "default"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-enable-arbiter; + marvell,system-controller = <&cps_syscon0>; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; +}; + /* CON4 on CP1 expansion */ &cps_sata0 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 666ebe96ba0d..b280ddd3c397 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -72,5 +72,22 @@ cpm_pinctrl: pinctrl { &cps_syscon0 { cps_pinctrl: pinctrl { compatible = "marvell,armada-8k-cps-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = + "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11", + "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp13", "mpp12"; + marvell,function = "nf"; + }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 0d51096c69f8..cb1fb49ccf81 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -317,12 +317,13 @@ cps_nand: nand@720000 { * for A7K and on the CPS for A8K. */ compatible = "marvell,armada370-nand", - "marvell,armada370-nand"; + "marvell,armada-8k-nand"; reg = <0x720000 0x54>; #address-cells = <1>; #size-cells = <1>; interrupts = ; clocks = <&cps_clk 1 2>; + marvell,system-controller = <&cpm_syscon0>; status = "disabled"; }; From e8d66e7927b2a15310df0eb44a67d120ea147a59 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 14 Dec 2017 16:00:06 +0100 Subject: [PATCH 2/3] arm64: dts: marvell: armada-37xx: add nodes allowing cpufreq support In order to be able to use cpu freq, we need to associate a clock to each CPU and to expose the power management registers. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-372x.dtsi | 1 + arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 59d7557d3b1b..2554e0baea6b 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -56,6 +56,7 @@ cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53","arm,armv8"; reg = <0x1>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 90c26d616a54..3056d7168e0b 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -65,6 +65,7 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; @@ -234,6 +235,12 @@ uart2_pins: uart2-pins { }; }; + nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", + "syscon"; + reg = <0x14000 0x60>; + }; + pinctrl_sb: pinctrl@18800 { compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; From 4cada03801992d09ccceaf5f462e9dadb75a9613 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Mon, 18 Dec 2017 15:36:43 +0100 Subject: [PATCH 3/3] ARM64: dts: marvell: Add thermal support for A7K/A8K Add thermal DT nodes in AP806 and CP110 master/slave DTSI files. Suggested-by: David Sniatkiwicz Signed-off-by: Miquel Raynal Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 6 ++++++ arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 6 ++++++ arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 6 ++++++ 3 files changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 1c4dd8ab9ad5..bbc5a4d3acac 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -285,6 +285,12 @@ ap_gpio: gpio@1040 { gpio-ranges = <&ap_pinctrl 0 0 20>; }; }; + + ap_thermal: thermal@6f808C { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x6f808C 0x4>, + <0x6f8084 0x8>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index e3b64d03fbd8..ecbc76d26dff 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -182,6 +182,12 @@ cpm_rtc: rtc@284000 { interrupts = ; }; + cpm_thermal: thermal@400078 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x400078 0x4>, + <0x400070 0x8>; + }; + cpm_syscon0: system-controller@440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x2000>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index cb1fb49ccf81..6a07c786b788 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -182,6 +182,12 @@ cps_rtc: rtc@284000 { interrupts = ; }; + cps_thermal: thermal@400078 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x400078 0x4>, + <0x400070 0x8>; + }; + cps_syscon0: system-controller@440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x2000>;