From 117c25091d73760be8faf6f7ff48fa8eb7e8c775 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 14 Jun 2021 19:06:30 +0200 Subject: [PATCH 01/27] arm64: dts: imx8mq: add Nitrogen8 SoM This adds the description of the Nitrogen8 System on Module. The module is quite simple with only a few (almost) fixed regulators and a eMMC on-board. Signed-off-by: Lucas Stach Acked-by: Rob Herring Signed-off-by: Shawn Guo --- .../dts/freescale/imx8mq-nitrogen-som.dtsi | 275 ++++++++++++++++++ 1 file changed, 275 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi new file mode 100644 index 000000000000..36fc428ebe30 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Boundary Devices + * Copyright 2021 Lucas Stach + */ + +#include "imx8mq.dtsi" + +/ { + model = "Boundary Devices i.MX8MQ Nitrogen8M"; + compatible = "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + reg_1p8v: regulator-fixed-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_snvs: regulator-fixed-snvs { + compatible = "regulator-fixed"; + regulator-name = "VDD_SNVS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&{/opp-table/opp-800000000} { + opp-microvolt = <1000000>; +}; + +&{/opp-table/opp-1000000000} { + opp-microvolt = <1000000>; +}; + +&A53_0 { + cpu-supply = <®_arm_dram>; +}; + +&A53_1 { + cpu-supply = <®_arm_dram>; +}; + +&A53_2 { + cpu-supply = <®_arm_dram>; +}; + +&A53_3 { + cpu-supply = <®_arm_dram>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_pca9546>; + reg = <0x70>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + i2c1a: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + reg_arm_dram: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "VDD_ARM_DRAM_1V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + + i2c1b: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + reg_dram_1p1v: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "NVCC_DRAM_1P1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + }; + + i2c1c: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + reg_soc_gpu_vpu: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "VDD_SOC_GPU_VPU"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + }; + + i2c1d: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&pgc_gpu { + power-supply = <®_soc_gpu_vpu>; +}; + +&pgc_vpu { + power-supply = <®_soc_gpu_vpu>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <®_1p8v>; + vmmc-supply = <®_snvs>; + bus-width = <8>; + non-removable; + no-mmc-hs400; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c1_pca9546: i2c1-pca9546grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x49 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; From d39cd936b6b741c2e8f234298a6fb5ed8baf5a46 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 14 Jun 2021 19:06:33 +0200 Subject: [PATCH 02/27] arm64: dts: imx8mq: add support for MNT Reform2 This adds a basic devicetree for the MNT Reform2 DIY laptop. Not all of the board periperals are enabled yet, as some of them still require kernel patches to work properly. The nodes for those peripherals will be added as soon as the required patches are upstream. The following has been tested to work: - UART console - SD card - eMMC - Gigabit Ethernet - USB (internal Keyboard, Mouse, external ports) - M.2 PCIe port Co-developed-by: Lukas F. Hartmann Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mq-mnt-reform2.dts | 164 ++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 25806c4924cb..4b4785d86324 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-mnt-reform2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts new file mode 100644 index 000000000000..099b0472db5d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Copyright 2019-2021 MNT Research GmbH + * Copyright 2021 Lucas Stach + */ + +/dts-v1/; + +#include "imx8mq-nitrogen-som.dtsi" + +/ { + model = "MNT Reform 2"; + compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq"; + + pcie1_refclk: clock-pcie1-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_main_5v: regulator-main-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_main_3v3: regulator-main-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_main_usb: regulator-main-usb { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_main_5v>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1>; + reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +®_1p8v { + vin-supply = <®_main_5v>; +}; + +®_snvs { + vin-supply = <®_main_5v>; +}; + +®_arm_dram { + vin-supply = <®_main_5v>; +}; + +®_dram_1p1v { + vin-supply = <®_main_5v>; +}; + +®_soc_gpu_vpu { + vin-supply = <®_main_5v>; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_main_usb>; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_main_usb>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vqmmc-supply = <®_main_3v3>; + vmmc-supply = <®_main_3v3>; + bus-width = <4>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x16 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + >; + }; +}; From 0c1ed5e704436db4b2352004f4c5e821f81c7627 Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Tue, 15 Jun 2021 19:03:35 +0300 Subject: [PATCH 03/27] arm64: dts: lx2160ardb: update PHY nodes with IRQ information Update the DTS nodes for both the AR8035 and the AQR107 PHYs in order to describe their IRQ lines. Signed-off-by: Ioana Ciornei Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 5dbf27493e8b..028ff8074b9d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -65,6 +65,7 @@ &emdio1 { rgmii_phy1: ethernet-phy@1 { /* AR8035 PHY */ compatible = "ethernet-phy-id004d.d072"; + interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; reg = <0x1>; eee-broken-1000t; }; @@ -72,6 +73,7 @@ rgmii_phy1: ethernet-phy@1 { rgmii_phy2: ethernet-phy@2 { /* AR8035 PHY */ compatible = "ethernet-phy-id004d.d072"; + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; reg = <0x2>; eee-broken-1000t; }; @@ -79,12 +81,14 @@ rgmii_phy2: ethernet-phy@2 { aquantia_phy1: ethernet-phy@4 { /* AQR107 PHY */ compatible = "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; reg = <0x4>; }; aquantia_phy2: ethernet-phy@5 { /* AQR107 PHY */ compatible = "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>; reg = <0x5>; }; }; From 915622ce17f96fdf08fd3170507bb006aadfc374 Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Tue, 15 Jun 2021 19:03:36 +0300 Subject: [PATCH 04/27] arm64: dts: ls2088ardb: update PHY nodes with IRQ information Update the DTS nodes corresponding to the 4 10GBASE-R PHYs to describe their IRQ lines. Signed-off-by: Ioana Ciornei Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index 60563917be44..3e4e857db13f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -92,21 +92,25 @@ &emdio2 { mdio2_phy1: ethernet-phy@0 { compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x0>; }; mdio2_phy2: ethernet-phy@1 { compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; reg = <0x1>; }; mdio2_phy3: ethernet-phy@2 { compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; reg = <0x2>; }; mdio2_phy4: ethernet-phy@3 { compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; reg = <0x3>; }; }; From 16fe55ba95323fe8de88b258e7f51f37b79d54b0 Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Tue, 15 Jun 2021 19:03:37 +0300 Subject: [PATCH 05/27] arm64: dts: ls1088ardb: update PHY nodes with IRQ information Describe the IRQs for both the QSGMII PHYs and the 10GBASE-R PHY found on the LS1088ARDB board. Signed-off-by: Ioana Ciornei Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index bf7b43ab1293..1bfbce69cc8b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -83,34 +83,42 @@ &emdio1 { status = "okay"; mdio1_phy5: ethernet-phy@c { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0xc>; }; mdio1_phy6: ethernet-phy@d { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0xd>; }; mdio1_phy7: ethernet-phy@e { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0xe>; }; mdio1_phy8: ethernet-phy@f { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0xf>; }; mdio1_phy1: ethernet-phy@1c { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x1c>; }; mdio1_phy2: ethernet-phy@1d { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x1d>; }; mdio1_phy3: ethernet-phy@1e { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x1e>; }; mdio1_phy4: ethernet-phy@1f { + interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>; reg = <0x1f>; }; }; @@ -120,6 +128,7 @@ &emdio2 { mdio2_aquantia_phy: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; reg = <0x0>; }; }; From d6ce0bfaf9ce8f8e58436760f8e55ef0602defad Mon Sep 17 00:00:00 2001 From: Kwon Tae-young Date: Fri, 18 Jun 2021 16:27:33 +0900 Subject: [PATCH 06/27] arm64: dts: imx8qxp-ai_ml: Fix checkpatch warnings Fix the following warnings reported by checkpatch: arch/..../imx8qxp-ai_ml.dts:198: WARNING: please, no space before tabs Signed-off-by: Kwon Tae-young Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts index 47bb68823b24..7d00e17f0447 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -195,7 +195,7 @@ pinctrl_lpuart0: lpuart0grp { fsl,pins = < IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020 IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020 - IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 >; }; From 5bb279171afc4a1617fa86f4abc1f9e75fe31db7 Mon Sep 17 00:00:00 2001 From: Mirela Rabulea Date: Sat, 19 Jun 2021 17:36:11 +0300 Subject: [PATCH 07/27] arm64: dts: imx8: Add jpeg encoder/decoder nodes Add dts for imaging subsytem, include jpeg nodes here. Tested on imx8qxp/qm. Signed-off-by: Mirela Rabulea Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 80 +++++++++++++++++++ .../boot/dts/freescale/imx8qm-ss-img.dtsi | 12 +++ arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 + .../boot/dts/freescale/imx8qxp-ss-img.dtsi | 13 +++ arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 + 5 files changed, 109 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi new file mode 100644 index 000000000000..a90654155a88 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP + * Zhou Guoniu + */ +img_subsys: bus@58000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x58000000 0x0 0x58000000 0x1000000>; + + img_ipg_clk: clock-img-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "img_ipg_clk"; + }; + + jpegdec: jpegdec@58400000 { + reg = <0x58400000 0x00050000>; + interrupts = , + , + , + ; + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <200000000>, <200000000>; + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>, + <&pd IMX_SC_R_MJPEG_DEC_S0>, + <&pd IMX_SC_R_MJPEG_DEC_S1>, + <&pd IMX_SC_R_MJPEG_DEC_S2>, + <&pd IMX_SC_R_MJPEG_DEC_S3>; + }; + + jpegenc: jpegenc@58450000 { + reg = <0x58450000 0x00050000>; + interrupts = , + , + , + ; + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; + clock-names = "per", "ipg"; + assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <200000000>, <200000000>; + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>, + <&pd IMX_SC_R_MJPEG_ENC_S0>, + <&pd IMX_SC_R_MJPEG_ENC_S1>, + <&pd IMX_SC_R_MJPEG_ENC_S2>, + <&pd IMX_SC_R_MJPEG_ENC_S3>; + }; + + img_jpeg_dec_lpcg: clock-controller@585d0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x585d0000 0x10000>; + #clock-cells = <1>; + clocks = <&img_ipg_clk>, <&img_ipg_clk>; + clock-indices = , + ; + clock-output-names = "img_jpeg_dec_lpcg_clk", + "img_jpeg_dec_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>; + }; + + img_jpeg_enc_lpcg: clock-controller@585f0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x585f0000 0x10000>; + #clock-cells = <1>; + clocks = <&img_ipg_clk>, <&img_ipg_clk>; + clock-indices = , + ; + clock-output-names = "img_jpeg_enc_lpcg_clk", + "img_jpeg_enc_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi new file mode 100644 index 000000000000..7764b4146e0a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + */ + +&jpegdec { + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; +}; + +&jpegenc { + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 12cd059b339b..aebbe2b84aa1 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -166,11 +166,13 @@ iomuxc: pinctrl { }; /* sorted in register address */ + #include "imx8-ss-img.dtsi" #include "imx8-ss-dma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-lsio.dtsi" }; +#include "imx8qm-ss-img.dtsi" #include "imx8qm-ss-dma.dtsi" #include "imx8qm-ss-conn.dtsi" #include "imx8qm-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi new file mode 100644 index 000000000000..3a087317591d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + * Dong Aisheng + */ + +&jpegdec { + compatible = "nxp,imx8qxp-jpgdec"; +}; + +&jpegenc { + compatible = "nxp,imx8qxp-jpgenc"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 