From 739de9a1563a19459c82d0d8c4d1cc8eb55ddf4e Mon Sep 17 00:00:00 2001 From: Brad Mouring Date: Tue, 13 Mar 2018 16:32:13 -0500 Subject: [PATCH 1/4] net: macb: Reorganize macb_mii bringup The macb mii setup (mii_probe() and mii_init()) previously was somewhat interspersed, likely a result of organic growth and hacking. This change moves mii bus registration into mii_init and probing the bus for devices into mii_probe. Signed-off-by: Brad Mouring Suggested-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 79 ++++++++++++------------ 1 file changed, 41 insertions(+), 38 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index e84afcf1ecb5..4b514c705e57 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -472,8 +472,42 @@ static int macb_mii_probe(struct net_device *dev) struct macb *bp = netdev_priv(dev); struct macb_platform_data *pdata; struct phy_device *phydev; - int phy_irq; - int ret; + struct device_node *np; + int phy_irq, ret, i; + + pdata = dev_get_platdata(&bp->pdev->dev); + np = bp->pdev->dev.of_node; + ret = 0; + + if (np) { + if (of_phy_is_fixed_link(np)) { + if (of_phy_register_fixed_link(np) < 0) { + dev_err(&bp->pdev->dev, + "broken fixed-link specification\n"); + return -ENODEV; + } + bp->phy_node = of_node_get(np); + } else { + /* fallback to standard phy registration if no phy were + * found during dt phy registration + */ + if (!phy_find_first(bp->mii_bus)) { + for (i = 0; i < PHY_MAX_ADDR; i++) { + struct phy_device *phydev; + + phydev = mdiobus_scan(bp->mii_bus, i); + if (IS_ERR(phydev) && + PTR_ERR(phydev) != -ENODEV) { + ret = PTR_ERR(phydev); + break; + } + } + + if (ret) + return -ENODEV; + } + } + } if (bp->phy_node) { phydev = of_phy_connect(dev, bp->phy_node, @@ -488,7 +522,6 @@ static int macb_mii_probe(struct net_device *dev) return -ENXIO; } - pdata = dev_get_platdata(&bp->pdev->dev); if (pdata) { if (gpio_is_valid(pdata->phy_irq_pin)) { ret = devm_gpio_request(&bp->pdev->dev, @@ -533,7 +566,7 @@ static int macb_mii_init(struct macb *bp) { struct macb_platform_data *pdata; struct device_node *np; - int err = -ENXIO, i; + int err, i; /* Enable management port */ macb_writel(bp, NCR, MACB_BIT(MPE)); @@ -556,39 +589,9 @@ static int macb_mii_init(struct macb *bp) dev_set_drvdata(&bp->dev->dev, bp->mii_bus); np = bp->pdev->dev.of_node; + if (np) { - if (of_phy_is_fixed_link(np)) { - if (of_phy_register_fixed_link(np) < 0) { - dev_err(&bp->pdev->dev, - "broken fixed-link specification\n"); - goto err_out_unregister_bus; - } - bp->phy_node = of_node_get(np); - - err = mdiobus_register(bp->mii_bus); - } else { - /* try dt phy registration */ - err = of_mdiobus_register(bp->mii_bus, np); - - /* fallback to standard phy registration if no phy were - * found during dt phy registration - */ - if (!err && !phy_find_first(bp->mii_bus)) { - for (i = 0; i < PHY_MAX_ADDR; i++) { - struct phy_device *phydev; - - phydev = mdiobus_scan(bp->mii_bus, i); - if (IS_ERR(phydev) && - PTR_ERR(phydev) != -ENODEV) { - err = PTR_ERR(phydev); - break; - } - } - - if (err) - goto err_out_unregister_bus; - } - } + err = of_mdiobus_register(bp->mii_bus, np); } else { for (i = 0; i < PHY_MAX_ADDR; i++) bp->mii_bus->irq[i] = PHY_POLL; @@ -610,10 +613,10 @@ static int macb_mii_init(struct macb *bp) err_out_unregister_bus: mdiobus_unregister(bp->mii_bus); -err_out_free_mdiobus: - of_node_put(bp->phy_node); if (np && of_phy_is_fixed_link(np)) of_phy_deregister_fixed_link(np); +err_out_free_mdiobus: + of_node_put(bp->phy_node); mdiobus_free(bp->mii_bus); err_out: return err; From cb732e9a26f336ddd3e7ef4dba84ce190d1e175e Mon Sep 17 00:00:00 2001 From: Brad Mouring Date: Tue, 13 Mar 2018 16:32:14 -0500 Subject: [PATCH 2/4] net: macb: Remove redundant poll irq assignment In phy_device's general probe, this device will already be set for phy register polling, rendering this code redundant. Signed-off-by: Brad Mouring Suggested-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 4b514c705e57..db1dc301bed3 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -566,7 +566,7 @@ static int macb_mii_init(struct macb *bp) { struct macb_platform_data *pdata; struct device_node *np; - int err, i; + int err; /* Enable management port */ macb_writel(bp, NCR, MACB_BIT(MPE)); @@ -593,9 +593,6 @@ static int macb_mii_init(struct macb *bp) if (np) { err = of_mdiobus_register(bp->mii_bus, np); } else { - for (i = 0; i < PHY_MAX_ADDR; i++) - bp->mii_bus->irq[i] = PHY_POLL; - if (pdata) bp->mii_bus->phy_mask = pdata->phy_mask; From 2105a5d3acd778e20634f25950cc9254ea408efe Mon Sep 17 00:00:00 2001 From: Brad Mouring Date: Tue, 13 Mar 2018 16:32:15 -0500 Subject: [PATCH 3/4] net: macb: Add phy-handle DT support This optional binding (as described in the ethernet DT bindings doc) directs the netdev to the phydev to use. This is useful for a phy chip that has >1 phy in it, and two netdevs are using the same phy chip (i.e. the second mac's phy lives on the first mac's MDIO bus) The devicetree snippet would look something like this: ethernet@feedf00d { ... phy-handle = <&phy0> // the first netdev is physically wired to phy0 ... phy0: phy@0 { ... reg = <0x0> // MDIO address 0 ... } phy1: phy@1 { ... reg = <0x1> // MDIO address 1 ... } ... } ethernet@deadbeef { ... phy-handle = <&phy1> // tells the driver to use phy1 on the // first mac's mdio bus (it's wired thusly) ... } The work done to add the phy_node in the first place (dacdbb4dfc1a1: "net: macb: add fixed-link node support") will consume the device_node (if found). Signed-off-by: Brad Mouring Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index db1dc301bed3..d09bd43680b3 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -488,10 +488,12 @@ static int macb_mii_probe(struct net_device *dev) } bp->phy_node = of_node_get(np); } else { - /* fallback to standard phy registration if no phy were - * found during dt phy registration + bp->phy_node = of_parse_phandle(np, "phy-handle", 0); + /* fallback to standard phy registration if no + * phy-handle was found nor any phy found during + * dt phy registration */ - if (!phy_find_first(bp->mii_bus)) { + if (!bp->phy_node && !phy_find_first(bp->mii_bus)) { for (i = 0; i < PHY_MAX_ADDR; i++) { struct phy_device *phydev; From f3b249e652792290cea1db45fa58e51c69cdd68e Mon Sep 17 00:00:00 2001 From: Brad Mouring Date: Tue, 13 Mar 2018 16:32:16 -0500 Subject: [PATCH 4/4] Documentation: macb: Document phy-handle binding Document the existence of the optional binding, directing to the general ethernet document that describes this binding. Signed-off-by: Brad Mouring Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/macb.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 27966ae741e0..457d5ae16f23 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -29,6 +29,7 @@ Optional properties for PHY child node: - reset-gpios : Should specify the gpio for phy reset - magic-packet : If present, indicates that the hardware supports waking up via magic packet. +- phy-handle : see ethernet.txt file in the same directory Examples: