From ea23578611dce2eeaf31dcfe12cd7130cf3d1411 Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 28 Feb 2020 23:18:49 +0800 Subject: [PATCH 1/3] spi: Allow SPI controller override device buswidth Currently ACPI firmware description for a SPI device does not have any method to describe the data buswidth on the board. So even through the controller and device may support higher modes than standard SPI, it cannot be assumed that the board does - as such, that device is limited to standard SPI in such a circumstance. As a workaround, allow the controller driver supply buswidth override bits, which are used inform the core code that the controller driver knows the buswidth supported on that board for that device. A host controller driver might know this info from DMI tables, for example. Signed-off-by: John Garry Link: https://lore.kernel.org/r/1582903131-160033-2-git-send-email-john.garry@huawei.com Signed-off-by: Mark Brown --- drivers/spi/spi.c | 4 +++- include/linux/spi/spi.h | 3 +++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 38b4c78df506..292f26807b41 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -510,6 +510,7 @@ struct spi_device *spi_alloc_device(struct spi_controller *ctlr) spi->dev.bus = &spi_bus_type; spi->dev.release = spidev_release; spi->cs_gpio = -ENOENT; + spi->mode = ctlr->buswidth_override_bits; spin_lock_init(&spi->statistics.lock); @@ -2181,9 +2182,10 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr, return AE_NO_MEMORY; } + ACPI_COMPANION_SET(&spi->dev, adev); spi->max_speed_hz = lookup.max_speed_hz; - spi->mode = lookup.mode; + spi->mode |= lookup.mode; spi->irq = lookup.irq; spi->bits_per_word = lookup.bits_per_word; spi->chip_select = lookup.chip_select; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 6d16ba01ff5a..600e3793303e 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -481,6 +481,9 @@ struct spi_controller { /* spi_device.mode flags understood by this controller driver */ u32 mode_bits; + /* spi_device.mode flags override flags for this controller */ + u32 buswidth_override_bits; + /* bitmask of supported bits_per_word for transfers */ u32 bits_per_word_mask; #define SPI_BPW_MASK(bits) BIT((bits) - 1) From 8fe21d6b347247227c349c9b2f7c462fae362af4 Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 28 Feb 2020 23:18:50 +0800 Subject: [PATCH 2/3] spi: HiSilicon v3xx: Properly set CMD_CONFIG for Dual/Quad modes The CMD_CONFIG register memory interface type field is not set configured for Dual and Quad modes, so set appropriately. This was not detected previously as we only ever operated in standard SPI mode. Signed-off-by: John Garry Link: https://lore.kernel.org/r/1582903131-160033-3-git-send-email-john.garry@huawei.com Signed-off-by: Mark Brown --- drivers/spi/spi-hisi-sfc-v3xx.c | 43 +++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c index 4cf8fc80a7b7..45d906110ed1 100644 --- a/drivers/spi/spi-hisi-sfc-v3xx.c +++ b/drivers/spi/spi-hisi-sfc-v3xx.c @@ -17,6 +17,12 @@ #define HISI_SFC_V3XX_VERSION (0x1f8) #define HISI_SFC_V3XX_CMD_CFG (0x300) +#define HISI_SFC_V3XX_CMD_CFG_DUAL_IN_DUAL_OUT (1 << 17) +#define HISI_SFC_V3XX_CMD_CFG_DUAL_IO (2 << 17) +#define HISI_SFC_V3XX_CMD_CFG_FULL_DIO (3 << 17) +#define HISI_SFC_V3XX_CMD_CFG_QUAD_IN_QUAD_OUT (5 << 17) +#define HISI_SFC_V3XX_CMD_CFG_QUAD_IO (6 << 17) +#define HISI_SFC_V3XX_CMD_CFG_FULL_QIO (7 << 17) #define HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF 9 #define HISI_SFC_V3XX_CMD_CFG_RW_MSK BIT(8) #define HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK BIT(7) @@ -161,6 +167,43 @@ static int hisi_sfc_v3xx_generic_exec_op(struct hisi_sfc_v3xx_host *host, if (op->addr.nbytes) config |= HISI_SFC_V3XX_CMD_CFG_ADDR_EN_MSK; + switch (op->data.buswidth) { + case 0 ... 1: + break; + case 2: + if (op->addr.buswidth <= 1) { + config |= HISI_SFC_V3XX_CMD_CFG_DUAL_IN_DUAL_OUT; + } else if (op->addr.buswidth == 2) { + if (op->cmd.buswidth <= 1) { + config |= HISI_SFC_V3XX_CMD_CFG_DUAL_IO; + } else if (op->cmd.buswidth == 2) { + config |= HISI_SFC_V3XX_CMD_CFG_FULL_DIO; + } else { + return -EIO; + } + } else { + return -EIO; + } + break; + case 4: + if (op->addr.buswidth <= 1) { + config |= HISI_SFC_V3XX_CMD_CFG_QUAD_IN_QUAD_OUT; + } else if (op->addr.buswidth == 4) { + if (op->cmd.buswidth <= 1) { + config |= HISI_SFC_V3XX_CMD_CFG_QUAD_IO; + } else if (op->cmd.buswidth == 4) { + config |= HISI_SFC_V3XX_CMD_CFG_FULL_QIO; + } else { + return -EIO; + } + } else { + return -EIO; + } + break; + default: + return -EOPNOTSUPP; + } + if (op->data.dir != SPI_MEM_NO_DATA) { config |= (len - 1) << HISI_SFC_V3XX_CMD_CFG_DATA_CNT_OFF; config |= HISI_SFC_V3XX_CMD_CFG_DATA_EN_MSK; From 34e608b023e96f51b31274435b49c8ae61e2389f Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 28 Feb 2020 23:18:51 +0800 Subject: [PATCH 3/3] spi: HiSilicon v3xx: Use DMI quirk to set controller buswidth override bits The Huawei D06 board (and variants) can support Quad mode of operation. Since we have no current method in ACPI SPI bus device resource description to describe this information, use DMI to detect the board, and set the controller buswidth override bits. Signed-off-by: John Garry Link: https://lore.kernel.org/r/1582903131-160033-4-git-send-email-john.garry@huawei.com Signed-off-by: Mark Brown --- drivers/spi/spi-hisi-sfc-v3xx.c | 56 ++++++++++++++++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c index 45d906110ed1..e3b57252d075 100644 --- a/drivers/spi/spi-hisi-sfc-v3xx.c +++ b/drivers/spi/spi-hisi-sfc-v3xx.c @@ -7,6 +7,7 @@ #include #include +#include #include #include #include @@ -250,6 +251,44 @@ static const struct spi_controller_mem_ops hisi_sfc_v3xx_mem_ops = { .exec_op = hisi_sfc_v3xx_exec_op, }; +static int hisi_sfc_v3xx_buswidth_override_bits; + +/* + * ACPI FW does not allow us to currently set the device buswidth, so quirk it + * depending on the board. + */ +static int __init hisi_sfc_v3xx_dmi_quirk(const struct dmi_system_id *d) +{ + hisi_sfc_v3xx_buswidth_override_bits = SPI_RX_QUAD | SPI_TX_QUAD; + + return 0; +} + +static const struct dmi_system_id hisi_sfc_v3xx_dmi_quirk_table[] = { + { + .callback = hisi_sfc_v3xx_dmi_quirk, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), + DMI_MATCH(DMI_PRODUCT_NAME, "D06"), + }, + }, + { + .callback = hisi_sfc_v3xx_dmi_quirk, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), + DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 2280 V2"), + }, + }, + { + .callback = hisi_sfc_v3xx_dmi_quirk, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Huawei"), + DMI_MATCH(DMI_PRODUCT_NAME, "TaiShan 200 (Model 2280)"), + }, + }, + {} +}; + static int hisi_sfc_v3xx_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -265,6 +304,8 @@ static int hisi_sfc_v3xx_probe(struct platform_device *pdev) ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; + ctlr->buswidth_override_bits = hisi_sfc_v3xx_buswidth_override_bits; + host = spi_controller_get_devdata(ctlr); host->dev = dev; @@ -320,7 +361,20 @@ static struct platform_driver hisi_sfc_v3xx_spi_driver = { .probe = hisi_sfc_v3xx_probe, }; -module_platform_driver(hisi_sfc_v3xx_spi_driver); +static int __init hisi_sfc_v3xx_spi_init(void) +{ + dmi_check_system(hisi_sfc_v3xx_dmi_quirk_table); + + return platform_driver_register(&hisi_sfc_v3xx_spi_driver); +} + +static void __exit hisi_sfc_v3xx_spi_exit(void) +{ + platform_driver_unregister(&hisi_sfc_v3xx_spi_driver); +} + +module_init(hisi_sfc_v3xx_spi_init); +module_exit(hisi_sfc_v3xx_spi_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("John Garry ");