diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d829dfcfd550..b2b555c93d43 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5794,6 +5794,7 @@ enum punit_power_well {
 #define  TRANS_DDI_FUNC_ENABLE		(1<<31)
 /* Those bits are ignored by pipe EDP since it can only connect to DDI A */
 #define  TRANS_DDI_PORT_MASK		(7<<28)
+#define  TRANS_DDI_PORT_SHIFT		28
 #define  TRANS_DDI_SELECT_PORT(x)	((x)<<28)
 #define  TRANS_DDI_PORT_NONE		(0<<28)
 #define  TRANS_DDI_MODE_SELECT_MASK	(7<<24)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index c96bc3b6c3d0..1b4748bf56fc 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -612,11 +612,10 @@ static void intel_ddi_clock_get(struct intel_encoder *encoder,
 				struct intel_crtc_config *pipe_config)
 {
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
-	enum port port = intel_ddi_get_encoder_port(encoder);
 	int link_clock = 0;
 	u32 val, pll;
 
-	val = I915_READ(PORT_CLK_SEL(port));
+	val = pipe_config->ddi_pll_sel;
 	switch (val & PORT_CLK_SEL_MASK) {
 	case PORT_CLK_SEL_LCPLL_810:
 		link_clock = 81000;
@@ -1113,40 +1112,6 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
 	return false;
 }
 
-static uint32_t intel_ddi_get_crtc_pll(struct drm_i915_private *dev_priv,
-				       enum pipe pipe)
-{
-	uint32_t temp, ret;
-	enum port port = I915_MAX_PORTS;
-	enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
-								      pipe);
-	int i;
-
-	if (cpu_transcoder == TRANSCODER_EDP) {
-		port = PORT_A;
-	} else {
-		temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
-		temp &= TRANS_DDI_PORT_MASK;
-
-		for (i = PORT_B; i <= PORT_E; i++)
-			if (temp == TRANS_DDI_SELECT_PORT(i))
-				port = i;
-	}
-
-	if (port == I915_MAX_PORTS) {
-		WARN(1, "Pipe %c enabled on an unknown port\n",
-		     pipe_name(pipe));
-		ret = PORT_CLK_SEL_NONE;
-	} else {
-		ret = I915_READ(PORT_CLK_SEL(port));
-		DRM_DEBUG_KMS("Pipe %c connected to port %c using clock "
-			      "0x%08x\n", pipe_name(pipe), port_name(port),
-			      ret);
-	}
-
-	return ret;
-}
-
 void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -1165,9 +1130,6 @@ void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
 			continue;
 		}
 
-		intel_crtc->config.ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv,
-								 pipe);
-
 		switch (intel_crtc->config.ddi_pll_sel) {
 		case PORT_CLK_SEL_WRPLL1:
 			dev_priv->ddi_plls.wrpll1_refcount++;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6332d9dda00f..e26df6783406 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7570,6 +7570,35 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	return 0;
 }
 
+static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
+				       struct intel_crtc_config *pipe_config)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum port port;
+	uint32_t tmp;
+
+	tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
+
+	port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
+
+	pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
+	/*
+	 * Haswell has only FDI/PCH transcoder A. It is which is connected to
+	 * DDI E. So just check whether this pipe is wired to DDI E and whether
+	 * the PCH transcoder is on.
+	 */
+	if ((port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
+		pipe_config->has_pch_encoder = true;
+
+		tmp = I915_READ(FDI_RX_CTL(PIPE_A));
+		pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
+					  FDI_DP_PORT_WIDTH_SHIFT) + 1;
+
+		ironlake_get_fdi_m_n_config(crtc, pipe_config);
+	}
+}
+
 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 				    struct intel_crtc_config *pipe_config)
 {
@@ -7615,22 +7644,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	if (!(tmp & PIPECONF_ENABLE))
 		return false;
 
-	/*
-	 * Haswell has only FDI/PCH transcoder A. It is which is connected to
-	 * DDI E. So just check whether this pipe is wired to DDI E and whether
-	 * the PCH transcoder is on.
-	 */
-	tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
-	if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) &&
-	    I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
-		pipe_config->has_pch_encoder = true;
-
-		tmp = I915_READ(FDI_RX_CTL(PIPE_A));
-		pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
-					  FDI_DP_PORT_WIDTH_SHIFT) + 1;
-
-		ironlake_get_fdi_m_n_config(crtc, pipe_config);
-	}
+	haswell_get_ddi_port_state(crtc, pipe_config);
 
 	intel_get_pipe_timings(crtc, pipe_config);
 
@@ -10409,6 +10423,8 @@ intel_pipe_config_compare(struct drm_device *dev,
 
 	PIPE_CONF_CHECK_I(double_wide);
 
+	PIPE_CONF_CHECK_X(ddi_pll_sel);
+
 	PIPE_CONF_CHECK_I(shared_dpll);
 	PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
 	PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);