From 93c60483b5feefced92b869d5f97769495bc6313 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 9 Dec 2019 13:55:15 -0800 Subject: [PATCH 01/24] bus: ti-sysc: Fix missing force mstandby quirk handling Commit 03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for musb") added quirk handling for mstandby quirk but did not consider that we also need a quirk variant for SYSC_QUIRK_FORCE_MSTANDBY. We need to use forced idle mode for both SYSC_QUIRK_SWSUP_MSTANDBY and SYSC_QUIRK_FORCE_MSTANDBY, but SYSC_QUIRK_SWSUP_MSTANDBY also need to additionally also configure no-idle mode when enabled. Fixes: 03856e928b0e ("bus: ti-sysc: Handle mstandby quirk and use it for musb") Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 3 ++- include/linux/platform_data/ti-sysc.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 56887c6877a7..563707779e18 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -981,7 +981,8 @@ static int sysc_disable_module(struct device *dev) return ret; } - if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_MSTANDBY) + if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_MSTANDBY) || + ddata->cfg.quirks & (SYSC_QUIRK_FORCE_MSTANDBY)) best_mode = SYSC_IDLE_FORCE; reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift); diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 0b9380475144..8cfe570fdece 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -49,6 +49,7 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_QUIRK_FORCE_MSTANDBY BIT(20) #define SYSC_MODULE_QUIRK_AESS BIT(19) #define SYSC_MODULE_QUIRK_SGX BIT(18) #define SYSC_MODULE_QUIRK_HDQ1W BIT(17) From c842b8c4ff9859f750447f3ca08f64b2ed23cebc Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Sun, 1 Dec 2019 17:07:06 +0000 Subject: [PATCH 02/24] ARM: dts: am335x-sancloud-bbe: fix phy mode The phy mode should be rgmii-id. For some reason, it used to work with rgmii-txid but doesn't any more. Signed-off-by: Mans Rullgard Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-sancloud-bbe.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts index 8678e6e35493..e5fdb7abb0d5 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -108,7 +108,7 @@ ethphy0: ethernet-phy@0 { &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; }; &i2c0 { From 90d79edc57a5625b9adaf397719e3a760b051167 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 4 Dec 2019 19:45:33 +0200 Subject: [PATCH 03/24] ARM: omap2plus_defconfig: enable NET_SWITCHDEV The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig. Fixes: 3727d259ddaf ("arm: omap2plus_defconfig: enable new cpsw switchdev driver") Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 8c37cc8ab6f2..15e1b2b2410c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -92,6 +92,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NETFILTER=y CONFIG_PHONET=m +CONFIG_NET_SWITCHDEV=y CONFIG_CAN=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m @@ -181,6 +182,7 @@ CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_TI_DAVINCI_EMAC=y CONFIG_TI_CPSW=y +CONFIG_TI_CPSW_SWITCHDEV=y CONFIG_TI_CPTS=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set @@ -556,4 +558,3 @@ CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_TI_CPSW_SWITCHDEV=y From e00b59d30506dc9ef91caf2f3c584209cc9f61e4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 9 Dec 2019 13:41:17 -0800 Subject: [PATCH 04/24] ARM: omap2plus_defconfig: Add back DEBUG_FS Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it at least for enabling deeper idle states for the SoCs. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 15e1b2b2410c..c32c338f7704 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -556,5 +556,6 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_SPLIT=y CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_BUGVERBOSE is not set From c6b16761c6908d3dc167a0a566578b4b0b972905 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 14 Nov 2019 11:39:48 +0200 Subject: [PATCH 05/24] ARM: dts: am437x-gp/epos-evm: fix panel compatible The LCD panel on AM4 GP EVMs and ePOS boards seems to be osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly the panel has changed since the early EVMs, or there has been a mistake with the panel type. Update the DT files accordingly. Acked-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 2 +- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index cae4500194fe..811c8cae315b 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -86,7 +86,7 @@ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ }; lcd0: display { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; label = "lcd"; backlight = <&lcd_bl>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 95314121d111..078cb473fa7d 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -42,7 +42,7 @@ vbat: fixedregulator0 { }; lcd0: display { - compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; label = "lcd"; backlight = <&lcd_bl>; From e709ed70d122e94cb426b1e1f905829eae19a009 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 08:20:10 -0800 Subject: [PATCH 06/24] bus: ti-sysc: Fix missing reset delay handling We have dts property for "ti,sysc-delay-us", and we're using it, but the wait after OCP softreset only happens if devices are probed in legacy mode. Let's add a delay after writing the OCP softreset when specified. Fixes: e0db94fe87da ("bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits") Cc: Keerthy Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 563707779e18..f4d1597df0a2 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1584,6 +1584,10 @@ static int sysc_reset(struct sysc *ddata) sysc_val |= sysc_mask; sysc_write(ddata, sysc_offset, sysc_val); + if (ddata->cfg.srst_udelay) + usleep_range(ddata->cfg.srst_udelay, + ddata->cfg.srst_udelay * 2); + if (ddata->clk_enable_quirk) ddata->clk_enable_quirk(ddata); From 90bdfa0b05e3cc809a7c1aa3b1f162b46ea1b330 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Dec 2019 14:41:53 -0800 Subject: [PATCH 07/24] ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap We must bail out early if the clock is not hw_omap. Otherwise we will try to access invalid address with hwclk->clkdm_name: Unable to handle kernel paging request at virtual address ffffffff Internal error: Oops: 27 [#1] ARM ... (strcmp) from [] (clkdm_lookup+0x40/0x60) [] (clkdm_lookup) from [] (ti_sysc_clkdm_init+0x5c/0x64) [] (ti_sysc_clkdm_init) from [] (sysc_probe+0x948/0x117c) [] (sysc_probe) from [] (platform_drv_probe+0x48/0x98) ... Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pdata-quirks.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index ca52271de5a8..e95c224ffc4d 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -306,10 +306,14 @@ static void __init dra7x_evm_mmc_quirk(void) static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk) { + struct clk_hw *hw = __clk_get_hw(clk); struct clockdomain *clkdm = NULL; struct clk_hw_omap *hwclk; - hwclk = to_clk_hw_omap(__clk_get_hw(clk)); + hwclk = to_clk_hw_omap(hw); + if (!omap2_clk_is_hw_omap(hw)) + return NULL; + if (hwclk && hwclk->clkdm_name) clkdm = clkdm_lookup(hwclk->clkdm_name); From 2c81f0f6d3f52ac222a5dc07a6e5c06e1543e88b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Dec 2019 14:41:53 -0800 Subject: [PATCH 08/24] bus: ti-sysc: Fix iterating over clocks Commit d878970f6ce1 ("bus: ti-sysc: Add separate functions for handling clocks") separated handling of optional clocks from the main clocks, but introduced an issue where we do not necessarily allocate a slot for both fck and ick clocks, but still assume fixed slots for enumerating over the clocks. Let's fix the issue by ensuring we always have slots for both fck and ick even if we don't use ick, and don't attempt to enumerate optional clocks if not allocated. In the long run we might want to simplify things a bit by only allocating space only for the optional clocks as we have only few devices with optional clocks. Fixes: d878970f6ce1 ("bus: ti-sysc: Add separate functions for handling clocks") Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index f4d1597df0a2..ccb44fe790a7 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -343,6 +343,12 @@ static int sysc_get_clocks(struct sysc *ddata) return -EINVAL; } + /* Always add a slot for main clocks fck and ick even if unused */ + if (!nr_fck) + ddata->nr_clocks++; + if (!nr_ick) + ddata->nr_clocks++; + ddata->clocks = devm_kcalloc(ddata->dev, ddata->nr_clocks, sizeof(*ddata->clocks), GFP_KERNEL); @@ -421,7 +427,7 @@ static int sysc_enable_opt_clocks(struct sysc *ddata) struct clk *clock; int i, error; - if (!ddata->clocks) + if (!ddata->clocks || ddata->nr_clocks < SYSC_OPTFCK0 + 1) return 0; for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) { @@ -455,7 +461,7 @@ static void sysc_disable_opt_clocks(struct sysc *ddata) struct clk *clock; int i; - if (!ddata->clocks) + if (!ddata->clocks || ddata->nr_clocks < SYSC_OPTFCK0 + 1) return; for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) { From 65b5969e58de22cf9facac0dd8c772b018cc0b69 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Dec 2019 14:41:53 -0800 Subject: [PATCH 09/24] ARM: dts: Add generic compatible for omap sdma instances We need this to pass auxdata to all the sdma instances. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen Cc: Peter Ujfalusi Cc: Russell King Cc: Vinod Koul Acked-by: Peter Ujfalusi Tested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-l4.dtsi | 2 +- arch/arm/boot/dts/omap4-l4.dtsi | 2 +- arch/arm/boot/dts/omap5-l4.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 7e7aa101d8a4..55f42c8655c5 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -212,7 +212,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x56000 0x1000>; sdma: dma-controller@0 { - compatible = "ti,omap4430-sdma"; + compatible = "ti,omap4430-sdma", "ti,omap-sdma"; reg = <0x0 0x1000>; interrupts = , , diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index 83f803be8ee2..1219e5e9b506 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -160,7 +160,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x56000 0x1000>; sdma: dma-controller@0 { - compatible = "ti,omap4430-sdma"; + compatible = "ti,omap4430-sdma", "ti,omap-sdma"; reg = <0x0 0x1000>; interrupts = , , diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 25aacf1ba708..a6493e818bdf 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -237,7 +237,7 @@ SYSC_OMAP2_SOFTRESET | ranges = <0x0 0x56000 0x1000>; sdma: dma-controller@0 { - compatible = "ti,omap4430-sdma"; + compatible = "ti,omap4430-sdma", "ti,omap-sdma"; reg = <0x0 0x1000>; interrupts = , , From eb6b38b26edf51ab8eb169ade49ff0ecd4d5a39b Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Dec 2019 14:41:53 -0800 Subject: [PATCH 10/24] ARM: dts: Configure interconnect target module for omap2 sdma We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that we want to use separate compatible for omap2420 and omap2430 so let's do that here too while at it. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen Cc: Arnd Bergmann Cc: Peter Ujfalusi Cc: Russell King Cc: Vinod Koul Acked-by: Peter Ujfalusi Tested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap2.dtsi | 42 +++++++++++++++++++++++++-------- arch/arm/boot/dts/omap2430.dtsi | 4 ++++ 2 files changed, 36 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 000bf16de651..6b1552d8c011 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include #include #include #include @@ -79,17 +80,38 @@ intc: interrupt-controller@1 { reg = <0x480FE000 0x1000>; }; - sdma: dma-controller@48056000 { - compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + target-module@48056000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "dma"; - reg = <0x48056000 0x1000>; - interrupts = <12>, - <13>, - <14>, - <15>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <64>; + reg = <0x48056000 0x4>, + <0x4805602c 0x4>, + <0x48056028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = , + , + ; + ti,syss-mask = <1>; + clocks = <&core_l3_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48056000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap2420-sdma", "ti,omap-sdma"; + reg = <0 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <64>; + }; }; i2c1: i2c@48070000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 7f57af2f10ac..15ef7593be12 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -309,6 +309,10 @@ wd_timer2: wdt@49016000 { }; }; +&sdma { + compatible = "ti,omap2430-sdma", "ti,omap-sdma"; +}; + &i2c1 { compatible = "ti,omap2430-i2c"; }; From bfab07ee52a257b14529264bea908ba0382328ac Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 16 Dec 2019 14:41:53 -0800 Subject: [PATCH 11/24] ARM: dts: Configure interconnect target module for omap3 sdma We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Note that we want to use separate compatible for omap34xx and omap36xx so let's do that here too while at it. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen Cc: Arnd Bergmann Cc: Peter Ujfalusi Cc: Russell King Cc: Vinod Koul Acked-by: Peter Ujfalusi Tested-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 5 ++++ arch/arm/boot/dts/omap3.dtsi | 45 +++++++++++++++++++++++++------- arch/arm/boot/dts/omap36xx.dtsi | 4 +++ 3 files changed, 44 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index a638e059135b..c3c6d7d04a76 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -482,6 +482,11 @@ &vintdig { regulator-always-on; }; +/* First two dma channels are reserved on secure omap3 */ +&sdma { + dma-channel-mask = <0xfffffffc>; +}; + &twl { twl_audio: audio { compatible = "ti,twl4030-audio"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 5698a3e241aa..06d9108a8385 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -206,17 +206,42 @@ intc: interrupt-controller@48200000 { reg = <0x48200000 0x1000>; }; - sdma: dma-controller@48056000 { - compatible = "ti,omap3630-sdma", "ti,omap3430-sdma"; - reg = <0x48056000 0x1000>; - interrupts = <12>, - <13>, - <14>, - <15>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <96>; + target-module@48056000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "dma"; + reg = <0x48056000 0x4>, + <0x4805602c 0x4>, + <0x48056028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = , + , + ; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */ + clocks = <&core_l3_ick>; + clock-names = "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48056000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap3430-sdma", "ti,omap-sdma"; + reg = <0x0 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <96>; + }; }; gpio1: gpio@48310000 { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index c618cb257d00..71f3c8f1f924 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -223,6 +223,10 @@ thermal_zones: thermal-zones { }; }; +&sdma { + compatible = "ti,omap3630-sdma", "ti,omap-sdma"; +}; + /* OMAP3630 needs dss_96m_fck for VENC */ &venc { clocks = <&dss_tv_fck>, <&dss_96m_fck>; From f60c41257fa06d496c9653d3f77d34b7426d9274 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:09 -0800 Subject: [PATCH 12/24] ARM: dts: Configure interconnect target module for am4 qspi We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Jean Pihet Acked-by: Jean Pihet Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 38 ++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ca0aa3f26c0a..d0478530515b 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -305,17 +305,35 @@ gpmc: gpmc@50000000 { status = "disabled"; }; - qspi: spi@47900000 { - compatible = "ti,am4372-qspi"; - reg = <0x47900000 0x100>, - <0x30000000 0x4000000>; - reg-names = "qspi_base", "qspi_mmap"; - #address-cells = <1>; - #size-cells = <0>; + target-module@47900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "qspi"; - interrupts = <0 138 0x4>; - num-cs = <4>; - status = "disabled"; + reg = <0x47900000 0x4>, + <0x47900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = , + , + , + ; + clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x47900000 0x1000>, + <0x30000000 0x30000000 0x4000000>; + + qspi: spi@0 { + compatible = "ti,am4372-qspi"; + reg = <0 0x100>, + <0x30000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + clocks = <&dpll_per_m2_div4_ck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 138 0x4>; + num-cs = <4>; + }; }; dss: dss@4832a000 { From e36afc29ea98319247c3a33ff8d3590d00b5414e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:14 -0800 Subject: [PATCH 13/24] ARM: dts: Configure interconnect target module for am3 sham We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. I could not find any documentation for the sysc register on this one, but it seems to work just fine with "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy Cc: Tero Kristo Tested-by: Tero Kristo Reviewed-by: Tero Kristo Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 646f11430dad..0d7323b235ae 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -439,13 +439,33 @@ gpmc: gpmc@50000000 { status = "disabled"; }; - sham: sham@53100000 { - compatible = "ti,omap4-sham"; + sham_target: target-module@53100000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; ti,hwmods = "sham"; - reg = <0x53100000 0x200>; - interrupts = <109>; - dmas = <&edma 36 0>; - dma-names = "rx"; + reg = <0x53100100 0x4>, + <0x53100110 0x4>, + <0x53100114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53100000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap4-sham"; + reg = <0 0x200>; + interrupts = <109>; + dmas = <&edma 36 0>; + dma-names = "rx"; + }; }; aes: aes@53500000 { From ed8e44dfa75762218368717a6a37b3b2bbdc5efd Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:14 -0800 Subject: [PATCH 14/24] ARM: dts: Configure interconnect target module for am4 sham We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Similar to am3, I could not find any documentation for the sysc register on this one, but it seems to work just fine based on "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy Cc: Tero Kristo Tested-by: Tero Kristo Reviewed-by: Tero Kristo Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d0478530515b..4496f767c7a4 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -256,13 +256,33 @@ mmc3: mmc@0 { }; }; - sham: sham@53100000 { - compatible = "ti,omap5-sham"; + sham_target: target-module@53100000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; ti,hwmods = "sham"; - reg = <0x53100000 0x300>; - dmas = <&edma 36 0>; - dma-names = "rx"; - interrupts = ; + reg = <0x53100100 0x4>, + <0x53100110 0x4>, + <0x53100114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53100000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap5-sham"; + reg = <0 0x300>; + dmas = <&edma 36 0>; + dma-names = "rx"; + interrupts = ; + }; }; aes: aes@53501000 { From e132681cef0aedf0a10858bc8cca74a0e9338025 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:15 -0800 Subject: [PATCH 15/24] ARM: dts: Configure interconnect target module for dra7 sham We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Similar to am3, I could not find any documentation for the sysc register on this one, but it seems to work just fine based on "ti,sysc-omap3-sham" compatible style configuration. Cc: Keerthy Cc: Tero Kristo Tested-by: Tero Kristo Reviewed-by: Tero Kristo Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 34 +++++++++++++++++++++++++++------- 1 file changed, 27 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 73e5011f531a..bf8c10053b04 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -685,15 +685,35 @@ des: des@480a5000 { clock-names = "fck"; }; - sham: sham@53100000 { - compatible = "ti,omap5-sham"; + sham_target: target-module@4b101000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; ti,hwmods = "sham"; - reg = <0x4b101000 0x300>; - interrupts = ; - dmas = <&edma_xbar 119 0>; - dma-names = "rx"; - clocks = <&l3_iclk_div>; + reg = <0x4b101100 0x4>, + <0x4b101110 0x4>, + <0x4b101114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b101000 0x1000>; + + sham: sham@0 { + compatible = "ti,omap5-sham"; + reg = <0 0x300>; + interrupts = ; + dmas = <&edma_xbar 119 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; opp_supply_mpu: opp-supply@4a003b20 { From b4679c0544fe68361b9bbe63f0b43a2e45f6fd27 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:15 -0800 Subject: [PATCH 16/24] ARM: dts: Configure interconnect target module for am3 aes We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy Cc: Tero Kristo Tested-by: Tero Kristo Reviewed-by: Tero Kristo Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0d7323b235ae..7db9f72a03d5 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -468,14 +468,35 @@ sham: sham@0 { }; }; - aes: aes@53500000 { - compatible = "ti,omap4-aes"; + aes_target: target-module@53500000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "aes"; - reg = <0x53500000 0xa0>; - interrupts = <103>; - dmas = <&edma 6 0>, - <&edma 5 0>; - dma-names = "tx", "rx"; + reg = <0x53500080 0x4>, + <0x53500084 0x4>, + <0x53500088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53500000 0x1000>; + + aes: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = <103>; + dmas = <&edma 6 0>, + <&edma 5 0>; + dma-names = "tx", "rx"; + }; }; }; }; From e9225f22c760c6a6a04290eb4195ade079c22625 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:16 -0800 Subject: [PATCH 17/24] ARM: dts: Configure interconnect target module for am4 aes We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy Cc: Tero Kristo Tested-by: Tero Kristo Reviewed-by: Tero Kristo Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 4496f767c7a4..9c98c7b3d658 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -285,14 +285,35 @@ sham: sham@0 { }; }; - aes: aes@53501000 { - compatible = "ti,omap4-aes"; + aes_target: target-module@53501000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "aes"; - reg = <0x53501000 0xa0>; - interrupts = ; - dmas = <&edma 6 0>, - <&edma 5 0>; - dma-names = "tx", "rx"; + reg = <0x53501080 0x4>, + <0x53501084 0x4>, + <0x53501088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x53501000 0x1000>; + + aes: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&edma 6 0>, + <&edma 5 0>; + dma-names = "tx", "rx"; + }; }; des: des@53701000 { From 2ea3ce2cf6abbdc446b4742c97f6528e73b74345 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:16 -0800 Subject: [PATCH 18/24] ARM: dts: Configure interconnect target module for dra7 aes We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy Cc: Tero Kristo Tested-by: Tero Kristo Reviewed-by: Tero