From 3a0670824979a986a2314c921aa092e60730eeae Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 20 Jun 2021 20:54:21 +0200 Subject: [PATCH 01/10] ARM: dts: stm32: Prefer HW RTC on DHCOM SoM The DHCOM SoM has two RTC, one is the STM32 RTC built into the SoC and another is Microcrystal RV RTC. By default, only the later has battery backup, the former does not. The order in which the RTCs are probed on boot is random, which means the kernel might pick up system time from the STM32 RTC which has no battery backup. This then leads to incorrect initial system time setup, even though the HW RTC has correct time configured in it. Add DT alias entries, so that the RTCs get assigned fixed IDs and the HW RTC is always picked by the kernel as the default RTC, thus resulting in correct system time in early userspace. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 2af0a6752674..8349c9099e30 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -12,6 +12,8 @@ / { aliases { ethernet0 = ðernet0; ethernet1 = &ksz8851; + rtc0 = &hwrtc; + rtc1 = &rtc; }; memory@c0000000 { @@ -248,7 +250,7 @@ &i2c4 { /delete-property/dmas; /delete-property/dma-names; - rtc@32 { + hwrtc: rtc@32 { compatible = "microcrystal,rv8803"; reg = <0x32>; }; From 36862c1ebc92a7e6fcc55002965c44b8ad17d4ca Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 21 Jul 2021 20:12:53 +0200 Subject: [PATCH 02/10] ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM The LAN8710 Energy Detect Power Down (EDPD) functionality might cause unreliable cable detection. There are multiple accounts of this in the SMSC PHY driver patches which attempted to make EDPD reliable, however it seems there is always some sort of corner case left. Unfortunatelly, there is no errata documented which would confirm this to be a silicon bug on the LAN87xx series of PHYs (LAN8700, LAN8710, LAN8720 at least). Disable EDPD on the DHCOM SoM, just like multiple other boards already do as well, to make the cable detection reliable. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 8349c9099e30..8c41f819f776 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -140,6 +140,7 @@ phy0: ethernet-phy@1 { reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; reset-assert-us = <500>; reset-deassert-us = <500>; + smsc,disable-energy-detect; interrupt-parent = <&gpioi>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; From 15f68f027ebd961b99a1c420f96ff3838c5e4450 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 21 Jul 2021 20:10:40 +0200 Subject: [PATCH 03/10] ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM While 7e5f3155dcbb4 ("ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2") fixed the LED0 assignment on the PDK2 board, the same commit did not update the touchscreen IRQ line assignment, which is the same GPIO line, shared between the LED0 output and touchscreen IRQ input. To make this more convoluted, the same EXTI input (not the same GPIO line) is shared between Button B which is Active-Low IRQ, and touchscreen IRQ which is Edge-Falling IRQ, which cannot be used at the same time. In case the LCD board with touchscreen is in use, which is the case here, LED0 must be disabled, Button B must be polled, so the touchscreen interrupt works as it should. Update the touchscreen IRQ line assignment, disable LED0 and use polled GPIO button driver for Button B, since the DT here describes baseboard with LCD board. Fixes: 7e5f3155dcbb4 ("ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 24 +++++++++++-------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index c5ea08fec535..6cf1c8b4c6e2 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -37,7 +37,7 @@ gpio-keys-polled { poll-interval = <20>; /* - * The EXTi IRQ line 3 is shared with touchscreen and ethernet, + * The EXTi IRQ line 3 is shared with ethernet, * so mark this as polled GPIO key. */ button-0 { @@ -46,6 +46,16 @@ button-0 { gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; }; + /* + * The EXTi IRQ line 6 is shared with touchscreen, + * so mark this as polled GPIO key. + */ + button-1 { + label = "TA2-GPIO-B"; + linux,code = ; + gpios = <&gpiod 6 GPIO_ACTIVE_LOW>; + }; + /* * The EXTi IRQ line 0 is shared with PMIC, * so mark this as polled GPIO key. @@ -60,13 +70,6 @@ button-2 { gpio-keys { compatible = "gpio-keys"; - button-1 { - label = "TA2-GPIO-B"; - linux,code = ; - gpios = <&gpiod 6 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - button-3 { label = "TA4-GPIO-D"; linux,code = ; @@ -82,6 +85,7 @@ led-0 { label = "green:led5"; gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>; default-state = "off"; + status = "disabled"; }; led-1 { @@ -185,8 +189,8 @@ sgtl5000_rx_endpoint: endpoint@1 { touchscreen@38 { compatible = "edt,edt-ft5406"; reg = <0x38>; - interrupt-parent = <&gpiog>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + interrupt-parent = <&gpioc>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ }; }; From a79e78c391dc074742c855dc0108a88f781d56a3 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 Jun 2021 17:02:41 +0200 Subject: [PATCH 04/10] ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoM Fix the following dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:frame-master: True is not of type 'array' arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: codec@a: port:endpoint@0:bitclock-master: True is not of type 'array' Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 6cf1c8b4c6e2..c9577ba2973d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -172,15 +172,15 @@ sgtl5000_port: port { sgtl5000_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; + frame-master = <&sgtl5000_tx_endpoint>; + bitclock-master = <&sgtl5000_tx_endpoint>; }; sgtl5000_rx_endpoint: endpoint@1 { reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; + frame-master = <&sgtl5000_rx_endpoint>; + bitclock-master = <&sgtl5000_rx_endpoint>; }; }; From 10ba166b1140b9c784594e1c50dc08ba75e30676 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 Jun 2021 17:02:42 +0200 Subject: [PATCH 05/10] ARM: dts: stm32: Add backlight and panel supply on DHCOM SoM Fix the following dtbs_check warning: arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: display-bl: 'power-supply' is a required property arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dt.yaml: panel: 'power-supply' is a required property Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index c9577ba2973d..fbf3826933e4 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -29,6 +29,7 @@ display_bl: display-bl { brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; + power-supply = <®_panel_bl>; status = "okay"; }; @@ -110,6 +111,7 @@ led-3 { panel { compatible = "edt,etm0700g0edh6"; backlight = <&display_bl>; + power-supply = <®_panel_bl>; port { lcd_panel_in: endpoint { @@ -118,6 +120,21 @@ lcd_panel_in: endpoint { }; }; + reg_panel_bl: regulator-panel-bl { + compatible = "regulator-fixed"; + regulator-name = "panel_backlight"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_panel_supply>; + }; + + reg_panel_supply: regulator-panel-supply { + compatible = "regulator-fixed"; + regulator-name = "panel_supply"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + }; + sound { compatible = "audio-graph-card"; routing = From e24e70aa76b3753ba4e34b94af1f9779a4e5c5c3 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 Jun 2021 17:02:43 +0200 Subject: [PATCH 06/10] ARM: dts: stm32: Add usbphyc_port1 supply on DHCOM SoM The port is unused, but shares the same supply with port0, so fill the DT property in. This fixes the following dtbs_check warning: arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: usbphyc@5a006000: usb-phy@1: 'phy-supply' is a required property Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: kernel@dh-electronics.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index fb45c5aa878d..4b10b013ffd5 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -159,3 +159,7 @@ &usbphyc { &usbphyc_port0 { phy-supply = <&vdd_usb>; }; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; From 9542ca9e9a99ac9fa6103816bf356a3216df8f1b Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 14 Jun 2021 18:49:39 +0200 Subject: [PATCH 07/10] ARM: dts: stm32: Add coprocessor detach mbox on stm32mp157c-ed1 board To support the detach feature, add a new mailbox channel to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Signed-off-by: Arnaud Pouliquen Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ed1.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 95b08876b2b3..46b471d09c50 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -313,8 +313,8 @@ &iwdg2 { &m4_rproc { memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; From 6257dfc1c412dcdbd76ca5fa92c8444222dbe5b0 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 14 Jun 2021 18:49:40 +0200 Subject: [PATCH 08/10] ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards To support the detach feature, add a new mailbox channel to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Signed-off-by: Arnaud Pouliquen Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 59f18846cf5d..06c11bad882a 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -470,8 +470,8 @@ ltdc_ep0_out: endpoint@0 { &m4_rproc { memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; From 8aec45d7884f16cc21d668693c5b88bff8df0f02 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 10 Jun 2021 17:03:06 +0200 Subject: [PATCH 09/10] ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKx Fix the following dtbs_check warning: cs42l51@4a: port:endpoint@0:frame-master: True is not of type 'array' cs42l51@4a: port:endpoint@0:bitclock-master: True is not of type 'array' Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 06c11bad882a..899bfe04aeb9 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -220,15 +220,15 @@ cs42l51_port: port { cs42l51_tx_endpoint: endpoint@0 { reg = <0>; remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_tx_endpoint>; + bitclock-master = <&cs42l51_tx_endpoint>; }; cs42l51_rx_endpoint: endpoint@1 { reg = <1>; remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; + frame-master = <&cs42l51_rx_endpoint>; + bitclock-master = <&cs42l51_rx_endpoint>; }; }; }; From 1e6bc5987a5252948e3411e5a2dbb434fd1ea107 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 20 Jun 2021 23:24:31 +0200 Subject: [PATCH 10/10] ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check Swap reg and reg-names order and drop adi,input-justification and adi,input-style to fix the following dtbs_check warnings: arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-justification: False schema does not allow ['evenly'] arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: adi,input-style: False schema does not allow [[1]] arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:1: 'edid' was expected arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dt.yaml: hdmi-transmitter@3d: reg-names:2: 'cec' was expected Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 64dca5b7f748..6885948f3024 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -220,8 +220,8 @@ &i2c2 { /* X6 I2C2 */ &i2c4 { hdmi-transmitter@3d { compatible = "adi,adv7513"; - reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; + reg-names = "main", "edid", "cec", "packet"; clocks = <&cec_clock>; clock-names = "cec"; @@ -239,8 +239,6 @@ hdmi-transmitter@3d { adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; ports { #address-cells = <1>;