1e6b4995091e..a625fb6bdc62 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -258,12 +258,14 @@ map0 { }; /* sorted in register address */ + #include "imx8-ss-img.dtsi" #include "imx8-ss-adma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" #include "imx8-ss-lsio.dtsi" }; +#include "imx8qxp-ss-img.dtsi" #include "imx8qxp-ss-adma.dtsi" #include "imx8qxp-ss-conn.dtsi" #include "imx8qxp-ss-lsio.dtsi" From d05cd0dcb4dbc54dd442ce7a7924423740bb4160 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 10 Jul 2021 09:39:41 -0300 Subject: [PATCH 08/27] arm64: dts: imx8mm-venice-gw7901: Remove unnecessary #address-cells/#size-cells The following dtc build warning is seen with W=1: arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts:291.14-397.4: Warning (avoid_unnecessary_addr_size): /soc@0/bus@30800000/i2c@30a20000/gsc@20: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Remove the unnecessary #address-cells/#size-cells to fix it. Signed-off-by: Fabio Estevam Reviewed-By: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 5a1e9df39bec..f0fe1e19ae43 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -296,8 +296,6 @@ gsc: gsc@20 { interrupts = <16 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; adc { compatible = "gw,gsc-adc"; From 7e5f3146670fadc9736c7a445a666a1c31957506 Mon Sep 17 00:00:00 2001 From: Kwon Tae-young Date: Thu, 15 Jul 2021 15:54:31 +0900 Subject: [PATCH 09/27] arm64: dts: imx8mq-evk: add CD pinctrl for usdhc2 Add CD pinctrl for usdhc2. Signed-off-by: Kwon Tae-young Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 4d2035e3dd7c..87f571d6d843 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -403,9 +403,9 @@ &usdhc2 { assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; vmmc-supply = <®_usdhc2_vmmc>; status = "okay"; @@ -565,6 +565,12 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 >; }; + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 From 5ff554dd5c241b36e9bb528c145391b465554e2d Mon Sep 17 00:00:00 2001 From: Kwon Tae-young Date: Thu, 15 Jul 2021 16:07:49 +0900 Subject: [PATCH 10/27] arm64: dts: imx8mq-evk: Remove unnecessary blank lines Unnecessary blank lines do NOT help readability, so remove them. Signed-off-by: Kwon Tae-young Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 87f571d6d843..49f9db971f3b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -423,7 +423,6 @@ pinctrl_buck2: vddarmgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 >; - }; pinctrl_fec1: fec1grp { @@ -480,7 +479,6 @@ MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 - >; }; From 78e80c4b4238c1f5642b975859664fced4f9c69e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 21 Jul 2021 18:39:55 +0200 Subject: [PATCH 11/27] arm64: dts: imx8m: Replace deprecated fsl,usbphy DT props with phys The fsl,usbphy DT property is deprecated, replace it with phys DT property and specify #phy-cells. No functional change. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: NXP Linux Team Cc: Shawn Guo To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 6 ++++-- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 3 ++- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index e7648c3b8390..ddaab25b6bdb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -241,6 +241,7 @@ map0 { }; usbphynop1: usbphynop1 { + #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; @@ -249,6 +250,7 @@ usbphynop1: usbphynop1 { }; usbphynop2: usbphynop2 { + #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; @@ -968,7 +970,7 @@ usbotg1: usb@32e40000 { clock-names = "usb1_ctrl_root_clk"; assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; - fsl,usbphy = <&usbphynop1>; + phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; status = "disabled"; }; @@ -987,7 +989,7 @@ usbotg2: usb@32e50000 { clock-names = "usb1_ctrl_root_clk"; assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; - fsl,usbphy = <&usbphynop2>; + phys = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index d4231e061403..43763d9abc84 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -971,7 +971,7 @@ usbotg1: usb@32e40000 { clock-names = "usb1_ctrl_root_clk"; assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; - fsl,usbphy = <&usbphynop1>; + phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; status = "disabled"; }; @@ -1039,6 +1039,7 @@ ddr-pmu@3d800000 { }; usbphynop1: usbphynop1 { + #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; From bc3ab388ee84812c2f217965b92fd5e1a4a712f2 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Fri, 23 Jul 2021 14:05:40 +0300 Subject: [PATCH 12/27] arm64: dts: imx8mp: Add dsp node i.MX8 MPlus SoC integrates Cadence HIFI4 DSP. This core runs either a custom firmware or the open source SOF firmware [1] DSP device is handled by SOF OF driver found in sound/soc/sof/sof-of-dev.c Notice that the DSP node makes use of: - dsp_reserved, a reserved memory region for various Audio resources (e.g firmware loading, audio buffers, etc). - Messaging Unit (mu2) for passing notifications betweem ARM core and DSP. [1] https://thesofproject.github.io/latest/platforms/index.html Signed-off-by: Daniel Baluta Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 9f7c7f587d38..2a1a4ff36c67 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -135,6 +135,17 @@ clk_ext4: clock-ext4 { clock-output-names = "clk_ext4"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; }; + mu2: mailbox@30e60000 { + compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu"; + reg = <0x30e60000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + status = "disabled"; + }; + i2c5: i2c@30ad0000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; @@ -938,5 +957,16 @@ usb_dwc3_1: usb@38200000 { snps,dis-u2-freeclk-exists-quirk; }; }; + + dsp: dsp@3b6e8000 { + compatible = "fsl,imx8mp-dsp"; + reg = <0x3b6e8000 0x88000>; + mbox-names = "txdb0", "txdb1", + "rxdb0", "rxdb1"; + mboxes = <&mu2 2 0>, <&mu2 2 1>, + <&mu2 3 0>, <&mu2 3 1>; + memory-region = <&dsp_reserved>; + status = "disabled"; + }; }; }; From ef484dfcf6f789dd6ababb6f47c6e84d87e6bd18 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Fri, 23 Jul 2021 11:41:16 -0700 Subject: [PATCH 13/27] arm64: dts: imx: Add i.mx8mm/imx8mn Gateworks gw7902 dts support The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 2 + .../dts/freescale/imx8mm-venice-gw7902.dts | 911 ++++++++++++++++++ .../dts/freescale/imx8mn-venice-gw7902.dts | 884 +++++++++++++++++ 3 files changed, 1797 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 4b4785d86324..9020350ac3e7 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -42,10 +42,12 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts new file mode 100644 index 000000000000..05cb60991fb9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -0,0 +1,911 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Gateworks Corporation + */ + +/dts-v1/; + +#include +#include +#include +#include + +#include "imx8mm.dtsi" + +/ { + model = "Gateworks Venice GW7902 i.MX8MM board"; + compatible = "gw,imx8mm-gw7902", "fsl,imx8mm"; + + aliases { + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + can20m: can20m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "can20m"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel1"; + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel2"; + gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel3"; + gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel4"; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel5"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb1_vbus: regulator-usb1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-name = "usb_usb1_vbus"; + gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + regulator-name = "wifi"; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&can20m>; + oscillator-frequency = <20000000>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + tx-fifo-depth = ; + rx-fifo-depth = ; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <700000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vin_4p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_0p9"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_soc"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p8"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p0"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + compatible = "st,lis2de12"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +/* off-board header */ +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +/* RS232/RS485/RS422 selectable */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; + rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* RS232 console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* bluetooth HCI */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + }; +}; + +/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + rts-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */ + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */ + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000041 /* AMP GPIO2 */ + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x40000041 /* AMP GPIO3 */ + MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x40000041 /* AMP_GPIO4 */ + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */ + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */ + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */ + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */ + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */ + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */ + MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141 + MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */ + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */ + >; + }; + + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + >; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 + MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */ + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 /* RTS */ + MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x140 /* CTS */ + >; + }; + + pinctrl_uart1_gpio: uart1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */ + MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3_gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */ + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */ + MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x140 /* CTS */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x140 /* RTS */ + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x140 /* DTR */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x140 /* DSR */ + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x140 /* DCD */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x140 /* RI */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x140 /* GNSS_PPS */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts new file mode 100644 index 000000000000..e77db4996e58 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -0,0 +1,884 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Gateworks Corporation + */ + +/dts-v1/; + +#include +#include +#include +#include + +#include "imx8mn.dtsi" + +/ { + model = "Gateworks Venice GW7902 i.MX8MN board"; + compatible = "gw,imx8mn-gw7902", "fsl,imx8mn"; + + aliases { + usb0 = &usbotg1; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + can20m: can20m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "can20m"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel1"; + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel2"; + gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel3"; + gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel4"; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = ; + label = "panel5"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb1_vbus: regulator-usb1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-name = "usb_usb1_vbus"; + gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + regulator-name = "wifi"; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&can20m>; + oscillator-frequency = <20000000>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + tx-fifo-depth = ; + rx-fifo-depth = ; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <700000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vin_4p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_0p9"; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_soc"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p8"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_dram"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p0"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + compatible = "st,lis2de12"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +/* off-board