diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 961bed832755..ccf917de5e1a 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -112,10 +112,8 @@ pm: watchdog@7e100000 {
 		};
 
 		rng@7e104000 {
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-
-			/* RNG is incompatible with brcm,bcm2835-rng */
-			status = "disabled";
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
 		};
 
 		uart2: serial@7e201400 {
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index fe1ab40c7f22..2b1d9d4c0cde 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -70,6 +70,12 @@ pm: watchdog@7e100000 {
 			system-power-controller;
 		};
 
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
 		pixelvalve@7e206000 {
 			compatible = "brcm,bcm2835-pixelvalve0";
 			reg = <0x7e206000 0x100>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 3caaa57eb6c8..5219339fc27c 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -84,12 +84,6 @@ clocks: cprman@7e101000 {
 				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
 		};
 
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-			interrupts = <2 29>;
-		};
-
 		mailbox: mailbox@7e00b880 {
 			compatible = "brcm,bcm2835-mbox";
 			reg = <0x7e00b880 0x40>;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index a2c9de35ddfb..536fb24f38bb 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -55,18 +55,9 @@ gpio-restart {
 		priority = <200>;
 	};
 
-	/* Hardware I2C block cannot do more than 63 bytes per transfer,
-	 * which would prevent reading from a SFP's EEPROM (256 byte).
-	 */
-	i2c1: i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	};
-
 	sfp: sfp {
 		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
+		i2c-bus = <&i2c0>;
 		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
 		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
@@ -74,6 +65,10 @@ sfp: sfp {
 	};
 };
 
+&i2c0 {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };