diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 0c1057456597..c2317dd29896 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -326,8 +326,8 @@ tcsr_mutex: hwlock@340000 {
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,sm6125-tlmm";
 			reg = <0x00500000 0x400000>,
-				<0x00900000 0x400000>,
-				<0x00d00000 0x400000>;
+			      <0x00900000 0x400000>,
+			      <0x00d00000 0x400000>;
 			reg-names = "west", "south", "east";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
@@ -391,12 +391,12 @@ sdhc_1: sdhci@4744000 {
 			reg-names = "hc", "core";
 
 			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-				<&gcc GCC_SDCC1_APPS_CLK>,
-				<&xo_board>;
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
 			bus-width = <8>;
 			non-removable;
@@ -409,12 +409,12 @@ sdhc_2: sdhci@4784000 {
 			reg-names = "hc";
 
 			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				<&gcc GCC_SDCC2_APPS_CLK>,
-				<&xo_board>;
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
 
 			pinctrl-0 = <&sdc2_state_on>;
@@ -433,11 +433,11 @@ usb3: usb@4ef8800 {
 			ranges;
 
 			clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
-				<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
-				<&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
-				<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
-				<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
 
 			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
@@ -462,11 +462,11 @@ usb3_dwc3: usb@4e00000 {
 
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg =	<0x01c40000 0x1100>,
-				<0x01e00000 0x2000000>,
-				<0x03e00000 0x100000>,
-				<0x03f00000 0xa0000>,
-				<0x01c0a000 0x26000>;
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
@@ -497,7 +497,7 @@ timer@f120000 {
 			frame@f121000 {
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-						<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0f121000 0x1000>,
 				      <0x0f122000 0x1000>;
 			};
@@ -548,7 +548,7 @@ frame@f128000 {
 		intc: interrupt-controller@f200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0f200000 0x20000>,
-				<0x0f300000 0x100000>;
+			      <0x0f300000 0x100000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -558,9 +558,9 @@ intc: interrupt-controller@f200000 {
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 1 0xf08
-				GIC_PPI 2 0xf08
-				GIC_PPI 3 0xf08
-				GIC_PPI 0 0xf08>;
+			      GIC_PPI 2 0xf08
+			      GIC_PPI 3 0xf08
+			      GIC_PPI 0 0xf08>;
 		clock-frequency = <19200000>;
 	};
 };