mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-10-05 01:29:54 -05:00
Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull the v3.5 RCU tree from Paul E. McKenney: 1) A set of improvements and fixes to the RCU_FAST_NO_HZ feature (with more on the way for 3.6). Posted to LKML: https://lkml.org/lkml/2012/4/23/324 (commits 1-3 and 5), https://lkml.org/lkml/2012/4/16/611 (commit 4), https://lkml.org/lkml/2012/4/30/390 (commit 6), and https://lkml.org/lkml/2012/5/4/410 (commit 7, combined with the other commits for the convenience of the tester). 2) Changes to make rcu_barrier() avoid disrupting execution of CPUs that have no RCU callbacks. Posted to LKML: https://lkml.org/lkml/2012/4/23/322. 3) A couple of commits that improve the efficiency of the interaction between preemptible RCU and the scheduler, these two being all that survived an abortive attempt to allow preemptible RCU's __rcu_read_lock() to be inlined. The full set was posted to LKML at https://lkml.org/lkml/2012/4/14/143, and the first and third patches of that set remain. 4) Lai Jiangshan's algorithmic implementation of SRCU, which includes call_srcu() and srcu_barrier(). A major feature of this new implementation is that synchronize_srcu() no longer disturbs the execution of other CPUs. This work is based on earlier implementations by Peter Zijlstra and Paul E. McKenney. Posted to LKML: https://lkml.org/lkml/2012/2/22/82. 5) A number of miscellaneous bug fixes and improvements which were posted to LKML at: https://lkml.org/lkml/2012/4/23/353 with subsequent updates posted to LKML. Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Ingo Molnar
@@ -47,6 +47,16 @@ irqreader Says to invoke RCU readers from irq level. This is currently
|
||||
permit this. (Or, more accurately, variants of RCU that do
|
||||
-not- permit this know to ignore this variable.)
|
||||
|
||||
n_barrier_cbs If this is nonzero, RCU barrier testing will be conducted,
|
||||
in which case n_barrier_cbs specifies the number of
|
||||
RCU callbacks (and corresponding kthreads) to use for
|
||||
this testing. The value cannot be negative. If you
|
||||
specify this to be non-zero when torture_type indicates a
|
||||
synchronous RCU implementation (one for which a member of
|
||||
the synchronize_rcu() rather than the call_rcu() family is
|
||||
used -- see the documentation for torture_type below), an
|
||||
error will be reported and no testing will be carried out.
|
||||
|
||||
nfakewriters This is the number of RCU fake writer threads to run. Fake
|
||||
writer threads repeatedly use the synchronous "wait for
|
||||
current readers" function of the interface selected by
|
||||
@@ -188,7 +198,7 @@ OUTPUT
|
||||
The statistics output is as follows:
|
||||
|
||||
rcu-torture:--- Start of test: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4
|
||||
rcu-torture: rtc: (null) ver: 155441 tfle: 0 rta: 155441 rtaf: 8884 rtf: 155440 rtmbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 3055767
|
||||
rcu-torture: rtc: (null) ver: 155441 tfle: 0 rta: 155441 rtaf: 8884 rtf: 155440 rtmbe: 0 rtbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 3055767
|
||||
rcu-torture: Reader Pipe: 727860534 34213 0 0 0 0 0 0 0 0 0
|
||||
rcu-torture: Reader Batch: 727877838 17003 0 0 0 0 0 0 0 0 0
|
||||
rcu-torture: Free-Block Circulation: 155440 155440 155440 155440 155440 155440 155440 155440 155440 155440 0
|
||||
@@ -230,6 +240,9 @@ o "rtmbe": A non-zero value indicates that rcutorture believes that
|
||||
rcu_assign_pointer() and rcu_dereference() are not working
|
||||
correctly. This value should be zero.
|
||||
|
||||
o "rtbe": A non-zero value indicates that one of the rcu_barrier()
|
||||
family of functions is not working correctly.
|
||||
|
||||
o "rtbke": rcutorture was unable to create the real-time kthreads
|
||||
used to force RCU priority inversion. This value should be zero.
|
||||
|
||||
|
||||
@@ -2330,18 +2330,100 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
|
||||
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
|
||||
See Documentation/blockdev/ramdisk.txt.
|
||||
|
||||
rcupdate.blimit= [KNL,BOOT]
|
||||
rcutree.blimit= [KNL,BOOT]
|
||||
Set maximum number of finished RCU callbacks to process
|
||||
in one batch.
|
||||
|
||||
rcupdate.qhimark= [KNL,BOOT]
|
||||
rcutree.qhimark= [KNL,BOOT]
|
||||
Set threshold of queued
|
||||
RCU callbacks over which batch limiting is disabled.
|
||||
|
||||
rcupdate.qlowmark= [KNL,BOOT]
|
||||
rcutree.qlowmark= [KNL,BOOT]
|
||||
Set threshold of queued RCU callbacks below which
|
||||
batch limiting is re-enabled.
|
||||
|
||||
rcutree.rcu_cpu_stall_suppress= [KNL,BOOT]
|
||||
Suppress RCU CPU stall warning messages.
|
||||
|
||||
rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
|
||||
Set timeout for RCU CPU stall warning messages.
|
||||
|
||||
rcutorture.fqs_duration= [KNL,BOOT]
|
||||
Set duration of force_quiescent_state bursts.
|
||||
|
||||
rcutorture.fqs_holdoff= [KNL,BOOT]
|
||||
Set holdoff time within force_quiescent_state bursts.
|
||||
|
||||
rcutorture.fqs_stutter= [KNL,BOOT]
|
||||
Set wait time between force_quiescent_state bursts.
|
||||
|
||||
rcutorture.irqreader= [KNL,BOOT]
|
||||
Test RCU readers from irq handlers.
|
||||
|
||||
rcutorture.n_barrier_cbs= [KNL,BOOT]
|
||||
Set callbacks/threads for rcu_barrier() testing.
|
||||
|
||||
rcutorture.nfakewriters= [KNL,BOOT]
|
||||
Set number of concurrent RCU writers. These just
|
||||
stress RCU, they don't participate in the actual
|
||||
test, hence the "fake".
|
||||
|
||||
rcutorture.nreaders= [KNL,BOOT]
|
||||
Set number of RCU readers.
|
||||
|
||||
rcutorture.onoff_holdoff= [KNL,BOOT]
|
||||
Set time (s) after boot for CPU-hotplug testing.
|
||||
|
||||
rcutorture.onoff_interval= [KNL,BOOT]
|
||||
Set time (s) between CPU-hotplug operations, or
|
||||
zero to disable CPU-hotplug testing.
|
||||
|
||||
rcutorture.shuffle_interval= [KNL,BOOT]
|
||||
Set task-shuffle interval (s). Shuffling tasks
|
||||
allows some CPUs to go into dyntick-idle mode
|
||||
during the rcutorture test.
|
||||
|
||||
rcutorture.shutdown_secs= [KNL,BOOT]
|
||||
Set time (s) after boot system shutdown. This
|
||||
is useful for hands-off automated testing.
|
||||
|
||||
rcutorture.stall_cpu= [KNL,BOOT]
|
||||
Duration of CPU stall (s) to test RCU CPU stall
|
||||
warnings, zero to disable.
|
||||
|
||||
rcutorture.stall_cpu_holdoff= [KNL,BOOT]
|
||||
Time to wait (s) after boot before inducing stall.
|
||||
|
||||
rcutorture.stat_interval= [KNL,BOOT]
|
||||
Time (s) between statistics printk()s.
|
||||
|
||||
rcutorture.stutter= [KNL,BOOT]
|
||||
Time (s) to stutter testing, for example, specifying
|
||||
five seconds causes the test to run for five seconds,
|
||||
wait for five seconds, and so on. This tests RCU's
|
||||
ability to transition abruptly to and from idle.
|
||||
|
||||
rcutorture.test_boost= [KNL,BOOT]
|
||||
Test RCU priority boosting? 0=no, 1=maybe, 2=yes.
|
||||
"Maybe" means test if the RCU implementation
|
||||
under test support RCU priority boosting.
|
||||
|
||||
rcutorture.test_boost_duration= [KNL,BOOT]
|
||||
Duration (s) of each individual boost test.
|
||||
|
||||
rcutorture.test_boost_interval= [KNL,BOOT]
|
||||
Interval (s) between each boost test.
|
||||
|
||||
rcutorture.test_no_idle_hz= [KNL,BOOT]
|
||||
Test RCU's dyntick-idle handling. See also the
|
||||
rcutorture.shuffle_interval parameter.
|
||||
|
||||
rcutorture.torture_type= [KNL,BOOT]
|
||||
Specify the RCU implementation to test.
|
||||
|
||||
rcutorture.verbose= [KNL,BOOT]
|
||||
Enable additional printk() statements.
|
||||
|
||||
rdinit= [KNL]
|
||||
Format: <full_path>
|
||||
Run specified binary instead of /init from the ramdisk,
|
||||
|
||||
Reference in New Issue
Block a user