Merge tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from CAN

  Current release - regressions:

    - udp: do not use skb_release_head_state() before
      skb_attempt_defer_free()

    - gro_cells: use nested-BH locking for gro_cell

    - dpll: zl3073x: increase maximum size of flash utility

  Previous releases - regressions:

    - core: fix lockdep splat on device unregister

    - tcp: fix tcp_tso_should_defer() vs large RTT

    - tls:
        - don't rely on tx_work during send()
        - wait for pending async decryptions if tls_strp_msg_hold fails

    - can: j1939: add missing calls in NETDEV_UNREGISTER notification
      handler

    - eth: lan78xx: fix lost EEPROM write timeout in
      lan78xx_write_raw_eeprom

  Previous releases - always broken:

    - ip6_tunnel: prevent perpetual tunnel growth

    - dpll: zl3073x: handle missing or corrupted flash configuration

    - can: m_can: fix pm_runtime and CAN state handling

    - eth:
        - ixgbe: fix too early devlink_free() in ixgbe_remove()
        - ixgbevf: fix mailbox API compatibility
        - gve: Check valid ts bit on RX descriptor before hw timestamping
        - idpf: cleanup remaining SKBs in PTP flows
        - r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"

* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  udp: do not use skb_release_head_state() before skb_attempt_defer_free()
  net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
  netdevsim: set the carrier when the device goes up
  selftests: tls: add test for short splice due to full skmsg
  selftests: net: tls: add tests for cmsg vs MSG_MORE
  tls: don't rely on tx_work during send()
  tls: wait for pending async decryptions if tls_strp_msg_hold fails
  tls: always set record_type in tls_process_cmsg
  tls: wait for async encrypt in case of error during latter iterations of sendmsg
  tls: trim encrypted message to match the plaintext on short splice
  tg3: prevent use of uninitialized remote_adv and local_adv variables
  MAINTAINERS: new entry for IPv6 IOAM
  gve: Check valid ts bit on RX descriptor before hw timestamping
  net: core: fix lockdep splat on device unregister
  MAINTAINERS: add myself as maintainer for b53
  selftests: net: check jq command is supported
  net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
  tcp: fix tcp_tso_should_defer() vs large RTT
  r8152: add error handling in rtl8152_driver_init
  usbnet: Fix using smp_processor_id() in preemptible code warnings
  ...

tools/testing/selftests/drivers/net/hw/lib/py/__init__.py

@@ -1,5 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0
 
+"""
+Driver test environment (hardware-only tests).
+NetDrvEnv and NetDrvEpEnv are the main environment classes.
+Former is for local host only tests, latter creates / connects
+to a remote endpoint. See NIPA wiki for more information about
+running and writing driver tests.
+"""
+
 import sys
 from pathlib import Path
 
@@ -8,26 +16,36 @@ KSFT_DIR = (Path(__file__).parent / "../../../../..").resolve()
 try:
     sys.path.append(KSFT_DIR.as_posix())
 
-    from net.lib.py import *
-    from drivers.net.lib.py import *
-
     # Import one by one to avoid pylint false positives
+    from net.lib.py import NetNS, NetNSEnter, NetdevSimDev
     from net.lib.py import EthtoolFamily, NetdevFamily, NetshaperFamily, \
         NlError, RtnlFamily, DevlinkFamily, PSPFamily
     from net.lib.py import CmdExitFailure
-    from net.lib.py import bkg, cmd, defer, ethtool, fd_read_timeout, ip, \
-        rand_port, tool, wait_port_listen
-    from net.lib.py import fd_read_timeout
+    from net.lib.py import bkg, cmd, bpftool, bpftrace, defer, ethtool, \
+        fd_read_timeout, ip, rand_port, wait_port_listen, wait_file
     from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx
     from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \
         ksft_setup
     from net.lib.py import ksft_eq, ksft_ge, ksft_in, ksft_is, ksft_lt, \
         ksft_ne, ksft_not_in, ksft_raises, ksft_true, ksft_gt, ksft_not_none
-    from net.lib.py import NetNSEnter
-    from drivers.net.lib.py import GenerateTraffic
+    from drivers.net.lib.py import GenerateTraffic, Remote
     from drivers.net.lib.py import NetDrvEnv, NetDrvEpEnv
+
+    __all__ = ["NetNS", "NetNSEnter", "NetdevSimDev",
+               "EthtoolFamily", "NetdevFamily", "NetshaperFamily",
+               "NlError", "RtnlFamily", "DevlinkFamily", "PSPFamily",
+               "CmdExitFailure",
+               "bkg", "cmd", "bpftool", "bpftrace", "defer", "ethtool",
+               "fd_read_timeout", "ip", "rand_port",
+               "wait_port_listen", "wait_file",
+               "KsftSkipEx", "KsftFailEx", "KsftXfailEx",
+               "ksft_disruptive", "ksft_exit", "ksft_pr", "ksft_run",
+               "ksft_setup",
+               "ksft_eq", "ksft_ge", "ksft_in", "ksft_is", "ksft_lt",
+               "ksft_ne", "ksft_not_in", "ksft_raises", "ksft_true", "ksft_gt",
+               "ksft_not_none", "ksft_not_none",
+               "NetDrvEnv", "NetDrvEpEnv", "GenerateTraffic", "Remote"]
 except ModuleNotFoundError as e:
-    ksft_pr("Failed importing `net` library from kernel sources")
-    ksft_pr(str(e))
-    ktap_result(True, comment="SKIP")
+    print("Failed importing `net` library from kernel sources")
+    print(str(e))
     sys.exit(4)

tools/testing/selftests/drivers/net/lib/py/__init__.py

@@ -22,7 +22,7 @@ try:
         NlError, RtnlFamily, DevlinkFamily, PSPFamily
     from net.lib.py import CmdExitFailure
     from net.lib.py import bkg, cmd, bpftool, bpftrace, defer, ethtool, \
-        fd_read_timeout, ip, rand_port, tool, wait_port_listen, wait_file
+        fd_read_timeout, ip, rand_port, wait_port_listen, wait_file
     from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx
     from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \
         ksft_setup
@@ -34,7 +34,7 @@ try:
                "NlError", "RtnlFamily", "DevlinkFamily", "PSPFamily",
                "CmdExitFailure",
                "bkg", "cmd", "bpftool", "bpftrace", "defer", "ethtool",
-               "fd_read_timeout", "ip", "rand_port", "tool",
+               "fd_read_timeout", "ip", "rand_port",
                "wait_port_listen", "wait_file",
                "KsftSkipEx", "KsftFailEx", "KsftXfailEx",
                "ksft_disruptive", "ksft_exit", "ksft_pr", "ksft_run",

tools/testing/selftests/net/lib/py/__init__.py

@@ -1,9 +1,32 @@
 # SPDX-License-Identifier: GPL-2.0
 
+"""
+Python selftest helpers for netdev.
+"""
+
 from .consts import KSRC
-from .ksft import *
+from .ksft import KsftFailEx, KsftSkipEx, KsftXfailEx, ksft_pr, ksft_eq, \
+    ksft_ne, ksft_true, ksft_not_none, ksft_in, ksft_not_in, ksft_is, \
+    ksft_ge, ksft_gt, ksft_lt, ksft_raises, ksft_busy_wait, \
+    ktap_result, ksft_disruptive, ksft_setup, ksft_run, ksft_exit
 from .netns import NetNS, NetNSEnter
-from .nsim import *
-from .utils import *
+from .nsim import NetdevSim, NetdevSimDev
+from .utils import CmdExitFailure, fd_read_timeout, cmd, bkg, defer, \
+    bpftool, ip, ethtool, bpftrace, rand_port, wait_port_listen, wait_file
 from .ynl import NlError, YnlFamily, EthtoolFamily, NetdevFamily, RtnlFamily, RtnlAddrFamily
 from .ynl import NetshaperFamily, DevlinkFamily, PSPFamily
+
+__all__ = ["KSRC",
+           "KsftFailEx", "KsftSkipEx", "KsftXfailEx", "ksft_pr", "ksft_eq",
+           "ksft_ne", "ksft_true", "ksft_not_none", "ksft_in", "ksft_not_in",
+           "ksft_is", "ksft_ge", "ksft_gt", "ksft_lt", "ksft_raises",
+           "ksft_busy_wait", "ktap_result", "ksft_disruptive", "ksft_setup",
+           "ksft_run", "ksft_exit",
+           "NetNS", "NetNSEnter",
+           "CmdExitFailure", "fd_read_timeout", "cmd", "bkg", "defer",
+           "bpftool", "ip", "ethtool", "bpftrace", "rand_port",
+           "wait_port_listen", "wait_file",
+           "NetdevSim", "NetdevSimDev",
+           "NetshaperFamily", "DevlinkFamily", "PSPFamily", "NlError",
+           "YnlFamily", "EthtoolFamily", "NetdevFamily", "RtnlFamily",
+           "RtnlAddrFamily"]

