diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 3d7e0230dc03..5e314d8dba91 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "x1e80100.dtsi"
@@ -23,6 +24,21 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
 	pmic-glink {
 		compatible = "qcom,x1e80100-pmic-glink",
 			     "qcom,sm8550-pmic-glink",
@@ -819,6 +835,28 @@ edp_reg_en: edp-reg-en-state {
 		bias-disable;
 	};
 
+	hall_int_n_default: hall-int-n-state {
+		lid-n-pins {
+			pins = "gpio92";
+			function = "gpio";
+			bias-disable;
+		};
+
+		/*
+		 * Pins 71 and 92 seem to be bridged together (pin 71 and 92 show the same
+		 * events). By default, pin 71 is set as output-high, which blocks any
+		 * event on pin 92. Output-disable on pin 71 is necessary to get events on
+		 * pin 92.
+		 * The purpose of pin 71 is not yet known; lid-pull is a supposition.
+		 */
+		lid-pull-n-pins {
+			pins = "gpio71";
+			function = "gpio";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+
 	kybd_default: kybd-default-state {
 		pins = "gpio67";
 		function = "gpio";