header */ +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +/* RS232/RS485/RS422 selectable */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; + status = "okay"; +}; + +/* RS232 console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* bluetooth HCI */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + }; +}; + +/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + disable-over-current; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ + MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* M2_RST# */ + MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ + MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ + MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */ + MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */ + MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */ + MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */ + MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */ + MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */ + MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */ + MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */ + MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x141 + MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x141 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 + MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 + MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 + MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 + MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */ + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */ + >; + }; + + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + >; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 + MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */ + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart1_gpio: uart1gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */ + MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */ + MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3_gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */ + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */ + MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; From bcadd5f66c2afa1b5e71b7a1e1b4594f7aed0ea4 Mon Sep 17 00:00:00 2001 From: Martin Kepplinger Date: Mon, 26 Jul 2021 10:21:17 +0200 Subject: [PATCH 14/27] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2 receiver (new driver) and the CSI Bridge that provides the user buffers (existing driver). An image sensor is to be connected to the MIPIs' second port, to be described in board files. Signed-off-by: Martin Kepplinger Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++++++++++++++++++++++ 1 file changed, 104 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 91df9c5350ae..e026a39bddce 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1099,6 +1099,110 @@ uart4: serial@30a60000 { status = "disabled"; }; + mipi_csi1: csi@30a70000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30a70000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_ESC>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, + <&clk IMX8MQ_CLK_CSI1_ESC>; + assigned-clock-rates = <266000000>, <333000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi1>; + resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>; + interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi1_mipi_ep: endpoint { + remote-endpoint = <&csi1_ep>; + }; + }; + }; + }; + + csi1: csi@30a90000 { + compatible = "fsl,imx8mq-csi", "fsl,imx7-csi"; + reg = <0x30a90000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi1_ep: endpoint { + remote-endpoint = <&csi1_mipi_ep>; + }; + }; + }; + + mipi_csi2: csi@30b60000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30b60000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, + <&clk IMX8MQ_CLK_CSI2_ESC>, + <&clk IMX8MQ_CLK_CSI2_PHY_REF>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, + <&clk IMX8MQ_CLK_CSI2_PHY_REF>, + <&clk IMX8MQ_CLK_CSI2_ESC>; + assigned-clock-rates = <266000000>, <333000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi2>; + resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>, + <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>; + interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2_mipi_ep: endpoint { + remote-endpoint = <&csi2_ep>; + }; + }; + }; + }; + + csi2: csi@30b80000 { + compatible = "fsl,imx8mq-csi", "fsl,imx7-csi"; + reg = <0x30b80000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi2_ep: endpoint { + remote-endpoint = <&csi2_mipi_ep>; + }; + }; + }; + mu: mailbox@30aa0000 { compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu"; reg = <0x30aa0000 0x10000>; From 092cd75e527044050ea76bf774e7d730709b7e8b Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 27 Jul 2021 09:10:57 -0700 Subject: [PATCH 15/27] arm64: dts: imx8mm-venice-gw700x: fix mp5416 pmic config Fix various MP5416 PMIC configurations: - Update regulator names per dt-bindings - ensure values fit among valid register values - add required regulator-max-microamp property - add regulator-always-on prop Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- .../dts/freescale/imx8mm-venice-gw700x.dtsi | 56 ++++++++++++------- 1 file changed, 37 insertions(+), 19 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index c769fadbd008..11dda79cc46b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -283,65 +283,83 @@ pmic@69 { reg = <0x69>; regulators { + /* vdd_0p95: DRAM/GPU/VPU */ buck1 { - regulator-name = "vdd_0p95"; - regulator-min-microvolt = <805000>; + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-max-microamp = <2500000>; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_soc */ buck2 { - regulator-name = "vdd_soc"; - regulator-min-microvolt = <805000>; + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; - regulator-max-microamp = <1000000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_arm */ buck3_reg: buck3 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <805000>; + regulator-name = "buck3"; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; - regulator-max-microamp = <2200000>; - regulator-boot-on; + regulator-min-microamp = <3800000>; + regulator-max-microamp = <6800000>; + regulator-always-on; }; + /* vdd_1p8 */ buck4 { - regulator-name = "vdd_1p8"; + regulator-name = "buck4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-max-microamp = <500000>; + regulator-min-microamp = <2200000>; + regulator-max-microamp = <5200000>; regulator-boot-on; + regulator-always-on; }; + /* nvcc_snvs_1p8 */ ldo1 { - regulator-name = "nvcc_snvs_1p8"; + regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-max-microamp = <300000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_snvs_0p8 */ ldo2 { - regulator-name = "vdd_snvs_0p8"; + regulator-name = "ldo2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_0p9 */ ldo3 { - regulator-name = "vdd_0p95"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; + regulator-name = "ldo3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; regulator-boot-on; + regulator-always-on; }; + /* vdd_1p8 */ ldo4 { - regulator-name = "vdd_1p8"; + regulator-name = "ldo4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; + regulator-always-on; }; }; }; From 500659f3b401fe6ffd1d63f2449d16d8a4204db7 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 27 Jul 2021 09:10:58 -0700 Subject: [PATCH 16/27] arm64: dts: imx8mm-venice-gw700x: fix invalid pmic pin config The GW700x PMIC does not have an interrupt. Remove the invalid pin config. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index 11dda79cc46b..00f86cada30d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -278,8 +278,6 @@ rtc@68 { pmic@69 { compatible = "mps,mp5416"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; reg = <0x69>; regulators { @@ -444,12 +442,6 @@ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 >; }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; - pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 From bd306fdb4e60bcb1d7ea5431a74092803d3784a6 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 27 Jul 2021 09:10:59 -0700 Subject: [PATCH 17/27] arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS The GW71xx has a USB Type-C connector with USB 2.0 signaling. GPIO1_12 is the power-enable to the TPS25821 Source controller and power switch responsible for monitoring the CC pins and enabling VBUS. Therefore GPIO1_12 must always be enabled and the vbus output enable from the IMX8MM can be ignored. To fix USB OTG VBUS enable a pull-up on GPIO1_12 to always power the TPS25821 and change the regulator output to GPIO1_10 which is unconnected. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 905b68a3daa5..8e4a0ce99790 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -46,7 +46,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1 { pinctrl-0 = <&pinctrl_reg_usb1_en>; compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -156,7 +156,8 @@ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 pinctrl_reg_usb1_en: regusb1grp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41 + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141 MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 >; }; From 590dc51bcaf2cb8bb5a6f3c68269fd660e6fad84 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 27 Jul 2021 09:11:00 -0700 Subject: [PATCH 18/27] arm64: dts: imx8mm-venice-gw7901: add support for USB hub subload The USB hub has it's reset as GPIO4_IO17 but can be sub-loaded and VBUS provided by a VBUS regulator with GPIO4_IO2 as the enable and GPIO1_IO15 as the active-low over-current. Enable pull-up for GPIO4_IO17 to keep hub out of reset and move VBUS enable to GPIO4_IO2. Additionally enable pull-up on GPIO1_IO15 so that if the hub is loaded it never over-currents. This allows USB to work in both configurations without a device-tree change. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index f0fe1e19ae43..efab0a7f9a3e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -216,7 +216,7 @@ reg_usb2_vbus: regulator-usb2 { pinctrl-0 = <&pinctrl_reg_usb2>; compatible = "regulator-fixed"; regulator-name = "usb_usb2_vbus"; - gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -822,8 +822,9 @@ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000041 pinctrl_reg_usb2: regusb1grp { fsl,pins = < - MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41 - MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41 + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x41 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140 + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x140 >; }; From a9c577822e98c68f50031b3202c23be66b1ee6a4 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Tue, 27 Jul 2021 09:11:01 -0700 Subject: [PATCH 19/27] arm64: dts: imx8mm-venice-gw7901: enable pull-down on gpio outputs Enable internal pull-down on UART transceiver GPIO config pins. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index efab0a7f9a3e..bafd5c8ea4e2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -875,9 +875,9 @@ MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 pinctrl_uart3_gpio: uart3gpiogrp { fsl,pins = < - MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */ - MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */ - MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */ + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000110 /* RS232# */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000110 /* RS422# */ + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000110 /* RS485# */ >; }; From c1a6018d1839c9cb8f807dc863a50102a1a5c412 Mon Sep 17 00:00:00 2001 From: Raag Jadav Date: Thu, 5 Aug 2021 00:54:45 +0530 Subject: [PATCH 20/27] arm64: dts: ls1046a: fix eeprom entries ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2] eeproms respectively. Both are 4Kb (512 bytes) in size, and compatible with AT24C04[3]. Remove multi-address entries, as both the boards have a single chip each. [1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf [2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf [3] https://ww1.microchip.com/downloads/en/DeviceDoc/doc0180.pdf Signed-off-by: Raag Jadav Acked-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 8 +------- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 7 +------ 2 files changed, 2 insertions(+), 13 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts index db3d303093f6..6d22efbd645c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -83,15 +83,9 @@ rtc@51 { }; eeprom@52 { - compatible = "atmel,24c512"; + compatible = "onnn,cat24c04", "atmel,24c04"; reg = <0x52>; }; - - eeprom@53 { - compatible = "atmel,24c512"; - reg = <0x53>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 60acdf0b689e..7025aad8ae89 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -59,14 +59,9 @@ temp-sensor@4c { }; eeprom@52 { - compatible = "atmel,24c512"; + compatible = "onnn,cat24c05", "atmel,24c04"; reg = <0x52>; }; - - eeprom@53 { - compatible = "atmel,24c512"; - reg = <0x53>; - }; }; &i2c3 { From ceec36ee0d156e87f5a49d9f33dd599df6e2e233 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Sat, 7 Aug 2021 17:45:35 +0800 Subject: [PATCH 21/27] arm64: dts: imx8mm: update pmu compatible i.MX8MM features four Cortex-A53 cores, update the compatible to use more accurate "arm,cortex-a53-pmu" Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index ddaab25b6bdb..485175cca8de 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -192,7 +192,7 @@ psci { }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = ; interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; From 16ce4ce32dc872a12941dcdcc5330797085f4091 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Sat, 7 Aug 2021 17:45:36 +0800 Subject: [PATCH 22/27] arm64: dts: imx8qxp: update pmu compatible i.MX8QXP features four Cortex-A35 cores, use more accurate compatible. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index a625fb6bdc62..617618edf77e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -141,7 +141,7 @@ dsp_reserved: dsp@92400000 { }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a35-pmu"; interrupts = ; }; From d4efa65f30ac84c239ca52f1199301af6b54f68f Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Sat, 7 Aug 2021 17:45:37 +0800 Subject: [PATCH 23/27] arm64: dts: imx8m: drop interrupt-affinity for pmu i.MX8M use PPI for pmu, interrupt-affinity is not needed. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8mp.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 - 4 files changed, 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 485175cca8de..e956dcf4b208 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -195,7 +195,6 @@ pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; - interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; timer { diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 43763d9abc84..2d154a3bf0ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -190,7 +190,6 @@ pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; - interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; psci { diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 2a1a4ff36c67..3096acf63437 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -150,7 +150,6 @@ pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; - interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; psci { diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index e026a39bddce..4066b1612655 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -193,7 +193,6 @@ pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; interrupt-parent = <&gic>; - interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; psci { From 6a47c304316d281677d94fbe92ce544a2e0472d3 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 12 Aug 2021 21:47:12 +0200 Subject: [PATCH 24/27] arm64: dts: imx8mq-reform2: add sound support This adds sound support to the Reform2. It differs from the downstream implementation in that the codec is used as the BCLK and FSYNC master and the i.MX8MQ only supplies a fixed 25MHz MCLK from the oscillator. This allows to support a wider range of audio rates by using the codec PLL and to shut down the audio PLLs on the i.MX8MQ SoC side. Signed-off-by: Lucas Stach Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- .../boot/dts/freescale/imx8mq-mnt-reform2.dts | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 099b0472db5d..2535268f0984 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -40,6 +40,24 @@ reg_main_usb: regulator-main-usb { regulator-max-microvolt = <5000000>; vin-supply = <®_main_5v>; }; + + sound { + compatible = "fsl,imx-audio-wm8960"; + audio-cpu = <&sai2>; + audio-codec = <&wm8960>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "Mic Jack", "MICB", + "LINPUT2", "Line In Jack", + "RINPUT2", "Line In Jack"; + model = "wm8960-audio"; + }; }; &fec1 { @@ -51,6 +69,14 @@ &i2c3 { pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + wm8960: codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; + rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; @@ -89,6 +115,17 @@ ®_soc_gpu_vpu { vin-supply = <®_main_5v>; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + assigned-clock-rates = <25000000>; + fsl,sai-mclk-direction-output; + fsl,sai-asynchronous; + status = "okay"; +}; + &snvs_rtc { status = "disabled"; }; @@ -144,6 +181,18 @@ MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x16 >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45 From e3f9eb037c41fc8139b1dbae4f40064afa76005e Mon Sep 17 00:00:00 2001 From: Mathew McBride Date: Tue, 10 Aug 2021 05:38:24 +0000 Subject: [PATCH 25/27] arm64: dts: ls1088a: add internal PCS for DPMAC1 node A previous patch added the PCS for DPMAC2 only, as used for the AQR PHY on the LS1088ARDB. DPMAC1 PCS access is required for PHYLINK SFP support on the Traverse Ten64 board. Signed-off-by: Mathew McBride Reviewed-by: Ioana Ciornei Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 2fa6cfbef01f..79ceadc9dc4a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -765,6 +765,19 @@ emdio2: mdio@8b97000 { status = "disabled"; }; + pcs_mdio1: mdio@8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs1: ethernet-phy@0 { + reg = <0>; + }; + }; + pcs_mdio2: mdio@8c0b000 { compatible = "fsl,fman-memac-mdio"; reg = <0x0 0x8c0b000 0x0 0x1000>; From 2cfad132b5013c935262a2050f82981ec55de3f8 Mon Sep 17 00:00:00 2001 From: Mathew McBride Date: Tue, 10 Aug 2021 05:38:25 +0000 Subject: [PATCH 26/27] arm64: dts: ls1088a: add missing PMU node The Performance Manager Unit was not described in the DTS which meant performance event monitoring was not possible. This was exposed by a change to the PMU handling in KVM in 5.11-rc3 which now prevents a PMU being exposed to a guest when the host does not provide one: "KVM: arm64: Don't access PMCR_EL0 when no PMU is available" Signed-off-by: Mathew McBride Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 