tools/testing/selftests/net/rtnetlink.sh

@@ -1466,6 +1466,8 @@ usage: ${0##*/} OPTS
 EOF
 }
 
+require_command jq
+
 #check for needed privileges
 if [ "$(id -u)" -ne 0 ];then
 	end_test "SKIP: Need root privileges"

tools/testing/selftests/net/tls.c

@@ -564,6 +564,40 @@ TEST_F(tls, msg_more)
 	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
 }
 
+TEST_F(tls, cmsg_msg_more)
+{
+	char *test_str =  "test_read";
+	char record_type = 100;
+	int send_len = 10;
+
+	/* we don't allow MSG_MORE with non-DATA records */
+	EXPECT_EQ(tls_send_cmsg(self->fd, record_type, test_str, send_len,
+				MSG_MORE), -1);
+	EXPECT_EQ(errno, EINVAL);
+}
+
+TEST_F(tls, msg_more_then_cmsg)
+{
+	char *test_str = "test_read";
+	char record_type = 100;
+	int send_len = 10;
+	char buf[10 * 2];
+	int ret;
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, MSG_MORE), send_len);
+	EXPECT_EQ(recv(self->cfd, buf, send_len, MSG_DONTWAIT), -1);
+
+	ret = tls_send_cmsg(self->fd, record_type, test_str, send_len, 0);
+	EXPECT_EQ(ret, send_len);
+
+	/* initial DATA record didn't get merged with the non-DATA record */
+	EXPECT_EQ(recv(self->cfd, buf, send_len * 2, 0), send_len);
+
+	EXPECT_EQ(tls_recv_cmsg(_metadata, self->cfd, record_type,
+				buf, sizeof(buf), MSG_WAITALL),
+		  send_len);
+}
+
 TEST_F(tls, msg_more_unsent)
 {
 	char const *test_str = "test_read";
@@ -912,6 +946,37 @@ TEST_F(tls, peek_and_splice)
 	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
 }
 
+#define MAX_FRAGS 48
+TEST_F(tls, splice_short)
+{
+	struct iovec sendchar_iov;
+	char read_buf[0x10000];
+	char sendbuf[0x100];
+	char sendchar = 'S';
+	int pipefds[2];
+	int i;
+
+	sendchar_iov.iov_base = &sendchar;
+	sendchar_iov.iov_len = 1;
+
+	memset(sendbuf, 's', sizeof(sendbuf));
+
+	ASSERT_GE(pipe2(pipefds, O_NONBLOCK), 0);
+	ASSERT_GE(fcntl(pipefds[0], F_SETPIPE_SZ, (MAX_FRAGS + 1) * 0x1000), 0);
+
+	for (i = 0; i < MAX_FRAGS; i++)
+		ASSERT_GE(vmsplice(pipefds[1], &sendchar_iov, 1, 0), 0);
+
+	ASSERT_EQ(write(pipefds[1], sendbuf, sizeof(sendbuf)), sizeof(sendbuf));
+
+	EXPECT_EQ(splice(pipefds[0], NULL, self->fd, NULL, MAX_FRAGS + 0x1000, 0),
+		  MAX_FRAGS + sizeof(sendbuf));
+	EXPECT_EQ(recv(self->cfd, read_buf, sizeof(read_buf), 0), MAX_FRAGS + sizeof(sendbuf));
+	EXPECT_EQ(recv(self->cfd, read_buf, sizeof(read_buf), MSG_DONTWAIT), -1);
+	EXPECT_EQ(errno, EAGAIN);
+}
+#undef MAX_FRAGS
+
 TEST_F(tls, recvmsg_single)
 {
 	char const *test_str = "test_recvmsg_single";

tools/testing/selftests/net/vlan_bridge_binding.sh

@@ -249,6 +249,8 @@ test_binding_toggle_off_when_upper_down()
 	do_test_binding_off : "on->off when upper down"
 }
 
+require_command jq
+
 trap defer_scopes_cleanup EXIT
 setup_prepare
 tests_run