diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 64fc00ade5ca..741704203e52 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -802,7 +802,7 @@ config SENSORS_GXP_FAN_CTRL
 	  If you say yes here you get support for GXP fan control functionality.
 
 	  The GXP controls fan function via the CPLD through the use of PWM
-	  registers. This driver reports status and pwm setting of the fans.
+	  registers. This driver enables pwm setting of the fans.
 
 config SENSORS_HIH6130
 	tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
diff --git a/drivers/hwmon/gxp-fan-ctrl.c b/drivers/hwmon/gxp-fan-ctrl.c
index 86e7bafd3a38..64f85d7e748e 100644
--- a/drivers/hwmon/gxp-fan-ctrl.c
+++ b/drivers/hwmon/gxp-fan-ctrl.c
@@ -1,59 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+/* Copyright (C) 2023 Hewlett-Packard Enterprise Development Company, L.P. */
 
-#include <linux/bits.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#define OFS_FAN_INST	0 /* Is 0 because plreg base will be set at INST */
-#define OFS_FAN_FAIL	2 /* Is 2 bytes after base */
-#define OFS_SEVSTAT	0 /* Is 0 because fn2 base will be set at SEVSTAT */
-#define POWER_BIT	24
-
 struct gxp_fan_ctrl_drvdata {
 	void __iomem	*base;
-	void __iomem	*plreg;
-	void __iomem	*fn2;
 };
 
-static bool fan_installed(struct device *dev, int fan)
-{
-	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
-	u8 val;
-
-	val = readb(drvdata->plreg + OFS_FAN_INST);
-
-	return !!(val & BIT(fan));
-}
-
-static long fan_failed(struct device *dev, int fan)
-{
-	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
-	u8 val;
-
-	val = readb(drvdata->plreg + OFS_FAN_FAIL);
-
-	return !!(val & BIT(fan));
-}
-
-static long fan_enabled(struct device *dev, int fan)
-{
-	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
-	u32 val;
-
-	/*
-	 * Check the power status as if the platform is off the value
-	 * reported for the PWM will be incorrect. Report fan as
-	 * disabled.
-	 */
-	val = readl(drvdata->fn2 + OFS_SEVSTAT);
-
-	return !!((val & BIT(POWER_BIT)) && fan_installed(dev, fan));
-}
-
 static int gxp_pwm_write(struct device *dev, u32 attr, int channel, long val)
 {
 	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
@@ -80,37 +37,11 @@ static int gxp_fan_ctrl_write(struct device *dev, enum hwmon_sensor_types type,
 	}
 }
 
-static int gxp_fan_read(struct device *dev, u32 attr, int channel, long *val)
-{
-	switch (attr) {
-	case hwmon_fan_enable:
-		*val = fan_enabled(dev, channel);
-		return 0;
-	case hwmon_fan_fault:
-		*val = fan_failed(dev, channel);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
 static int gxp_pwm_read(struct device *dev, u32 attr, int channel, long *val)
 {
 	struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
-	u32 reg;
 
-	/*
-	 * Check the power status of the platform. If the platform is off
-	 * the value reported for the PWM will be incorrect. In this case
-	 * report a PWM of zero.
-	 */
-
-	reg = readl(drvdata->fn2 + OFS_SEVSTAT);
-
-	if (reg & BIT(POWER_BIT))
-		*val = fan_installed(dev, channel) ? readb(drvdata->base + channel) : 0;
-	else
-		*val = 0;
+	*val = readb(drvdata->base + channel);
 
 	return 0;
 }
@@ -119,8 +50,6 @@ static int gxp_fan_ctrl_read(struct device *dev, enum hwmon_sensor_types type,
 			     u32 attr, int channel, long *val)
 {
 	switch (type) {
-	case hwmon_fan:
-		return gxp_fan_read(dev, attr, channel, val);
 	case hwmon_pwm:
 		return gxp_pwm_read(dev, attr, channel, val);
 	default:
@@ -135,16 +64,6 @@ static umode_t gxp_fan_ctrl_is_visible(const void *_data,
 	umode_t mode = 0;
 
 	switch (type) {
-	case hwmon_fan:
-		switch (attr) {
-		case hwmon_fan_enable:
-		case hwmon_fan_fault:
-			mode = 0444;
-			break;
-		default:
-			break;
-		}
-		break;
 	case hwmon_pwm:
 		switch (attr) {
 		case hwmon_pwm_input:
@@ -168,15 +87,6 @@ static const struct hwmon_ops gxp_fan_ctrl_ops = {
 };
 
 static const struct hwmon_channel_info * const gxp_fan_ctrl_info[] = {
-	HWMON_CHANNEL_INFO(fan,
-			   HWMON_F_FAULT | HWMON_F_ENABLE,
-			   HWMON_F_FAULT | HWMON_F_ENABLE,
-			   HWMON_F_FAULT | HWMON_F_ENABLE,
-			   HWMON_F_FAULT | HWMON_F_ENABLE,
-			   HWMON_F_FAULT | HWMON_F_ENABLE,
-			   HWMON_F_FAULT | HWMON_F_ENABLE,
-			   HWMON_F_FAULT | HWMON_F_ENABLE,
-			   HWMON_F_FAULT | HWMON_F_ENABLE),
 	HWMON_CHANNEL_INFO(pwm,
 			   HWMON_PWM_INPUT,
 			   HWMON_PWM_INPUT,
@@ -211,18 +121,6 @@ static int gxp_fan_ctrl_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(drvdata->base),
 				     "failed to map base\n");
 
-	drvdata->plreg = devm_platform_ioremap_resource_byname(pdev,
-							       "pl");
-	if (IS_ERR(drvdata->plreg))
-		return dev_err_probe(dev, PTR_ERR(drvdata->plreg),
-				     "failed to map plreg\n");
-
-	drvdata->fn2 = devm_platform_ioremap_resource_byname(pdev,
-							     "fn2");
-	if (IS_ERR(drvdata->fn2))
-		return dev_err_probe(dev, PTR_ERR(drvdata->fn2),
-				     "failed to map fn2\n");
-
 	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
 							 "hpe_gxp_fan_ctrl",
 							 drvdata,