79ceadc9dc4a..f85e437f80b7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -189,6 +189,11 @@ timer { <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; From 418962eea35869b8e07766d8728ae660d75800a9 Mon Sep 17 00:00:00 2001 From: Mathew McBride Date: Tue, 10 Aug 2021 05:38:28 +0000 Subject: [PATCH 27/27] arm64: dts: add device tree for Traverse Ten64 (LS1088A) The Traverse Technologies Ten64 is a Mini-ITX form factor networking board using the NXP LS1088A SoC. This device tree only describes features which the mainline kernel currently has support for, such as some I2C-connected devices that are not described at present. System documentation may be found at ten64doc.traverse.com.au Signed-off-by: Mathew McBride Reviewed-by: Ioana Ciornei # for the MAC/PHY Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1088a-ten64.dts | 389 ++++++++++++++++++ 2 files changed, 390 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 9020350ac3e7..db9e36ebe932 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts new file mode 100644 index 000000000000..3063851c2fb9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Travese Ten64 (LS1088) board + * Based on fsl-ls1088a-rdb.dts + * Copyright 2017-2020 NXP + * Copyright 2019-2021 Traverse Technologies + * + * Author: Mathew McBride + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +#include +#include + +/ { + model = "Traverse Ten64"; + compatible = "traverse,ten64", "fsl,ls1088a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + buttons { + compatible = "gpio-keys"; + + /* Fired by system controller when + * external power off (e.g ATX Power Button) + * asserted + */ + powerdn { + label = "External Power Down"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>; + linux,code = ; + }; + + /* Rear Panel 'ADMIN' button (GPIO_H) */ + admin { + label = "ADMIN button"; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + sfp1down { + label = "ten64:green:sfp1:down"; + gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; + }; + + sfp2up { + label = "ten64:green:sfp2:up"; + gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; + }; + + admin { + label = "ten64:admin"; + gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>; + }; + }; + + sfp_xg0: dpmac2-sfp { + compatible = "sff,sfp"; + i2c-bus = <&sfplower_i2c>; + tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>; + los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; + + sfp_xg1: dpmac1-sfp { + compatible = "sff,sfp"; + i2c-bus = <&sfpupper_i2c>; + tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>; + los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; +}; + +/* XG1 - Upper SFP */ +&dpmac1 { + sfp = <&sfp_xg1>; + pcs-handle = <&pcs1>; + phy-connection-type = "10gbase-r"; + managed = "in-band-status"; +}; + +/* XG0 - Lower SFP */ +&dpmac2 { + sfp = <&sfp_xg0>; + pcs-handle = <&pcs2>; + phy-connection-type = "10gbase-r"; + managed = "in-band-status"; +}; + +/* DPMAC3..6 is GE4 to GE8 */ +&dpmac3 { + phy-handle = <&mdio1_phy5>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_0>; +}; + +&dpmac4 { + phy-handle = <&mdio1_phy6>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_1>; +}; + +&dpmac5 { + phy-handle = <&mdio1_phy7>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_2>; +}; + +&dpmac6 { + phy-handle = <&mdio1_phy8>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_3>; +}; + +/* DPMAC7..10 is GE0 to GE3 */ +&dpmac7 { + phy-handle = <&mdio1_phy1>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_0>; +}; + +&dpmac8 { + phy-handle = <&mdio1_phy2>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_1>; +}; + +&dpmac9 { + phy-handle = <&mdio1_phy3>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_2>; +}; + +&dpmac10 { + phy-handle = <&mdio1_phy4>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_3>; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&emdio1 { + status = "okay"; + + mdio1_phy5: ethernet-phy@c { + reg = <0xc>; + }; + + mdio1_phy6: ethernet-phy@d { + reg = <0xd>; + }; + + mdio1_phy7: ethernet-phy@e { + reg = <0xe>; + }; + + mdio1_phy8: ethernet-phy@f { + reg = <0xf>; + }; + + mdio1_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + mdio1_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + mdio1_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + mdio1_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + sfpgpio: gpio@76 { + compatible = "ti,tca9539"; + reg = <0x76>; + #gpio-cells = <2>; + gpio-controller; + + admin_led_lower { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-low; + }; + }; + + at97sc: tpm@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; +}; + +&i2c2 { + status = "okay"; + + rx8035: rtc@32 { + compatible = "epson,rx8035"; + reg = <0x32>; + }; +}; + +&i2c3 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9540"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpupper_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + sfplower_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&pcs_mdio1 { + status = "okay"; +}; + +&pcs_mdio2 { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio7 { + status = "okay"; +}; + +&qspi { + status = "okay"; + + en25s64: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0 0x100000>; + }; + + partition@100000 { + label = "bl3"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "mcfirmware"; + reg = <0x300000 0x200000>; + }; + + partition@500000 { + label = "ubootenv"; + reg = <0x500000 0x80000>; + }; + + partition@580000 { + label = "dpl"; + reg = <0x580000 0x40000>; + }; + + partition@5C0000 { + label = "dpc"; + reg = <0x5C0000 0x40000>; + }; + + partition@600000 { + label = "devicetree"; + reg = <0x600000 0x40000>; + }; + }; + }; + + nand: flash@1 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* reserved for future boot direct from NAND flash + * (this would use the same layout as the 8MiB NOR flash) + */ + partition@0 { + label = "nand-boot-reserved"; + reg = <0 0x800000>; + }; + + /* recovery / install environment */ + partition@800000 { + label = "recovery"; + reg = <0x800000 0x2000000>; + }; + + /* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */ + partition@2800000 { + label = "ubia"; + reg = <0x2800000 0x6C00000>; + }; + + /* ubib (second OpenWrt) */ + partition@9400000 { + label = "ubib"; + reg = <0x9400000 0x6C00000>; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +};