From 925c87109b2beb0b10f15714fcea02c3d9c15de6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 22 Dec 2015 23:35:00 +0100 Subject: [PATCH 01/34] ARM: dts: sun4i: Add touchscreen node to inet9f-rev03 tablet dts file Add a node describing the focaltech ft5406ee8 touchscreen found on inet-9f-rev03 / qware qw tb-g100 tablets. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index ca49b0d0ce1e..bba4f9cf9bf5 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -253,6 +253,15 @@ &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &lradc { From 75313a075e787495234b5c7bc3dcbf57c69cf162 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 22 Dec 2015 23:35:01 +0100 Subject: [PATCH 02/34] ARM: dts: sun4i: Add touchscreen node to chuwi-v7 dts file Add a node describing the focaltech ft5306de4 touchscreen found on chuwi-v7-cw0825 tablets. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 53660894ea95..023b03efa5ff 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include #include +#include / { model = "Chuwi V7 CW0825"; @@ -88,6 +89,15 @@ &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5306de4: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; }; &lradc { From 1b4dcd01f72f64a8a7db666a309a0afd00fe8a11 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 22 Dec 2015 23:35:02 +0100 Subject: [PATCH 03/34] ARM: dts: sun4i: Add touchscreen node to inet97fv2 dts file Add a node describing the focaltech ft5306de4 touchscreen found on inet97fv2 tablets. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 77c31dab86b1..04b0d2d1ae6c 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -48,6 +48,7 @@ #include #include +#include / { model = "INet-97F Rev 02"; @@ -93,6 +94,15 @@ &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + ft5406ee8: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; }; &lradc { From 7c929aa6e34eb8efd886df1cae62adb825f608a1 Mon Sep 17 00:00:00 2001 From: Vishnu Patekar Date: Wed, 6 Jan 2016 21:11:53 +0800 Subject: [PATCH 04/34] ARM: dts: sun8i: Add Allwinner A83T dtsi Allwinner A83T is new octa-core cortex-a7 SOC. This adds the basic dtsi, the clocks differs from earlier sun8i SOCs. Signed-off-by: Vishnu Patekar [Maxime: Removed empty chosen node] Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 198 ++++++++++++++++++++++++++++++ 1 file changed, 198 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-a83t.dtsi diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi new file mode 100644 index 000000000000..bad5df7175b4 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -0,0 +1,198 @@ +/* + * Copyright 2015 Vishnu Patekar + * + * Vishnu Patekar + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + + */ + +#include "skeleton.dtsi" + +#include + +#include + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + + cpu@100 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu@101 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu@102 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu@103 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a83t-pinctrl"; + interrupts = , + , + ; + reg = <0x01c20800 0x400>; + clocks = <&osc24M>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB9", "PB10"; + allwinner,function = "uart0"; + allwinner,drive = ; + allwinner,pull = ; + }; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc24M>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + }; +}; From b9c34584d74606731eb2c7131f179a96f8194700 Mon Sep 17 00:00:00 2001 From: Vishnu Patekar Date: Wed, 6 Jan 2016 21:11:54 +0800 Subject: [PATCH 05/34] ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner. It has UART, ethernet, USB, HDMI, etc ports on it. A83T patches are tested on this board. It has UART, ethernet, USB, HDMI, etc ports on it. For FEL mode it needs USB A-A(Male) cable. I used uart0 which is multiplexed to microsd pins PF2 and PF4. Enabled UART0 Header(PB9, PB10 pins). Signed-off-by: Vishnu Patekar Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + .../dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 64 +++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a4a6d70e8b26..884ef92bb4cc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -691,6 +691,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-ippo-q8h-v1.2.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ + sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts new file mode 100644 index 000000000000..342e1d33fa1c --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Allwinner A83T H8Homlet Proto Dev Board v2.0"; + compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; From 85c19acf578243b7f9d349cb4e24e113661e9990 Mon Sep 17 00:00:00 2001 From: Vishnu Patekar Date: Sun, 17 Jan 2016 00:24:55 +0800 Subject: [PATCH 06/34] ARM: dts: sun8i: Enable timer node for A83T A83T timer is compatible with that of earlier SOCs. Just add timer node to enable and re-use it. Signed-off-by: Vishnu Patekar Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index bad5df7175b4..08df5598df9c 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -174,6 +174,14 @@ uart0_pins_b: uart0@1 { }; }; + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = , + ; + clocks = <&osc24M>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; From b1dc902fdaec1cba1b1c8300cffecc515d126753 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 17 Jan 2016 00:24:56 +0800 Subject: [PATCH 07/34] ARM: dts: sun8i: Add watchdog device node for A83T The A83T, like previous Allwinner SoCs, has a watchdog as part of its timer block. Add a device node for it. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 08df5598df9c..8d27b6381257 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -182,6 +182,13 @@ timer@01c20c00 { clocks = <&osc24M>; }; + watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = ; + clocks = <&osc24M>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; From ac6e4349b36a0a986d21b9f700ef1c727b8790d3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 17 Jan 2016 00:24:57 +0800 Subject: [PATCH 08/34] ARM: dts: sun8i: Add device tree for Cubietruck Plus Cubietruck Plus is a A83T/H8 based development board. The board has standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet, WiFi, headphone out / mic in, and various GPIO headers. The board also has an EEPROM on i2c0 which holds the MAC address. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/sun8i-a83t-cubietruck-plus.dts | 65 +++++++++++++++++++ 2 files changed, 66 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 884ef92bb4cc..e062fb36ca5b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -692,6 +692,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ + sun8i-a83t-cubietruck-plus.dtb \ sun8i-h3-orangepi-plus.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644 index 000000000000..88b1e0970b8d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Cubietech Cubietruck Plus"; + compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; From db30fce1eea58e50ae8b2722704b4f529c394dba Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 25 Nov 2015 16:39:04 +0100 Subject: [PATCH 09/34] ARM: sun5i: chip: Add CPU regulator for cpufreq The current DT doesn't have a phandle to the CPU regulator in the CPU node, which disables the CPU voltage scaling entirely. Add that phandle. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-r8-chip.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index 530ab28e9ca2..f6898c6b84d4 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -70,6 +70,10 @@ &codec { status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; From 74124439b93065c35b840f381bb26f61452c18e5 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 21 Jan 2016 13:26:38 +0800 Subject: [PATCH 10/34] ARM: dts: sun8i: sina33: Enable hardware reset and HS-DDR for eMMC mmc2 has a special pin for eMMC hardware reset, which is controllable from the controller. Add the "mmc-cap-hw-reset" property to denote that this controller supports this function, and the pins are actually used. Also increase the signal drive strength for mmc2 pins, for HS-DDR mode support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 13ce68f06dd6..bd2a3beb4629 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -109,10 +109,13 @@ &mmc2 { vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; &mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = ; /* eMMC is missing pull-ups */ allwinner,pull = ; }; From 3a95221352a99d2dda7fc4890f70481abef22766 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 21 Jan 2016 13:26:39 +0800 Subject: [PATCH 11/34] ARM: dts: sun9i: Use sun9i specific mmc compatible sun9i/A80 MMC controllers have a larger FIFO, and the FIFO DMA trigger levels can be increased. Also, the mmc module clock parent has a higher clock rate, and the sample and output delay phases are different. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index e838f206f2a0..f4f61b02be1a 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -543,7 +543,7 @@ usbphy3: phy@00a02800 { }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, <&mmc0_clk 1>, <&mmc0_clk 2>; @@ -557,7 +557,7 @@ mmc0: mmc@01c0f000 { }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, <&mmc1_clk 1>, <&mmc1_clk 2>; @@ -571,7 +571,7 @@ mmc1: mmc@01c10000 { }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, <&mmc2_clk 1>, <&mmc2_clk 2>; @@ -585,7 +585,7 @@ mmc2: mmc@01c11000 { }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, <&mmc3_clk 1>, <&mmc3_clk 2>; From a22f8b22a9496396d7a8512225dace208645e04c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 21 Jan 2016 13:26:35 +0800 Subject: [PATCH 12/34] ARM: dts: sun6i: Add mmc3 pins for 8 bit emmc mmc2 and mmc3 are available on the same pins, with different mux values. However, only mmc3 supports 8 bit DDR transfer modes. Since preference for mmc3 over mmc2 is due to DDR transfer modes, just set the drive strength to 40mA, which is needed for DDR. This pinmux setting also includes the hardware reset pin for emmc. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index b6ad7850fac6..1867af24ff52 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -709,6 +709,16 @@ mmc2_8bit_emmc_pins: mmc2@1 { allwinner,pull = ; }; + mmc3_8bit_emmc_pins: mmc3@1 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + allwinner,function = "mmc3"; + allwinner,drive = ; + allwinner,pull = ; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", From 9fc1db1b7e4d9fc254968b1e0340732a60fba0a6 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 21 Jan 2016 13:26:36 +0800 Subject: [PATCH 13/34] ARM: dts: sun6i: sina31s: Switch to mmc3 for onboard eMMC According to Allwinner, only mmc3 supports 8 bit DDR transfers for eMMC. Switch to mmc3 for the onboard eMMC, and also assign vqmmc for signal voltage sensing, and "cap-mmc-hw-reset" to denote this instance can use eMMC hardware reset. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index ea69fb8ad4d8..4ec0c8679b2e 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -61,12 +61,14 @@ &cpu0 { }; /* eMMC on core board */ -&mmc2 { +&mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_emmc_pins>; + pinctrl-0 = <&mmc3_8bit_emmc_pins>; vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; From 3b5d8dce4c0b063962b409bb0b1db84f3a4e8410 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 21 Jan 2016 13:26:37 +0800 Subject: [PATCH 14/34] ARM: dts: sun8i: Include SDC2_RST pin in mmc2_8bit_pins mmc2_8bit_pins is used with eMMC chips, which also have a reset pin. The MMC controller also has a reset output that is supported. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 6f88fb0ddbc7..7e05e09e61c7 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -381,7 +381,7 @@ mmc2_8bit_pins: mmc2_8bit { allwinner,pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", - "PC15"; + "PC15", "PC16"; allwinner,function = "mmc2"; allwinner,drive = ; allwinner,pull = ; From 675ec62b08480fe1250c70cba61ad6e74652ed6f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 21 Jan 2016 13:26:40 +0800 Subject: [PATCH 15/34] ARM: dts: sun9i: Include SDC2_RST pin in mmc2_8bit_pins mmc2_8bit_pins is used with eMMC chips, which also have a reset pin. The MMC controller also has a reset output that is supported. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index f4f61b02be1a..f68b3242b33a 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -704,7 +704,8 @@ mmc0_pins: mmc0 { mmc2_8bit_pins: mmc2_8bit { allwinner,pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15"; + "PC13", "PC14", "PC15", + "PC16"; allwinner,function = "mmc2"; allwinner,drive = ; allwinner,pull = ; From 02df9cb85e156924339f2244aec29dcc37d9ab8c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 21 Jan 2016 13:26:41 +0800 Subject: [PATCH 16/34] ARM: dts: sun9i: a80-optimus: Enable hardware reset and HS-DDR for eMMC mmc2 has a special pin for eMMC hardware reset, which is controllable from the controller. Add the "mmc-cap-hw-reset" property to denote that this controller supports this function, and the pins are actually used. Also increase the signal drive strength for mmc2 pins, for HS-DDR mode support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index c0060e4f7379..958160e40fd0 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -174,9 +174,15 @@ &mmc2 { vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = ; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_optimus>; gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ From 8826532c76da7e6f157aa319dbf358c067f5877f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 21 Jan 2016 13:26:42 +0800 Subject: [PATCH 17/34] ARM: dts: sun9i: cubieboard4: Enable hardware reset and HS-DDR for eMMC mmc2 has a special pin for eMMC hardware reset, which is controllable from the controller. Add the "mmc-cap-hw-reset" property to denote that this controller supports this function, and the pins are actually used. Also increase the signal drive strength for mmc2 pins, for HS-DDR mode support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 382bd9fc5647..eb2ccd0a3bd5 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -111,9 +111,15 @@ &mmc2 { vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = ; +}; + &r_ir { status = "okay"; }; From 7c1639e73bc9012a7f66476623836174a3e4763c Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Sat, 23 Jan 2016 16:18:17 +0100 Subject: [PATCH 18/34] ARM: dts: sunxi: Add sunxi-itead-core-common.dtsi Itead have a core module board that can be populated with either an Allwinner A10 or A20 SoC. This patch creates a common dtsi which these boards can use. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard --- .../arm/boot/dts/sunxi-itead-core-common.dtsi | 136 ++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 arch/arm/boot/dts/sunxi-itead-core-common.dtsi diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi new file mode 100644 index 000000000000..2565d5137a17 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi @@ -0,0 +1,136 @@ +/* + * Copyright 2015 - Marcus Cooper + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-common-regulators.dtsi" + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; From d27415d4662386e1c81076957abca1788c3ff90b Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Sat, 23 Jan 2016 16:18:18 +0100 Subject: [PATCH 19/34] ARM: dts: sun7i: Add Itead Ibox support The Itead Ibox is a multi board device based on the Allwinner A20 SoC. It contains the A20 Itead Core module and a base board for the external interfaces. The core module comes with 4GB NAND and 1GB DDR RAM. The base board to which the core board is connected provides 3 USB 2.0 Host ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet port, HDMI, IR receiver, SPDIF and a 32-pin GPIO header. This header expands the features of core board by exposing the VGA pins, audio In/Out pins, SATA, SPI, I2C, UARTS, USB-OTG and power. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-itead-ibox.dts | 125 +++++++++++++++++++++ 2 files changed, 126 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-itead-ibox.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e062fb36ca5b..58e461a038e8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -666,6 +666,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-hummingbird.dtb \ + sun7i-a20-itead-ibox.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ sun7i-a20-m3.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts new file mode 100644 index 000000000000..661c21d9bdbd --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 - Marcus Cooper + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-itead-core-common.dtsi" + +/ { + model = "Itead Ibox A20"; + compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_itead_core>; + + green { + label = "itead_core:green:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + blue { + label = "itead_core:blue:usr"; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + axp209: pmic@34 { + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_itead_core: led_pins@0 { + allwinner,pins = "PH20","PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_ahci_5v { + status = "okay"; +}; From deb74a24eb02aa7ae40b4be6fae0add522d3f7bb Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Sat, 23 Jan 2016 16:18:19 +0100 Subject: [PATCH 20/34] ARM: dts: sun4i: Itead Iteaduino to use common code Convert the Itead Iteaduino A10 to use the new common itead core dtsi. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard --- .../dts/sun4i-a10-itead-iteaduino-plus.dts | 86 +------------------ 1 file changed, 2 insertions(+), 84 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index 985e15503378..4e798f014c99 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -1,5 +1,6 @@ /* * Copyright 2015 Josef Gajdusek + * Copyright 2015 - Marcus Cooper * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,22 +43,11 @@ /dts-v1/; #include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include +#include "sunxi-itead-core-common.dtsi" / { model = "Iteaduino Plus A10"; compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ahci { @@ -65,18 +55,6 @@ &ahci { status = "okay"; }; -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -89,12 +67,7 @@ &emac_sram { }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - axp209: pmic@34 { - reg = <0x34>; interrupts = <0>; }; }; @@ -135,68 +108,13 @@ &mmc0 { status = "okay"; }; -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - ®_ahci_5v { status = "okay"; }; -#include "axp209.dtsi" - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins_a>, <&spi0_cs0_pins_a>; status = "okay"; }; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; From 6b279560dd38ac66f3e65fd586cef37f5c2ae624 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 1 Feb 2016 22:59:58 +0800 Subject: [PATCH 21/34] ARM: dts: sun9i: a80-optimus: Remove i2c3 and uart4 i2c3 and uart4 are available on the GPIO header. Though these pins only have this one special function, the user may choose to use them as GPIOs instead. Since our policy is not to choose what function to present on the GPIO headers of development boards, remove them. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 958160e40fd0..d7a20d92b114 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -109,17 +109,6 @@ &ehci2 { status = "okay"; }; -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; -}; - -&i2c3_pins_a { - /* Enable internal pull-up */ - allwinner,pull = ; -}; - &ohci0 { status = "okay"; }; @@ -212,17 +201,6 @@ &uart0 { status = "okay"; }; -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&uart4_pins_a { - /* Enable internal pull-up */ - allwinner,pull = ; -}; - &usbphy1 { phy-supply = <®_usb1_vbus>; status = "okay"; From c5dee34e5c124381d3c2c5052c1c891e914543b3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 31 Jan 2016 09:20:58 +0800 Subject: [PATCH 22/34] ARM: dts: sun8i-a83t: Correct low speed oscillator clocks The A83T does not have a 32.768 kHz low speed oscillator, either as an external crystal or input. It has a 16 MHz RC-based (inaccurate) internal oscillator, which is then divided by 512 for a clock close to 32 kHz. Signed-off-by: Chen-Yu Tsai Signed-off-by: Vishnu Patekar Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 8d27b6381257..d3473f81b12f 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -118,6 +118,7 @@ clocks { #size-cells = <1>; ranges; + /* TODO: PRCM block has a mux for this. */ osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -125,11 +126,25 @@ osc24M: osc24M_clk { clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + /* + * This is called "internal OSC" in some places. + * It is an internal RC-based oscillator. + * TODO: Its controls are in the PRCM block. + */ + osc16M: osc16M_clk { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-frequency = <16000000>; + clock-output-names = "osc16M"; + }; + + osc16Md512: osc16Md512_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <512>; + clock-mult = <1>; + clocks = <&osc16M>; + clock-output-names = "osc16M-d512"; }; }; From 5bcaf95c26194d1d504f9d0bbd3bf08db2ff7ef6 Mon Sep 17 00:00:00 2001 From: Krzysztof Adamski Date: Mon, 8 Feb 2016 10:31:14 +0100 Subject: [PATCH 23/34] ARM: dts: sunxi: Fix #interrupt-cells for PIO in H3 pinctrl-sunxi uses 3 cells to describe interrupt, not 2. It's bank number, pin number and flags. Signed-off-by: Krzysztof Adamski Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 1524130e43c9..3ba65c2b53e5 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -359,7 +359,7 @@ pio: pinctrl@01c20800 { gpio-controller; #gpio-cells = <3>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; uart0_pins_a: uart0@0 { allwinner,pins = "PA4", "PA5"; From bd10bce87820fa3af9ee160c31723958af7df0ba Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Tue, 9 Feb 2016 10:25:32 +0100 Subject: [PATCH 24/34] ARM: dts: sun7i: Enable USB DRC on MK808C Enable the otg/drc usb controller on the MK808C. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede --- arch/arm/boot/dts/sun7i-a20-mk808c.dts | 35 ++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index c9e648d17a1e..90ff4a267025 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -53,6 +53,7 @@ #include #include +#include / { model = "mk808c"; @@ -125,6 +126,30 @@ &ohci1 { status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -145,7 +170,17 @@ &uart2 { status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; From d3e84a93184137951241f71f8696bddc8b32b36c Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Tue, 9 Feb 2016 10:33:28 +0100 Subject: [PATCH 25/34] ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB Enable the otg/drc usb controller on the Olimex A20 EVB. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede --- .../arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index c3c626b2cfa2..23aacce4d6c7 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -198,6 +198,10 @@ &ohci1 { status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -219,6 +223,20 @@ mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { allwinner,drive = ; allwinner,pull = ; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; }; ®_ahci_5v { @@ -254,6 +272,10 @@ ®_ldo2 { regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -268,7 +290,17 @@ &uart0 { status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; From 5c61f02c1270982bcecccca51a01fb363c20d2cd Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 12 Feb 2016 10:02:46 +0800 Subject: [PATCH 26/34] ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes This board has a X-Powers AXP223 PMIC connected via RSB. Its regulators provide power to various parts of the SoC and the board. Also update the regulator supply phandles. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- .../arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 76 ++++++++++++++++++- 1 file changed, 73 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index bd2a3beb4629..fef6abc0a703 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -68,7 +68,7 @@ &ehci0 { }; &lradc { - vref-supply = <®_vcc3v0>; + vref-supply = <®_dcdc1>; status = "okay"; button@200 { @@ -96,7 +96,7 @@ button@600 { &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -106,7 +106,7 @@ &mmc0 { &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -135,6 +135,76 @@ mmc0_cd_pin_sina33: mmc0_cd_pin@0 { &r_rsb { status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; &uart0 { From 8f60ef5b88924817251d0cbbaeab8c3c33d18692 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 12 Feb 2016 10:02:47 +0800 Subject: [PATCH 27/34] ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes A23/A33 Q8 tablets have an X-Powers AXP223 PMIC connected via RSB. Its regulators provide power to various parts of the SoC and the board. Also add lcd regulator supply for simplefb and update the existing vmmc-supply for mmc0. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-q8-common.dtsi | 83 +++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 1a69231d2da5..9d2b7e2f5975 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -56,7 +56,6 @@ backlight: backlight { brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - /* backlight is powered by AXP223 DC1SW */ }; chosen { @@ -67,7 +66,7 @@ chosen { &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; @@ -92,6 +91,82 @@ mmc0_cd_pin_q8: mmc0_cd_pin@0 { &r_rsb { status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; }; &r_uart { @@ -99,3 +174,7 @@ &r_uart { pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; From 0bbdcd03ea97b842e29930f073f9bdd89c62fde8 Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Fri, 12 Feb 2016 12:59:19 +0100 Subject: [PATCH 28/34] ARM: dts: sun4i: Enable USB DRC on the MK802 Enable the otg/drc usb controller on the MK802. Signed-off-by: Marcus Cooper Reviewed-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-mk802.dts | 33 +++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index ddf0683cbc6a..ee46ea854832 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -44,6 +44,7 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" #include +#include / { model = "MK802"; @@ -84,7 +85,25 @@ &ohci0 { status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + usb2_vbus_pin_mk802: usb2_vbus_pin@0 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; @@ -93,6 +112,10 @@ usb2_vbus_pin_mk802: usb2_vbus_pin@0 { }; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -109,7 +132,17 @@ &uart0 { status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; From cb3cae9aa16da53da48ea6d7722f2579dd33608e Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 16 Feb 2016 22:00:04 +0100 Subject: [PATCH 29/34] ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd Enable the OTG USB controller on the A7HD. Signed-off-by: Peter Korsgaard Reviewed-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 34 ++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 43f58fbe161c..9103864fef90 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -87,6 +87,30 @@ &mmc0 { status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb2_vbus { gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ status = "okay"; @@ -102,7 +126,17 @@ &usb2_vbus_pin_a { allwinner,pins = "PH6"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; From f9ca30440c0866a1cb0ecb68604fdad3a108f9fb Mon Sep 17 00:00:00 2001 From: Jelle de Jong Date: Tue, 23 Feb 2016 23:12:43 +0100 Subject: [PATCH 30/34] ARM: dts: sun7i: Add dts file for the lamobo-r1 board The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. Signed-off-by: Jelle de Jong Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 287 ++++++++++++++++++++++ 2 files changed, 288 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 58e461a038e8..309cce56c7e7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -669,6 +669,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-itead-ibox.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ + sun7i-a20-lamobo-r1.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts new file mode 100644 index 000000000000..5ee43d8bf174 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -0,0 +1,287 @@ +/* + * Copyright 2015 Jelle de Jong + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Lamobo R1"; + compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart3; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_lamobo_r1>; + + green { + label = "lamobo_r1:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_lamobo_r1>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci_pwr_pin_a { + allwinner,pins = "PB3"; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + gmac_power_pin_lamobo_r1: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_lamobo_r1: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +#include "axp209.dtsi" + +®_ahci_5v { + gpio = <&pio 1 3 0>; /* PB3 */ + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; From 097872945ea6b70707772eea520c4e273a9c7321 Mon Sep 17 00:00:00 2001 From: Krzysztof Adamski Date: Mon, 22 Feb 2016 14:03:26 +0100 Subject: [PATCH 31/34] dts: sun8i-h3: Add APB0 related clocks and resets APB0 is bearly mentioned in H3 User Manual and it is only setup in the Allwinners kernel dump for CIR. I have verified experimentally that the gate for R_PIO exists and works, though. There are probably other gates there but I don't know their order right now and I don't have access to their peripherals on my board to test them. After some experiments and reviewing how this is organized on other sunxi SoCs, I couldn't actually find any way to disable clocks for R_PIO and they are working properly without doing anything so I assume they are connected straight to the 24Mhz oscillator for now. Signed-off-by: Krzysztof Adamski Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 3ba65c2b53e5..1348b69c36c2 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -276,6 +276,25 @@ mbus_clk: clk@01c2015c { clocks = <&osc24M>, <&pll6 1>, <&pll5>; clock-output-names = "mbus"; }; + + apb0: apb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01f01428 { + compatible = "allwinner,sun8i-h3-apb0-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01f01428 0x4>; + #clock-cells = <1>; + clocks = <&apb0>; + clock-indices = <0>, <1>; + clock-output-names = "apb0_pio", "apb0_ir"; + }; }; soc { @@ -493,5 +512,11 @@ rtc: rtc@01f00000 { interrupts = , ; }; + + apb0_reset: reset@01f014b0 { + reg = <0x01f014b0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; }; }; From 9338536731d128cb623d6bc6e71edc368f1b17b8 Mon Sep 17 00:00:00 2001 From: Krzysztof Adamski Date: Mon, 22 Feb 2016 14:03:27 +0100 Subject: [PATCH 32/34] ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi Add the corresponding device node for R_PIO on H3 to the dtsi. Support for the controller was added in earlier commit. Signed-off-by: Krzysztof Adamski Acked-by: Linus Walleij Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 1348b69c36c2..c3b73d7f074d 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -518,5 +518,17 @@ apb0_reset: reset@01f014b0 { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = ; + clocks = <&apb0_gates 0>; + resets = <&apb0_reset 0>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + }; }; }; From fe0a8ea1fb0b736c84ea763fcc30fffaed4efd14 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 24 Feb 2016 00:03:16 +0100 Subject: [PATCH 33/34] ARM: dts: sun8i: Add ir receiver nodes to H3 dtsi The H3 ir receiver is completely compatible with the one found in the A31. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index c3b73d7f074d..dadb7f60c062 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -295,6 +295,14 @@ apb0_gates: clk@01f01428 { clock-indices = <0>, <1>; clock-output-names = "apb0_pio", "apb0_ir"; }; + + ir_clk: ir_clk@01f01454 { + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01f01454 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; }; soc { @@ -519,6 +527,16 @@ apb0_reset: reset@01f014b0 { #reset-cells = <1>; }; + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_reset 1>; + interrupts = ; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + r_pio: pinctrl@01f02c00 { compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -529,6 +547,13 @@ r_pio: pinctrl@01f02c00 { #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; + + ir_pins_a: ir@0 { + allwinner,pins = "PL11"; + allwinner,function = "s_cir_rx"; + allwinner,drive = ; + allwinner,pull = ; + }; }; }; }; From d250d17d4f9b2d3d14d20cf6c70da8da7676848b Mon Sep 17 00:00:00 2001 From: Krzysztof Adamski Date: Thu, 25 Feb 2016 21:42:35 +0100 Subject: [PATCH 34/34] ARM: dts: sun8i: Add leds and switch on Orangepi Plus boards OrangePi Plus board has dwo leds - green ("pwr") and red ("status") and a switch ("sw4"). This patch describes them in a devicetree. Signed-off-by: Krzysztof Adamski Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 57 ++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index e67df590535f..79f40c3e6101 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include +#include #include / { @@ -58,6 +59,62 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + status_led { + label = "orangepi-plus:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + + pwr_led { + label = "orangepi-plus:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + input-name = "sw4"; + + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw4@0 { + label = "sw4"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL03"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; }; &mmc0 {