Kristo Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 70 +++++++++++++++++++++++++++++-------- 1 file changed, 56 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index bf8c10053b04..e591add8a4ac 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -652,26 +652,68 @@ hdmi: encoder@58060000 { }; }; - aes1: aes@4b500000 { - compatible = "ti,omap4-aes"; + aes1_target: target-module@4b500000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "aes1"; - reg = <0x4b500000 0xa0>; - interrupts = ; - dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>; - dma-names = "tx", "rx"; - clocks = <&l3_iclk_div>; + reg = <0x4b500080 0x4>, + <0x4b500084 0x4>, + <0x4b500088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b500000 0x1000>; + + aes1: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; - aes2: aes@4b700000 { - compatible = "ti,omap4-aes"; + aes2_target: target-module@4b700000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "aes2"; - reg = <0x4b700000 0xa0>; - interrupts = ; - dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>; - dma-names = "tx", "rx"; - clocks = <&l3_iclk_div>; + reg = <0x4b700080 0x4>, + <0x4b700084 0x4>, + <0x4b700088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>; clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b700000 0x1000>; + + aes2: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; des: des@480a5000 { From f6d9eb0c253b8cd38ee9d0a2bda9364338528b7e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:17 -0800 Subject: [PATCH 19/24] ARM: dts: Configure interconnect target module for am4 des We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy Cc: Tero Kristo Tested-by: Tero Kristo Reviewed-by: Tero Kristo Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 9c98c7b3d658..79a14b0ce43b 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -316,14 +316,35 @@ aes: aes@0 { }; }; - des: des@53701000 { - compatible = "ti,omap4-des"; + des_target: target-module@53701000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "des"; - reg = <0x53701000 0xa0>; - interrupts = ; - dmas = <&edma 34 0>, - <&edma 33 0>; - dma-names = "tx", "rx"; + reg = <0x53701030 0x4>, + <0x53701034 0x4>, + <0x53701038 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l3_clkdm */ + clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x53701000 0x1000>; + + des: des@0 { + compatible = "ti,omap4-des"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&edma 34 0>, + <&edma 33 0>; + dma-names = "tx", "rx"; + }; }; gpmc: gpmc@50000000 { From eabb3f5a1b4ff3994428ab6438b2422646c82033 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 12 Dec 2019 09:46:17 -0800 Subject: [PATCH 20/24] ARM: dts: Configure interconnect target module for dra7 des We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Let's configure the module, but keep the legacy "ti,hwmods" peroperty to avoid new boot time warnings. The legacy property will be removed in later patches together with the legacy platform data. Cc: Keerthy Cc: Tero Kristo Tested-by: Tero Kristo Reviewed-by: Tero Kristo Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-l4.dtsi | 32 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/dra7.dtsi | 11 ----------- 2 files changed, 32 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 7e7aa101d8a4..58fa7d3e2de8 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2044,6 +2044,38 @@ target-module@a4000 { /* 0x480a4000, ap 57 42.0 */ <0x00001000 0x000a5000 0x00001000>; }; + des_target: target-module@a5000 { /* 0x480a5000 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "des"; + reg = <0xa5030 0x4>, + <0xa5034 0x4>, + <0xa5038 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa5000 0x00001000>; + + des: des@0 { + compatible = "ti,omap4-des"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&sdma_xbar 117>, <&sdma_xbar 116>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + target-module@a8000 { /* 0x480a8000, ap 59 1a.0 */ compatible = "ti,sysc"; status = "disabled"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e591add8a4ac..a3701fd49447 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -716,17 +716,6 @@ aes2: aes@0 { }; }; - des: des@480a5000 { - compatible = "ti,omap4-des"; - ti,hwmods = "des"; - reg = <0x480a5000 0xa0>; - interrupts = ; - dmas = <&sdma_xbar 117>, <&sdma_xbar 116>; - dma-names = "tx", "rx"; - clocks = <&l3_iclk_div>; - clock-names = "fck"; - }; - sham_target: target-module@4b101000 { compatible = "ti,sysc-omap3-sham", "ti,sysc"; ti,hwmods = "sham"; From dbd2d6f9be967bda11ec1d5f1c9d2782520b1ea0 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 12 Dec 2019 14:51:18 +0200 Subject: [PATCH 21/24] ARM: dts: dra7: convert IOMMUs to use ti-sysc Convert dra7 IOMMUs to use ti-sysc instead of legacy omap-hwmod based implementation. Enable the IOMMUs also while doing this. Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 140 +++++++++++++++++++++++++++--------- 1 file changed, 108 insertions(+), 32 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index a3701fd49447..005fc7fb7806 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -377,44 +377,120 @@ dmm@4e000000 { ti,hwmods = "dmm"; }; - mmu0_dsp1: mmu@40d01000 { - compatible = "ti,dra7-dsp-iommu"; - reg = <0x40d01000 0x100>; - interrupts = ; - ti,hwmods = "mmu0_dsp1"; - #iommu-cells = <0>; - ti,syscon-mmuconfig = <&dsp1_system 0x0>; - status = "disabled"; + target-module@40d01000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x40d01000 0x4>, + <0x40d01010 0x4>, + <0x40d01014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp1 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x40d01000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu0_dsp1: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x0>; + }; }; - mmu1_dsp1: mmu@40d02000 { - compatible = "ti,dra7-dsp-iommu"; - reg = <0x40d02000 0x100>; - interrupts = ; - ti,hwmods = "mmu1_dsp1"; - #iommu-cells = <0>; - ti,syscon-mmuconfig = <&dsp1_system 0x1>; - status = "disabled"; + target-module@40d02000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x40d02000 0x4>, + <0x40d02010 0x4>, + <0x40d02014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp1 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x40d02000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu1_dsp1: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x1>; + }; }; - mmu_ipu1: mmu@58882000 { - compatible = "ti,dra7-iommu"; - reg = <0x58882000 0x100>; - interrupts = ; - ti,hwmods = "mmu_ipu1"; - #iommu-cells = <0>; - ti,iommu-bus-err-back; - status = "disabled"; + target-module@58882000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58882000 0x4>, + <0x58882010 0x4>, + <0x58882014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_ipu 2>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58882000 0x100>; + + mmu_ipu1: mmu@0 { + compatible = "ti,dra7-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; }; - mmu_ipu2: mmu@55082000 { - compatible = "ti,dra7-iommu"; - reg = <0x55082000 0x100>; - interrupts = ; - ti,hwmods = "mmu_ipu2"; - #iommu-cells = <0>; - ti,iommu-bus-err-back; - status = "disabled"; + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55082000 0x100>; + + mmu_ipu2: mmu@0 { + compatible = "ti,dra7-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; }; abb_mpu: regulator-abb-mpu { From 3e4120b9c0bfc62fe2ce6a8fdc8cdaa9acd61b19 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 12 Dec 2019 14:51:19 +0200 Subject: [PATCH 22/24] ARM: dts: dra74x: convert IOMMUs to use ti-sysc Convert dra74x IOMMUs to use ti-sysc instead of legacy omap-hwmod based implementation. Enable the IOMMUs also while doing this. Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra74x.dtsi | 71 +++++++++++++++++++++++++++-------- 1 file changed, 55 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index d1b5b76bc5a8..c5abc436ca1f 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -66,24 +66,63 @@ usb4: usb@48950000 { }; }; - mmu0_dsp2: mmu@41501000 { - compatible = "ti,dra7-dsp-iommu"; - reg = <0x41501000 0x100>; - interrupts = ; - ti,hwmods = "mmu0_dsp2"; - #iommu-cells = <0>; - ti,syscon-mmuconfig = <&dsp2_system 0x0>; - status = "disabled"; + target-module@41501000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x41501000 0x4>, + <0x41501010 0x4>, + <0x41501014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp2 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x41501000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu0_dsp2: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x0>; + }; }; - mmu1_dsp2: mmu@41502000 { - compatible = "ti,dra7-dsp-iommu"; - reg = <0x41502000 0x100>; - interrupts = ; - ti,hwmods = "mmu1_dsp2"; - #iommu-cells = <0>; - ti,syscon-mmuconfig = <&dsp2_system 0x1>; - status = "disabled"; + target-module@41502000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x41502000 0x4>, + <0x41502010 0x4>, + <0x41502014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + + clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp2 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x41502000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu1_dsp2: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x1>; + }; }; }; }; From 22f8d6649d4b185c64e9d79ace5c9b2b6a05f851 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 12 Dec 2019 14:51:20 +0200 Subject: [PATCH 23/24] ARM: dts: omap4: convert IOMMUs to use ti-sysc Convert omap4 IOMMUs to use ti-sysc instead of legacy omap-hwmod based implementation. Enable the IOMMUs also while doing this. Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-l4.dtsi | 11 ++++++--- arch/arm/boot/dts/omap4.dtsi | 43 +++++++++++++++++++++------------ 2 files changed, 36 insertions(+), 18 deletions(-) diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index 83f803be8ee2..8a76b6b86a97 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -321,7 +321,6 @@ usbhsehci: ehci@c00 { target-module@66000 { /* 0x4a066000, ap 25 26.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmu_dsp"; reg = <0x66000 0x4>, <0x66010 0x4>, <0x66014 0x4>; @@ -335,12 +334,18 @@ SYSC_OMAP2_SOFTRESET | /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */ clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; clock-names = "fck"; + resets = <&prm_tesla 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x66000 0x1000>; - /* mmu_dsp cannot be moved before reset driver */ - status = "disabled"; + mmu_dsp: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2de8a6b53de9..af901fc6e909 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -173,14 +173,6 @@ gpmc: gpmc@50000000 { #gpio-cells = <2>; }; - mmu_dsp: mmu@4a066000 { - compatible = "ti,omap4-iommu"; - reg = <0x4a066000 0x100>; - interrupts = ; - ti,hwmods = "mmu_dsp"; - #iommu-cells = <0>; - }; - target-module@52000000 { compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "iss"; @@ -206,14 +198,35 @@ target-module@52000000 { /* No child device binding, driver in staging */ }; - mmu_ipu: mmu@55082000 { - compatible = "ti,omap4-iommu"; - reg = <0x55082000 0x100>; - interrupts = ; - ti,hwmods = "mmu_ipu"; - #iommu-cells = <0>; - ti,iommu-bus-err-back; + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + ranges = <0x0 0x55082000 0x100>; + #size-cells = <1>; + #address-cells = <1>; + + mmu_ipu: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; }; + target-module@4012c000 { compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "slimbus1"; From a6c8056d2f34e8d8fec398630facb32673f23984 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 12 Dec 2019 14:51:21 +0200 Subject: [PATCH 24/24] ARM: dts: omap5: convert IOMMUs to use ti-sysc Convert omap5 IOMMUs to use ti-sysc instead of legacy omap-hwmod based implementation. Enable the IOMMUs also while doing this. Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-l4.dtsi | 11 ++++++--- arch/arm/boot/dts/omap5.dtsi | 40 +++++++++++++++++++++------------ 2 files changed, 34 insertions(+), 17 deletions(-) diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 25aacf1ba708..a29261dea3e2 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -349,7 +349,6 @@ usbhsehci: ehci@c00 { target-module@66000 { /* 0x4a066000, ap 23 0a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "mmu_dsp"; reg = <0x66000 0x4>, <0x66010 0x4>, <0x66014 0x4>; @@ -364,12 +363,18 @@ SYSC_OMAP2_SOFTRESET | /* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */ clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>; clock-names = "fck"; + resets = <&prm_dsp 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x66000 0x1000>; - /* mmu_dsp cannot be moved before reset driver */ - status = "disabled"; + mmu_dsp: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + }; }; target-module@70000 { /* 0x4a070000, ap 79 2e.0 */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 1f6ad1debc90..d0ecf54d5a23 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -186,21 +186,33 @@ gpmc: gpmc@50000000 { #gpio-cells = <2>; }; - mmu_dsp: mmu@4a066000 { - compatible = "ti,omap4-iommu"; - reg = <0x4a066000 0x100>; - interrupts = ; - ti,hwmods = "mmu_dsp"; - #iommu-cells = <0>; - }; + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + ranges = <0x0 0x55082000 0x100>; + #size-cells = <1>; + #address-cells = <1>; - mmu_ipu: mmu@55082000 { - compatible = "ti,omap4-iommu"; - reg = <0x55082000 0x100>; - interrupts = ; - ti,hwmods = "mmu_ipu"; - #iommu-cells = <0>; - ti,iommu-bus-err-back; + mmu_ipu: mmu@0 { + compatible = "ti,omap4-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; }; dmm@4e000000 {