From 3f25bb4b7f7718d391321608f947840a79934568 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 21 Jun 2017 10:35:09 +0300 Subject: [PATCH 1/8] iwlwifi: mvm: fix TCP CSUM offload with WEP and A000 series When we enabled TCP checksum offload, we need to tell the firmware where the IP header starts. If we have an IV, then we need to adapt that value since the IV is placed before the SNAP header. This is true only for cases where the driver adds the IV, not the WEP case in which the IV is added by the firmware itself. On A000 devices series, the IV is always added by the device. Fix this. Fixes: 5e6a98dc4863 ("iwlwifi: mvm: enable TCP/UDP checksum support for 9000 family") Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index 60360ed73f26..e5d3eba2e82a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -185,8 +185,14 @@ static u16 iwl_mvm_tx_csum(struct iwl_mvm *mvm, struct sk_buff *skb, else udp_hdr(skb)->check = 0; - /* mac header len should include IV, size is in words */ - if (info->control.hw_key) + /* + * mac header len should include IV, size is in words unless + * the IV is added by the firmware like in WEP. + * In new Tx API, the IV is always added by the firmware. + */ + if (!iwl_mvm_has_new_tx_api(mvm) && info->control.hw_key && + info->control.hw_key->cipher != WLAN_CIPHER_SUITE_WEP40 && + info->control.hw_key->cipher != WLAN_CIPHER_SUITE_WEP104) mh_len += info->control.hw_key->iv_len; mh_len /= 2; offload_assist |= mh_len << TX_CMD_OFFLD_MH_SIZE; From 58877d7428b0747134cb65096d51dfabdc62000d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 29 Jun 2017 16:18:21 +0300 Subject: [PATCH 2/8] iwlwifi: add TLV for MLME offload firmware capability The firmware now adds a new DWORD for the MLME offload's capability even on firmware versions that don't support it. Add the TLV bit to avoid getting the print: capa flags index 3 larger than supported by driver. This fixes the bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196195 Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/fw/file.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/file.h b/drivers/net/wireless/intel/iwlwifi/fw/file.h index 0fa8c473f1e2..c73a6438ce8f 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h @@ -328,6 +328,7 @@ typedef unsigned int __bitwise iwl_ucode_tlv_capa_t; * @IWL_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger * command size (command version 4) that supports toggling ACK TX * power reduction. + * @IWL_UCODE_TLV_CAPA_MLME_OFFLOAD: supports MLME offload * * @NUM_IWL_UCODE_TLV_CAPA: number of bits used */ @@ -373,6 +374,7 @@ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG = (__force iwl_ucode_tlv_capa_t)80, IWL_UCODE_TLV_CAPA_LQM_SUPPORT = (__force iwl_ucode_tlv_capa_t)81, IWL_UCODE_TLV_CAPA_TX_POWER_ACK = (__force iwl_ucode_tlv_capa_t)84, + IWL_UCODE_TLV_CAPA_MLME_OFFLOAD = (__force iwl_ucode_tlv_capa_t)96, NUM_IWL_UCODE_TLV_CAPA #ifdef __CHECKER__ From 92b0f7b26b313b23cc9bef0bd406607f4566c0c0 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 3 Jul 2017 16:25:33 +0300 Subject: [PATCH 3/8] iwlwifi: split the regulatory rules when the bandwidth flags require it When we create a regulatory domain out of an MCC notification, we need to make sure that all the channels in the rule have the exact same properties. The current code mixes channel 36 and 40 although 36 can be a control channel with HT40+ (36, 40) whereas 40 can't be a control channel with HT40+ since (40, 44) is invalid. Because of that, cfg80211 would allow to connect in 40MHz to APs that are configured to channel 40 HT40+ and that made our firmware assert. Fix this by checking the bandwidth flags before taking the decision if the rule should be split. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195299 partly. Fixes: af45a9003f1f ("iwlwifi: create regdomain from mcc_update_cmd response") Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- .../wireless/intel/iwlwifi/iwl-nvm-parse.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index 5c08f4d40f6a..3ee6767392b6 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -785,7 +785,8 @@ iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg, int num_of_ch, __le32 *channels, u16 fw_mcc) { int ch_idx; - u16 ch_flags, prev_ch_flags = 0; + u16 ch_flags; + u32 reg_rule_flags, prev_reg_rule_flags = 0; const u8 *nvm_chan = cfg->ext_nvm ? iwl_ext_nvm_channels : iwl_nvm_channels; struct ieee80211_regdomain *regd; @@ -834,8 +835,11 @@ iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg, continue; } + reg_rule_flags = iwl_nvm_get_regdom_bw_flags(nvm_chan, ch_idx, + ch_flags, cfg); + /* we can't continue the same rule */ - if (ch_idx == 0 || prev_ch_flags != ch_flags || + if (ch_idx == 0 || prev_reg_rule_flags != reg_rule_flags || center_freq - prev_center_freq > 20) { valid_rules++; new_rule = true; @@ -854,18 +858,17 @@ iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg, rule->power_rule.max_eirp = DBM_TO_MBM(IWL_DEFAULT_MAX_TX_POWER); - rule->flags = iwl_nvm_get_regdom_bw_flags(nvm_chan, ch_idx, - ch_flags, cfg); + rule->flags = reg_rule_flags; /* rely on auto-calculation to merge BW of contiguous chans */ rule->flags |= NL80211_RRF_AUTO_BW; rule->freq_range.max_bandwidth_khz = 0; - prev_ch_flags = ch_flags; prev_center_freq = center_freq; + prev_reg_rule_flags = reg_rule_flags; IWL_DEBUG_DEV(dev, IWL_DL_LAR, - "Ch. %d [%sGHz] %s%s%s%s%s%s%s%s%s(0x%02x): Ad-Hoc %ssupported\n", + "Ch. %d [%sGHz] %s%s%s%s%s%s%s%s%s(0x%02x) reg_flags 0x%x: %s\n", center_freq, band == NL80211_BAND_5GHZ ? "5.2" : "2.4", CHECK_AND_PRINT_I(VALID), @@ -877,10 +880,10 @@ iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg, CHECK_AND_PRINT_I(160MHZ), CHECK_AND_PRINT_I(INDOOR_ONLY), CHECK_AND_PRINT_I(GO_CONCURRENT), - ch_flags, + ch_flags, reg_rule_flags, ((ch_flags & NVM_CHANNEL_ACTIVE) && !(ch_flags & NVM_CHANNEL_RADAR)) - ? "" : "not "); + ? "Ad-Hoc" : ""); } regd->n_reg_rules = valid_rules; From 9465c3f8ba67cff697c0529de5a03cc5e1509d41 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Thu, 6 Jul 2017 05:07:33 +0300 Subject: [PATCH 4/8] iwlwifi: mvm: set A-MPDU bit upon empty BA notification from FW The bit was set only if there was at least one reclaimed frame in an aggregation. It's important to set it also in the case that the whole A-MPDU was lost, otherwise rate scaling statistics will not be updated correctly. Thus, set it always in ba notification handler. This fixes a throughput degradation of about 20% in certain scenarios with multiple streams on 11ac. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index e5d3eba2e82a..5fcc9dd6be56 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -1821,6 +1821,8 @@ void iwl_mvm_rx_ba_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb) struct iwl_mvm_tid_data *tid_data; struct iwl_mvm_sta *mvmsta; + ba_info.flags = IEEE80211_TX_STAT_AMPDU; + if (iwl_mvm_has_new_tx_api(mvm)) { struct iwl_mvm_compressed_ba_notif *ba_res = (void *)pkt->data; From 87f55616f81bf6c82f0e94cf4661151399d2a7b6 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Thu, 6 Jul 2017 05:27:55 +0300 Subject: [PATCH 5/8] iwlwifi: mvm: rs: fix TLC statistics collection Statistics should be collected according to the actual rate a frame/aggregation was transmitted and not according to the initial rate from the last LQ command (these rates are different if the frames were retransmitted at a lower rate from the rate scale table). This is needed to remove throughput degradation. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index 65beca3a457a..8999a1199d60 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -1291,7 +1291,7 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, * first index into rate scale table. */ if (info->flags & IEEE80211_TX_STAT_AMPDU) { - rs_collect_tpc_data(mvm, lq_sta, curr_tbl, lq_rate.index, + rs_collect_tpc_data(mvm, lq_sta, curr_tbl, tx_resp_rate.index, info->status.ampdu_len, info->status.ampdu_ack_len, reduced_txp); @@ -1312,7 +1312,7 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, if (info->status.ampdu_ack_len == 0) info->status.ampdu_len = 1; - rs_collect_tlc_data(mvm, lq_sta, curr_tbl, lq_rate.index, + rs_collect_tlc_data(mvm, lq_sta, curr_tbl, tx_resp_rate.index, info->status.ampdu_len, info->status.ampdu_ack_len); @@ -1348,11 +1348,11 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, continue; rs_collect_tpc_data(mvm, lq_sta, tmp_tbl, - lq_rate.index, 1, + tx_resp_rate.index, 1, i < retries ? 0 : legacy_success, reduced_txp); rs_collect_tlc_data(mvm, lq_sta, tmp_tbl, - lq_rate.index, 1, + tx_resp_rate.index, 1, i < retries ? 0 : legacy_success); } From e9fb92e13d5e743a6ff13d3206c0f9e5e8cbc1f4 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Sun, 9 Jul 2017 15:51:44 +0300 Subject: [PATCH 6/8] iwlwifi: fix fw_pre_next_step to apply also for C step C step NICs should use the latest FW (currently B step). Correct the condition to make C step NICs advanced its default FW name to the latest one. Also rename _next_ to b_or_c to avoid confusion. Fixes: 5da083d1922c ("iwlwifi: add support for 9000 HW B-step NICs") Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/cfg/9000.c | 14 +++++++------- drivers/net/wireless/intel/iwlwifi/iwl-config.h | 8 ++++---- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 5 +++-- 3 files changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/9000.c b/drivers/net/wireless/intel/iwlwifi/cfg/9000.c index b4ecd1fe1374..97208ce19f92 100644 --- a/drivers/net/wireless/intel/iwlwifi/cfg/9000.c +++ b/drivers/net/wireless/intel/iwlwifi/cfg/9000.c @@ -154,7 +154,7 @@ static const struct iwl_tt_params iwl9000_tt_params = { const struct iwl_cfg iwl9160_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 9160", .fw_name_pre = IWL9260A_FW_PRE, - .fw_name_pre_next_step = IWL9260B_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9260B_FW_PRE, IWL_DEVICE_9000, .ht_params = &iwl9000_ht_params, .nvm_ver = IWL9000_NVM_VERSION, @@ -165,7 +165,7 @@ const struct iwl_cfg iwl9160_2ac_cfg = { const struct iwl_cfg iwl9260_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 9260", .fw_name_pre = IWL9260A_FW_PRE, - .fw_name_pre_next_step = IWL9260B_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9260B_FW_PRE, IWL_DEVICE_9000, .ht_params = &iwl9000_ht_params, .nvm_ver = IWL9000_NVM_VERSION, @@ -176,7 +176,7 @@ const struct iwl_cfg iwl9260_2ac_cfg = { const struct iwl_cfg iwl9270_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 9270", .fw_name_pre = IWL9260A_FW_PRE, - .fw_name_pre_next_step = IWL9260B_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9260B_FW_PRE, IWL_DEVICE_9000, .ht_params = &iwl9000_ht_params, .nvm_ver = IWL9000_NVM_VERSION, @@ -186,8 +186,8 @@ const struct iwl_cfg iwl9270_2ac_cfg = { const struct iwl_cfg iwl9460_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 9460", - .fw_name_pre = IWL9000_FW_PRE, - .fw_name_pre_rf_next_step = IWL9000RFB_FW_PRE, + .fw_name_pre = IWL9260A_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9260B_FW_PRE, IWL_DEVICE_9000, .ht_params = &iwl9000_ht_params, .nvm_ver = IWL9000_NVM_VERSION, @@ -198,8 +198,8 @@ const struct iwl_cfg iwl9460_2ac_cfg = { const struct iwl_cfg iwl9560_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 9560", - .fw_name_pre = IWL9000_FW_PRE, - .fw_name_pre_rf_next_step = IWL9000RFB_FW_PRE, + .fw_name_pre = IWL9260A_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9260B_FW_PRE, IWL_DEVICE_9000, .ht_params = &iwl9000_ht_params, .nvm_ver = IWL9000_NVM_VERSION, diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index c52623cb7c2a..d19c74827fbb 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -276,10 +276,10 @@ struct iwl_pwr_tx_backoff { * @fw_name_pre: Firmware filename prefix. The api version and extension * (.ucode) will be added to filename before loading from disk. The * filename is constructed as fw_name_pre.ucode. - * @fw_name_pre_next_step: same as @fw_name_pre, only for next step + * @fw_name_pre_b_or_c_step: same as @fw_name_pre, only for b or c steps * (if supported) - * @fw_name_pre_rf_next_step: same as @fw_name_pre_next_step, only for rf next - * step. Supported only in integrated solutions. + * @fw_name_pre_rf_next_step: same as @fw_name_pre_b_or_c_step, only for rf + * next step. Supported only in integrated solutions. * @ucode_api_max: Highest version of uCode API supported by driver. * @ucode_api_min: Lowest version of uCode API supported by driver. * @max_inst_size: The maximal length of the fw inst section @@ -330,7 +330,7 @@ struct iwl_cfg { /* params specific to an individual device within a device family */ const char *name; const char *fw_name_pre; - const char *fw_name_pre_next_step; + const char *fw_name_pre_b_or_c_step; const char *fw_name_pre_rf_next_step; /* params not likely to change within a device family */ const struct iwl_base_params *base_params; diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index 6fdb5921e17f..4e0f86fe0a6f 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -216,8 +216,9 @@ static int iwl_request_firmware(struct iwl_drv *drv, bool first) const char *fw_pre_name; if (drv->trans->cfg->device_family == IWL_DEVICE_FAMILY_9000 && - CSR_HW_REV_STEP(drv->trans->hw_rev) == SILICON_B_STEP) - fw_pre_name = cfg->fw_name_pre_next_step; + (CSR_HW_REV_STEP(drv->trans->hw_rev) == SILICON_B_STEP || + CSR_HW_REV_STEP(drv->trans->hw_rev) == SILICON_C_STEP)) + fw_pre_name = cfg->fw_name_pre_b_or_c_step; else if (drv->trans->cfg->integrated && CSR_HW_RFID_STEP(drv->trans->hw_rf_id) == SILICON_B_STEP && cfg->fw_name_pre_rf_next_step) From 8addabf8e6e299f790038fdc92ddceaaf76adab8 Mon Sep 17 00:00:00 2001 From: Naftali Goldstein Date: Thu, 27 Jul 2017 04:53:55 +0300 Subject: [PATCH 7/8] iwlwifi: mvm: set the RTS_MIMO_PROT bit in flag mask when sending sta to fw Set the STA_FLG_RTS_MIMO_PROT bit in station_flags_msk of the add sta command, so that when smps mode changes, the FW will know about it. In particular, in AP mode, clients are added upon receival of an auth request, at which point there's no knowledge of the client's smps mode. When the assoc request arrives, the add_sta command is resent to modify the station parameters. At this point the driver knows the smps mode, but since the corresponding bit in the mask is not set, the fw doesn't update this field so there's no rts protection for mimo. Fixes: 5bc5aaad407c ("iwlwifi: mvm: set up initial SMPS/NSS station info") Signed-off-by: Naftali Goldstein Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index ab66b4394dfc..dcaef7c043ac 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -121,7 +121,8 @@ int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, .mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color), .add_modify = update ? 1 : 0, .station_flags_msk = cpu_to_le32(STA_FLG_FAT_EN_MSK | - STA_FLG_MIMO_EN_MSK), + STA_FLG_MIMO_EN_MSK | + STA_FLG_RTS_MIMO_PROT), .tid_disable_tx = cpu_to_le16(mvm_sta->tid_disable_agg), }; int ret; From 558f479f687aca6a336e13309424a7c3afd32721 Mon Sep 17 00:00:00 2001 From: Tzipi Peres Date: Sun, 30 Jul 2017 13:29:30 +0300 Subject: [PATCH 8/8] iwlwifi: add the new 9000 series PCI IDs Add two PCI IDs for the 9160 series. Add five PCI IDs for the 9260 series. Add one PCI IDs for the 9270 series. Add seven PCI IDs for the 9460 series. Add five PCI IDs for the 9560 series. Signed-off-by: Tzipi Peres Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index f16c1bb9bf94..84f4ba01e14f 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -510,9 +510,17 @@ static const struct pci_device_id iwl_hw_card_ids[] = { /* 9000 Series */ {IWL_PCI_DEVICE(0x271B, 0x0010, iwl9160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x271B, 0x0014, iwl9160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x271B, 0x0210, iwl9160_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x0000, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x0010, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0014, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0xA014, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x4010, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0214, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x1410, iwl9270_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x1610, iwl9270_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x0A10, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x0010, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x0210, iwl9460_2ac_cfg)}, @@ -527,10 +535,22 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x9DF0, 0x2A10, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x30DC, 0x0060, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x0060, iwl9460_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0260, iwl9460_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0064, iwl9460_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x00A4, iwl9460_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x40A4, iwl9460_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x02A4, iwl9460_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x00A0, iwl9460_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x02A0, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x0060, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0xA370, 0x0060, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x31DC, 0x0060, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x0030, iwl9560_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x4030, iwl9560_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0230, iwl9560_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0234, iwl9560_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x0238, iwl9560_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x023C, iwl9560_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x0030, iwl9560_2ac_cfg)}, {IWL_PCI_DEVICE(0xA370, 0x0030, iwl9560_2ac_cfg)}, {IWL_PCI_DEVICE(0x31DC, 0x0030, iwl9560_2ac_cfg)},