dt-bindings: mmc: sdhci-of-dwcmshc: Add Eswin EIC7700

EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.

Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Huan He
2025-10-19 19:52:38 +08:00
committed by Ulf Hansson
parent c2afdd73e5
commit 30009a21f2

View File

@@ -30,6 +30,7 @@ properties:
- sophgo,sg2002-dwcmshc
- sophgo,sg2042-dwcmshc
- thead,th1520-dwcmshc
- eswin,eic7700-dwcmshc
reg:
maxItems: 1
@@ -52,17 +53,30 @@ properties:
maxItems: 5
reset-names:
items:
- const: core
- const: bus
- const: axi
- const: block
- const: timer
maxItems: 5
rockchip,txclk-tapnum:
description: Specify the number of delay for tx sampling.
$ref: /schemas/types.yaml#/definitions/uint8
eswin,hsp-sp-csr:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: Phandle to HSP(High-Speed Peripheral) device
- description: Offset of the stability status register for internal
clock.
- description: Offset of the stability register for host regulator
voltage.
description:
HSP CSR is to control and get status of different high-speed peripherals
(such as Ethernet, USB, SATA, etc.) via register, which can tune
board-level's parameters of PHY, etc.
eswin,drive-impedance-ohms:
description: Specifies the drive impedance in Ohm.
enum: [33, 40, 50, 66, 100]
required:
- compatible
- reg
@@ -110,6 +124,37 @@ allOf:
- const: block
- const: timer
- if:
properties:
compatible:
contains:
const: eswin,eic7700-dwcmshc
then:
properties:
resets:
minItems: 4
maxItems: 4
reset-names:
items:
- const: axi
- const: phy
- const: prstn
- const: txrx
required:
- eswin,hsp-sp-csr
- eswin,drive-impedance-ohms
else:
properties:
resets:
maxItems: 5
reset-names:
items:
- const: core
- const: bus
- const: axi
- const: block
- const: timer
- if:
properties:
compatible: