diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 05edf22e6c30..2a096e060ed3 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -135,6 +135,7 @@ properties: - minix,neo-u9h - nexbox,a1 - tronsmart,vega-s96 + - ugoos,am3 - videostrong,gxm-kiii-pro - wetek,core2 - const: amlogic,s912 diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index 01333ac111fb..456dbf7b5ec8 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -87,6 +87,7 @@ properties: - facebook,greatlakes-bmc - facebook,harma-bmc - facebook,minerva-cmc + - facebook,santabarbara-bmc - facebook,yosemite4-bmc - ibm,blueridge-bmc - ibm,everest-bmc @@ -98,6 +99,7 @@ properties: - inventec,starscream-bmc - inventec,transformer-bmc - jabil,rbp-bmc + - nvidia,gb200nvl-bmc - qcom,dc-scm-v1-bmc - quanta,s6q-bmc - ufispace,ncplite-bmc diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index d3b5e6923e41..a3e9f9e0735a 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -89,6 +89,7 @@ properties: - description: i.MX28 based Boards items: - enum: + - amarula,imx28-rmm - armadeus,imx28-apf28 # APF28 SoM - bluegiga,apx4devkit # Bluegiga APx4 SoM on dev board - crystalfontz,cfa10036 # Crystalfontz CFA-10036 SoM @@ -769,6 +770,15 @@ properties: - const: dh,imx6ull-dhcor-som - const: fsl,imx6ull + - description: i.MX6ULL Engicam MicroGEA SoM based boards + items: + - enum: + - engicam,microgea-imx6ull-bmm # i.MX6ULL Engicam MicroGEA BMM Board + - engicam,microgea-imx6ull-gtw # i.MX6ULL Engicam MicroGEA GTW Board + - engicam,microgea-imx6ull-rmm # i.MX6ULL Engicam MicroGEA RMM Board + - const: engicam,microgea-imx6ull # i.MX6ULL Engicam MicroGEA SoM + - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyBOARD-Segin items: - enum: @@ -1095,6 +1105,7 @@ properties: - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board + - gocontroll,moduline-display # GOcontroll Moduline Display controller - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel @@ -1395,6 +1406,13 @@ properties: - fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board - const: fsl,imx95 + - description: PHYTEC i.MX 95 FPSC based Boards + items: + - enum: + - phytec,imx95-libra-rdk-fpsc # Libra-i.MX 95 FPSC + - const: phytec,imx95-phycore-fpsc # phyCORE-i.MX 95 FPSC + - const: fsl,imx95 + - description: i.MXRT1050 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index a7e0a72f6e4c..19ed9448c9c2 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -27,6 +27,11 @@ properties: - enum: - mediatek,mt2712-evb - const: mediatek,mt2712 + - items: + - enum: + - jty,d101 + - lenovo,a369i + - const: mediatek,mt6572 - items: - enum: - mediatek,mt6580-evbp1 @@ -302,6 +307,10 @@ properties: - const: google,steelix-sku196608 - const: google,steelix - const: mediatek,mt8186 + - description: Google Squirtle (Acer Chromebook Spin 311 (R724T) + items: + - const: google,squirtle + - const: mediatek,mt8186 - description: Google Starmie (ASUS Chromebook Enterprise CM30 (CM3001)) items: - const: google,starmie-sku0 @@ -350,9 +359,6 @@ properties: - const: mediatek,mt8186 - description: Google Voltorb (Acer Chromebook 311 C723/C732T) items: - - enum: - - google,voltorb-sku589824 - - google,voltorb-sku589825 - const: google,voltorb - const: mediatek,mt8186 - items: diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 56f78f0f3803..ae43b3556580 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -209,6 +209,7 @@ properties: - samsung,hlte - sony,xperia-amami - sony,xperia-honami + - sony,xperia-togari - const: qcom,msm8974 - items: @@ -230,6 +231,11 @@ properties: - const: qcom,msm8974pro - const: qcom,msm8974 + - items: + - enum: + - longcheer,l9360 + - const: qcom,msm8976 + - items: - enum: - acer,a1-724 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 5772d905f390..28db6bd6aa5b 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -258,6 +258,11 @@ properties: - const: firefly,rk3566-roc-pc - const: rockchip,rk3566 + - description: Firefly Station M3 + items: + - const: firefly,rk3588s-roc-pc + - const: rockchip,rk3588s + - description: Firefly Station P2 items: - const: firefly,rk3568-roc-pc @@ -295,6 +300,12 @@ properties: - friendlyarm,nanopi-r4s-enterprise - const: rockchip,rk3399 + - description: FriendlyElec NanoPi M5 series boards + items: + - enum: + - friendlyarm,nanopi-m5 + - const: rockchip,rk3576 + - description: FriendlyElec NanoPi R5 series boards items: - enum: @@ -715,6 +726,13 @@ properties: - const: lckfb,tspi-rk3566 - const: rockchip,rk3566 + - description: Luckfox Core3576 Module based boards + items: + - enum: + - luckfox,omni3576 + - const: luckfox,core3576 + - const: rockchip,rk3576 + - description: Lunzn FastRhino R66S / R68S items: - enum: @@ -961,6 +979,11 @@ properties: - const: radxa,rock-s0 - const: rockchip,rk3308 + - description: Radxa ROCK 5T + items: + - const: radxa,rock-5t + - const: rockchip,rk3588 + - description: Radxa ZERO 3W/3E items: - enum: @@ -1109,6 +1132,11 @@ properties: - const: rockchip,rk3588-toybrick-x0 - const: rockchip,rk3588 + - description: Sakura Pi RK3308B + items: + - const: sakurapi,rk3308-sakurapi-rk3308b + - const: rockchip,rk3308 + - description: Sinovoip RK3308 Banana Pi P2 Pro items: - const: sinovoip,rk3308-bpi-p2pro diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml index 46c1af851be7..55b2200d6e75 100644 --- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml @@ -25,6 +25,7 @@ select: - rockchip,rk3288-pmu - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3528-pmu - rockchip,rk3562-pmu - rockchip,rk3568-pmu - rockchip,rk3576-pmu @@ -44,6 +45,7 @@ properties: - rockchip,rk3288-pmu - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3528-pmu - rockchip,rk3562-pmu - rockchip,rk3568-pmu - rockchip,rk3576-pmu diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index b3be184c7e56..26fe899badc5 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -45,6 +45,12 @@ properties: - const: samsung,aries - const: samsung,s5pv210 + - description: Exynos2200 based boards + items: + - enum: + - samsung,g0s # Samsung Galaxy S22+ (SM-S906B) + - const: samsung,exynos2200 + - description: Exynos3250 based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 408532504a24..ad144c02eb7e 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -121,6 +121,7 @@ properties: - st,stm32mp157a-dk1-scmi - st,stm32mp157c-dk2 - st,stm32mp157c-dk2-scmi + - st,stm32mp157f-dk2 - const: st,stm32mp157 - items: diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 7807ea613258..c25a22fe4d25 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -341,15 +341,11 @@ properties: - const: allwinner,i12-tvbox - const: allwinner,sun7i-a20 - - description: ICnova A20 ADB4006 + - description: ICnova A20 items: - - const: incircuit,icnova-a20-adb4006 - - const: incircuit,icnova-a20 - - const: allwinner,sun7i-a20 - - - description: ICNova A20 SWAC - items: - - const: incircuit,icnova-a20-swac + - enum: + - incircuit,icnova-a20-adb4006 + - incircuit,icnova-a20-swac - const: incircuit,icnova-a20 - const: allwinner,sun7i-a20 @@ -760,21 +756,12 @@ properties: - const: pine64,pinebook - const: allwinner,sun50i-a64 - - description: Pine64 PinePhone Developer Batch (1.0) + - description: Pine64 PinePhone items: - - const: pine64,pinephone-1.0 - - const: pine64,pinephone - - const: allwinner,sun50i-a64 - - - description: Pine64 PinePhone Braveheart (1.1) - items: - - const: pine64,pinephone-1.1 - - const: pine64,pinephone - - const: allwinner,sun50i-a64 - - - description: Pine64 PinePhone (1.2) - items: - - const: pine64,pinephone-1.2 + - enum: + - pine64,pinephone-1.0 # Developer Batch (1.0) + - pine64,pinephone-1.1 # Braveheart (1.1) + - pine64,pinephone-1.2 - const: pine64,pinephone - const: allwinner,sun50i-a64 @@ -996,6 +983,11 @@ properties: - const: xunlong,orangepi-3 - const: allwinner,sun50i-h6 + - description: Xunlong OrangePi 4A + items: + - const: xunlong,orangepi-4a + - const: allwinner,sun55i-t527 + - description: Xunlong OrangePi Lite items: - const: xunlong,orangepi-lite diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 9cae3268a827..1634dab53269 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -52,6 +52,10 @@ properties: - nvidia,cardhu-a04 - const: nvidia,cardhu - const: nvidia,tegra30 + - description: ASUS Portable AiO P1801-T + items: + - const: asus,p1801-t + - const: nvidia,tegra30 - description: ASUS Transformers Device family items: - enum: @@ -61,6 +65,10 @@ properties: - asus,tf300tl - asus,tf700t - const: nvidia,tegra30 + - description: Asus VivoTab RT + items: + - const: asus,tf600t + - const: nvidia,tegra30 - description: LG Optimus 4X P880 items: - const: lg,p880 @@ -242,5 +250,10 @@ properties: - const: nvidia,p3768-0000+p3767-0005 - const: nvidia,p3767-0005 - const: nvidia,tegra234 + - description: NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform + items: + - const: nvidia,p3971-0089+p3834-0008 + - const: nvidia,p3834-0008 + - const: nvidia,tegra264 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml index ea4fbf655220..be70819020c5 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml @@ -16,6 +16,7 @@ properties: - nvidia,tegra186-pmc - nvidia,tegra194-pmc - nvidia,tegra234-pmc + - nvidia,tegra264-pmc reg: minItems: 4 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index bf6003d8fb76..e80c653fa438 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -25,6 +25,12 @@ properties: - ti,am62a7-sk - const: ti,am62a7 + - description: K3 AM62D2 SoC and Boards + items: + - enum: + - ti,am62d2-evm + - const: ti,am62d2 + - description: K3 AM62A7 SoC PHYTEC phyBOARD-Lyra items: - const: phytec,am62a7-phyboard-lyra-rdk diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml index 3603edd7361d..aa5df4692e37 100644 --- a/Documentation/devicetree/bindings/arm/ti/omap.yaml +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml @@ -107,6 +107,7 @@ properties: - compulab,cm-t335 - moxa,uc-8100-me-t - novatech,am335x-lxm + - seeed,am335x-bone-green-eco - ti,am335x-bone - ti,am335x-evm - ti,am3359-icev2 diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml new file mode 100644 index 000000000000..993293ebc4d3 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/fsl,imx8mp-aipstz.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/fsl,imx8mp-aipstz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Secure AHB to IP Slave bus (AIPSTZ) bridge + +description: + The secure AIPS bridge (AIPSTZ) acts as a bridge for AHB masters issuing + transactions to IP Slave peripherals. Additionally, this module offers access + control configurations meant to restrict which peripherals a master can + access. + +maintainers: + - Laurentiu Mihalcea + +properties: + compatible: + const: fsl,imx8mp-aipstz + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#access-controller-cells": + const: 3 + description: + First cell - consumer ID + Second cell - consumer type (master or peripheral) + Third cell - configuration value + + ranges: true + +# borrowed from simple-bus.yaml, no additional requirements for children +patternProperties: + "@(0|[1-9a-f][0-9a-f]*)$": + type: object + additionalProperties: true + properties: + reg: + items: + minItems: 2 + maxItems: 4 + minItems: 1 + maxItems: 1024 + ranges: + oneOf: + - items: + minItems: 3 + maxItems: 7 + minItems: 1 + maxItems: 1024 + - $ref: /schemas/types.yaml#/definitions/flag + anyOf: + - required: + - reg + - required: + - ranges + +required: + - compatible + - reg + - power-domains + - "#address-cells" + - "#size-cells" + - "#access-controller-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include + #include + + bus@30df0000 { + compatible = "fsl,imx8mp-aipstz"; + reg = <0x30df0000 0x10000>; + ranges = <0x30c00000 0x30c00000 0x400000>; + power-domains = <&pgc_audio>; + #address-cells = <1>; + #size-cells = <1>; + #access-controller-cells = <3>; + + dma-controller@30e00000 { + compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; + reg = <0x30e00000 0x10000>; + #dma-cells = <3>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, + <&clk IMX8MP_CLK_AUDIO_ROOT>; + clock-names = "ipg", "ahb"; + interrupts = ; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml new file mode 100644 index 000000000000..477ee687520e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc8180x-camcc.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc8180x-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller on SC8180X + +maintainers: + - Satya Priya Kakitapalli + +description: | + Qualcomm camera clock control module provides the clocks, resets and + power domains on SC8180X. + + See also: include/dt-bindings/clock/qcom,sc8180x-camcc.h + +properties: + compatible: + const: qcom,sc8180x-camcc + + clocks: + items: + - description: Camera AHB clock from GCC + - description: Board XO source + - description: Sleep clock source + + power-domains: + maxItems: 1 + description: + A phandle and PM domain specifier for the MMCX power domain. + + required-opps: + maxItems: 1 + description: + A phandle to an OPP node describing required MMCX performance point. + +required: + - compatible + - clocks + - power-domains + - required-opps + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + clock-controller@ad00000 { + compatible = "qcom,sc8180x-camcc"; + reg = <0x0ad00000 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + power-domains = <&rpmhpd SC8180X_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml new file mode 100644 index 000000000000..cc4491f7ee5f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 clock generator + +maintainers: + - A. della Porta + +description: | + The RP1 contains a clock generator designed as three PLLs (CORE, AUDIO, + VIDEO), and each PLL output can be programmed through dividers to generate + the clocks to drive the sub-peripherals embedded inside the chipset. + + Link to datasheet: + https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf + +properties: + compatible: + const: raspberrypi,rp1-clocks + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + description: + The available clocks are defined in + include/dt-bindings/clock/raspberrypi,rp1-clocks.h. + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + - clocks + +additionalProperties: false + +examples: + - | + #include + + rp1 { + #address-cells = <2>; + #size-cells = <2>; + + clocks@c040018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0xc0 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + }; + }; diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml index a790e5687844..0dabe9bbb219 100644 --- a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml @@ -24,6 +24,7 @@ properties: - const: nvidia,tegra186-gpcdma - items: - enum: + - nvidia,tegra264-gpcdma - nvidia,tegra234-gpcdma - nvidia,tegra194-gpcdma - const: nvidia,tegra186-gpcdma diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml index b8693e4b4b0d..e610b7636a08 100644 --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml @@ -91,6 +91,9 @@ properties: - const: runstall - const: softreset + access-controllers: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml index c43d17f6e96b..3c44fe607e12 100644 --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml @@ -70,6 +70,7 @@ properties: - enum: - nvidia,tegra194-bpmp - nvidia,tegra234-bpmp + - nvidia,tegra264-bpmp - const: nvidia,tegra186-bpmp - const: nvidia,tegra186-bpmp diff --git a/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml b/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml index bbc183200400..3365124c7fd4 100644 --- a/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml +++ b/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml @@ -32,6 +32,13 @@ properties: items: - const: aon + resets: + maxItems: 1 + + reset-names: + items: + - const: gpu-clkgen + "#power-domain-cells": const: 1 diff --git a/Documentation/devicetree/bindings/gpu/apple,agx.yaml b/Documentation/devicetree/bindings/gpu/apple,agx.yaml new file mode 100644 index 000000000000..51629b3833b0 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/apple,agx.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/apple,agx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SoC GPU + +maintainers: + - Sasha Finkelstein + +properties: + compatible: + oneOf: + - enum: + - apple,agx-g13g + - apple,agx-g13s + - apple,agx-g14g + - items: + - enum: + - apple,agx-g13c + - apple,agx-g13d + - const: apple,agx-g13s + + reg: + items: + - description: GPU coprocessor control registers + - description: GPU block MMIO registers + + reg-names: + items: + - const: asc + - const: sgx + + power-domains: + maxItems: 1 + + mboxes: + maxItems: 1 + + memory-region: + items: + - description: Region containing GPU MMU TTBs + - description: Region containing GPU MMU page tables + - description: + Region containing a shared handoff structure for VM + management coordination + - description: Calibration blob. Mostly power-related configuration + - description: Calibration blob. Mostly GPU-related configuration + - description: Shared global variables with GPU firmware + + memory-region-names: + items: + - const: ttbs + - const: pagetables + - const: handoff + - const: hw-cal-a + - const: hw-cal-b + - const: globals + + apple,firmware-abi: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + description: + macOS version the current firmware is paired with, used to pick + the version of firmware ABI to be used. + Bootloader will overwrite this + +required: + - compatible + - reg + - mboxes + - memory-region + - apple,firmware-abi + +additionalProperties: false + +examples: + - | + gpu@6400000 { + compatible = "apple,agx-g13g"; + reg = <0x6400000 0x40000>, + <0x4000000 0x1000000>; + reg-names = "asc", "sgx"; + mboxes = <&agx_mbox>; + power-domains = <&ps_gfx>; + memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>, + <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>; + memory-region-names = "ttbs", "pagetables", "handoff", + "hw-cal-a", "hw-cal-b", "globals"; + + apple,firmware-abi = <0 0 0>; + }; +... diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml index 58611ba2a0f4..4d72525f407e 100644 --- a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml +++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml @@ -17,9 +17,14 @@ description: | properties: compatible: - enum: - - mediatek,mt8183-cci - - mediatek,mt8186-cci + oneOf: + - enum: + - mediatek,mt8183-cci + - mediatek,mt8186-cci + - items: + - enum: + - mediatek,mt7988-cci + - const: mediatek,mt8183-cci clocks: items: diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml index 123d24b05556..30d76692ca87 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml @@ -21,6 +21,7 @@ properties: - enum: - mediatek,mt2701-sysirq - mediatek,mt2712-sysirq + - mediatek,mt6572-sysirq - mediatek,mt6580-sysirq - mediatek,mt6582-sysirq - mediatek,mt6589-sysirq diff --git a/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml b/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml new file mode 100644 index 000000000000..8b0d71901195 --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/ipmb-dev.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The Intelligent Platform Management Bus(IPMB) Device + +description: | + The IPMB is an I2C bus which provides interconnection between a Baseboard + Management Controller(BMC) and chassis electronics. The BMC sends IPMI + requests to intelligent controllers like Satellite Management Controller(MC) + devices via IPMB and the device sends responses back to the BMC. + This device uses an I2C slave device to send and receive IPMB messages, + either on a BMC or other MC. A miscellaneous device provices a user space + program to communicate with the kernel and the backend device. Some IPMB + devices only support the I2C protocol and not the SMB protocol. + + IPMB communications protocol Specification V1.0 + https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmp-spec-v1.0.pdf + +maintainers: + - Ninad Palsule + +properties: + compatible: + enum: + - ipmb-dev + + reg: + maxItems: 1 + + i2c-protocol: + description: + Use I2C block transfer instead of SMBUS block transfer. + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ipmb-dev@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml index 2d14fc948999..d97050e40fbf 100644 --- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml @@ -64,9 +64,10 @@ properties: compatible: oneOf: - - const: nvidia,tegra186-hsp - - const: nvidia,tegra194-hsp - - const: nvidia,tegra264-hsp + - enum: + - nvidia,tegra186-hsp + - nvidia,tegra194-hsp + - nvidia,tegra264-hsp - items: - const: nvidia,tegra234-hsp - const: nvidia,tegra194-hsp @@ -76,7 +77,7 @@ properties: interrupts: minItems: 1 - maxItems: 9 + maxItems: 17 interrupt-names: oneOf: @@ -84,6 +85,25 @@ properties: - items: - const: doorbell + - items: + - const: doorbell + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - items: - const: doorbell - pattern: "^shared[0-7]$" diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index 935d63d181d9..b901f1b3e0fc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -32,6 +32,7 @@ properties: - nvidia,tegra186-mc - nvidia,tegra194-mc - nvidia,tegra234-mc + - nvidia,tegra264-mc reg: minItems: 6 @@ -42,8 +43,12 @@ properties: maxItems: 18 interrupts: - items: - - description: MC general interrupt + minItems: 1 + maxItems: 8 + + interrupt-names: + minItems: 1 + maxItems: 8 "#address-cells": const: 2 @@ -74,6 +79,7 @@ patternProperties: - nvidia,tegra186-emc - nvidia,tegra194-emc - nvidia,tegra234-emc + - nvidia,tegra264-emc reg: minItems: 1 @@ -127,6 +133,15 @@ patternProperties: reg: minItems: 2 + - if: + properties: + compatible: + const: nvidia,tegra264-emc + then: + properties: + reg: + minItems: 2 + additionalProperties: false required: @@ -158,6 +173,12 @@ allOf: - const: ch2 - const: ch3 + interrupts: + items: + - description: MC general interrupt + + interrupt-names: false + - if: properties: compatible: @@ -189,6 +210,12 @@ allOf: - const: ch14 - const: ch15 + interrupts: + items: + - description: MC general interrupt + + interrupt-names: false + - if: properties: compatible: @@ -220,6 +247,59 @@ allOf: - const: ch14 - const: ch15 + interrupts: + items: + - description: MC general interrupt + + interrupt-names: false + + - if: + properties: + compatible: + const: nvidia,tegra264-mc + then: + properties: + reg: + minItems: 17 + maxItems: 17 + description: 17 memory controller channels + + reg-names: + items: + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 + + interrupts: + minItems: 8 + maxItems: 8 + description: One interrupt line for each MC component + + interrupt-names: + items: + - const: mcf + - const: hub1 + - const: hub2 + - const: hub3 + - const: hub4 + - const: hub5 + - const: sbs + - const: channel + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml index cacb845868f4..87fcce7cbb40 100644 --- a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml @@ -20,6 +20,7 @@ properties: - nvidia,tegra186-misc - nvidia,tegra194-misc - nvidia,tegra234-misc + - nvidia,tegra264-misc reg: items: diff --git a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml new file mode 100644 index 000000000000..2f9a7a554ed8 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/pci1de4,1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 MFD PCI device + +maintainers: + - A. della Porta + +description: + The RaspberryPi RP1 is a PCI multi function device containing + peripherals ranging from Ethernet to USB controller, I2C, SPI + and others. + The peripherals are accessed by addressing the PCI BAR1 region. + +allOf: + - $ref: /schemas/pci/pci-ep-bus.yaml + +properties: + compatible: + additionalItems: true + maxItems: 3 + items: + - const: pci1de4,1 + + '#interrupt-cells': + const: 2 + description: | + Specifies respectively the interrupt number and flags as defined + in include/dt-bindings/interrupt-controller/irq.h. + Since all interrupts are active high, only IRQ_TYPE_LEVEL_HIGH + and IRQ_TYPE_EDGE_RISING can be specified as type flags. + The supported values for the interrupt number are: + - IO BANK0: 0 + - IO BANK1: 1 + - IO BANK2: 2 + - AUDIO IN: 3 + - AUDIO OUT: 4 + - PWM0: 5 + - ETH: 6 + - I2C0: 7 + - I2C1: 8 + - I2C2: 9 + - I2C3: 10 + - I2C4: 11 + - I2C5: 12 + - I2C6: 13 + - I2S0: 14 + - I2S1: 15 + - I2S2: 16 + - SDIO0: 17 + - SDIO1: 18 + - SPI0: 19 + - SPI1: 20 + - SPI2: 21 + - SPI3: 22 + - SPI4: 23 + - SPI5: 24 + - UART0: 25 + - TIMER0: 26 + - TIMER1: 27 + - TIMER2: 28 + - TIMER3: 29 + - USB HOST0: 30 + - USB HOST0-0: 31 + - USB HOST0-1: 32 + - USB HOST0-2: 33 + - USB HOST0-3: 34 + - USB HOST1: 35 + - USB HOST1-0: 36 + - USB HOST1-1: 37 + - USB HOST1-2: 38 + - USB HOST1-3: 39 + - DMA: 40 + - PWM1: 41 + - UART1: 42 + - UART2: 43 + - UART3: 44 + - UART4: 45 + - UART5: 46 + - MIPI0: 47 + - MIPI1: 48 + - VIDEO OUT: 49 + - PIO0: 50 + - PIO1: 51 + - ADC FIFO: 52 + - PCIE OUT: 53 + - SPI6: 54 + - SPI7: 55 + - SPI8: 56 + - PROC MISC: 57 + - SYSCFG: 58 + - CLOCKS DEFAULT: 59 + - VBUSCTRL: 60 + + interrupt-controller: true + +unevaluatedProperties: false + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + - pci-ep-bus@1 + +examples: + - | + pci { + #address-cells = <3>; + #size-cells = <2>; + + rp1@0,0 { + compatible = "pci1de4,1"; + ranges = <0x01 0x00 0x00000000 0x82010000 0x00 0x00 0x00 0x400000>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + pci_ep_bus: pci-ep-bus@1 { + compatible = "simple-bus"; + ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>; + dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>; + #address-cells = <2>; + #size-cells = <2>; + + rp1_clocks: clocks@40018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0x00 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml new file mode 100644 index 000000000000..eec9a9b58542 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule + +maintainers: + - A. della Porta + +description: + The RP1 chipset is a Multi Function Device containing, among other + sub-peripherals, a gpio/pinconf/mux controller whose 54 pins are grouped + into 3 banks. + It works also as an interrupt controller for those gpios. + +properties: + compatible: + const: raspberrypi,rp1-gpio + + reg: + maxItems: 3 + description: One reg specifier for each one of the 3 pin banks. + + '#gpio-cells': + description: The first cell is the pin number and the second cell is used + to specify the flags (see include/dt-bindings/gpio/gpio.h). + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + gpio-line-names: + maxItems: 54 + + interrupts: + maxItems: 3 + description: One interrupt specifier for each one of the 3 pin banks. + + '#interrupt-cells': + description: + Specifies the Bank number [0, 1, 2] and Flags as defined in + include/dt-bindings/interrupt-controller/irq.h. + const: 2 + + interrupt-controller: true + +patternProperties: + '-state$': + oneOf: + - $ref: '#/$defs/raspberrypi-rp1-state' + - patternProperties: + '-pins$': + $ref: '#/$defs/raspberrypi-rp1-state' + additionalProperties: false + +$defs: + raspberrypi-rp1-state: + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: '^gpio([0-9]|[1-4][0-9]|5[0-3])$' + + function: + enum: [ alt0, alt1, alt2, alt3, alt4, gpio, alt6, alt7, alt8, none, + aaud, dcd0, dpi, dsi0_te_ext, dsi1_te_ext, dsr0, dtr0, gpclk0, + gpclk1, gpclk2, gpclk3, gpclk4, gpclk5, i2c0, i2c1, i2c2, i2c3, + i2c4, i2c5, i2c6, i2s0, i2s1, i2s2, ir, mic, pcie_clkreq_n, + pio, proc_rio, pwm0, pwm1, ri0, sd0, sd1, spi0, spi1, spi2, + spi3, spi4, spi5, spi6, spi7, spi8, uart0, uart1, uart2, uart3, + uart4, uart5, vbus0, vbus1, vbus2, vbus3 ] + + description: + Specify the alternative function to be configured for the specified + pins. + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + input-enable: true + input-schmitt-enable: true + output-enable: true + output-high: true + output-low: true + slew-rate: + description: 0 is slow slew rate, 1 is fast slew rate + enum: [ 0, 1 ] + drive-strength: + enum: [ 2, 4, 8, 12 ] + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - reg + - compatible + - '#gpio-cells' + - gpio-controller + - interrupts + - '#interrupt-cells' + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include + + rp1 { + #address-cells = <2>; + #size-cells = <2>; + + rp1_gpio: pinctrl@c0400d0000 { + reg = <0xc0 0x400d0000 0x0 0xc000>, + <0xc0 0x400e0000 0x0 0xc000>, + <0xc0 0x400f0000 0x0 0xc000>; + compatible = "raspberrypi,rp1-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>, + <2 IRQ_TYPE_LEVEL_HIGH>; + gpio-line-names = + "ID_SDA", // GPIO0 + "ID_SCL", // GPIO1 + "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", + "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16", + "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21", + "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26", + "GPIO27", + "PCIE_RP1_WAKE", // GPIO28 + "FAN_TACH", // GPIO29 + "HOST_SDA", // GPIO30 + "HOST_SCL", // GPIO31 + "ETH_RST_N", // GPIO32 + "", // GPIO33 + "CD0_IO0_MICCLK", // GPIO34 + "CD0_IO0_MICDAT0", // GPIO35 + "RP1_PCIE_CLKREQ_N", // GPIO36 + "", // GPIO37 + "CD0_SDA", // GPIO38 + "CD0_SCL", // GPIO39 + "CD1_SDA", // GPIO40 + "CD1_SCL", // GPIO41 + "USB_VBUS_EN", // GPIO42 + "USB_OC_N", // GPIO43 + "RP1_STAT_LED", // GPIO44 + "FAN_PWM", // GPIO45 + "CD1_IO0_MICCLK", // GPIO46 + "2712_WAKE", // GPIO47 + "CD1_IO1_MICDAT1", // GPIO48 + "EN_MAX_USB_CUR", // GPIO49 + "", // GPIO50 + "", // GPIO51 + "", // GPIO52 + ""; // GPIO53 + + rp1-i2s0-default-state { + function = "i2s0"; + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + bias-disable; + }; + + rp1-uart0-default-state { + txd-pins { + function = "uart0"; + pins = "gpio14"; + bias-disable; + }; + + rxd-pins { + function = "uart0"; + pins = "gpio15"; + bias-pull-up; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml index f578be6a3bc8..a28e75a9cb6a 100644 --- a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml +++ b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml @@ -16,8 +16,10 @@ description: properties: compatible: enum: - - allwinner,sun20i-d1-ppu - allwinner,sun8i-v853-ppu + - allwinner,sun20i-d1-ppu + - allwinner,sun55i-a523-pck-600 + - allwinner,sun55i-a523-ppu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 1bf65f2a583a..7d4394a3ccbc 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -18,6 +18,7 @@ properties: oneOf: - enum: - qcom,mdm9607-rpmpd + - qcom,milos-rpmhpd - qcom,msm8226-rpmpd - qcom,msm8909-rpmpd - qcom,msm8916-rpmpd diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml index f494b7710c09..a884e49c995f 100644 --- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -40,6 +40,7 @@ properties: - rockchip,rk3366-power-controller - rockchip,rk3368-power-controller - rockchip,rk3399-power-controller + - rockchip,rk3528-power-controller - rockchip,rk3562-power-controller - rockchip,rk3568-power-controller - rockchip,rk3576-power-controller diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 2c72f148a74b..1a0cf0702a45 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -45,6 +45,7 @@ properties: - items: - enum: - amd,mbv32 + - amd,mbv64 - andestech,ax45mp - canaan,k210 - sifive,bullet0 diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml index 827983008ecf..817cbdaa2b2d 100644 --- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml +++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml @@ -20,11 +20,17 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + additionalProperties: false examples: - | + #include + rng@18032000 { compatible = "brcm,iproc-rng200"; reg = <0x18032000 0x28>; + interrupts = ; }; diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml index 17d6280e5515..a86e926ae3d1 100644 --- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml @@ -28,6 +28,7 @@ properties: - nvidia,tegra186-rtc - nvidia,tegra194-rtc - nvidia,tegra234-rtc + - nvidia,tegra264-rtc - const: nvidia,tegra20-rtc reg: diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml index 5e6e6e6208dc..f34b4986b336 100644 --- a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -388,6 +388,13 @@ properties: - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H0ASKB0F10S) - const: renesas,r8a779h0 + - description: R-Car V4M-7 (R8A779H2) + items: + - enum: + - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H2ASKB0F10SA001) + - const: renesas,r8a779h2 # ES2.x + - const: renesas,r8a779h0 + - description: R-Car H3e (R8A779M0) items: - enum: @@ -576,7 +583,7 @@ properties: - description: RZ/V2H(P) (R9A09G057) items: - enum: - - renesas,rzv2h-evk # RZ/V2H EVK + - renesas,rzv2h-evk # RZ/V2H EVK (RTK0EF0168C06001BJ) - enum: - renesas,r9a09g057h41 # RZ/V2H - renesas,r9a09g057h42 # RZ/V2H with Mali-G31 support @@ -595,7 +602,7 @@ properties: - description: RZ/T2H (R9A09G077) items: - enum: - - renesas,rzt2h-evk # RZ/T2H Evaluation Board + - renesas,rzt2h-evk # RZ/T2H Evaluation Board (RTK9RZT2H0S00000BJ) - enum: - renesas,r9a09g077m04 # RZ/T2H with Single Cortex-A55 + Dual Cortex-R52 - no security - renesas,r9a09g077m24 # RZ/T2H with Dual Cortex-A55 + Dual Cortex-R52 - no security diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index 3109df43d502..f0fb24156da9 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -203,6 +203,9 @@ allOf: then: required: - google,pmu-intr-gen-syscon + else: + properties: + google,pmu-intr-gen-syscon: false examples: - | diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index d27ed6c9d61e..d8b302f97547 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -30,6 +30,7 @@ properties: - samsung,exynos8895-fsys1-sysreg - samsung,exynos8895-peric0-sysreg - samsung,exynos8895-peric1-sysreg + - samsung,exynosautov920-hsi2-sysreg - samsung,exynosautov920-peric0-sysreg - samsung,exynosautov920-peric1-sysreg - tesla,fsd-cam-sysreg diff --git a/Documentation/devicetree/bindings/riscv/sophgo.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml similarity index 76% rename from Documentation/devicetree/bindings/riscv/sophgo.yaml rename to Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml index b4c4d7a7d7ad..1c502618de51 100644 --- a/Documentation/devicetree/bindings/riscv/sophgo.yaml +++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/riscv/sophgo.yaml# +$id: http://devicetree.org/schemas/soc/sophgo/sophgo.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sophgo SoC-based boards @@ -26,6 +26,11 @@ properties: - enum: - sophgo,huashan-pi - const: sophgo,cv1812h + - items: + - enum: + - milkv,duo-module-01-evb + - const: milkv,duo-module-01 + - const: sophgo,sg2000 - items: - enum: - sipeed,licheerv-nano-b @@ -34,6 +39,8 @@ properties: - items: - enum: - milkv,pioneer + - sophgo,sg2042-evb-v1 + - sophgo,sg2042-evb-v2 - const: sophgo,sg2042 - items: - enum: diff --git a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml index 30aaf49da03d..133a391ee68c 100644 --- a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml +++ b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml @@ -19,6 +19,9 @@ properties: - spacemit,k1-syscon-apbc - spacemit,k1-syscon-apmu - spacemit,k1-syscon-mpmu + - spacemit,k1-syscon-rcpu + - spacemit,k1-syscon-rcpu2 + - spacemit,k1-syscon-apbc2 reg: maxItems: 1 @@ -47,9 +50,6 @@ properties: required: - compatible - reg - - clocks - - clock-names - - "#clock-cells" - "#reset-cells" allOf: @@ -57,13 +57,28 @@ allOf: properties: compatible: contains: - const: spacemit,k1-syscon-apbc + enum: + - spacemit,k1-syscon-apmu + - spacemit,k1-syscon-mpmu then: - properties: - "#power-domain-cells": false - else: required: - "#power-domain-cells" + else: + properties: + "#power-domain-cells": false + - if: + properties: + compatible: + contains: + enum: + - spacemit,k1-syscon-apbc + - spacemit,k1-syscon-apmu + - spacemit,k1-syscon-mpmu + then: + required: + - clocks + - clock-names + - "#clock-cells" additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml b/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml new file mode 100644 index 000000000000..a73691cf5624 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2025 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/ti,j784s4-bist.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 BIST + +maintainers: + - Neha Malcom Francis + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: + The BIST (Built-In Self Test) module is an IP block present in K3 devices + that support triggering of BIST tests, both PBIST (Memory BIST) and LBIST + (Logic BIST) on a core. Both tests are destructive in nature. At boot, BIST + is executed by hardware for the MCU domain automatically as part of HW POST. + +properties: + compatible: + const: ti,j784s4-bist + + reg: + maxItems: 2 + + reg-names: + items: + - const: cfg + - const: ctrl_mmr + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - ti,sci-dev-id + +unevaluatedProperties: false + +examples: + - | + #include + bus { + #address-cells = <2>; + #size-cells = <2>; + safety-selftest@33c0000 { + compatible = "ti,j784s4-bist"; + reg = <0x00 0x033c0000 0x00 0x400>, + <0x00 0x0010c1a0 0x00 0x01c>; + reg-names = "cfg", "ctrl_mmr"; + clocks = <&k3_clks 237 7>; + power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>; + ti,sci-dev-id = <234>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 8a5356fe8be5..85b1e3d38024 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -789,6 +789,8 @@ patternProperties: description: Jide Tech "^joz,.*": description: JOZ BV + "^jty,.*": + description: JTY "^kam,.*": description: Kamstrup A/S "^karo,.*": @@ -893,6 +895,8 @@ patternProperties: description: Nanjing Loongmasses Ltd. "^lsi,.*": description: LSI Corp. (LSI Logic) + "^luckfox,.*": + description: Shenzhen Luckfox Technology Co., Ltd. "^lunzn,.*": description: Shenzhen Lunzn Technology Co., Ltd. "^luxul,.*": @@ -1307,6 +1311,8 @@ patternProperties: description: Recharge Véhicule Électrique (RVE) inc. "^saef,.*": description: Saef Technology Limited + "^sakurapi,.*": + description: SakuraPi.org "^samsung,.*": description: Samsung Semiconductor "^samtec,.*": diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml index 8d2520241e37..ba0bfd73ab62 100644 --- a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml @@ -34,6 +34,7 @@ properties: - items: - enum: - mediatek,mt2701-wdt + - mediatek,mt6572-wdt - mediatek,mt6582-wdt - mediatek,mt6797-wdt - mediatek,mt7622-wdt diff --git a/MAINTAINERS b/MAINTAINERS index 6d439cda15de..8b48d5bcce5f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2359,6 +2359,7 @@ F: Documentation/devicetree/bindings/clock/apple,nco.yaml F: Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml F: Documentation/devicetree/bindings/dma/apple,admac.yaml F: Documentation/devicetree/bindings/gpio/apple,smc-gpio.yaml +F: Documentation/devicetree/bindings/gpu/apple,agx.yaml F: Documentation/devicetree/bindings/i2c/apple,i2c.yaml F: Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml F: Documentation/devicetree/bindings/interrupt-controller/apple,* @@ -2442,7 +2443,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers) S: Supported Q: https://patchwork.ozlabs.org/project/linux-aspeed/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux.git F: Documentation/devicetree/bindings/arm/aspeed/ F: arch/arm/boot/dts/aspeed/ F: arch/arm/mach-aspeed/ @@ -3226,6 +3227,7 @@ F: arch/arm/mach-exynos*/ F: arch/arm/mach-s3c/ F: arch/arm/mach-s5p*/ F: arch/arm64/boot/dts/exynos/ +F: arch/arm64/boot/dts/tesla/ F: drivers/*/*/*s3c24* F: drivers/*/*s3c24* F: drivers/*/*s3c64xx* @@ -3408,6 +3410,7 @@ M: linux-fsd@tesla.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org S: Maintained +P: Documentation/process/maintainer-soc-clean-dts.rst F: arch/arm64/boot/dts/tesla/ ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS @@ -10286,6 +10289,7 @@ R: Tudor Ambarus L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org S: Maintained +P: Documentation/process/maintainer-soc-clean-dts.rst C: irc://irc.oftc.net/pixel6-kernel-dev F: Documentation/devicetree/bindings/clock/google,gs101-clock.yaml F: Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml @@ -22020,6 +22024,16 @@ B: mailto:linux-samsung-soc@vger.kernel.org F: Documentation/devicetree/bindings/sound/samsung* F: sound/soc/samsung/ +SAMSUNG EXYNOS2200 SoC SUPPORT +M: Ivaylo Ivanov +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-samsung-soc@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/clock/samsung,exynos2200-cmu.yaml +F: arch/arm64/boot/dts/exynos/exynos2200* +F: drivers/clk/samsung/clk-exynos2200.c +F: include/dt-bindings/clock/samsung,exynos2200-cmu.h + SAMSUNG EXYNOS850 SoC SUPPORT M: Sam Protsenko L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi index 186c30cbe6ee..95bd0b616349 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi @@ -56,6 +56,15 @@ i2s0_pins: i2s0-pins { function = "i2s"; }; + /omit-if-no-ref/ + lcd_rgb666_pd_pins: lcd-rgb666-pd-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", + "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", + "PD18", "PD19", "PD20", "PD21"; + function = "lcd"; + }; + uart1_pg_pins: uart1-pg-pins { pins = "PG6", "PG7"; function = "uart1"; diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi index e82cf312da25..fa54510319ac 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi @@ -411,6 +411,15 @@ i2c1_pe_pins: i2c1-pe-pins { function = "i2c1"; }; + /omit-if-no-ref/ + lcd_rgb666_pe_pins: lcd-rgb666-pe-pins { + pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", + "PE12", "PE13", "PE14", "PE15", "PE16", "PE17", + "PE18", "PE19", "PE23", "PE24"; + function = "lcd"; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index 2e5f4833a073..aba7451ab749 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-harma.dtb \ aspeed-bmc-facebook-minerva.dtb \ aspeed-bmc-facebook-minipack.dtb \ + aspeed-bmc-facebook-santabarbara.dtb \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ @@ -50,12 +51,12 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-lenovo-hr630.dtb \ aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ + aspeed-bmc-nvidia-gb200nvl-bmc.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mowgli.dtb \ aspeed-bmc-opp-nicole.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ - aspeed-bmc-opp-swift.dtb \ aspeed-bmc-opp-tacoma.dtb \ aspeed-bmc-opp-vesnin.dtb \ aspeed-bmc-opp-witherspoon.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts index 31c5d319aa0a..263702599767 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts @@ -825,7 +825,7 @@ ocp-aux-pwren-hog { line-name = "ocp-aux-pwren"; }; - bmc-ready { + bmc-ready-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts index 29c68c37e7f5..9605ccade155 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -201,13 +201,13 @@ &gfx { }; &gpio { - pin_gpio_c7 { + pin-gpio-c7-hog { gpio-hog; gpios = ; output-low; line-name = "BIOS_SPI_MUX_S"; }; - pin_gpio_d1 { + pin-gpio-d1-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts index bb2e6ef609af..93190f4e696c 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts @@ -182,7 +182,7 @@ &gpio { "CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST"; /* Assert BMC_READY so BIOS doesn't sit around waiting for it */ - bmc-ready { + bmc-ready-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts index 3f03a198a1a8..54a5509b04f1 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts @@ -915,14 +915,14 @@ fan@5 { }; &gpio { - pin_gpio_i3 { + pin-gpio-i3-hog { gpio-hog; gpios = ; output-low; line-name = "NCSI_BMC_R_SEL"; }; - pin_gpio_b6 { + pin-gpio-b6-hog { gpio-hog; gpios = ; output-low; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts index b6bfdaea08e6..cce8d0416dc8 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts @@ -395,7 +395,7 @@ &gpio { * back to one causes a power output glitch, so install a hog to keep * it at one as a failsafe to ensure nothing accidentally touches it. */ - doom-guardrail { + doom-guardrail-hog { gpio-hog; gpios = ; output-low; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts index 5be0e8fd2633..24969c82d05e 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts @@ -52,10 +52,6 @@ tpm@0 { }; }; - switchphy: ethernet-phy@0 { - // Fixed link - }; - front_gpio_leds { compatible = "gpio-leds"; sys_log_id { @@ -285,7 +281,6 @@ vbus_sled6: vbus_sled6 { &mac2 { status = "okay"; phy-mode = "rgmii"; - phy-handle = <&switchphy>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii3_default>; @@ -398,10 +393,13 @@ sled1_fusb302: typec-portc@22 { connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "source"; - data-role = "host"; - pd-disable; - typec-power-opmode = "default"; + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; }; }; @@ -484,10 +482,13 @@ sled2_fusb302: typec-portc@22 { connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "source"; - data-role = "host"; - pd-disable; - typec-power-opmode = "default"; + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; }; }; @@ -570,10 +571,13 @@ sled3_fusb302: typec-portc@22 { connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "source"; - data-role = "host"; - pd-disable; - typec-power-opmode = "default"; + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; }; }; @@ -656,10 +660,13 @@ sled4_fusb302: typec-portc@22 { connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "source"; - data-role = "host"; - pd-disable; - typec-power-opmode = "default"; + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; }; }; @@ -742,10 +749,13 @@ sled5_fusb302: typec-portc@22 { connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "source"; - data-role = "host"; - pd-disable; - typec-power-opmode = "default"; + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; }; }; @@ -828,10 +838,13 @@ sled6_fusb302: typec-portc@22 { connector { compatible = "usb-c-connector"; label = "USB-C"; - power-role = "source"; - data-role = "host"; - pd-disable; - typec-power-opmode = "default"; + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts index c151984289bc..8d786510167f 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts @@ -186,18 +186,29 @@ flash@1 { &i2c0 { status = "okay"; + multi-master; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; i2c-mux@71 { compatible = "nxp,pca9546"; reg = <0x71>; #address-cells = <1>; #size-cells = <0>; - i2c-mux-idle-disconnect; i2c0mux0ch0: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + mctp-controller; + + // IOB0 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; }; i2c0mux0ch1: i2c@1 { #address-cells = <1>; @@ -208,6 +219,13 @@ i2c0mux0ch2: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + mctp-controller; + + // IOB0 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; }; i2c0mux0ch3: i2c@3 { #address-cells = <1>; @@ -293,12 +311,18 @@ i2c-mux@75 { reg = <0x75>; #address-cells = <1>; #size-cells = <0>; - i2c-mux-idle-disconnect; i2c0mux3ch0: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + mctp-controller; + + // IOB1 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; }; i2c0mux3ch1: i2c@1 { #address-cells = <1>; @@ -309,6 +333,13 @@ i2c0mux3ch2: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + mctp-controller; + + // IOB1 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; }; i2c0mux3ch3: i2c@3 { #address-cells = <1>; @@ -404,40 +435,105 @@ i2c1mux0ch0: i2c@0 { #size-cells = <0>; reg = <0x0>; - power-sensor@41 { - compatible = "ti,ina238"; - reg = <0x41>; - shunt-resistor = <500>; - }; - power-sensor@42 { - compatible = "ti,ina238"; - reg = <0x42>; - shunt-resistor = <500>; - }; - power-sensor@44 { - compatible = "ti,ina238"; - reg = <0x44>; - shunt-resistor = <500>; + power-sensor@22 { + compatible = "mps,mp5990"; + reg = <0x22>; }; }; i2c1mux0ch1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <0x1>; - - power-sensor@41 { - compatible = "ti,ina238"; - reg = <0x41>; - }; - power-sensor@43 { - compatible = "ti,ina238"; - reg = <0x43>; - }; }; i2c1mux0ch2: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <0x2>; + + fanctl2: fan-controller@1 { + compatible = "nuvoton,nct7363"; + reg = <0x01>; + #pwm-cells = <2>; + + fan-9 { + pwms = <&fanctl2 0 40000>; + tach-ch = /bits/ 8 <0x09>; + }; + fan-11 { + pwms = <&fanctl2 0 40000>; + tach-ch = /bits/ 8 <0x0b>; + }; + fan-10 { + pwms = <&fanctl2 4 40000>; + tach-ch = /bits/ 8 <0x0a>; + }; + fan-13 { + pwms = <&fanctl2 4 40000>; + tach-ch = /bits/ 8 <0x0d>; + }; + fan-15 { + pwms = <&fanctl2 6 40000>; + tach-ch = /bits/ 8 <0x0f>; + }; + fan-1 { + pwms = <&fanctl2 6 40000>; + tach-ch = /bits/ 8 <0x01>; + }; + fan-0 { + pwms = <&fanctl2 10 40000>; + tach-ch = /bits/ 8 <0x00>; + }; + fan-3 { + pwms = <&fanctl2 10 40000>; + tach-ch = /bits/ 8 <0x03>; + }; + }; + fanctl3: fan-controller@2 { + compatible = "nuvoton,nct7363"; + reg = <0x02>; + #pwm-cells = <2>; + + fan-9 { + pwms = <&fanctl3 0 40000>; + tach-ch = /bits/ 8 <0x09>; + }; + fan-11 { + pwms = <&fanctl3 0 40000>; + tach-ch = /bits/ 8 <0x0b>; + }; + fan-10 { + pwms = <&fanctl3 4 40000>; + tach-ch = /bits/ 8 <0x0a>; + }; + fan-13 { + pwms = <&fanctl3 4 40000>; + tach-ch = /bits/ 8 <0x0d>; + }; + fan-15 { + pwms = <&fanctl3 6 40000>; + tach-ch = /bits/ 8 <0x0f>; + }; + fan-1 { + pwms = <&fanctl3 6 40000>; + tach-ch = /bits/ 8 <0x01>; + }; + fan-0 { + pwms = <&fanctl3 10 40000>; + tach-ch = /bits/ 8 <0x00>; + }; + fan-3 { + pwms = <&fanctl3 10 40000>; + tach-ch = /bits/ 8 <0x03>; + }; + }; + fanctl0: fan-controller@21{ + compatible = "maxim,max31790"; + reg = <0x21>; + }; + fanctl1: fan-controller@27{ + compatible = "maxim,max31790"; + reg = <0x27>; + }; }; i2c1mux0ch3: i2c@3 { #address-cells = <1>; @@ -449,6 +545,14 @@ i2c1mux0ch4: i2c@4 { #size-cells = <0>; reg = <0x4>; + power-monitor@13 { + compatible = "infineon,xdp710"; + reg = <0x13>; + }; + power-monitor@1c { + compatible = "infineon,xdp710"; + reg = <0x1c>; + }; power-monitor@42 { compatible = "lltc,ltc4287"; reg = <0x42>; @@ -520,6 +624,12 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + // FIO REMOTE TEMP SENSOR + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; }; }; }; @@ -626,27 +736,6 @@ i2c5mux0ch7: i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; - - power-sensor@40 { - compatible = "ti,ina230"; - reg = <0x40>; - shunt-resistor = <2000>; - }; - power-sensor@41 { - compatible = "ti,ina230"; - reg = <0x41>; - shunt-resistor = <2000>; - }; - power-sensor@44 { - compatible = "ti,ina230"; - reg = <0x44>; - shunt-resistor = <2000>; - }; - power-sensor@45 { - compatible = "ti,ina230"; - reg = <0x45>; - shunt-resistor = <2000>; - }; }; }; }; @@ -708,6 +797,12 @@ eeprom@56 { &i2c10 { status = "okay"; + multi-master; + mctp-controller; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; // OCP NIC0 TEMP temperature-sensor@1f { @@ -733,16 +828,24 @@ ssif-bmc@10 { &i2c12 { status = "okay"; + multi-master; // Module 1 FRU EEPROM eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; + + // Secondary CBC FRU EEPROM + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + }; }; &i2c13 { status = "okay"; + multi-master; // Module 0 FRU EEPROM eeprom@50 { @@ -750,18 +853,12 @@ eeprom@50 { reg = <0x50>; }; - // Left CBC FRU EEPROM + // Primary CBC FRU EEPROM eeprom@54 { compatible = "atmel,24c02"; reg = <0x54>; }; - // Right CBC FRU EEPROM - eeprom@55 { - compatible = "atmel,24c02"; - reg = <0x55>; - }; - // HMC FRU EEPROM eeprom@57 { compatible = "atmel,24c02"; @@ -835,6 +932,12 @@ io_expander14: gpio@15 { &i2c15 { status = "okay"; + multi-master; + mctp-controller; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; // OCP NIC1 TEMP temperature-sensor@1f { diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index 9cb511a846e3..b9a93f23bd0a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -218,6 +218,25 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <116 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "","", + "","", + "","", + "","", + "","", + "","", + "","fcb1-activate", + "",""; + }; }; &i2c1 { @@ -273,6 +292,25 @@ temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; }; + + gpio@12 { + compatible = "nxp,pca9555"; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <114 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "","", + "","", + "","", + "","", + "","", + "","", + "","fcb0-activate", + "",""; + }; }; &i2c3 { @@ -354,11 +392,22 @@ imux22: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + power-monitor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + }; + }; imux23: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + power-monitor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + }; }; }; }; @@ -405,6 +454,25 @@ eeprom@52 { &i2c11 { status = "okay"; + gpio@13 { + compatible = "nxp,pca9555"; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <222 IRQ_TYPE_LEVEL_LOW>; + + gpio-line-names = + "","", + "","", + "","", + "","health-mmc", + "","", + "","", + "","", + "",""; + }; + gpio@30 { compatible = "nxp,pca9555"; reg = <0x30>; @@ -480,6 +548,19 @@ eeprom@54 { compatible = "atmel,24c64"; reg = <0x54>; }; + + adc@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <1>; + }; + + adc@1f { + compatible = "ti,adc128d818"; + reg = <0x1f>; + ti,mode = /bits/ 8 <1>; + }; + }; imux30: i2c@2 { #address-cells = <1>; @@ -581,7 +662,7 @@ &gpio0 { /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","led-identify-gate","", /*V0-V7*/ "","","","", - "rtc-battery-voltage-read-enable","", + "","", "","", /*W0-W7*/ "","","","","","","","", /*X0-X7*/ "","","","","","","","", @@ -666,7 +747,7 @@ &sgpiom0 { "presence-cmm","ac-control-n", /*G0-G3 line 96-103*/ "FM_CPU_CORETYPE2","", - "FM_CPU_CORETYPE1","", + "FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable", "FM_CPU_CORETYPE0","", "FM_BOARD_REV_ID5","", /*G4-G7 line 104-111*/ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts new file mode 100644 index 000000000000..ee93a971c500 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts @@ -0,0 +1,982 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2025 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include +#include + +/ { + model = "Facebook Santabarbara BMC"; + compatible = "facebook,santabarbara-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + i2c16 = &i2c4mux0ch0; + i2c17 = &i2c4mux0ch1; + i2c18 = &i2c4mux0ch2; + i2c19 = &i2c4mux0ch3; + i2c20 = &i2c4mux0ch4; + i2c21 = &i2c4mux0ch5; + i2c22 = &i2c4mux0ch6; + i2c23 = &i2c4mux0ch7; + i2c24 = &i2c5mux0ch0; + i2c25 = &i2c5mux0ch1; + i2c26 = &i2c5mux0ch2; + i2c27 = &i2c5mux0ch3; + i2c28 = &i2c5mux1ch0; + i2c29 = &i2c5mux1ch1; + i2c30 = &i2c5mux1ch2; + i2c31 = &i2c5mux1ch3; + i2c32 = &i2c12mux0ch0; + i2c33 = &i2c12mux0ch1; + i2c34 = &i2c12mux0ch2; + i2c35 = &i2c12mux0ch3; + i2c36 = &i2c12mux0ch4; + i2c37 = &i2c12mux0ch5; + i2c38 = &i2c12mux0ch6; + i2c39 = &i2c12mux0ch7; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "power_blue"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + p3v3_bmc_aux: regulator-p3v3-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p3v3_bmc_aux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + spi_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +&adc0 { + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; + status = "okay"; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "rtc-battery-voltage-read-enable","","","BMC_READY", + "","led-identify","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "FM_MUX1_SEL_R","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "led-postcode-0","led-postcode-1", + "led-postcode-2","led-postcode-3", + "led-postcode-4","led-postcode-5", + "led-postcode-6","led-postcode-7", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "power-button","","reset-button","", + "led-power","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","power-host-control","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","", + "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1", + "FM_BOARD_BMC_REV_ID2","", + /*18C0-18C7*/ "SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","",""; +}; + +&i2c0 { + status = "okay"; + + // MB FRU + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&i2c1 { + status = "okay"; + + gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <112 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = + "FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N", + "FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N", + "FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1", + "FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE", + "CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1", + "FM_CPU0_SP7R2","FM_CPU0_SP7R3", + "FM_CPU0_SP7R4","", + "FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R"; + }; + + fan-controller@21{ + compatible = "maxim,max31790"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <116 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = + "FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N", + "FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N", + "FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B", + "CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B", + "","", + "CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N", + "FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N", + "E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT"; + }; + + gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <114 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = + "FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N", + "FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N", + "FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N", + "FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B", + "OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B", + "FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B", + "FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N", + "FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1"; + }; + + gpio@26 { + compatible = "nxp,pca9555"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&sgpiom0>; + interrupts = <118 IRQ_TYPE_LEVEL_LOW>; + gpio-line-names = + "FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N", + "FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N", + "P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT", + "P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT", + "P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R", + "P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R", + "","","",""; + }; +}; + +&i2c4 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c4mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + // HPM Board ID EEPROM + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + // SCM Board ID EEPROM + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + }; + i2c4mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c4mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c4mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + + power-monitor@42 { + compatible = "ti,ina230"; + reg = <0x42>; + shunt-resistor = <2000>; + }; + + power-monitor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + + power-monitor@46 { + compatible = "ti,ina230"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + + voltage-sensor@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + vref-supply = <&p3v3_bmc_aux>; + }; + + voltage-sensor@4a { + compatible = "ti,ads7830"; + reg = <0x4a>; + vref-supply = <&p3v3_bmc_aux>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp75"; + reg = <0x4c>; + }; + + temperature-sensor@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + }; + i2c4mux0ch4: i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c4mux0ch5: i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c4mux0ch6: i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + + power-monitor@42 { + compatible = "ti,ina230"; + reg = <0x42>; + shunt-resistor = <2000>; + }; + + power-monitor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + + power-monitor@46 { + compatible = "ti,ina230"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + + voltage-sensor@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + }; + i2c4mux0ch7: i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + // FIO FRU + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + // E1S BP FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c5mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c5mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c5mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux1ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + }; + i2c5mux1ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + }; + i2c5mux1ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + + power-monitor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + + power-monitor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + + power-monitor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + }; + i2c5mux1ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD", + "E1S_BP_SKU_ID0","E1S_BP_SKU_ID1", + "E1S_BP_SKU_ID2","E1S_BP_REV_ID0", + "E1S_BP_REV_ID1","E1S_BP_REV_ID2", + "P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N", + "P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N", + "P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N", + "P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N"; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + // Rainbow0 FRU + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + // Rainbow2 FRU + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; +}; + +&i2c9 { + status = "okay"; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + // SCM FRU + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + // BSM FRU + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&i2c10 { + status = "okay"; + + // Rainbow3 FRU + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; +}; + +&i2c11 { + status = "okay"; + + // OCP NIC TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC FRU + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c12 { + status = "okay"; + + // SWB FRU + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + i2c-mux@72 { + compatible = "nxp,pca9548"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c12mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + }; + i2c12mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@42 { + compatible = "mps,mp2971"; + reg = <0x42>; + }; + + power-monitor@43 { + compatible = "mps,mp2971"; + reg = <0x43>; + }; + }; + i2c12mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + + power-monitor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + }; + i2c12mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + + power-monitor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + }; + i2c12mux0ch4: i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@49 { + compatible = "ti,ads7830"; + reg = <0x49>; + }; + }; + i2c12mux0ch5: i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c12mux0ch6: i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c12mux0ch7: i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c13 { + status = "okay"; + + // Rainbow1 FRU + eeprom@52 { + compatible = "atmel,24c256"; + reg = <0x52>; + }; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&kcs2 { + aspeed,lpc-io-reg = <0xca8>; + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + status = "okay"; +}; + +&mac2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + use-ncsi; + status = "okay"; +}; + +&mac3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; + status = "okay"; +}; + +&sgpiom0 { + ngpios = <128>; + bus-frequency = <2000000>; + gpio-line-names = + /*in - out - in - out */ + /*A0-A3 line 0-7*/ + "PDB1_HSC_PWR_OK","power-chassis-control", + "PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT", + "PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT", + "PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT", + /*A4-A7 line 8-15*/ + "PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT", + "PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT", + "power-chassis-good","FM_MODULE_PWRGD_4B_OUT", + "PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT", + /*B0-B3 line 16-23*/ + "PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT", + "PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT", + "PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT", + "CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT", + /*B4-B7 line 24-31*/ + "PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT", + "CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT", + "FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT", + "FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT", + /*C0-C3 line 32-39*/ + "FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT", + "FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT", + "FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT", + "PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT", + /*C4-C7 line 40-47*/ + "PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT", + "PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT", + "PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT", + "FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT", + /*D0-D3 line 48-55*/ + "host0-ready","P12V_FAN7_PWRGD_OUT", + "FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT", + "FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT", + "RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT", + /*D4-D7 line 56-63*/ + "RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT", + "BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT", + "","FAN_5_PRSNT_R1_N_OUT", + "","FAN_6_PRSNT_R1_N_OUT", + /*E0-E3 line 64-71*/ + "FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT", + "FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT", + "FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT", + "FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT", + /*E4-E7 line 72-79*/ + "P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT", + "P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT", + "P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R", + "P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R", + /*F0-F3 line 80-87*/ + "FM_MODULE_PWRGD_0A","BMC_SGPIO_READY", + "OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N", + "P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N", + "PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE", + /*F4-F7 line 88-95*/ + "","CLR_CMOS", + "","I3C_SPD_MUX_FORCE_SEL", + "","FM_JTAG_HOST_SEL", + "","TRAY_PRESENT_N", + /*G0-G3 line 96-103*/ + "MB_REV_ID_0","UART_BMC_SEL0", + "MB_REV_ID_1","UART_BMC_SEL1", + "MB_REV_ID_2","SCM_USB_SEL", + "MB_SKU_ID_0","FORCE_ALL_PWRON", + /*G4-G7 line 104-111*/ + "MB_SKU_ID_1","PASSWORD_CLEAR", + "MB_SKU_ID_2","", + "MB_SKU_ID_3","", + "","BIOS_DEBUG_MODE", + /*H0-H3 line 112-119*/ + "FM_IOEXP_U538_INT_N","", + "FM_IOEXP_U539_INT_N","", + "FM_IOEXP_U540_INT_N","", + "FM_IOEXP_U541_INT_N","", + /*H4-H7 line 120-127*/ + "FM_IOEXP_PDB2_U1003_INT_N","", + "","","","","","", + /*I0-I3 line 128-135*/ + "","","","", + "PDB_IRQ_PMBUS_ALERT_ISO_R_N","", + "PDB_UV_ALERT_ISO_R_N","", + /*I4-I7 line 136-143*/ + "P12V_SCM_ADC_ALERT","", + "CPU0_REGS_I2C_ALERT_N","", + "FM_RTC_ALERT_N","", + "APML_CPU0_ALERT_R_N","", + /*J0-J3 line 144-151*/ + "SMB_RJ45_FIO_TMP_ALERT","", + "FM_SMB_ALERT_MCIO_0A_N","", + "I3C_MCIO_0B_ALERT_ISO_R_N","", + "FM_SMB_ALERT_MCIO_1A_N","", + /*J4-J7 line 152-159*/ + "I3C_MCIO_1B_ALERT_ISO_R_N","", + "FM_SMB_ALERT_MCIO_2A_N","", + "I3C_MCIO_2B_ALERT_ISO_R_N","", + "FM_SMB_ALERT_MCIO_3A_N","", + /*K0-K3 line 160-167*/ + "I3C_MCIO_3B_ALERT_ISO_R_N","", + "FM_SMB_ALERT_MCIO_4A_N","", + "I3C_MCIO_4B_ALERT_ISO_R_N","", + "","", + /*K4-K7 line 168-175*/ + "","","","","","","","", + /*L0-L3 line 176-183*/ + "FM_CPU0_THERMTRIP_N","", + "FM_CPU0_PROCHOT_N","", + "FM_CPU0_SMERR_N","", + "FM_PVDDCR_CPU0_P0_OCP_N","", + /*L4-L7 line 184-191*/ + "FM_PVDDCR_CPU1_P0_OCP_N","", + "FM_PVDDCR_SOC_P0_OCP_N","", + "FM_OCP_PWRBRK_R_N","", + "PMIC_ERROR_N","", + /*M0-M3 line 192-199*/ + "","","","","","","","", + /*M4-M7 line 200-207*/ + "","","","","","","","", + /*N0-N3 line 208-215*/ + "FM_PRSNT_CPU0_N","", + "OCP_SFF_PRSNT_N","", + "E1S_0_PRSNT_R_N","", + "E1S_BP_0_PRSNT_R_N","", + /*N4-N7 line 216-223*/ + "E1S_BP_1_PRSNT_R_N","", + "E1S_BP_2_PRSNT_R_N","", + "E1S_BP_3_PRSNT_R_N","", + "PDB_PRSNT_J311_N","", + /*O0-O3 line 224-231*/ + "PDB_PRSNT_J312_N","", + "PDB_PRSNT_J313_N","", + "PDB_PRSNT_J314_N","", + "PRSNT_RJ45_FIO_N_R","", + /*O4-O7 line 232-239*/ + "PRSNT_LEAK_CABLE_1_R_N","", + "PRSNT_LEAK_CABLE_2_R_N","", + "PRSNT_HDT_N","", + "","", + /*P0-P3 line 240-247*/ + "","","","","","","","", + /*P4-P7 line 248-255*/ + "","","","","","","",""; + status = "okay"; +}; + +// BIOS Flash +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + status = "okay"; + + flash@0 { + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <12000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + status = "okay"; + }; +}; + +// HOST BIOS Debug +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +// BMC Debug Console +&uart5 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&wdt1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index 29f224bccd63..aae789854c52 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -189,6 +189,11 @@ gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1", + "SLOT1_UART_SEL2","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; }; gpio@23 { @@ -235,6 +240,11 @@ gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1", + "SLOT2_UART_SEL2","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; }; gpio@23 { @@ -281,6 +291,11 @@ gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1", + "SLOT3_UART_SEL2","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; }; gpio@23 { @@ -327,6 +342,11 @@ gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1", + "SLOT4_UART_SEL2","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; }; gpio@23 { @@ -373,6 +393,11 @@ gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1", + "SLOT5_UART_SEL2","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; }; gpio@23 { @@ -419,6 +444,11 @@ gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1", + "SLOT6_UART_SEL2","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; }; gpio@23 { @@ -465,6 +495,11 @@ gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1", + "SLOT7_UART_SEL2","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; }; gpio@23 { @@ -511,6 +546,11 @@ gpio@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1", + "SLOT8_UART_SEL2","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","","","","",""; }; gpio@23 { diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts index 7364adc6b80d..2f5d4075a64a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts @@ -155,7 +155,7 @@ &gpio0 { /*Y0-Y7*/ "","","","","","","","", /*Z0-Z7*/ "","","","","","","",""; - usb_power { + usb-power-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts index 9961508ee872..4d9e2cd11f44 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts @@ -312,7 +312,7 @@ &gpio0 { /*Y0-Y7*/ "","","","","","","","", /*Z0-Z7*/ "","","","","","","",""; - usb_power { + usb-power-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts index 638a2c1c7892..757421bc3605 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts @@ -224,14 +224,14 @@ &gpio0 { /*Y0-Y7*/ "","","","","","","","", /*Z0-Z7*/ "","","","","","","",""; - i2c3_mux_oe_n { + i2c3-mux-oe-n-hog { gpio-hog; gpios = ; output-high; line-name = "I2C3_MUX_OE_N"; }; - usb_power { + usb-power-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts index 360b9ce3c850..c8267c97a44e 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts @@ -116,63 +116,63 @@ vga_memory: region@bf000000 { leds { compatible = "gpio-leds"; - led-0 { + led-bmc-ready { gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>; }; - led-1 { + led-bmc-hb { gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>; }; - led-2 { + led-rear-enc-fault0 { gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; }; - led-3 { + led-rear-enc-id0 { gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; }; - led-4 { + led-fan0-fault { gpios = <&pca3 5 GPIO_ACTIVE_LOW>; }; - led-5 { + led-fan1-fault { gpios = <&pca3 6 GPIO_ACTIVE_LOW>; }; - led-6 { + led-fan2-fault { gpios = <&pca3 7 GPIO_ACTIVE_LOW>; }; - led-7 { + led-fan3-fault { gpios = <&pca3 8 GPIO_ACTIVE_LOW>; }; - led-8 { + led-fan4-fault { gpios = <&pca3 9 GPIO_ACTIVE_LOW>; }; - led-9 { + led-fan5-fault { gpios = <&pca3 10 GPIO_ACTIVE_LOW>; }; - led-a { + led-fan6-fault { gpios = <&pca3 11 GPIO_ACTIVE_LOW>; }; - led-b { + led-nvmed0-fault { gpios = <&pca4 4 GPIO_ACTIVE_HIGH>; }; - led-c { + led-nvmed1-fault { gpios = <&pca4 5 GPIO_ACTIVE_HIGH>; }; - led-d { + led-nvmed2-fault { gpios = <&pca4 6 GPIO_ACTIVE_HIGH>; }; - led-e { + led-nvmed3-fault { gpios = <&pca4 7 GPIO_ACTIVE_HIGH>; }; }; @@ -355,7 +355,35 @@ &uhci { status = "okay"; }; +&pinctrl { + pinctrl_gpiol4_unbiased: gpiol4 { + pins = "C15"; + bias-disable; + }; + + pinctrl_gpiol5_unbiased: gpiol5 { + pins = "F15"; + bias-disable; + }; + + pinctrl_gpiol6_unbiased: gpiol6 { + pins = "B14"; + bias-disable; + }; + + pinctrl_gpiol7_unbiased: gpiol7 { + pins = "C14"; + bias-disable; + }; +}; + &gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiol4_unbiased + &pinctrl_gpiol5_unbiased + &pinctrl_gpiol6_unbiased + &pinctrl_gpiol7_unbiased>; + gpio-line-names = /*A0-A7*/ "","","","","","","","", /*B0-B7*/ "","","","","bmc-tpm-reset","","","", @@ -368,14 +396,14 @@ &gpio0 { /*I0-I7*/ "","","","","","","","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", - /*L0-L7*/ "","","","","","","","bmc-ready", + /*L0-L7*/ "","","","","","","","led-bmc-ready", /*M0-M7*/ "","","","","","","","", - /*N0-N7*/ "fpga-debug-enable","","","","","","","", + /*N0-N7*/ "pch-reset","","","","","flash-write-override","","", /*O0-O7*/ "","","","","","","","", - /*P0-P7*/ "","","","","","","","bmc-hb", + /*P0-P7*/ "","","","","","","","led-bmc-hb", /*Q0-Q7*/ "","","","","","","pch-ready","", /*R0-R7*/ "","","","","","","","", - /*S0-S7*/ "","","","","","","rear-enc-fault0","rear-enc-id0", + /*S0-S7*/ "","","","","","","led-rear-enc-fault0","led-rear-enc-id0", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","rtc-battery-voltage-read-enable","","power-chassis-control","","","","", @@ -383,6 +411,34 @@ &gpio0 { /*X0-X7*/ "fpga-pgood","power-chassis-good","pch-pgood","","","","","", /*Y0-Y7*/ "","","","","","","","", /*Z0-Z7*/ "","","","","","","",""; + + pin-gpio-hog-0 { + gpio-hog; + gpios = ; + input; + line-name = "RST_RTCRST_N"; + }; + + pin-gpio-hog-1 { + gpio-hog; + gpios = ; + input; + line-name = "RST_SRTCRST_N"; + }; + + pin-gpio-hog-2 { + gpio-hog; + gpios = ; + output-high; + line-name = "BMC_FAN_E3_SVC_PEX_INT_N"; + }; + + pin-gpio-hog-3 { + gpio-hog; + gpios = ; + output-low; + line-name = "isolate_errs_cpu1"; + }; }; &emmc_controller { @@ -401,7 +457,7 @@ &emmc { &sgpiom0 { status = "okay"; ngpios = <128>; - bus-frequency = <1000000>; + bus-frequency = <500000>; }; &ibt { @@ -486,23 +542,6 @@ eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; - - regulator@60 { - compatible = "maxim,max8952"; - reg = <0x60>; - - max8952,default-mode = <0>; - max8952,dvs-mode-microvolt = <1250000>, <1200000>, - <1050000>, <950000>; - max8952,sync-freq = <0>; - max8952,ramp-speed = <0>; - - regulator-name = "VR_v77_1v4"; - regulator-min-microvolt = <770000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; }; &i2c1 { @@ -763,6 +802,15 @@ i2c3mux0chn7: i2c@7 { &i2c4 { status = "okay"; + multi-master; + bus-frequency = <1000000>; + + ipmb@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + + i2c-protocol; + }; }; &i2c5 { @@ -1189,23 +1237,6 @@ eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; }; - - regulator@60 { - compatible = "maxim,max8952"; - reg = <0x60>; - - max8952,default-mode = <0>; - max8952,dvs-mode-microvolt = <1250000>, <1200000>, - <1050000>, <950000>; - max8952,sync-freq = <0>; - max8952,ramp-speed = <0>; - - regulator-name = "VR_v77_1v4"; - regulator-min-microvolt = <770000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; }; &i2c11 { diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts index ddbcbc64e235..4ad0f44af1ab 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts @@ -405,161 +405,161 @@ fan@13 { &gpio { - pin_gpio_b5 { + pin-gpio-b5-hog { gpio-hog; gpios = ; output-high; line-name = "IRQ_BMC_PCH_SMI_LPC_N"; }; - pin_gpio_f0 { + pin-gpio-f0-hog { gpio-hog; gpios = ; output-low; line-name = "IRQ_BMC_PCH_NMI_R"; }; - pin_gpio_f3 { + pin-gpio-f3-hog { gpio-hog; gpios = ; output-high; line-name = "I2C_BUS0_RST_OUT_N"; }; - pin_gpio_f4 { + pin-gpio-f4-hog { gpio-hog; gpios = ; output-low; line-name = "FM_SKT0_FAULT_LED"; }; - pin_gpio_f5 { + pin-gpio-f5-hog { gpio-hog; gpios = ; output-low; line-name = "FM_SKT1_FAULT_LED"; }; - pin_gpio_g4 { + pin-gpio-g4-hog { gpio-hog; gpios = ; output-high; line-name = "FAN_PWR_CTL_N"; }; - pin_gpio_g7 { + pin-gpio-g7-hog { gpio-hog; gpios = ; output-high; line-name = "RST_BMC_PCIE_I2CMUX_N"; }; - pin_gpio_h2 { + pin-gpio-h2-hog { gpio-hog; gpios = ; output-high; line-name = "PSU1_FFS_N_R"; }; - pin_gpio_h3 { + pin-gpio-h3-hog { gpio-hog; gpios = ; output-high; line-name = "PSU2_FFS_N_R"; }; - pin_gpio_i3 { + pin-gpio-i3-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_INTRUDED_COVER"; }; - pin_gpio_j2 { + pin-gpio-j2-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_BIOS_UPDATE_N"; }; - pin_gpio_j3 { + pin-gpio-j3-hog { gpio-hog; gpios = ; output-high; line-name = "RST_BMC_HDD_I2CMUX_N"; }; - pin_gpio_s2 { + pin-gpio-s2-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_VGA_SW"; }; - pin_gpio_s4 { + pin-gpio-s4-hog { gpio-hog; gpios = ; output; line-name = "VBAT_EN_N"; }; - pin_gpio_s6 { + pin-gpio-s6-hog { gpio-hog; gpios = ; output-high; line-name = "PU_BMC_GPIOS6"; }; - pin_gpio_y0 { + pin-gpio-y0-hog { gpio-hog; gpios = ; output-low; line-name = "BMC_NCSI_MUX_CTL_S0"; }; - pin_gpio_y1 { + pin-gpio-y1-hog { gpio-hog; gpios = ; output-low; line-name = "BMC_NCSI_MUX_CTL_S1"; }; - pin_gpio_z0 { + pin-gpio-z0-hog { gpio-hog; gpios = ; output-high; line-name = "I2C_RISER2_INT_N"; }; - pin_gpio_z2 { + pin-gpio-z2-hog { gpio-hog; gpios = ; output-high; line-name = "I2C_RISER2_RESET_N"; }; - pin_gpio_z3 { + pin-gpio-z3-hog { gpio-hog; gpios = ; output-high; line-name = "FM_BMC_PCH_SCI_LPC_N"; }; - pin_gpio_z7 { + pin-gpio-z7-hog { gpio-hog; gpios = ; output-low; line-name = "BMC_POST_CMPLT_N"; }; - pin_gpio_aa0 { + pin-gpio-aa0-hog { gpio-hog; gpios = ; output-low; line-name = "HOST_BMC_USB_SEL"; }; - pin_gpio_aa5 { + pin-gpio-aa5-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts index 6045b60b80da..de61eac54585 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts @@ -425,238 +425,238 @@ fan@16 { &gpio { - pin_gpio_a1 { + pin-gpio-a1-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_EMMC_RST_N"; }; - pin_gpio_a3 { + pin-gpio-a3-hog { gpio-hog; gpios = ; output-high; line-name = "PCH_PWROK_BMC_FPGA"; }; - pin_gpio_b5 { + pin-gpio-b5-hog { gpio-hog; gpios = ; output-high; line-name = "IRQ_BMC_PCH_SMI_LPC_N"; }; - pin_gpio_b7 { + pin-gpio-b7-hog { gpio-hog; gpios = ; output-low; line-name = "CPU_SM_WP"; }; - pin_gpio_e0 { + pin-gpio-e0-hog { gpio-hog; gpios = ; input; line-name = "PDB_PSU_SEL"; }; - pin_gpio_e2 { + pin-gpio-e2-hog { gpio-hog; gpios = ; output-high; line-name = "LOCATOR_LED_N"; }; - pin_gpio_e5 { + pin-gpio-e5-hog { gpio-hog; gpios = ; output-high; line-name = "FM_BMC_DBP_PRESENT_R1_N"; }; - pin_gpio_e6 { + pin-gpio-e6-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_ME_SECURITY_OVERRIDE_N"; }; - pin_gpio_f0 { + pin-gpio-f0-hog { gpio-hog; gpios = ; output-high; line-name = "IRQ_BMC_PCH_NMI_R"; }; - pin_gpio_f1 { + pin-gpio-f1-hog { gpio-hog; gpios = ; input; line-name = "CPU2_PROCDIS_BMC_N"; }; - pin_gpio_f2 { + pin-gpio-f2-hog { gpio-hog; gpios = ; output-high; line-name = "RM_THROTTLE_EN_N"; }; - pin_gpio_f3 { + pin-gpio-f3-hog { gpio-hog; gpios = ; output-low; line-name = "FM_PMBUS_ALERT_B_EN"; }; - pin_gpio_f4 { + pin-gpio-f4-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_FORCE_NM_THROTTLE_N"; }; - pin_gpio_f6 { + pin-gpio-f6-hog { gpio-hog; gpios = ; output-high; line-name = "FM_BMC_CPU_PWR_DEBUG_N"; }; - pin_gpio_g7 { + pin-gpio-g7-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_PCIE_I2C_MUX_RST_N"; }; - pin_gpio_h6 { + pin-gpio-h6-hog { gpio-hog; gpios = ; output-high; line-name = "FM_BMC_DBP_PRESENT_R2_N"; }; - pin_gpio_i3 { + pin-gpio-i3-hog { gpio-hog; gpios = ; output-high; line-name = "SPI_BMC_BIOS_WP_N"; }; - pin_gpio_j1 { + pin-gpio-j1-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_USB_SEL"; }; - pin_gpio_j2 { + pin-gpio-j2-hog { gpio-hog; gpios = ; output-high; line-name = "PDB_SMB_RST_N"; }; - pin_gpio_j3 { + pin-gpio-j3-hog { gpio-hog; gpios = ; output-high; line-name = "SPI_BMC_BIOS_HOLD_N"; }; - pin_gpio_l0 { + pin-gpio-l0-hog { gpio-hog; gpios = ; output-high; line-name = "PDB_FAN_TACH_SEL"; }; - pin_gpio_l1 { + pin-gpio-l1-hog { gpio-hog; gpios = ; output-high; line-name = "SYS_RESET_BMC_FPGA_N"; }; - pin_gpio_l4 { + pin-gpio-l4-hog { gpio-hog; gpios = ; output-high; line-name = "FM_EFUSE_FAN_G1_EN"; }; - pin_gpio_l5 { + pin-gpio-l5-hog { gpio-hog; gpios = ; output-high; line-name = "FM_EFUSE_FAN_G2_EN"; }; - pin_gpio_r6 { + pin-gpio-r6-hog { gpio-hog; gpios = ; input; line-name = "CPU3_PROCDIS_BMC_N"; }; - pin_gpio_r7 { + pin-gpio-r7-hog { gpio-hog; gpios = ; input; line-name = "CPU4_PROCDIS_BMC_N"; }; - pin_gpio_s1 { + pin-gpio-s1-hog { gpio-hog; gpios = ; output-low; line-name = "DBP_SYSPWROK_BMC"; }; - pin_gpio_s2 { + pin-gpio-s2-hog { gpio-hog; gpios = ; output-high; line-name = "PCH_RST_RSMRST_N"; }; - pin_gpio_s6 { + pin-gpio-s6-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_HW_STRAP_5"; }; - pin_gpio_z3 { + pin-gpio-z3-hog { gpio-hog; gpios = ; output-high; line-name = "FM_BMC_PCH_SCI_LPC_N"; }; - pin_gpio_aa0 { + pin-gpio-aa0-hog { gpio-hog; gpios = ; output-low; line-name = "FW_PSU_ALERT_EN_N"; }; - pin_gpio_aa4 { + pin-gpio-aa4-hog { gpio-hog; gpios = ; output-high; line-name = "DBP_CPU_PREQ_N"; }; - pin_gpio_ab3 { + pin-gpio-ab3-hog { gpio-hog; gpios = ; output-low; line-name = "BMC_WDTRST"; }; - pin_gpio_ac6 { + pin-gpio-ac6-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts new file mode 100644 index 000000000000..41e3e9dd85f5 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts @@ -0,0 +1,1128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include +#include +#include + +/ { + model = "AST2600 GB200NVL BMC"; + compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600"; + + aliases { + serial2 = &uart3; + serial4 = &uart5; + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + i2c40 = &e1si2c0; + i2c41 = &e1si2c1; + i2c42 = &e1si2c2; + i2c43 = &e1si2c3; + i2c44 = &e1si2c4; + i2c45 = &e1si2c5; + i2c46 = &e1si2c6; + i2c47 = &e1si2c7; + i2c48 = &i2c17mux0; + i2c49 = &i2c17mux1; + i2c50 = &i2c17mux2; + i2c51 = &i2c17mux3; + i2c52 = &i2c25mux0; + i2c53 = &i2c25mux1; + i2c54 = &i2c25mux2; + i2c55 = &i2c25mux3; + i2c56 = &i2c29mux0; + i2c57 = &i2c29mux1; + i2c58 = &i2c29mux2; + i2c59 = &i2c29mux3; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + ramoops@a0000000 { + compatible = "ramoops"; + reg = <0xa0000000 0x100000>; /* 1MB */ + record-size = <0x10000>; /* 64KB */ + max-reason = <2>; /* KMSG_DUMP_OOPS */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "uid_led"; + gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>; + }; + led-1 { + label = "fault_led"; + gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>; + }; + led-2 { + label = "power_led"; + gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>; + }; + }; + + buttons { + button-power { + label = "power-btn"; + gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>; + }; + button-uid { + label = "uid-btn"; + gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>; + }; + }; +}; + +// Enable Primary flash on FMC for bring up activity +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + compatible = "jedec,spi-nor"; + label = "bmc"; + spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + // 896KB + reg = <0x0 0xe0000>; + label = "u-boot"; + }; + + kernel@100000 { + // 9MB + reg = <0x100000 0x900000>; + label = "kernel"; + }; + + rofs@a00000 { + // 55292KB (extends to end of 64MB SPI - 4KB) + reg = <0xa00000 0x35FF000>; + label = "rofs"; + }; + }; + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + + // Data SPI is 64MB in size + flash@0 { + status = "okay"; + label = "config"; + spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot-env@0 { + // 256KB + reg = <0x0 0x40000>; + label = "u-boot-env"; + }; + + rwfs@40000 { + // 16MB + reg = <0x40000 0x1000000>; + label = "rwfs"; + }; + + log@1040000 { + // 40MB + reg = <0x1040000 0x2800000>; + label = "log"; + }; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + // Enabling SOL + status = "okay"; +}; + +&uart5 { + // BMC Debug Console + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&mac2 { + status = "okay"; + phy-mode = "rmii"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; +}; + +/* + * Enable USB port A as device (via the virtual hub) to host + */ +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +// USB 2.0 to HMC, on USB Port B +&ehci1 { + status = "okay"; +}; + +// USB 1.0 +&uhci { + status = "okay"; +}; + +&sgpiom0 { + status="okay"; + ngpios = <128>; + gpio-line-names = + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O", + "RUN_POWER_PG-I","PWR_BRAKE_L-O", + "SYS_RST_OUT_L-I","RUN_POWER_EN-O", + "L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O", + "L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O", + "SHDN_OK_L-I","UID_LED_N-O", + "BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O", + "BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O", + "FPGA_RSVD_FFU3-I","", + "FPGA_RSVD_FFU2-I","", + "FPGA_RSVD_FFU1-I","", + "FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O", + "CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O", + "SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O", + "THERM_BB_WARN_L-I","UART_MUX_SEL-O", + "THERM_BB_OVERT_L-I","", + "CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O", + "CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O", + "CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O", + "CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O", + "CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O", + "CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O", + "CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O", + "CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O", + "CPU1_UPHY3_PRSNT1_L-I","", + "CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS", + "CPU1_UPHY2_PRSNT1_L-I","", + "CPU1_UPHY2_PRSNT0_L-I","", + "CPU1_UPHY1_PRSNT1_L-I","", + "CPU1_UPHY1_PRSNT0_L-I","", + "CPU1_UPHY0_PRSNT1_L-I","", + "CPU1_UPHY0_PRSNT0_L-I","", + "FAN1_PRESENT_L-I","", + "FAN0_PRESENT_L-I","", + "","", + "IPEX_CABLE_PRSNT_L-I","", + "M2_1_PRSNT_L-I","", + "M2_0_PRSNT_L-I","", + "CPU1_UPHY4_PRSNT1_L-I","", + "CPU0_UPHY4_PRSNT0_L-I","", + "","", + "I2C_RTC_ALERT_L-I","", + "FAN7_PRESENT_L-I","", + "FAN6_PRESENT_L-I","", + "FAN5_PRESENT_L-I","", + "FAN4_PRESENT_L-I","", + "FAN3_PRESENT_L-I","", + "FAN2_PRESENT_L-I","", + "IOBRD0_IOX_INT_L-I","", + "IOBRD1_PRSNT_L-I","", + "IOBRD0_PRSNT_L-I","", + "IOBRD1_PWR_GOOD-I","", + "IOBRD0_PWR_GOOD-I","", + "","", + "","", + "FAN_FAIL_IN_L-I","", + "","", + "","", + "","", + "PDB_CABLE_PRESENT_L-I","", + "","", + "CHASSIS_PWR_BRK_L-I","", + "","", + "IOBRD1_IOX_INT_L-I","", + "10GBE_SMBALRT_L-I","", + "PCIE_WAKE_L-I","", + "I2C_M21_ALERT_L-I","", + "I2C_M20_ALERT_L-I","", + "TRAY_FAST_SHDN_L-I","", + "UID_BTN_N-I","", + "PWR_BTN_L-I","", + "PSU_SMB_ALERT_L-I","", + "","", + "","", + "NODE_LOC_ID[0]-I","", + "NODE_LOC_ID[1]-I","", + "NODE_LOC_ID[2]-I","", + "NODE_LOC_ID[3]-I","", + "NODE_LOC_ID[4]-I","", + "NODE_LOC_ID[5]-I","", + "FAN10_PRESENT_L-I","", + "FAN9_PRESENT_L-I","", + "FAN8_PRESENT_L-I","", + "FPGA1_READY_HMC-I","", + "DP_HPD-I","", + "HMC_I2C3_FPGA_ALERT_L-I","", + "HMC_I2C2_FPGA_ALERT_L-I","", + "FPGA0_READY_HMC-I","", + "","", + "","", + "","", + "","", + "LEAK_DETECT_ALERT_L-I","", + "MOD1_B2B_CABLE_PRESENT_L-I","", + "MOD1_CLINK_CABLE_PRESENT_L-I","", + "FAN11_PRESENT_L-I","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "","", + "RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]", + "RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]", + "RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]", + "RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]", + "RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]", + "RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]", + "RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]", + "RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]"; +}; + +// I2C1, SSIF IPMI interface +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +// I2C2 +// BMC_I2C1_FPGA - Secondary FPGA +// HMC EROT +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + multi-master; +}; + +// I2C3 +// BMC_I2C0_FPGA - Primary FPGA +// HMC FRU EEPROM +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + multi-master; +}; + +// I2C4 +&i2c3 { + status = "disabled"; +}; + +// I2C5 +// RTC Driver +// IO Expander +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + // Module 0, Expander @0x21 + exp4: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + gpio-line-names = + "RTC_MUX_SEL-O", + "PCI_MUX_SEL-O", + "TPM_MUX_SEL-O", + "FAN_MUX-SEL-O", + "SGMII_MUX_SEL-O", + "DP_MUX_SEL-O", + "UPHY3_USB_SEL-O", + "NCSI_MUX_SEL-O", + "BMC_PHY_RST-O", + "RTC_CLR_L-O", + "BMC_12V_CTRL-O", + "PS_RUN_IO0_PG-I", + "", + "", + "", + ""; + }; +}; + +// I2C6 +// Module 0/1 I2C MUX x3 +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + multi-master; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + i2c-mux@74 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c-mux-idle-disconnect; + + i2c17mux0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c17mux1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c17mux2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c17mux3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + imux20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "RST_CX_0_L-O", + "RST_CX_1_L-O", + "CX0_SSD0_PRSNT_L-I", + "CX1_SSD1_PRSNT_L-I", + "CX_BOOT_CMPLT_CX0-I", + "CX_BOOT_CMPLT_CX1-I", + "CX_TWARN_CX0_L-I", + "CX_TWARN_CX1_L-I", + "CX_OVT_SHDN_CX0-I", + "CX_OVT_SHDN_CX1-I", + "FNP_L_CX0-O", + "FNP_L_CX1-O", + "", + "MCU_GPIO-I", + "MCU_RST_N-O", + "MCU_RECOVERY_N-O"; + }; + }; + + imux22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c25mux0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c25mux1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c25mux2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c25mux3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@75 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c-mux-idle-disconnect; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + i2c-mux@74 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c-mux-idle-disconnect; + + i2c29mux0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c29mux1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c29mux2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c29mux3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + imux30: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux31: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@76 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SEC_RST_CX_0_L-O", + "SEC_RST_CX_1_L-O", + "SEC_CX0_SSD0_PRSNT_L-I", + "SEC_CX1_SSD1_PRSNT_L-I", + "SEC_CX_BOOT_CMPLT_CX0-I", + "SEC_CX_BOOT_CMPLT_CX1-I", + "SEC_CX_TWARN_CX0_L-I", + "SEC_CX_TWARN_CX1_L-I", + "SEC_CX_OVT_SHDN_CX0-I", + "SEC_CX_OVT_SHDN_CX1-I", + "SEC_FNP_L_CX0-O", + "SEC_FNP_L_CX1-O", + "", + "SEC_MCU_GPIO-I", + "SEC_MCU_RST_N-O", + "SEC_MCU_RECOVERY_N-O"; + }; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + imux36: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux37: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux38: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux39: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +// I2C7 +// Module 0/1 Leak Sensors +// Module 0/1 Fan Controllers +&i2c6 { + status = "okay"; + clock-frequency = <400000>; + + pmic@12 { + compatible = "ti,lm5066i"; + reg = <0x12>; + shunt-resistor-micro-ohms = <190>; + status = "okay"; + }; + + pmic@14 { + compatible = "ti,lm5066i"; + reg = <0x14>; + shunt-resistor-micro-ohms = <190>; + status = "okay"; + }; + + pwm@20 { + compatible = "maxim,max31790"; + reg = <0x20>; + }; + + pwm@23 { + compatible = "maxim,max31790"; + reg = <0x23>; + }; + + pwm@2c { + compatible = "maxim,max31790"; + reg = <0x2c>; + }; + + pwm@2f { + compatible = "maxim,max31790"; + reg = <0x2f>; + }; +}; + +// I2C9 +// M.2 +&i2c8 { + status = "okay"; + clock-frequency = <400000>; + multi-master; +}; + +// I2C10 +// HMC IO Expander +// Module 0/1 IO Expanders +&i2c9 { + status = "okay"; + clock-frequency = <400000>; + + // Module 0, Expander @0x20 + exp0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + gpio-line-names = + "FPGA_THERM_OVERT_L-I", + "FPGA_READY_BMC-I", + "HMC_BMC_DETECT-O", + "HMC_PGOOD-O", + "", + "BMC_STBY_CYCLE-O", + "FPGA_EROT_FATAL_ERROR_L-I", + "WP_HW_EXT_CTRL_L-O", + "EROT_FPGA_RST_L-O", + "FPGA_EROT_RECOVERY_L-O", + "BMC_EROT_FPGA_SPI_MUX_SEL-O", + "USB_HUB_RESET_L-O", + "NCSI_CS1_SEL-O", + "SGPIO_EN_L-O", + "B2B_IOEXP_INT_L-I", + "I2C_BUS_MUX_RESET_L-O"; + }; + + // Module 1, Expander @0x21 + exp1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + gpio-line-names = + "SEC_FPGA_THERM_OVERT_L-I", + "SEC_FPGA_READY_BMC-I", + "", + "", + "", + "", + "SEC_FPGA_EROT_FATAL_ERROR_L-I", + "SEC_WP_HW_EXT_CTRL_L-O", + "SEC_EROT_FPGA_RST_L-O", + "SEC_FPGA_EROT_RECOVERY_L-O", + "SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O", + "SEC_USB2_HUB_RST_L-O", + "", + "", + "", + "SEC_I2C_BUS_MUX_RESET_L-O"; + }; + + // HMC Expander @0x27 + exp2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + gpio-line-names = + "HMC_PRSNT_L-I", + "HMC_READY-I", + "HMC_EROT_FATAL_ERROR_L-I", + "I2C_MUX_SEL-O", + "HMC_EROT_SPI_MUX_SEL-O", + "HMC_EROT_RECOVERY_L-O", + "HMC_EROT_RST_L-O", + "GLOBAL_WP_HMC-O", + "FPGA_RST_L-O", + "USB2_HUB_RST-O", + "CPU_UART_MUX_SEL-O", + "", + "", + "", + "", + ""; + }; + + // HMC Expander @0x74 + exp3: gpio@74 { + compatible = "nxp,pca9555"; + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = ; + gpio-line-names = + "IOB_PRSNT_L", + "IOB_DP_HPD", + "IOX_BMC_RESET", + "IOB_IOEXP_INT_L", + "IOB_UID_LED_L", + "IOB_UID_BTN_L", + "IOB_SYS_RST_BTN_L", + "IOB_PWR_LED_L", + "IOB_PWR_BTN_L", + "IOB_PHY_RST", + "CPLD_JTAG_MUX_SEL", + "", + "", + "", + "", + ""; + }; +}; + +// I2C11 +// BMC FRU EEPROM +// BMC Temp Sensor +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + // BMC FRU EEPROM - 256 bytes + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +// I2C12 +&i2c11 { + status = "disabled"; +}; + +// I2C13 +&i2c12 { + status = "disabled"; +}; + +// I2C14 +// Module 0 UPHY3 SMBus +&i2c13 { + status = "disabled"; +}; + +// I2C15 +// Module 1 UPHY3 SMBus +&i2c14 { + status = "okay"; + clock-frequency = <100000>; + multi-master; + + //E1.S drive slot 0-3 + i2c-mux@77 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + e1si2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + e1si2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + e1si2c2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + e1si2c3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +// I2C16 +&i2c15 { + status = "okay"; + clock-frequency = <100000>; + multi-master; + + //E1.S drive slot 4-7 + i2c-mux@77 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + e1si2c4: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + e1si2c5: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + e1si2c6: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + e1si2c7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&rng { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "", "", "", "", "", "", "", "", + /*B0-B7*/ "", "", "", "", "", "", "", "", + /*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "", + /*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "", + /*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I", "", "UART3_MUX_SEL-O", + "", "", "", "SGPIO_BMC_EN-O", + /*F0-F7*/ "", "", "", "", "", "", "", "", + /*G0-G7*/ "", "", "", "", "", "", "", "", + /*H0-H7*/ "", "", "", "", "", "", "", "", + /*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O", + /*J0-J7*/ "", "", "", "", "", "", "", "", + /*K0-K7*/ "", "", "", "", "", "", "", "", + /*L0-L7*/ "", "", "", "", "", "", "", "", + /*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "HMC_RESET_L-O", "STBY_POWER_EN-O", + "STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "", + /*N0-N7*/ "", "", "", "", "", "", "", "", + /*O0-O7*/ "", "", "", "", "", "", "", "", + /*P0-P7*/ "", "", "", "", "", "", "", "", + /*Q0-Q7*/ "", "", "", "", "", "", "", "", + /*R0-R7*/ "", "", "", "", "", "", "", "", + /*S0-S7*/ "", "", "", "", "", "", "", "", + /*T0-T7*/ "", "", "", "", "", "", "", "", + /*U0-U7*/ "", "", "", "", "", "", "", "", + /*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "", + /*W0-W7*/ "", "", "", "", "", "", "", "", + /*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "", + /*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "", + /*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", ""; +}; + +&gpio1 { + /* 36 1.8V GPIOs */ + gpio-line-names = + /*A0-A7*/ "", "", "", "", "", "", "", "", + /*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","", + /*C0-C7*/ "", "", "", "", "", "", "", "", + /*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I", + /*E0-E7*/ "", "", "", "", "", "", "", ""; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts index 370738572a55..65b2208f5a90 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts @@ -52,12 +52,12 @@ hdd_fault { gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>; }; bmc_err { - lable = "BMC_fault"; + label = "BMC_fault"; gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; }; sys_err { - lable = "Sys_fault"; + label = "Sys_fault"; gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>; }; }; @@ -264,49 +264,49 @@ &gfx { }; &gpio { - pin_gpio_b0 { + pin-gpio-b0-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_HDD1_PWR_EN"; }; - pin_gpio_b5 { + pin-gpio-b5-hog { gpio-hog; gpios = ; input; line-name = "BMC_USB1_OCI2"; }; - pin_gpio_h5 { + pin-gpio-h5-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_CP0_PERST_ENABLE_R"; }; - pin_gpio_z2 { + pin-gpio-z2-hog { gpio-hog; gpios = ; output-high; line-name = "RST_PCA9546_U177_N"; }; - pin_gpio_aa6 { + pin-gpio-aa6-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_CP0_RESET_N"; }; - pin_gpio_aa7 { + pin-gpio-aa7-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_TPM_RESET_N"; }; - pin_gpio_ab0 { + pin-gpio-ab0-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts index b1d0ff85d397..1a7c61750d0d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts @@ -248,27 +248,27 @@ &gpio { /*AB0-AB7*/ "","","","","","","","", /*AC0-AC7*/ "","","","","","","",""; - func_mode0 { + func-mode0-hog { gpio-hog; gpios = ; output-low; }; - func_mode1 { + func-mode1-hog { gpio-hog; gpios = ; output-low; }; - func_mode2 { + func-mode2-hog { gpio-hog; gpios = ; output-low; }; - seq_cont { + seq-cont-hog { gpio-hog; gpios = ; output-low; }; - ncsi_cfg { + ncsi-cfg-hog { gpio-hog; input; gpios = ; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts index 45631b47a7b3..123da82c04d5 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts @@ -209,140 +209,140 @@ &lpc_ctrl { }; &gpio { - pin_func_mode0 { + pin-func-mode0-hog { gpio-hog; gpios = ; output-low; line-name = "func_mode0"; }; - pin_func_mode1 { + pin-func-mode1-hog { gpio-hog; gpios = ; output-low; line-name = "func_mode1"; }; - pin_func_mode2 { + pin-func-mode2-hog { gpio-hog; gpios = ; output-low; line-name = "func_mode2"; }; - pin_gpio_a0 { + pin-gpio-a0-hog { gpio-hog; gpios = ; input; line-name = "BMC_FAN_RESERVED_N"; }; - pin_gpio_a1 { + pin-gpio-a1-hog { gpio-hog; gpios = ; output-high; line-name = "APSS_WDT_N"; }; - pin_gpio_b1 { + pin-gpio-b1-hog { gpio-hog; gpios = ; output-high; line-name = "APSS_BOOT_MODE"; }; - pin_gpio_b2 { + pin-gpio-b2-hog { gpio-hog; gpios = ; output-high; line-name = "APSS_RESET_N"; }; - pin_gpio_b7 { + pin-gpio-b7-hog { gpio-hog; gpios = ; output-high; line-name = "SPIVID_STBY_RESET_N"; }; - pin_gpio_d1 { + pin-gpio-d1-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_POWER_UP"; }; - pin_gpio_f1 { + pin-gpio-f1-hog { gpio-hog; gpios = ; input; line-name = "BMC_BATTERY_TEST"; }; - pin_gpio_f4 { + pin-gpio-f4-hog { gpio-hog; gpios = ; input; line-name = "AST_HW_FAULT_N"; }; - pin_gpio_f5 { + pin-gpio-f5-hog { gpio-hog; gpios = ; input; line-name = "AST_SYS_FAULT_N"; }; - pin_gpio_f7 { + pin-gpio-f7-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_FULL_SPEED_N"; }; - pin_gpio_g3 { + pin-gpio-g3-hog { gpio-hog; gpios = ; output-high; line-name = "BMC_FAN_ERROR_N"; }; - pin_gpio_g4 { + pin-gpio-g4-hog { gpio-hog; gpios = ; input; line-name = "BMC_WDT_RST1_P"; }; - pin_gpio_g5 { + pin-gpio-g5-hog { gpio-hog; gpios = ; input; line-name = "BMC_WDT_RST2_P"; }; - pin_gpio_h0 { + pin-gpio-h0-hog { gpio-hog; gpios = ; input; line-name = "PE_SLOT_TEST_EN_N"; }; - pin_gpio_h1 { + pin-gpio-h1-hog { gpio-hog; gpios = ; input; line-name = "BMC_RTCRST_N"; }; - pin_gpio_h2 { + pin-gpio-h2-hog { gpio-hog; gpios = ; output-high; line-name = "SYS_PWROK_BMC"; }; - pin_gpio_h7 { + pin-gpio-h7-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts index 24df24ad9c80..e6b383f6e977 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts @@ -263,17 +263,17 @@ &gpio { /*AB0-AB7*/ "","","","","","","","", /*AC0-AC7*/ "","","","","","","",""; - nic_func_mode0 { + nic-func-mode0-hog { gpio-hog; gpios = ; output-low; }; - nic_func_mode1 { + nic-func-mode1-hog { gpio-hog; gpios = ; output-low; }; - seq_cont { + seq-cont-hog { gpio-hog; gpios = ; output-low; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts deleted file mode 100644 index a0e8c97e944a..000000000000 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-swift.dts +++ /dev/null @@ -1,974 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/dts-v1/; -#include "aspeed-g5.dtsi" -#include -#include - -/ { - model = "Swift BMC"; - compatible = "ibm,swift-bmc", "aspeed,ast2500"; - - chosen { - stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlycon"; - }; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - flash_memory: region@98000000 { - no-map; - reg = <0x98000000 0x04000000>; /* 64M */ - }; - - gfx_memory: framebuffer { - size = <0x01000000>; - alignment = <0x01000000>; - compatible = "shared-dma-pool"; - reusable; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - event-air-water { - label = "air-water"; - gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-checkstop { - label = "checkstop"; - gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-ps0-presence { - label = "ps0-presence"; - gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-ps1-presence { - label = "ps1-presence"; - gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-oppanel-presence { - label = "oppanel-presence"; - gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - event-opencapi-riser-presence { - label = "opencapi-riser-presence"; - gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - iio-hwmon-battery { - compatible = "iio-hwmon"; - io-channels = <&adc 12>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <1000>; - - event-scm0-presence { - label = "scm0-presence"; - gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; - linux,code = <6>; - }; - - event-scm1-presence { - label = "scm1-presence"; - gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; - linux,code = <7>; - }; - - event-cpu0vrm-presence { - label = "cpu0vrm-presence"; - gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; - linux,code = <12>; - }; - - event-cpu1vrm-presence { - label = "cpu1vrm-presence"; - gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; - linux,code = <13>; - }; - - event-fan0-presence { - label = "fan0-presence"; - gpios = <&pca0 5 GPIO_ACTIVE_LOW>; - linux,code = <5>; - }; - - event-fan1-presence { - label = "fan1-presence"; - gpios = <&pca0 6 GPIO_ACTIVE_LOW>; - linux,code = <6>; - }; - - event-fan2-presence { - label = "fan2-presence"; - gpios = <&pca0 7 GPIO_ACTIVE_LOW>; - linux,code = <7>; - }; - - event-fan3-presence { - label = "fan3-presence"; - gpios = <&pca0 8 GPIO_ACTIVE_LOW>; - linux,code = <8>; - }; - - event-fanboost-presence { - label = "fanboost-presence"; - gpios = <&pca0 9 GPIO_ACTIVE_LOW>; - linux,code = <9>; - }; - }; - - leds { - compatible = "gpio-leds"; - - fan0 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca0 0 GPIO_ACTIVE_LOW>; - }; - - fan1 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca0 1 GPIO_ACTIVE_LOW>; - }; - - fan2 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca0 2 GPIO_ACTIVE_LOW>; - }; - - fan3 { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca0 3 GPIO_ACTIVE_LOW>; - }; - - fanboost { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca0 4 GPIO_ACTIVE_LOW>; - }; - - front-fault { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca1 2 GPIO_ACTIVE_LOW>; - }; - - front-power { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca1 3 GPIO_ACTIVE_LOW>; - }; - - front-id { - retain-state-shutdown; - default-state = "keep"; - gpios = <&pca1 0 GPIO_ACTIVE_LOW>; - }; - - rear-fault { - gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; - }; - - rear-id { - gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; - }; - }; - - fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; - #address-cells = <2>; - #size-cells = <0>; - no-gpio-delays; - - clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>; - data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; - enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; - trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; - }; - - iio-hwmon-dps310 { - compatible = "iio-hwmon"; - io-channels = <&dps 0>; - }; - -}; - -&fmc { - status = "okay"; - - flash@0 { - status = "okay"; - label = "bmc"; - m25p,fast-read; - spi-max-frequency = <100000000>; - partitions { - #address-cells = < 1 >; - #size-cells = < 1 >; - compatible = "fixed-partitions"; - u-boot@0 { - reg = < 0 0x60000 >; - label = "u-boot"; - }; - u-boot-env@60000 { - reg = < 0x60000 0x20000 >; - label = "u-boot-env"; - }; - obmc-ubi@80000 { - reg = < 0x80000 0x7F80000>; - label = "obmc-ubi"; - }; - }; - }; - - flash@1 { - status = "okay"; - label = "alt-bmc"; - m25p,fast-read; - spi-max-frequency = <100000000>; - partitions { - #address-cells = < 1 >; - #size-cells = < 1 >; - compatible = "fixed-partitions"; - u-boot@0 { - reg = < 0 0x60000 >; - label = "alt-u-boot"; - }; - u-boot-env@60000 { - reg = < 0x60000 0x20000 >; - label = "alt-u-boot-env"; - }; - obmc-ubi@80000 { - reg = < 0x80000 0x7F80000>; - label = "alt-obmc-ubi"; - }; - }; - }; -}; - -&spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_default>; - - flash@0 { - status = "okay"; - label = "pnor"; - m25p,fast-read; - spi-max-frequency = <100000000>; - }; -}; - -&uart1 { - /* Rear RS-232 connector */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd1_default - &pinctrl_rxd1_default - &pinctrl_nrts1_default - &pinctrl_ndtr1_default - &pinctrl_ndsr1_default - &pinctrl_ncts1_default - &pinctrl_ndcd1_default - &pinctrl_nri1_default>; -}; - -&uart2 { - /* APSS */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; -}; - -&uart5 { - status = "okay"; -}; - -&lpc_ctrl { - status = "okay"; - memory-region = <&flash_memory>; - flash = <&spi1>; -}; - -&mac0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii1_default>; - use-ncsi; - clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, - <&syscon ASPEED_CLK_MAC1RCLK>; - clock-names = "MACCLK", "RCLK"; -}; - -&i2c2 { - status = "okay"; - - /* MUX -> - * Samtec 1 - * Samtec 2 - */ -}; - -&i2c3 { - status = "okay"; - - max31785@52 { - compatible = "maxim,max31785a"; - reg = <0x52>; - #address-cells = <1>; - #size-cells = <0>; - - fan@0 { - compatible = "pmbus-fan"; - reg = <0>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; - }; - - fan@1 { - compatible = "pmbus-fan"; - reg = <1>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; - }; - - fan@2 { - compatible = "pmbus-fan"; - reg = <2>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; - }; - - fan@3 { - compatible = "pmbus-fan"; - reg = <3>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; - }; - - fan@4 { - compatible = "pmbus-fan"; - reg = <4>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; - }; - }; - - pca0: pca9552@60 { - compatible = "nxp,pca9552"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - gpio-controller; - #gpio-cells = <2>; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; - - gpio@8 { - reg = <8>; - type = ; - }; - - gpio@9 { - reg = <9>; - type = ; - }; - - gpio@10 { - reg = <10>; - type = ; - }; - - gpio@11 { - reg = <11>; - type = ; - }; - - gpio@12 { - reg = <12>; - type = ; - }; - - gpio@13 { - reg = <13>; - type = ; - }; - - gpio@14 { - reg = <14>; - type = ; - }; - - gpio@15 { - reg = <15>; - type = ; - }; - }; - - power-supply@68 { - compatible = "ibm,cffps2"; - reg = <0x68>; - }; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - power-supply@69 { - compatible = "ibm,cffps2"; - reg = <0x69>; - }; - - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - }; -}; - -&i2c7 { - status = "okay"; - - dps: dps310@76 { - compatible = "infineon,dps310"; - reg = <0x76>; - #io-channel-cells = <0>; - }; - - tmp275@48 { - compatible = "ti,tmp275"; - reg = <0x48>; - }; - - si7021a20@20 { - compatible = "si,si7021a20"; - reg = <0x20>; - }; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - pca1: pca9551@60 { - compatible = "nxp,pca9551"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - gpio-controller; - #gpio-cells = <2>; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; - }; -}; - -&i2c8 { - status = "okay"; - - pca9552: pca9552@60 { - compatible = "nxp,pca9552"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", - "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", - "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", - "P9_SCM0_PRES", "P9_SCM1_PRES", - "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", - "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", - "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", - "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; - - gpio@0 { - reg = <0>; - type = ; - }; - - gpio@1 { - reg = <1>; - type = ; - }; - - gpio@2 { - reg = <2>; - type = ; - }; - - gpio@3 { - reg = <3>; - type = ; - }; - - gpio@4 { - reg = <4>; - type = ; - }; - - gpio@5 { - reg = <5>; - type = ; - }; - - gpio@6 { - reg = <6>; - type = ; - }; - - gpio@7 { - reg = <7>; - type = ; - }; - - gpio@8 { - reg = <8>; - type = ; - }; - - gpio@9 { - reg = <9>; - type = ; - }; - - gpio@10 { - reg = <10>; - type = ; - }; - - gpio@11 { - reg = <11>; - type = ; - }; - - gpio@12 { - reg = <12>; - type = ; - }; - - gpio@13 { - reg = <13>; - type = ; - }; - - gpio@14 { - reg = <14>; - type = ; - }; - - gpio@15 { - reg = <15>; - type = ; - }; - }; - - rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; - - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - }; - - ucd90160@64 { - compatible = "ti,ucd90160"; - reg = <0x64>; - }; -}; - -&i2c9 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - tmp423a@4c { - compatible = "ti,tmp423"; - reg = <0x4c>; - }; - - ir35221@71 { - compatible = "infineon,ir35221"; - reg = <0x71>; - }; - - ir35221@72 { - compatible = "infineon,ir35221"; - reg = <0x72>; - }; - - pca2: pca9539@74 { - compatible = "nxp,pca9539"; - reg = <0x74>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio@0 { - reg = <0>; - }; - - gpio@1 { - reg = <1>; - }; - - gpio@2 { - reg = <2>; - }; - - gpio@3 { - reg = <3>; - }; - - gpio@4 { - reg = <4>; - }; - - gpio@5 { - reg = <5>; - }; - - gpio@6 { - reg = <6>; - }; - - gpio@7 { - reg = <7>; - }; - - gpio@8 { - reg = <8>; - }; - - gpio@9 { - reg = <9>; - }; - - gpio@10 { - reg = <10>; - }; - - gpio@11 { - reg = <11>; - }; - - gpio@12 { - reg = <12>; - }; - - gpio@13 { - reg = <13>; - }; - - gpio@14 { - reg = <14>; - }; - - gpio@15 { - reg = <15>; - }; - }; -}; - -&i2c10 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - tmp423a@4c { - compatible = "ti,tmp423"; - reg = <0x4c>; - }; - - ir35221@71 { - compatible = "infineon,ir35221"; - reg = <0x71>; - }; - - ir35221@72 { - compatible = "infineon,ir35221"; - reg = <0x72>; - }; - - pca3: pca9539@74 { - compatible = "nxp,pca9539"; - reg = <0x74>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio@0 { - reg = <0>; - }; - - gpio@1 { - reg = <1>; - }; - - gpio@2 { - reg = <2>; - }; - - gpio@3 { - reg = <3>; - }; - - gpio@4 { - reg = <4>; - }; - - gpio@5 { - reg = <5>; - }; - - gpio@6 { - reg = <6>; - }; - - gpio@7 { - reg = <7>; - }; - - gpio@8 { - reg = <8>; - }; - - gpio@9 { - reg = <9>; - }; - - gpio@10 { - reg = <10>; - }; - - gpio@11 { - reg = <11>; - }; - - gpio@12 { - reg = <12>; - }; - - gpio@13 { - reg = <13>; - }; - - gpio@14 { - reg = <14>; - }; - - gpio@15 { - reg = <15>; - }; - }; -}; - -&i2c11 { - /* MUX - * -> PCIe Slot 0 - * -> PCIe Slot 1 - * -> PCIe Slot 2 - * -> PCIe Slot 3 - */ - status = "okay"; -}; - -&i2c12 { - status = "okay"; - - tmp275@48 { - compatible = "ti,tmp275"; - reg = <0x48>; - }; - - tmp275@4a { - compatible = "ti,tmp275"; - reg = <0x4a>; - }; -}; - -&i2c13 { - status = "okay"; -}; - -&vuart { - status = "okay"; -}; - -&gfx { - status = "okay"; - memory-region = <&gfx_memory>; -}; - -&wdt1 { - aspeed,reset-type = "none"; - aspeed,external-signal; - aspeed,ext-push-pull; - aspeed,ext-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdtrst1_default>; -}; - -&wdt2 { - aspeed,alt-boot; -}; - -&ibt { - status = "okay"; -}; - -&adc { - status = "okay"; -}; - -&sdmmc { - status = "okay"; -}; - -&sdhci1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sd2_default>; -}; - -#include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts index 9904f0a58cfa..6ac7b0aa6e54 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts @@ -509,25 +509,25 @@ &gpio { /*AB0-AB7*/ "","","","","","","","", /*AC0-AC7*/ "","","","","","","",""; - line_iso_u146_en { + line-iso-u146-en-hog { gpio-hog; gpios = ; output-high; }; - ncsi_mux_en_n { + ncsi-mux-en-n-hog { gpio-hog; gpios = ; output-low; }; - line_bmc_i2c2_sw_rst_n { + line-bmc-i2c2-sw-rst-n-hog { gpio-hog; gpios = ; output-high; }; - line_bmc_i2c5_sw_rst_n { + line-bmc-i2c5-sw-rst-n-hog { gpio-hog; gpios = ; output-high; diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi index e74ba6bf370d..4ec568586b14 100644 --- a/arch/arm/boot/dts/broadcom/bcm63138.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi @@ -184,13 +184,69 @@ ubus@fffe8000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0xfffe8000 0x8100>; + ranges = <0 0xfffe8000 0x10000>; timer: timer@80 { compatible = "brcm,bcm6328-timer", "syscon"; reg = <0x80 0x3c>; }; + /* GPIOs 0 .. 31 */ + gpio0: gpio@100 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x100 0x04>, <0x114 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@104 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x104 0x04>, <0x118 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@108 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x108 0x04>, <0x11c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@10c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x10c 0x04>, <0x120 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@110 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x110 0x04>, <0x124 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rng@300 { + compatible = "brcm,iproc-rng200"; + reg = <0x300 0x28>; + interrupts = ; + }; + serial0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x1b>; @@ -209,6 +265,14 @@ serial1: serial@620 { status = "disabled"; }; + leds: led-controller@700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x700 0xdc>; + status = "disabled"; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -248,6 +312,19 @@ bootlut: bootlut@8000 { reg = <0x8000 0x50>; }; + pl081_dma: dma-controller@d000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0xd000 0x1000>; + interrupts = ; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; + reboot { compatible = "syscon-reboot"; regmap = <&timer>; diff --git a/arch/arm/boot/dts/broadcom/bcm63148.dtsi b/arch/arm/boot/dts/broadcom/bcm63148.dtsi index 53703827ee3f..e071cddb28fc 100644 --- a/arch/arm/boot/dts/broadcom/bcm63148.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm63148.dtsi @@ -99,6 +99,62 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xfffe8000 0x8000>; + /* GPIOs 0 .. 31 */ + gpio0: gpio@100 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x100 0x04>, <0x114 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@104 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x104 0x04>, <0x118 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@108 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x108 0x04>, <0x11c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@10c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x10c 0x04>, <0x120 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@110 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x110 0x04>, <0x124 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rng@300 { + compatible = "brcm,iproc-rng200"; + reg = <0x300 0x28>; + interrupts = ; + }; + uart0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x20>; @@ -108,6 +164,14 @@ uart0: serial@600 { status = "disabled"; }; + leds: led-controller@700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x700 0xdc>; + status = "disabled"; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/broadcom/bcm63178.dtsi b/arch/arm/boot/dts/broadcom/bcm63178.dtsi index 6d8d33498983..430750b3030f 100644 --- a/arch/arm/boot/dts/broadcom/bcm63178.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm63178.dtsi @@ -117,6 +117,97 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x10>; + }; + + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = ; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -143,6 +234,27 @@ nandcs: nand@0 { }; }; + leds: led-controller@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x3000 0xdc>; + status = "disabled"; + }; + + pl081_dma: dma-controller@11000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x11000 0x1000>; + interrupts = ; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi index e0e06af3fe89..f5591a45d2e4 100644 --- a/arch/arm/boot/dts/broadcom/bcm6846.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi @@ -196,6 +196,7 @@ uart0: serial@640 { rng@b80 { compatible = "brcm,iproc-rng200"; reg = <0xb80 0x28>; + interrupts = ; }; leds: led-controller@800 { diff --git a/arch/arm/boot/dts/broadcom/bcm6855.dtsi b/arch/arm/boot/dts/broadcom/bcm6855.dtsi index 52915ec6f339..a88c3f0fbcb0 100644 --- a/arch/arm/boot/dts/broadcom/bcm6855.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm6855.dtsi @@ -116,6 +116,103 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x10>; + }; + + watchdog@4c0 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x4c0 0x10>; + status = "disabled"; + }; + + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = ; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -143,6 +240,27 @@ nandcs: nand@0 { }; }; + leds: led-controller@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x3000 0xdc>; + status = "disabled"; + }; + + pl081_dma: dma-controller@11000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x11000 0x1000>; + interrupts = ; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; @@ -151,5 +269,14 @@ uart0: serial@12000 { clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; + + uart1: serial@13000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x13000 0x1000>; + interrupts = ; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm6878.dtsi b/arch/arm/boot/dts/broadcom/bcm6878.dtsi index 70cf23a65fdb..dd837bf69390 100644 --- a/arch/arm/boot/dts/broadcom/bcm6878.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm6878.dtsi @@ -108,6 +108,111 @@ bus@ff800000 { #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x10>; + }; + + watchdog@4c0 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x4c0 0x10>; + status = "disabled"; + }; + + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = ; + }; + + leds: led-controller@700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x700 0xdc>; + status = "disabled"; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -134,10 +239,23 @@ nandcs: nand@0 { }; }; + pl081_dma: dma-controller@11000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x11000 0x1000>; + interrupts = ; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; - interrupts = ; + interrupts = ; clocks = <&uart_clk>, <&uart_clk>; clock-names = "uartclk", "apb_pclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi index 71a8b77b46f4..7e71aecb7251 100644 --- a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi @@ -17,21 +17,21 @@ pwm-leds { led-1 { function = LED_FUNCTION_INDICATOR; color = ; - pwms = <&pwm 1 50000>; + pwms = <&pwm 1 50000 0>; max-brightness = <255>; }; led-2 { function = LED_FUNCTION_POWER; color = ; - pwms = <&pwm 2 50000>; + pwms = <&pwm 2 50000 0>; max-brightness = <255>; }; led-3 { function = LED_FUNCTION_INDICATOR; color = ; - pwms = <&pwm 3 50000>; + pwms = <&pwm 3 50000 0>; max-brightness = <255>; }; }; @@ -132,7 +132,6 @@ pwm_leds: pwm_leds { &pwm { status = "okay"; - #pwm-cells = <2>; }; &uart0 { diff --git a/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi index 52baffe45f12..259cb3d5f16d 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi @@ -27,8 +27,8 @@ serial@12000 { i2c { compatible = "i2c-gpio"; - gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ - &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ + sda-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ }; }; diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile index 1957947cb41c..e48de3efeb3b 100644 --- a/arch/arm/boot/dts/mediatek/Makefile +++ b/arch/arm/boot/dts/mediatek/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt2701-evb.dtb \ + mt6572-jty-d101.dtb \ + mt6572-lenovo-a369i.dtb \ mt6580-evbp1.dtb \ mt6582-prestigio-pmt5008-3g.dtb \ mt6589-aquaris5.dtb \ diff --git a/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts new file mode 100644 index 000000000000..18c3cab6b7a3 --- /dev/null +++ b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2025 Max Shevchenko + */ + +/dts-v1/; +#include "mt6572.dtsi" + +/ { + model = "JTY D101"; + compatible = "jty,d101", "mediatek,mt6572"; + + aliases { + serial0 = &uart0; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + stdout-path = "serial0:921600n8"; + + framebuffer: framebuffer@bf400000 { + compatible = "simple-framebuffer"; + memory-region = <&framebuffer_reserved>; + width = <1024>; + height = <600>; + stride = <(1024 * 2)>; + format = "r5g6b5"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + connsys@80000000 { + reg = <0x80000000 0x100000>; + no-map; + }; + + modem@be000000 { + reg = <0xbe000000 0x1400000>; + no-map; + }; + + framebuffer_reserved: framebuffer@bf400000 { + reg = <0xbf400000 0xc00000>; + no-map; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts new file mode 100644 index 000000000000..c2f0c60ea777 --- /dev/null +++ b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2025 Max Shevchenko + */ + +/dts-v1/; +#include "mt6572.dtsi" + +/ { + model = "Lenovo A369i"; + compatible = "lenovo,a369i", "mediatek,mt6572"; + + aliases { + serial0 = &uart0; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + stdout-path = "serial0:921600n8"; + + framebuffer: framebuffer@9fa00000 { + compatible = "simple-framebuffer"; + memory-region = <&framebuffer_reserved>; + width = <480>; + height = <800>; + stride = <(480 * 2)>; + format = "r5g6b5"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + connsys@80000000 { + reg = <0x80000000 0x100000>; + no-map; + }; + + framebuffer_reserved: framebuffer@9fa00000 { + reg = <0x9fa00000 0x600000>; + no-map; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mediatek/mt6572.dtsi b/arch/arm/boot/dts/mediatek/mt6572.dtsi new file mode 100644 index 000000000000..ac70f266d698 --- /dev/null +++ b/arch/arm/boot/dts/mediatek/mt6572.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2025 Max Shevchenko + */ + +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&sysirq>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "mediatek,mt6589-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt6572-wdt", "mediatek,mt6589-wdt"; + reg = <0x10007000 0x100>; + interrupts = ; + timeout-sec = <15>; + #reset-cells = <1>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt6572-timer", "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = ; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt6572-sysirq", "mediatek,mt6577-sysirq"; + reg = <0x10200100 0x1c>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + reg = <0x10211000 0x1000>, + <0x10212000 0x2000>, + <0x10214000 0x2000>, + <0x10216000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + + uart0: serial@11005000 { + compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart"; + reg = <0x11005000 0x400>; + interrupts = ; + clocks = <&uart_clk>; + clock-names = "baud"; + status = "disabled"; + }; + + uart1: serial@11006000 { + compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart"; + reg = <0x11006000 0x400>; + interrupts = ; + clocks = <&uart_clk>; + clock-names = "baud"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts index cdc56b53299d..c1ff3248bd8f 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts @@ -609,7 +609,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; - spi-cs-setup-ns = <7>; + spi-cs-setup-delay-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi index 8ac85dac5a96..13c28e92b17e 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi @@ -44,7 +44,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; - spi-cs-setup-ns = <7>; + spi-cs-setup-delay-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi index ef11606a82b3..0417f53b3e96 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi @@ -234,7 +234,7 @@ qspi1_flash: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; - spi-cs-setup-ns = <7>; + spi-cs-setup-delay-ns = <7>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; m25p,fast-read; @@ -385,7 +385,7 @@ &sdmmc1 { wilc: wifi@0 { reg = <0>; - compatible = "microchip,wilc1000"; + compatible = "microchip,wilc3000", "microchip,wilc1000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wilc_default>; clocks = <&pmc PMC_TYPE_SYSTEM 9>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts index 9fa6f1395aa6..fbae6a9af6c3 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts @@ -714,7 +714,7 @@ flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; - spi-cs-setup-ns = <7>; + spi-cs-setup-delay-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts index 53a657cf4efb..7eaf6ca233ec 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts @@ -38,7 +38,24 @@ reg_5v: regulator-5v { regulator-max-microvolt = <5000000>; regulator-always-on; }; +}; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2_default>; + status = "okay"; +}; + +&can3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can3_default>; + status = "okay"; }; &dma0 { @@ -278,6 +295,24 @@ &main_xtal { }; &pioa { + pinctrl_can1_default: can1-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can2_default: can2-default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can3_default: can3-default { + pinmux = , + ; + bias-disable; + }; + pinctrl_gmac0_default: gmac0-default { pinmux = , , diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts index 2543599013b1..3924f62ff0fb 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts @@ -35,16 +35,6 @@ aliases { i2c2 = &i2c9; }; - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <24000000>; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -556,6 +546,10 @@ &i2s0 { pinctrl-0 = <&pinctrl_i2s0_default>; }; +&main_xtal { + clock-frequency = <24000000>; +}; + &pdmc0 { #sound-dai-cells = <0>; microchip,mic-pos = , /* MIC 1 */ @@ -885,6 +879,10 @@ input@0 { }; }; +&slow_xtal { + clock-frequency = <32768>; +}; + &spdifrx { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdifrx_default>; diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi index 2a4c83d88733..e105ad855ce8 100644 --- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi +++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi @@ -714,9 +714,8 @@ usb0: usb@300000 { i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ - &pioA 26 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 25 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 26 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi index ec973f07a961..fc0b6a73204f 100644 --- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi @@ -781,9 +781,8 @@ nand_controller: nand-controller { i2c_gpio0: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ - &pioA 24 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi index 0b556c234557..d1d678b77e84 100644 --- a/arch/arm/boot/dts/microchip/at91sam9261.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi @@ -655,8 +655,8 @@ i2c-gpio-0 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_bitbang>; - gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */ - <&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */ + sda-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 8 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi index 3e9e5ce7c6c8..a4b5d1f228f9 100644 --- a/arch/arm/boot/dts/microchip/at91sam9263.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi @@ -826,9 +826,8 @@ nand_controller1: nand-controller { i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ - &pioB 5 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts index e0c1e8df81b1..947c011c1b00 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts +++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts @@ -46,7 +46,7 @@ led-power-blue { led-power-green { label = "smartgw:power:green"; gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; - default-state = "on"; + linux,default-trigger = "timer"; }; led-power-red { diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi index 535e26e05e99..4e00ed2d3ecd 100644 --- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi @@ -1010,9 +1010,8 @@ nand_controller: nand-controller { i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ - &pioA 21 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 21 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <5>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi index 2f930c39ce4d..af41c3dbb4bf 100644 --- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi @@ -786,9 +786,8 @@ nand_controller: nand-controller { i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ - &pioA 31 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi index 1fec9fcc7cd1..de74cf2980a0 100644 --- a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi @@ -833,8 +833,8 @@ rtc@fffffe00 { i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */ - <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */ + sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ @@ -847,8 +847,8 @@ i2c-gpio-0 { i2c-gpio-1 { compatible = "i2c-gpio"; - gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */ - <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */ + sda-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi index 17bdf1e4db01..9070fd06995a 100644 --- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi @@ -933,9 +933,8 @@ nand_controller: nand-controller { i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ - &pioA 31 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ @@ -948,9 +947,8 @@ &pioA 31 GPIO_ACTIVE_HIGH /* scl */ i2c-gpio-1 { compatible = "i2c-gpio"; - gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ - &pioC 1 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioC 1 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ @@ -963,9 +961,8 @@ &pioC 1 GPIO_ACTIVE_HIGH /* scl */ i2c-gpio-2 { compatible = "i2c-gpio"; - gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ - &pioB 5 GPIO_ACTIVE_HIGH /* scl */ - >; + sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <2>; /* ~100 kHz */ diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi index b217a908f525..66c07e642c3e 100644 --- a/arch/arm/boot/dts/microchip/sam9x7.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi @@ -45,11 +45,13 @@ cpu@0 { clocks { slow_xtal: clock-slowxtal { compatible = "fixed-clock"; + clock-output-names = "slow_xtal"; #clock-cells = <0>; }; main_xtal: clock-mainxtal { compatible = "fixed-clock"; + clock-output-names = "main_xtal"; #clock-cells = <0>; }; }; @@ -983,6 +985,32 @@ pwm0: pwm@f8034000 { status = "disabled"; }; + hlcdc: hlcdc@f8038000 { + compatible = "microchip,sam9x75-xlcdc"; + reg = <0xf8038000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>; + clock-names = "periph_clk", "sys_clk", "slow_clk"; + status = "disabled"; + + display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + pwm { + compatible = "atmel,hlcdc-pwm"; + #pwm-cells = <3>; + }; + }; + flx9: flexcom@f8040000 { compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"; reg = <0xf8040000 0x200>; @@ -1087,6 +1115,15 @@ AT91_XDMAC_DT_PER_IF(1) | }; }; + lvds_controller: lvds-controller@f8060000 { + compatible = "microchip,sam9x75-lvds"; + reg = <0xf8060000 0x100>; + interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "pclk"; + status = "disabled"; + }; + matrix: matrix@ffffde00 { compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon"; reg = <0xffffde00 0x200>; diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi index dc22fb679333..17430d7f2055 100644 --- a/arch/arm/boot/dts/microchip/sama5d2.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi @@ -32,6 +32,8 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a5"; reg = <0>; + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB next-level-cache = <&L2>; }; }; @@ -160,6 +162,7 @@ L2: cache-controller@a00000 { interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>; cache-unified; cache-level = <2>; + cache-size = <0x20000>; // L2, 128 KB }; ebi: ebi@10000000 { diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi index e95799c17fdb..00ba59ac1968 100644 --- a/arch/arm/boot/dts/microchip/sama5d3.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi @@ -48,6 +48,8 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a5"; reg = <0x0>; + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB }; }; diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi index 59a7d557c7cb..ec1d68c640de 100644 --- a/arch/arm/boot/dts/microchip/sama5d4.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi @@ -50,6 +50,8 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a5"; reg = <0>; + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB next-level-cache = <&L2>; }; }; @@ -143,6 +145,7 @@ L2: cache-controller@a00000 { interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>; cache-unified; cache-level = <2>; + cache-size = <0x20000>; // L2, 128 KB }; ebi: ebi@10000000 { diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index d08d773b1cc5..c191acc2c89f 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -32,17 +32,29 @@ cpu0: cpu@0 { device_type = "cpu"; clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>; clock-names = "cpu"; + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB + next-level-cache = <&L2>; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; // L2, 256 KB + cache-unified; + }; }; }; clocks { main_xtal: clock-mainxtal { compatible = "fixed-clock"; + clock-output-names = "main_xtal"; #clock-cells = <0>; }; slow_xtal: clock-slowxtal { compatible = "fixed-clock"; + clock-output-names = "slow_xtal"; #clock-cells = <0>; }; }; @@ -163,6 +175,86 @@ chipid@e0020000 { reg = <0xe0020000 0x8>; }; + can0: can@e0828000 { + compatible = "bosch,m_can"; + reg = <0xe0828000 0x200>, <0x100000 0x7800>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 58>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can1: can@e082c000 { + compatible = "bosch,m_can"; + reg = <0xe082c000 0x200>, <0x100000 0xbc00>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 59>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can2: can@e0830000 { + compatible = "bosch,m_can"; + reg = <0xe0830000 0x200>, <0x100000 0x10000>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 60>, <&pmc PMC_TYPE_GCK 60>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 60>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can3: can@e0834000 { + compatible = "bosch,m_can"; + reg = <0xe0834000 0x200>, <0x110000 0x4400>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 61>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can4: can@e0838000 { + compatible = "bosch,m_can"; + reg = <0xe0838000 0x200>, <0x110000 0x8800>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 62>; + assigned-clock-rates = <40000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; + bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + dma2: dma-controller@e1200000 { compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; reg = <0xe1200000 0x1000>; @@ -186,6 +278,45 @@ sdmmc1: mmc@e1208000 { status = "disabled"; }; + aes: crypto@e1600000 { + compatible = "microchip,sama7d65-aes", "atmel,at91sam9g46-aes"; + reg = <0xe1600000 0x100>; + interrupts = ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; + clock-names = "aes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + }; + + sha: crypto@e1604000 { + compatible = "microchip,sama7d65-sha", "atmel,at91sam9g46-sha"; + reg = <0xe1604000 0x100>; + interrupts = ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 78>; + clock-names = "sha_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; + dma-names = "tx"; + }; + + tdes: crypto@e1608000 { + compatible = "microchip,sama7d65-tdes", "atmel,at91sam9g46-tdes"; + reg = <0xe1608000 0x100>; + interrupts = ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 91>; + clock-names = "tdes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, + <&dma0 AT91_XDMAC_DT_PERID(53)>; + dma-names = "tx", "rx"; + }; + + trng: rng@e160c000 { + compatible = "microchip,sama7d65-trng", "microchip,sam9x60-trng"; + reg = <0xe160c000 0x100>; + interrupts = ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 92>; + }; + dma0: dma-controller@e1610000 { compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma"; reg = <0xe1610000 0x1000>; @@ -254,6 +385,15 @@ pit64b1: timer@e1804000 { clock-names = "pclk", "gclk"; }; + pwm: pwm@e1818000 { + compatible = "microchip,sama7d65-pwm", "atmel,sama5d2-pwm"; + reg = <0xe1818000 0x500>; + interrupts = ; + clocks = <&pmc PMC_TYPE_PERIPHERAL 72>; + #pwm-cells = <3>; + status = "disabled"; + }; + flx0: flexcom@e1820000 { compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom"; reg = <0xe1820000 0x200>; diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi index 17bcdcf0cf4a..381cbcfcb34a 100644 --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi @@ -38,6 +38,16 @@ cpu0: cpu@0 { clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ + d-cache-size = <0x8000>; // L1, 32 KB + i-cache-size = <0x8000>; // L1, 32 KB + next-level-cache = <&L2>; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; // L2, 256 KB + cache-unified; + }; }; }; @@ -117,19 +127,22 @@ map1 { }; clocks { - slow_xtal: slow_xtal { + slow_xtal: clock-slowxtal { compatible = "fixed-clock"; + clock-output-names = "slow_xtal"; #clock-cells = <0>; }; - main_xtal: main_xtal { + main_xtal: clock-mainxtal { compatible = "fixed-clock"; + clock-output-names = "main_xtal"; #clock-cells = <0>; }; - usb_clk: usb_clk { + usb_clk: clock-usbclk { compatible = "fixed-clock"; #clock-cells = <0>; + clock-output-names = "usb_clk"; clock-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile index ff2c5bfd8efa..7c1d3cb5dcf0 100644 --- a/arch/arm/boot/dts/nvidia/Makefile +++ b/arch/arm/boot/dts/nvidia/Makefile @@ -31,10 +31,12 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-grouper-PM269.dtb \ tegra30-asus-nexus7-grouper-E1565.dtb \ tegra30-asus-nexus7-tilapia-E1565.dtb \ + tegra30-asus-p1801-t.dtb \ tegra30-asus-tf201.dtb \ tegra30-asus-tf300t.dtb \ tegra30-asus-tf300tg.dtb \ tegra30-asus-tf300tl.dtb \ + tegra30-asus-tf600t.dtb \ tegra30-asus-tf700t.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts new file mode 100644 index 000000000000..9241cc269a89 --- /dev/null +++ b/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts @@ -0,0 +1,2087 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include +#include + +#include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" + +/ { + model = "Asus Portable AiO P1801-T"; + compatible = "asus,p1801-t", "nvidia,tegra30"; + chassis-type = "convertible"; + + aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc1; /* uSD slot */ + mmc2 = &sdmmc3; /* WiFi */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + display0 = &hdmi; + + serial1 = &uartc; /* Bluetooth */ + serial2 = &uartb; /* GPS */ + }; + + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + memory@80000000 { + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma@80000000 { + compatible = "shared-dma-pool"; + alloc-ranges = <0x80000000 0x30000000>; + size = <0x10000000>; /* 256MiB */ + linux,cma-default; + reusable; + }; + + framebuffer@abe01000 { + reg = <0xabe01000 (1920 * 1080 * 4)>; + no-map; + }; + + trustzone@bfe00000 { + reg = <0xbfe00000 0x200000>; /* 2MB */ + no-map; + }; + + ramoops@fea00000 { + compatible = "ramoops"; + reg = <0xfea00000 0x10000>; /* 64kB */ + console-size = <0x8000>; /* 32kB */ + record-size = <0x400>; /* 1kB */ + ecc-size = <16>; + }; + }; + + host1x@50000000 { + hdmi: hdmi@54280000 { + status = "okay"; + + hdmi-supply = <&hdmi_5v0_sys>; + pll-supply = <&vdd_1v8_vio>; + vdd-supply = <&vdd_3v3_sys>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; + }; + + gpio@6000d000 { + init-lpm-in-hog { + gpio-hog; + gpios = ; + input; + }; + + init-lpm-out-hog { + gpio-hog; + gpios = , + ; + output-low; + }; + + tp-vendor-hog { + gpio-hog; + gpios = ; + input; + }; + }; + + vde@6001a000 { + assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>; + assigned-clock-rates = <408000000>; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* SDMMC1 pinmux */ + sdmmc1-clk { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1-cmd { + nvidia,pins = "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7", + "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1-cd { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1-wp { + nvidia,pins = "vi_d11_pt3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC2 pinmux */ + vi-d1-pd5 { + nvidia,pins = "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d5_pl3", + "vi_d7_pl5"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi-d8-pl6 { + nvidia,pins = "vi_d8_pl6", + "vi_d9_pl7"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + nvidia,io-reset = <0>; + }; + + /* SDMMC3 pinmux */ + sdmmc3-clk { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3-cmd { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC4 pinmux */ + sdmmc4-clk { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4-cmd { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4-rst-n { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam-mclk { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + drive-sdmmc4 { + nvidia,pins = "drive_gma", + "drive_gmb", + "drive_gmc", + "drive_gmd"; + nvidia,pull-down-strength = <9>; + nvidia,pull-up-strength = <9>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + + /* I2C pinmux */ + gen1-i2c { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + gen2-i2c { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + cam-i2c { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + ddc-i2c { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + }; + pwr-i2c { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + hotplug-i2c { + nvidia,pins = "pu4"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* HDMI pinmux */ + hdmi-cec { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = <0>; + }; + hdmi-hpd { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-A */ + ulpi-data0-po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-data1-po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-data5-po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-data7-po0 { + nvidia,pins = "ulpi_data7_po0", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data6_po7"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-B */ + uartb-txd-rts { + nvidia,pins = "uart2_txd_pc2", + "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uartb-rxd-cts { + nvidia,pins = "uart2_rxd_pc3", + "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-C */ + uartc-rxd-cts { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uartc-txd-rts { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-D */ + ulpi-nxt-py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-clk-py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* I2S pinmux */ + dap-i2s0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap-i2s1 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3-fs { + nvidia,pins = "dap3_fs_pp0", + "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3-dout { + nvidia,pins = "dap3_dout_pp2", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap-i2s3 { + nvidia,pins = "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* sensors pinmux */ + nct-irq { + nvidia,pins = "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Asus EC pinmux */ + ec-irqs { + nvidia,pins = "kb_row10_ps2", + "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ec-reqs { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* memory type bootstrap */ + mem-boostraps { + nvidia,pins = "gmi_ad4_pg4", + "gmi_ad5_pg5"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PCI-e pinmux */ + pex-l2-rst-n { + nvidia,pins = "pex_l2_rst_n_pcc6", + "pex_l0_rst_n_pdd1", + "pex_l1_rst_n_pdd5"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex-l2-clkreq-n { + nvidia,pins = "pex_l2_clkreq_n_pcc7", + "pex_l0_prsnt_n_pdd0", + "pex_l0_clkreq_n_pdd2", + "pex_wake_n_pdd3", + "pex_l1_prsnt_n_pdd4", + "pex_l1_clkreq_n_pdd6", + "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SPI pinmux */ + spi1-mosi-px4 { + nvidia,pins = "spi1_mosi_px4", + "spi1_sck_px5", + "spi1_cs0_n_px6", + "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2-cs1-n-pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2-sck-px2 { + nvidia,pins = "spi2_sck_px2"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-a17-pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a16_pj7"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-a18-pb1 { + nvidia,pins = "gmi_a18_pb1"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-a19-pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Display A pinmux */ + lcd-pwr0-pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pclk_pb3", + "lcd_pwr1_pc1", + "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_vsync_pj4", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_dc0_pn6", + "lcd_sdin_pz2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd-cs0-n-pn4 { + nvidia,pins = "lcd_cs0_n_pn4", + "lcd_sdout_pn5", + "lcd_wr_n_pz3"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + blink { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* KBC keys */ + kb-col0-pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb-col1-pq1 { + nvidia,pins = "kb_row1_pr1", + "kb_row3_pr3", + "kb_row14_ps6"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb-col4-pq4 { + nvidia,pins = "kb_col4_pq4", + "kb_col5_pq5", + "kb_col7_pq7", + "kb_row2_pr2", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_row12_ps4", + "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + gmi-wp-n-pc7 { + nvidia,pins = "gmi_wp_n_pc7", + "gmi_wait_pi7", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-cs0-n-pj0 { + nvidia,pins = "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs2_n_pk3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi-pclk-pt0 { + nvidia,pins = "vi_pclk_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + nvidia,io-reset = <0>; + }; + + /* GPIO keys pinmux */ + power-key { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vol-keys { + nvidia,pins = "kb_col2_pq2", + "kb_col3_pq3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Bluetooth */ + bt-shutdown { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + bt-dev-wake { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + bt-host-wake { + nvidia,pins = "pu6"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi-vsync-pd6 { + nvidia,pins = "vi_vsync_pd6", + "vi_hsync_pd7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + nvidia,io-reset = <0>; + }; + vi-d10-pt2 { + nvidia,pins = "vi_d10_pt2", + "vi_d0_pt4", + "pbb0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb-row0-pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad0-pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_wr_n_pi0", + "gmi_oe_n_pi1", + "gmi_dqs_pi2", + "gmi_adv_n_pk0", + "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad13-ph5 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad10-ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad14_ph6"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad12-ph4 { + nvidia,pins = "gmi_ad12_ph4", + "gmi_rst_n_pi4"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* USB2 VBUS control */ + usb2-vbus-control { + nvidia,pins = "gmi_ad15_ph7"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PWM pinmux */ + pwm-0 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pwm-2 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* S/PDIF pinmux */ + spdif-out { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif-in { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi-d4-pl2 { + nvidia,pins = "vi_d4_pl2"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi-d6-pl4 { + nvidia,pins = "vi_d6_pl4"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + nvidia,io-reset = <0>; + }; + vi-mclk-pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + jtag-rtck { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + crt-hsync-pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + clk1-out { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2-out { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3-out { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sys-clk-req { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2-req-pcc5 { + nvidia,pins = "clk2_req_pcc5", + "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3-req-pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* P1801-T specific pinmux */ + lcd-pwr2 { + nvidia,pins = "lcd_pwr2_pc6", + "lcd_dc1_pd2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd-m1 { + nvidia,pins = "lcd_m1_pw1"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + key-mode { + nvidia,pins = "gmi_cs4_n_pk2"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + splashtop { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "nand_alt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + w8-detect { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "nand_alt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2-mosi-px0 { + nvidia,pins = "spi2_mosi_px0"; + nvidia,function = "spi6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + tp-vendor { + nvidia,pins = "kb_row6_pr6", + "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + tp-power { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* GPIO power/drive control */ + drive-dap1 { + nvidia,pins = "drive_dap1", + "drive_dap2", + "drive_dbg", + "drive_at5", + "drive_gme", + "drive_ddc", + "drive_ao1", + "drive_uart3"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,low-power-mode = ; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + drive-sdio1 { + nvidia,pins = "drive_sdio1", + "drive_sdio3"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + }; + }; + + uartb: serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + status = "okay"; + + /* Broadcom GPS BCM47511 */ + }; + + uartc: serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + status = "okay"; + + /* Azurewave AW-AH691 BCM43241B0 */ + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <280000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + + /* Nuvoton NPCE791LA0DX embedded controller */ + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + accelerometer@f { + compatible = "kionix,kxtf9"; + reg = <0x0f>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_1v8_vio>; + vddio-supply = <&vdd_1v8_vio>; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; + }; + }; + + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <33000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + rt5640: audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + + realtek,dmic1-data-pin = <1>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + clock-names = "mclk"; + + realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_HIGH>; + }; + + /* Texas Instruments TPS659110 PMIC */ + pmic: pmic@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + wakeup-source; + + ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + ti,system-power-controller; + ti,sleep-keep-ck32k; + ti,sleep-enable; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_5v0_bat>; + vcc2-supply = <&vdd_5v0_bat>; + vcc3-supply = <&vdd_1v8_vio>; + vcc4-supply = <&vdd_5v0_bat>; + vcc5-supply = <&vdd_5v0_bat>; + vcc6-supply = <&vddio_ddr>; + vcc7-supply = <&vdd_5v0_bat>; + vccio-supply = <&vdd_5v0_bat>; + + pmic-sleep-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + }; + + regulators { + /* vdd1 is not used by Portable AiO */ + + vddio_ddr: vdd2 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_cpu: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <1>; + + nvidia,tegra-cpu-regulator; + }; + + vdd_1v8_vio: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + /* eMMC VDD */ + vcore_emmc: ldo1 { + regulator-name = "vdd_emmc_core"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* uSD slot VDD */ + vdd_usd: ldo2 { + regulator-name = "vdd_usd"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + /* uSD slot VDDIO */ + vddio_usd: ldo3 { + regulator-name = "vddio_usd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3100000>; + }; + + ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* ldo5 is not used by Portable AiO */ + + ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <8>; + }; + + ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <8>; + }; + }; + }; + + nct72: temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vcc-supply = <&vdd_3v3_sys>; + #thermal-sensor-cells = <1>; + }; + + vdd_core: core-regulator@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1770000>; + regulator-coupled-with = <&vdd_cpu>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-boot-on; + regulator-always-on; + ti,enable-vout-discharge; + ti,vsel0-state-high; + ti,vsel1-state-high; + + nvidia,tegra-core-regulator; + }; + }; + + vdd_5v0_bat: regulator-bat { + compatible = "regulator-fixed"; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_cp: regulator-sby { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_sby"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_5v0_sys: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_1v5_ddr: regulator-ddr { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_3v3_sys: regulator-3v { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_3v3_com: regulator-com { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + usb2_vbus: regulator-usb2 { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + hdmi_5v0_sys: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "hdmi_5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + pmc@7000e400 { + status = "okay"; + nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; + + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x81>; + }; + }; + + memory-controller@7000f000 { + emc-timings-3 { + /* Micron 2GB 800MHz */ + nvidia,ram-code = <3>; + + timing-25500000 { + clock-frequency = <25500000>; + + nvidia,emem-configuration = < 0x00030003 0xc0000020 + 0x00000001 0x00000001 0x00000002 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0502 0x75830303 0x001f0000 >; + }; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emem-configuration = < 0x00010003 0xc0000020 + 0x00000001 0x00000001 0x00000002 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0502 0x74630303 0x001f0000 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < 0x00000003 0xc0000030 + 0x00000001 0x00000001 0x00000003 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0503 0x73c30504 0x001f0000 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < 0x00000006 0xc0000025 + 0x00000001 0x00000001 0x00000005 0x00000002 + 0x00000003 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0505 0x73840a06 0x001f0000 >; + }; + + timing-400000000 { + clock-frequency = <400000000>; + + nvidia,emem-configuration = < 0x0000000c 0xc0000048 + 0x00000001 0x00000002 0x00000009 0x00000005 + 0x00000005 0x00000001 0x00000002 0x00000008 + 0x00000002 0x00000002 0x00000003 0x00000006 + 0x06030202 0x000d0709 0x7086120a 0x001f0000 >; + }; + + timing-800000000 { + clock-frequency = <800000000>; + + nvidia,emem-configuration = < 0x00000018 0xc0000090 + 0x00000004 0x00000005 0x00000013 0x0000000c + 0x0000000b 0x00000002 0x00000003 0x0000000c + 0x00000002 0x00000002 0x00000004 0x00000008 + 0x08040202 0x00160d13 0x712c2414 0x001f0000 >; + }; + }; + }; + + memory-controller@7000f400 { + emc-timings-3 { + /* Micron 2GB 800MHz */ + nvidia,ram-code = <3>; + + timing-25500000 { + clock-frequency = <25500000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < 0x00000001 + 0x00000006 0x00000000 0x00000000 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000000 + 0x00000000 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x00000009 + 0x0000000b 0x000000c0 0x00000000 0x00000030 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000007 0x00000007 + 0x00000004 0x00000001 0x00000000 0x00000004 + 0x00000005 0x000000c7 0x00000006 0x00000006 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000287 0xe8000000 0xff00ff00 >; + }; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < 0x00000002 + 0x0000000d 0x00000001 0x00000000 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000000 + 0x00000000 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x00000009 + 0x0000000b 0x00000181 0x00000000 0x00000060 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x0000000e 0x0000000e + 0x00000004 0x00000002 0x00000000 0x00000004 + 0x00000005 0x0000018e 0x00000006 0x00000006 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x8000040b 0xe8000000 0xff00ff00 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < 0x00000004 + 0x0000001a 0x00000003 0x00000001 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000001 + 0x00000001 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x00000009 + 0x0000000b 0x00000303 0x00000000 0x000000c0 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x0000001c 0x0000001c + 0x00000004 0x00000004 0x00000000 0x00000004 + 0x00000005 0x0000031c 0x00000006 0x00000006 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000713 0xe8000000 0xff00ff00 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < 0x00000009 + 0x00000035 0x00000007 0x00000002 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000002 + 0x00000002 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000006 0x00000004 0x00000009 + 0x0000000b 0x00000607 0x00000000 0x00000181 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000038 0x00000038 + 0x00000004 0x00000007 0x00000000 0x00000004 + 0x00000005 0x00000638 0x00000007 0x00000004 + 0x00000000 0x00000000 0x00004288 0x004400a4 + 0x00008000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00020000 + 0x00000100 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000d22 0xe8000000 0xff00ff00 >; + }; + + timing-400000000 { + clock-frequency = <400000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + + nvidia,emc-configuration = < 0x00000012 + 0x00000066 0x0000000c 0x00000004 0x00000003 + 0x00000008 0x00000002 0x0000000a 0x00000004 + 0x00000004 0x00000002 0x00000001 0x00000000 + 0x00000004 0x00000006 0x00000004 0x0000000a + 0x0000000c 0x00000bf0 0x00000000 0x000002fc + 0x00000001 0x00000008 0x00000001 0x00000000 + 0x00000008 0x0000000f 0x0000006c 0x00000200 + 0x00000004 0x0000000c 0x00000000 0x00000004 + 0x00000005 0x00000c30 0x00000000 0x00000004 + 0x00000000 0x00000000 0x00007088 0x001d0084 + 0x00008000 0x00044000 0x00044000 0x00044000 + 0x00044000 0x00044000 0x00044000 0x00044000 + 0x00044000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00048000 0x00048000 0x00048000 + 0x00048000 0x000002a0 0x0800013d 0x00000000 + 0x77fff884 0x01f1f508 0x05057404 0x54000007 + 0x080001e8 0x08000021 0x00000802 0x00020000 + 0x00000100 0x0158000c 0xa0f10000 0x00000000 + 0x00000000 0x800018c8 0xe8000000 0xff00ff89 >; + }; + + timing-800000000 { + clock-frequency = <800000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < 0x00000025 + 0x000000ce 0x0000001a 0x00000009 0x00000005 + 0x0000000d 0x00000004 0x00000013 0x00000009 + 0x00000009 0x00000003 0x00000001 0x00000000 + 0x00000007 0x0000000b 0x00000009 0x0000000b + 0x00000012 0x00001820 0x00000000 0x00000608 + 0x00000003 0x00000012 0x00000001 0x00000000 + 0x0000000f 0x00000018 0x000000d8 0x00000200 + 0x00000005 0x00000018 0x00000000 0x00000007 + 0x00000008 0x00001860 0x0000000c 0x00000004 + 0x00000000 0x00000000 0x00005088 0xf0070191 + 0x00008000 0x0000c00a 0x0000000a 0x0000000a + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x00018000 0x00018000 0x00018000 + 0x00018000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x000002a0 0x0800013d 0x22220000 + 0x77fff884 0x01f1f501 0x07077404 0x54000000 + 0x080001e8 0x08000021 0x00000802 0x00020000 + 0x00000100 0x00f0000c 0xa0f10202 0x00000000 + 0x00000000 0x8000308c 0xe8000000 0xff00ff49 >; + }; + }; + }; + + hda@70030000 { + status = "okay"; + }; + + ahub@70080000 { + i2s@70080400 { /* i2s1 */ + status = "okay"; + }; + + /* BT SCO */ + i2s@70080600 { /* i2s3 */ + status = "okay"; + }; + }; + + sdmmc1: mmc@78000000 { + status = "okay"; + + /* SDR104 mode unsupported yet */ + max-frequency = <104000000>; + + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + bus-width = <4>; + + vmmc-supply = <&vdd_usd>; /* ldo2 */ + vqmmc-supply = <&vddio_usd>; /* ldo3 */ + }; + + sdmmc3: mmc@78000400 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_com>; + vqmmc-supply = <&vdd_1v8_vio>; + + /* Azurewave AW-AH691 BCM43241B0 */ + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wake"; + }; + }; + + sdmmc4: mmc@78000600 { + status = "okay"; + bus-width = <8>; + + non-removable; + mmc-ddr-3_3v; + + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_1v8_vio>; + }; + + /* USB via ASUS connector */ + usb@7d000000 { + compatible = "nvidia,tegra30-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,hssync-start-delay = <0>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + vbus-supply = <&vdd_5v0_sys>; + }; + + /* mini-USB port */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <&usb2_vbus>; + }; + + /* Full size USB */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&vdd_5v0_bat>; + }; + + pad_battery: battery-cell { + compatible = "simple-battery"; + device-chemistry = "lithium-ion-polymer"; + charge-full-design-microamp-hours = <5136000>; + energy-full-design-microwatt-hours = <38000000>; + operating-range-celsius = <0 45>; + }; + + /* Connected to a 18.4" LVDS panel */ + bridge { + compatible = "mstar,tsumu88adt3-lf-1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + connector { + compatible = "hdmi-connector"; + label = "HDMI"; + type = "a"; + + /* low: tablet, high: dock */ + hpd-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_LOW>; + ddc-i2c-bus = <&hdmi_ddc>; + ddc-en-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu1: cpu@1 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu2: cpu@2 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu3: cpu@3 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + switch-docking-station-mode { + label = "Mode"; + gpios = <&gpio TEGRA_GPIO(K, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + }; + + opp-table-actmon { + opp-800000000 { + opp-supported-hw = <0x0006>; + }; + + /delete-node/ opp-900000000; + }; + + opp-table-emc { + opp-800000000-1300 { + opp-supported-hw = <0x0006>; + }; + + /delete-node/ opp-900000000-1350; + }; + + brcm_wifi_pwrseq: pwrseq-wifi { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + sound { + compatible = "asus,tegra-audio-rt5640-p1801-t", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "Asus Portable AiO P1801-T RT5642"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL", + "Speakers", "SPORP", + "Speakers", "SPORN", + "Speakers", "SPOLP", + "Speakers", "SPOLN", + "DMIC1", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5640>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + + thermal-zones { + /* + * NCT72 has two sensors: + * + * 0: internal that monitors ambient/skin temperature + * 1: external that is connected to the CPU's diode + * + * Ideally we should use userspace thermal governor, + * but it's a much more complex solution. The "skin" + * zone exists as a simpler solution which prevents + * the Portable AiO from getting too hot from a user's + * tactile perspective. The CPU zone is intended to + * protect silicon from damage. + */ + + skin-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct72 0>; + + trips { + trip0: skin-alert { + /* throttle at 57C until temperature drops to 56.8C */ + temperature = <57000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: skin-crit { + /* shut down at 65C */ + temperature = <65000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct72 1>; + + trips { + trip2: cpu-alert { + /* throttle at 75C until temperature drops to 74.8C */ + temperature = <75000>; + hysteresis = <200>; + type = "passive"; + }; + + trip3: cpu-crit { + /* shut down at 90C */ + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <&trip2>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts new file mode 100644 index 000000000000..5d9e23a43820 --- /dev/null +++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts @@ -0,0 +1,2500 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include +#include +#include + +#include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" + +/ { + model = "Asus VivoTab RT TF600T"; + compatible = "asus,tf600t", "nvidia,tegra30"; + chassis-type = "convertible"; + + aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc1; /* uSD slot */ + mmc2 = &sdmmc3; /* WiFi */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + display1 = &hdmi; + + serial1 = &uartc; /* Bluetooth */ + serial2 = &uartb; /* GPS */ + }; + + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + memory@80000000 { + reg = <0x80000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma@80000000 { + compatible = "shared-dma-pool"; + alloc-ranges = <0x80000000 0x30000000>; + size = <0x10000000>; /* 256MiB */ + linux,cma-default; + reusable; + }; + }; + + host1x@50000000 { + hdmi: hdmi@54280000 { + status = "okay"; + + hdmi-supply = <&hdmi_5v0_sys>; + pll-supply = <&vdd_1v8_vio>; + vdd-supply = <&vdd_3v3_sys>; + + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + }; + }; + + vde@6001a000 { + assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>; + assigned-clock-rates = <408000000>; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* SDMMC1 pinmux */ + sdmmc1-clk { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1-cmd { + nvidia,pins = "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7", + "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1-cd { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1-wp { + nvidia,pins = "vi_d11_pt3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC2 pinmux */ + vi-d1-pd5 { + nvidia,pins = "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d5_pl3", + "vi_d7_pl5"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi-d8-pl6 { + nvidia,pins = "vi_d8_pl6", + "vi_d9_pl7"; + nvidia,function = "sdmmc2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + nvidia,io-reset = <0>; + }; + + /* SDMMC3 pinmux */ + sdmmc3-clk { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3-cmd { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC4 pinmux */ + sdmmc4-clk { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4-cmd { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4-rst-n { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam-mclk { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* I2C pinmux */ + gen1-i2c { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = ; + }; + gen2-i2c { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = ; + }; + cam-i2c { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = ; + }; + ddc-i2c { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + }; + pwr-i2c { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = ; + }; + hotplug-i2c { + nvidia,pins = "pu4"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* HDMI pinmux */ + hdmi-cec { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,lock = ; + }; + hdmi-hpd { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-A */ + ulpi-data0-po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-data1-po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-data5-po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-data7-po0 { + nvidia,pins = "ulpi_data7_po0", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data6_po7"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-B */ + uartb-txd-rts { + nvidia,pins = "uart2_txd_pc2", + "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uartb-rxd-cts { + nvidia,pins = "uart2_rxd_pc3", + "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-C */ + uartc-rxd-cts { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uartc-txd-rts { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-D */ + ulpi-nxt-py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi-clk-py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* I2S pinmux */ + dap-i2s0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap-i2s1 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3-fs { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3-din { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3-dout { + nvidia,pins = "dap3_dout_pp2", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap-i2s3 { + nvidia,pins = "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + i2s4 { + nvidia,pins = "pbb7"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Sensors pinmux */ + nct-irq { + nvidia,pins = "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + hall { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Asus EC pinmux */ + ec-irqs { + nvidia,pins = "kb_row10_ps2", + "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ec-reqs { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Memory type bootstrap */ + mem-boostraps { + nvidia,pins = "gmi_ad4_pg4", + "gmi_ad5_pg5"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PCI-e pinmux */ + pex-l2-rst-n { + nvidia,pins = "pex_l2_rst_n_pcc6", + "pex_l0_rst_n_pdd1", + "pex_l1_rst_n_pdd5"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex-l2-clkreq-n { + nvidia,pins = "pex_l2_clkreq_n_pcc7", + "pex_l0_prsnt_n_pdd0", + "pex_l0_clkreq_n_pdd2", + "pex_wake_n_pdd3", + "pex_l1_prsnt_n_pdd4", + "pex_l1_clkreq_n_pdd6", + "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Display A pinmux */ + lcd-pwr0-pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pclk_pb3", + "lcd_pwr1_pc1", + "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_vsync_pj4", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_dc0_pn6", + "lcd_sdin_pz2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd-cs0-n-pn4 { + nvidia,pins = "lcd_sdout_pn5", + "lcd_wr_n_pz3", + "lcd_pwr2_pc6", + "lcd_dc1_pd2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + blink { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* KBC keys */ + kb-col0 { + nvidia,pins = "kb_col0_pq0", + "kb_row1_pr1", + "kb_row3_pr3", + "kb_row7_pr7", + "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb-col5 { + nvidia,pins = "kb_col5_pq5", + "kb_col7_pq7", + "kb_row2_pr2", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + gmi-cs0-n-pj0 { + nvidia,pins = "gmi_wp_n_pc7", + "gmi_wait_pi7", + "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs2_n_pk3", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + vi-pclk-pt0 { + nvidia,pins = "vi_pclk_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + nvidia,io-reset = <0>; + }; + + /* GPIO keys pinmux */ + power-key { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vol-keys { + nvidia,pins = "kb_col3_pq3", + "kb_col4_pq4"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Bluetooth */ + bt-shutdown { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + bt-dev-wake { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + bt-host-wake { + nvidia,pins = "pu6"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + vi-vsync-pd6 { + nvidia,pins = "vi_vsync_pd6", + "vi_hsync_pd7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + nvidia,io-reset = <0>; + }; + vi-d10-pt2 { + nvidia,pins = "vi_d10_pt2", + "vi_d0_pt4", + "pbb0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb-row0-pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad0-pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_wr_n_pi0", + "gmi_oe_n_pi1", + "gmi_dqs_pi2", + "gmi_adv_n_pk0", + "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad13-ph5 { + nvidia,pins = "gmi_ad13_ph5"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad10-ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad14_ph6"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi-ad12-ph4 { + nvidia,pins = "gmi_ad12_ph4", + "gmi_rst_n_pi4", + "gmi_cs7_n_pi6"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Vibrator control */ + vibrator { + nvidia,pins = "gmi_ad11_ph3"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* PWM pinmux */ + pwm-0 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pwm-2 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + gmi-cs-n { + nvidia,pins = "gmi_cs4_n_pk2", + "gmi_cs6_n_pi3"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Spdif pinmux */ + spdif-out { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif-in { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + vi-d4-pl2 { + nvidia,pins = "vi_d4_pl2"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + vi-d6-pl4 { + nvidia,pins = "vi_d6_pl4"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = <0>; + nvidia,io-reset = <0>; + }; + vi-mclk-pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + jtag { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + crt-sync { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + clk1-out { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2-out { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3-out { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sys-clk-req { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + clk2-req-pcc5 { + nvidia,pins = "clk2_req_pcc5", + "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3-req-pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* GPIO power/drive control */ + drive-dap1 { + nvidia,pins = "drive_dap1", + "drive_dap2", + "drive_dbg", + "drive_at5", + "drive_gme", + "drive_ddc", + "drive_ao1", + "drive_uart3"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,low-power-mode = ; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + drive-sdio1 { + nvidia,pins = "drive_sdio1", + "drive_sdio3"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + drive-sdmmc4 { + nvidia,pins = "drive_gma", + "drive_gmb", + "drive_gmc", + "drive_gmd"; + nvidia,pull-down-strength = <9>; + nvidia,pull-up-strength = <9>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + }; + }; + + uartb: serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + status = "okay"; + + /* Broadcom GPS BCM47511 */ + }; + + uartc: serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + status = "okay"; + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>, + <1000000 4000000 136>; + + /* Azurewave AW-NH665 BCM4330B1 */ + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <4000000>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "txco"; + + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wakeup"; + + device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + + vbat-supply = <&vdd_3v3_com>; + vddio-supply = <&vdd_1v8_vio>; + }; + }; + + pwm@7000a000 { + status = "okay"; + }; + + gen1_i2c: i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + /* Nuvoton NPCE698LA0BX embedded controller */ + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + + /* Atmel Maxtouch MXT1664 HID over I2C */ + touchscreen@4b { + compatible = "hid-over-i2c"; + reg = <0x4b>; + + hid-descr-addr = <0x0000>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_3v3_sys>; + vddl-supply = <&vdd_1v8_vio>; + }; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + /* TI TPS61050/61052 Boost Converter */ + flash-led@33 { + compatible = "ti,tps61052"; + reg = <0x33>; + + led { + color = ; + }; + }; + + imu@69 { + compatible = "invensense,mpu6050"; + reg = <0x69>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_3v3_sys>; + vddio-supply = <&vdd_1v8_vio>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "-1"; + + /* External I2C interface */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@d { + compatible = "asahi-kasei,ak8975"; + reg = <0x0d>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_3v3_sys>; + vid-supply = <&vdd_1v8_vio>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "-1"; + }; + }; + }; + }; + + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <93750>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + rt5640: audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + + interrupt-parent = <&gpio>; + interrupts = ; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + clock-names = "mclk"; + }; + + /* Texas Instruments TPS659110 PMIC */ + pmic: pmic@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + ti,system-power-controller; + ti,sleep-keep-ck32k; + ti,sleep-enable; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_5v0_bat>; + vcc2-supply = <&vdd_5v0_bat>; + vcc3-supply = <&vdd_1v8_vio>; + vcc4-supply = <&vdd_5v0_sys>; + vcc5-supply = <&vdd_5v0_bat>; + vcc6-supply = <&vdd_3v3_sys>; + vcc7-supply = <&vdd_5v0_bat>; + vccio-supply = <&vdd_5v0_bat>; + + pmic-sleep-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + }; + + regulators { + vdd_lcd: vdd1 { + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <8>; + }; + + vddio_ddr: vdd2 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_cpu: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <1>; + + nvidia,tegra-cpu-regulator; + }; + + vdd_1v8_vio: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + /* eMMC VDD */ + vcore_emmc: ldo1 { + regulator-name = "vdd_emmc_core"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* ldo2 and ldo3 are not used by TF600T */ + + ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* uSD slot VDDIO */ + vddio_usd: ldo5 { + regulator-name = "vddio_sdmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + avdd_dsi_csi: ldo6 { + regulator-name = "avdd_dsi_csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <8>; + }; + + ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <8>; + }; + }; + }; + + /* Capella CM3218 ambient light sensor */ + light-sensor@48 { + compatible = "capella,cm32181"; + reg = <0x48>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_3v3_als>; + }; + + nct72: temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vcc-supply = <&vdd_3v3_sys>; + #thermal-sensor-cells = <1>; + }; + + vdd_core: core-regulator@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1770000>; + regulator-coupled-with = <&vdd_cpu>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-boot-on; + regulator-always-on; + ti,enable-vout-discharge; + ti,vsel0-state-high; + ti,vsel1-state-high; + + nvidia,tegra-core-regulator; + }; + }; + + pmc@7000e400 { + status = "okay"; + nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; + + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x81>; + }; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + flash@1 { + compatible = "winbond,w25q32", "jedec,spi-nor"; + reg = <1>; + + spi-max-frequency = <20000000>; + vcc-supply = <&vdd_3v3_sys>; + }; + }; + + memory-controller@7000f000 { + emc-timings-0 { + /* Elpida 2GB 750 MHZ */ + nvidia,ram-code = <0>; + + timing-25500000 { + clock-frequency = <25500000>; + + nvidia,emem-configuration = < 0x00020001 0xc0000010 + 0x00000001 0x00000001 0x00000002 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0502 0x75e30303 0x001f0000 >; + }; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emem-configuration = < 0x00010001 0xc0000010 + 0x00000001 0x00000001 0x00000002 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0502 0x74e30303 0x001f0000 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < 0x00000001 0xc0000018 + 0x00000001 0x00000001 0x00000003 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0503 0x74430504 0x001f0000 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < 0x00000003 0xc0000025 + 0x00000001 0x00000001 0x00000005 0x00000002 + 0x00000003 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0505 0x74040a06 0x001f0000 >; + }; + + timing-375000000 { + clock-frequency = <375000000>; + + nvidia,emem-configuration = < 0x00000005 0xc0000044 + 0x00000001 0x00000002 0x00000009 0x00000005 + 0x00000005 0x00000001 0x00000002 0x00000008 + 0x00000002 0x00000002 0x00000003 0x00000006 + 0x06030202 0x000d0709 0x7086110a 0x001f0000 >; + }; + + timing-750000000 { + clock-frequency = <750000000>; + + nvidia,emem-configuration = < 0x0000000b 0xc0000087 + 0x00000004 0x00000005 0x00000012 0x0000000c + 0x0000000b 0x00000002 0x00000003 0x0000000c + 0x00000002 0x00000002 0x00000004 0x00000008 + 0x08040202 0x00160d12 0x710c2213 0x001f0000 >; + }; + }; + + emc-timings-1 { + /* Hynix 2GB 750 MHZ */ + nvidia,ram-code = <1>; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emem-configuration = < 0x00010003 0xc0000010 + 0x00000001 0x00000001 0x00000002 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0502 0x74630303 0x001f0000 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < 0x00000003 0xc0000018 + 0x00000001 0x00000001 0x00000003 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0503 0x73c30504 0x001f0000 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < 0x00000006 0xc0000025 + 0x00000001 0x00000001 0x00000005 0x00000002 + 0x00000003 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0505 0x73840a06 0x001f0000 >; + }; + + timing-375000000 { + clock-frequency = <375000000>; + + nvidia,emem-configuration = < 0x0000000b 0xc0000044 + 0x00000001 0x00000002 0x00000009 0x00000005 + 0x00000005 0x00000001 0x00000002 0x00000008 + 0x00000002 0x00000002 0x00000003 0x00000006 + 0x06030202 0x000c0609 0x7086110a 0x001f0000 >; + }; + + timing-750000000 { + clock-frequency = <750000000>; + + nvidia,emem-configuration = < 0x00000016 0xc0000087 + 0x00000003 0x00000004 0x00000012 0x0000000c + 0x0000000b 0x00000002 0x00000003 0x0000000c + 0x00000002 0x00000002 0x00000004 0x00000008 + 0x08040202 0x00150c12 0x710c2213 0x001f0000 >; + }; + }; + + emc-timings-2 { + /* Micron 2GB 750 MHZ */ + nvidia,ram-code = <2>; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emem-configuration = < 0x00010003 0xc0000010 + 0x00000001 0x00000001 0x00000002 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0502 0x73430303 0x001f0000 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < 0x00000003 0xc0000018 + 0x00000001 0x00000001 0x00000003 0x00000000 + 0x00000001 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0503 0x74430504 0x001f0000 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < 0x00000006 0xc0000025 + 0x00000001 0x00000001 0x00000005 0x00000002 + 0x00000003 0x00000001 0x00000003 0x00000008 + 0x00000002 0x00000001 0x00000002 0x00000006 + 0x06020102 0x000a0505 0x74040a06 0x001f0000 >; + }; + + timing-375000000 { + clock-frequency = <375000000>; + + nvidia,emem-configuration = < 0x0000000b 0xc0000044 + 0x00000001 0x00000002 0x00000009 0x00000005 + 0x00000005 0x00000001 0x00000002 0x00000008 + 0x00000002 0x00000002 0x00000003 0x00000006 + 0x06030202 0x000d0709 0x7086110a 0x001f0000 >; + }; + + timing-750000000 { + clock-frequency = <750000000>; + + nvidia,emem-configuration = < 0x00000016 0xc0000087 + 0x00000004 0x00000005 0x00000012 0x0000000c + 0x0000000b 0x00000003 0x00000003 0x0000000c + 0x00000002 0x00000002 0x00000004 0x00000008 + 0x08040202 0x00160d12 0x710c2213 0x001f0000 >; + }; + }; + }; + + memory-controller@7000f400 { + emc-timings-0 { + /* Elpida 2GB 750 MHZ */ + nvidia,ram-code = <0>; + + timing-25500000 { + clock-frequency = <25500000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000001 + 0x00000007 0x00000000 0x00000000 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000000 + 0x00000000 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x0000000a + 0x0000000b 0x000000c0 0x00000000 0x00000030 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000008 0x00000008 + 0x00000004 0x00000001 0x00000000 0x00000004 + 0x00000005 0x000000c7 0x00000006 0x00000004 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000287 0xe8000000 0xff00ff00 >; + }; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000002 + 0x0000000f 0x00000001 0x00000000 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000000 + 0x00000000 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x0000000a + 0x0000000b 0x00000181 0x00000000 0x00000060 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000010 0x00000010 + 0x00000004 0x00000002 0x00000000 0x00000004 + 0x00000005 0x0000018e 0x00000006 0x00000004 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x8000040b 0xe8000000 0xff00ff00 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000004 + 0x0000001e 0x00000003 0x00000001 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000001 + 0x00000001 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x0000000a + 0x0000000b 0x00000303 0x00000000 0x000000c0 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000020 0x00000020 + 0x00000004 0x00000004 0x00000000 0x00000004 + 0x00000005 0x0000031c 0x00000006 0x00000004 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000713 0xe8000000 0xff00ff00 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000009 + 0x0000003d 0x00000007 0x00000002 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000002 + 0x00000002 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000006 0x00000004 0x0000000a + 0x0000000b 0x00000607 0x00000000 0x00000181 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000040 0x00000040 + 0x00000004 0x00000007 0x00000000 0x00000004 + 0x00000005 0x00000638 0x00000007 0x00000004 + 0x00000000 0x00000000 0x00004288 0x004400a4 + 0x00008000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00020000 + 0x00000100 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000d22 0xe8000000 0xff00ff00 >; + }; + + timing-375000000 { + clock-frequency = <375000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200040>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + + nvidia,emc-configuration = < 0x00000011 + 0x0000006f 0x0000000c 0x00000004 0x00000003 + 0x00000008 0x00000002 0x0000000a 0x00000004 + 0x00000004 0x00000002 0x00000001 0x00000000 + 0x00000004 0x00000006 0x00000004 0x0000000a + 0x0000000c 0x00000b2d 0x00000000 0x000002cb + 0x00000001 0x00000008 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000075 0x00000200 + 0x00000004 0x0000000c 0x00000000 0x00000004 + 0x00000005 0x00000b6d 0x00000000 0x00000004 + 0x00000000 0x00000000 0x00007088 0x00200084 + 0x00008000 0x00034000 0x00034000 0x00034000 + 0x00034000 0x00014000 0x00014000 0x00014000 + 0x00014000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00048000 0x00048000 0x00048000 + 0x00048000 0x000002a0 0x0600013d 0x00000000 + 0x77fff884 0x01f1f508 0x05057404 0x54000007 + 0x080001e8 0x06000021 0x00000802 0x00020000 + 0x00000100 0x0150000c 0xa0f10000 0x00000000 + 0x00000000 0x8000174b 0xe8000000 0xff00ff89 >; + }; + + timing-750000000 { + clock-frequency = <750000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200058>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < 0x00000023 + 0x000000df 0x00000019 0x00000009 0x00000005 + 0x0000000d 0x00000004 0x00000013 0x00000009 + 0x00000009 0x00000003 0x00000001 0x00000000 + 0x00000007 0x0000000b 0x00000009 0x0000000b + 0x00000011 0x0000169a 0x00000000 0x000005a6 + 0x00000003 0x00000010 0x00000001 0x00000000 + 0x0000000e 0x00000018 0x000000e9 0x00000200 + 0x00000005 0x00000017 0x00000000 0x00000007 + 0x00000008 0x000016da 0x0000000c 0x00000004 + 0x00000000 0x00000000 0x00005088 0xf0080191 + 0x00008000 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x00000008 0x00000008 0x00000008 + 0x00000008 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x000002a0 0x0600013d 0x22220000 + 0x77fff884 0x01f1f501 0x07077404 0x54000000 + 0x080001e8 0x06000021 0x00000802 0x00020000 + 0x00000100 0x00df000c 0xa0f10000 0x00000000 + 0x00000000 0x80002d93 0xf8000000 0xff00ff49 >; + }; + }; + + emc-timings-1 { + /* Hynix 2GB 750 MHZ */ + nvidia,ram-code = <1>; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000002 + 0x0000000d 0x00000001 0x00000000 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000000 + 0x00000000 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x0000000a + 0x0000000b 0x00000181 0x00000000 0x00000060 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x0000000e 0x0000000e + 0x00000004 0x00000002 0x00000000 0x00000004 + 0x00000005 0x0000018e 0x00000006 0x00000004 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x8000040b 0xe8000000 0xff00ff00 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000004 + 0x0000001a 0x00000003 0x00000001 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000001 + 0x00000001 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x0000000a + 0x0000000b 0x00000303 0x00000000 0x000000c0 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x0000001c 0x0000001c + 0x00000004 0x00000004 0x00000000 0x00000004 + 0x00000005 0x0000031c 0x00000006 0x00000004 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000713 0xe8000000 0xff00ff00 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000009 + 0x00000035 0x00000007 0x00000002 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000002 + 0x00000002 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000006 0x00000004 0x0000000a + 0x0000000b 0x00000607 0x00000000 0x00000181 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000038 0x00000038 + 0x00000004 0x00000007 0x00000000 0x00000004 + 0x00000005 0x00000638 0x00000007 0x00000004 + 0x00000000 0x00000000 0x00004288 0x004400a4 + 0x00008000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00020000 + 0x00000100 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000d22 0xe8000000 0xff00ff00 >; + }; + + timing-375000000 { + clock-frequency = <375000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200040>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + + nvidia,emc-configuration = < 0x00000011 + 0x00000060 0x0000000c 0x00000003 0x00000004 + 0x00000008 0x00000002 0x0000000a 0x00000003 + 0x00000003 0x00000002 0x00000001 0x00000000 + 0x00000004 0x00000006 0x00000004 0x0000000a + 0x0000000c 0x00000b2d 0x00000000 0x000002cb + 0x00000001 0x00000008 0x00000001 0x00000000 + 0x00000007 0x00000010 0x00000066 0x00000200 + 0x00000004 0x0000000c 0x00000000 0x00000004 + 0x00000005 0x00000b6d 0x00000000 0x00000004 + 0x00000000 0x00000000 0x00007288 0x00200084 + 0x00008000 0x00044000 0x00044000 0x00044000 + 0x00044000 0x00014000 0x00014000 0x00014000 + 0x00014000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00048000 0x00048000 0x00048000 + 0x00048000 0x000002a0 0x0600013d 0x00000000 + 0x77fff884 0x01f1f508 0x05057404 0x54000007 + 0x08000168 0x06000021 0x00000802 0x00020000 + 0x00000100 0x015f000c 0xa0f10000 0x00000000 + 0x00000000 0x8000174b 0xe8000000 0xff00ff89 >; + }; + + timing-750000000 { + clock-frequency = <750000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200058>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < 0x00000023 + 0x000000c1 0x00000019 0x00000008 0x00000005 + 0x0000000d 0x00000004 0x00000013 0x00000008 + 0x00000008 0x00000003 0x00000001 0x00000000 + 0x00000007 0x0000000b 0x00000009 0x0000000b + 0x00000011 0x0000169a 0x00000000 0x000005a6 + 0x00000003 0x00000010 0x00000001 0x00000000 + 0x0000000e 0x00000018 0x000000cb 0x00000200 + 0x00000005 0x00000017 0x00000000 0x00000007 + 0x00000008 0x000016da 0x0000000c 0x00000004 + 0x00000000 0x00000000 0x00005088 0xf0080191 + 0x00008000 0x00008008 0x00000008 0x00000008 + 0x00000008 0x00000008 0x00000008 0x00000008 + 0x00000008 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x000002a0 0x0800013d 0x22220000 + 0x77fff884 0x01f1f501 0x07077404 0x54000000 + 0x080001e8 0x08000021 0x00000802 0x00020000 + 0x00000100 0x00fd000c 0xa0f10000 0x00000000 + 0x00000000 0x80002d93 0xe8000000 0xff00ff49 >; + }; + }; + + emc-timings-2 { + /* Micron 2GB 750 MHZ */ + nvidia,ram-code = <2>; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000002 + 0x00000008 0x00000001 0x00000000 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000000 + 0x00000000 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x0000000a + 0x0000000b 0x00000181 0x00000000 0x00000060 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000009 0x00000009 + 0x00000004 0x00000002 0x00000000 0x00000004 + 0x00000005 0x0000018e 0x00000006 0x00000004 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x8000040b 0xe8000000 0xff00ff00 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000004 + 0x0000001e 0x00000003 0x00000001 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000001 + 0x00000001 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000005 0x00000004 0x0000000a + 0x0000000b 0x00000303 0x00000000 0x000000c0 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000020 0x00000020 + 0x00000004 0x00000004 0x00000000 0x00000004 + 0x00000005 0x0000031c 0x00000006 0x00000004 + 0x00000000 0x00000000 0x00004288 0x007800a4 + 0x00008000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x000fc000 0x000fc000 0x000fc000 + 0x000fc000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00000000 + 0x00000040 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000713 0xe8000000 0xff00ff00 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200048>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + nvidia,emc-cfg-dyn-self-ref; + + nvidia,emc-configuration = < 0x00000009 + 0x0000003d 0x00000007 0x00000002 0x00000002 + 0x0000000a 0x00000005 0x0000000b 0x00000002 + 0x00000002 0x00000003 0x00000001 0x00000000 + 0x00000005 0x00000006 0x00000004 0x0000000a + 0x0000000b 0x00000607 0x00000000 0x00000181 + 0x00000002 0x00000002 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000040 0x00000040 + 0x00000004 0x00000007 0x00000000 0x00000004 + 0x00000005 0x00000638 0x00000007 0x00000004 + 0x00000000 0x00000000 0x00004288 0x004400a4 + 0x00008000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x000002a0 0x0800211c 0x00000000 + 0x77fff884 0x01f1f108 0x05057404 0x54000007 + 0x08000168 0x08000000 0x00000802 0x00020000 + 0x00000100 0x000c000c 0xa0f10000 0x00000000 + 0x00000000 0x80000d22 0xe8000000 0xff00ff00 >; + }; + + timing-375000000 { + clock-frequency = <375000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200040>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + + nvidia,emc-configuration = < 0x00000011 + 0x0000006f 0x0000000c 0x00000004 0x00000003 + 0x00000008 0x00000002 0x0000000a 0x00000004 + 0x00000004 0x00000002 0x00000001 0x00000000 + 0x00000004 0x00000006 0x00000004 0x0000000a + 0x0000000c 0x00000b2d 0x00000000 0x000002cb + 0x00000001 0x00000008 0x00000001 0x00000000 + 0x00000007 0x0000000f 0x00000075 0x00000200 + 0x00000004 0x0000000c 0x00000000 0x00000004 + 0x00000005 0x00000b6d 0x00000000 0x00000004 + 0x00000000 0x00000000 0x00007088 0x00200084 + 0x00008000 0x00044000 0x00044000 0x00044000 + 0x00044000 0x00014000 0x00014000 0x00014000 + 0x00014000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00048000 0x00048000 0x00048000 + 0x00048000 0x000002a0 0x0800013d 0x00000000 + 0x77fff884 0x01f1f508 0x05057404 0x54000007 + 0x080001e8 0x08000021 0x00000802 0x00020000 + 0x00000100 0x0150000c 0xa0f10000 0x00000000 + 0x00000000 0x8000174b 0xe8000000 0xff00ff89 >; + }; + + timing-750000000 { + clock-frequency = <750000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200058>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < 0x00000023 + 0x000000df 0x00000019 0x00000009 0x00000005 + 0x0000000d 0x00000004 0x00000013 0x00000009 + 0x00000009 0x00000006 0x00000001 0x00000000 + 0x00000007 0x0000000b 0x00000009 0x0000000b + 0x00000011 0x0000169a 0x00000000 0x000005a6 + 0x00000003 0x00000010 0x00000001 0x00000000 + 0x0000000e 0x00000018 0x000000e9 0x00000200 + 0x00000005 0x00000017 0x00000000 0x00000007 + 0x00000008 0x000016da 0x0000000c 0x00000004 + 0x00000000 0x00000000 0x00005088 0xf0080191 + 0x00008000 0x0000800a 0x0000000a 0x0000000a + 0x0000000a 0x00000008 0x00000008 0x00000008 + 0x00000008 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x007fc00a 0x0000000a 0x0000000a + 0x0000000a 0x000002a0 0x0800013d 0x22220000 + 0x77fff884 0x01f1f501 0x07077404 0x54000000 + 0x080001e8 0x08000021 0x00000802 0x00020000 + 0x00000100 0x00df000c 0xa0f10000 0x00000000 + 0x00000000 0x80002d93 0xf8000000 0xff00ff49 >; + }; + }; + }; + + hda@70030000 { + status = "okay"; + }; + + ahub@70080000 { + i2s@70080400 { /* i2s1 */ + status = "okay"; + }; + + /* BT SCO */ + i2s@70080600 { /* i2s3 */ + status = "okay"; + }; + }; + + sdmmc1: mmc@78000000 { + status = "okay"; + bus-width = <4>; + + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vdd_3v3_sys>; + vqmmc-supply = <&vddio_usd>; + }; + + sdmmc3: mmc@78000400 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>; + assigned-clock-rates = <50000000>; + + max-frequency = <50000000>; + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_com>; + vqmmc-supply = <&vdd_1v8_vio>; + + /* Azurewave AW-NH665 BCM4330B1 */ + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wake"; + }; + }; + + sdmmc4: mmc@78000600 { + status = "okay"; + bus-width = <8>; + + non-removable; + mmc-ddr-1_8v; + + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_1v8_vio>; + }; + + /* USB via ASUS connector */ + usb@7d000000 { + compatible = "nvidia,tegra30-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,hssync-start-delay = <0>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + vbus-supply = <&vdd_5v0_sys>; + }; + + /* Dock's USB port */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&vdd_5v0_bat>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_5v0_bl>; + pwms = <&pwm 0 71428>; + + brightness-levels = <1 255>; + num-interpolated-steps = <254>; + default-brightness-level = <15>; + }; + + pad_battery: battery-pad { + compatible = "simple-battery"; + device-chemistry = "lithium-ion-polymer"; + charge-full-design-microamp-hours = <6760000>; + energy-full-design-microwatt-hours = <25000000>; + operating-range-celsius = <0 45>; + }; + + dock_battery: battery-dock { + compatible = "simple-battery"; + device-chemistry = "lithium-ion-polymer"; + charge-full-design-microamp-hours = <2980000>; + energy-full-design-microwatt-hours = <22000000>; + operating-range-celsius = <0 45>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu1: cpu@1 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu2: cpu@2 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + cpu3: cpu@3 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + }; + + extcon-keys { + compatible = "gpio-keys"; + + switch-dock-hall-sensor { + label = "Lid sensor"; + gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <500>; + wakeup-event-action = ; + wakeup-source; + }; + + switch-lineout-detect { + label = "Audio dock line-out detect"; + gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + }; + + haptic-feedback { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + vcc-supply = <&vdd_3v3_sys>; + }; + + opp-table-actmon { + /delete-node/ opp-800000000; + /delete-node/ opp-900000000; + }; + + opp-table-emc { + /delete-node/ opp-800000000-1300; + /delete-node/ opp-900000000-1350; + }; + + brcm_wifi_pwrseq: pwrseq-wifi { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + vdd_5v0_bat: regulator-bat { + compatible = "regulator-fixed"; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_cp: regulator-sby { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_sby"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_5v0_sys: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_1v5_ddr: regulator-ddr { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_3v3_sys: regulator-3v { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + vdd_3v3_com: regulator-com { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_als: regulator-als { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_als"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio TEGRA_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_5v0_bl: regulator-bl { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_bat>; + }; + + hdmi_5v0_sys: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "hdmi_5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + sound { + compatible = "asus,tegra-audio-rt5640-tf600t", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "Asus VivoTab RT TF600T RT5640"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL", + "Speakers", "SPORP", + "Speakers", "SPORN", + "Speakers", "SPOLP", + "Speakers", "SPOLN", + "DMIC1", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5640>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; + + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + + thermal-zones { + /* + * NCT72 has two sensors: + * + * 0: internal that monitors ambient/skin temperature + * 1: external that is connected to the CPU's diode + * + * Ideally we should use userspace thermal governor, + * but it's a much more complex solution. The "skin" + * zone exists as a simpler solution which prevents + * Transformers from getting too hot from a user's + * tactile perspective. The CPU zone is intended to + * protect silicon from damage. + */ + + skin-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct72 0>; + + trips { + trip0: skin-alert { + /* throttle at 57C until temperature drops to 56.8C */ + temperature = <57000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: skin-crit { + /* shut down at 65C */ + temperature = <65000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct72 1>; + + trips { + trip2: cpu-alert { + /* throttle at 75C until temperature drops to 74.8C */ + temperature = <75000>; + hysteresis = <200>; + type = "passive"; + }; + + trip3: cpu-crit { + /* shut down at 90C */ + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <&trip2>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&actmon THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts index 4012f9c799a8..b7d0ebb766a6 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts +++ b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts @@ -1155,6 +1155,14 @@ lcd_ddc: i2c@7000c000 { status = "okay"; clock-frequency = <400000>; + embedded-controller@10 { + compatible = "pegatron,chagall-ec"; + reg = <0x10>; + + monitored-battery = <&battery>; + power-supplies = <&mains>; + }; + /* Wolfson Microelectronics WM8903 audio codec */ wm8903: audio-codec@1a { compatible = "wlf,wm8903"; @@ -2596,6 +2604,14 @@ backlight: backlight { default-brightness-level = <15>; }; + battery: battery-cell { + compatible = "simple-battery"; + device-chemistry = "lithium-ion-polymer"; + charge-full-design-microamp-hours = <3050000>; + energy-full-design-microwatt-hours = <23000000>; + operating-range-celsius = <0 45>; + }; + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ clk32k_in: clock-32k { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index 8b3abe817e12..de4142e8f3ce 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -356,6 +356,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-dhcom-pdk2.dtb \ imx6ull-dhcom-picoitx.dtb \ imx6ull-dhcor-maveo-box.dtb \ + imx6ull-engicam-microgea-bmm.dtb \ + imx6ull-engicam-microgea-gtw.dtb \ + imx6ull-engicam-microgea-rmm.dtb \ imx6ull-jozacp.dtb \ imx6ull-kontron-bl.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts index 5f62c99909c5..872cf7e16f20 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2013-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts index 9c9122da3737..96c37f4296e5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2013-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi index 29e3f5f37c25..88855d3b2031 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2012-2017 * based on imx53-qsb.dts * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx53.dtsi" diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts index 82d5f85722ea..50dd3df9dd04 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts index 59b8afc36e66..8ca5b6b8da07 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts index 21bdfaf8df53..b94455406a57 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts index 103261ea9334..dd978105b42f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts index 9c6d3cd3d6a7..172dad423639 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts index 7436626673fc..136ae7841878 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts index fc23b4d291a1..e1b525ed292a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts index 9eb2ef17339c..9a6a5cda9a3b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts index 4101c6597721..0e8f4c3f3760 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts index a5532ecc18c5..9958e8701c98 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts index 67ed0452f5de..d9bfd340efb2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts index d34189fc52d9..8243f0d6d387 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts index 7030b2654bbd..2d031403ab19 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts index aef5fcc42904..684a2583db75 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts index 5342f2f5a8a8..7fdc794615f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts index c4588fb0bf6f..209aaebe148a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts index 2c7feeef1b0e..44d1871ac666 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts index e9c224cea752..22842f2ef685 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts index 735f2bbf1439..c69fdd064e2f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts index a182e4cb0e6e..a9a33eeb9712 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts index ca1e2ae3341e..25a93cd4e5f5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts index 393bfec58e2f..d630c572c704 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts index 4ee860b626ff..01ac3493fa32 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts index 1ab175ffa238..1013025cb2d5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts index 0a4daec8d3ad..5dd8f1642db3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts index 9ffbb0fe7df8..ffa79c0eb05a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts index cb2fcb4896c6..1346fd663d68 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts index d43a5d8f1749..eac07d5944cc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts index f7b0acb65352..c485da35d333 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts index 387edf2b3f96..53304fc3a90b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi index 29960d1cf6a0..009a9d56757c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi index c6e231de674a..e3b677384a22 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2016 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index d0f648938cae..ce1d49a9e0cd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index 71911df881cc..50b484998c49 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi index 716c324a7458..3125cd04d4ea 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi index 77594546ef37..cdeaca36867e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi index 4eb53d5677a6..63d09c01a3c6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi index bae7313d729d..dd4e5bce4a55 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi index 2fa37d1b16cc..2bb5b762c984 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2014-2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts index 92b38e6699aa..3183abdd25aa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts index ffc0f2ee11d2..174824a8138e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts index 07ad70718aec..31854bc52e76 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts index dd494d587014..dfe1535128fe 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi index 29d2f86d5e34..f4c45e964daf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi @@ -168,7 +168,6 @@ &uart2 { pinctrl-0 = <&pinctrl_uart2>; linux,rs485-enabled-at-boot-time; rs485-rx-during-tx; - rs485-rts-active-low; uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi index dcf88f610346..4c0ac4d4df68 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi @@ -26,8 +26,29 @@ &ecspi2 { flash@0 { compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; - spi-max-frequency = <50000000>; reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0xf0000>; + label = "u-boot"; + }; + + partition@f0000 { + reg = <0xf0000 0x8000>; + label = "env"; + }; + + partition@f8000 { + reg = <0xf8000 0x8000>; + label = "env_redundant"; + }; + }; }; }; @@ -61,7 +82,7 @@ &qspi { pinctrl-0 = <&pinctrl_qspi>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts index 8c2f3df79b47..188f3a2a312f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts index d82698e7d50f..247a0aab7791 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts index 20c810a81403..84b45542814e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index 278120404d31..f053358bc931 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2015 Lothar Waßmann - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts new file mode 100644 index 000000000000..279d46c22cd7 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + +#include "imx6ull-engicam-microgea.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull-bmm", + "engicam,microgea-imx6ull", "fsl,imx6ull"; + model = "Engicam MicroGEA i.MX6ULL BMM Board"; + + backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <85>; + pwms = <&pwm8 0 100000 0>; + }; + + buzzer { + compatible = "pwm-beeper"; + pwms = <&pwm4 0 1000000 0>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_ext_pwr: regulator-ext-pwr { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ext_pwr>; + regulator-name = "ext-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6ull-microgea-bmm-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mclk>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6UL_CLK_CKO>; + assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>, + <&clks IMX6UL_CLK_CKO2_PODF>, + <&clks IMX6UL_CLK_CKO2>, + <&clks IMX6UL_CLK_CKO>; + assigned-clock-parents = <&clks IMX6UL_CLK_OSC>, + <&clks IMX6UL_CLK_CKO2_SEL>, + <&clks IMX6UL_CLK_CKO2_PODF>, + <&clks IMX6UL_CLK_CKO2>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + measure-delay-time = <0x9ffff>; + pre-charge-time = <0xfff>; + xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +/* MicroSD */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_3v3>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_can: can-grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_mclk: mclkgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x13009 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x11008 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x000b0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x000b0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x000b0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x000b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_reg_usb2: regusb2grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_reg_ext_pwr: reg-ext-pwrgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts new file mode 100644 index 000000000000..d500f8839102 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + +#include "imx6ull-engicam-microgea.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull-gtw", + "engicam,microgea-imx6ull", "fsl,imx6ull"; + model = "Engicam MicroGEA i.MX6ULL GTW Board"; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>, <&pinctrl_pwrled>; + + led-0 { + gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-1 { + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + }; + + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* MicroSD */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <®_3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x130b0 + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x130b0 + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x130b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_pwrled: ledsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x130b0 + >; + }; + + pinctrl_usb_hub: usb_hubgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts new file mode 100644 index 000000000000..5d1cc8a1f555 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + +#include "imx6ull-engicam-microgea.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull-rmm", + "engicam,microgea-imx6ull", "fsl,imx6ull"; + model = "Engicam MicroGEA i.MX6ULL BMM Board"; + + backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <85>; + pwms = <&pwm8 0 100000 0>; + }; + + buzzer { + compatible = "pwm-beeper"; + pwms = <&pwm4 0 1000000 0>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_ext_pwr: regulator-ext-pwr { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ext_pwr>; + regulator-name = "ext-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6ull-microgea-rmm-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + status = "okay"; + }; + + led-1 { + gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + status = "okay"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + touchscreen: touchscreen@38 { + compatible ="edt,edt-ft5306"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio2>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + report-rate-hz = <6>; + /* settings valid only for Hycon touchscreen */ + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mclk>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6UL_CLK_CKO>; + assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>, + <&clks IMX6UL_CLK_CKO2_PODF>, + <&clks IMX6UL_CLK_CKO2>, + <&clks IMX6UL_CLK_CKO>; + assigned-clock-parents = <&clks IMX6UL_CLK_OSC>, + <&clks IMX6UL_CLK_CKO2_SEL>, + <&clks IMX6UL_CLK_CKO2_PODF>, + <&clks IMX6UL_CLK_CKO2>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb2_vbus>; + disable-over-current; + status = "okay"; +}; + +/* MicroSD */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_3v3>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_can: can-grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x130b0 + >; + }; + + pinctrl_mclk: mclkgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x13009 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 + >; + }; + + pinctrl_touchscreen: touchgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x17059 + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_reg_usb2: regusb2grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_reg_ext_pwr: reg-ext-pwrgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi new file mode 100644 index 000000000000..43518bf07602 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + + #include "imx6ull.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull", "fsl,imx6ull"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_phy_reset>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; +}; + +/* NAND */ +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <0>; + nand-ecc-step-size = <0>; + nand-on-flash-bbt; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_phy_reset: phy-resetgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index af4acc311572..f2cd95e992e7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -31,30 +31,6 @@ back { }; }; - reg_brcm: regulator-brcm { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_brcm_reg>; - regulator-name = "brcm_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <200000>; - }; - - reg_bt: regulator-bt { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_reg>; - enable-active-high; - gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; - regulator-name = "bt_reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - reg_peri_3p15v: regulator-peri-3p15v { compatible = "regulator-fixed"; regulator-name = "peri_3p15v_reg"; @@ -63,6 +39,14 @@ reg_peri_3p15v: regulator-peri-3p15v { regulator-always-on; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -288,6 +272,14 @@ &uart3 { assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + shutdown-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; }; &uart6 { @@ -305,14 +297,21 @@ &usbotg1 { }; &usdhc1 { + #address-cells = <1>; + #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; keep-power-in-suspend; no-1-8-v; non-removable; - vmmc-supply = <®_brcm>; + mmc-pwrseq = <&sdio_pwrseq>; status = "okay"; + + wifi@0 { + compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac"; + reg = <0>; + }; }; &usdhc3 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi index 3c6ef7bfba60..880b9a4f32b0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi @@ -399,6 +399,7 @@ gpio_ptc: gpio@40ae0000 { <&pcc3 IMX7ULP_CLK_PCTLC>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 0 20>; + ngpios = <20>; }; gpio_ptd: gpio@40af0000 { @@ -413,6 +414,7 @@ gpio_ptd: gpio@40af0000 { <&pcc3 IMX7ULP_CLK_PCTLD>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 32 12>; + ngpios = <12>; }; gpio_pte: gpio@40b00000 { @@ -427,6 +429,7 @@ gpio_pte: gpio@40b00000 { <&pcc3 IMX7ULP_CLK_PCTLE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 64 16>; + ngpios = <16>; }; gpio_ptf: gpio@40b10000 { @@ -441,6 +444,7 @@ gpio_ptf: gpio@40b10000 { <&pcc3 IMX7ULP_CLK_PCTLF>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 96 20>; + ngpios = <20>; }; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi index 41f41a786f9d..6cf405e9b082 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi @@ -481,6 +481,7 @@ pwm1: pwm@4005c000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005c000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; + #pwm-cells = <3>; assigned-clocks = <&clk LPC32XX_CLK_PWM1>; assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; @@ -490,6 +491,7 @@ pwm2: pwm@4005c004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005c004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; + #pwm-cells = <3>; assigned-clocks = <&clk LPC32XX_CLK_PWM2>; assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; diff --git a/arch/arm/boot/dts/nxp/mxs/Makefile b/arch/arm/boot/dts/nxp/mxs/Makefile index 96dd31ea19ba..d72ba702b6fa 100644 --- a/arch/arm/boot/dts/nxp/mxs/Makefile +++ b/arch/arm/boot/dts/nxp/mxs/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx23-sansa.dtb \ imx23-stmp378x_devb.dtb \ imx23-xfi3.dtb \ + imx28-amarula-rmm.dtb \ imx28-apf28.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts new file mode 100644 index 000000000000..af59211842fb --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi + */ + +/dts-v1/; + +#include "imx28.dtsi" +#include +#include + +/ { + compatible = "amarula,imx28-rmm", "fsl,imx28"; + model = "Amarula i.MX28 rmm"; + + memory@40000000 { + reg = <0x40000000 0x08000000>; + device_type = "memory"; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 4 5000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <255>; + power-supply = <®_5v>; + }; + + beeper { + compatible = "pwm-beeper"; + pwms = <&pwm 7 100000 0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led-0 { + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_fec_3v3: regulator-fec-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&fec_3v3_enable_pin>; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <300000>; + vin-supply = <®_5v>; + }; + + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_vbus_enable_pin>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_enable_pin>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&duart_pins_b { + fsl,voltage = ; +}; + +&gpmi { + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + touchscreen: touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5x06_pins &edt_ft5x06_wake_pin>; + interrupt-parent = <&gpio0>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; +}; + +&lradc { + status = "okay"; +}; + +&mac0 { + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-mode = "rmii"; + phy-supply = <®_fec_3v3>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <100>; + reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + edt_ft5x06_pins: edt-ft5x06@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY1__GPIO_0_21 /* Reset */ + MX28_PAD_GPMI_CE3N__GPIO_0_19 /* Interrupt */ + >; + fsl,drive-strength = ; + fsl,pull-up = ; + fsl,voltage = ; + }; + + edt_ft5x06_wake_pin: edt-ft5x06-wake@0 { + reg = <0>; + fsl,pinmux-ids = ; + fsl,drive-strength = ; + fsl,pull-up = ; + fsl,voltage = ; + }; + + fec_3v3_enable_pin: fec-3v3-enable@0 { + reg = <0>; + fsl,pinmux-ids = ; + fsl,drive-strength = ; + fsl,pull-up = ; + fsl,voltage = ; + }; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS1__GPIO_2_20 /* External power */ + >; + fsl,drive-strength = ; + fsl,pull-up = ; + fsl,voltage = ; + }; + + leds_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 + MX28_PAD_PWM0__GPIO_3_16 + MX28_PAD_PWM1__GPIO_3_17 + >; + fsl,drive-strength = ; + fsl,pull-up = ; + fsl,voltage = ; + }; + + usb0_vbus_enable_pin: usb0-vbus-enable@0 { + reg = <0>; + fsl,pinmux-ids = ; + fsl,drive-strength = ; + fsl,pull-up = ; + fsl,voltage = ; + }; + + usb1_vbus_enable_pin: usb1-vbus-enable@0 { + reg = <0>; + fsl,pinmux-ids = ; + fsl,drive-strength = ; + fsl,pull-up = ; + fsl,voltage = ; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a &pwm7_pins_a>; + status = "okay"; +}; + +/* microSD */ +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + broken-cd; + bus-width = <4>; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi index bbea8b77386f..ece46d0e7c7f 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi @@ -755,6 +755,16 @@ MX28_PAD_PWM4__PWM_4 fsl,pull-up = ; }; + pwm7_pins_a: pwm7@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF1_SDATA0__PWM_7 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi index 5a19da9313ae..86c360868e4b 100644 --- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi @@ -17,6 +17,7 @@ clk16m: clk16m { panel: panel { compatible = "edt,et057090dhu"; backlight = <&bl>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -142,11 +143,9 @@ &usbh1 { }; &iomuxc { - vf610-colibri { - pinctrl_can_int: can_int { - fsl,pins = < - VF610_PAD_PTB21__GPIO_43 0x22ed - >; - }; + pinctrl_can_int: can_intgrp { + fsl,pins = < + VF610_PAD_PTB21__GPIO_43 0x22ed + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi index cc1e069c44e6..98f9ee1b0030 100644 --- a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi @@ -171,180 +171,178 @@ &usbphy1 { }; &iomuxc { - vf610-colibri { - pinctrl_flexcan0: can0grp { - fsl,pins = < - VF610_PAD_PTB14__CAN0_RX 0x31F1 - VF610_PAD_PTB15__CAN0_TX 0x31F2 - >; - }; + pinctrl_flexcan0: can0grp { + fsl,pins = < + VF610_PAD_PTB14__CAN0_RX 0x31F1 + VF610_PAD_PTB15__CAN0_TX 0x31F2 + >; + }; - pinctrl_flexcan1: can1grp { - fsl,pins = < - VF610_PAD_PTB16__CAN1_RX 0x31F1 - VF610_PAD_PTB17__CAN1_TX 0x31F2 - >; - }; + pinctrl_flexcan1: can1grp { + fsl,pins = < + VF610_PAD_PTB16__CAN1_RX 0x31F1 + VF610_PAD_PTB17__CAN1_TX 0x31F2 + >; + }; - pinctrl_gpio_ext: gpio_ext { - fsl,pins = < - VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */ - VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */ - VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */ - >; - }; + pinctrl_gpio_ext: gpio_extgrp { + fsl,pins = < + VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */ + VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */ + VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */ + >; + }; - pinctrl_dcu0_1: dcu0grp_1 { - fsl,pins = < - VF610_PAD_PTE0__DCU0_HSYNC 0x1902 - VF610_PAD_PTE1__DCU0_VSYNC 0x1902 - VF610_PAD_PTE2__DCU0_PCLK 0x1902 - VF610_PAD_PTE4__DCU0_DE 0x1902 - VF610_PAD_PTE5__DCU0_R0 0x1902 - VF610_PAD_PTE6__DCU0_R1 0x1902 - VF610_PAD_PTE7__DCU0_R2 0x1902 - VF610_PAD_PTE8__DCU0_R3 0x1902 - VF610_PAD_PTE9__DCU0_R4 0x1902 - VF610_PAD_PTE10__DCU0_R5 0x1902 - VF610_PAD_PTE11__DCU0_R6 0x1902 - VF610_PAD_PTE12__DCU0_R7 0x1902 - VF610_PAD_PTE13__DCU0_G0 0x1902 - VF610_PAD_PTE14__DCU0_G1 0x1902 - VF610_PAD_PTE15__DCU0_G2 0x1902 - VF610_PAD_PTE16__DCU0_G3 0x1902 - VF610_PAD_PTE17__DCU0_G4 0x1902 - VF610_PAD_PTE18__DCU0_G5 0x1902 - VF610_PAD_PTE19__DCU0_G6 0x1902 - VF610_PAD_PTE20__DCU0_G7 0x1902 - VF610_PAD_PTE21__DCU0_B0 0x1902 - VF610_PAD_PTE22__DCU0_B1 0x1902 - VF610_PAD_PTE23__DCU0_B2 0x1902 - VF610_PAD_PTE24__DCU0_B3 0x1902 - VF610_PAD_PTE25__DCU0_B4 0x1902 - VF610_PAD_PTE26__DCU0_B5 0x1902 - VF610_PAD_PTE27__DCU0_B6 0x1902 - VF610_PAD_PTE28__DCU0_B7 0x1902 - >; - }; + pinctrl_dcu0_1: dcu01grp { + fsl,pins = < + VF610_PAD_PTE0__DCU0_HSYNC 0x1902 + VF610_PAD_PTE1__DCU0_VSYNC 0x1902 + VF610_PAD_PTE2__DCU0_PCLK 0x1902 + VF610_PAD_PTE4__DCU0_DE 0x1902 + VF610_PAD_PTE5__DCU0_R0 0x1902 + VF610_PAD_PTE6__DCU0_R1 0x1902 + VF610_PAD_PTE7__DCU0_R2 0x1902 + VF610_PAD_PTE8__DCU0_R3 0x1902 + VF610_PAD_PTE9__DCU0_R4 0x1902 + VF610_PAD_PTE10__DCU0_R5 0x1902 + VF610_PAD_PTE11__DCU0_R6 0x1902 + VF610_PAD_PTE12__DCU0_R7 0x1902 + VF610_PAD_PTE13__DCU0_G0 0x1902 + VF610_PAD_PTE14__DCU0_G1 0x1902 + VF610_PAD_PTE15__DCU0_G2 0x1902 + VF610_PAD_PTE16__DCU0_G3 0x1902 + VF610_PAD_PTE17__DCU0_G4 0x1902 + VF610_PAD_PTE18__DCU0_G5 0x1902 + VF610_PAD_PTE19__DCU0_G6 0x1902 + VF610_PAD_PTE20__DCU0_G7 0x1902 + VF610_PAD_PTE21__DCU0_B0 0x1902 + VF610_PAD_PTE22__DCU0_B1 0x1902 + VF610_PAD_PTE23__DCU0_B2 0x1902 + VF610_PAD_PTE24__DCU0_B3 0x1902 + VF610_PAD_PTE25__DCU0_B4 0x1902 + VF610_PAD_PTE26__DCU0_B5 0x1902 + VF610_PAD_PTE27__DCU0_B6 0x1902 + VF610_PAD_PTE28__DCU0_B7 0x1902 + >; + }; - pinctrl_dspi1: dspi1grp { - fsl,pins = < - VF610_PAD_PTD5__DSPI1_CS0 0x33e2 - VF610_PAD_PTD6__DSPI1_SIN 0x33e1 - VF610_PAD_PTD7__DSPI1_SOUT 0x33e2 - VF610_PAD_PTD8__DSPI1_SCK 0x33e2 - >; - }; + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x33e2 + VF610_PAD_PTD6__DSPI1_SIN 0x33e1 + VF610_PAD_PTD7__DSPI1_SOUT 0x33e2 + VF610_PAD_PTD8__DSPI1_SCK 0x33e2 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTB20__GPIO_42 0x219d - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTA6__RMII_CLKOUT 0x30d2 - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKOUT 0x30d2 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; - pinctrl_gpio_bl_on: gpio_bl_on { - fsl,pins = < - VF610_PAD_PTC0__GPIO_45 0x22ef - >; - }; + pinctrl_gpio_bl_on: gpio_bl_ongrp { + fsl,pins = < + VF610_PAD_PTC0__GPIO_45 0x22ef + >; + }; - pinctrl_i2c0: i2c0grp { - fsl,pins = < - VF610_PAD_PTB14__I2C0_SCL 0x37ff - VF610_PAD_PTB15__I2C0_SDA 0x37ff - >; - }; + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; - pinctrl_i2c0_gpio: i2c0gpiogrp { - fsl,pins = < - VF610_PAD_PTB14__GPIO_36 0x37ff - VF610_PAD_PTB15__GPIO_37 0x37ff - >; - }; + pinctrl_i2c0_gpio: i2c0gpiogrp { + fsl,pins = < + VF610_PAD_PTB14__GPIO_36 0x37ff + VF610_PAD_PTB15__GPIO_37 0x37ff + >; + }; - pinctrl_nfc: nfcgrp { - fsl,pins = < - VF610_PAD_PTD23__NF_IO7 0x28df - VF610_PAD_PTD22__NF_IO6 0x28df - VF610_PAD_PTD21__NF_IO5 0x28df - VF610_PAD_PTD20__NF_IO4 0x28df - VF610_PAD_PTD19__NF_IO3 0x28df - VF610_PAD_PTD18__NF_IO2 0x28df - VF610_PAD_PTD17__NF_IO1 0x28df - VF610_PAD_PTD16__NF_IO0 0x28df - VF610_PAD_PTB24__NF_WE_B 0x28c2 - VF610_PAD_PTB25__NF_CE0_B 0x28c2 - VF610_PAD_PTB27__NF_RE_B 0x28c2 - VF610_PAD_PTC26__NF_RB_B 0x283d - VF610_PAD_PTC27__NF_ALE 0x28c2 - VF610_PAD_PTC28__NF_CLE 0x28c2 - >; - }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1182 - VF610_PAD_PTB1__FTM0_CH1 0x1182 - >; - }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1182 + VF610_PAD_PTB1__FTM0_CH1 0x1182 + >; + }; - pinctrl_pwm1: pwm1grp { - fsl,pins = < - VF610_PAD_PTB8__FTM1_CH0 0x1182 - VF610_PAD_PTB9__FTM1_CH1 0x1182 - >; - }; + pinctrl_pwm1: pwm1grp { + fsl,pins = < + VF610_PAD_PTB8__FTM1_CH0 0x1182 + VF610_PAD_PTB9__FTM1_CH1 0x1182 + >; + }; - pinctrl_uart0: uart0grp { - fsl,pins = < - VF610_PAD_PTB10__UART0_TX 0x21a2 - VF610_PAD_PTB11__UART0_RX 0x21a1 - VF610_PAD_PTB12__UART0_RTS 0x21a2 - VF610_PAD_PTB13__UART0_CTS 0x21a1 - >; - }; + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + VF610_PAD_PTB12__UART0_RTS 0x21a2 + VF610_PAD_PTB13__UART0_CTS 0x21a1 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - VF610_PAD_PTD2__UART2_RTS 0x21a2 - VF610_PAD_PTD3__UART2_CTS 0x21a1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; - pinctrl_usbh1_reg: gpio_usb_vbus { - fsl,pins = < - VF610_PAD_PTD4__GPIO_83 0x22ed - >; - }; + pinctrl_usbh1_reg: gpio_usb_vbusgrp { + fsl,pins = < + VF610_PAD_PTD4__GPIO_83 0x22ed + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi index 8af7ed56e653..ae3403c766d6 100644 --- a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi @@ -40,30 +40,28 @@ &nfc { }; &iomuxc { - vf610-colibri { - pinctrl_touchctrl_idle: touchctrl_idle { - fsl,pins = < - VF610_PAD_PTA18__GPIO_8 0x006d - VF610_PAD_PTA19__GPIO_9 0x006c - >; - }; + pinctrl_touchctrl_idle: touchctrl_idlegrp { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x006d + VF610_PAD_PTA19__GPIO_9 0x006c + >; + }; - pinctrl_touchctrl_default: touchctrl_default { - fsl,pins = < - VF610_PAD_PTA18__ADC0_SE0 0x0040 - VF610_PAD_PTA19__ADC0_SE1 0x0040 - VF610_PAD_PTA16__ADC1_SE0 0x0040 - VF610_PAD_PTB2__ADC1_SE2 0x0040 - >; - }; + pinctrl_touchctrl_default: touchctrl_defaultgrp { + fsl,pins = < + VF610_PAD_PTA18__ADC0_SE0 0x0040 + VF610_PAD_PTA19__ADC0_SE1 0x0040 + VF610_PAD_PTA16__ADC1_SE0 0x0040 + VF610_PAD_PTB2__ADC1_SE2 0x0040 + >; + }; - pinctrl_touchctrl_gpios: touchctrl_gpios { - fsl,pins = < - VF610_PAD_PTA23__GPIO_13 0x22e9 - VF610_PAD_PTB23__GPIO_93 0x22e9 - VF610_PAD_PTA22__GPIO_12 0x22e9 - VF610_PAD_PTA11__GPIO_4 0x22e9 - >; - }; + pinctrl_touchctrl_gpios: touchctrl_gpiosgrp { + fsl,pins = < + VF610_PAD_PTA23__GPIO_13 0x22e9 + VF610_PAD_PTB23__GPIO_93 0x22e9 + VF610_PAD_PTA22__GPIO_12 0x22e9 + VF610_PAD_PTA11__GPIO_4 0x22e9 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf500.dtsi b/arch/arm/boot/dts/nxp/vf/vf500.dtsi index 0c0dd442300a..71ccdaa6f269 100644 --- a/arch/arm/boot/dts/nxp/vf/vf500.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf500.dtsi @@ -43,15 +43,13 @@ global_timer: timer@40002200 { }; }; - bus@40080000 { - pmu@40089000 { - compatible = "arm,cortex-a5-pmu"; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a5_cpu>; - reg = <0x40089000 0x1000>; - }; - }; + }; + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a5_cpu>; + interrupt-parent = <&mscm_ir>; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts index 2492fb99956c..e36c854dc297 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts @@ -458,7 +458,7 @@ VF610_PAD_PTE16__GPIO_121 0x1183 >; }; - pinctrl_gpio_spi: pinctrl-gpio-spi { + pinctrl_gpio_spi: pinctrl-gpio-spigrp { fsl,pins = < VF610_PAD_PTB18__GPIO_40 0x1183 VF610_PAD_PTD10__GPIO_89 0x1183 diff --git a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts index 703f375d7e24..f1e6344b0c69 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts @@ -47,39 +47,37 @@ &fec1 { }; &iomuxc { - vf610-cosmic { - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTB28__GPIO_98 0x219d - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts index 876c14ecceb6..e7c2f6d46ab2 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts @@ -166,131 +166,129 @@ codec: sgtl5000@a { }; &iomuxc { - vf610-twr { - pinctrl_adc0_ad5: adc0ad5grp { - fsl,pins = < - VF610_PAD_PTC30__ADC0_SE5 0xa1 - >; - }; + pinctrl_adc0_ad5: adc0ad5grp { + fsl,pins = < + VF610_PAD_PTC30__ADC0_SE5 0xa1 + >; + }; - pinctrl_dspi0: dspi0grp { - fsl,pins = < - VF610_PAD_PTB19__DSPI0_CS0 0x1182 - VF610_PAD_PTB20__DSPI0_SIN 0x1181 - VF610_PAD_PTB21__DSPI0_SOUT 0x1182 - VF610_PAD_PTB22__DSPI0_SCK 0x1182 - >; - }; + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTA7__GPIO_134 0x219d - >; - }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; - pinctrl_fec0: fec0grp { - fsl,pins = < - VF610_PAD_PTA6__RMII_CLKIN 0x30d1 - VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 - VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 - VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 - VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 - VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 - VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 - VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 - VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 - VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 - >; - }; + pinctrl_fec0: fec0grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 + VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 + >; + }; - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; - pinctrl_i2c0: i2c0grp { - fsl,pins = < - VF610_PAD_PTB14__I2C0_SCL 0x30d3 - VF610_PAD_PTB15__I2C0_SDA 0x30d3 - >; - }; + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x30d3 + VF610_PAD_PTB15__I2C0_SDA 0x30d3 + >; + }; - pinctrl_nfc: nfcgrp { - fsl,pins = < - VF610_PAD_PTD31__NF_IO15 0x28df - VF610_PAD_PTD30__NF_IO14 0x28df - VF610_PAD_PTD29__NF_IO13 0x28df - VF610_PAD_PTD28__NF_IO12 0x28df - VF610_PAD_PTD27__NF_IO11 0x28df - VF610_PAD_PTD26__NF_IO10 0x28df - VF610_PAD_PTD25__NF_IO9 0x28df - VF610_PAD_PTD24__NF_IO8 0x28df - VF610_PAD_PTD23__NF_IO7 0x28df - VF610_PAD_PTD22__NF_IO6 0x28df - VF610_PAD_PTD21__NF_IO5 0x28df - VF610_PAD_PTD20__NF_IO4 0x28df - VF610_PAD_PTD19__NF_IO3 0x28df - VF610_PAD_PTD18__NF_IO2 0x28df - VF610_PAD_PTD17__NF_IO1 0x28df - VF610_PAD_PTD16__NF_IO0 0x28df - VF610_PAD_PTB24__NF_WE_B 0x28c2 - VF610_PAD_PTB25__NF_CE0_B 0x28c2 - VF610_PAD_PTB27__NF_RE_B 0x28c2 - VF610_PAD_PTC26__NF_RB_B 0x283d - VF610_PAD_PTC27__NF_ALE 0x28c2 - VF610_PAD_PTC28__NF_CLE 0x28c2 - >; - }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD31__NF_IO15 0x28df + VF610_PAD_PTD30__NF_IO14 0x28df + VF610_PAD_PTD29__NF_IO13 0x28df + VF610_PAD_PTD28__NF_IO12 0x28df + VF610_PAD_PTD27__NF_IO11 0x28df + VF610_PAD_PTD26__NF_IO10 0x28df + VF610_PAD_PTD25__NF_IO9 0x28df + VF610_PAD_PTD24__NF_IO8 0x28df + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1582 - VF610_PAD_PTB1__FTM0_CH1 0x1582 - VF610_PAD_PTB2__FTM0_CH2 0x1582 - VF610_PAD_PTB3__FTM0_CH3 0x1582 - >; - }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + >; + }; - pinctrl_sai2: sai2grp { - fsl,pins = < - VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed - VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee - VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed - VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed - VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed - VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed - VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed - >; - }; + pinctrl_sai2: sai2grp { + fsl,pins = < + VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed + VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee + VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed + VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed + VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed + VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed + VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTB6__UART2_TX 0x21a2 - VF610_PAD_PTB7__UART2_RX 0x21a1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 7e72f860c3c5..929426c1299c 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -68,8 +68,8 @@ sff: sfp { pinctrl-0 = <&pinctrl_optical>; pinctrl-names = "default"; i2c-bus = <&i2c0>; - los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + los-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; }; supply-voltage-monitor { @@ -333,7 +333,7 @@ VF610_PAD_PTB17__I2C1_SDA 0x37ff >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 VF610_PAD_PTE3__GPIO_108 0x31c2 diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts index 4f99044837f8..79ea7cf57a4d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts @@ -311,7 +311,7 @@ gpio5: io-expander@18 { * I/O14 - OPT1_TX_DIS * I/O15 - OPT2_TX_DIS */ - gpio6: sx1503@20 { + gpio6: pinctrl@20 { compatible = "semtech,sx1503q"; pinctrl-names = "default"; @@ -429,7 +429,7 @@ ethernet-phy@0 { }; &iomuxc { - pinctr_atzb_rf_233: pinctrl-atzb-rf-233 { + pinctr_atzb_rf_233: pinctrl-atzb-rf-233grp { fsl,pins = < VF610_PAD_PTB2__GPIO_24 0x31c2 VF610_PAD_PTE27__GPIO_132 0x33e2 @@ -437,7 +437,7 @@ VF610_PAD_PTE27__GPIO_132 0x33e2 }; - pinctrl_sx1503_20: pinctrl-sx1503-20 { + pinctrl_sx1503_20: pinctrl-sx1503-20grp { fsl,pins = < VF610_PAD_PTB1__GPIO_23 0x219d >; @@ -450,7 +450,7 @@ VF610_PAD_PTA21__UART3_RX 0x21a1 >; }; - pinctrl_mdio_mux: pinctrl-mdio-mux { + pinctrl_mdio_mux: pinctrl-mdio-muxgrp { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 VF610_PAD_PTA19__GPIO_9 0x31c2 @@ -458,7 +458,7 @@ VF610_PAD_PTB3__GPIO_25 0x31c2 >; }; - pinctrl_fec0_phy_int: pinctrl-fec0-phy-int { + pinctrl_fec0_phy_int: pinctrl-fec0-phy-intgrp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index 77492eeea450..8020a644dd9d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -583,7 +583,7 @@ &i2c2 { pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - gpio9: io-expander@20 { + gpio9: pinctrl@20 { compatible = "semtech,sx1503q"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sx1503_20>; @@ -623,7 +623,6 @@ eeprom@54 { i2c-mux@70 { compatible = "nxp,pca9548"; - pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0x70>; @@ -662,7 +661,6 @@ sff4_i2c: i2c@5 { i2c-mux@71 { compatible = "nxp,pca9548"; - pinctrl-names = "default"; reg = <0x71>; #address-cells = <1>; #size-cells = <0>; @@ -747,7 +745,7 @@ VF610_PAD_PTC8__DSPI1_SCK 0x1182 >; }; - pinctrl_dspi2: dspi2gpio { + pinctrl_dspi2: dspi2gpiogrp { fsl,pins = < VF610_PAD_PTD30__GPIO_64 0x33e2 VF610_PAD_PTD29__GPIO_65 0x33e1 @@ -819,13 +817,13 @@ VF610_PAD_PTA23__I2C2_SDA 0x37ff >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTB26__GPIO_96 0x31c2 >; }; - pinctrl_mdio_mux: pinctrl-mdio-mux { + pinctrl_mdio_mux: pinctrl-mdio-muxgrp { fsl,pins = < VF610_PAD_PTE27__GPIO_132 0x31c2 VF610_PAD_PTE28__GPIO_133 0x31c2 @@ -845,7 +843,7 @@ VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 >; }; - pinctrl_sx1503_20: pinctrl-sx1503-20 { + pinctrl_sx1503_20: pinctrl-sx1503-20grp { fsl,pins = < VF610_PAD_PTD31__GPIO_63 0x219d >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 2a490464660c..423d185c971f 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -323,7 +323,7 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + pinctrl_gpio_switch0: pinctrl-gpio-switch0grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; @@ -343,7 +343,7 @@ VF610_PAD_PTB17__I2C1_SDA 0x37ff >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 078d8699e16d..d5c7f710c314 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -284,13 +284,13 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 >; }; - pinctrl_gpio_phy9: pinctrl-gpio-phy9 { + pinctrl_gpio_phy9: pinctrl-gpio-phy9grp { fsl,pins = < VF610_PAD_PTB24__GPIO_94 0x219d >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + pinctrl_gpio_switch0: pinctrl-gpio-switch0grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; @@ -310,7 +310,7 @@ VF610_PAD_PTB17__I2C1_SDA 0x37ff >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index 22c8f44390a9..344cc2b4d0ad 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -330,7 +330,7 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + pinctrl_gpio_switch0: pinctrl-gpio-switch0grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; @@ -350,7 +350,7 @@ VF610_PAD_PTB17__I2C1_SDA 0x37ff >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debuggrp { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts index 2c2db47af441..86d32f54c250 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts @@ -50,14 +50,12 @@ &uart2 { }; &iomuxc { - vf610-colibri { - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - VF610_PAD_PTD2__UART2_RTS 0x21a2 - VF610_PAD_PTD3__UART2_CTS 0x21a1 - >; - }; + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts index f7474c11aabd..454b484368cb 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts @@ -79,12 +79,10 @@ &uart3 { }; &iomuxc { - vf610-cosmic { - pinctrl_uart3: uart3grp { - fsl,pins = < - VF610_PAD_PTA20__UART3_TX 0x21a2 - VF610_PAD_PTA21__UART3_RX 0x21a1 - >; - }; + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA20__UART3_TX 0x21a2 + VF610_PAD_PTA21__UART3_RX 0x21a1 + >; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi index 597f20be82f1..124003c0be26 100644 --- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi @@ -318,6 +318,7 @@ gpio0: gpio@40049000 { interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 0 32>; + ngpios = <32>; }; gpio1: gpio@4004a000 { @@ -329,6 +330,7 @@ gpio1: gpio@4004a000 { interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 32 32>; + ngpios = <32>; }; gpio2: gpio@4004b000 { @@ -340,6 +342,7 @@ gpio2: gpio@4004b000 { interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 64 32>; + ngpios = <32>; }; gpio3: gpio@4004c000 { @@ -351,6 +354,7 @@ gpio3: gpio@4004c000 { interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 96 32>; + ngpios = <32>; }; gpio4: gpio@4004d000 { @@ -362,6 +366,7 @@ gpio4: gpio@4004d000 { interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 128 7>; + ngpios = <7>; }; anatop: anatop@40050000 { @@ -603,7 +608,7 @@ usbmisc1: usb@400b4800 { ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; - reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ftm-evt", "ftm-src", "ftm-evt-counter-en", "ftm-src-counter-en"; diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 0c1d116f6e84..e875b5d25e84 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -47,6 +47,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-samsung-hlte.dtb \ qcom-msm8974-sony-xperia-rhine-amami.dtb \ qcom-msm8974-sony-xperia-rhine-honami.dtb \ + qcom-msm8974-sony-xperia-rhine-togari.dtb \ qcom-msm8974pro-fairphone-fp2.dtb \ qcom-msm8974pro-htc-m8.dtb \ qcom-msm8974pro-oneplus-bacon.dtb \ diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 4babd0bbe5d6..203f0b69b353 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -18,7 +18,7 @@ / { cpus { #address-cells = <1>; #size-cells = <0>; - interrupts = ; + interrupts = ; cpu@0 { compatible = "qcom,krait"; @@ -96,7 +96,7 @@ cpu_crit1: trip1 { cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = ; + interrupts = ; qcom,no-pc-write; }; @@ -149,9 +149,9 @@ intc: interrupt-controller@2000000 { timer@200a000 { compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = , - , - ; + interrupts = , + , + ; reg = <0x0200a000 0x100>; clock-frequency = <27000000>; clocks = <&sleep_clk>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts index 261044fdfee8..b3127f0383cf 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -12,6 +12,7 @@ / { chassis-type = "handset"; aliases { + mmc0 = &sdhc_1; serial0 = &blsp1_uart1; serial1 = &blsp2_uart4; }; @@ -598,7 +599,7 @@ &sdhc_2 { pinctrl-0 = <&sdc2_on>; pinctrl-1 = <&sdc2_off>; - bcrmf@1 { + wifi@1 { compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; reg = <1>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts index 9f2ab5c122d0..472a45408add 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-amami.dts @@ -5,6 +5,22 @@ / { model = "Sony Xperia Z1 Compact"; compatible = "sony,xperia-amami", "qcom,msm8974"; chassis-type = "handset"; + + gpio-keys { + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + }; }; &smbb { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts index 9028f17e5c4a..c3d69641fc1d 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-honami.dts @@ -5,4 +5,20 @@ / { model = "Sony Xperia Z1"; compatible = "sony,xperia-honami", "qcom,msm8974"; chassis-type = "handset"; + + gpio-keys { + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts new file mode 100644 index 000000000000..f60f7304d35e --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine-togari.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/* Togari uses a different touchscreen compared to other rhine devices */ +/delete-node/ &touchscreen; + +/ { + model = "Sony Xperia Z Ultra"; + compatible = "sony,xperia-togari", "qcom,msm8974"; + chassis-type = "handset"; +}; + +&pm8941_l23 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi index d34659ebac22..d7322fc6a095 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi @@ -8,6 +8,8 @@ / { aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; serial0 = &blsp1_uart2; }; @@ -28,20 +30,6 @@ key-volume-down { linux,code = ; }; - key-camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - - key-camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = ; - }; - key-volume-up { label = "volume_up"; gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; @@ -98,7 +86,7 @@ &blsp1_i2c2 { status = "okay"; clock-frequency = <355000>; - synaptics@2c { + touchscreen: synaptics@2c { compatible = "syna,rmi4-i2c"; reg = <0x2c>; @@ -446,6 +434,8 @@ &sdhc_2 { }; &smbb { + usb-charge-current-limit = <1800000>; + qcom,fast-charge-safe-current = <1500000>; qcom,fast-charge-current-limit = <1500000>; qcom,dc-current-limit = <1800000>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts index 4c8edadea0ac..88ff6535477b 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts @@ -13,6 +13,7 @@ / { qcom,board-id = <8 0>; aliases { + mmc0 = &sdhc_1; serial0 = &blsp1_uart2; }; diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts index 2de047393652..3258b2e27434 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts +++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts @@ -10,6 +10,7 @@ #include #include +#include #include #include @@ -86,7 +87,66 @@ switch-8 { debounce-interval = <20>; gpios = <&pca9698 15 GPIO_ACTIVE_LOW>; }; + }; + leds { + compatible = "gpio-leds"; + + led-dbg0 { + gpios = <&pca9698 0 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_DEBUG; + function-enumerator = <0>; + }; + + led-dbg1 { + gpios = <&pca9698 1 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + }; + + led-dbg2 { + gpios = <&pca9698 2 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + }; + + led-dbg3 { + gpios = <&pca9698 3 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_DEBUG; + function-enumerator = <3>; + }; + + led-dbg4 { + gpios = <&pca9698 4 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_DEBUG; + function-enumerator = <4>; + }; + + led-dbg5 { + gpios = <&pca9698 5 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_DEBUG; + function-enumerator = <5>; + }; + + led-dbg6 { + gpios = <&pca9698 6 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_DEBUG; + function-enumerator = <6>; + }; + + led-dbg7 { + gpios = <&pca9698 7 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_DEBUG; + function-enumerator = <7>; + }; }; }; @@ -111,6 +171,10 @@ ð_miic { renesas,miic-switch-portin = ; }; +&ext_rtc_clk { + clock-frequency = <32768>; +}; + &gmac2 { status = "okay"; phy-mode = "gmii"; diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi index 80ad1fdc77a0..13a60656b044 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi @@ -73,8 +73,8 @@ rtc0: rtc@40006000 { , ; interrupt-names = "alarm", "timer", "pps"; - clocks = <&sysctrl R9A06G032_HCLK_RTC>; - clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_RTC>, <&ext_rtc_clk>; + clock-names = "hclk", "xtal"; power-domains = <&sysctrl>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/samsung/exynos3250-monk.dts b/arch/arm/boot/dts/samsung/exynos3250-monk.dts index 2de877d4ccc5..68236c7297d7 100644 --- a/arch/arm/boot/dts/samsung/exynos3250-monk.dts +++ b/arch/arm/boot/dts/samsung/exynos3250-monk.dts @@ -56,7 +56,7 @@ vemmc_reg: voltage-regulator-0 { enable-active-high; }; - i2c_max77836: i2c-gpio-0 { + i2c_max77836: i2c-8 { compatible = "i2c-gpio"; sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/samsung/exynos3250-rinato.dts b/arch/arm/boot/dts/samsung/exynos3250-rinato.dts index 88fb3e68ff02..36d2171c1ce8 100644 --- a/arch/arm/boot/dts/samsung/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/samsung/exynos3250-rinato.dts @@ -58,7 +58,7 @@ wlan_pwrseq: mshc1-pwrseq { reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; }; - i2c_max77836: i2c-gpio-0 { + i2c_max77836: i2c-8 { compatible = "i2c-gpio"; sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts index 0d8495792a70..df229fb8a16b 100644 --- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts @@ -130,7 +130,7 @@ wlan_pwrseq: sdhci3-pwrseq { reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; }; - i2c_max17042_fuel: i2c-gpio-0 { + i2c_max17042_fuel: i2c-9 { compatible = "i2c-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -154,7 +154,7 @@ battery@36 { }; }; - i2c_s5k5baf: i2c-gpio-1 { + i2c_s5k5baf: i2c-10 { compatible = "i2c-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -184,7 +184,7 @@ s5k5bafx_ep: endpoint { }; }; - i2c-gpio-2 { + i2c-11 { compatible = "i2c-gpio"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi index 70e3091062f9..12b7f252b24d 100644 --- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi @@ -123,7 +123,7 @@ led-touchkeys { color = ; }; - i2c_max77693: i2c-gpio-1 { + i2c_max77693: i2c-9 { compatible = "i2c-gpio"; sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -169,7 +169,7 @@ charger { }; }; - i2c_max77693_fuel: i2c-gpio-2 { + i2c_max77693_fuel: i2c-10 { compatible = "i2c-gpio"; sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -190,7 +190,7 @@ fuel-gauge@36 { }; }; - i2c_magnetometer: i2c-gpio-3 { + i2c_magnetometer: i2c-11 { compatible = "i2c-gpio"; sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -208,7 +208,7 @@ magnetometer@2e { }; }; - i2c_lightsensor: i2c-gpio-4 { + i2c_lightsensor: i2c-12 { compatible = "i2c-gpio"; sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -220,7 +220,7 @@ i2c_lightsensor: i2c-gpio-4 { /* WiFi model uses CM3323, 3G/LTE use CM36653 */ }; - i2c_bl: i2c-gpio-5 { + i2c_bl: i2c-13 { compatible = "i2c-gpio"; sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi index 54e1a57ae886..3248be990059 100644 --- a/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4412-galaxy-s3.dtsi @@ -53,7 +53,7 @@ ps_als_reg: voltage-regulator-11 { enable-active-high; }; - i2c_ak8975: i2c-gpio-0 { + i2c_ak8975: i2c-13 { compatible = "i2c-gpio"; sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -68,7 +68,7 @@ magnetometer@c { }; }; - i2c_cm36651: i2c-gpio-2 { + i2c_cm36651: i2c-14 { compatible = "i2c-gpio"; sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi index 3d5aace668dc..05ddddb565ee 100644 --- a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi @@ -166,7 +166,7 @@ key-ok { }; }; - i2c_max77693: i2c-gpio-1 { + i2c_max77693: i2c-9 { compatible = "i2c-gpio"; sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -246,7 +246,7 @@ charger { }; }; - i2c_max77693_fuel: i2c-gpio-3 { + i2c_max77693_fuel: i2c-10 { compatible = "i2c-gpio"; sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -267,7 +267,7 @@ fuel-gauge@36 { }; }; - i2c-gpio-4 { + i2c-11 { compatible = "i2c-gpio"; sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -286,7 +286,7 @@ touchkey@20 { }; }; - i2c-mhl { + i2c-12 { compatible = "i2c-gpio"; sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi b/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi index 28a605802733..8d52aa13b862 100644 --- a/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi @@ -140,7 +140,7 @@ battery_cell: battery-cell { constant-charge-voltage-max-microvolt = <4200000>; }; - i2c-gpio-1 { + i2c-9 { compatible = "i2c-gpio"; sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -158,7 +158,7 @@ magnetometer@c { }; }; - i2c-gpio-2 { + i2c-10 { compatible = "i2c-gpio"; sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -179,7 +179,7 @@ fuel-gauge@36 { }; }; - i2c-gpio-3 { + i2c-11 { compatible = "i2c-gpio"; sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -207,7 +207,7 @@ adc { }; }; - i2c-gpio-4 { + i2c-12 { compatible = "i2c-gpio"; sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/samsung/s5pv210-aquila.dts b/arch/arm/boot/dts/samsung/s5pv210-aquila.dts index 0f5c6cd0f3a1..e9ec2cc718e0 100644 --- a/arch/arm/boot/dts/samsung/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/samsung/s5pv210-aquila.dts @@ -62,7 +62,7 @@ bat_reg: regulator-2 { regulator-max-microvolt = <3700000>; }; - i2c_pmic: i2c-pmic { + i2c_pmic: i2c-3 { compatible = "i2c-gpio"; sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi b/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi index 153514e80c9a..0a1a35f4f7cc 100644 --- a/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/samsung/s5pv210-aries.dtsi @@ -102,7 +102,7 @@ wifi_pwrseq: wifi-pwrseq { power-off-delay-us = <500>; }; - i2c_sound: i2c-gpio-0 { + i2c_sound: i2c-3 { compatible = "i2c-gpio"; sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -150,7 +150,7 @@ wm8994: audio-codec@1a { }; }; - i2c_accel: i2c-gpio-1 { + i2c_accel: i2c-4 { compatible = "i2c-gpio"; sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -170,7 +170,7 @@ accelerometer@38 { }; }; - i2c_pmic: i2c-gpio-2 { + i2c_pmic: i2c-5 { compatible = "i2c-gpio"; sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -420,7 +420,7 @@ safe2_sreg: ESAFEOUT2 { }; }; - i2c_musb: i2c-gpio-3 { + i2c_musb: i2c-6 { compatible = "i2c-gpio"; sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -442,7 +442,7 @@ fsa9480: musb@25 { }; }; - i2c_fuel: i2c-gpio-4 { + i2c_fuel: i2c-7 { compatible = "i2c-gpio"; sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -459,7 +459,7 @@ fg: fuelgauge@36 { }; }; - i2c_touchkey: i2c-gpio-5 { + i2c_touchkey: i2c-8 { compatible = "i2c-gpio"; sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -485,7 +485,7 @@ touchkey@20 { }; }; - i2c_prox: i2c-gpio-6 { + i2c_prox: i2c-9 { compatible = "i2c-gpio"; sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -513,7 +513,7 @@ light-sensor@44 { }; }; - i2c_magnetometer: i2c-gpio-7 { + i2c_magnetometer: i2c-10 { compatible = "i2c-gpio"; sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts b/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts index 879294412381..5863a1300cc1 100644 --- a/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/samsung/s5pv210-galaxys.dts @@ -51,7 +51,7 @@ key-home { }; }; - i2c_fmradio: i2c-gpio-8 { + i2c_fmradio: i2c-11 { compatible = "i2c-gpio"; sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/samsung/s5pv210-goni.dts b/arch/arm/boot/dts/samsung/s5pv210-goni.dts index d32f42dd1bf5..079581f4dfec 100644 --- a/arch/arm/boot/dts/samsung/s5pv210-goni.dts +++ b/arch/arm/boot/dts/samsung/s5pv210-goni.dts @@ -74,7 +74,7 @@ tsp_reg: regulator-3 { enable-active-high; }; - i2c_pmic: i2c-pmic { + i2c_pmic: i2c-3 { compatible = "i2c-gpio"; sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index cc9948b9870f..66d4f96da5dd 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -72,7 +72,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-odyssey.dtb \ stm32mp157c-osd32mp1-red.dtb \ stm32mp157c-phycore-stm32mp1-3.dtb \ - stm32mp157c-ultra-fly-sbc.dtb + stm32mp157c-ultra-fly-sbc.dtb \ + stm32mp157f-dk2.dtb dtb-$(CONFIG_ARCH_U8500) += \ ste-snowball.dtb \ ste-hrefprev60-stuib.dtb \ diff --git a/arch/arm/boot/dts/st/spear1310-evb.dts b/arch/arm/boot/dts/st/spear1310-evb.dts index 089bd7db55c7..417a064db11e 100644 --- a/arch/arm/boot/dts/st/spear1310-evb.dts +++ b/arch/arm/boot/dts/st/spear1310-evb.dts @@ -159,7 +159,7 @@ button@1 { }; }; - gmac0: eth@e2000000 { + gmac0: ethernet@e2000000 { phy-mode = "gmii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/spear1310.dtsi b/arch/arm/boot/dts/st/spear1310.dtsi index ba827d60bf07..1498996be14e 100644 --- a/arch/arm/boot/dts/st/spear1310.dtsi +++ b/arch/arm/boot/dts/st/spear1310.dtsi @@ -128,7 +128,7 @@ pcie2: pcie@b4000000 { status = "disabled"; }; - gmac1: eth@5c400000 { + gmac1: ethernet@5c400000 { compatible = "st,spear600-gmac"; reg = <0x5c400000 0x8000>; interrupts = <0 95 0x4>; @@ -137,7 +137,7 @@ gmac1: eth@5c400000 { status = "disabled"; }; - gmac2: eth@5c500000 { + gmac2: ethernet@5c500000 { compatible = "st,spear600-gmac"; reg = <0x5c500000 0x8000>; interrupts = <0 96 0x4>; @@ -146,7 +146,7 @@ gmac2: eth@5c500000 { status = "disabled"; }; - gmac3: eth@5c600000 { + gmac3: ethernet@5c600000 { compatible = "st,spear600-gmac"; reg = <0x5c600000 0x8000>; interrupts = <0 97 0x4>; @@ -155,7 +155,7 @@ gmac3: eth@5c600000 { status = "disabled"; }; - gmac4: eth@5c700000 { + gmac4: ethernet@5c700000 { compatible = "st,spear600-gmac"; reg = <0x5c700000 0x8000>; interrupts = <0 98 0x4>; diff --git a/arch/arm/boot/dts/st/spear1340-evb.dts b/arch/arm/boot/dts/st/spear1340-evb.dts index d24146c3c9e8..9e7c356b1d9e 100644 --- a/arch/arm/boot/dts/st/spear1340-evb.dts +++ b/arch/arm/boot/dts/st/spear1340-evb.dts @@ -157,7 +157,7 @@ partition@1200000 { }; }; - gmac0: eth@e2000000 { + gmac0: ethernet@e2000000 { phy-mode = "rgmii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/spear13xx.dtsi b/arch/arm/boot/dts/st/spear13xx.dtsi index 76749992394d..159e941708ca 100644 --- a/arch/arm/boot/dts/st/spear13xx.dtsi +++ b/arch/arm/boot/dts/st/spear13xx.dtsi @@ -149,7 +149,7 @@ fsmc: flash@b0000000 { status = "disabled"; }; - gmac0: eth@e2000000 { + gmac0: ethernet@e2000000 { compatible = "st,spear600-gmac"; reg = <0xe2000000 0x8000>; interrupts = <0 33 0x4>, diff --git a/arch/arm/boot/dts/st/spear300-evb.dts b/arch/arm/boot/dts/st/spear300-evb.dts index 7d4e6412d558..80fae76d4610 100644 --- a/arch/arm/boot/dts/st/spear300-evb.dts +++ b/arch/arm/boot/dts/st/spear300-evb.dts @@ -69,7 +69,7 @@ fsmc: flash@94000000 { status = "okay"; }; - gmac: eth@e0800000 { + gmac: ethernet@e0800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/st/spear310-evb.dts b/arch/arm/boot/dts/st/spear310-evb.dts index 459182210825..a3449eb7e59b 100644 --- a/arch/arm/boot/dts/st/spear310-evb.dts +++ b/arch/arm/boot/dts/st/spear310-evb.dts @@ -88,7 +88,7 @@ fsmc: flash@44000000 { status = "okay"; }; - gmac: eth@e0800000 { + gmac: ethernet@e0800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/st/spear320-evb.dts b/arch/arm/boot/dts/st/spear320-evb.dts index 6ac53d993cf3..984075e60634 100644 --- a/arch/arm/boot/dts/st/spear320-evb.dts +++ b/arch/arm/boot/dts/st/spear320-evb.dts @@ -84,7 +84,7 @@ fsmc: flash@4c000000 { status = "okay"; }; - gmac: eth@e0800000 { + gmac: ethernet@e0800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/st/spear3xx.dtsi b/arch/arm/boot/dts/st/spear3xx.dtsi index f54bb80ba28a..54e87ac98164 100644 --- a/arch/arm/boot/dts/st/spear3xx.dtsi +++ b/arch/arm/boot/dts/st/spear3xx.dtsi @@ -46,7 +46,7 @@ dma@fc400000 { status = "disabled"; }; - gmac: eth@e0800000 { + gmac: ethernet@e0800000 { compatible = "snps,dwmac-3.40a"; reg = <0xe0800000 0x8000>; interrupts = <23 22>; diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi index 492bcf586361..ace9495b9b06 100644 --- a/arch/arm/boot/dts/st/stm32mp131.dtsi +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi @@ -1614,6 +1614,8 @@ ethernet1: ethernet@5800a000 { snps,axi-config = <&stmmac_axi_config_1>; snps,tso; access-controllers = <&etzpc 48>; + nvmem-cells = <ðernet_mac1_address>; + nvmem-cell-names = "mac-address"; status = "disabled"; stmmac_axi_config_1: stmmac-axi-config { diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi index e48838374f0d..49583137b597 100644 --- a/arch/arm/boot/dts/st/stm32mp133.dtsi +++ b/arch/arm/boot/dts/st/stm32mp133.dtsi @@ -93,6 +93,8 @@ ethernet2: ethernet@5800e000 { snps,axi-config = <&stmmac_axi_config_2>; snps,tso; access-controllers = <&etzpc 49>; + nvmem-cells = <ðernet_mac2_address>; + nvmem-cell-names = "mac-address"; status = "disabled"; stmmac_axi_config_2: stmmac-axi-config { diff --git a/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi b/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi index dc3b09f2f2af..98552fe45d4e 100644 --- a/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi @@ -4,11 +4,15 @@ * Author: Alexandre Torgue for STMicroelectronics. */ +#include + / { firmware { optee: optee { compatible = "linaro,optee-tz"; method = "smc"; + interrupt-parent = <&intc>; + interrupts = ; }; scmi: scmi { @@ -35,21 +39,21 @@ scmi_reguls: regulators { #size-cells = <0>; scmi_reg11: regulator@0 { - reg = <0>; + reg = ; regulator-name = "reg11"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; scmi_reg18: regulator@1 { - reg = <1>; + reg = ; regulator-name = "reg18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; scmi_usb33: regulator@2 { - reg = <2>; + reg = ; regulator-name = "usb33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi b/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi new file mode 100644 index 000000000000..89de85a2eff3 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved + * Author: Amelie Delaunay for STMicroelectronics. + */ + +#include "stm32mp15-scmi.dtsi" + +/ { + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; + + arm_wdt: watchdog { + compatible = "arm,smc-wdt"; + arm,smc-id = <0xbc000000>; + status = "disabled"; + }; + +}; + +&adc { + vdd-supply = <&scmi_vdd>; + vdda-supply = <&scmi_vdd>; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&cs42l51 { + VL-supply = <&scmi_v3v3>; + VD-supply = <&scmi_v1v8_audio>; + VA-supply = <&scmi_v1v8_audio>; + VAHP-supply = <&scmi_v1v8_audio>; +}; + +&dsi { + phy-dsi-supply = <&scmi_reg18>; + clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c1 { + hdmi-transmitter@39 { + iovcc-supply = <&scmi_v3v3_hdmi>; + cvcc12-supply = <&scmi_v1v2_hdmi>; + }; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; + status = "disabled"; +}; + +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&optee { + interrupt-parent = <&intc>; + interrupts = ; +}; + +&pwr_regulators { + vdd-supply = <&scmi_vdd>; + vdd_3v3_usbfs-supply = <&scmi_vdd_usb>; + status = "disabled"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi_reguls { + scmi_vddcore: regulator@3 { + reg = ; + regulator-name = "vddcore"; + }; + + scmi_vdd: regulator@5 { + reg = ; + regulator-name = "vdd"; + }; + + scmi_v3v3: regulator@6 { + reg = ; + regulator-name = "v3v3"; + }; + + scmi_v1v8_audio: regulator@7 { + reg = ; + regulator-name = "v1v8_audio"; + }; + + scmi_v3v3_hdmi: regulator@8 { + reg = ; + regulator-name = "v3v3_hdmi"; + }; + + scmi_vdd_usb: regulator@a { + reg = ; + regulator-name = "vdd_usb"; + }; + + scmi_vdda: regulator@b { + reg = ; + regulator-name = "vdda"; + }; + + scmi_v1v2_hdmi: regulator@c { + reg = ; + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + scmi_vbus_otg: regulator@f { + reg = ; + regulator-name = "vbus_otg"; + }; + + scmi_vbus_sw: regulator@10 { + reg = ; + regulator-name = "vbus_sw"; + }; +}; + +&sdmmc1 { + vmmc-supply = <&scmi_v3v3>; +}; + +&sdmmc3 { + vmmc-supply = <&scmi_v3v3>; +}; + +&usbh_ehci { + hub@1 { + vdd-supply = <&scmi_v3v3>; + }; +}; + +&usbphyc_port0 { + phy-supply = <&scmi_vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&scmi_vdd_usb>; +}; + +&vrefbuf { + vdda-supply = <&scmi_vdd>; +}; diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts new file mode 100644 index 000000000000..43375c4d62a3 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved + * Author: Amelie Delaunay for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xf.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" +#include "stm32mp157f-dk2-scmi.dtsi" + +/ { + model = "STMicroelectronics STM32MP157F-DK2 Discovery Board"; + compatible = "st,stm32mp157f-dk2", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>; + }; +}; + +&arm_wdt { + timeout-sec = <32>; + status = "okay"; +}; + +&cryp1 { + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + power-supply = <&scmi_v3v3>; + status = "okay"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_in { + remote-endpoint = <<dc_ep1_out>; +}; + +&dsi_out { + remote-endpoint = <&panel_in>; +}; + +&i2c1 { + touchscreen@38 { + compatible = "focaltech,ft6236"; + reg = <0x38>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiof>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + status = "okay"; + }; +}; + +/* I2C4 is managed by OP-TEE */ +&i2c4 { + status = "disabled"; + + /* i2c4 subnodes, which won't be managed by Linux */ + typec@28 { + status = "disabled"; + connector { + status = "disabled"; + }; + }; + + stpmic@33 { + status = "disabled"; + }; +}; + +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep1_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in>; + }; + }; +}; + +&rtc { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_rsvd_pins_a>; + + rtc_lsco_pins_a: rtc-lsco-0 { + pins = "out2_rmp"; + function = "lsco"; + }; +}; + +/* Wifi */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + non-removable; + cap-sdio-irq; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&scmi_v3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_lsco_pins_a>; + }; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_c>; + pinctrl-1 = <&usart2_sleep_pins_c>; + pinctrl-2 = <&usart2_idle_pins_c>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + vbat-supply = <&scmi_v3v3>; + vddio-supply = <&scmi_v3v3>; + }; +}; + +/* Since I2C4 is disabled, STUSB1600 is also disabled so there is no Type-C support */ +&usbotg_hs { + dr_mode = "peripheral"; + role-switch-default-mode = "peripheral"; + /* + * Forcing dr_mode = "peripheral"/"role-switch-default-mode = "peripheral"; + * will cause the pull-up on D+/D- to be raised as soon as the OTG is configured at runtime, + * regardless of the presence of VBUS. Notice that on self-powered devices like + * stm32mp157f-dk2, this isn't compliant with the USB standard. That's why usbotg_hs is kept + * disabled here. + */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/st/stm32mp15xf.dtsi b/arch/arm/boot/dts/st/stm32mp15xf.dtsi new file mode 100644 index 000000000000..ffa55d64bea3 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp15xf.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&etzpc { + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = ; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + access-controllers = <&etzpc 9>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi index a5511b1f0ce3..46692d8f566a 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi @@ -254,7 +254,7 @@ &i2c4 { /delete-property/dmas; /delete-property/dma-names; - stusb1600@28 { + stusb1600: typec@28 { compatible = "st,stusb1600"; reg = <0x28>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; @@ -515,6 +515,7 @@ sai2a_endpoint: endpoint { remote-endpoint = <&cs42l51_tx_endpoint>; dai-format = "i2s"; mclk-fs = <256>; + system-clock-direction-out; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile index 95c68135dd0c..1aef60eef671 100644 --- a/arch/arm/boot/dts/ti/omap/Makefile +++ b/arch/arm/boot/dts/ti/omap/Makefile @@ -93,6 +93,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-boneblue.dtb \ am335x-bonegreen.dtb \ am335x-bonegreen-wireless.dtb \ + am335x-bonegreen-eco.dtb \ am335x-chiliboard.dtb \ am335x-cm-t335.dtb \ am335x-evm.dtb \ diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi index c400b7b70d0d..ad1e60a9b6fd 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi @@ -212,7 +212,7 @@ &i2c0 { status = "okay"; clock-frequency = <400000>; - tps: tps@24 { + tps: pmic@24 { reg = <0x24>; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts index 16b567e3cb47..b4fdcf9c02b5 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-boneblack.dts @@ -35,7 +35,7 @@ &gpio0 { "P9_18 [spi0_d1]", "P9_17 [spi0_cs0]", "[mmc0_cd]", - "P8_42A [ecappwm0]", + "P9_42A [ecappwm0]", "P8_35 [lcd d12]", "P8_33 [lcd d13]", "P8_31 [lcd d14]", diff --git a/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts new file mode 100644 index 000000000000..d21118cdb6c2 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am335x-bonegreen-eco.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2025 Bootlin + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-bonegreen-common.dtsi" +#include + +/ { + model = "Seeed Studio BeagleBone Green Eco"; + compatible = "seeed,am335x-bone-green-eco", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&buck1>; + }; + }; + + sys_5v: regulator-sys-5v { + compatible = "regulator-fixed"; + regulator-name = "sys_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-always-on; + }; +}; + +&usb0 { + interrupts-extended = <&intc 18>; + interrupt-names = "mc"; +}; + +&baseboard_eeprom { + vcc-supply = <&v3v3>; +}; + +&i2c0 { + /delete-node/ pmic@24; + + tps65214: pmic@30 { + compatible = "ti,tps65214"; + reg = <0x30>; + buck1-supply = <&sys_5v>; + buck2-supply = <&sys_5v>; + buck3-supply = <&sys_5v>; + ldo1-supply = <&sys_5v>; + ldo2-supply = <&sys_5v>; + + interrupt-parent = <&intc>; + interrupts = <7>; + pinctrl-0 = <&pmic_irq_pins_default>; + + regulators { + buck1: buck1 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1298500>; + regulator-boot-on; + regulator-always-on; + }; + + buck2: buck2 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3: buck3 { + regulator-name = "vdds_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "vdd_1v8_1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "vdd_1v8_2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-id"; + phy-handle = <&dp83867_0>; + ti,dual-emac-pvid = <1>; +}; + +&mac_sw { + pinctrl-0 = <&cpsw_b_default>; + pinctrl-1 = <&cpsw_b_sleep>; +}; + +&davinci_mdio_sw { + /delete-node/ ethernet-phy@0; + + dp83867_0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&am33xx_pinmux { + cpsw_b_default: cpsw-b-default-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) + >; + }; + + cpsw_b_sleep: cpsw-b-sleep-pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(AM335X_PIN_NNMI, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts index 56929059f5af..d51cdd6e1ab4 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts @@ -167,7 +167,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; status = "okay"; - rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; rs485-rx-during-tx; rs485-rts-delay = <1 1>; @@ -178,7 +178,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; status = "okay"; - rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; rs485-rts-delay = <1 1>; linux,rs485-enabled-at-boot-time; @@ -187,7 +187,7 @@ &uart2 { &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; - rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; rs485-rx-during-tx; rs485-rts-delay = <1 1>; @@ -198,7 +198,7 @@ &uart3 { &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; - rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; rs485-rx-during-tx; rs485-rts-delay = <1 1>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts index ded19e24e666..c9ccb9de21ad 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts @@ -256,8 +256,9 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; - rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; rs485-rts-active-high; + rs485-rx-during-tx; rs485-rts-delay = <0 0>; linux,rs485-enabled-at-boot-time; diff --git a/arch/arm/boot/dts/ti/omap/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi index b709703f6c0d..711ce4c31bb1 100644 --- a/arch/arm/boot/dts/ti/omap/dra7.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi @@ -195,24 +195,22 @@ axi0: target-module@51000000 { clock-names = "fck", "phy-clk", "phy-clk-div"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51000000 0x51000000 0x3000>, - <0x20000000 0x20000000 0x10000000>; + ranges = <0x51000000 0x51000000 0x3000 + 0x0 0x20000000 0x10000000>; dma-ranges; /** * To enable PCI endpoint mode, disable the pcie1_rc * node and enable pcie1_ep mode. */ pcie1_rc: pcie@51000000 { - reg = <0x51000000 0x2000>, - <0x51002000 0x14c>, - <0x20001000 0x2000>; + reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 232 0x4>, <0 233 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>, - <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x20013000 0x13000 0 0xffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -235,10 +233,7 @@ pcie1_intc: interrupt-controller { }; pcie1_ep: pcie_ep@51000000 { - reg = <0x51000000 0x28>, - <0x51002000 0x14c>, - <0x51001000 0x28>, - <0x20001000 0x10000000>; + reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; interrupts = <0 232 0x4>; num-lanes = <1>; @@ -269,21 +264,19 @@ axi1: target-module@51800000 { reset-names = "rstctrl"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51800000 0x51800000 0x3000>, - <0x30000000 0x30000000 0x10000000>; + ranges = <0x51800000 0x51800000 0x3000 + 0x0 0x30000000 0x10000000>; dma-ranges; status = "disabled"; pcie2_rc: pcie@51800000 { - reg = <0x51800000 0x2000>, - <0x51802000 0x14c>, - <0x30001000 0x2000>; + reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 355 0x4>, <0 356 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>, - <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x30013000 0x13000 0 0xffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; diff --git a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts index 38a2da5e2c5d..c8c07c2b4acf 100644 --- a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts @@ -10,6 +10,11 @@ / { model = "Benign BV07 Netbook"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; }; &fb { diff --git a/arch/arm/boot/dts/vt8500/vt8500.dtsi b/arch/arm/boot/dts/vt8500/vt8500.dtsi index d1dd37220d41..9b87b1289792 100644 --- a/arch/arm/boot/dts/vt8500/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500/vt8500.dtsi @@ -11,20 +11,16 @@ / { compatible = "via,vt8500"; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { device_type = "cpu"; compatible = "arm,arm926ej-s"; + reg = <0x0>; }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; - }; - aliases { serial0 = &uart0; serial1 = &uart1; @@ -126,7 +122,7 @@ usb@d8007b00 { interrupts = <43>; }; - fb: fb@d8050800 { + fb: lcd-controller@d800e400 { compatible = "via,vt8500-fb"; reg = <0xd800e400 0x400>; interrupts = <12>; diff --git a/arch/arm/boot/dts/vt8500/wm8505-ref.dts b/arch/arm/boot/dts/vt8500/wm8505-ref.dts index 8ce9e2ef0a81..d4ff99c70012 100644 --- a/arch/arm/boot/dts/vt8500/wm8505-ref.dts +++ b/arch/arm/boot/dts/vt8500/wm8505-ref.dts @@ -10,6 +10,11 @@ / { model = "Wondermedia WM8505 Netbook"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; }; &fb { diff --git a/arch/arm/boot/dts/vt8500/wm8505.dtsi b/arch/arm/boot/dts/vt8500/wm8505.dtsi index 2b1819f0c541..915adbf6e1e0 100644 --- a/arch/arm/boot/dts/vt8500/wm8505.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8505.dtsi @@ -11,20 +11,16 @@ / { compatible = "wm,wm8505"; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { device_type = "cpu"; compatible = "arm,arm926ej-s"; + reg = <0x0>; }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; - }; - aliases { serial0 = &uart0; serial1 = &uart1; @@ -288,7 +284,7 @@ rtc@d8100000 { interrupts = <48>; }; - sdhc@d800a000 { + mmc@d800a000 { compatible = "wm,wm8505-sdhc"; reg = <0xd800a000 0x400>; interrupts = <20>, <21>; diff --git a/arch/arm/boot/dts/vt8500/wm8650-mid.dts b/arch/arm/boot/dts/vt8500/wm8650-mid.dts index 7977b6c1e8eb..bfc570e80073 100644 --- a/arch/arm/boot/dts/vt8500/wm8650-mid.dts +++ b/arch/arm/boot/dts/vt8500/wm8650-mid.dts @@ -10,6 +10,11 @@ / { model = "Wondermedia WM8650-MID Tablet"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; }; &fb { diff --git a/arch/arm/boot/dts/vt8500/wm8650.dtsi b/arch/arm/boot/dts/vt8500/wm8650.dtsi index 042eec78c085..82eef7504364 100644 --- a/arch/arm/boot/dts/vt8500/wm8650.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8650.dtsi @@ -11,20 +11,16 @@ / { compatible = "wm,wm8650"; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { device_type = "cpu"; compatible = "arm,arm926ej-s"; + reg = <0x0>; }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; - }; - aliases { serial0 = &uart0; serial1 = &uart1; @@ -196,7 +192,7 @@ usb@d8007b00 { interrupts = <43>; }; - sdhc@d800a000 { + mmc@d800a000 { compatible = "wm,wm8505-sdhc"; reg = <0xd800a000 0x400>; interrupts = <20>, <21>; diff --git a/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts b/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts index 136e812bc1e4..72d633bedff0 100644 --- a/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts +++ b/arch/arm/boot/dts/vt8500/wm8750-apc8750.dts @@ -11,6 +11,11 @@ / { model = "VIA APC8750"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; }; &pinctrl { diff --git a/arch/arm/boot/dts/vt8500/wm8750.dtsi b/arch/arm/boot/dts/vt8500/wm8750.dtsi index 56342aa1d993..5342b7fe4ef8 100644 --- a/arch/arm/boot/dts/vt8500/wm8750.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8750.dtsi @@ -11,20 +11,16 @@ / { compatible = "wm,wm8750"; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { device_type = "cpu"; compatible = "arm,arm1176jzf"; + reg = <0x0>; }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; - }; - aliases { serial0 = &uart0; serial1 = &uart1; @@ -328,7 +324,7 @@ rtc@d8100000 { interrupts = <48>; }; - sdhc@d800a000 { + mmc@d800a000 { compatible = "wm,wm8505-sdhc"; reg = <0xd800a000 0x1000>; interrupts = <20 21>; diff --git a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts index 5d409323b10c..eb16991a2ccc 100644 --- a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts @@ -22,6 +22,11 @@ backlight { brightness-levels = <0 40 60 80 100 130 190 255>; default-brightness-level = <5>; }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; }; &fb { diff --git a/arch/arm/boot/dts/vt8500/wm8850.dtsi b/arch/arm/boot/dts/vt8500/wm8850.dtsi index 03e72f28d31b..58109aa05f74 100644 --- a/arch/arm/boot/dts/vt8500/wm8850.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8850.dtsi @@ -18,14 +18,10 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x0>; + next-level-cache = <&l2_cache>; }; }; - memory { - device_type = "memory"; - reg = <0x0 0x0>; - }; - aliases { serial0 = &uart0; serial1 = &uart1; @@ -299,7 +295,7 @@ rtc@d8100000 { interrupts = <48>; }; - sdhc@d800a000 { + mmc@d800a000 { compatible = "wm,wm8505-sdhc"; reg = <0xd800a000 0x1000>; interrupts = <20 21>; @@ -313,5 +309,18 @@ ethernet@d8004000 { reg = <0xd8004000 0x100>; interrupts = <10>; }; + + l2_cache: cache-controller@d9000000 { + compatible = "arm,pl310-cache"; + reg = <0xd9000000 0x1000>; + arm,double-linefill = <1>; + arm,dynamic-clock-gating = <1>; + arm,shared-override; + arm,standby-mode = <1>; + cache-level = <2>; + cache-unified; + prefetch-data = <1>; + prefetch-instr = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts index 99d2c4f1fc5a..dae9968a4ff6 100644 --- a/arch/arm64/boot/dts/airoha/en7581-evb.dts +++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts @@ -98,3 +98,11 @@ &pcie1 { &i2c0 { status = "okay"; }; + +ð { + status = "okay"; +}; + +&gdm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi index 536ece69b935..ff6908a76e8e 100644 --- a/arch/arm64/boot/dts/airoha/en7581.dtsi +++ b/arch/arm64/boot/dts/airoha/en7581.dtsi @@ -346,5 +346,54 @@ i2c1: i2c@1fbf8100 { status = "disabled"; }; + + eth: ethernet@1fb50000 { + compatible = "airoha,en7581-eth"; + reg = <0 0x1fb50000 0 0x2600>, + <0 0x1fb54000 0 0x2000>, + <0 0x1fb56000 0 0x2000>; + reg-names = "fe", "qdma0", "qdma1"; + + resets = <&scuclk EN7581_FE_RST>, + <&scuclk EN7581_FE_PDMA_RST>, + <&scuclk EN7581_FE_QDMA_RST>, + <&scuclk EN7581_XSI_MAC_RST>, + <&scuclk EN7581_DUAL_HSI0_MAC_RST>, + <&scuclk EN7581_DUAL_HSI1_MAC_RST>, + <&scuclk EN7581_HSI_MAC_RST>, + <&scuclk EN7581_XFP_MAC_RST>; + reset-names = "fe", "pdma", "qdma", + "xsi-mac", "hsi0-mac", "hsi1-mac", + "hsi-mac", "xfp-mac"; + + interrupts = , + , + , + , + , + , + , + , + , + ; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + gdm1: ethernet@1 { + compatible = "airoha,eth-mac"; + reg = <1>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <10000>; + full-duplex; + pause; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 773cc02a13d0..780aeba0f3a4 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-orangepi-4a.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi index bd366389b238..bb5f9e4f3d42 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -236,6 +236,21 @@ mmc2_pins: mmc2-pins { bias-pull-up; }; + rgmii0_pins: rgmii0-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH9", "PH10", + "PH14", "PH15", "PH16", "PH17", "PH18"; + function = "emac0"; + drive-strength = <40>; + }; + + rmii0_pins: rmii0-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH9", "PH10"; + function = "emac0"; + drive-strength = <40>; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; function = "uart0"; @@ -405,6 +420,26 @@ i2c3: i2c@5002c00 { #size-cells = <0>; }; + emac0: ethernet@5020000 { + compatible = "allwinner,sun50i-a100-emac", + "allwinner,sun50i-a64-emac"; + reg = <0x5020000 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + syscon = <&syscon>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + ths: thermal-sensor@5070400 { compatible = "allwinner,sun50i-a100-ths"; reg = <0x05070400 0x100>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts index fe77178d3e33..90a50910f07b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a133-liontron-h-a133l.dts @@ -65,6 +65,25 @@ &ehci1 { status = "okay"; }; +&emac0 { + pinctrl-names = "default"; + pinctrl-0 = <&rmii0_pins>; + phy-handle = <&rmii_phy>; + phy-mode = "rmii"; + status = "okay"; +}; + +&mdio0 { + reset-gpios = <&pio 7 12 GPIO_ACTIVE_LOW>; /* PH12 */ + reset-delay-us = <2000>; + reset-post-delay-us = <2000>; + + rmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi index 51cd148f4227..6b6f2296bdff 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi @@ -7,6 +7,8 @@ #include #include #include +#include +#include / { interrupt-parent = <&gic>; @@ -106,6 +108,21 @@ soc { #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + gpu: gpu@1800000 { + compatible = "allwinner,sun55i-a523-mali", + "arm,mali-valhall-jm"; + reg = <0x1800000 0x10000>; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; + clock-names = "core", "bus"; + power-domains = <&pck600 PD_GPU>; + resets = <&ccu RST_BUS_GPU>; + status = "disabled"; + }; + pio: pinctrl@2000000 { compatible = "allwinner,sun55i-a523-pinctrl"; reg = <0x2000000 0x800>; @@ -126,16 +143,6 @@ pio: pinctrl@2000000 { interrupt-controller; #interrupt-cells = <3>; - rgmii0_pins: rgmii0-pins { - pins = "PH0", "PH1", "PH2", "PH3", "PH4", - "PH5", "PH6", "PH7", "PH9", "PH10", - "PH14", "PH15", "PH16", "PH17", "PH18"; - allwinner,pinmux = <5>; - function = "gmac0"; - drive-strength = <40>; - bias-disable; - }; - mmc0_pins: mmc0-pins { pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5"; allwinner,pinmux = <2>; @@ -163,11 +170,35 @@ mmc2_pins: mmc2-pins { bias-pull-up; }; + rgmii0_pins: rgmii0-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH9", "PH10", + "PH14", "PH15", "PH16", "PH17", "PH18"; + allwinner,pinmux = <5>; + function = "gmac0"; + drive-strength = <40>; + bias-disable; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; allwinner,pinmux = <2>; function = "uart0"; }; + + /omit-if-no-ref/ + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + allwinner,pinmux = <2>; + }; + + /omit-if-no-ref/ + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + allwinner,pinmux = <2>; + }; }; ccu: clock-controller@2001000 { @@ -181,69 +212,6 @@ ccu: clock-controller@2001000 { #reset-cells = <1>; }; - mmc0: mmc@4020000 { - compatible = "allwinner,sun55i-a523-mmc", - "allwinner,sun20i-d1-mmc"; - reg = <0x04020000 0x1000>; - clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC0>; - reset-names = "ahb"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - status = "disabled"; - - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@4021000 { - compatible = "allwinner,sun55i-a523-mmc", - "allwinner,sun20i-d1-mmc"; - reg = <0x04021000 0x1000>; - clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC1>; - reset-names = "ahb"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - status = "disabled"; - - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@4022000 { - compatible = "allwinner,sun55i-a523-mmc", - "allwinner,sun20i-d1-mmc"; - reg = <0x04022000 0x1000>; - clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; - clock-names = "ahb", "mmc"; - resets = <&ccu RST_BUS_MMC2>; - reset-names = "ahb"; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - status = "disabled"; - - max-frequency = <150000000>; - cap-sd-highspeed; - cap-mmc-highspeed; - cap-sdio-irq; - #address-cells = <1>; - #size-cells = <0>; - }; - wdt: watchdog@2050000 { compatible = "allwinner,sun55i-a523-wdt"; reg = <0x2050000 0x20>; @@ -428,6 +396,14 @@ syscon: syscon@3000000 { ranges; }; + sid: efuse@3006000 { + compatible = "allwinner,sun55i-a523-sid", + "allwinner,sun50i-a64-sid"; + reg = <0x03006000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + gic: interrupt-controller@3400000 { compatible = "arm,gic-v3"; #address-cells = <1>; @@ -449,6 +425,69 @@ its: msi-controller@3440000 { }; }; + mmc0: mmc@4020000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04020000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04021000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun55i-a523-mmc", + "allwinner,sun20i-d1-mmc"; + reg = <0x04022000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + status = "disabled"; + + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + usb_otg: usb@4100000 { compatible = "allwinner,sun55i-a523-musb", "allwinner,sun8i-a33-musb"; @@ -562,6 +601,14 @@ mdio0: mdio { }; }; + ppu: power-controller@7001400 { + compatible = "allwinner,sun55i-a523-ppu"; + reg = <0x07001400 0x400>; + clocks = <&r_ccu CLK_BUS_R_PPU1>; + resets = <&r_ccu RST_BUS_R_PPU1>; + #power-domain-cells = <1>; + }; + r_ccu: clock-controller@7010000 { compatible = "allwinner,sun55i-a523-r-ccu"; reg = <0x7010000 0x250>; @@ -608,6 +655,14 @@ r_i2c_pins: r-i2c-pins { }; }; + pck600: power-controller@7060000 { + compatible = "allwinner,sun55i-a523-pck-600"; + reg = <0x07060000 0x8000>; + clocks = <&r_ccu CLK_BUS_R_PPU0>; + resets = <&r_ccu RST_BUS_R_PPU0>; + #power-domain-cells = <1>; + }; + r_i2c0: i2c@7081400 { compatible = "allwinner,sun55i-a523-i2c", "allwinner,sun8i-v536-i2c", diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts index 8bc0f2c72a24..553ad774ed13 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts @@ -66,6 +66,11 @@ &gmac0 { status = "okay"; }; +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + &mdio0 { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts index 59db103546f6..a96927fbdadd 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-h728-x96qpro+.dts @@ -54,6 +54,11 @@ &ehci1 { status = "okay"; }; +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts index 142177c1f737..b9eeb6753e9e 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts @@ -76,6 +76,11 @@ &gmac0 { status = "okay"; }; +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + &mdio0 { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts new file mode 100644 index 000000000000..d07bb9193b43 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Copyright (C) 2025 Chen-Yu Tsai + */ + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include +#include + +/ { + model = "OrangePi 4A"; + compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + leds { + compatible = "gpio-leds"; + + /* PWM capable pin, but PWM isn't supported yet. */ + led { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ + }; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */ + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_vcc5v>; + gpio = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + enable-active-high; + }; + + reg_pcie_vcc3v3: regulator-pcie-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-pcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-active-high; + }; + + reg_usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_vcc5v>; + gpio = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */ + enable-active-high; + }; + + reg_vcc5v: regulator-vcc5v { + /* board wide 5V supply from USB type-C port */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_cldo3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + vmmc-supply = <®_dldo1_323>; + vqmmc-supply = <®_bldo1>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + bus-width = <8>; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <®_cldo3>; + vqmmc-supply = <®_cldo1>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_cldo3>; /* via VCC-IO */ + vcc-pc-supply = <®_cldo1>; + vcc-pd-supply = <®_cldo3>; + vcc-pe-supply = <®_aldo2>; + vcc-pf-supply = <®_cldo3>; /* VCC-IO for 3.3v; VCC-MCSI for 1.8v */ + vcc-pg-supply = <®_bldo1>; + vcc-ph-supply = <®_cldo3>; /* via VCC-IO */ + vcc-pi-supply = <®_cldo3>; + vcc-pj-supply = <®_cldo1>; + vcc-pk-supply = <®_cldo1>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@35 { + compatible = "x-powers,axp717"; + reg = <0x35>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts-extended = <&nmi_intc 0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + vin4-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + /* Supplies the "little" cluster (1.4 GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1160000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vcc-dram"; + }; + + reg_dcdc4: dcdc4 { + /* feeds 3.3V pin on GPIO header */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vdd-io"; + }; + + aldo1 { + /* not actually connected */ + regulator-name = "avdd-csi"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_aldo3: aldo3 { + /* supplies the I2C pins for this PMIC */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-usb"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pg-wifi"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-lpddr"; + }; + + bldo3 { + /* not actually connected */ + regulator-name = "afvcc-csi"; + }; + + bldo4 { + /* not actually connected */ + regulator-name = "dvdd-csi"; + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-cvp-pc-lvds-mcsi-pk-efuse-pcie-edp-1v8"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3-csi"; + }; + + reg_cldo3: cldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-mmc-nand-pd-pi-usb"; + }; + + reg_cldo4: cldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-phy1-lcd"; + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus-usb-0v9"; + }; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + status = "okay"; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + reg_aldo1_323: aldo1 { + /* less capable and shares load with dldo1 */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo1_323: dldo1 { + /* more capable and shares load with aldo1 */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi2"; + }; + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1150000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + /* Some RISC-V management core related voltage */ + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-dnr"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <®_aldo3>; + */ + vcc-pm-supply = <®_bldo2>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "lpo"; + vbat-supply = <®_aldo1_323>; + vddio-supply = <®_bldo1>; + device-wakeup-gpios = <&r_pio 1 3 GPIO_ACTIVE_HIGH>; /* PM3 */ + host-wakeup-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + shutdown-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + }; +}; + +&usb_otg { + /* + * The OTG controller is connected to one of the type-A ports. + * There is a regulator, controlled by a GPIO, to provide VBUS power + * to the port, and a VBUSDET GPIO, to detect externally provided + * power. But without ID or CC pins there is no real way to do a + * runtime role detection. + */ + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_otg_vbus>; + usb0_vbus_det-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + usb1_vbus-supply = <®_usb_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 0def0b0daaf7..effd242f6bf7 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -130,16 +130,19 @@ clocks { cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-frequency = <150000000>; }; cb_intosc_ls_clk: cb-intosc-ls-clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-frequency = <300000000>; }; f2s_free_clk: f2s-free-clk { #clock-cells = <0>; compatible = "fixed-clock"; + status = "disabled"; }; osc1: osc1 { @@ -395,7 +398,7 @@ pinctrl1: pinctrl@ffd13100 { rst: rstmgr@ffd11000 { #reset-cells = <1>; - compatible = "altr,stratix10-rst-mgr"; + compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr"; reg = <0xffd11000 0x1000>; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts index 34ccf8138f7b..ad52e8a0b9ba 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts @@ -68,7 +68,6 @@ &gmac0 { &gmac1 { status = "okay"; phy-mode = "rgmii"; - phy-addr = <0xffffffff>; }; &gmac2 { @@ -103,12 +102,7 @@ &usb1 { status = "okay"; }; -&rst { - altr,modrst-offset = <0x20>; -}; - &sysmgr { reg = <0xffd12000 0x1000>; interrupts = <0x0 0x10 0x4>; - cpu1-start-addr = <0xffd06230>; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 15e7901c1268..619dce79b020 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi index a8c90245c42a..5f602f1170c0 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include / { cpus { #address-cells = <2>; @@ -92,6 +93,102 @@ uart_b: serial@7a000 { clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,pinctrl-s6"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>; + + gpioz: gpio@c0 { + reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>; + }; + + gpiox: gpio@100 { + reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>; + }; + + gpioh: gpio@140 { + reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 9>; + }; + + gpiod: gpio@180 { + reg = <0 0x180 0 0x20>, <0 0x8 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 7>; + }; + + gpiof: gpio@1a0 { + reg = <0 0x1a0 0 0x20>, <0 0x20 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_F<<8) 5>; + }; + + gpioe: gpio@1c0 { + reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 3>; + }; + + gpioc: gpio@200 { + reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>; + }; + + gpiob: gpio@240 { + reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>; + }; + + gpioa: gpio@280 { + reg = <0 0x280 0 0x20>, <0 0x40 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_A<<8) 16>; + }; + + test_n: gpio@2c0 { + reg = <0 0x2c0 0 0x20>; + reg-names = "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = + <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>; + }; + + gpiocc: gpio@300 { + reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi index f0c172681bd1..260918b37b9a 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include / { cpus { @@ -94,6 +95,86 @@ uart_b: serial@7a000 { clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,pinctrl-s7"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>; + + gpioz: gpio@c0 { + reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>; + }; + + gpiox: gpio@100 { + reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>; + }; + + gpioh: gpio@140 { + reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>; + }; + + gpiod: gpio@180 { + reg = <0 0x180 0 0x20>, <0 0x40 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 12>; + }; + + gpioe: gpio@1c0 { + reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>; + }; + + gpioc: gpio@200 { + reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>; + }; + + gpiob: gpio@240 { + reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>; + }; + + test_n: gpio@2c0 { + reg = <0 0x2c0 0 0x20>; + reg-names = "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = + <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>; + }; + + gpiocc: gpio@300 { + reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi index e1099bc1535d..c4d260d5bb58 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include / { cpus { @@ -94,6 +95,95 @@ uart_b: serial@7a000 { clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,pinctrl-s7d", + "amlogic,pinctrl-s7"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x340>; + + gpioz: gpio@c0 { + reg = <0 0xc0 0 0x20>, <0 0x18 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 13>; + }; + + gpiox: gpio@100 { + reg = <0 0x100 0 0x30>, <0 0xc 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>; + }; + + gpioh: gpio@140 { + reg = <0 0x140 0 0x20>, <0 0x2c 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 12>; + }; + + gpiod: gpio@180 { + reg = <0 0x180 0 0x20>, <0 0x40 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 5>; + }; + + gpioe: gpio@1c0 { + reg = <0 0x1c0 0 0x20>, <0 0x48 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>; + }; + + gpioc: gpio@200 { + reg = <0 0x200 0 0x20>, <0 0x24 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 8>; + }; + + gpiob: gpio@240 { + reg = <0 0x240 0 0x20>, <0 0x0 0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>; + }; + + gpiodv: gpio@280 { + reg = <0 0x280 0 0x20>, <0 0x8 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_DV<<8) 7>; + }; + + test_n: gpio@2c0 { + reg = <0 0x2c0 0 0x20>; + reg-names = "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = + <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>; + }; + + gpiocc: gpio@300 { + reg = <0 0x300 0 0x20>, <0 0x14 0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts index 124a80901084..9fd68195be3f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts @@ -39,3 +39,7 @@ &usb { phy-names = "usb2-phy0", "usb2-phy1"; }; */ + +&npu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts index 415248931ab1..82546b738977 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts @@ -111,3 +111,7 @@ &cpu103 { &pwm_ab { pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>; }; + +&npu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 6da1316d97c6..b4f88ed6273b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -97,7 +97,7 @@ sdio_pwrseq: sdio-pwrseq { clock-names = "ext_clock"; }; - cvbs-connector { + cvbs_connector: cvbs-connector { compatible = "composite-video-connector"; port { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index ecaf678b23dd..9d5a481b309f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -217,7 +217,7 @@ &sd_emmc_a { vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - brcmf: brcmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts new file mode 100644 index 000000000000..ba871f3f53bb --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-ugoos-am3.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 J. Neuschäfer + * + * Debug UART (3.3V, 115200 baud) at the corner of the board: + * (4) (3) (2) [1] + * Vcc RXD TXD GND + */ + +/dts-v1/; + +#include +#include + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "ugoos,am3", "amlogic,s912", "amlogic,meson-gxm"; + model = "Ugoos AM3"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; +}; + +&cvbs_connector { + /* Not used on this board */ + status = "disabled"; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <2>; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; + + status = "okay"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c_B { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_b_pins>; + + rtc: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +/* WLAN: Atheros 10k (QCA9377) */ +&sd_emmc_a { + max-frequency = <200000000>; +}; + +/* eMMC */ +&sd_emmc_c { + max-frequency = <100000000>; +}; diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi index 89c3b211b116..0ad77c98073f 100644 --- a/arch/arm64/boot/dts/apple/t6000.dtsi +++ b/arch/arm64/boot/dts/apple/t6000.dtsi @@ -16,3 +16,7 @@ / { }; /delete-node/ &pmgr_south; + +&gpu { + compatible = "apple,agx-g13s"; +}; diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi index d2cf81926f28..ffbe823b71bc 100644 --- a/arch/arm64/boot/dts/apple/t6001.dtsi +++ b/arch/arm64/boot/dts/apple/t6001.dtsi @@ -62,3 +62,7 @@ p-core-pmu-affinity { }; }; }; + +&gpu { + compatible = "apple,agx-g13c", "apple,agx-g13s"; +}; diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi index e36f422d257d..8fb648836b53 100644 --- a/arch/arm64/boot/dts/apple/t6002.dtsi +++ b/arch/arm64/boot/dts/apple/t6002.dtsi @@ -300,3 +300,7 @@ &ps_gfx { // On t6002, the die0 GPU power domain needs both AFR power domains power-domains = <&ps_afr>, <&ps_afr_die1>; }; + +&gpu { + compatible = "apple,agx-g13d", "apple,agx-g13s"; +}; diff --git a/arch/arm64/boot/dts/apple/t600x-common.dtsi b/arch/arm64/boot/dts/apple/t600x-common.dtsi index 87dfc13d7417..e20234ef2135 100644 --- a/arch/arm64/boot/dts/apple/t600x-common.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-common.dtsi @@ -11,6 +11,10 @@ / { #address-cells = <2>; #size-cells = <2>; + aliases { + gpu = &gpu; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -378,4 +382,34 @@ nco_clkref: clock-ref-nco { #clock-cells = <0>; clock-output-names = "nco_ref"; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpu_globals: globals { + status = "disabled"; + }; + + gpu_hw_cal_a: hw-cal-a { + status = "disabled"; + }; + + gpu_hw_cal_b: hw-cal-b { + status = "disabled"; + }; + + uat_handoff: uat-handoff { + status = "disabled"; + }; + + uat_pagetables: uat-pagetables { + status = "disabled"; + }; + + uat_ttbs: uat-ttbs { + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi index 110bc6719512..1563b3ce1ff6 100644 --- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi @@ -72,12 +72,12 @@ boot_stage: boot-stage@6001 { reg = <0x6001 0x1>; }; - boot_error_count: boot-error-count@6002 { + boot_error_count: boot-error-count@6002,0 { reg = <0x6002 0x1>; bits = <0 4>; }; - panic_count: panic-count@6002 { + panic_count: panic-count@6002,4 { reg = <0x6002 0x1>; bits = <4 4>; }; @@ -86,7 +86,7 @@ boot_error_stage: boot-error-stage@6003 { reg = <0x6003 0x1>; }; - shutdown_flag: shutdown-flag@600f { + shutdown_flag: shutdown-flag@600f,3 { reg = <0x600f 0x1>; bits = <3 1>; }; @@ -302,6 +302,34 @@ mca: mca@39b600000 { #sound-dai-cells = <1>; }; + gpu: gpu@406400000 { + compatible = "apple,agx-g13s"; + reg = <0x4 0x6400000 0 0x40000>, + <0x4 0x4000000 0 0x1000000>; + reg-names = "asc", "sgx"; + mboxes = <&agx_mbox>; + power-domains = <&ps_gfx>; + memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>, + <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>; + memory-region-names = "ttbs", "pagetables", "handoff", + "hw-cal-a", "hw-cal-b", "globals"; + + apple,firmware-abi = <0 0 0>; + }; + + agx_mbox: mbox@406408000 { + compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x4 0x6408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = , + , + , + ; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; + pcie0_dart_0: iommu@581008000 { compatible = "apple,t6000-dart"; reg = <0x5 0x81008000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/apple/t8012-j132.dts b/arch/arm64/boot/dts/apple/t8012-j132.dts index 778a69be18dd..7dcac51703ff 100644 --- a/arch/arm64/boot/dts/apple/t8012-j132.dts +++ b/arch/arm64/boot/dts/apple/t8012-j132.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "t8012-jxxx.dtsi" +#include "t8012-touchbar.dtsi" / { model = "Apple T2 MacBookPro15,2 (j132)"; diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi index 3a204845b85b..589ddc039799 100644 --- a/arch/arm64/boot/dts/apple/t8103.dtsi +++ b/arch/arm64/boot/dts/apple/t8103.dtsi @@ -19,6 +19,10 @@ / { #address-cells = <2>; #size-cells = <2>; + aliases { + gpu = &gpu; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -351,6 +355,36 @@ nco_clkref: clock-ref-nco { clock-output-names = "nco_ref"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpu_globals: globals { + status = "disabled"; + }; + + gpu_hw_cal_a: hw-cal-a { + status = "disabled"; + }; + + gpu_hw_cal_b: hw-cal-b { + status = "disabled"; + }; + + uat_handoff: uat-handoff { + status = "disabled"; + }; + + uat_pagetables: uat-pagetables { + status = "disabled"; + }; + + uat_ttbs: uat-ttbs { + status = "disabled"; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -359,6 +393,34 @@ soc { ranges; nonposted-mmio; + gpu: gpu@206400000 { + compatible = "apple,agx-g13g"; + reg = <0x2 0x6400000 0 0x40000>, + <0x2 0x4000000 0 0x1000000>; + reg-names = "asc", "sgx"; + mboxes = <&agx_mbox>; + power-domains = <&ps_gfx>; + memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>, + <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>; + memory-region-names = "ttbs", "pagetables", "handoff", + "hw-cal-a", "hw-cal-b", "globals"; + + apple,firmware-abi = <0 0 0>; + }; + + agx_mbox: mbox@206408000 { + compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x2 0x6408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = , + , + , + ; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; + cpufreq_e: performance-controller@210e20000 { compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq"; reg = <0x2 0x10e20000 0 0x1000>; @@ -759,12 +821,12 @@ boot_stage: boot-stage@9f01 { reg = <0x9f01 0x1>; }; - boot_error_count: boot-error-count@9f02 { + boot_error_count: boot-error-count@9f02,0 { reg = <0x9f02 0x1>; bits = <0 4>; }; - panic_count: panic-count@9f02 { + panic_count: panic-count@9f02,4 { reg = <0x9f02 0x1>; bits = <4 4>; }; @@ -773,7 +835,7 @@ boot_error_stage: boot-error-stage@9f03 { reg = <0x9f03 0x1>; }; - shutdown_flag: shutdown-flag@9f0f { + shutdown_flag: shutdown-flag@9f0f,3 { reg = <0x9f0f 0x1>; bits = <3 1>; }; diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi index f68354194355..b36b345861b6 100644 --- a/arch/arm64/boot/dts/apple/t8112.dtsi +++ b/arch/arm64/boot/dts/apple/t8112.dtsi @@ -19,6 +19,10 @@ / { #address-cells = <2>; #size-cells = <2>; + aliases { + gpu = &gpu; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -366,6 +370,36 @@ nco_clkref: clock-ref-nco { clock-output-names = "nco_ref"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpu_globals: globals { + status = "disabled"; + }; + + gpu_hw_cal_a: hw-cal-a { + status = "disabled"; + }; + + gpu_hw_cal_b: hw-cal-b { + status = "disabled"; + }; + + uat_handoff: uat-handoff { + status = "disabled"; + }; + + uat_pagetables: uat-pagetables { + status = "disabled"; + }; + + uat_ttbs: uat-ttbs { + status = "disabled"; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -374,6 +408,34 @@ soc { ranges; nonposted-mmio; + gpu: gpu@206400000 { + compatible = "apple,agx-g14g"; + reg = <0x2 0x6400000 0 0x40000>, + <0x2 0x4000000 0 0x1000000>; + reg-names = "asc", "sgx"; + mboxes = <&agx_mbox>; + power-domains = <&ps_gfx>; + memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>, + <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>; + memory-region-names = "ttbs", "pagetables", "handoff", + "hw-cal-a", "hw-cal-b", "globals"; + + apple,firmware-abi = <0 0 0>; + }; + + agx_mbox: mbox@206408000 { + compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x2 0x6408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = , + , + , + ; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; + cpufreq_e: cpufreq@210e20000 { compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq"; reg = <0x2 0x10e20000 0 0x1000>; @@ -807,12 +869,12 @@ boot_stage: boot-stage@f701 { reg = <0xf701 0x1>; }; - boot_error_count: boot-error-count@f702 { + boot_error_count: boot-error-count@f702,0 { reg = <0xf702 0x1>; bits = <0 4>; }; - panic_count: panic-count@f702 { + panic_count: panic-count@f702,4 { reg = <0xf702 0x1>; bits = <4 4>; }; @@ -821,7 +883,7 @@ boot_error_stage: boot-error-stage@f703 { reg = <0xf703 0x1>; }; - shutdown_flag: shutdown-flag@f70f { + shutdown_flag: shutdown-flag@f70f,3 { reg = <0xf70f 0x1>; bits = <3 1>; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 01ecfa304184..83d45afc6588 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -7,13 +7,15 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ bcm2712-rpi-5-b.dtb \ + bcm2712-rpi-5-b-ovl-rp1.dtb \ bcm2712-d-rpi-5-b.dtb \ bcm2837-rpi-2-b.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ - bcm2837-rpi-zero-2-w.dtb + bcm2837-rpi-zero-2-w.dtb \ + rp1.dtbo subdir-y += bcmbca subdir-y += northstar2 diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts new file mode 100644 index 000000000000..6ea3c102e0d6 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include +#include "bcm2712.dtsi" + +/ { + compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; + model = "Raspberry Pi 5"; + + aliases { + serial10 = &uart10; + }; + + chosen: chosen { + stdout-path = "serial10:115200n8"; + }; + + clk_rp1_xosc: clock-50000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "rp1-xosc"; + clock-frequency = <50000000>; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0 0x28000000>; + }; + + sd_io_1v8_reg: sd-io-1v8-reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; + states = <1800000 1>, + <3300000 0>; + }; + + sd_vcc_reg: sd-vcc-reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector + * labeled "UART", i.e. the interface with the system console. + */ +&uart10 { + status = "okay"; +}; + +/* SDIO1 is used to drive the SD card */ +&sdio1 { + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; +}; + +&soc { + firmware: firmware { + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + + mboxes = <&mailbox>; + dma-ranges; + + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; + }; + + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; +}; + +&hvs { + clocks = <&firmware_clocks 4>, <&firmware_clocks 16>; + clock-names = "core", "disp"; +}; + +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts index 34470e3d7171..a70a9b158df3 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -1,108 +1,19 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make + * the RP1 driver to load the RP1 dtb overlay at runtime, while + * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it + * already contains RP1 node, so no overlay is loaded nor needed). + * This file is not intended to be modified, nodes should be added + * to the included bcm2712-rpi-5-b-ovl-rp1.dts. + */ + /dts-v1/; -#include -#include "bcm2712.dtsi" +#include "bcm2712-rpi-5-b-ovl-rp1.dts" -/ { - compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; - model = "Raspberry Pi 5"; - - aliases { - serial10 = &uart10; - }; - - chosen: chosen { - stdout-path = "serial10:115200n8"; - }; - - /* Will be filled by the bootloader */ - memory@0 { - device_type = "memory"; - reg = <0 0 0 0x28000000>; - }; - - sd_io_1v8_reg: sd-io-1v8-reg { - compatible = "regulator-gpio"; - regulator-name = "vdd-sd-io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - regulator-settling-time-us = <5000>; - gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; - states = <1800000 1>, - <3300000 0>; - }; - - sd_vcc_reg: sd-vcc-reg { - compatible = "regulator-fixed"; - regulator-name = "vcc-sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; - }; -}; - -/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector - * labeled "UART", i.e. the interface with the system console. - */ -&uart10 { - status = "okay"; -}; - -/* SDIO1 is used to drive the SD card */ -&sdio1 { - vqmmc-supply = <&sd_io_1v8_reg>; - vmmc-supply = <&sd_vcc_reg>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-ddr50; - sd-uhs-sdr104; -}; - -&soc { - firmware: firmware { - compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - - mboxes = <&mailbox>; - dma-ranges; - - firmware_clocks: clocks { - compatible = "raspberrypi,firmware-clocks"; - #clock-cells = <1>; - }; - - reset: reset { - compatible = "raspberrypi,firmware-reset"; - #reset-cells = <1>; - }; - }; - - power: power { - compatible = "raspberrypi,bcm2835-power"; - firmware = <&firmware>; - #power-domain-cells = <1>; - }; -}; - -&hvs { - clocks = <&firmware_clocks 4>, <&firmware_clocks 16>; - clock-names = "core", "disp"; -}; - -&hdmi0 { - clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; - clock-names = "hdmi", "bvb", "audio", "cec"; -}; - -&hdmi1 { - clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; - clock-names = "hdmi", "bvb", "audio", "cec"; +&pcie2 { + #include "rp1-nexus.dtsi" }; &pcie1 { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi index 613ba7ee43d6..3b7595fd4e81 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -323,11 +323,12 @@ pmb: power-controller@2800c0 { }; }; + /* PERF Peripherals */ bus@ff800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x00 0x00 0xff800000 0x3000>; + ranges = <0x00 0x00 0xff800000 0x400000>; twd: timer-mfd@400 { compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; @@ -348,13 +349,103 @@ watchdog@28 { }; }; - gpio0: gpio-controller@500 { + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x528 0x04>; reg-names = "dirout", "dat"; - reg = <0x500 0x28>, <0x528 0x28>; - - #gpio-cells = <2>; gpio-controller; + #gpio-cells = <2>; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x540 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x544 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 256 .. 287 */ + gpio8: gpio@520 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x520 0x04>, <0x548 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 288 .. 319 */ + gpio9: gpio@524 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x524 0x04>, <0x54c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; }; pinctrl@560 { @@ -584,6 +675,12 @@ leds: leds@800 { #size-cells = <0>; }; + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = ; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -636,6 +733,19 @@ reset-controller@2644 { #reset-cells = <1>; }; }; + + pl081_dma: dma-controller@59000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x59000 0x1000>; + interrupts = ; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; }; reboot { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi index 48d618e75866..a441388c0cd2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2022 Broadcom Ltd. + * This DTSI is for the B0 and later revision of the SoC */ #include @@ -125,6 +126,101 @@ bus@ff800000 { #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + + leds: led-controller@800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = ; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -151,6 +247,21 @@ nandcs: nand@0 { }; }; + /* B0 AHB Peripherals */ + pl081_dma: dma-controller@11000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x11000 0x1000>; + interrupts = ; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; + + /* B0 ARM UART Peripheral block */ uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; @@ -159,5 +270,23 @@ uart0: serial@12000 { clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; + + uart1: serial@13000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x13000 0x1000>; + interrupts = ; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@14000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x14000 0x1000>; + interrupts = ; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi index 00c62c1e5df0..dcbd0fdd33d2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi @@ -93,11 +93,103 @@ gic: interrupt-controller@1000 { }; }; + /* PERF Peripherals */ bus@ff800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x800000>; + ranges = <0x0 0x0 0xff800000 0x400000>; + + watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x10>; + }; + + watchdog@4c0 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x4c0 0x10>; + status = "disabled"; + }; + + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; uart0: serial@640 { compatible = "brcm,bcm6345-uart"; @@ -108,6 +200,29 @@ uart0: serial@640 { status = "disabled"; }; + uart1: serial@660 { + compatible = "brcm,bcm6345-uart"; + reg = <0x660 0x18>; + interrupts = ; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + + leds: led-controller@800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = ; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -133,5 +248,18 @@ nandcs: nand@0 { reg = <0>; }; }; + + pl081_dma: dma-controller@59000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x59000 0x1000>; + interrupts = ; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi index caeaf428dc15..c105a734a648 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi @@ -111,11 +111,12 @@ gic: interrupt-controller@1000 { }; }; + /* PERF Peripherals */ bus@ff800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x62000>; + ranges = <0x0 0x0 0xff800000 0x400000>; twd: timer-mfd@400 { compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; @@ -136,6 +137,86 @@ watchdog@28 { }; }; + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + uart0: serial@640 { compatible = "brcm,bcm6345-uart"; reg = <0x640 0x18>; @@ -145,6 +226,29 @@ uart0: serial@640 { status = "disabled"; }; + uart1: serial@660 { + compatible = "brcm,bcm6345-uart"; + reg = <0x660 0x18>; + interrupts = ; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + + leds: led-controller@800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-leds"; + reg = <0x800 0xdc>; + status = "disabled"; + }; + + rng@b80 { + compatible = "brcm,iproc-rng200"; + reg = <0xb80 0x28>; + interrupts = ; + }; + hsspi: spi@1000 { #address-cells = <1>; #size-cells = <0>; @@ -170,5 +274,18 @@ nandcs: nand@0 { reg = <0>; }; }; + + pl081_dma: dma-controller@59000 { + compatible = "arm,pl081", "arm,primecell"; + // The magic B105F00D info is missing + arm,primecell-periphid = <0x00041081>; + reg = <0x59000 0x1000>; + interrupts = ; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + clocks = <&periph_clk>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 5a4b81faff20..9888a1fabd5c 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -367,7 +367,6 @@ gic: interrupt-controller@65210000 { v2m0: v2m@0 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x00000 0x1000>; arm,msi-base-spi = <72>; @@ -376,7 +375,6 @@ v2m0: v2m@0 { v2m1: v2m@10000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x10000 0x1000>; arm,msi-base-spi = <88>; @@ -385,7 +383,6 @@ v2m1: v2m@10000 { v2m2: v2m@20000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x20000 0x1000>; arm,msi-base-spi = <104>; @@ -394,7 +391,6 @@ v2m2: v2m@20000 { v2m3: v2m@30000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x30000 0x1000>; arm,msi-base-spi = <120>; @@ -403,7 +399,6 @@ v2m3: v2m@30000 { v2m4: v2m@40000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x40000 0x1000>; arm,msi-base-spi = <136>; @@ -412,7 +407,6 @@ v2m4: v2m@40000 { v2m5: v2m@50000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x50000 0x1000>; arm,msi-base-spi = <152>; @@ -421,7 +415,6 @@ v2m5: v2m@50000 { v2m6: v2m@60000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x60000 0x1000>; arm,msi-base-spi = <168>; @@ -430,7 +423,6 @@ v2m6: v2m@60000 { v2m7: v2m@70000 { compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; msi-controller; reg = <0x70000 0x1000>; arm,msi-base-spi = <184>; diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi new file mode 100644 index 000000000000..5002a375eb0b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include +#include +#include + +pci_ep_bus: pci-ep-bus@1 { + compatible = "simple-bus"; + ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>; + dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>; + #address-cells = <2>; + #size-cells = <2>; + + rp1_clocks: clocks@40018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0x00 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>, + <&rp1_clocks RP1_PLL_SYS>, + <&rp1_clocks RP1_PLL_SYS_SEC>, + <&rp1_clocks RP1_CLK_SYS>; + assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE + <200000000>, // RP1_PLL_SYS + <125000000>, // RP1_PLL_SYS_SEC + <200000000>; // RP1_CLK_SYS + }; + + rp1_gpio: pinctrl@400d0000 { + compatible = "raspberrypi,rp1-gpio"; + reg = <0x00 0x400d0000 0x0 0xc000>, + <0x00 0x400e0000 0x0 0xc000>, + <0x00 0x400f0000 0x0 0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>, + <2 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi new file mode 100644 index 000000000000..0ef30d7f1c35 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +rp1_nexus { + compatible = "pci1de4,1"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01 0x00 0x00000000 + 0x02000000 0x00 0x00000000 + 0x0 0x400000>; + interrupt-controller; + #interrupt-cells = <2>; + + #include "rp1-common.dtsi" +}; diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso new file mode 100644 index 000000000000..ab4f146d22c0 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/rp1.dtso @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +/plugin/; + +&pcie2 { + #address-cells = <3>; + #size-cells = <2>; + + #include "rp1-nexus.dtsi" +}; diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi index 6dfe78a7d4ab..966fb57280f3 100644 --- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi @@ -136,8 +136,8 @@ uart0: serial@402020000 { reg = <0x04 0x02020000 0x0 0x1000>; interrupt-parent = <&gic>; interrupts = ; - clocks = <&clk125mhz>; - clock-names = "apb_pclk"; + clocks = <&clk125mhz>, <&clk125mhz>; + clock-names = "uartclk", "apb_pclk"; }; }; diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index 89c90564c3d8..bdb9e9813e50 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -2,6 +2,7 @@ subdir-y += google dtb-$(CONFIG_ARCH_EXYNOS) += \ + exynos2200-g0s.dtb \ exynos5433-tm2.dtb \ exynos5433-tm2e.dtb \ exynos7-espresso.dtb \ diff --git a/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts new file mode 100644 index 000000000000..0e348c5cf7df --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos2200-g0s.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Samsung Galaxy S22+ (g0s/SM-S906B) device tree source + * + * Copyright (c) 2025, Ivaylo Ivanov + */ + +/dts-v1/; +#include "exynos2200.dtsi" +#include +#include +#include + +/ { + model = "Samsung Galaxy S22+ (SM-S906B)"; + compatible = "samsung,g0s", "samsung,exynos2200"; + chassis-type = "handset"; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer { + compatible = "simple-framebuffer"; + memory-region = <&cont_splash_mem>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + /* + * RTC clock (XrtcXTI); external, must be 32.768 kHz. + * + * TODO: Remove this once RTC clock is implemented properly as part of + * PMIC driver. + */ + rtcclk: clock-rtcclk { + compatible = "fixed-clock"; + clock-output-names = "rtcclk"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&key_volup>; + pinctrl-names = "default"; + + volup-key { + label = "Volume Up"; + linux,code = ; + gpios = <&gpa3 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>, + <0x8 0x80000000 0x1 0x7e000000>; + }; + + /* TODO: Remove this once PMIC is implemented */ + reg_dummy: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "dummy_reg"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cont_splash_mem: framebuffer@f6200000 { + reg = <0x0 0xf6200000 0x0 (1080 * 2340 * 4)>; + no-map; + }; + + debug_kinfo_reserved: debug-kinfo-reserved@fcfff000 { + reg = <0x0 0xfcfff000 0x0 0x1000>; + no-map; + }; + + log_itmon: log-itmon@fffe0000 { + reg = <0x0 0xfffe0000 0x0 0x20000>; + no-map; + }; + }; +}; + +&cmu_hsi0 { + clocks = <&xtcxo>, + <&rtcclk>, + <&cmu_top CLK_DOUT_CMU_HSI0_NOC>, + <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>, + <&cmu_top CLK_DOUT_CMU_HSI0_DPOSC>, + <&cmu_top CLK_DOUT_CMU_HSI0_USB32DRD>; + clock-names = "oscclk", "rtcclk", "noc", "dpgtc", "dposc", "usb"; +}; + +/* + * cpu2 and cpu3 fail to come up consistently, which leads to a hang later + * in the boot process. Disable them until the issue is figured out. + */ +&cpu2 { + status = "fail"; +}; + +&cpu3 { + status = "fail"; +}; + +&ext_26m { + clock-frequency = <26000000>; +}; + +&ext_200m { + clock-frequency = <200000000>; +}; + +&mct_peris { + status = "okay"; +}; + +&pinctrl_alive { + key_volup: key-volup-pins { + samsung,pins = "gpa3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; +}; + +&ppi_cluster0 { + affinity = <&cpu0 &cpu1>; +}; + +&usb { + /* TODO: Replace these once PMIC is implemented */ + vdd10-supply = <®_dummy>; + vdd33-supply = <®_dummy>; + status = "okay"; +}; + +&usb32drd { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "peripheral"; + maximum-speed = "high-speed"; +}; + +&usb_hsphy { + /* TODO: Replace these once PMIC is implemented */ + vdda12-supply = <®_dummy>; + vdd-supply = <®_dummy>; + status = "okay"; +}; + +&xtcxo { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi new file mode 100644 index 000000000000..f618ff290604 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi @@ -0,0 +1,1765 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Samsung's Exynos 2200 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2025, Ivaylo Ivanov + */ + +#include +#include "exynos-pinctrl.h" + +&pinctrl_alive { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa2: gpa2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa3: gpa3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa4: gpa4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpq0: gpq0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; + + gpq1: gpq1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; + + gpq2: gpq2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + }; + + bt_hostwake: bt-hostwake-pins { + samsung,pins = "gpa0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart1_bus: uart1-bus-pins { + samsung,pins = "gpq0-3", "gpq0-2", "gpq0-1", "gpq0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + wlan_host_wake: wlan-host-wake-pins { + samsung,pins = "gpa0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_cmgp { + gpm0: gpm0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm1: gpm1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm2: gpm2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm3: gpm3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm4: gpm4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm5: gpm5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm6: gpm6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm7: gpm7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm8: gpm8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm9: gpm9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm10: gpm10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm11: gpm11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm12: gpm12-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + ; + }; + + gpm13: gpm13-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + ; + }; + + gpm14: gpm14-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm15: gpm15-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm16: gpm16-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm17: gpm17-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm20: gpm20-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm21: gpm21-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm22: gpm22-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm23: gpm23-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm24: gpm24-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + hsi2c24_bus: hsi2c24-bus-pins { + samsung,pins = "gpm0-0", "gpm0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c25_bus: hsi2c25-bus-pins { + samsung,pins = "gpm1-0", "gpm1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c26_bus: hsi2c26-bus-pins { + samsung,pins = "gpm2-0", "gpm2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c27_bus: hsi2c27-bus-pins { + samsung,pins = "gpm3-0", "gpm3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c28_bus: hsi2c28-bus-pins { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c29_bus: hsi2c29-bus-pins { + samsung,pins = "gpm5-0", "gpm5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c30_bus: hsi2c30-bus-pins { + samsung,pins = "gpm6-0", "gpm6-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c31_bus: hsi2c31-bus-pins { + samsung,pins = "gpm7-0", "gpm7-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c32_bus: hsi2c32-bus-pins { + samsung,pins = "gpm8-0", "gpm8-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c33_bus: hsi2c33-bus-pins { + samsung,pins = "gpm9-0", "gpm9-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c34_bus: hsi2c34-bus-pins { + samsung,pins = "gpm10-0", "gpm10-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c35_bus: hsi2c35-bus-pins { + samsung,pins = "gpm11-0", "gpm11-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c36_bus: hsi2c36-bus-pins { + samsung,pins = "gpm12-0", "gpm12-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c37_bus: hsi2c37-bus-pins { + samsung,pins = "gpm13-0", "gpm13-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c38_bus: hsi2c38-bus-pins { + samsung,pins = "gpm23-0", "gpm24-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi12_bus: spi12-bus-pins { + samsung,pins = "gpm0-0", "gpm0-1", "gpm1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi12_cs: spi12-cs-pins { + samsung,pins = "gpm1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi12_cs_func: spi12-cs-func-pins { + samsung,pins = "gpm1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi13_bus: spi13-bus-pins { + samsung,pins = "gpm2-0", "gpm2-1", "gpm3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi13_cs: spi13-cs-pins { + samsung,pins = "gpm3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi13_cs_func: spi13-cs-func-pins { + samsung,pins = "gpm3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi14_bus: spi14-bus-pins { + samsung,pins = "gpm4-0", "gpm4-1", "gpm5-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi14_cs: spi14-cs-pins { + samsung,pins = "gpm5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi14_cs_func: spi14-cs-func-pins { + samsung,pins = "gpm5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi15_bus: spi15-bus-pins { + samsung,pins = "gpm6-0", "gpm6-1", "gpm7-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi15_cs: spi15-cs-pins { + samsung,pins = "gpm7-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi15_cs_func: spi15-cs-func-pins { + samsung,pins = "gpm7-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi16_bus: spi16-bus-pins { + samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi16_cs: spi16-cs-pins { + samsung,pins = "gpm9-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi16_cs_func: spi16-cs-func-pins { + samsung,pins = "gpm9-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi17_bus: spi17-bus-pins { + samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi17_cs: spi17-cs-pins { + samsung,pins = "gpm11-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi17_cs_func: spi17-cs-func-pins { + samsung,pins = "gpm11-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi18_bus: spi18-bus-pins { + samsung,pins = "gpm12-0", "gpm12-1", "gpm13-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi18_cs: spi18-cs-pins { + samsung,pins = "gpm13-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi18_cs_func: spi18-cs-func-pins { + samsung,pins = "gpm13-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + uart14_bus_single: uart14-bus-single-pins { + samsung,pins = "gpm0-0", "gpm0-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart14_bus_dual: uart14-bus-dual-pins { + samsung,pins = "gpm0-0", "gpm0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart15_bus_single: uart15-bus-single-pins { + samsung,pins = "gpm3-0", "gpm3-1", "gpm4-0", "gpm4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart15_bus_dual: uart15-bus-dual-pins { + samsung,pins = "gpm3-0", "gpm3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart16_bus_single: uart16-bus-single-pins { + samsung,pins = "gpm5-0", "gpm5-1", "gpm6-0", "gpm6-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart16_bus_dual: uart16-bus-dual-pins { + samsung,pins = "gpm5-0", "gpm5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart17_bus_single: uart17-bus-single-pins { + samsung,pins = "gpm7-0", "gpm7-1", "gpm8-0", "gpm8-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart17_bus_dual: uart17-bus-dual-pins { + samsung,pins = "gpm7-0", "gpm7-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart18_bus_single: uart18-bus-single-pins { + samsung,pins = "gpm8-0", "gpm8-1", "gpm9-0", "gpm9-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart18_bus_dual: uart18-bus-dual-pins { + samsung,pins = "gpm8-0", "gpm8-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart19_bus_single: uart19-bus-single-pins { + samsung,pins = "gpm10-0", "gpm10-1", "gpm11-0", "gpm11-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart19_bus_dual: uart19-bus-dual-pins { + samsung,pins = "gpm12-0", "gpm12-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart20_bus_single: uart20-bus-single-pins { + samsung,pins = "gpm13-0", "gpm13-1", "gpm14-0", "gpm14-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart20_bus_dual: uart20-bus-dual-pins { + samsung,pins = "gpm13-0", "gpm13-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + +}; + +&pinctrl_hsi1 { + gpf0: gpf0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie0_clkreq: pcie0-clkreq-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + pcie0_perst: pcie0-perst-pins { + samsung,pins = "gpf0-1"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; + + pcie1_clkreq: pcie1-clkreq-pins { + samsung,pins = "gpf0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + pcie1_perst: pcie1-perst-pins { + samsung,pins = "gpf0-3"; + samsung,pin-function = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + }; +}; + +&pinctrl_hsi1ufs { + gpf2: gpf2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gpf2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + samsung,pin-drv = ; + samsung,pin-pud-pdn = ; + }; +}; + +&pinctrl_peric0 { + gpb0: gpb0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + aud_i2s0_bus: aud-i2s0-bus-pins { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s1_bus: aud-i2s1-bus-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s2_bus: aud-i2s2-bus-pins { + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s3_bus: aud-i2s3-bus-pins { + samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s3_pci: aud-i2s3-pci-pins { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_dsd_bus: aud-dsd-bus-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + decon_0_te: decon-0-te-pins { + samsung,pins = "gpg2-0"; + samsung,pin-function = ; + }; + + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp4-2", "gpp4-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c0_bus: i3c0-bus-pins { + samsung,pins = "gpc0-0", "gpc0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c1_bus: i3c1-bus-pins { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c2_bus: i3c2-bus-pins { + samsung,pins = "gpc2-0", "gpc2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + uart6_bus_single: uart6-bus-single-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart6_bus_dual: uart6-bus-dual-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_peric1 { + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp9: gpp9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp10: gpp10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp7-0", "gpp7-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c15_bus: hsi2c15-bus-pins { + samsung,pins = "gpp7-2", "gpp7-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c16_bus: hsi2c16-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c17_bus: hsi2c17-bus-pins { + samsung,pins = "gpp8-2", "gpp8-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c18_bus: hsi2c18-bus-pins { + samsung,pins = "gpp9-0", "gpp9-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c19_bus: hsi2c19-bus-pins { + samsung,pins = "gpp9-2", "gpp9-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c20_bus: hsi2c20-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c21_bus: hsi2c21-bus-pins { + samsung,pins = "gpp10-2", "gpp10-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp7-2", "gpp7-1", "gpp7-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp7-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp7-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp8-2", "gpp8-1", "gpp8-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp9-2", "gpp9-1", "gpp9-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp9-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp9-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi10_bus: spi10-bus-pins { + samsung,pins = "gpp10-2", "gpp10-1", "gpp10-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp10-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp10-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + uart9_bus_single: uart9-bus-single-pins { + samsung,pins = "gpp7-3", "gpp7-2", "gpp7-1", "gpp7-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart9_bus_dual: uart9-bus-dual-pins { + samsung,pins = "gpp7-0", "gpp7-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart10_bus_single: uart10-bus-single-pins { + samsung,pins = "gpp8-3", "gpp8-2", "gpp8-1", "gpp8-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart10_bus_dual: uart10-bus-dual-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart11_bus_single: uart11-bus-single-pins { + samsung,pins = "gpp9-3", "gpp9-2", "gpp9-1", "gpp9-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart11_bus_dual: uart11-bus-dual-pins { + samsung,pins = "gpp9-0", "gpp9-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart12_bus_single: uart12-bus-single-pins { + samsung,pins = "gpp10-3", "gpp10-2", "gpp10-1", "gpp10-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart12_bus_dual: uart12-bus-dual-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + +}; + +&pinctrl_peric2 { + gpc3: gpc3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc5: gpc5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc6: gpc6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc7: gpc7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc8: gpc8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc9: gpc9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp11: gpp11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp2-2", "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp5-2", "gpp5-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp6-2", "gpp6-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi2c22_bus: hsi2c22-bus-pins { + samsung,pins = "gpp11-0", "gpp11-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c3_bus: i3c3-bus-pins { + samsung,pins = "gpc3-0", "gpc3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c4_bus: i3c4-bus-pins { + samsung,pins = "gpc4-0", "gpc4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c5_bus: i3c5-bus-pins { + samsung,pins = "gpc5-0", "gpc5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + i3c6_bus: i3c6-bus-pins { + samsung,pins = "gpc6-0", "gpc6-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c7_bus: i3c7-bus-pins { + samsung,pins = "gpc7-0", "gpc7-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c8_bus: i3c8-bus-pins { + samsung,pins = "gpc8-0", "gpc8-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c9_bus: i3c9-bus-pins { + samsung,pins = "gpc9-0", "gpc9-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + i3c10_bus: i3c10-bus-pins { + samsung,pins = "gpp2-2", "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + i3c11_bus: i3c11-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + hsi223_bus: hsi2c23-bus-pins { + samsung,pins = "gpp11-2", "gpp11-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi5_cs: spi5-cs-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp6-2", "gpp6-1", "gpp6-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi11_bus: spi11-bus-pins { + samsung,pins = "gpp11-2", "gpp11-1", "gpp11-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp11-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp11-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + uart0_bus_single: uart0-bus-single-pins { + samsung,pins = "gpg0-2", "gpg0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart2_bus_single: uart2-bus-single-pins { + samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart2_bus_dual: uart2-bus-dual-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart3_bus_single: uart3-bus-single-pins { + samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart3_bus_dual: uart3-bus-dual-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart4_bus_single: uart4-bus-single-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart4_bus_dual: uart4-bus-dual-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart5_bus_single: uart5-bus-single-pins { + samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart5_bus_dual: uart5-bus-dual-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart7_bus_single: uart7-bus-single-pins { + samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart7_bus_dual: uart7-bus-dual-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart8_bus_single: uart8-bus-single-pins { + samsung,pins = "gpp6-3", "gpp6-2", "gpp6-1", "gpp6-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart8_bus_dual: uart8-bus-dual-pins { + samsung,pins = "gpp6-0", "gpp6-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart13_bus_single: uart13-bus-single-pins { + samsung,pins = "gpp11-3", "gpp11-2", "gpp11-1", "gpp11-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + uart13_bus_dual: uart13-bus-dual-pins { + samsung,pins = "gpp11-0", "gpp11-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_ufs { + gpf1: gpf1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_vts { + gpv0: gpv0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + amic_pdm0_bus: amic-pdm0-bus-pins { + samsung,pins = "gpv0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + amic_pdm1_bus: amic-pdm1-bus-pins { + samsung,pins = "gpv0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + amic_pdm2_bus: amic-pdm2-bus-pins { + samsung,pins = "gpv0-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + dmic_bus_clk0: dmic-bus-clk0-pins { + samsung,pins = "gpv0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + dmic_bus_clk1: dmic-bus-clk1-pins { + samsung,pins = "gpv0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + dmic_bus_clk2: dmic-bus-clk2-pins { + samsung,pins = "gpv0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + dmic_pdm0_bus: dmic-pdm0-bus-pins { + samsung,pins = "gpv0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + dmic_pdm1_bus: dmic-pdm1-bus-pins { + samsung,pins = "gpv0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; + + dmic_pdm2_bus: dmic-pdm2-bus-pins { + samsung,pins = "gpv0-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi new file mode 100644 index 000000000000..6b5ac02d010f --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi @@ -0,0 +1,561 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Samsung's Exynos 2200 SoC device tree source + * + * Copyright (c) 2025, Ivaylo Ivanov + */ + +#include +#include + +/ { + compatible = "samsung,exynos2200"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_cmgp; + pinctrl2 = &pinctrl_hsi1; + pinctrl3 = &pinctrl_ufs; + pinctrl4 = &pinctrl_hsi1ufs; + pinctrl5 = &pinctrl_peric0; + pinctrl6 = &pinctrl_peric1; + pinctrl7 = &pinctrl_peric2; + pinctrl8 = &pinctrl_vts; + }; + + xtcxo: clock-1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "oscclk"; + }; + + ext_26m: clock-2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ext-26m"; + }; + + ext_200m: clock-3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ext-200m"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0>; + capacity-dmips-mhz = <260>; + dynamic-power-coefficient = <189>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0x100>; + capacity-dmips-mhz = <260>; + dynamic-power-coefficient = <189>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0x200>; + capacity-dmips-mhz = <260>; + dynamic-power-coefficient = <189>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a510"; + reg = <0x300>; + capacity-dmips-mhz = <260>; + dynamic-power-coefficient = <189>; + enable-method = "psci"; + cpu-idle-states = <&little_cpu_sleep>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a710"; + reg = <0x400>; + capacity-dmips-mhz = <380>; + dynamic-power-coefficient = <560>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a710"; + reg = <0x500>; + capacity-dmips-mhz = <380>; + dynamic-power-coefficient = <560>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a710"; + reg = <0x600>; + capacity-dmips-mhz = <380>; + dynamic-power-coefficient = <560>; + enable-method = "psci"; + cpu-idle-states = <&big_cpu_sleep>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x2"; + reg = <0x700>; + capacity-dmips-mhz = <488>; + dynamic-power-coefficient = <765>; + enable-method = "psci"; + cpu-idle-states = <&prime_cpu_sleep>; + }; + + idle-states { + entry-method = "psci"; + + little_cpu_sleep: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "c2"; + entry-latency-us = <70>; + exit-latency-us = <170>; + min-residency-us = <2000>; + arm,psci-suspend-param = <0x10000>; + }; + + big_cpu_sleep: cpu-sleep-1 { + compatible = "arm,idle-state"; + idle-state-name = "c2"; + entry-latency-us = <235>; + exit-latency-us = <220>; + min-residency-us = <3500>; + arm,psci-suspend-param = <0x10000>; + }; + + prime_cpu_sleep: cpu-sleep-2 { + compatible = "arm,idle-state"; + idle-state-name = "c2"; + entry-latency-us = <150>; + exit-latency-us = <190>; + min-residency-us = <2500>; + arm,psci-suspend-param = <0x10000>; + }; + }; + }; + + pmu-a510 { + compatible = "arm,cortex-a510-pmu"; + interrupts = ; + }; + + pmu-a710 { + compatible = "arm,cortex-a710-pmu"; + interrupts = ; + }; + + pmu-x2 { + compatible = "arm,cortex-x2-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + ranges; + + #address-cells = <2>; + #size-cells = <2>; + + chipid@10000000 { + compatible = "samsung,exynos2200-chipid", + "samsung,exynos850-chipid"; + reg = <0x0 0x10000000 0x0 0x24>; + }; + + cmu_peris: clock-controller@10020000 { + compatible = "samsung,exynos2200-cmu-peris"; + reg = <0x0 0x10020000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, + <&cmu_top CLK_DOUT_CMU_PERIS_NOC>, + <&cmu_top CLK_DOUT_CMU_PERIS_GIC>; + clock-names = "tcxo_div3", + "noc", + "gic"; + }; + + mct_peris: timer@10040000 { + compatible = "samsung,exynos2200-mct-peris", + "samsung,exynos4210-mct"; + reg = <0x0 0x10040000 0x0 0x800>; + clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, <&cmu_peris CLK_MOUT_PERIS_GIC>; + clock-names = "fin_pll", "mct"; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + status = "disabled"; + }; + + gic: interrupt-controller@10200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x10200000 0x0 0x10000>, /* GICD */ + <0x0 0x10240000 0x0 0x200000>; /* GICR * 8 */ + + #interrupt-cells = <4>; + interrupt-controller; + interrupts = ; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6>; + }; + + ppi_cluster2: interrupt-partition-2 { + affinity = <&cpu7>; + }; + }; + }; + + cmu_peric0: clock-controller@10400000 { + compatible = "samsung,exynos2200-cmu-peric0"; + reg = <0x0 0x10400000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_PERIC0_NOC>, + <&cmu_top CLK_DOUT_CMU_PERIC0_IP0>, + <&cmu_top CLK_DOUT_CMU_PERIC0_IP1>; + clock-names = "oscclk", "noc", "ip0", "ip1"; + }; + + syscon_peric0: syscon@10420000 { + compatible = "samsung,exynos2200-peric0-sysreg", "syscon"; + reg = <0x0 0x10420000 0x0 0x2000>; + }; + + pinctrl_peric0: pinctrl@10430000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x10430000 0x0 0x1000>; + }; + + cmu_peric1: clock-controller@10700000 { + compatible = "samsung,exynos2200-cmu-peric1"; + reg = <0x0 0x10700000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_PERIC1_NOC>, + <&cmu_top CLK_DOUT_CMU_PERIC1_IP0>, + <&cmu_top CLK_DOUT_CMU_PERIC1_IP1>; + clock-names = "oscclk", "noc", "ip0", "ip1"; + }; + + syscon_peric1: syscon@10720000 { + compatible = "samsung,exynos2200-peric1-sysreg", "syscon"; + reg = <0x0 0x10720000 0x0 0x2000>; + }; + + pinctrl_peric1: pinctrl@10730000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x10730000 0x0 0x1000>; + }; + + cmu_hsi0: clock-controller@10a00000 { + compatible = "samsung,exynos2200-cmu-hsi0"; + reg = <0x0 0x10a00000 0x0 0x8000>; + #clock-cells = <1>; + }; + + usb32drd: phy@10aa0000 { + compatible = "samsung,exynos2200-usb32drd-phy"; + reg = <0x0 0x10aa0000 0x0 0x10000>; + + clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>; + clock-names = "phy"; + + #phy-cells = <1>; + phys = <&usb_hsphy>; + phy-names = "hs"; + + samsung,pmu-syscon = <&pmu_system_controller>; + + status = "disabled"; + }; + + usb_hsphy: phy@10ab0000 { + compatible = "samsung,exynos2200-eusb2-phy"; + reg = <0x0 0x10ab0000 0x0 0x10000>; + + clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>, + <&cmu_hsi0 CLK_MOUT_HSI0_NOC>, + <&cmu_hsi0 CLK_DOUT_DIV_CLK_HSI0_EUSB>; + clock-names = "ref", "bus", "ctrl"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb: usb@10b00000 { + compatible = "samsung,exynos2200-dwusb3"; + ranges = <0x0 0x0 0x10b00000 0x10000>; + + clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>; + clock-names = "link_aclk"; + + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + usb_dwc3: usb@0 { + compatible = "snps,dwc3"; + reg = <0x0 0x10000>; + + clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>; + clock-names = "ref"; + + interrupts = ; + + phys = <&usb32drd 0>; + phy-names = "usb2-phy"; + + snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; + snps,has-lpm-erratum; + snps,quirk-frame-length-adjustment = <0x20>; + snps,usb3_lpm_capable; + }; + }; + + cmu_ufs: clock-controller@11000000 { + compatible = "samsung,exynos2200-cmu-ufs"; + reg = <0x0 0x11000000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_UFS_NOC>, + <&cmu_top CLK_MOUT_CMU_UFS_MMC_CARD>, + <&cmu_top CLK_DOUT_CMU_UFS_UFS_EMBD>; + clock-names = "oscclk", "noc", "mmc", "ufs"; + }; + + syscon_ufs: syscon@11020000 { + compatible = "samsung,exynos2200-ufs-sysreg", "syscon"; + reg = <0x0 0x11020000 0x0 0x2000>; + }; + + pinctrl_ufs: pinctrl@11040000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x11040000 0x0 0x1000>; + }; + + pinctrl_hsi1ufs: pinctrl@11060000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x11060000 0x0 0x1000>; + }; + + pinctrl_hsi1: pinctrl@11240000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x11240000 0x0 0x1000>; + }; + + cmu_peric2: clock-controller@11c00000 { + compatible = "samsung,exynos2200-cmu-peric2"; + reg = <0x0 0x11c00000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_PERIC2_NOC>, + <&cmu_top CLK_DOUT_CMU_PERIC2_IP0>, + <&cmu_top CLK_DOUT_CMU_PERIC2_IP1>; + clock-names = "oscclk", "noc", "ip0", "ip1"; + }; + + syscon_peric2: syscon@11c20000 { + compatible = "samsung,exynos2200-peric2-sysreg", "syscon"; + reg = <0x0 0x11c20000 0x0 0x4000>; + }; + + pinctrl_peric2: pinctrl@11c30000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x11c30000 0x0 0x1000>; + }; + + cmu_cmgp: clock-controller@14e00000 { + compatible = "samsung,exynos2200-cmu-cmgp"; + reg = <0x0 0x14e00000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_alive CLK_DOUT_ALIVE_CMGP_NOC>, + <&cmu_alive CLK_DOUT_ALIVE_CMGP_PERI>; + clock-names = "oscclk", "noc", "peri"; + }; + + syscon_cmgp: syscon@14e20000 { + compatible = "samsung,exynos2200-cmgp-sysreg", "syscon"; + reg = <0x0 0x14e20000 0x0 0x2000>; + }; + + pinctrl_cmgp: pinctrl@14e30000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x14e30000 0x0 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos2200-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + }; + }; + + cmu_vts: clock-controller@15300000 { + compatible = "samsung,exynos2200-cmu-vts"; + reg = <0x0 0x15300000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_VTS_DMIC>; + clock-names = "oscclk", "dmic"; + }; + + pinctrl_vts: pinctrl@15320000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x15320000 0x0 0x1000>; + }; + + cmu_alive: clock-controller@15800000 { + compatible = "samsung,exynos2200-cmu-alive"; + reg = <0x0 0x15800000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top CLK_DOUT_CMU_ALIVE_NOC>; + clock-names = "oscclk", "noc"; + }; + + pinctrl_alive: pinctrl@15850000 { + compatible = "samsung,exynos2200-pinctrl"; + reg = <0x0 0x15850000 0x0 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos2200-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + }; + }; + + pmu_system_controller: system-controller@15860000 { + compatible = "samsung,exynos2200-pmu", + "samsung,exynos7-pmu", "syscon"; + reg = <0x0 0x15860000 0x0 0x10000>; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x3c00>; /* SYSTEM_CONFIGURATION */ + mask = <0x2>; /* SWRESET_SYSTEM */ + value = <0x2>; /* reset value */ + }; + }; + + cmu_top: clock-controller@1a320000 { + compatible = "samsung,exynos2200-cmu-top"; + reg = <0x0 0x1a320000 0x0 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>; + clock-names = "oscclk"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + /* + * Non-updatable, broken stock Samsung bootloader does not + * configure CNTFRQ_EL0 + */ + clock-frequency = <25600000>; + }; +}; + +#include "exynos2200-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 8f02de8480b6..a1fb354dea9f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -85,7 +85,7 @@ homepage-key { }; }; - i2c_max98504: i2c-gpio-0 { + i2c_max98504: i2c-13 { compatible = "i2c-gpio"; sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>; scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts index 61eec1aff32e..b8ce433b93b1 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts @@ -89,7 +89,7 @@ key-volup { memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0x3d800000>, - <0x0 0x80000000 0x7d800000>; + <0x0 0x80000000 0x40000000>; }; pwrseq_mmc1: pwrseq-mmc1 { diff --git a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts index eb97dcc41542..b1d9eff5a827 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts @@ -78,7 +78,7 @@ key-volup { memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0x3e400000>, - <0x0 0x80000000 0xbe400000>; + <0x0 0x80000000 0x80000000>; }; pwrseq_mmc1: pwrseq-mmc1 { diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/dts/exynos/exynos7870.dtsi index 5cba8c9bb403..d5d347623b90 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi @@ -327,6 +327,7 @@ usb@0 { phys = <&usbdrd_phy 0>; usb-role-switch; + snps,usb2-gadget-lpm-disable; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi index 2cb8041c8a9f..0fdf2062930a 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -455,6 +455,26 @@ serial_0: serial@10880000 { samsung,uart-fifosize = <256>; status = "disabled"; }; + + spi_0: spi@10880000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10880000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus &spi0_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 1>, <&pdma0 0>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <256>; + status = "disabled"; + }; }; usi_1: usi@108a00c0 { @@ -484,6 +504,26 @@ serial_1: serial@108a0000 { samsung,uart-fifosize = <256>; status = "disabled"; }; + + spi_1: spi@108a0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x108a0000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus &spi1_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 3>, <&pdma0 2>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <256>; + status = "disabled"; + }; }; usi_2: usi@108c00c0 { @@ -513,6 +553,26 @@ serial_2: serial@108c0000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_2: spi@108c0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x108c0000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus &spi2_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 5>, <&pdma0 4>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_3: usi@108e00c0 { @@ -542,6 +602,26 @@ serial_3: serial@108e0000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_3: spi@108e0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x108e0000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_bus &spi3_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_4: usi@109000c0 { @@ -571,6 +651,26 @@ serial_4: serial@10900000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_4: spi@10900000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10900000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_bus &spi4_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_5: usi@109200c0 { @@ -600,6 +700,26 @@ serial_5: serial@10920000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_5: spi@10920000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10920000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi5_bus &spi5_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_6: usi@109400c0 { @@ -629,6 +749,26 @@ serial_6: serial@10940000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_6: spi@10940000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10940000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi6_bus &spi6_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 13>, <&pdma0 12>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_7: usi@109600c0 { @@ -658,6 +798,26 @@ serial_7: serial@10960000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_7: spi@10960000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10960000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi7_bus &spi7_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 15>, <&pdma0 14>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_8: usi@109800c0 { @@ -687,6 +847,27 @@ serial_8: serial@10980000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_8: spi@10980000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10980000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi8_bus &spi8_cs_func>; + clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>, + <&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma0 17>, <&pdma0 16>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; + }; pwm: pwm@109b0000 { @@ -752,6 +933,26 @@ serial_9: serial@10c8000 { samsung,uart-fifosize = <256>; status = "disabled"; }; + + spi_9: spi@10c80000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10c80000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi9_bus &spi9_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 1>, <&pdma1 0>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <256>; + status = "disabled"; + }; }; usi_10: usi@10ca00c0 { @@ -781,6 +982,26 @@ serial_10: serial@10ca0000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_10: spi@10ca0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10ca0000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi10_bus &spi10_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 3>, <&pdma1 2>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_11: usi@10cc00c0 { @@ -810,6 +1031,26 @@ serial_11: serial@10cc0000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_11: spi@10cc0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10cc0000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi11_bus &spi11_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 5>, <&pdma1 4>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_12: usi@10ce00c0 { @@ -839,6 +1080,26 @@ serial_12: serial@10ce0000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_12: spi@10ce0000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10ce0000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi12_bus &spi12_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_13: usi@10d000c0 { @@ -868,6 +1129,26 @@ serial_13: serial@10d00000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_13: spi@10d00000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d00000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi13_bus &spi13_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 9>, <&pdma1 8>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_14: usi@10d200c0 { @@ -897,6 +1178,26 @@ serial_14: serial@10d20000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_14: spi@10d20000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d20000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi14_bus &spi14_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 11>, <&pdma1 10>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_15: usi@10d400c0 { @@ -926,6 +1227,26 @@ serial_15: serial@10d40000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_15: spi@10d40000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d40000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi15_bus &spi15_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 13>, <&pdma1 12>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_16: usi@10d600c0 { @@ -955,6 +1276,26 @@ serial_16: serial@10d60000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_16: spi@10d60000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d60000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi16_bus &spi16_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 15>, <&pdma1 14>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; usi_17: usi@10d800c0 { @@ -984,6 +1325,26 @@ serial_17: serial@10d80000 { samsung,uart-fifosize = <64>; status = "disabled"; }; + + spi_17: spi@10d80000 { + compatible = "samsung,exynosautov920-spi", + "samsung,exynos850-spi"; + reg = <0x10d80000 0x30>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi17_bus &spi17_cs_func>; + clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>, + <&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + dmas = <&pdma1 17>, <&pdma1 16>; + dma-names = "tx", "rx"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <64>; + status = "disabled"; + }; }; cmu_top: clock-controller@11000000 { @@ -1048,6 +1409,23 @@ pinctrl_hsi1: pinctrl@16450000 { interrupts = ; }; + cmu_hsi2: clock-controller@16b00000 { + compatible = "samsung,exynosautov920-cmu-hsi2"; + reg = <0x16b00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_HSI2_NOC>, + <&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>, + <&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>; + clock-names = "oscclk", + "noc", + "ufs", + "embd", + "ethernet"; + }; + pinctrl_hsi2: pinctrl@16c10000 { compatible = "samsung,exynosautov920-pinctrl"; reg = <0x16c10000 0x10000>; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi index d6ddcc13f7b2..84ff3e047d3b 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi @@ -60,6 +60,21 @@ button-power { }; }; + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&nvmem_reboot_mode>; + nvmem-cell-names = "reboot-mode"; + mode-bootloader = <0x800000fc>; + mode-charge = <0x8000000a>; + mode-dm-verity-device-corrupted = <0x80000050>; + mode-fastboot = <0x800000fa>; + mode-reboot-ab-update = <0x80000052>; + mode-recovery = <0x800000ff>; + mode-rescue = <0x800000f9>; + mode-shutdown-thermal = <0x80000051>; + mode-shutdown-thermal-battery = <0x80000051>; + }; + /* TODO: Remove this once PMIC is implemented */ reg_placeholder: regulator-0 { compatible = "regulator-fixed"; @@ -85,6 +100,20 @@ cont_splash_mem: splash@fac00000 { }; }; +&acpm_ipc { + pmic { + compatible = "samsung,s2mpg10-pmic"; + interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + system-power-controller; + wakeup-source; + + regulators { + }; + }; +}; + &ext_24_5m { clock-frequency = <24576000>; }; @@ -188,6 +217,60 @@ usbc0_role_sw: endpoint { }; }; }; + + pmic@66 { + compatible = "maxim,max77759"; + reg = <0x66>; + + pinctrl-0 = <&if_pmic_int>; + pinctrl-names = "default"; + interrupts-extended = <&gpa8 3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio { + compatible = "maxim,max77759-gpio"; + + gpio-controller; + #gpio-cells = <2>; + /* + * "Human-readable name [SIGNAL_LABEL]" where the + * latter comes from the schematic + */ + gpio-line-names = "OTG boost [OTG_BOOST_EN]", + "max20339 IRQ [MW_OVP_INT_L]"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + nvmem-0 { + compatible = "maxim,max77759-nvmem"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + nvmem_reboot_mode: reboot-mode@0 { + reg = <0x0 0x4>; + }; + + boot-reason@4 { + reg = <0x4 0x4>; + }; + + shutdown-user-flag@8 { + reg = <0x8 0x1>; + }; + + rsoc@a { + reg = <0xa 0x2>; + }; + }; + }; + }; }; &pinctrl_far_alive { @@ -211,9 +294,22 @@ typec_int: typec-int-pins { samsung,pin-pud = ; samsung,pin-drv = ; }; + + if_pmic_int: if-pmic-int-pins { + samsung,pins = "gpa8-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; }; &pinctrl_gpio_alive { + pmic_int: pmic-int-pins { + samsung,pins = "gpa0-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + key_power: key-power-pins { samsung,pins = "gpa10-1"; samsung,pin-function = ; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index 48c691fd0a3a..c0f8c25861a9 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -155,6 +155,7 @@ ananke_cpu_sleep: cpu-ananke-sleep { idle-state-name = "c2"; compatible = "arm,idle-state"; arm,psci-suspend-param = <0x0010000>; + local-timer-stop; entry-latency-us = <70>; exit-latency-us = <160>; min-residency-us = <2000>; @@ -164,6 +165,7 @@ enyo_cpu_sleep: cpu-enyo-sleep { idle-state-name = "c2"; compatible = "arm,idle-state"; arm,psci-suspend-param = <0x0010000>; + local-timer-stop; entry-latency-us = <150>; exit-latency-us = <190>; min-residency-us = <2500>; @@ -173,6 +175,7 @@ hera_cpu_sleep: cpu-hera-sleep { idle-state-name = "c2"; compatible = "arm,idle-state"; arm,psci-suspend-param = <0x0010000>; + local-timer-stop; entry-latency-us = <235>; exit-latency-us = <220>; min-residency-us = <3500>; @@ -1368,6 +1371,7 @@ ufs_0: ufs@14700000 { <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>; clock-names = "core_clk", "sclk_unipro_main", "fmp", "aclk", "pclk", "sysreg"; + dma-coherent; freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>; pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; pinctrl-names = "default"; @@ -1415,10 +1419,7 @@ poweroff: syscon-poweroff { }; reboot: syscon-reboot { - compatible = "syscon-reboot"; - offset = <0x3a00>; /* SYSTEM_CONFIGURATION */ - mask = <0x2>; /* SWRESET_SYSTEM */ - value = <0x2>; /* reset value */ + compatible = "google,gs101-reboot"; }; reboot-mode { @@ -1426,6 +1427,7 @@ reboot-mode { offset = <0x0810>; /* EXYNOS_PMU_SYSIP_DAT0 */ mode-bootloader = <0xfc>; mode-charge = <0x0a>; + mode-dm-verity-device-corrupted = <0x50>; mode-fastboot = <0xfa>; mode-reboot-ab-update = <0x52>; mode-recovery = <0xff>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 0b473a23d120..23535ed47631 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -229,6 +229,14 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb + +imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \ + imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtbo +imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17-dtbs += imx8mp-tx8p-ml81-moduline-display-106.dtb \ + imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb @@ -260,16 +268,16 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-lvds1-imx-lvds-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-mx8-dlvds-lcd1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk-pcie-ep.dtb -imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo +imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo -imx8mp-tqma8mpql-mba8mp-ras314-lvds-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo -imx8mp-tqma8mpql-mba8mp-ras314-lvds-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo -dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb +imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo +imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219-dtbs += imx8mp-tqma8mpql-mba8mp-ras314.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtbo imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds.dtb -dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-imx219.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314-lvds-tm070jvhg33-imx219.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb imx8mq-evk-pcie1-ep-dtbs += imx8mq-evk.dtb imx-pcie1-ep.dtbo @@ -301,6 +309,14 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb + +imx8qm-mek-ov5640-csi0-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo +dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi0.dtb +imx8qm-mek-ov5640-csi1-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi1.dtbo +dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-csi1.dtb +imx8qm-mek-ov5640-dual-dtbs := imx8qm-mek.dtb imx8qm-mek-ov5640-csi0.dtbo imx8qm-mek-ov5640-csi1.dtbo +dtb-${CONFIG_ARCH_MXC} += imx8qm-mek-ov5640-dual.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb @@ -311,6 +327,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb imx8qxp-mek-pcie-ep-dtbs += imx8qxp-mek.dtb imx-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek-pcie-ep.dtb +imx8qxp-mek-ov5640-csi-dtbs := imx8qxp-mek.dtb imx8qxp-mek-ov5640-csi.dtbo +dtb-${CONFIG_ARCH_MXC} += imx8qxp-mek-ov5640-csi.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb @@ -324,6 +343,16 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-14x14-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb + +imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo +imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo +imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo +imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb + dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb @@ -339,6 +368,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts index 03748a7f657b..e04483fdb908 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts @@ -41,9 +41,21 @@ &esdhc { wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; }; +&sfp1 { + status = "okay"; +}; + +&sfp1_i2c { + status = "okay"; +}; + &usb2 { status = "okay"; }; #include "fsl-ls1043-post.dtsi" #include "tqmls104xa-mbls10xxa-fman.dtsi" + +&enet6 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi index 12d5f3938e5d..257d90bb9c20 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi @@ -17,11 +17,10 @@ &qspi { qflash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index c0e3e8fa1e79..26bea88cb967 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -550,6 +550,9 @@ i2c1: i2c@2190000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 36>, + <&edma0 1 37>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -563,6 +566,9 @@ i2c2: i2c@21a0000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 34>, + <&edma0 1 35>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -576,6 +582,9 @@ i2c3: i2c@21b0000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 40>, + <&edma0 1 41>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -717,6 +726,9 @@ lpuart0: serial@2950000 { interrupts = ; clocks = <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg"; + dmas = <&edma0 1 32>, + <&edma0 1 33>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -727,6 +739,9 @@ lpuart1: serial@2960000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 30>, + <&edma0 1 31>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -737,6 +752,9 @@ lpuart2: serial@2970000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 28>, + <&edma0 1 29>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -747,6 +765,9 @@ lpuart3: serial@2980000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 26>, + <&edma0 1 27>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -757,6 +778,9 @@ lpuart4: serial@2990000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 24>, + <&edma0 1 25>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -767,6 +791,9 @@ lpuart5: serial@29a0000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 22>, + <&edma0 1 23>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts index 37834ae3deac..43261cda3fcf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts @@ -44,6 +44,22 @@ &esdhc { wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; }; +&sfp1 { + status = "okay"; +}; + +&sfp2 { + status = "okay"; +}; + +&sfp1_i2c { + status = "okay"; +}; + +&sfp2_i2c { + status = "okay"; +}; + &usb2 { status = "okay"; }; @@ -51,6 +67,10 @@ &usb2 { #include "fsl-ls1046-post.dtsi" #include "tqmls104xa-mbls10xxa-fman.dtsi" -&enet7 { - status = "disabled"; +&enet6 { + status = "okay"; +}; + +&enet7 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi index 4a8f8bc688f5..fa543db99def 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi @@ -17,11 +17,10 @@ &qspi { qflash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; partitions { compatible = "fixed-partitions"; @@ -38,5 +37,6 @@ qflash1: flash@1 { spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 983b2f0e8797..4a22fde38bea 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -523,6 +523,9 @@ i2c1: i2c@2190000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 36>, + <&edma0 1 37>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -535,6 +538,9 @@ i2c2: i2c@21a0000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 34>, + <&edma0 1 35>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -547,6 +553,9 @@ i2c3: i2c@21b0000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + dmas = <&edma0 1 40>, + <&edma0 1 41>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -633,6 +642,9 @@ lpuart0: serial@2950000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; clock-names = "ipg"; + dmas = <&edma0 1 32>, + <&edma0 1 33>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -643,6 +655,9 @@ lpuart1: serial@2960000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 30>, + <&edma0 1 31>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -653,6 +668,9 @@ lpuart2: serial@2970000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 28>, + <&edma0 1 29>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -663,6 +681,9 @@ lpuart3: serial@2980000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 26>, + <&edma0 1 27>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -673,6 +694,9 @@ lpuart4: serial@2990000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 24>, + <&edma0 1 25>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -683,6 +707,9 @@ lpuart5: serial@29a0000 { clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dmas = <&edma0 1 22>, + <&edma0 1 23>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts index e567918f6afc..181eeab55aa0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts @@ -53,6 +53,14 @@ &esdhc { wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; }; +&sfp1 { + status = "okay"; +}; + +&sfp2 { + status = "okay"; +}; + &sfp1_i2c { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi index 9a0f21484be9..b8a213df238a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi @@ -17,11 +17,10 @@ &qspi { qflash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; partitions { compatible = "fixed-partitions"; @@ -38,5 +37,6 @@ qflash1: flash@1 { spi-max-frequency = <62500000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; + vcc-supply = <®_vcc1v8>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 4d721197d837..2d01e20b47e7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -43,12 +43,22 @@ mdio@0 { /* On-board PHY #1 RGMI1*/ reg = <0x00>; #address-cells = <1>; #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; }; mdio@8 { /* On-board PHY #2 RGMI2*/ reg = <0x8>; #address-cells = <1>; #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x2>; + }; }; mdio@18 { /* Slot #1 */ @@ -169,6 +179,16 @@ &crypto { status = "okay"; }; +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + &dspi0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi index d39242c1b9f7..2cf0f7208350 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -10,12 +10,264 @@ img_ipg_clk: clock-img-ipg { clock-output-names = "img_ipg_clk"; }; +img_pxl_clk: clock-img-pxl { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + clock-output-names = "img_pxl_clk"; +}; + img_subsys: bus@58000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x58000000 0x0 0x58000000 0x1000000>; + isi: isi@58100000 { + reg = <0x58100000 0x80000>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>, + <&pdma1_lpcg IMX_LPCG_CLK_0>, + <&pdma2_lpcg IMX_LPCG_CLK_0>, + <&pdma3_lpcg IMX_LPCG_CLK_0>, + <&pdma4_lpcg IMX_LPCG_CLK_0>, + <&pdma5_lpcg IMX_LPCG_CLK_0>, + <&pdma6_lpcg IMX_LPCG_CLK_0>, + <&pdma7_lpcg IMX_LPCG_CLK_0>; + clock-names = "per0", "per1", "per2", "per3", + "per4", "per5", "per6", "per7"; + interrupt-parent = <&gic>; + power-domains = <&pd IMX_SC_R_ISI_CH0>, + <&pd IMX_SC_R_ISI_CH1>, + <&pd IMX_SC_R_ISI_CH2>, + <&pd IMX_SC_R_ISI_CH3>, + <&pd IMX_SC_R_ISI_CH4>, + <&pd IMX_SC_R_ISI_CH5>, + <&pd IMX_SC_R_ISI_CH6>, + <&pd IMX_SC_R_ISI_CH7>; + status = "disabled"; + }; + + irqsteer_csi0: irqsteer@58220000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x58220000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = ; + clocks = <&img_ipg_clk>; + clock-names = "ipg"; + interrupt-parent = <&gic>; + power-domains = <&pd IMX_SC_R_CSI_0>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + status = "disabled"; + }; + + gpio0_mipi_csi0: gpio@58222000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x58222000 0x1000>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&irqsteer_csi0>; + power-domains = <&pd IMX_SC_R_CSI_0>; + }; + + csi0_core_lpcg: clock-controller@58223018 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58223018 0x4>; + clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_PER>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "csi0_lpcg_core_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + csi0_esc_lpcg: clock-controller@5822301c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5822301c 0x4>; + clocks = <&clk IMX_SC_R_CSI_0 IMX_SC_PM_CLK_MISC>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "csi0_lpcg_esc_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + i2c_mipi_csi0: i2c@58226000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x58226000 0x1000>; + interrupts = <8>; + clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>, + <&img_ipg_clk>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_CSI_0_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + interrupt-parent = <&irqsteer_csi0>; + power-domains = <&pd IMX_SC_R_CSI_0_I2C_0>; + status = "disabled"; + }; + + mipi_csi_0: csi@58227000 { + compatible = "fsl,imx8qxp-mipi-csi2"; + reg = <0x58227000 0x1000>, + <0x58221000 0x1000>; + clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>, + <&csi0_esc_lpcg IMX_LPCG_CLK_4>, + <&csi0_pxl_lpcg IMX_LPCG_CLK_0>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&csi0_core_lpcg IMX_LPCG_CLK_4>, + <&csi0_esc_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <360000000>, <72000000>; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + resets = <&scu_reset IMX_SC_R_CSI_0>; + status = "disabled"; + }; + + irqsteer_csi1: irqsteer@58240000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x58240000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = ; + clocks = <&img_ipg_clk>; + clock-names = "ipg"; + interrupt-parent = <&gic>; + power-domains = <&pd IMX_SC_R_CSI_1>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + status = "disabled"; + }; + + gpio0_mipi_csi1: gpio@58242000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x58242000 0x1000>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&irqsteer_csi1>; + power-domains = <&pd IMX_SC_R_CSI_1>; + }; + + csi1_core_lpcg: clock-controller@58243018 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58243018 0x4>; + clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_PER>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "csi1_lpcg_core_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + csi1_esc_lpcg: clock-controller@5824301c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5824301c 0x4>; + clocks = <&clk IMX_SC_R_CSI_1 IMX_SC_PM_CLK_MISC>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "csi1_lpcg_esc_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + i2c_mipi_csi1: i2c@58246000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x58246000 0x1000>; + interrupts = <8>; + clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>, + <&img_ipg_clk>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_CSI_1_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + interrupt-parent = <&irqsteer_csi1>; + power-domains = <&pd IMX_SC_R_CSI_1_I2C_0>; + status = "disabled"; + }; + + mipi_csi_1: csi@58247000 { + compatible = "fsl,imx8qxp-mipi-csi2"; + reg = <0x58247000 0x1000>, + <0x58241000 0x1000>; + clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>, + <&csi1_esc_lpcg IMX_LPCG_CLK_4>, + <&csi1_pxl_lpcg IMX_LPCG_CLK_0>; + clock-names = "core", "esc", "ui"; + assigned-clocks = <&csi1_core_lpcg IMX_LPCG_CLK_4>, + <&csi1_esc_lpcg IMX_LPCG_CLK_4>; + assigned-clock-rates = <360000000>, <72000000>; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + resets = <&scu_reset IMX_SC_R_CSI_1>; + status = "disabled"; + }; + + irqsteer_parallel: irqsteer@58260000 { + compatible = "fsl,imx8qm-irqsteer", "fsl,imx-irqsteer"; + reg = <0x58260000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = ; + clocks = <&clk_dummy>; + clock-names = "ipg"; + interrupt-parent = <&gic>; + power-domains = <&pd IMX_SC_R_PI_0>; + fsl,channel = <0>; + fsl,num-irqs = <32>; + status = "disabled"; + }; + + pi0_ipg_lpcg: clock-controller@58263004 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58263004 0x4>; + clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pi0_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + pi0_pxl_lpcg: clock-controller@58263018 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58263018 0x4>; + clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pi0_lpcg_pxl_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + pi0_misc_lpcg: clock-controller@5826301c { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5826301c 0x4>; + clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_MISC0>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pi0_lpcg_misc_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + i2c0_parallel: i2c@58266000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x58266000 0x1000>; + interrupts = <8>; + clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>, + <&img_ipg_clk>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX_SC_R_PI_0_I2C_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + interrupt-parent = <&irqsteer_parallel>; + power-domains = <&pd IMX_SC_R_PI_0_I2C_0>; + status = "disabled"; + }; + jpegdec: jpegdec@58400000 { reg = <0x58400000 0x00050000>; interrupts = ; @@ -40,6 +292,116 @@ jpegenc: jpegenc@58450000 { <&pd IMX_SC_R_MJPEG_ENC_S0>; }; + pdma0_lpcg: clock-controller@58500000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58500000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pdma0_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH0>; + }; + + pdma1_lpcg: clock-controller@58510000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58510000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pdma1_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH1>; + }; + + pdma2_lpcg: clock-controller@58520000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58520000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pdma2_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH2>; + }; + + pdma3_lpcg: clock-controller@58530000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58530000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pdma3_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH3>; + }; + + pdma4_lpcg: clock-controller@58540000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58540000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pdma4_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH4>; + }; + + pdma5_lpcg: clock-controller@58550000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58550000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pdma5_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH5>; + }; + + pdma6_lpcg: clock-controller@58560000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58560000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pdma6_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH6>; + }; + + pdma7_lpcg: clock-controller@58570000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58570000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "pdma7_lpcg_clk"; + power-domains = <&pd IMX_SC_R_ISI_CH7>; + }; + + csi0_pxl_lpcg: clock-controller@58580000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58580000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "csi0_lpcg_pxl_clk"; + power-domains = <&pd IMX_SC_R_CSI_0>; + }; + + csi1_pxl_lpcg: clock-controller@58590000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x58590000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "csi1_lpcg_pxl_clk"; + power-domains = <&pd IMX_SC_R_CSI_1>; + }; + + hdmi_rx_pxl_link_lpcg: clock-controller@585a0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x585a0000 0x10000>; + clocks = <&img_pxl_clk>; + #clock-cells = <1>; + clock-indices = ; + clock-output-names = "hdmi_rx_lpcg_pxl_link_clk"; + power-domains = <&pd IMX_SC_R_HDMI_RX>; + }; + img_jpeg_dec_lpcg: clock-controller@585d0000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x585d0000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi new file mode 100644 index 000000000000..3e04142aca5c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-security.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include + +security_subsys: bus@31400000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x31400000 0x0 0x31400000 0x90000>; + + crypto: crypto@31400000 { + compatible = "fsl,imx8qm-caam", "fsl,sec-v4.0"; + reg = <0x31400000 0x90000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x31400000 0x90000>; + power-domains = <&pd IMX_SC_R_CAAM_JR2>; + fsl,sec-era = <9>; + + sec_jr2: jr@30000 { + compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = ; + power-domains = <&pd IMX_SC_R_CAAM_JR2>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,imx8qm-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = ; + power-domains = <&pd IMX_SC_R_CAAM_JR3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index 21bcd82fd092..8287a7f66ed3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -294,6 +294,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index 5a3b1142ddf4..37db4f0dd505 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -418,6 +418,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index d8b67e12f7d7..272c2b223d16 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -833,6 +833,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 46d1ee0a4ee8..c09b40fc6dec 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -743,6 +743,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index c0aadff4e25b..636daa3d6ca2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -621,6 +621,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts index 86a610de84fe..99572961d9e1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts @@ -682,6 +682,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index cfebaa01217e..ded89b046970 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -915,6 +915,8 @@ uart2: serial@30890000 { clocks = <&clk IMX8MM_CLK_UART2_ROOT>, <&clk IMX8MM_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index 67a99383a632..917b7d0007a7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -305,6 +305,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MN_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts index dc94d73f7106..d7f7f9aafb7d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts @@ -79,6 +79,10 @@ &sai3 { <&clk IMX8MN_AUDIO_PLL2_OUT>; }; +&sound { + audio-asrc = <&easrc>; +}; + &tlv320aic3x04 { clock-names = "mclk"; clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi index 640c41b51af9..1d23814e11cd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi @@ -52,6 +52,10 @@ &A53_0 { cpu-supply = <&buck2_reg>; }; +&easrc { + status = "okay"; +}; + &flexspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 30c286b34aa5..a5f52f60169e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -693,6 +693,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MN_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 848ba5e46ee6..b98b3d0ddf25 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -860,6 +860,8 @@ uart2: serial@30890000 { clocks = <&clk IMX8MN_CLK_UART2_ROOT>, <&clk IMX8MN_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 1ba3018c621e..c0cc5611048e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -168,37 +168,6 @@ audio_codec_bt_sco: audio-codec-bt-sco { #sound-dai-cells = <1>; }; - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "wm8960-audio"; - simple-audio-card,format = "i2s"; - simple-audio-card,frame-master = <&cpudai>; - simple-audio-card,bitclock-master = <&cpudai>; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Speaker", "External Speaker", - "Microphone", "Mic Jack"; - simple-audio-card,routing = - "Headphone Jack", "HP_L", - "Headphone Jack", "HP_R", - "External Speaker", "SPK_LP", - "External Speaker", "SPK_LN", - "External Speaker", "SPK_RP", - "External Speaker", "SPK_RN", - "LINPUT1", "Mic Jack", - "LINPUT3", "Mic Jack", - "Mic Jack", "MICB"; - - cpudai: simple-audio-card,cpu { - sound-dai = <&sai3>; - }; - - simple-audio-card,codec { - sound-dai = <&wm8960>; - }; - - }; - sound-bt-sco { compatible = "simple-audio-card"; simple-audio-card,name = "bt-sco-audio"; @@ -239,6 +208,26 @@ cpu { }; }; + sound-wm8960 { + compatible = "fsl,imx-audio-wm8960"; + audio-asrc = <&easrc>; + audio-codec = <&wm8960>; + audio-cpu = <&sai3>; + audio-routing = "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "Mic Jack", "MICB"; + hp-det-gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + model = "wm8960-audio"; + pinctrl-0 = <&pinctrl_hpdet>; + pinctrl-names = "default"; + }; + sound-xcvr { compatible = "fsl,imx-audio-card"; model = "imx-audio-xcvr"; @@ -319,6 +308,11 @@ &dsp { status = "okay"; }; +&easrc { + fsl,asrc-rate = <48000>; + status = "okay"; +}; + &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; @@ -952,6 +946,12 @@ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010 >; }; + pinctrl_hpdet: hpdetgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0xd6 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi index 2ce1860b244d..f269f7a004fc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi @@ -89,4 +89,22 @@ &media_blk_ctrl { <1039500000>; }; +&vpu_g1 { + assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>; +}; + +&vpu_g2 { + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; + assigned-clock-rates = <500000000>; +}; + +&vpumix_blk_ctrl { + assigned-clocks = <&clk IMX8MP_VPU_PLL>, <&clk IMX8MP_CLK_VPU_BUS>; + assigned-clock-parents = <0>, <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <600000000>, <600000000>; +}; + /delete-node/ &{noc_opp_table/opp-1000000000}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h index 0fef066471ba..16f5899de415 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h @@ -6,6 +6,39 @@ #ifndef __DTS_IMX8MP_PINFUNC_H #define __DTS_IMX8MP_PINFUNC_H +/* Drive Strength */ +#define MX8MP_DSE_X1 0x0 +#define MX8MP_DSE_X2 0x4 +#define MX8MP_DSE_X4 0x2 +#define MX8MP_DSE_X6 0x6 + +/* Slew Rate */ +#define MX8MP_FSEL_FAST 0x10 +#define MX8MP_FSEL_SLOW 0x0 + +/* Open Drain */ +#define MX8MP_ODE_ENABLE 0x20 +#define MX8MP_ODE_DISABLE 0x0 + +#define MX8MP_PULL_DOWN 0x0 +#define MX8MP_PULL_UP 0x40 + +/* Hysteresis */ +#define MX8MP_HYS_CMOS 0x0 +#define MX8MP_HYS_SCHMITT 0x80 + +#define MX8MP_PULL_ENABLE 0x100 +#define MX8MP_PULL_DISABLE 0x0 + +/* SION force input mode */ +#define MX8MP_SION 0x40000000 + +/* long defaults */ +#define MX8MP_USDHC_DATA_DEFAULT (MX8MP_FSEL_FAST | MX8MP_PULL_UP | \ + MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) +#define MX8MP_I2C_DEFAULT (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | \ + MX8MP_PULL_ENABLE | MX8MP_SION) + /* * The pin function ID is a tuple of * diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts index 55b8c5c14fb4..6f9dcd3a75c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts @@ -102,11 +102,6 @@ &gpio1 { <&pinctrl_gpio13>; }; -&gpio3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lvds_dsi_sel>; -}; - &gpio4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio4>, <&pinctrl_gpio6>; @@ -213,6 +208,7 @@ fan_controller: fan@18 { #pwm-cells = <2>; fan { + cooling-levels = <255>; pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi index 22f6daabdb90..bebe19eb360f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi @@ -320,6 +320,8 @@ &gpio2 { }; &gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_dsi_sel>; gpio-line-names = "ETH_0_INT#", /* 0 */ "SLEEP#", "", @@ -349,14 +351,6 @@ &gpio3 { "", "", "SMARC_I2C_PM_CK"; - - lvds_dsi_mux_hog: lvds-dsi-mux-hog { - gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; - line-name = "LVDS_DSI_SEL"; - /* LVDS_DSI_SEL as DSI */ - output-low; - }; }; &gpio4 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso similarity index 100% rename from arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso rename to arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-tm070jvhg33.dtso diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 23c612e80dd3..33cd92e63c5d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -235,6 +235,7 @@ linux,cma { sound { compatible = "fsl,imx-audio-tlv320aic32x4"; model = "tqm-tlv320aic32"; + audio-asrc = <&easrc>; audio-cpu = <&sai3>; audio-codec = <&tlv320aic3x04>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi index 6067ca3be814..fd70b686e7ef 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi @@ -30,6 +30,10 @@ &A53_0 { cpu-supply = <&buck2_reg>; }; +&easrc { + status = "okay"; +}; + &flexspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso new file mode 100644 index 000000000000..e3965caca6be --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtso @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2025 GOcontroll B.V. + * Author: Maud Spierings + */ + +#include +#include + +#include "imx8mp-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + model = "GOcontroll Moduline Display with BOE av101hdt-a10 display"; + + panel { + compatible = "boe,av101hdt-a10"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_panel>; + pinctrl-names = "default"; + power-supply = <®_3v3_per>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + + port { + panel_lvds_in: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; + + reg_vbus: regulator-vbus { + compatible = "regulator-fixed"; + power-supply = <®_6v4>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-c-vbus"; + }; +}; + +&iomuxc { + pinctrl_panel: panelgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 + MX8MP_DSE_X1 + >; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */ + assigned-clock-rates = <0>, <1054620000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&panel_lvds_in>; + }; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + pd-disable; + vbus-supply = <®_vbus>; + + port { + high_speed_ep: endpoint { + remote-endpoint = <&usb1_hs_ep>; + }; + }; + }; + + port { + usb1_hs_ep: endpoint { + remote-endpoint = <&high_speed_ep>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso new file mode 100644 index 000000000000..3eb665ce9d5d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtso @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2025 GOcontroll B.V. + * Author: Maud Spierings + */ + +#include + +#include "imx8mp-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + model = "GOcontroll Moduline Display with BOE av123z7m-n17 display"; + + panel { + compatible = "boe,av123z7m-n17"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_panel>; + pinctrl-names = "default"; + power-supply = <®_3v3_per>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + + panel_in0: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + + panel_in1: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + }; +}; + +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + /* sn65dsi85 */ + bridge@2d { + compatible = "ti,sn65dsi84"; + reg = <0x2d>; + enable-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_lvds_bridge>; + pinctrl-names = "default"; + vcc-supply = <®_1v8_per>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_lvds_bridge_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + + port@3 { + reg = <3>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + }; + }; + + /* max25014 @ 0x6f */ +}; + +&iomuxc { + pinctrl_lvds_bridge: lvdsbridgegrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 + MX8MP_DSE_X1 + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 + MX8MP_DSE_X1 + >; + }; +}; + +&lcdif1 { + status = "okay"; +}; + +&mipi_dsi { + /* + * burst has to be at least 2x dsi clock that the sn65dsi85 expects + * display pixelclock * bpp / lanes / 2 = dsi clock + * 88.000.000 * 24 / 4 / 2 = 264.000.000 + * range gets rounded up to 265.000.000 - 270.000.000 + * 267.500.000 * 2 = 535.000.000 + */ + samsung,burst-clock-frequency = <535000000>; + samsung,esc-clock-frequency = <12000000>; + status = "okay"; + + ports { + port@1 { + mipi_dsi_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = < &dsi_lvds_bridge_in>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts new file mode 100644 index 000000000000..afd886dd590f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2025 GOcontroll B.V. + * Author: Maud Spierings + */ + +/dts-v1/; + +#include "imx8mp-tx8p-ml81.dtsi" + +/ { + compatible = "gocontroll,moduline-display", "fsl,imx8mp"; + chassis-type = "embedded"; + hardware = "Moduline Display V1.06"; + model = "GOcontroll Moduline Display baseboard"; + + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &eqos; + ethernet1 = &fec; + mmc0 = &usdhc3; + mmc1 = &usdhc2; + rtc0 = &rtc_pcf; /* i2c rtc is the main rtc */ + rtc1 = &snvs_rtc; + spi0 = &ecspi2; /* spidev number compatibility */ + spi1 = &ecspi1; /* spidev number compatibility */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + external-sensor-supply { + compatible = "regulator-output"; + vout-supply = <®_5v0_sensor>; + }; + + reg_1v8_per: regulator-1v8-per { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_reg_1v8>; + pinctrl-names = "default"; + power-supply = <®_3v3_per>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "1v8-per"; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_3v3_per: regulator-3v3-per { + compatible = "regulator-fixed"; + power-supply = <®_6v4>; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3-per"; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + power-supply = <®_6v4>; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "5v0"; + }; + + reg_5v0_sensor: regulator-5v0-sensor { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_reg_5v0_sensor>; + pinctrl-names = "default"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "5v0-supply-external-sensor"; + gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_6v4: regulator-6v4 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <6400000>; + regulator-min-microvolt = <6400000>; + regulator-name = "6v4"; + }; + + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can1-stby"; + gpio = <&gpio4 3 GPIO_ACTIVE_LOW>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can2-stby"; + gpio = <&gpio5 9 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,name = "tas2505-audio"; + simple-audio-card,routing = "Speaker", "DAC"; + simple-audio-card,widgets = "Speaker", "Speaker External"; + + simple-audio-card,codec { + sound-dai = <&tas2505>; + }; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai6>; + }; + }; + + wifi_powerseq: wifi-powerseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-0 = <&pinctrl_wl_reg>; + pinctrl-names = "default"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <500000>; + reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + }; +}; + +&ecspi1 { + cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>, + <&gpio1 11 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_ecspi1>; + pinctrl-names = "default"; + status = "okay"; + + connector@0 { + compatible = "gocontroll,moduline-module-slot"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + i2c-bus = <&i2c2>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + slot-number = <1>; + spi-max-frequency = <54000000>; + sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + vddhpp-supply = <®_6v4>; + vddp-supply = <®_5v0>; + vdd-supply = <®_3v3_per>; + }; + + connector@1 { + compatible = "gocontroll,moduline-module-slot"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + i2c-bus = <&i2c2>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + slot-number = <2>; + spi-max-frequency = <54000000>; + sync-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + vddhpp-supply = <®_6v4>; + vddp-supply = <®_5v0>; + vdd-supply = <®_3v3_per>; + }; + + adc@2 { + compatible = "microchip,mcp3004"; + reg = <2>; + spi-max-frequency = <2300000>; + vref-supply = <®_vdd_3v3>; + }; +}; + +&flexcan1 { + pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default"; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default"; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + tas2505: audio-codec@18 { + compatible = "ti,tas2505"; + reg = <0x18>; + clocks = <&clk IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + aic32x4-gpio-func = <0xff 0xff 0xff 0xff 0xff>; + av-supply = <®_1v8_per>; + dv-supply = <®_1v8_per>; + iov-supply = <®_vdd_3v3>; + pinctrl-0 = <&pinctrl_tas_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + }; + + rtc_pcf: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&iomuxc { + pinctrl_bt: btgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 + MX8MP_DSE_X1 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI + MX8MP_DSE_X4 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO + (MX8MP_DSE_X4 | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK + MX8MP_DSE_X4 + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 + MX8MP_DSE_X1 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 + MX8MP_DSE_X1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_TXD__CAN2_RX + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_UART3_RXD__CAN2_TX + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_usdhc2: pinctrlusdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + >; + }; + + pinctrl_reg_1v8: reg-1v8-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 + MX8MP_DSE_X1 + >; + }; + + pinctrl_reg_5v0_sensor: reg-5v0-sensorgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 + MX8MP_DSE_X1 + >; + }; + + pinctrl_sai6: sai6grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + >; + }; + + pinctrl_tas_reset: tasresetgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 + MX8MP_DSE_X1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B + (MX8MP_DSE_X6 | MX8MP_HYS_SCHMITT) + >; + }; + + pinctrl_wl_int: wlintgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 + (MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_wl_reg: wlreggrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 + MX8MP_DSE_X1 + >; + }; +}; + +&sai6 { + assigned-clocks = <&clk IMX8MP_CLK_SAI6>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + pinctrl-0 = <&pinctrl_sai6>; + pinctrl-names = "default"; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&pinctrl_uart1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&pinctrl_uart2>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt"; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wakeup"; + device-wakeup-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + max-speed = <921600>; + pinctrl-0 = <&pinctrl_bt>; + pinctrl-names = "default"; + shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + vbat-supply = <®_3v3_per>; + vddio-supply = <®_3v3_per>; + }; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "peripheral"; +}; + +&usdhc2 { + #address-cells = <1>; + #size-cells = <0>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <50000000>; + cap-power-off-card; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&wifi_powerseq>; + non-removable; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default"; + sd-uhs-sdr25; + vmmc-supply = <®_3v3_per>; + status = "okay"; + + wifi@1 { + compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + pinctrl-0 = <&pinctrl_wl_int>; + pinctrl-names = "default"; + brcm,board-type = "GOcontroll,moduline"; + }; +}; + +&wdog1 { + pinctrl-0 = <&pinctrl_wdog>; + pinctrl-names = "default"; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi new file mode 100644 index 000000000000..fe8ba16eb40e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020 Lothar Waßmann + * 2025 Maud Spierings + */ + +#include "imx8mp.dtsi" + +/ { + /* PHY regulator */ + regulator-3v3-etn { + compatible = "regulator-fixed"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&pinctrl_reg_3v3_etn>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3-etn"; + vin-supply = <®_vdd_3v3>; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&eqos { + assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_50M>; + assigned-clock-rates = <266000000>, <100000000>, <50000000>; + phy-handle = <ðphy0>; + phy-mode = "rmii"; + pinctrl-0 = <&pinctrl_eqos>; + pinctrl-1 = <&pinctrl_eqos_sleep>; + pinctrl-names = "default", "sleep"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pinctrl_ethphy_rst_b>; + pinctrl-names = "default"; + reset-delay-us = <25000>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk IMX8MP_CLK_ENET_QOS>; + pinctrl-0 = <&pinctrl_ethphy_int_b>; + pinctrl-names = "default"; + smsc,disable-energy-detect; + }; + }; +}; + +&gpio1 { + gpio-line-names = "SODIMM_152", + "SODIMM_42", + "PMIC_WDOG_B SODIMM_153", + "PMIC_IRQ_B", + "SODIMM_154", + "SODIMM_155", + "SODIMM_156", + "SODIMM_157", + "SODIMM_158", + "SODIMM_159", + "SODIMM_161", + "SODIMM_162", + "SODIMM_34", + "SODIMM_36", + "SODIMM_27", + "SODIMM_28", + "ENET_MDC", + "ENET_MDIO", + "", + "ENET_XTAL1/CLKIN", + "ENET_TXD1", + "ENET_TXD0", + "ENET_TXEN", + "ENET_POWER", + "ENET_COL/CRS_DV", + "ENET_RXER", + "ENET_RXD0", + "ENET_RXD1", + "", + "", + "", + ""; +}; + +&gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_51", + "SODIMM_57", + "SODIMM_56", + "SODIMM_52", + "SODIMM_53", + "SODIMM_54", + "SODIMM_55", + "SODIMM_15", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&gpio3 { + gpio-line-names = "", + "", + "EMMC_DS", + "EMMC_DAT5", + "EMMC_DAT6", + "EMMC_DAT7", + "", + "", + "", + "", + "EMMC_DAT0", + "EMMC_DAT1", + "EMMC_DAT2", + "EMMC_DAT3", + "", + "EMMC_DAT4", + "", + "EMMC_CLK", + "EMMC_CMD", + "SODIMM_75", + "SODIMM_145", + "SODIMM_163", + "SODIMM_164", + "SODIMM_165", + "SODIMM_143", + "SODIMM_144", + "SODIMM_72", + "SODIMM_73", + "SODIMM_74", + "SODIMM_93", + "", + ""; +}; + +&gpio4 { + gpio-line-names = "SODIMM_98", + "SODIMM_99", + "SODIMM_100", + "SODIMM_101", + "SODIMM_45", + "SODIMM_43", + "SODIMM_105", + "SODIMM_106", + "SODIMM_107", + "SODIMM_108", + "SODIMM_104", + "SODIMM_103", + "SODIMM_115", + "SODIMM_114", + "SODIMM_113", + "SODIMM_112", + "SODIMM_109", + "SODIMM_110", + "SODIMM_95", + "SODIMM_96", + "SODIMM_97", + "ENET_nINT", + "ENET_nRST", + "SODIMM_84", + "SODIMM_87", + "SODIMM_86", + "SODIMM_85", + "SODIMM_83", + "", + "SODIMM_66", + "SODIMM_65", + ""; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "SODIMM_76", + "SODIMM_81", + "SODIMM_146", + "SODIMM_48", + "SODIMM_46", + "SODIMM_47", + "SODIMM_44", + "SODIMM_49", + "", + "SODIMM_70", + "SODIMM_69", + "PMIC_SCL", + "PMIC_SDA", + "SODIMM_41", + "SODIMM_40", + "SODIMM_148", + "SODIMM_149", + "SODIMM_150", + "SODIMM_151", + "SODIMM_60", + "SODIMM_59", + "SODIMM_64", + "SODIMM_63", + "SODIMM_62", + "SODIMM_61", + "SODIMM_68", + "SODIMM_67", + "", + ""; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_pmic>; + pinctrl-names = "default"; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <805000>; + regulator-name = "vdd-soc"; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <805000>; + regulator-name = "vdd-core"; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_3v3: BUCK4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3"; + }; + + reg_nvcc_nand: BUCK5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "nvcc-nand"; + }; + + reg_nvcc_dram: BUCK6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "nvcc-dram"; + }; + + reg_snvs_1v8: LDO1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "snvs-1v8"; + }; + + ldo2_reg: LDO2 { + regulator-always-on; + regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <800000>; + regulator-name = "LDO2"; + }; + + reg_vdda_1v8: LDO3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vdda-1v8"; + }; + + ldo4_reg: LDO4 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <800000>; + regulator-name = "LDO4"; + }; + + ldo5_reg: LDO5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "LDO5"; + }; + }; + }; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_SION) + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER + (MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + >; + }; + + pinctrl_eqos_sleep: eqos-sleep-grp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_ethphy_int_b: ethphy-int-bgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + >; + }; + + pinctrl_ethphy_rst_b: ethphy-rst-bgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 + MX8MP_I2C_DEFAULT + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 + MX8MP_I2C_DEFAULT + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 + (MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_reg_3v3_etn: reg-3v3-etngrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + MX8MP_USDHC_DATA_DEFAULT + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + (MX8MP_DSE_X2 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + (MX8MP_DSE_X6 | MX8MP_USDHC_DATA_DEFAULT) + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <200000000>; + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + vmmc-supply = <®_vdd_3v3>; + voltage-ranges = <3300 3300>; + vqmmc-supply = <®_nvcc_nand>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi index b59da91fdd04..29f080904482 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi @@ -55,6 +55,24 @@ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc { states = <3300000 0x0 1800000 0x1>; vin-supply = <&ldo5>; }; + + reg_phy_supply: regulator-phy-supply { + compatible = "regulator-fixed"; + regulator-name = "phy-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_phy_vddio: regulator-phy-vddio { + compatible = "regulator-fixed"; + regulator-name = "vddio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; &A53_0 { @@ -73,6 +91,53 @@ &A53_3 { cpu-supply = <&buck2>; }; +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100000>; + vddio-supply = <®_phy_vddio>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; + }; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -239,6 +304,27 @@ &wdog1 { &iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x10 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x150 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi index 10713c34ff39..cbf0c9a740fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -434,6 +434,8 @@ &usdhc3 { pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 568d24265ddf..12de7cf1e853 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -301,7 +301,7 @@ &gpio2 { &gpio3 { gpio-line-names = "", "", "", "", "", "", "m2_rst", "", - "", "", "", "", "", "", "m2_gpio10", "", + "", "", "", "", "", "", "m2_wdis2#", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; @@ -310,7 +310,7 @@ &gpio4 { gpio-line-names = "", "", "m2_off#", "", "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "m2_wdis#", "", "", "", "", "", + "", "", "m2_wdis1#", "", "", "", "", "", "", "", "", "", "", "", "", "rs485_en"; }; @@ -811,14 +811,14 @@ pinctrl_hog: hoggrp { MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x40000040 /* M2SKT_OFF# */ - MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */ + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS1# */ MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40000040 /* M2SKT_PIN20 */ MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000040 /* M2SKT_PIN22 */ MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x40000150 /* PCIE1_WDIS# */ MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */ MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */ - MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_GPIO10 */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000150 /* M2KST_WDIS2# */ MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */ MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */ MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 948b88cf5e9d..bb24dba7338e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -320,7 +320,10 @@ map0 { <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -350,7 +353,10 @@ map0 { <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -876,24 +882,17 @@ pgc_mediamix: power-domain@10 { pgc_vpu_g1: power-domain@11 { #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; reg = ; - clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; }; pgc_vpu_g2: power-domain@12 { #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; reg = ; - clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; - }; pgc_vpu_vc8000e: power-domain@13 { #power-domain-cells = <0>; - power-domains = <&pgc_vpumix>; reg = ; - clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; }; pgc_hdmimix: power-domain@14 { @@ -2235,6 +2234,7 @@ gpu3d: gpu@38000000 { <&clk IMX8MP_CLK_GPU_ROOT>, <&clk IMX8MP_CLK_GPU_AHB>; clock-names = "core", "shader", "bus", "reg"; + #cooling-cells = <2>; assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>, <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, @@ -2251,6 +2251,7 @@ gpu2d: gpu@38008000 { <&clk IMX8MP_CLK_GPU_ROOT>, <&clk IMX8MP_CLK_GPU_AHB>; clock-names = "core", "bus", "reg"; + #cooling-cells = <2>; assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; assigned-clock-rates = <1000000000>; @@ -2263,8 +2264,8 @@ vpu_g1: video-codec@38300000 { interrupts = ; clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; - assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; - assigned-clock-rates = <600000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>; power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>; }; @@ -2273,9 +2274,9 @@ vpu_g2: video-codec@38310000 { reg = <0x38310000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; - assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; - assigned-clock-rates = <500000000>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>, <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; + assigned-clock-rates = <700000000>, <700000000>; power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>; }; @@ -2290,9 +2291,9 @@ vpumix_blk_ctrl: blk-ctrl@38330000 { <&clk IMX8MP_CLK_VPU_G2_ROOT>, <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; clock-names = "g1", "g2", "vc8000e"; - assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>; - assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; - assigned-clock-rates = <600000000>, <600000000>; + assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>; interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>; @@ -2308,6 +2309,7 @@ npu: npu@38500000 { <&clk IMX8MP_CLK_ML_AXI>, <&clk IMX8MP_CLK_ML_AHB>; clock-names = "core", "shader", "bus", "reg"; + #cooling-cells = <2>; power-domains = <&pgc_mlmix>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso new file mode 100644 index 000000000000..ceb63c28b21a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi0.dtso @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 NXP + */ + +/dts-v1/; +/plugin/; + +#include +#include + +&i2c_mipi_csi0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c_mipi_csi0>; + pinctrl-names = "default"; + status = "okay"; + + ov5640_mipi_0: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&xtal24m>; + clock-names = "xclk"; + pinctrl-0 = <&pinctrl_mipi_csi0>; + pinctrl-names = "default"; + powerdown-gpios = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpios = <&lsio_gpio1 27 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_2v8>; + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; + + port { + ov5640_mipi_0_ep: endpoint { + bus-type = ; + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi0_in>; + }; + }; + }; +}; + +&irqsteer_csi0 { + status = "okay"; +}; + +&isi { + status = "okay"; +}; + +&mipi_csi_0 { + status = "okay"; + + ports { + port@0 { + mipi_csi0_in: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&ov5640_mipi_0_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso new file mode 100644 index 000000000000..9e6d33c0315e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek-ov5640-csi1.dtso @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 NXP + */ + +/dts-v1/; +/plugin/; + +#include +#include + +&i2c_mipi_csi1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c_mipi_csi1>; + pinctrl-names = "default"; + status = "okay"; + + ov5640_mipi_1: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&xtal24m>; + clock-names = "xclk"; + pinctrl-0 = <&pinctrl_mipi_csi1>; + pinctrl-names = "default"; + powerdown-gpios = <&lsio_gpio1 31 GPIO_ACTIVE_HIGH>; + reset-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_2v8>; + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; + + port { + ov5640_mipi_1_ep: endpoint { + bus-type = ; + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi1_in>; + }; + }; + }; +}; + +&irqsteer_csi1 { + status = "okay"; +}; + +&isi { + status = "okay"; +}; + +&mipi_csi_1 { + status = "okay"; + + ports { + port@0 { + mipi_csi1_in: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&ov5640_mipi_1_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 353f825a8ac5..95523c538135 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -32,6 +32,13 @@ memory@80000000 { reg = <0x00000000 0x80000000 0 0x40000000>; }; + xtal24m: clock-xtal24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xtal_24MHz"; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -113,6 +120,15 @@ dsp_vdev0buffer: memory@94300000 { reg = <0 0x94300000 0 0x100000>; no-map; }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0xc0000000 0 0x3c000000>; + size = <0 0x3c000000>; + linux,cma-default; + reusable; + }; }; lvds_backlight0: backlight-lvds0 { @@ -131,6 +147,72 @@ lvds_backlight1: backlight-lvds1 { default-brightness-level = <80>; }; + i2c-mux { + compatible = "i2c-mux-gpio"; + mux-gpios = <&lsio_gpio5 3 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */ + i2c-parent = <&i2c1>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + wm8960: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + AVDD-supply = <®_audio_3v3>; + DBVDD-supply = <®_audio_1v8>; + DCVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + wm8962: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + DCVDD-supply = <®_audio_1v8>; + DBVDD-supply = <®_audio_1v8>; + AVDD-supply = <®_audio_1v8>; + CPVDD-supply = <®_audio_1v8>; + MICVDD-supply = <®_audio_3v3>; + PLLVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; + }; + }; + + }; + mux-controller { compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; pinctrl-names = "default"; @@ -146,6 +228,27 @@ usb3_data_ss: endpoint { }; }; + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_2v8: regulator-2v8 { + compatible = "regulator-fixed"; + regulator-name = "2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + reg_usdhc2_vmmc: usdhc2-vmmc { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; @@ -314,6 +417,21 @@ sound-wm8960 { "Mic Jack", "MICB"; }; + sound-wm8962 { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + audio-cpu = <&sai1>; + audio-codec = <&wm8962>; + hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>; + audio-routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN1R", "AMIC", + "IN3R", "AMIC"; + }; + imx8qm-cm4-0 { compatible = "fsl,imx8qm-cm4"; clocks = <&clk_dummy>; @@ -511,26 +629,6 @@ &i2c1 { scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>; sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>; status = "okay"; - - wm8960: audio-codec@1a { - compatible = "wlf,wm8960"; - reg = <0x1a>; - clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; - clock-names = "mclk"; - assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, - <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, - <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, - <&mclkout0_lpcg IMX_LPCG_CLK_0>; - assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>; - wlf,shared-lrclk; - wlf,hp-cfg = <2 2 3>; - wlf,gpio-cfg = <1 3>; - AVDD-supply = <®_audio_3v3>; - DBVDD-supply = <®_audio_1v8>; - DCVDD-supply = <®_audio_1v8>; - SPKVDD1-supply = <®_audio_5v>; - SPKVDD2-supply = <®_audio_5v>; - }; }; &i2c1_lvds0 { @@ -815,6 +913,20 @@ IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x0600004c >; }; + pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp { + fsl,pins = < + IMX8QM_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL 0xc2000020 + IMX8QM_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020 + >; + }; + + pinctrl_i2c_mipi_csi1: i2c-mipi-csi1grp { + fsl,pins = < + IMX8QM_MIPI_CSI1_I2C0_SCL_MIPI_CSI1_I2C0_SCL 0xc2000020 + IMX8QM_MIPI_CSI1_I2C0_SDA_MIPI_CSI1_I2C0_SDA 0xc2000020 + >; + }; + pinctrl_i2c0: i2c0grp { fsl,pins = < IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x06000021 @@ -1008,6 +1120,22 @@ IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA 0xc600004c >; }; + pinctrl_mipi_csi0: mipi-csi0grp { + fsl,pins = < + IMX8QM_MIPI_CSI0_GPIO0_00_LSIO_GPIO1_IO27 0xC0000041 + IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28 0xC0000041 + IMX8QM_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT 0xC0000041 + >; + }; + + pinctrl_mipi_csi1: mipi-csi1grp { + fsl,pins = < + IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30 0xC0000041 + IMX8QM_MIPI_CSI1_GPIO0_01_LSIO_GPIO1_IO31 0xC0000041 + IMX8QM_MIPI_CSI1_MCLK_OUT_MIPI_CSI1_ACM_MCLK_OUT 0xC0000041 + >; + }; + pinctrl_pciea: pcieagrp { fsl,pins = < IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28 0x04000021 diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi index 2bbdacb1313f..4b7e685daa02 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi @@ -3,6 +3,31 @@ * Copyright 2021 NXP */ +&isi { + compatible = "fsl,imx8qm-isi"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + + isi_in_2: endpoint { + remote-endpoint = <&mipi_csi0_out>; + }; + }; + + port@3 { + reg = <3>; + + isi_in_3: endpoint { + remote-endpoint = <&mipi_csi1_out>; + }; + }; + }; +}; + &jpegdec { compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; }; @@ -10,3 +35,57 @@ &jpegdec { &jpegenc { compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc"; }; + +&mipi_csi_0 { + compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi0_out: endpoint { + remote-endpoint = <&isi_in_2>; + }; + }; + }; +}; + +&mipi_csi_1 { + compatible = "fsl,imx8qm-mipi-csi2", "fsl,imx8qxp-mipi-csi2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi1_out: endpoint { + remote-endpoint = <&isi_in_3>; + }; + }; + }; +}; + +&pi0_ipg_lpcg { + status = "disabled"; +}; + +&pi0_misc_lpcg { + status = "disabled"; +}; + +&pi0_pxl_lpcg { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 6fa31bc9ece8..827e1365b5da 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -333,6 +333,11 @@ iomuxc: pinctrl { compatible = "fsl,imx8qm-iomuxc"; }; + scu_reset: reset-controller { + compatible = "fsl,imx-scu-reset"; + #reset-cells = <1>; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; @@ -356,6 +361,11 @@ tsens: thermal-sensor { compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; #thermal-sensor-cells = <1>; }; + + watchdog { + compatible = "fsl,imx8qm-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; thermal-zones { @@ -612,6 +622,7 @@ vpu_dsp: dsp@556e8000 { }; /* sorted in register address */ + #include "imx8-ss-security.dtsi" #include "imx8-ss-cm41.dtsi" #include "imx8-ss-audio.dtsi" #include "imx8-ss-vpu.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso new file mode 100644 index 000000000000..dd65ed8bb37c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek-ov5640-csi.dtso @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2024 NXP + */ +/dts-v1/; +/plugin/; + +#include +#include + +&i2c_mipi_csi0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-0 = <&pinctrl_i2c_mipi_csi0>; + pinctrl-names = "default"; + status = "okay"; + + ov5640_mipi: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&xtal24m>; + clock-names = "xclk"; + pinctrl-0 = <&pinctrl_mipi_csi0>; + pinctrl-names = "default"; + powerdown-gpios = <&lsio_gpio3 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&lsio_gpio3 8 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_2v8>; + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; + + port { + ov5640_mipi_ep: endpoint { + bus-type = ; + data-lanes = <1 2>; + remote-endpoint = <&mipi_csi0_in>; + }; + }; + }; +}; + +&irqsteer_csi0 { + status = "okay"; +}; + +&isi { + status = "okay"; +}; + +&mipi_csi_0 { + status = "okay"; + + ports { + port@0 { + mipi_csi0_in: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&ov5640_mipi_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index c93d123670bd..e54be7f649ff 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -64,6 +64,92 @@ usb3_data_ss: endpoint { }; }; + i2c-mux { + compatible = "i2c-mux-gpio"; + mux-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; /* needs to be an unused GPIO */ + i2c-parent = <&cm40_i2c>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + wm8960: audio-codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + AVDD-supply = <®_audio_3v3>; + DBVDD-supply = <®_audio_1v8>; + DCVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + wm8962: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, + <49152000>, + <12288000>, + <12288000>; + DCVDD-supply = <®_audio_1v8>; + DBVDD-supply = <®_audio_1v8>; + AVDD-supply = <®_audio_1v8>; + CPVDD-supply = <®_audio_1v8>; + MICVDD-supply = <®_audio_3v3>; + PLLVDD-supply = <®_audio_1v8>; + SPKVDD1-supply = <®_audio_5v>; + SPKVDD2-supply = <®_audio_5v>; + }; + }; + }; + + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_2v8: regulator-2v8 { + compatible = "regulator-fixed"; + regulator-name = "2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + reg_pcieb: regulator-pcie { compatible = "regulator-fixed"; regulator-max-microvolt = <3300000>; @@ -187,6 +273,15 @@ dsp_vdev0buffer: memory@94300000 { no-map; }; + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0xc0000000 0 0x3c000000>; + size = <0 0x3c000000>; + linux,cma-default; + reusable; + }; + gpu_reserved: memory@880000000 { no-map; reg = <0x8 0x80000000 0 0x10000000>; @@ -248,6 +343,21 @@ sound-wm8960 { "LINPUT1", "Mic Jack", "Mic Jack", "MICB"; }; + + sound-wm8962 { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + audio-cpu = <&sai1>; + audio-codec = <&wm8962>; + hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>; + audio-routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC", + "IN1R", "AMIC"; + }; }; &amix { @@ -427,29 +537,6 @@ &cm40_i2c { sda-gpios = <&lsio_gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; - wm8960: audio-codec@1a { - compatible = "wlf,wm8960"; - reg = <0x1a>; - clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; - clock-names = "mclk"; - assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, - <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, - <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, - <&mclkout0_lpcg IMX_LPCG_CLK_0>; - assigned-clock-rates = <786432000>, - <49152000>, - <12288000>, - <12288000>; - wlf,shared-lrclk; - wlf,hp-cfg = <2 2 3>; - wlf,gpio-cfg = <1 3>; - AVDD-supply = <®_audio_3v3>; - DBVDD-supply = <®_audio_1v8>; - DCVDD-supply = <®_audio_1v8>; - SPKVDD1-supply = <®_audio_5v>; - SPKVDD2-supply = <®_audio_5v>; - }; - pca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; @@ -780,6 +867,13 @@ IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 >; }; + pinctrl_i2c_mipi_csi0: i2c-mipi-csi0grp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL 0xc2000020 + IMX8QXP_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020 + >; + }; + pinctrl_ioexp_rst: ioexprstgrp { fsl,pins = < IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 @@ -820,6 +914,14 @@ IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 >; }; + pinctrl_mipi_csi0: mipi-csi0grp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07 0xC0000041 + IMX8QXP_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08 0xC0000041 + IMX8QXP_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT 0xC0000041 + >; + }; + pinctrl_pcieb: pcieagrp { fsl,pins = < IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x06000021 diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi index 3a087317591d..232cf25dadfc 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi @@ -4,6 +4,86 @@ * Dong Aisheng */ +&csi1_pxl_lpcg { + status = "disabled"; +}; + +&csi1_core_lpcg { + status = "disabled"; +}; + +&csi1_esc_lpcg { + status = "disabled"; +}; + +&gpio0_mipi_csi1 { + status = "disabled"; +}; + +&i2c_mipi_csi1 { + status = "disabled"; +}; + +&irqsteer_csi1 { + status = "disabled"; +}; + +&isi { + compatible = "fsl,imx8qxp-isi"; + reg = <0x58100000 0x60000>; + interrupts = , + , + , + , + , + ; + clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>, + <&pdma1_lpcg IMX_LPCG_CLK_0>, + <&pdma2_lpcg IMX_LPCG_CLK_0>, + <&pdma3_lpcg IMX_LPCG_CLK_0>, + <&pdma4_lpcg IMX_LPCG_CLK_0>, + <&pdma5_lpcg IMX_LPCG_CLK_0>; + clock-names = "per0", "per1", "per2", "per3", "per4", "per5"; + power-domains = <&pd IMX_SC_R_ISI_CH0>, + <&pd IMX_SC_R_ISI_CH1>, + <&pd IMX_SC_R_ISI_CH2>, + <&pd IMX_SC_R_ISI_CH3>, + <&pd IMX_SC_R_ISI_CH4>, + <&pd IMX_SC_R_ISI_CH5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + + isi_in_2: endpoint { + remote-endpoint = <&mipi_csi0_out>; + }; + }; + }; +}; + +&mipi_csi_0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_csi0_out: endpoint { + remote-endpoint = <&isi_in_2>; + }; + }; + }; +}; + &jpegdec { compatible = "nxp,imx8qxp-jpgdec"; }; @@ -11,3 +91,7 @@ &jpegdec { &jpegenc { compatible = "nxp,imx8qxp-jpgenc"; }; + +&mipi_csi_1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi new file mode 100644 index 000000000000..15f1239dab24 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-security.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2025 Actia Nordic AB + */ + +&crypto { + compatible = "fsl,imx8qxp-caam", "fsl,sec-v4.0"; +}; + +&sec_jr2 { + compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring"; +}; + +&sec_jr3 { + compatible = "fsl,imx8qxp-job-ring", "fsl,sec-v4.0-job-ring"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 05138326f0a5..9e46e16a8dc0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -241,6 +241,11 @@ scu_key: keys { status = "disabled"; }; + scu_reset: reset-controller { + compatible = "fsl,imx-scu-reset"; + #reset-cells = <1>; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; @@ -321,6 +326,7 @@ map0 { /* sorted in register address */ #include "imx8-ss-img.dtsi" #include "imx8-ss-vpu.dtsi" + #include "imx8-ss-security.dtsi" #include "imx8-ss-cm40.dtsi" #include "imx8-ss-gpu0.dtsi" #include "imx8-ss-adma.dtsi" @@ -332,6 +338,7 @@ map0 { #include "imx8qxp-ss-img.dtsi" #include "imx8qxp-ss-vpu.dtsi" +#include "imx8qxp-ss-security.dtsi" #include "imx8qxp-ss-adma.dtsi" #include "imx8qxp-ss-conn.dtsi" #include "imx8qxp-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 2562a35286c2..13b01f3aa2a4 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -686,6 +686,7 @@ gpioe: gpio@2d000000 { <&pcc4 IMX8ULP_CLK_PCTLE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 32 24>; + ngpios = <24>; }; gpiof: gpio@2d010000 { @@ -701,6 +702,7 @@ gpiof: gpio@2d010000 { <&pcc4 IMX8ULP_CLK_PCTLF>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 64 32>; + ngpios = <32>; }; per_bridge5: bus@2d800000 { @@ -855,6 +857,7 @@ gpiod: gpio@2e200000 { <&pcc5 IMX8ULP_CLK_RGPIOD>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc1 0 0 24>; + ngpios = <24>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index 8491eb53120e..e24e12f04526 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -95,6 +95,15 @@ reg_can2_standby: regulator-can2-standby { gpio = <&adp5585 6 GPIO_ACTIVE_LOW>; }; + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -107,6 +116,28 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; + reg_usdhc3_vmmc: regulator-usdhc3 { + compatible = "regulator-fixed"; + regulator-name = "WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>; + /* + * IW612 wifi chip needs more delay than other wifi chips to complete + * the host interface initialization after power up, otherwise the + * internal state of IW612 may be unstable, resulting in the failure of + * the SDIO3.0 switch voltage. + */ + startup-delay-us = <20000>; + enable-active-high; + }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>; + }; + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&adp5585 0 100000 0>; @@ -217,10 +248,10 @@ mdio { ethphy1: ethernet-phy@1 { reg = <1>; - eee-broken-1000t; reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <80000>; + realtek,clkout-disable; }; }; }; @@ -245,6 +276,7 @@ ethphy2: ethernet-phy@2 { reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <80000>; + realtek,clkout-disable; }; }; }; @@ -493,6 +525,10 @@ &lpuart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; }; &micfil { @@ -594,6 +630,21 @@ &usdhc2 { no-mmc; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>; + mmc-pwrseq = <&usdhc3_pwrseq>; + vmmc-supply = <®_usdhc3_vmmc>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + &wdog3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -622,13 +673,13 @@ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e - MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e - MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e >; }; @@ -660,24 +711,17 @@ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e - MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x58e MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e - MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e >; }; - pinctrl_lpi2c3: lpi2c3grp { - fsl,pins = < - MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e - MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e - >; - }; - pinctrl_fec_sleep: fecsleepgrp { fsl,pins = < MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e @@ -935,6 +979,59 @@ MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x51e >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grpsleepgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e + MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e + >; + }; + + pinctrl_usdhc3_wlan: usdhc3wlangrp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts index f556b6569a68..c5d86b54ad33 100644 --- a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts @@ -99,6 +99,15 @@ reg_can2_en: regulator-can2-en { enable-active-high; }; + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -111,6 +120,23 @@ reg_usdhc2_vmmc: regulator-usdhc2 { off-on-delay-us = <12000>; }; + reg_usdhc3_vmmc: regulator-usdhc3 { + compatible = "regulator-fixed"; + regulator-name = "WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>; + /* + * IW612 wifi chip needs more delay than other wifi chips to complete + * the host interface initialization after power up, otherwise the + * internal state of IW612 may be unstable, resulting in the failure of + * the SDIO3.0 switch voltage. + */ + startup-delay-us = <20000>; + enable-active-high; + }; + reg_vdd_12v: regulator-vdd-12v { compatible = "regulator-fixed"; regulator-name = "reg_vdd_12v"; @@ -126,6 +152,11 @@ reg_vref_1v8: regulator-adc-vref { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>; + }; }; &adc1 { @@ -366,6 +397,21 @@ &usdhc2 { status = "okay"; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>; + mmc-pwrseq = <&usdhc3_pwrseq>; + vmmc-supply = <®_usdhc3_vmmc>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + &wdog3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -552,6 +598,59 @@ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grpsleepgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e + MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e + >; + }; + + pinctrl_usdhc3_wlan: usdhc3wlangrp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts index 75e67115d52f..f6f8d105b737 100644 --- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts @@ -82,6 +82,15 @@ reg_audio_pwr: regulator-audio-pwr { enable-active-high; }; + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_rpi_3v3: regulator-rpi { compatible = "regulator-fixed"; regulator-name = "VDD_RPI_3V3"; @@ -103,6 +112,23 @@ reg_usdhc2_vmmc: regulator-usdhc2 { off-on-delay-us = <12000>; }; + reg_usdhc3_vmmc: regulator-usdhc3 { + compatible = "regulator-fixed"; + regulator-name = "WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>; + /* + * IW612 wifi chip needs more delay than other wifi chips to complete + * the host interface initialization after power up, otherwise the + * internal state of IW612 may be unstable, resulting in the failure of + * the SDIO3.0 switch voltage. + */ + startup-delay-us = <20000>; + enable-active-high; + }; + sound-bt-sco { compatible = "simple-audio-card"; simple-audio-card,name = "bt-sco-audio"; @@ -151,6 +177,11 @@ sound-wm8962 { "IN3R", "AMIC", "IN1R", "AMIC"; }; + + usdhc3_pwrseq: usdhc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>; + }; }; &adc1 { @@ -184,7 +215,6 @@ mdio { ethphy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - eee-broken-1000t; reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <80000>; @@ -265,6 +295,11 @@ rtc@53 { interrupt-parent = <&pcal6524>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; + + inertial-meter@6a { + compatible = "st,lsm6dso"; + reg = <0x6a>; + }; }; &lpi2c2 { @@ -380,6 +415,17 @@ &lpuart1 { /* console */ status = "okay"; }; +&lpuart5 { + /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + &micfil { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pdm>; @@ -458,6 +504,20 @@ &usdhc2 { status = "okay"; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + mmc-pwrseq = <&usdhc3_pwrseq>; + vmmc-supply = <®_usdhc3_vmmc>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + &wdog3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -650,6 +710,42 @@ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso new file mode 100644 index 000000000000..7381b87444e8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-peb-wlbt-07.dtso @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser + */ + +/dts-v1/; +/plugin/; + +#include +#include "imx93-pinfunc.h" + +&{/} { + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; +}; + +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +/* + * NOTE: When uSDHC3 port is multiplexed on GPIO_IO[27:22] pads, it only + * supports 50 MHz mode, due to introduction of potential variations in + * trace impedance, drive strength, and timing skew. Refer to i.MX 93 + * Application Processors Data Sheet, Rev. 3, page 60 for more details. + */ +&usdhc3 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>; + pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>; + mmc-pwrseq = <&usdhc3_pwrseq>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + wakeup-source; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_GPIO_IO22__USDHC3_CLK 0x179e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000178e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e + >; + }; + + pinctrl_usdhc3_sleep: usdhc3sleepgrp { + fsl,pins = < + MX93_PAD_GPIO_IO22__USDHC3_CLK 0x31e + MX93_PAD_SD3_CMD__USDHC3_CMD 0x31e + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x31e + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x31e + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x31e + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x31e + >; + }; + + pinctrl_wlbt: wlbtgrp { + fsl,pins = < + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e /* WAKE_DEV */ + MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x31e /* WAKE_HOST */ + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e /* PDn */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts index 7e9d031a2f0e..475913cf0cb9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts @@ -18,7 +18,6 @@ / { "fsl,imx93"; aliases { - ethernet0 = &fec; ethernet1 = &eqos; rtc0 = &i2c_rtc; rtc1 = &bbnsm_rtc; @@ -54,18 +53,10 @@ reg_vcc_1v8: regulator-vcc-1v8 { regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; }; - - reg_vref_1v8: regulator-adc-vref { - compatible = "regulator-fixed"; - regulator-name = "VREF_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; }; /* ADC */ &adc1 { - vref-supply = <®_vref_1v8>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso new file mode 100644 index 000000000000..a20898734741 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Andrej Picej + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include "imx93-pinfunc.h" + +&{/} { + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + button-s2 { + label = "sleep"; + linux,code = ; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>; + + user-led2 { + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e + >; + }; + + pinctrl_user_leds: userledsgrp { + fsl,pins = < + MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso new file mode 100644 index 000000000000..a7285f009566 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-wlbt-05.dtso @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Andrej Picej + */ + +/dts-v1/; +/plugin/; + +#include +#include "imx93-pinfunc.h" + +&{/} { + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <60>; + reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; +}; + +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + }; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wlbt>; + pinctrl-1 = <&pinctrl_usdhc3_sleep>, <&pinctrl_wlbt>; + mmc-pwrseq = <&usdhc3_pwrseq>; + bus-width = <4>; + non-removable; + no-1-8-v; + status = "okay"; + + brmcf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_GPIO_IO22__USDHC3_CLK 0x179e + MX93_PAD_GPIO_IO23__USDHC3_CMD 0x4000139e + MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x4000139e + MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x4000139e + MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x4000139e + MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x4000139e + >; + }; + + pinctrl_usdhc3_sleep: usdhc3sleepgrp { + fsl,pins = < + MX93_PAD_GPIO_IO22__USDHC3_CLK 0x31e + MX93_PAD_GPIO_IO23__USDHC3_CMD 0x31e + MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x31e + MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x31e + MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x31e + MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x31e + >; + }; + + pinctrl_wlbt: wlbtgrp { + fsl,pins = < + MX93_PAD_ENET1_RD3__GPIO4_IO13 0x31e /* BT ENABLE */ + MX93_PAD_ENET1_TXC__GPIO4_IO07 0x31e /* WLAN ENABLE */ + MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e /* HOST WAKEUP */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts index 0c55b749c834..6f1374f5757f 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts @@ -18,6 +18,7 @@ /{ "fsl,imx93"; aliases { + ethernet1 = &eqos; rtc0 = &i2c_rtc; rtc1 = &bbnsm_rtc; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso new file mode 100644 index 000000000000..23bede7833f8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-rpmsg.dtso @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser + */ + +/dts-v1/; +/plugin/; + +&{/} { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + rsc_table: rsc-table@2021e000 { + reg = <0 0x2021e000 0 0x1000>; + no-map; + }; + + vdev0vring0: vdev0vring0@a4000000 { + reg = <0 0xa4000000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@a4008000 { + reg = <0 0xa4008000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@a4010000 { + reg = <0 0xa4010000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@a4018000 { + reg = <0 0xa4018000 0 0x8000>; + no-map; + }; + + vdevbuffer: vdevbuffer@a4020000 { + compatible = "shared-dma-pool"; + reg = <0 0xa4020000 0 0x100000>; + no-map; + }; + }; +}; + +&cm33 { + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&mu1 0 1>, + <&mu1 1 1>, + <&mu1 3 1>; + memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>, + <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>; + status = "okay"; +}; + +&mu1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi index 22dbcc89e311..c6f5aa38ebf9 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi @@ -16,6 +16,10 @@ /{ model = "PHYTEC phyCORE-i.MX93"; compatible = "phytec,imx93-phycore-som", "fsl,imx93"; + aliases { + ethernet0 = &fec; + }; + reserved-memory { ranges; #address-cells = <2>; @@ -42,6 +46,19 @@ led-0 { linux,default-trigger = "heartbeat"; }; }; + + reg_vdda_1v8: regulator-vdda-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&buck5>; + }; +}; + +/* ADC */ +&adc1 { + vref-supply = <®_vdda_1v8>; }; /* Ethernet */ @@ -178,6 +195,9 @@ &usdhc1 { /* Watchdog */ &wdog3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; status = "okay"; }; @@ -266,4 +286,10 @@ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013be MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi index 2cabdae24227..82914ca148d3 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* - * Copyright (c) 2022 TQ-Systems GmbH , + * Copyright (c) 2022-2025 TQ-Systems GmbH , * D-82229 Seefeld, Germany. * Author: Markus Niebel */ @@ -11,6 +11,12 @@ /{ model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM"; compatible = "tq,imx93-tqma9352", "fsl,imx93"; + memory@80000000 { + device_type = "memory"; + /* our minimum RAM config will be 1024 MiB */ + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -70,15 +76,6 @@ partitions { }; }; -&gpio1 { - pmic-irq-hog { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - input; - line-name = "PMIC_IRQ#"; - }; -}; - &lpi2c1 { clock-frequency = <400000>; pinctrl-names = "default", "sleep"; @@ -110,11 +107,11 @@ buck1: BUCK1 { regulator-ramp-delay = <3125>; }; - /* V_DDRQ - 1.1 LPDDR4 or 0.6 LPDDR4X */ + /* V_DDRQ - 0.6 V for LPDDR4X */ buck2: BUCK2 { regulator-name = "BUCK2"; regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <600000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi index 783938245e4f..a5f09487d803 100644 --- a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi @@ -19,26 +19,19 @@ mmc_pwrseq: mmc-pwrseq { reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ }; - - reg_eqos_phy: regulator-eqos-phy { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_eqos_phy>; - regulator-name = "eth_phy_pwr"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <100000>; - regulator-always-on; - }; }; &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; + /* + * The required RGMII TX and RX 2ns delays are implemented directly + * in hardware via passive delay elements on the SOM PCB. + * No delay configuration is needed in software via PHY driver. + */ phy-mode = "rgmii"; phy-handle = <ðphy0>; + snps,clk-csr = <5>; status = "okay"; mdio { @@ -51,6 +44,28 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; eee-broken-1000t; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100000>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + linux,default-trigger = "netdev"; + }; + }; }; }; }; @@ -75,14 +90,15 @@ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e - MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e - MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 64cd0776b43d..8a7f1cd76c76 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -297,7 +297,8 @@ edma1: dma-controller@44000000 { , // 27: TMP2 CH1/CH3 , // 28: TMP2 Overflow , // 29: PDM - ; // 30: ADC1 + , // 30: ADC1 + ; // err clocks = <&clk IMX93_CLK_EDMA1_GATE>; clock-names = "dma"; }; @@ -667,7 +668,8 @@ edma2: dma-controller@42000000 { , , , - ; + , + ; clocks = <&clk IMX93_CLK_EDMA2_GATE>; clock-names = "dma"; }; @@ -1197,6 +1199,7 @@ gpio2: gpio@43810000 { <&clk IMX93_CLK_GPIO2_GATE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 4 30>; + ngpios = <30>; }; gpio3: gpio@43820000 { @@ -1213,6 +1216,7 @@ gpio3: gpio@43820000 { clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>, <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; + ngpios = <32>; }; gpio4: gpio@43830000 { @@ -1228,6 +1232,7 @@ gpio4: gpio@43830000 { <&clk IMX93_CLK_GPIO4_GATE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; + ngpios = <30>; }; gpio1: gpio@47400000 { @@ -1243,6 +1248,7 @@ gpio1: gpio@47400000 { <&clk IMX93_CLK_GPIO1_GATE>; clock-names = "gpio", "port"; gpio-ranges = <&iomuxc 0 92 16>; + ngpios = <16>; }; ocotp: efuse@47510000 { diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi index 3661ea48d7d2..44dee2cbd42d 100644 --- a/arch/arm64/boot/dts/freescale/imx94.dtsi +++ b/arch/arm64/boot/dts/freescale/imx94.dtsi @@ -108,6 +108,16 @@ scmi_misc: protocol@84 { }; }; + mqs1: mqs1 { + compatible = "fsl,imx943-aonmix-mqs"; + status = "disabled"; + }; + + mqs2: mqs2 { + compatible = "fsl,imx943-wakeupmix-mqs"; + status = "disabled"; + }; + pmu { compatible = "arm,cortex-a55-pmu"; interrupts = ; @@ -785,6 +795,7 @@ gpio2: gpio@43810000 { #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 4 32>; + ngpios = <32>; }; gpio3: gpio@43820000 { @@ -797,6 +808,7 @@ gpio3: gpio@43820000 { #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 36 26>; + ngpios = <26>; }; gpio4: gpio@43840000 { @@ -810,6 +822,7 @@ gpio4: gpio@43840000 { gpio-controller; gpio-ranges = <&scmi_iomuxc 0 62 4>, <&scmi_iomuxc 4 0 4>, <&scmi_iomuxc 8 140 12>, <&scmi_iomuxc 20 164 12>; + ngpios = <32>; }; gpio5: gpio@43850000 { @@ -822,6 +835,7 @@ gpio5: gpio@43850000 { #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 108 32>; + ngpios = <32>; }; gpio6: gpio@43860000 { @@ -834,6 +848,7 @@ gpio6: gpio@43860000 { #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 66 32>; + ngpios = <32>; }; gpio7: gpio@43870000 { @@ -846,6 +861,8 @@ gpio7: gpio@43870000 { #gpio-cells = <2>; gpio-controller; gpio-ranges = <&scmi_iomuxc 0 98 10>, <&scmi_iomuxc 16 152 12>; + gpio-reserved-ranges = <10 6>; + ngpios = <28>; }; aips1: bus@44000000 { @@ -1028,6 +1045,13 @@ flexcan1: can@443a0000 { compatible = "fsl,imx94-flexcan", "fsl,imx95-flexcan"; reg = <0x443a0000 0x10000>; interrupts = ; + clocks = <&scmi_clk IMX94_CLK_BUSAON>, + <&scmi_clk IMX94_CLK_CAN1>; + clock-names = "ipg", "per"; + assigned-clocks = <&scmi_clk IMX94_CLK_CAN1>; + assigned-clock-parents = <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>; + assigned-clock-rates = <80000000>; + fsl,clk-source = /bits/ 8 <0>; status = "disabled"; }; @@ -1045,6 +1069,26 @@ sai1: sai@443b0000 { status = "disabled"; }; + micfil: micfil@44520000 { + compatible = "fsl,imx943-micfil"; + reg = <0x44520000 0x10000>; + interrupts = , + , + , + ; + clocks = <&scmi_clk IMX94_CLK_BUSAON>, + <&scmi_clk IMX94_CLK_PDM>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>, + <&scmi_clk IMX94_CLK_AUDIOPLL2>, + <&dummy>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&edma1 6 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>; + dma-names = "rx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + adc1: adc@44530000 { compatible = "nxp,imx94-adc", "nxp,imx93-adc"; reg = <0x44530000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts index cc8f3e6a1789..c8c3eff9df1a 100644 --- a/arch/arm64/boot/dts/freescale/imx943-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts @@ -12,15 +12,28 @@ / { model = "NXP i.MX943 EVK board"; aliases { + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c5 = &lpi2c6; mmc0 = &usdhc1; mmc1 = &usdhc2; serial0 = &lpuart1; }; + bt_sco_codec: bt-sco-codec { + compatible = "linux,bt-sco"; + #sound-dai-cells = <1>; + }; + chosen { stdout-path = &lpuart1; }; + dmic: dmic { + compatible = "dmic-codec"; + #sound-dai-cells = <0>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; off-on-delay-us = <12000>; @@ -33,6 +46,15 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; + reg_audio_pwr: regulator-wm8962-pwr { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "audio-pwr"; + gpio = <&pcal6416_i2c3_u171 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reserved-memory { ranges; #address-cells = <2>; @@ -47,19 +69,429 @@ linux,cma { }; }; + sound-bt-sco { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-inversion; + simple-audio-card,bitclock-master = <&btcpu>; + simple-audio-card,format = "dsp_a"; + simple-audio-card,frame-master = <&btcpu>; + simple-audio-card,name = "bt-sco-audio"; + + simple-audio-card,codec { + sound-dai = <&bt_sco_codec 1>; + }; + + btcpu: simple-audio-card,cpu { + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + sound-dai = <&sai3>; + }; + }; + + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + format = "i2s"; + link-name = "micfil hifi"; + + codec { + sound-dai = <&dmic>; + }; + + cpu { + sound-dai = <&micfil>; + }; + }; + }; + + sound-wm8962 { + compatible = "fsl,imx-audio-wm8962"; + audio-codec = <&wm8962>; + audio-cpu = <&sai1>; + audio-routing = "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC", + "IN1R", "AMIC"; + hp-det-gpio = <&pcal6416_i2c3_u48 14 GPIO_ACTIVE_HIGH>; + model = "wm8962-audio"; + }; + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; device_type = "memory"; }; }; +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-names = "default"; + status = "okay"; + + pca9670_i2c3: gpio@23 { + compatible = "nxp,pca9670"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + }; + + pca9548_i2c3: i2c-mux@77 { + compatible = "nxp,pca9548"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + wm8962: codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&scmi_clk IMX94_CLK_SAI1>; + AVDD-supply = <®_audio_pwr>; + CPVDD-supply = <®_audio_pwr>; + DBVDD-supply = <®_audio_pwr>; + DCVDD-supply = <®_audio_pwr>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + MICVDD-supply = <®_audio_pwr>; + PLLVDD-supply = <®_audio_pwr>; + SPKVDD1-supply = <®_audio_pwr>; + SPKVDD2-supply = <®_audio_pwr>; + }; + }; + + i2c@5 { + reg = <5>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6416_i2c3_u46: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + + sd-card-on-hog { + gpios = <13 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + }; + + pcal6416_i2c3_u171: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + + audio-pwren-hog { + gpios = <12 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + + mqs-mic-sel-hog { + gpios = <11 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-low; + }; + }; + }; + + i2c@6 { + reg = <6>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6416_i2c3_u48: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + pinctrl-0 = <&pinctrl_ioexpander_int>; + pinctrl-names = "default"; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6408_i2c3_u172: gpio@20 { + compatible = "nxp,pcal6408"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio3>; + /* shared int pin with u48 */ + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; +}; + +&lpi2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lpi2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c6>; + pinctrl-names = "default"; + status = "okay"; + + pca9544_i2c6: i2c-mux@77 { + compatible = "nxp,pca9544"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6416_i2c6_u50: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6408_i2c6_u170: gpio@20 { + compatible = "nxp,pcal6408"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + pinctrl-0 = <&pinctrl_ioexpander_int2>; + pinctrl-names = "default"; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pcal6416_i2c6_u44: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + + /* pdm selection */ + can-pdm-sel-hog { + gpios = <12 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-low; + }; + + sai3-sel-hog { + gpios = <11 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + + /* eMMC IOMUX selection */ + sd1-sel-hog { + gpios = <0 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + + /* SD card IOMUX selection */ + sd2-sel-hog { + gpios = <1 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + }; + }; + }; +}; + &lpuart1 { pinctrl-0 = <&pinctrl_uart1>; pinctrl-names = "default"; status = "okay"; }; +&micfil { + assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>, + <&scmi_clk IMX94_CLK_AUDIOPLL2>, + <&scmi_clk IMX94_CLK_PDM>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <49152000>; + pinctrl-0 = <&pinctrl_pdm>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sai1 { + assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>, + <&scmi_clk IMX94_CLK_AUDIOPLL2>, + <&scmi_clk IMX94_CLK_SAI1>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + pinctrl-0 = <&pinctrl_sai1>; + pinctrl-names = "default"; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&sai3 { + assigned-clocks = <&scmi_clk IMX94_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>, + <&scmi_clk IMX94_CLK_AUDIOPLL2>, + <&scmi_clk IMX94_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX94_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + pinctrl-0 = <&pinctrl_sai3>; + pinctrl-names = "default"; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &scmi_iomuxc { + + pinctrl_ioexpander_int2: ioexpanderint2grp { + fsl,pins = < + IMX94_PAD_CCM_CLKO4__GPIO4_IO3 0x31e + >; + }; + + pinctrl_ioexpander_int: ioexpanderintgrp { + fsl,pins = < + IMX94_PAD_GPIO_IO45__GPIO3_IO13 0x31e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + IMX94_PAD_GPIO_IO16__LPI2C3_SDA 0x40000b9e + IMX94_PAD_GPIO_IO17__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = < + IMX94_PAD_GPIO_IO18__LPI2C4_SDA 0x40000b9e + IMX94_PAD_GPIO_IO19__LPI2C4_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c6: lpi2c6grp { + fsl,pins = < + IMX94_PAD_GPIO_IO29__LPI2C6_SDA 0x40000b9e + IMX94_PAD_GPIO_IO28__LPI2C6_SCL 0x40000b9e + >; + }; + + pinctrl_pdm: pdmgrp { + fsl,pins = < + IMX94_PAD_PDM_CLK__PDM_CLK 0x31e + IMX94_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 0x31e + IMX94_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + IMX94_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e + IMX94_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e + IMX94_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x31e + IMX94_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x31e + IMX94_PAD_I2C2_SDA__SAI1_MCLK 0x31e + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + IMX94_PAD_GPIO_IO42__SAI3_TX_BCLK 0x31e + IMX94_PAD_GPIO_IO56__SAI3_TX_SYNC 0x31e + IMX94_PAD_GPIO_IO46__SAI3_RX_DATA0 0x31e + IMX94_PAD_GPIO_IO47__SAI3_TX_DATA0 0x31e + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < IMX94_PAD_UART1_TXD__LPUART1_TX 0x31e diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts index 9f4d0899a94d..46f6e0fbf2b0 100644 --- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts @@ -494,6 +494,14 @@ &netc_bus0 { <0x60 &its 0x66 0x1>, //ENETC1 VF1 <0x80 &its 0x64 0x1>, //ENETC2 PF <0xc0 &its 0x67 0x1>; + iommu-map = <0x0 &smmu 0x20 0x1>, + <0x10 &smmu 0x21 0x1>, + <0x20 &smmu 0x22 0x1>, + <0x40 &smmu 0x23 0x1>, + <0x50 &smmu 0x25 0x1>, + <0x60 &smmu 0x26 0x1>, + <0x80 &smmu 0x24 0x1>, + <0xc0 &smmu 0x27 0x1>; }; &netc_emdio { @@ -1070,7 +1078,10 @@ usb3_data_hs: endpoint { &usb3_phy { orientation-switch; + fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>; + fsl,phy-pcs-tx-swing-full-percent = <100>; fsl,phy-tx-preemp-amp-tune-microamp = <600>; + fsl,phy-tx-vboost-level-microvolt = <1156>; status = "okay"; port { diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts index d7d845231312..2f949a0d48d2 100644 --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts @@ -77,6 +77,29 @@ linux_cma: linux,cma { }; }; + flexcan1_phy: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + max-bitrate = <1000000>; + enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>; + standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_HIGH>; + }; + + flexcan2_phy: can-phy1 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + max-bitrate = <1000000>; + enable-gpios = <&i2c6_pcal6416 4 GPIO_ACTIVE_HIGH>; + standby-gpios = <&i2c6_pcal6416 3 GPIO_ACTIVE_HIGH>; + }; + + reg_vref_1v8: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-max-microvolt = <3300000>; @@ -204,6 +227,11 @@ sound-wm8962 { }; }; +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + &enetc_port0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enetc0>; @@ -212,6 +240,20 @@ &enetc_port0 { status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + phys = <&flexcan1_phy>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + phys = <&flexcan2_phy>; + status = "okay"; +}; + &flexspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi1>; @@ -231,6 +273,37 @@ flash@0 { }; }; +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; + + adp5585: io-expander@34 { + compatible = "adi,adp5585-00", "adi,adp5585"; + reg = <0x34>; + gpio-controller; + #gpio-cells = <2>; + gpio-reserved-ranges = <5 1>; + #pwm-cells = <3>; + }; +}; + +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + status = "okay"; + + i2c3_gpio_expander_20: gpio@20 { + compatible = "nxp,pcal6408"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x20>; + vcc-supply = <®_3p3v>; + }; +}; + &lpi2c4 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -378,6 +451,24 @@ &lpuart1 { status = "okay"; }; +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "disabled"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&lpspi7 { + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi7>; + cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &micfil { #sound-dai-cells = <0>; pinctrl-names = "default"; @@ -414,10 +505,17 @@ &netc_emdio { ethphy0: ethernet-phy@1 { reg = <1>; + reset-gpios = <&i2c5_pcal6408 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; realtek,clkout-disable; }; }; +&netc_timer { + status = "okay"; +}; + &pcie0 { pinctrl-0 = <&pinctrl_pcie0>; pinctrl-names = "default"; @@ -484,6 +582,12 @@ &sai3 { status = "okay"; }; +&tpm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm3>; + status = "okay"; +}; + &usb2 { dr_mode = "host"; disable-over-current; @@ -514,7 +618,10 @@ usb3_data_hs: endpoint { }; &usb3_phy { + fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>; + fsl,phy-pcs-tx-swing-full-percent = <100>; fsl,phy-tx-preemp-amp-tune-microamp = <600>; + fsl,phy-tx-vboost-level-microvolt = <1156>; orientation-switch; status = "okay"; @@ -588,6 +695,20 @@ IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x39e + IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x39e + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + IMX95_PAD_GPIO_IO25__CAN2_TX 0x39e + IMX95_PAD_GPIO_IO27__CAN2_RX 0x39e + >; + }; + pinctrl_flexspi1: flexspi1grp { fsl,pins = < IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe @@ -628,6 +749,27 @@ IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x31e >; }; + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e + IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40000b9e + IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO00__LPI2C3_SDA 0x40000b9e + IMX95_PAD_GPIO_IO01__LPI2C3_SCL 0x40000b9e + >; + }; + pinctrl_lpi2c4: lpi2c4grp { fsl,pins = < IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e @@ -656,6 +798,15 @@ IMX95_PAD_GPIO_IO09__LPI2C7_SCL 0x40000b9e >; }; + pinctrl_lpspi7: lpspi7grp { + fsl,pins = < + IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4 0x3fe + IMX95_PAD_GPIO_IO05__LPSPI7_SIN 0x3fe + IMX95_PAD_GPIO_IO06__LPSPI7_SOUT 0x3fe + IMX95_PAD_GPIO_IO07__LPSPI7_SCK 0x3fe + >; + }; + pinctrl_pcie0: pcie0grp { fsl,pins = < IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x4000031e @@ -716,6 +867,12 @@ IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x31e >; }; + pinctrl_tpm3: tpm3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO12__TPM3_CH2 0x51e + >; + }; + pinctrl_tpm6: tpm6grp { fsl,pins = < IMX95_PAD_GPIO_IO19__TPM6_CH2 0x51e @@ -729,6 +886,15 @@ IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e >; }; + pinctrl_uart5: uart5grp { + fsl,pins = < + IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + IMX95_PAD_DAP_TDI__LPUART5_RX 0x31e + IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e @@ -821,12 +987,12 @@ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe - IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe - IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe - IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe - IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe - IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts new file mode 100644 index 000000000000..26c2df9b1b60 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; + +#include +#include + +#include "imx95-phycore-fpsc.dtsi" + +/ { + compatible = "phytec,imx95-libra-rdk-fpsc", + "phytec,imx95-phycore-fpsc", "fsl,imx95"; + model = "PHYTEC Libra i.MX95 RDK FPSC"; + + aliases { + can1 = &flexcan2; + can2 = &flexcan1; + ethernet0 = &enetc_port0; + serial0 = &lpuart7; + serial1 = &lpuart8; + }; + + chosen { + stdout-path = &lpuart7; + }; + + backlight_lvds0: backlight0 { + compatible = "pwm-backlight"; + pinctrl-0 = <&pinctrl_lvds0>; + power-supply = <®_vdd_12v0>; + status = "disabled"; + }; + + transceiver1: can-phy { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + enable-gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>; + }; + + transceiver2: can-phy { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + enable-gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>; + }; + + panel0_lvds: panel-lvds0 { + backlight = <&backlight_lvds0>; + power-supply = <®_vdd_3v3>; + status = "disabled"; + }; + + reg_vdd_12v0: regulator-vdd-12v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + regulator-name = "VDD_12V0"; + }; + + reg_vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VDD_1V8"; + }; + + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3"; + }; + + reg_vdd_5v0: regulator-vdd-5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "VDD_5V0"; + }; +}; + +&enetc_port0 { + phy-handle = <ðphy0>; + status = "okay"; +}; + +&enetc_port2 { + managed = "in-band-status"; + phy-handle = <ðphy2>; + phy-mode = "10gbase-r"; +}; + +/* CAN FD */ +&flexcan1 { + phys = <&transceiver1>; + status = "okay"; +}; + +&flexcan2 { + phys = <&transceiver2>; + status = "okay"; +}; + +/* SPI-NOR */ +&flexspi1 { + pinctrl-0 = <&pinctrl_flexspi>; + pinctrl-names = "default"; + status = "okay"; + + spi_nor: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <166000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + vcc-supply = <®_vdd_1v8>; + }; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "RGMII2_nINT", "GPIO4", "RTC_INT", "", + "LVDS1_BL_EN"; +}; + +&lpi2c1 { + temperature-sensor@4f { + compatible = "nxp,p3t1755"; + reg = <0x4f>; + vs-supply = <®_vdd_1v8>; + }; +}; + +&lpi2c3 { + status = "okay"; + + leds@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-1 { + type = ; + }; + + led-2 { + type = ; + }; + + led-3 { + type = ; + }; + }; +}; + +&lpi2c4 { + status = "okay"; + + gpio_expander: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + interrupt-parent = <&gpio2>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3", + "CSI1_CTRL4", "CSI2_CTRL1", "CSI2_CTRL2", + "CSI2_CTRL3", "CSI2_CTRL4", "CLK_EN_AV", + "nCAN2_EN", "nCAN1_EN", "PCIE1_nWAKE", + "PCIE2_nWAKE", "PCIE2_nALERT_3V3", + "UART1_BT_RS_SEL", "UART1_RS232_485_SEL"; + vcc-supply = <®_vdd_1v8>; + + uart1_bt_rs_sel: bt-rs-hog { + gpios = <14 GPIO_ACTIVE_HIGH>; + gpio-hog; + line-name = "UART1_BT_RS_SEL"; + output-low; + }; + }; +}; + +&lpi2c5 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + vcc-supply = <®_vdd_1v8>; + }; +}; + +/* Used for M33 debug */ +&lpuart2 { + pinctrl-0 = <&pinctrl_lpuart2>; + pinctrl-names = "default"; +}; + +/* A-55 debug UART */ +&lpuart7 { + status = "okay"; +}; + +/* RS232/RS485/BT */ +&lpuart8 { + uart-has-rtscts; + status = "okay"; +}; + +&netc_emdio { /* RGMII2 */ + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + enet-phy-lane-no-swap; + ti,clk-output-sel = ; + ti,fifo-depth = ; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + }; + + ethphy2: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + max-speed = <10000>; /* 10Gbit/s */ + status = "disabled"; + }; +}; + +&pcie0 { + reset-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_vdd_3v3>; + status = "okay"; +}; + +&pcie1 { + reset-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_vdd_3v3>; + status = "okay"; +}; + +&rv3028 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + aux-voltage-chargeable = <1>; + wakeup-source; + trickle-resistor-ohms = <3000>; +}; + +&scmi_iomuxc { + pinctrl_lpuart2: lpuart2grp { /* FPSC proprietary */ + fsl,pins = < + IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX 0x31e + IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX 0x31e + >; + }; + + pinctrl_lvds0: lvds0grp { + fsl,pins = < + IMX95_PAD_GPIO_IO20__GPIO2_IO_BIT20 0x31e + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x31e + >; + }; + + pinctrl_tpm4: tpm4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO21__TPM4_CH1 0x51e + >; + }; +}; + +&tpm4 { + pinctrl-0 = <&pinctrl_tpm4>; + pinctrl-names = "default"; +}; + +&usb3 { + fsl,over-current-active-low; + fsl,power-active-low; + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb3_phy { + vbus-supply = <®_vdd_5v0>; + status = "okay"; +}; + +/* uSD Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi new file mode 100644 index 000000000000..7519d5bd06ba --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-phycore-fpsc.dtsi @@ -0,0 +1,656 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 PHYTEC Messtechnik GmbH + */ + +#include +#include "imx95.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX95 FPSC"; + compatible = "phytec,imx95-phycore-fpsc", "fsl,imx95"; + + aliases { + ethernet1 = &enetc_port1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c5; + i2c3 = &lpi2c3; + i2c4 = &lpi2c4; + i2c5 = &lpi2c1; + rtc0 = &rv3028; + rtc1 = &scmi_bbm; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x00000001 0x00000000>; + }; + + reg_nvcc_aon: regulator-nvcc-aon { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VDD_IO"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + off-on-delay-us = <12000>; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + pinctrl-names = "default"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDDSW_SD2"; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x7f000000>; + reusable; + size = <0 0x3c000000>; + linux,cma-default; + }; + }; +}; + +&enetc_port0 { /* FPSC RGMII2 */ + phy-mode = "rgmii-id"; + pinctrl-0 = <&pinctrl_enetc0>; + pinctrl-names = "default"; +}; + +&enetc_port1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&pinctrl_enetc1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&flexcan1 { /* FPSC CAN1 */ + pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default"; +}; + +&flexcan2 { /* FPSC CAN2 */ + pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default"; +}; + +&flexspi1 { /* FPSC QSPI */ + pinctrl-0 = <&pinctrl_flexspi>; + pinctrl-names = "default"; +}; + +&gpio1 { /* FPSC GPIO */ + gpio-line-names = "", "", "", "", "GPIO2", + "GPIO1", "", "", "", "", + "PCIE1_nPERST", "USB1_PWR_EN", "GPIO3", "USB2_PWR_EN", "PCIE2_nPERST"; + pinctrl-0 = <&pinctrl_gpio1>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gpio2 { /* FPSC GPIO */ + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "", "", + "", "RGMII2_nINT", "GPIO4"; + pinctrl-0 = <&pinctrl_gpio2>; + pinctrl-names = "default"; +}; + +&gpio3 { + gpio-line-names = "", "", "", "", "", + "", "", "SD2_RESET_B"; +}; + +&gpio4 { + gpio-line-names = "ENET2_nINT"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", "", + "", "", "", "", "", + "", "", "", "USB1_OC", "USB2_OC"; +}; + +&lpi2c1 { /* FPSC I2C5 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-names = "default"; + status = "okay"; + + dram_sense: temperature-sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + #thermal-sensor-cells = <1>; + }; + + emmc_sense: temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + #thermal-sensor-cells = <1>; + }; + + ethphy_sense: temperature-sensor@4a { + compatible = "ti,tmp102"; + reg = <0x4a>; + #thermal-sensor-cells = <1>; + }; + + pmic_sense: temperature-sensor@4b { + compatible = "ti,tmp102"; + reg = <0x4b>; + #thermal-sensor-cells = <1>; + }; + + /* User EEPROM */ + eeprom@50 { + compatible = "st,24c32", "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <®_nvcc_aon>; + }; + + /* Factory EEPROM */ + eeprom@51 { + compatible = "st,24c32", "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + vcc-supply = <®_nvcc_aon>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; + + /* User EEPROM ID page */ + eeprom@58 { + compatible = "st,24c32", "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + vcc-supply = <®_nvcc_aon>; + }; +}; + +&lpi2c2 { /* FPSC I2C1 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-names = "default"; +}; + +&lpi2c3 { /* FPSC I2C3 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-names = "default"; +}; + +&lpi2c4 { /* FPSC I2C4 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c4>; + pinctrl-names = "default"; +}; + +&lpi2c5 { /* FPSC I2C2 */ + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-names = "default"; +}; + +&lpspi3 { /* FPSC SPI2 */ + pinctrl-0 = <&pinctrl_lpspi3>; + pinctrl-names = "default"; +}; + +&lpspi4 { /* FPSC SPI3 */ + pinctrl-0 = <&pinctrl_lpspi4>; + pinctrl-names = "default"; +}; + +&lpspi7 { /* FPSC SPI1 */ + pinctrl-0 = <&pinctrl_lpspi7>; + pinctrl-names = "default"; +}; + +&lpuart5 { /* FPSC UART2 */ + pinctrl-0 = <&pinctrl_lpuart5>; + pinctrl-names = "default"; +}; + +&lpuart7 { /* FPSC UART3 */ + pinctrl-0 = <&pinctrl_lpuart7>; + pinctrl-names = "default"; +}; + +&lpuart8 { /* FPSC UART1 */ + pinctrl-0 = <&pinctrl_lpuart8>; + pinctrl-names = "default"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_emdio { /* FPSC RGMII2 */ + pinctrl-0 = <&pinctrl_emdio>; + pinctrl-names = "default"; + status = "okay"; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio4>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + enet-phy-lane-no-swap; + ti,clk-output-sel = ; + ti,fifo-depth = ; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + }; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&pcie0 { /* FPSC PCIE1 */ + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; +}; + +&pcie1 { /* FPSC PCIE2 */ + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; +}; + +&sai5 { /* FPSC SAI1 */ + pinctrl-0 = <&pinctrl_sai5>; + pintrc-names = "default"; +}; + +&scmi_iomuxc { + pinctrl_emdio: emdiogrp { + fsl,pins = < + IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e /* RGMII2_MDIO */ + IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x502 /* RGMII2_MDC */ + >; + }; + + pinctrl_enetc0: enetc0grp { + fsl,pins = < + IMX95_PAD_GPIO_IO16__GPIO2_IO_BIT16 0x31e /* RGMII2_nINT */ + IMX95_PAD_CCM_CLKO3__NETCMIX_TOP_NETC_TMR_1588_TRIG2 0x31e /* RGMII2_EVENT_IN */ + IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2 0x31e /* RGMII2_EVENT_OUT */ + + IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e /* RGMII2_TX_3 */ + IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e /* RGMII2_TX_2 */ + IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e /* RGMII2_TX_1 */ + IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e /* RGMII2_TX_0 */ + IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e /* RGMII2_TX_CTL */ + IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e /* RGMII2_TXC */ + IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e /* RGMII2_RX_3 */ + IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e /* RGMII2_RX_2 */ + IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e /* RGMII2_RX_1 */ + IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e /* RGMII2_RX_0 */ + IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e /* RGMII2_RX_CTL */ + IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e /* RGMII2_RXC */ + >; + }; + + pinctrl_enetc1: enetc1grp { + fsl,pins = < + IMX95_PAD_ENET1_MDC__GPIO4_IO_BIT0 0x31e + IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x57e + IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x57e + IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x57e + IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x57e + IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e + IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x58e + IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e + IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e + IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e + IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x57e + IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e + IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x58e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x51e /* CAN1_TX */ + IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x51e /* CAN1_RX */ + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + IMX95_PAD_GPIO_IO25__CAN2_TX 0x51e /* CAN2_TX */ + IMX95_PAD_GPIO_IO27__CAN2_RX 0x51e /* CAN2_RX */ + >; + }; + + pinctrl_flexspi: flexspigrp { + fsl,pins = < + IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe /* QSPI_CE */ + IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe /* QSPI_CLK */ + IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe /* QSPI_DATA_0 */ + IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe /* QSPI_DATA_1 */ + IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe /* QSPI_DATA_2 */ + IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe /* QSPI_DATA_3 */ + IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe /* QSPI_DQS */ + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + IMX95_PAD_UART1_TXD__AONMIX_TOP_GPIO1_IO_BIT5 0x31e /* GPIO1 */ + IMX95_PAD_UART1_RXD__AONMIX_TOP_GPIO1_IO_BIT4 0x31e /* GPIO2 */ + IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12 0x31e /* GPIO3 */ + >; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = < + IMX95_PAD_GPIO_IO17__GPIO2_IO_BIT17 0x31e /* GPIO4 */ + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL 0x40000b9e /* I2C5_SCL */ + IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA 0x40000b9e /* I2C5_SDA */ + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40000b9e /* I2C1_SDA_DNU */ + IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40000b9e /* I2C1_SCL_DNU */ + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e /* I2C3_SDA */ + IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e /* I2C3_SCL */ + >; + }; + + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e /* I2C4_SDA */ + IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e /* I2C4_SDL */ + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + IMX95_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e /* I2C2_SDA */ + IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e /* I2C2_SCL */ + >; + }; + + pinctrl_lpspi3: lpspi3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO11__LPSPI3_SCK 0x51e /* SPI2_SCLK */ + IMX95_PAD_GPIO_IO10__LPSPI3_SOUT 0x51e /* SPI2_MOSI */ + IMX95_PAD_GPIO_IO09__LPSPI3_SIN 0x51e /* SPI2_MISO */ + IMX95_PAD_GPIO_IO08__LPSPI3_PCS0 0x51e /* SPI2_CS */ + >; + }; + + pinctrl_lpspi4: lpspi4grp { + fsl,pins = < + IMX95_PAD_GPIO_IO21__LPSPI4_SCK 0x51e /* SPI3_SCLK */ + IMX95_PAD_GPIO_IO20__LPSPI4_SOUT 0x51e /* SPI3_MOSI */ + IMX95_PAD_GPIO_IO19__LPSPI4_SIN 0x51e /* SPI3_MISO */ + IMX95_PAD_GPIO_IO18__LPSPI4_PCS0 0x51e /* SPI3_CS */ + >; + }; + + pinctrl_lpspi7: lpspi7grp { + fsl,pins = < + IMX95_PAD_GPIO_IO07__LPSPI7_SCK 0x51e /* SPI1_SCLK */ + IMX95_PAD_GPIO_IO06__LPSPI7_SOUT 0x51e /* SPI1_MOSI */ + IMX95_PAD_GPIO_IO05__LPSPI7_SIN 0x51e /* SPI1_MISO */ + IMX95_PAD_GPIO_IO04__LPSPI7_PCS0 0x51e /* SPI1_CS */ + >; + }; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = < + IMX95_PAD_GPIO_IO01__LPUART5_RX 0x51e /* UART2_RXD */ + IMX95_PAD_GPIO_IO00__LPUART5_TX 0x51e /* UART2_TXD */ + IMX95_PAD_GPIO_IO03__LPUART5_RTS_B 0x51e /* UART2_RTS */ + IMX95_PAD_GPIO_IO02__LPUART5_CTS_B 0x51e /* UART2_CTS */ + >; + }; + + pinctrl_lpuart7: lpuart7grp { + fsl,pins = < + IMX95_PAD_GPIO_IO37__LPUART7_RX 0x31e /* UART3_RXD */ + IMX95_PAD_GPIO_IO36__LPUART7_TX 0x31e /* UART3_TXD */ + >; + }; + + pinctrl_lpuart8: lpuart8grp { + fsl,pins = < + IMX95_PAD_GPIO_IO13__LPUART8_RX 0x51e /* UART1_RXD */ + IMX95_PAD_GPIO_IO12__LPUART8_TX 0x51e /* UART1_TXD */ + IMX95_PAD_GPIO_IO15__LPUART8_RTS_B 0x51e /* UART1_RTS */ + IMX95_PAD_GPIO_IO14__LPUART8_CTS_B 0x51e /* UART1_CTS */ + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x31e /* PCIE1_nCLKREQ */ + IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10 0x31e /* PCIE1_nPERST */ + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x31e /* PCIE2_nCLKREQ */ + IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14 0x31e /* PCIE2_nPERST */ + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e + >; + }; + + pinctrl_sai5: sai5grp { + fsl,pins = < + IMX95_PAD_XSPI1_DQS__SAI5_RX_SYNC 0x51e /* SAI1_RX_SYNC */ + IMX95_PAD_XSPI1_SS1_B__SAI5_RX_BCLK 0x51e /* SAI1_RX_BCLK */ + IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x51e /* SAI1_RX_DATA */ + IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC 0x51e /* SAI1_TX_SYNC */ + IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK 0x51e /* SAI1_TX_BCLK */ + IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x51e /* SAI1_TX_DATA */ + >; + }; + + pinctrl_tpm3: tpm3grp { + fsl,pins = < + IMX95_PAD_GPIO_IO24__TPM3_CH3 0x51e /* PWM1 */ + >; + }; + + pinctrl_tpm5: tpm5grp { + fsl,pins = < + IMX95_PAD_GPIO_IO26__TPM5_CH3 0x51e /* PWM2 */ + >; + }; + + pinctrl_usbc: usbcgrp { + fsl,pins = < + IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11 0x51e /* USB1_PWR_EN */ + IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x51e /* USB1_OC */ + >; + }; + + pinctrl_usb2: usb2grp { + fsl,pins = < + IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13 0x51e /* USB2_PWR_EN */ + IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x51e /* USB2_OC */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe + IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe + IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */ + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e /* CLK */ + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e /* CMD */ + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e /* DATA0 */ + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e /* DATA1 */ + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e /* DATA2 */ + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e /* DATA3 */ + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */ + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e /* CLK */ + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e /* CMD */ + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e /* DATA0 */ + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e /* DATA1 */ + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e /* DATA2 */ + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e /* DATA3 */ + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + IMX95_PAD_SD2_CD_B__USDHC2_CD_B 0x31e /* CD */ + IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe /* CLK */ + IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe /* CMD */ + IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe /* DATA0 */ + IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe /* DATA1 */ + IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe /* DATA2 */ + IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe /* DATA3 */ + IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e /* SDIO_CLK */ + IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e /* SDIO_CMD */ + IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e /* SDIO_DATA0 */ + IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e /* SDIO_DATA1 */ + IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e /* SDIO_DATA2 */ + IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e /* SDIO_DATA3 */ + >; + }; +}; + +&tpm3 { /* FPSC PWM1 */ + pinctrl-0 = <&pinctrl_tpm3>; + pinctrl-names = "default"; +}; + +&tpm5 { /* FPSC PWM2 */ + pinctrl-0 = <&pinctrl_tpm5>; + pinctrl-names = "default"; +}; + +&usb3 { /* FPSC USB1 */ + pinctrl-0 = <&pinctrl_usbc>; + pinctrl-names = "default"; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + status = "okay"; +}; + +&usdhc2 { /* FPSC SDCARD */ + bus-width = <4>; + disable-wp; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + sd-uhs-sdr104; + vmmc-supply = <®_usdhc2_vmmc>; +}; + +&usdhc3 { /* FPSC SDIO */ + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index 5aecdd9b62ff..4ca6a7ea586e 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -3,6 +3,7 @@ * Copyright 2024 NXP */ +#include #include #include #include @@ -688,15 +689,14 @@ tpm6: pwm@42510000 { }; i3c2: i3c@42520000 { - compatible = "silvaco,i3c-master-v1"; + compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1"; reg = <0x42520000 0x10000>; interrupts = ; #address-cells = <3>; #size-cells = <0>; clocks = <&scmi_clk IMX95_CLK_BUSAON>, - <&scmi_clk IMX95_CLK_I3C2>, <&scmi_clk IMX95_CLK_I3C2SLOW>; - clock-names = "pclk", "fast_clk", "slow_clk"; + clock-names = "pclk", "fast_clk"; status = "disabled"; }; @@ -1152,6 +1152,7 @@ gpio2: gpio@43810000 { <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 4 32>; + ngpios = <32>; }; gpio3: gpio@43820000 { @@ -1168,6 +1169,7 @@ gpio3: gpio@43820000 { clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 104 8>, <&scmi_iomuxc 8 74 18>, <&scmi_iomuxc 26 42 2>, <&scmi_iomuxc 28 0 4>; + ngpios = <32>; }; gpio4: gpio@43840000 { @@ -1183,6 +1185,7 @@ gpio4: gpio@43840000 { <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 46 28>, <&scmi_iomuxc 28 44 2>; + ngpios = <30>; }; gpio5: gpio@43850000 { @@ -1198,6 +1201,7 @@ gpio5: gpio@43850000 { <&scmi_clk IMX95_CLK_BUSWAKEUP>; clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 92 12>, <&scmi_iomuxc 12 36 6>; + ngpios = <18>; }; aips1: bus@44000000 { @@ -1273,15 +1277,14 @@ tpm2: pwm@44320000 { }; i3c1: i3c@44330000 { - compatible = "silvaco,i3c-master-v1"; + compatible = "nxp,imx95-i3c", "silvaco,i3c-master-v1"; reg = <0x44330000 0x10000>; interrupts = ; #address-cells = <3>; #size-cells = <0>; clocks = <&scmi_clk IMX95_CLK_BUSAON>, - <&scmi_clk IMX95_CLK_I3C1>, <&scmi_clk IMX95_CLK_I3C1SLOW>; - clock-names = "pclk", "fast_clk", "slow_clk"; + clock-names = "pclk", "fast_clk"; status = "disabled"; }; @@ -1508,6 +1511,7 @@ gpio1: gpio@47400000 { <&scmi_clk IMX95_CLK_M33>; clock-names = "gpio", "port"; gpio-ranges = <&scmi_iomuxc 0 112 16>; + ngpios = <16>; status = "disabled"; }; @@ -1801,6 +1805,49 @@ pcie1_ep: pcie-ep@4c380000 { status = "disabled"; }; + vpu_blk_ctrl: clock-controller@4c410000 { + compatible = "nxp,imx95-vpu-csr", "syscon"; + reg = <0x0 0x4c410000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&scmi_clk IMX95_CLK_VPUAPB>; + power-domains = <&scmi_devpd IMX95_PD_VPU>; + assigned-clocks = <&scmi_clk IMX95_CLK_VPUAPB>, + <&scmi_clk IMX95_CLK_VPU>, + <&scmi_clk IMX95_CLK_VPUJPEG>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>, + <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>; + assigned-clock-rates = <133333333>, <667000000>, <500000000>; + }; + + jpegdec: jpegdec@4c500000 { + compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec"; + reg = <0x0 0x4C500000 0x0 0x00050000>; + interrupts = , + , + , + ; + clocks = <&scmi_clk IMX95_CLK_VPU>, + <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>; + assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>; + power-domains = <&scmi_devpd IMX95_PD_VPU>; + }; + + jpegenc: jpegenc@4c550000 { + compatible = "nxp,imx95-jpgenc", "nxp,imx8qxp-jpgenc"; + reg = <0x0 0x4C550000 0x0 0x00050000>; + interrupts = , + , + , + ; + clocks = <&scmi_clk IMX95_CLK_VPU>, + <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>; + assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>; + assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>; + power-domains = <&scmi_devpd IMX95_PD_VPU>; + }; + netcmix_blk_ctrl: syscon@4c810000 { compatible = "nxp,imx95-netcmix-blk-ctrl", "syscon"; reg = <0x0 0x4c810000 0x0 0x8>; @@ -1861,6 +1908,14 @@ netc_bus0: pcie@4ca00000 { <0x90 &its 0x65 0x1>, //ENETC2 VF0 <0xa0 &its 0x66 0x1>, //ENETC2 VF1 <0xc0 &its 0x67 0x1>; //NETC Timer + iommu-map = <0x0 &smmu 0x20 0x1>, + <0x10 &smmu 0x21 0x1>, + <0x20 &smmu 0x22 0x1>, + <0x40 &smmu 0x23 0x1>, + <0x80 &smmu 0x24 0x1>, + <0x90 &smmu 0x25 0x1>, + <0xa0 &smmu 0x26 0x1>, + <0xc0 &smmu 0x27 0x1>; /* ENETC0~2 and Timer BAR0 - non-prefetchable memory */ ranges = <0x82000000 0x0 0x4cc00000 0x0 0x4cc00000 0x0 0xe0000 /* Timer BAR2 - prefetchable memory */ diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 7ee1228a50f4..79daba930ad6 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -136,7 +136,7 @@ reg_vcc_3v3: regulator-3v3 { regulator-max-microvolt = <3300000>; }; - sound { + sound: sound { compatible = "fsl,imx-audio-tlv320aic32x4"; model = "tqm-tlv320aic32"; ssi-controller = <&sai3>; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index 4be6534ed01d..09d2fbbe1d8c 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -114,6 +114,14 @@ soc@0 { #size-cells = <1>; ranges = <0 0 0 0x80000000>; + rtc0: rtc@40060000 { + compatible = "nxp,s32g2-rtc"; + reg = <0x40060000 0x1000>; + interrupts = ; + clocks = <&clks 54>, <&clks 55>; + clock-names = "ipg", "source0"; + }; + pinctrl: pinctrl@4009c240 { compatible = "nxp,s32g2-siul2-pinctrl"; /* MSCR0-MSCR101 registers on siul2_0 */ @@ -399,6 +407,45 @@ usbotg: usb@44064000 { status = "disabled"; }; + spi0: spi@401d4000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x401d4000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <8>; + bus-num = <0>; + dmas = <&edma0 0 7>, <&edma0 0 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@401d8000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x401d8000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <1>; + dmas = <&edma0 0 10>, <&edma0 0 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@401dc000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x401dc000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <2>; + dmas = <&edma0 0 13>, <&edma0 0 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + i2c0: i2c@401e4000 { compatible = "nxp,s32g2-i2c"; reg = <0x401e4000 0x1000>; @@ -483,6 +530,45 @@ uart2: serial@402bc000 { status = "disabled"; }; + spi3: spi@402c8000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x402c8000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <3>; + dmas = <&edma0 1 7>, <&edma0 1 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@402cc000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x402cc000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <4>; + dmas = <&edma0 1 10>, <&edma0 1 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@402d0000 { + compatible = "nxp,s32g2-dspi"; + reg = <0x402d0000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <5>; + dmas = <&edma0 1 13>, <&edma0 1 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + i2c3: i2c@402d8000 { compatible = "nxp,s32g2-i2c"; reg = <0x402d8000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi index 191d2dab4254..39effbe8217c 100644 --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi @@ -171,6 +171,15 @@ soc@0 { #size-cells = <1>; ranges = <0 0 0 0x80000000>; + rtc0: rtc@40060000 { + compatible = "nxp,s32g3-rtc", + "nxp,s32g2-rtc"; + reg = <0x40060000 0x1000>; + interrupts = ; + clocks = <&clks 54>, <&clks 55>; + clock-names = "ipg", "source0"; + }; + pinctrl: pinctrl@4009c240 { compatible = "nxp,s32g2-siul2-pinctrl"; /* MSCR0-MSCR101 registers on siul2_0 */ @@ -458,6 +467,45 @@ usbotg: usb@44064000 { status = "disabled"; }; + spi0: spi@401d4000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x401d4000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <8>; + bus-num = <0>; + dmas = <&edma0 0 7>, <&edma0 0 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@401d8000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x401d8000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <1>; + dmas = <&edma0 0 10>, <&edma0 0 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@401dc000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x401dc000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <2>; + dmas = <&edma0 0 13>, <&edma0 0 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + i2c0: i2c@401e4000 { compatible = "nxp,s32g3-i2c", "nxp,s32g2-i2c"; @@ -547,6 +595,45 @@ uart2: serial@402bc000 { status = "disabled"; }; + spi3: spi@402c8000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x402c8000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <3>; + dmas = <&edma0 1 7>, <&edma0 1 8>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@402cc000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x402cc000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <4>; + dmas = <&edma0 1 10>, <&edma0 1 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@402d0000 { + compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi"; + reg = <0x402d0000 0x1000>; + interrupts = ; + clocks = <&clks 26>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <5>; + dmas = <&edma0 1 13>, <&edma0 1 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + i2c3: i2c@402d8000 { compatible = "nxp,s32g3-i2c", "nxp,s32g2-i2c"; diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi index d26af0fb8be7..f1969cdcef19 100644 --- a/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi +++ b/arch/arm64/boot/dts/freescale/s32gxxxa-evb.dtsi @@ -173,6 +173,78 @@ i2c4-gpio-grp1 { pinmux = <0x2d40>, <0x2d30>; }; }; + + dspi1_pins: dspi1-pins { + dspi1-grp0 { + pinmux = <0x72>; + output-enable; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi1-grp1 { + pinmux = <0x62>; + output-enable; + slew-rate = <150>; + }; + + dspi1-grp2 { + pinmux = <0x83>; + output-enable; + input-enable; + slew-rate = <150>; + }; + + dspi1-grp3 { + pinmux = <0x5F0>; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi1-grp4 { + pinmux = <0x3D92>, + <0x3DA2>, + <0x3DB2>; + }; + }; + + dspi5_pins: dspi5-pins { + dspi5-grp0 { + pinmux = <0x93>; + output-enable; + input-enable; + slew-rate = <150>; + }; + + dspi5-grp1 { + pinmux = <0xA0>; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi5-grp2 { + pinmux = <0x3ED2>, + <0x3EE2>, + <0x3EF2>; + }; + + dspi5-grp3 { + pinmux = <0xB3>; + output-enable; + slew-rate = <150>; + }; + + dspi5-grp4 { + pinmux = <0xC3>; + output-enable; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + }; }; &can0 { @@ -220,3 +292,15 @@ &i2c4 { pinctrl-1 = <&i2c4_gpio_pins>; status = "okay"; }; + +&spi1 { + pinctrl-0 = <&dspi1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spi5 { + pinctrl-0 = <&dspi5_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi index 4587e1cb8835..3bc3335c9248 100644 --- a/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/s32gxxxa-rdb.dtsi @@ -127,6 +127,78 @@ i2c4-gpio-grp1 { pinmux = <0x2d40>, <0x2d30>; }; }; + + dspi1_pins: dspi1-pins { + dspi1-grp0 { + pinmux = <0x72>; + output-enable; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi1-grp1 { + pinmux = <0x62>; + output-enable; + slew-rate = <150>; + }; + + dspi1-grp2 { + pinmux = <0x83>; + output-enable; + input-enable; + slew-rate = <150>; + }; + + dspi1-grp3 { + pinmux = <0x5F0>; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi1-grp4 { + pinmux = <0x3D92>, + <0x3DA2>, + <0x3DB2>; + }; + }; + + dspi5_pins: dspi5-pins { + dspi5-grp0 { + pinmux = <0x93>; + output-enable; + input-enable; + slew-rate = <150>; + }; + + dspi5-grp1 { + pinmux = <0xA0>; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + + dspi5-grp2 { + pinmux = <0x3ED2>, + <0x3EE2>, + <0x3EF2>; + }; + + dspi5-grp3 { + pinmux = <0xB3>; + output-enable; + slew-rate = <150>; + }; + + dspi5-grp4 { + pinmux = <0xC3>; + output-enable; + input-enable; + slew-rate = <150>; + bias-pull-up; + }; + }; }; &can0 { @@ -160,6 +232,18 @@ pca85073a: rtc@51 { }; }; +&spi1 { + pinctrl-0 = <&dspi1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spi5 { + pinctrl-0 = <&dspi5_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c2_pins>; diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi index 2471bb109e8e..9d44f488c083 100644 --- a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi +++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi @@ -10,23 +10,7 @@ #include / { - sfp1: sfp1 { - compatible = "sff,sfp"; - i2c-bus = <&sfp1_i2c>; - mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>; - los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>; - }; - sfp2: sfp2 { - compatible = "sff,sfp"; - i2c-bus = <&sfp2_i2c>; - mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>; - los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>; - }; }; &dpmac1 { diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi index 65b4ed28a3d4..444bbf511596 100644 --- a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi @@ -47,6 +47,26 @@ reg_3v3: regulator-3v3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&sfp1_i2c>; + mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + sfp2: sfp2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; }; &duart0 { @@ -69,6 +89,7 @@ i2c-mux@70 { reg = <0x70>; #address-cells = <1>; #size-cells = <0>; + vdd-supply = <®_3v3>; i2c@0 { reg = <0x0>; diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi index 138f8778afde..7da1bfd83cca 100644 --- a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi @@ -8,6 +8,14 @@ */ / { + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + reg_vcc3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index a77a504effea..c1e66db0f4c5 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -126,6 +126,7 @@ cb_intosc_ls_clk: cb-intosc-ls-clk { f2s_free_clk: f2s-free-clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-frequency = <100000000>; }; osc1: osc1 { diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index bb0bcc6875dc..e83fdc92621e 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -5,103 +5,12 @@ * Copyright (C) 2016, LG Electronics */ -#include #include +#include "lg131x.dtsi" + / { - #address-cells = <2>; - #size-cells = <2>; - compatible = "lge,lg1312"; - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - }; - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - L2_0: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; - }; - - gic: interrupt-controller@c0001000 { - #interrupt-cells = <3>; - compatible = "arm,gic-400"; - interrupt-controller; - reg = <0x0 0xc0001000 0x1000>, - <0x0 0xc0002000 0x2000>, - <0x0 0xc0004000 0x2000>, - <0x0 0xc0006000 0x2000>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, - <&cpu1>, - <&cpu2>, - <&cpu3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - clk_bus: clk_bus { - #clock-cells = <0>; - - compatible = "fixed-clock"; - clock-frequency = <198000000>; - clock-output-names = "BUSCLK"; - }; soc { #address-cells = <2>; @@ -122,233 +31,4 @@ eth0: ethernet@c1b00000 { mac-address = [ 00 00 00 00 00 00 ]; }; }; - - amba { - #address-cells = <2>; - #size-cells = <1>; - - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - timers: timer@fd100000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x0 0xfd100000 0x1000>; - interrupts = ; - clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; - clock-names = "timer0clk", "timer1clk", "apb_pclk"; - }; - wdog: watchdog@fd200000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0 0xfd200000 0x1000>; - interrupts = ; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "wdog_clk", "apb_pclk"; - }; - uart0: serial@fe000000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe000000 0x1000>; - interrupts = ; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - uart1: serial@fe100000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe100000 0x1000>; - interrupts = ; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - uart2: serial@fe200000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe200000 0x1000>; - interrupts = ; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - spi0: spi@fe800000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xfe800000 0x1000>; - interrupts = ; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "sspclk", "apb_pclk"; - }; - spi1: spi@fe900000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xfe900000 0x1000>; - interrupts = ; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "sspclk", "apb_pclk"; - }; - dmac0: dma-controller@c1128000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xc1128000 0x1000>; - interrupts = ; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - gpio0: gpio@fd400000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd400000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio1: gpio@fd410000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd410000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio2: gpio@fd420000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd420000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio3: gpio@fd430000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd430000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - gpio4: gpio@fd440000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd440000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio5: gpio@fd450000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd450000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio6: gpio@fd460000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd460000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio7: gpio@fd470000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd470000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio8: gpio@fd480000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd480000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio9: gpio@fd490000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd490000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio10: gpio@fd4a0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4a0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio11: gpio@fd4b0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4b0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - gpio12: gpio@fd4c0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4c0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio13: gpio@fd4d0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4d0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio14: gpio@fd4e0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4e0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio15: gpio@fd4f0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4f0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio16: gpio@fd500000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd500000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio17: gpio@fd510000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd510000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - }; }; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index c07d670bc465..92fa5694cad1 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -5,103 +5,12 @@ * Copyright (C) 2016, LG Electronics */ -#include #include +#include "lg131x.dtsi" + / { - #address-cells = <2>; - #size-cells = <2>; - compatible = "lge,lg1313"; - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - }; - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&L2_0>; - }; - L2_0: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; - }; - - gic: interrupt-controller@c0001000 { - #interrupt-cells = <3>; - compatible = "arm,gic-400"; - interrupt-controller; - reg = <0x0 0xc0001000 0x1000>, - <0x0 0xc0002000 0x2000>, - <0x0 0xc0004000 0x2000>, - <0x0 0xc0006000 0x2000>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, - <&cpu1>, - <&cpu2>, - <&cpu3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - clk_bus: clk_bus { - #clock-cells = <0>; - - compatible = "fixed-clock"; - clock-frequency = <198000000>; - clock-output-names = "BUSCLK"; - }; soc { #address-cells = <2>; @@ -122,233 +31,4 @@ eth0: ethernet@c3700000 { mac-address = [ 00 00 00 00 00 00 ]; }; }; - - amba { - #address-cells = <2>; - #size-cells = <1>; - - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - timers: timer@fd100000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x0 0xfd100000 0x1000>; - interrupts = ; - clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; - clock-names = "timer0clk", "timer1clk", "apb_pclk"; - }; - wdog: watchdog@fd200000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0 0xfd200000 0x1000>; - interrupts = ; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "wdog_clk", "apb_pclk"; - }; - uart0: serial@fe000000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe000000 0x1000>; - interrupts = ; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - uart1: serial@fe100000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe100000 0x1000>; - interrupts = ; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - uart2: serial@fe200000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0xfe200000 0x1000>; - interrupts = ; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - spi0: spi@fe800000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xfe800000 0x1000>; - interrupts = ; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "sspclk", "apb_pclk"; - }; - spi1: spi@fe900000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x0 0xfe900000 0x1000>; - interrupts = ; - clocks = <&clk_bus>, <&clk_bus>; - clock-names = "sspclk", "apb_pclk"; - }; - dmac0: dma-controller@c1128000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xc1128000 0x1000>; - interrupts = ; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - gpio0: gpio@fd400000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd400000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio1: gpio@fd410000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd410000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio2: gpio@fd420000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd420000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio3: gpio@fd430000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd430000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - gpio4: gpio@fd440000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd440000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio5: gpio@fd450000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd450000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio6: gpio@fd460000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd460000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio7: gpio@fd470000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd470000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio8: gpio@fd480000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd480000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio9: gpio@fd490000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd490000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio10: gpio@fd4a0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4a0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio11: gpio@fd4b0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4b0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - gpio12: gpio@fd4c0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4c0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio13: gpio@fd4d0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4d0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio14: gpio@fd4e0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4e0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio15: gpio@fd4f0000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd4f0000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio16: gpio@fd500000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd500000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - gpio17: gpio@fd510000 { - #gpio-cells = <2>; - compatible = "arm,pl061", "arm,primecell"; - gpio-controller; - reg = <0x0 0xfd510000 0x1000>; - clocks = <&clk_bus>; - clock-names = "apb_pclk"; - }; - }; }; diff --git a/arch/arm64/boot/dts/lg/lg131x.dtsi b/arch/arm64/boot/dts/lg/lg131x.dtsi new file mode 100644 index 000000000000..4cb1e4510897 --- /dev/null +++ b/arch/arm64/boot/dts/lg/lg131x.dtsi @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for lg131x SoCs + * + * Copyright (C) 2016, LG Electronics + */ + +#include +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + gic: interrupt-controller@c0001000 { + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + interrupt-controller; + reg = <0x0 0xc0001000 0x1000>, + <0x0 0xc0002000 0x2000>, + <0x0 0xc0004000 0x2000>, + <0x0 0xc0006000 0x2000>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + clk_bus: clk_bus { + #clock-cells = <0>; + + compatible = "fixed-clock"; + clock-frequency = <198000000>; + clock-output-names = "BUSCLK"; + }; + + amba { + #address-cells = <2>; + #size-cells = <1>; + + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + timers: timer@fd100000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xfd100000 0x1000>; + interrupts = ; + clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; + }; + wdog: watchdog@fd200000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xfd200000 0x1000>; + interrupts = ; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "wdog_clk", "apb_pclk"; + }; + uart0: serial@fe000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe000000 0x1000>; + interrupts = ; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + uart1: serial@fe100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe100000 0x1000>; + interrupts = ; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + uart2: serial@fe200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfe200000 0x1000>; + interrupts = ; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + spi0: spi@fe800000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xfe800000 0x1000>; + interrupts = ; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "sspclk", "apb_pclk"; + }; + spi1: spi@fe900000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xfe900000 0x1000>; + interrupts = ; + clocks = <&clk_bus>, <&clk_bus>; + clock-names = "sspclk", "apb_pclk"; + }; + dmac0: dma-controller@c1128000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xc1128000 0x1000>; + interrupts = ; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + gpio0: gpio@fd400000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd400000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio1: gpio@fd410000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd410000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio2: gpio@fd420000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd420000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio3: gpio@fd430000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd430000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio4: gpio@fd440000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd440000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio5: gpio@fd450000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd450000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio6: gpio@fd460000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd460000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio7: gpio@fd470000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd470000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio8: gpio@fd480000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd480000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio9: gpio@fd490000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd490000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio10: gpio@fd4a0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4a0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio11: gpio@fd4b0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4b0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + gpio12: gpio@fd4c0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4c0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio13: gpio@fd4d0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4d0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio14: gpio@fd4e0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4e0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio15: gpio@fd4f0000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd4f0000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio16: gpio@fd500000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd500000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + gpio17: gpio@fd510000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x0 0xfd510000 0x1000>; + clocks = <&clk_bus>; + clock-names = "apb_pclk"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index f68865d06edd..a4df4c21399e 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -68,6 +68,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-magneton-sku393218.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-ponyta-sku1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-rusty-sku196608.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-squirtle.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-starmie-sku1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb @@ -76,8 +77,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb -dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb-sku589824.dtb -dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb-sku589825.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-voltorb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-geralt-ciri-sku0.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi index 81ba045e0e0e..5fd222df440d 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi @@ -3,6 +3,7 @@ /dts-v1/; #include +#include #include #include "mt7988a.dtsi" @@ -21,6 +22,25 @@ fan: pwm-fan { status = "okay"; }; + gpio-leds { + compatible = "gpio-leds"; + + led_green: led-green { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 79 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_blue: led-blue { + function = LED_FUNCTION_WPS; + color = ; + gpios = <&pio 63 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -40,6 +60,10 @@ reg_3p3v: regulator-3p3v { }; }; +&cci { + proc-supply = <&rt5190_buck3>; +}; + &cpu0 { proc-supply = <&rt5190_buck3>; }; @@ -219,18 +243,6 @@ &pcie3 { }; &pio { - mdio0_pins: mdio0-pins { - mux { - function = "eth"; - groups = "mdc_mdio0"; - }; - - conf { - pins = "SMI_0_MDC", "SMI_0_MDIO"; - drive-strength = <8>; - }; - }; - i2c0_pins: i2c0-g0-pins { mux { function = "i2c"; @@ -245,20 +257,6 @@ mux { }; }; - i2c1_sfp_pins: i2c1-sfp-g0-pins { - mux { - function = "i2c"; - groups = "i2c1_sfp"; - }; - }; - - i2c2_0_pins: i2c2-g0-pins { - mux { - function = "i2c"; - groups = "i2c2_0"; - }; - }; - i2c2_1_pins: i2c2-g1-pins { mux { function = "i2c"; @@ -294,34 +292,6 @@ mux { }; }; - gbe0_led1_pins: gbe0-led1-pins { - mux { - function = "led"; - groups = "gbe0_led1"; - }; - }; - - gbe1_led1_pins: gbe1-led1-pins { - mux { - function = "led"; - groups = "gbe1_led1"; - }; - }; - - gbe2_led1_pins: gbe2-led1-pins { - mux { - function = "led"; - groups = "gbe2_led1"; - }; - }; - - gbe3_led1_pins: gbe3-led1-pins { - mux { - function = "led"; - groups = "gbe3_led1"; - }; - }; - i2p5gbe_led0_pins: 2p5gbe-led0-pins { mux { function = "led"; @@ -329,13 +299,6 @@ mux { }; }; - i2p5gbe_led1_pins: 2p5gbe-led1-pins { - mux { - function = "led"; - groups = "2p5gbe_led1"; - }; - }; - mmc0_pins_emmc_45: mmc0-emmc-45-pins { mux { function = "flash"; @@ -357,40 +320,12 @@ mux { }; }; - snfi_pins: snfi-pins { - mux { - function = "flash"; - groups = "snfi"; - }; - }; - - spi0_pins: spi0-pins { - mux { - function = "spi"; - groups = "spi0"; - }; - }; - spi0_flash_pins: spi0-flash-pins { mux { function = "spi"; groups = "spi0", "spi0_wp_hold"; }; }; - - spi2_pins: spi2-pins { - mux { - function = "spi"; - groups = "spi2"; - }; - }; - - spi2_flash_pins: spi2-flash-pins { - mux { - function = "spi"; - groups = "spi2", "spi2_wp_hold"; - }; - }; }; &pwm { diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi index c46b31f8d653..560ec86dbec0 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi @@ -12,6 +12,35 @@ / { #address-cells = <2>; #size-cells = <2>; + cci: cci { + compatible = "mediatek,mt7988-cci", "mediatek,mt8183-cci"; + clocks = <&mcusys CLK_MCU_BUS_DIV_SEL>, + <&topckgen CLK_TOP_XTAL>; + clock-names = "cci", "intermediate"; + operating-points-v2 = <&cci_opp>; + }; + + cci_opp: opp-table-cci { + compatible = "operating-points-v2"; + opp-shared; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <850000>; + }; + opp-660000000 { + opp-hz = /bits/ 64 <660000000>; + opp-microvolt = <850000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <850000>; + }; + opp-1080000000 { + opp-hz = /bits/ 64 <1080000000>; + opp-microvolt = <900000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -25,6 +54,7 @@ cpu0: cpu@0 { <&topckgen CLK_TOP_XTAL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; + mediatek,cci = <&cci>; }; cpu1: cpu@1 { @@ -36,6 +66,7 @@ cpu1: cpu@1 { <&topckgen CLK_TOP_XTAL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; + mediatek,cci = <&cci>; }; cpu2: cpu@2 { @@ -47,6 +78,7 @@ cpu2: cpu@2 { <&topckgen CLK_TOP_XTAL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; + mediatek,cci = <&cci>; }; cpu3: cpu@3 { @@ -58,6 +90,7 @@ cpu3: cpu@3 { <&topckgen CLK_TOP_XTAL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; + mediatek,cci = <&cci>; }; cluster0_opp: opp-table-0 { diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 6d1d8877b43f..122a57c3780b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -318,6 +318,14 @@ reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; + + afe_dma_mem: audio-dma-pool { + compatible = "shared-dma-pool"; + size = <0 0x100000>; + alignment = <0 0x10>; + no-map; + }; + vpu_dma_reserved: vpu-dma-mem@b7000000 { compatible = "shared-dma-pool"; reg = <0 0xb7000000 0 0x500000>; @@ -887,6 +895,7 @@ afe: audio-controller@11220000 { <&topckgen CLK_TOP_AUD_2_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_APLL1>, <&topckgen CLK_TOP_APLL2>; + memory-region = <&afe_dma_mem>; }; mmc0: mmc@11230000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index ecc6c4d6f1cd..400c61d11035 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -85,6 +85,13 @@ reserved_memory: reserved-memory { #size-cells = <2>; ranges; + afe_dma_mem: audio-dma-pool { + compatible = "shared-dma-pool"; + size = <0 0x100000>; + alignment = <0 0x10>; + no-map; + }; + scp_mem_reserved: memory@50000000 { compatible = "shared-dma-pool"; reg = <0 0x50000000 0 0x2900000>; @@ -199,6 +206,10 @@ tboard_thermistor2: thermal-sensor2 { }; }; +&afe { + memory-region = <&afe_dma_mem>; +}; + &auxadc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts new file mode 100644 index 000000000000..f721ad4e5c97 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-squirtle.dts @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2024 Google LLC + */ + +/dts-v1/; +#include "mt8186-corsola-voltorb.dtsi" + +/ { + model = "Google squirtle board"; + compatible = "google,squirtle", "mediatek,mt8186"; + chassis-type = "convertible"; +}; + +&i2c1 { + touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_s3>; + status = "fail-needs-probe"; + }; + + touchscreen@16 { + compatible = "elan,ekth8d18", "elan,ekth6a12nay"; + reg = <0x16>; + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vcc33-supply = <&pp3300_s3>; + status = "fail-needs-probe"; + }; +}; + +&i2c2 { + trackpad@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + hid-descr-addr = <0x20>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; + vdd-supply = <&pp3300_s3>; + wakeup-source; + status = "fail-needs-probe"; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + /delete-node/ codec@1a; + + rt5650: codec@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>; + avdd-supply = <&mt6366_vio18_reg>; + cpvdd-supply = <&mt6366_vio18_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_codec_pins_default>; + cbj-sleeve-gpios = <&pio 150 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + realtek,dmic1-data-pin = <2>; + realtek,jd-mode = <2>; + }; +}; + +&sound { + compatible = "mediatek,mt8186-mt6366-rt5650-sound"; + model = "mt8186_rt5650"; + + audio-routing = + "Headphone", "HPOL", + "Headphone", "HPOR", + "HDMI1", "TX"; + + hs-playback-dai-link { + codec { + sound-dai = <&rt5650>; + }; + }; + + hs-capture-dai-link { + codec { + sound-dai = <&rt5650>; + }; + }; + + spk-hdmi-playback-dai-link { + codec { + sound-dai = <&it6505dptx>; + }; + }; +}; + +&speaker_codec { + status = "disabled"; +}; + +&trackpad_steelix { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi index e74e886a00cb..8a196dc9a96b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi @@ -118,13 +118,16 @@ &i2c2 { i2c-scl-internal-delay-ns = <22000>; /* second source component */ - trackpad@2c { + trackpad_steelix: trackpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; hid-descr-addr = <0x20>; interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; vdd-supply = <&pp3300_s3>; wakeup-source; + status = "fail-needs-probe"; }; }; @@ -197,3 +200,7 @@ pins-vreg-en { }; }; }; + +&trackpad { + status = "fail-needs-probe"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts index c3ae6f9616c8..4dbf2cb73a81 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts @@ -17,6 +17,8 @@ trackpad@15 { compatible = "hid-over-i2c"; reg = <0x15>; interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; hid-descr-addr = <0x0001>; vdd-supply = <&pp3300_s3>; wakeup-source; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts index 447b57b12b41..ee5bc2cd9e9f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts @@ -19,6 +19,8 @@ trackpad@15 { compatible = "hid-over-i2c"; reg = <0x15>; interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; hid-descr-addr = <0x0001>; vdd-supply = <&pp3300_s3>; wakeup-source; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts deleted file mode 100644 index d16834eec87a..000000000000 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589824.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright 2022 Google LLC - */ - -/dts-v1/; -#include "mt8186-corsola-voltorb.dtsi" - -/ { - model = "Google Voltorb sku589824 board"; - compatible = "google,voltorb-sku589824", "google,voltorb", - "mediatek,mt8186"; -}; diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts similarity index 76% rename from arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts rename to arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts index 45e57f7706cc..cc805408a8b7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb-sku589825.dts +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-voltorb.dts @@ -7,9 +7,8 @@ #include "mt8186-corsola-voltorb.dtsi" / { - model = "Google Voltorb sku589825 board"; - compatible = "google,voltorb-sku589825", "google,voltorb", - "mediatek,mt8186"; + model = "Google Voltorb board"; + compatible = "google,voltorb", "mediatek,mt8186"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi index fc78a79d96e9..ff20376a44d7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi @@ -161,6 +161,13 @@ reserved_memory: reserved-memory { #size-cells = <2>; ranges; + afe_dma_mem: audio-dma-pool { + compatible = "shared-dma-pool"; + size = <0 0x100000>; + alignment = <0 0x10>; + no-map; + }; + adsp_dma_mem: memory@61000000 { compatible = "shared-dma-pool"; reg = <0 0x61000000 0 0x100000>; @@ -310,6 +317,7 @@ &adsp { }; &afe { + memory-region = <&afe_dma_mem>; status = "okay"; }; @@ -390,19 +398,17 @@ &i2c1 { &i2c2 { pinctrl-names = "default"; - /* - * Trackpad pin put here to work around second source components - * sharing the pinmux in steelix designs. - */ - pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; i2c-scl-internal-delay-ns = <10000>; status = "okay"; - trackpad@15 { + trackpad: trackpad@15 { compatible = "elan,ekth3000"; reg = <0x15>; interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pin>; vcc-supply = <&pp3300_s3>; wakeup-source; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts index 8c485c3ced2c..163960f58db5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts @@ -85,8 +85,15 @@ &i2c2 { trackpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; hid-descr-addr = <0x20>; interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>; wakeup-source; + status = "fail-needs-probe"; }; }; + +&trackpad { + status = "fail-needs-probe"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index dd0d07fbe61a..0b4664f044a1 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -199,6 +199,13 @@ reserved_memory: reserved-memory { #size-cells = <2>; ranges; + afe_dma_mem: audio-dma-pool { + compatible = "shared-dma-pool"; + size = <0 0x100000>; + alignment = <0 0x10>; + no-map; + }; + scp_mem_reserved: scp@50000000 { compatible = "shared-dma-pool"; reg = <0 0x50000000 0 0x2900000>; @@ -276,6 +283,10 @@ sound: sound { }; }; +&afe { + memory-region = <&afe_dma_mem>; +}; + &dsi0 { status = "okay"; }; @@ -335,11 +346,13 @@ &i2c2 { clock-frequency = <400000>; clock-stretch-ns = <12600>; pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>, <&trackpad_pins>; + pinctrl-0 = <&i2c2_pins>; - trackpad@15 { + trackpad: trackpad@15 { compatible = "elan,ekth3000"; reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>; vcc-supply = <&pp3300_u>; wakeup-source; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi index eaf45d42cd34..a2cdecd2b903 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi @@ -1161,6 +1161,10 @@ power-key { linux,keycodes = ; wakeup-source; }; + + home { + linux,keycodes = ; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index be5e5f339e81..cf8cd37f5708 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -79,9 +79,21 @@ bl31_secmon_mem: memory@54600000 { reg = <0 0x54600000 0x0 0x200000>; }; - snd_dma_mem: memory@60000000 { + adsp_mem: memory@60000000 { compatible = "shared-dma-pool"; - reg = <0 0x60000000 0 0x1100000>; + reg = <0 0x60000000 0 0xf00000>; + no-map; + }; + + afe_dma_mem: memory@60f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x60f00000 0 0x100000>; + no-map; + }; + + adsp_dma_mem: memory@61000000 { + compatible = "shared-dma-pool"; + reg = <0 0x61000000 0 0x100000>; no-map; }; @@ -179,6 +191,16 @@ wifi_fixed_3v3: regulator-2 { }; }; +&adsp { + memory-region = <&adsp_dma_mem>, <&adsp_mem>; + status = "okay"; +}; + +&afe { + memory-region = <&afe_dma_mem>; + status = "okay"; +}; + &disp_pwm0 { pinctrl-names = "default"; pinctrl-0 = <&disp_pwm0_pins>; @@ -968,6 +990,21 @@ pins { &pmic { interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + + mt6359keys: keys { + compatible = "mediatek,mt6359-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power-key { + linux,keycodes = ; + wakeup-source; + }; + + home { + linux,keycodes = ; + }; + }; }; &scp { @@ -976,6 +1013,26 @@ &scp { status = "okay"; }; +&sound { + compatible = "mediatek,mt8195_mt6359"; + model = "mt8395-evk"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_default_pins>; + audio-routing = + "Headphone", "Headphone L", + "Headphone", "Headphone R"; + mediatek,adsp = <&adsp>; + status = "okay"; + + headphone-dai-link { + link-name = "DL_SRC_BE"; + + codec { + sound-dai = <&pmic 0>; + }; + }; +}; + &spi1 { pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi index fead4dde590d..acd3137d2464 100644 --- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi @@ -32,11 +32,6 @@ gic: interrupt-controller@dfff9000 { #interrupt-cells = <3>; interrupt-controller; #address-cells = <0>; - ppi-partitions { - ppi_cluster0: interrupt-partition-0 { - affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 0fbb8a494dba..171e08c94d5a 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -12,6 +12,7 @@ DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@ DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@ DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@ DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@ +DTC_FLAGS_tegra264-p3971-0089+p3834-0008 := -@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb @@ -31,3 +32,4 @@ dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0008.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb +dtb-$(CONFIG_ARCH_TEGRA_264_SOC) += tegra264-p3971-0089+p3834-0008.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi new file mode 100644 index 000000000000..94ace6784749 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834-0008.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include "tegra264-p3834.dtsi" + +/ { + compatible = "nvidia,p3834-0008", "nvidia,tegra264"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi new file mode 100644 index 000000000000..06795c82427a --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3834.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include "tegra264.dtsi" + +/ { + compatible = "nvidia,p3834", "nvidia,tegra264"; + + aliases { + }; + + bus@0 { + serial@c4e0000 { + status = "okay"; + }; + + serial@c5a0000 { + status = "okay"; + }; + }; + + bus@8100000000 { + iommu@5000000 { + status = "okay"; + }; + + iommu@6000000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts new file mode 100644 index 000000000000..3a6f4b7e6b75 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834-0008.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +/dts-v1/; + +// module files must be included first +#include "tegra264-p3834-0008.dtsi" +#include "tegra264-p3971-0089+p3834.dtsi" + +/ { + model = "NVIDIA P3971-0089+P3834-0008 Engineering Reference Platform"; + compatible = "nvidia,p3971-0089+p3834-0008", "nvidia,p3834-0008", "nvidia,tegra264"; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi new file mode 100644 index 000000000000..46cfa8f1da1c --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089+p3834.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include "tegra264-p3971-0089.dtsi" + +/ { + aliases { + serial0 = &{/bus@0/serial@c4e0000}; + serial1 = &{/bus@0/serial@c5a0000}; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi new file mode 100644 index 000000000000..e8576cf2a0b6 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971-0089.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include "tegra264-p3971.dtsi" diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi new file mode 100644 index 000000000000..6b6259b7310f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi @@ -0,0 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +/ { +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi new file mode 100644 index 000000000000..62c87a387b14 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi @@ -0,0 +1,415 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +#include +#include +#include +#include +#include + +/ { + compatible = "nvidia,tegra264"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + numa-node-id = <0>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + shmem_bpmp: shmem@86070000 { + compatible = "nvidia,tegra264-bpmp-shmem"; + reg = <0x0 0x86070000 0x0 0x2000>; + no-map; + }; + }; + + /* SYSTEM MMIO */ + bus@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0x00 0x00000000 0x01 0x00000000>; + + misc@100000 { + compatible = "nvidia,tegra234-misc"; + reg = <0x0 0x00100000 0x0 0x0f000>, + <0x0 0x0c140000 0x0 0x10000>; + }; + + timer@8000000 { + compatible = "nvidia,tegra234-timer"; + reg = <0x0 0x08000000 0x0 0x140000>; + interrupts = , + , + , + ; + status = "disabled"; + }; + + gpcdma: dma-controller@8400000 { + compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma"; + reg = <0x0 0x08400000 0x0 0x210000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + #dma-cells = <1>; + iommus = <&smmu1 0x00000800>; + dma-coherent; + dma-channel-mask = <0xfffffffe>; + status = "disabled"; + }; + + hsp_top: hsp@8800000 { + compatible = "nvidia,tegra264-hsp"; + reg = <0x0 0x08800000 0x0 0xd0000>; + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "doorbell", "shared0", "shared1", "shared2", + "shared3", "shared4", "shared5", "shared6", + "shared7"; + #mbox-cells = <2>; + }; + + rtc: rtc@c2c0000 { + compatible = "nvidia,tegra264-rtc", "nvidia,tegra20-rtc"; + reg = <0x0 0x0c2c0000 0x0 0x10000>; + interrupt-parent = <&pmc>; + interrupts = <65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA264_CLK_CLK_S>; + clock-names = "rtc"; + status = "disabled"; + }; + + serial@c4e0000 { + compatible = "nvidia,tegra264-utc"; + reg = <0x0 0x0c4e0000 0x0 0x8000>, + <0x0 0x0c4e8000 0x0 0x8000>; + reg-names = "tx", "rx"; + interrupts = ; + rx-threshold = <4>; + tx-threshold = <4>; + status = "disabled"; + }; + + serial@c5a0000 { + compatible = "nvidia,tegra264-utc"; + reg = <0x0 0x0c5a0000 0x0 0x8000>, + <0x0 0x0c5a8000 0x0 0x8000>; + reg-names = "tx", "rx"; + interrupts = ; + rx-threshold = <4>; + tx-threshold = <4>; + status = "disabled"; + }; + + uart0: serial@c5f0000 { + compatible = "arm,sbsa-uart"; + reg = <0x0 0x0c5f0000 0x0 0x10000>; + interrupts = ; + status = "disabled"; + }; + + pmc: pmc@c800000 { + compatible = "nvidia,tegra264-pmc"; + reg = <0x0 0x0c800000 0x0 0x100000>, + <0x0 0x0c990000 0x0 0x10000>, + <0x0 0x0ca00000 0x0 0x10000>, + <0x0 0x0c980000 0x0 0x10000>, + <0x0 0x0c9c0000 0x0 0x40000>; + reg-names = "pmc", "wake", "aotag", "scratch", "misc"; + #interrupt-cells = <2>; + interrupt-controller; + }; + }; + + /* TOP_MMIO */ + bus@8100000000 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0x81 0x00000000 0x01 0x00000000>, /* MMIO */ + <0x01 0x00000000 0x00 0x20000000 0x00 0x40000000>, /* non-prefetchable memory (32-bit) */ + <0x02 0x00000000 0xd0 0x00000000 0x08 0x80000000>; /* ECAM, prefetchable memory, I/O */ + + smmu1: iommu@5000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0x5000000 0x0 0x200000>; + interrupts = , + ; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + + smmu2: iommu@6000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0x6000000 0x0 0x200000>; + interrupts = , + ; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + + mc: memory-controller@8020000 { + compatible = "nvidia,tegra264-mc"; + reg = <0x00 0x8020000 0x0 0x20000>, /* MC broadcast */ + <0x00 0x8040000 0x0 0x20000>, /* MC 0 */ + <0x00 0x8060000 0x0 0x20000>, /* MC 1 */ + <0x00 0x8080000 0x0 0x20000>, /* MC 2 */ + <0x00 0x80a0000 0x0 0x20000>, /* MC 3 */ + <0x00 0x80c0000 0x0 0x20000>, /* MC 4 */ + <0x00 0x80e0000 0x0 0x20000>, /* MC 5 */ + <0x00 0x8100000 0x0 0x20000>, /* MC 6 */ + <0x00 0x8120000 0x0 0x20000>, /* MC 7 */ + <0x00 0x8140000 0x0 0x20000>, /* MC 8 */ + <0x00 0x8160000 0x0 0x20000>, /* MC 9 */ + <0x00 0x8180000 0x0 0x20000>, /* MC 10 */ + <0x00 0x81a0000 0x0 0x20000>, /* MC 11 */ + <0x00 0x81c0000 0x0 0x20000>, /* MC 12 */ + <0x00 0x81e0000 0x0 0x20000>, /* MC 13 */ + <0x00 0x8200000 0x0 0x20000>, /* MC 14 */ + <0x00 0x8220000 0x0 0x20000>; /* MC 15 */ + reg-names = "broadcast", "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", "ch12", "ch13", "ch14", + "ch15"; + interrupts = , + , + , + , + , + , + , + ; + #interconnect-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + + /* limit the DMA range for memory clients to [39:0] */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + + emc: external-memory-controller@8800000 { + compatible = "nvidia,tegra264-emc"; + reg = <0x00 0x8800000 0x0 0x20000>, + <0x00 0x8890000 0x0 0x20000>; + interrupts = ; + clocks = <&bpmp TEGRA264_CLK_EMC>; + clock-names = "emc"; + + #interconnect-cells = <0>; + nvidia,bpmp = <&bpmp>; + }; + }; + + smmu0: iommu@a000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0xa000000 0x0 0x200000>; + interrupts = , + ; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + + smmu4: iommu@b000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0xb000000 0x0 0x200000>; + interrupts = , + ; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + + gic: interrupt-controller@46000000 { + compatible = "arm,gic-v3"; + reg = <0x00 0x46000000 0x0 0x010000>, /* GICD */ + <0x00 0x46080000 0x0 0x400000>; /* GICR */ + interrupt-parent = <&gic>; + interrupts = ; + + redistributor-stride = <0x0 0x40000>; + #redistributor-regions = <1>; + #interrupt-cells = <3>; + interrupt-controller; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x0 0x00 0x46000000 0x0 0x1000000>; + + its: msi-controller@40000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x40000 0x0 0x40000>; + #msi-cells = <1>; + msi-controller; + }; + }; + }; + + /* DISP_USB MMIO */ + bus@8800000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0x88 0x00000000 0x01 0x00000000>; + + smmu3: iommu@6000000 { + compatible = "arm,smmu-v3"; + reg = <0x00 0x6000000 0x0 0x200000>; + interrupts = , + ; + interrupt-names = "eventq", "gerror"; + status = "disabled"; + + #iommu-cells = <1>; + dma-coherent; + }; + }; + + /* UPHY MMIO */ + bus@a800000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0xa8 0x00000000 0x40 0x00000000>, /* MMIO, ECAM, prefetchable memory, I/O */ + <0x80 0x00000000 0x00 0x20000000 0x00 0x40000000>; /* non-prefetchable memory (32-bit) */ + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,armv8"; + device_type = "cpu"; + reg = <0x00000>; + status = "okay"; + + enable-method = "psci"; + numa-node-id = <0>; + + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + }; + + cpu1: cpu@1 { + compatible = "arm,armv8"; + device_type = "cpu"; + reg = <0x10000>; + status = "okay"; + + enable-method = "psci"; + numa-node-id = <0>; + + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + }; + }; + + bpmp: bpmp { + compatible = "nvidia,tegra264-bpmp", "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; + memory-region = <&shmem_bpmp>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + status = "okay"; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + , + ; + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 669b888b27a1..4bfa926b6a08 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,12 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb -apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo +apq8016-sbc-d3-camera-mezzanine-dtbs := apq8016-sbc.dtb apq8016-sbc-d3-camera-mezzanine.dtbo +apq8016-sbc-usb-host-dtbs := apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo dtb-$(CONFIG_ARCH_QCOM) += sar2130p-qar2130p.dtb -dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-d3-camera-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc-usb-host.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-schneider-hmibsc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb @@ -77,6 +78,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8976-longcheer-l9360.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-h815.dtb @@ -309,6 +311,8 @@ x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs := x1e78100-lenovo-thinkpad-t14s-ole dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb x1e78100-lenovo-thinkpad-t14s-oled-el2.dtb x1e80100-asus-vivobook-s15-el2-dtbs := x1e80100-asus-vivobook-s15.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb x1e80100-asus-vivobook-s15-el2.dtb +x1e80100-asus-zenbook-a14-el2-dtbs := x1e80100-asus-zenbook-a14.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb x1e80100-crd-el2-dtbs := x1e80100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb x1e80100-crd-el2.dtb x1e80100-dell-xps13-9345-el2-dtbs := x1e80100-dell-xps13-9345.dtb x1-el2.dtbo @@ -325,5 +329,7 @@ x1e80100-microsoft-romulus15-el2-dtbs := x1e80100-microsoft-romulus15.dtb x1-el2 dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb x1e80100-qcp-el2-dtbs := x1e80100-qcp.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb +x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso similarity index 89% rename from arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts rename to arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso index f9cbf8c1d689..d739ece6b44f 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dtso @@ -5,10 +5,12 @@ */ /dts-v1/; +/plugin/; -#include "apq8016-sbc.dts" +#include +#include -/ { +&{/} { camera_vdddo_1v8: regulator-camera-vdddo { compatible = "regulator-fixed"; regulator-name = "camera_vdddo"; @@ -38,6 +40,9 @@ &camss { status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; csiphy0_ep: endpoint { @@ -53,6 +58,9 @@ &cci { }; &cci_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + camera@3b { compatible = "ovti,ov5640"; reg = <0x3b>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 7f0faf26b707..bfe59b020841 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -885,8 +885,24 @@ pcie0: pcie@20000000 { ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>; - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 78e1992b7495..fffb47ec2448 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -847,8 +847,24 @@ pcie1: pcie@10000000 { ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 142 @@ -919,8 +935,24 @@ pcie0: pcie@20000000 { ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 75 diff --git a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts new file mode 100644 index 000000000000..e524d58cf0a4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, André Apitzsch + */ + +/dts-v1/; + +#include + +#include "msm8976.dtsi" +#include "pm8004.dtsi" +#include "pm8950.dtsi" + +/ { + model = "BQ Aquaris X5 Plus (Longcheer L9360)"; + compatible = "longcheer,l9360", "qcom,msm8976"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@83200000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x83200000 0x0 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_sensor_default>, <&volume_up_default>; + pinctrl-names = "default"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&tlmm 101 GPIO_ACTIVE_HIGH>; + color = ; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + + pinctrl-0 = <&button_backlight_default>; + pinctrl-names = "default"; + }; + }; + + reg_ts_vdd: regulator-vdd-ts { + compatible = "regulator-fixed"; + regulator-name = "regulator-vdd-ts"; + + gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + framebuffer@83000000 { + reg = <0x0 0x83000000 0x0 0x2800000>; + no-map; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + }; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + }; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + nfc@28 { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupts-extended = <&tlmm 140 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 109 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&nfc_default>; + pinctrl-1 = <&nfc_sleep>; + pinctrl-names = "default", "sleep"; + }; +}; + +&blsp2_i2c2 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + + interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&ts_int_default>, <&ts_reset_default>; + pinctrl-1 = <&ts_int_sleep>, <&ts_reset_sleep>; + pinctrl-names = "default", "sleep"; + + vdd-supply = <&pm8950_l6>; + vio-supply = <®_ts_vdd>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&gcc { + vdd_gfx-supply = <&pm8004_s5>; +}; + +&pm8004_spmi_regulators { + vdd_s2-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + + /* Cluster 1 supply */ + pm8004_s2: s2 { + /* regulator-min-microvolt = <500000>; */ + /* Set .95V to prevent unstabilities until CPR for this SoC is done */ + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-name = "vdd_apc1"; + /* Set always on until the CPU PLL is done */ + regulator-always-on; + regulator-boot-on; + }; + + pm8004_s5: s5 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-enable-ramp-delay = <500>; + regulator-name = "vdd_gfx"; + /* Hack this on until the gpu driver is ready for it */ + regulator-always-on; + }; +}; + +&pm8950_resin { + linux,code = ; + status = "okay"; +}; + +&pm8950_spmi_regulators { + vdd_s5-supply = <&vph_pwr>; + + /* Cluster 0 supply */ + pm8950_spmi_s5: s5 { + /* Set .95V to prevent unstabilities until CPR for this SoC is done */ + /* regulator-min-microvolt = <500000>; */ + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1165000>; + regulator-name = "vdd_apc0"; + /* Set always on until the CPU PLL is done */ + regulator-always-on; + regulator-boot-on; + }; +}; + +&rpm_requests { + pm8950_regulators: regulators { + compatible = "qcom,rpm-pm8950-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_l1_l19-supply = <&pm8950_s3>; + vdd_l2_l23-supply = <&pm8950_s3>; + vdd_l3-supply = <&pm8950_s3>; + vdd_l5_l6_l7_l16-supply = <&pm8950_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + + pm8950_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1162500>; + }; + + pm8950_s3: s3 { + regulator-min-microvolt = <1325000>; + regulator-max-microvolt = <1325000>; + }; + + pm8950_s4: s4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8950_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8950_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8950_l3: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8950_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8950_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8950_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8950_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8950_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8950_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8950_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8950_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8950_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8950_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8950_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8950_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8950_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdhc_1 { + bus-width = <8>; + non-removable; + vmmc-supply = <&pm8950_l8>; + vqmmc-supply = <&pm8950_l5>; + status = "okay"; +}; + +&sdhc_2 { + bus-width = <4>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8950_l11>; + vqmmc-supply = <&pm8950_l12>; + + pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + button_backlight_default: button-backlight-default-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hall_sensor_default: hall-sensor-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_default: nfc-default-state { + pins = "gpio122", "gpio140"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_sleep: nfc-sleep-state { + int-pins { + pins = "gpio140"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + ven-pins { + pins = "gpio122"; + function = "gpio"; + drive-strength = <6>; + bias-disable; + }; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_sleep: sdc2-cd-sleep-state { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_int_default: ts-int-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_int_sleep: ts-int-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_reset_default: ts-reset-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_sleep: ts-sleep-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + volume_up_default: volume-up-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index e2ac2fd6882f..f9962512f243 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -782,6 +782,42 @@ blsp2_i2c4_sleep: blsp2-i2c4-sleep-state { bias-disable; }; + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + wcss_wlan_default: wcss-wlan-default-state { wcss-wlan2-pins { pins = "gpio40"; @@ -1331,6 +1367,7 @@ blsp1_dma: dma-controller@7884000 { clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; + qcom,controlled-remotely; }; blsp1_uart1: serial@78af000 { @@ -1451,6 +1488,7 @@ blsp2_dma: dma-controller@7ac4000 { clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; + qcom,controlled-remotely; }; blsp2_uart2: serial@7af0000 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index ede851fbf628..f91605de4909 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1910,8 +1910,22 @@ pcie0: pcie@600000 { device_type = "pci"; - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1973,8 +1987,22 @@ pcie1: pcie@608000 { device_type = "pci"; - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2034,8 +2062,22 @@ pcie2: pcie@610000 { device_type = "pci"; - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 58cee37cb8ee..0b0a9379cb05 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -936,8 +936,24 @@ pcie0: pcie@1c00000 { <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; #interrupt-cells = <1>; - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index f49ac1c1f8a3..fa24b77a31a7 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -1628,6 +1628,109 @@ adreno_smmu: iommu@59a0000 { #iommu-cells = <2>; }; + camss: camss@5c6e000 { + compatible = "qcom,qcm2290-camss"; + + reg = <0x0 0x5c6e000 0x0 0x1000>, + <0x0 0x5c75000 0x0 0x1000>, + <0x0 0x5c52000 0x0 0x1000>, + <0x0 0x5c53000 0x0 0x1000>, + <0x0 0x5c66000 0x0 0x400>, + <0x0 0x5c68000 0x0 0x400>, + <0x0 0x5c11000 0x0 0x1000>, + <0x0 0x5c6f000 0x0 0x4000>, + <0x0 0x5c76000 0x0 0x4000>; + reg-names = "csid0", + "csid1", + "csiphy0", + "csiphy1", + "csitpg0", + "csitpg1", + "top", + "vfe0", + "vfe1"; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMSS_AXI_CLK>, + <&gcc GCC_CAMSS_NRT_AXI_CLK>, + <&gcc GCC_CAMSS_RT_AXI_CLK>, + <&gcc GCC_CAMSS_TFE_0_CSID_CLK>, + <&gcc GCC_CAMSS_TFE_1_CSID_CLK>, + <&gcc GCC_CAMSS_CPHY_0_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CPHY_1_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_TFE_0_CLK>, + <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>, + <&gcc GCC_CAMSS_TFE_1_CLK>, + <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ; + clock-names = "ahb", + "axi", + "camnoc_nrt_axi", + "camnoc_rt_axi", + "csi0", + "csi1", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "top_ahb", + "vfe0", + "vfe0_cphy_rx", + "vfe1", + "vfe1_cphy_rx"; + + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "csid0", + "csid1", + "csiphy0", + "csiphy1", + "csitpg0", + "csitpg1", + "vfe0", + "vfe1"; + + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>, + <&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "ahb", + "hf_mnoc", + "sf_mnoc"; + + iommus = <&apps_smmu 0x400 0x0>, + <&apps_smmu 0x800 0x0>, + <&apps_smmu 0x820 0x0>, + <&apps_smmu 0x840 0x0>; + + power-domains = <&gcc GCC_CAMSS_TOP_GDSC>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + }; + }; + mdss: display-subsystem@5e00000 { compatible = "qcom,qcm2290-mdss"; reg = <0x0 0x05e00000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 2b5aa3c66867..a6652e4817d1 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -240,6 +240,18 @@ &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcs615/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs615/cdsp.mbn"; + + status = "okay"; +}; + &rpmhcc { clocks = <&xo_board_clk>; }; diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi index bb8b6c3ebd03..bfbb21035492 100644 --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi @@ -332,6 +332,50 @@ mc_virt: interconnect-2 { qcom,bcm-voters = <&apps_bcm_voter>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts = ; + /* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */ + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts = ; + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + qup_opp_table: opp-table-qup { compatible = "operating-points-v2"; opp-shared; @@ -429,6 +473,16 @@ smem_region: smem@86000000 { no-map; hwlocks = <&tcsr_mutex 3>; }; + + rproc_cdsp_mem: rproc-cdsp@93b00000 { + reg = <0x0 0x93b00000 0x0 0x1e00000>; + no-map; + }; + + rproc_adsp_mem: rproc-adsp@95900000 { + reg = <0x0 0x95900000 0x0 0x1e00000>; + no-map; + }; }; soc: soc@0 { @@ -1902,6 +1956,7 @@ replicator@604a000 { clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + status = "disabled"; in-ports { port { @@ -2461,6 +2516,9 @@ cti@6c13000 { clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + + /* Not all required clocks can be enabled from the OS */ + status = "fail"; }; cti@6c20000 { @@ -3073,6 +3131,44 @@ cti@7900000 { clock-names = "apb_pclk"; }; + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>; + power-domain-names = "cx"; + + memory-region = <&rproc_cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + mboxes = <&apss_shared 4>; + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; + pmu@90b6300 { compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0x0 0x090b6300 0x0 0x600>; @@ -3245,6 +3341,20 @@ sram@c3f0000 { reg = <0x0 0x0c3f0000 0x0 0x400>; }; + sram@14680000 { + compatible = "qcom,qcs615-imem", "syscon", "simple-mfd"; + reg = <0x0 0x14680000 0x0 0x2c000>; + ranges = <0 0 0x14680000 0x2c000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@2a94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x2a94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,qcs615-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x15000000 0x0 0x80000>; @@ -3692,6 +3802,44 @@ usb_2_dwc3: usb@a800000 { maximum-speed = "high-speed"; }; }; + + remoteproc_adsp: remoteproc@62400000 { + compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas"; + reg = <0x0 0x62400000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>; + power-domain-names = "cx"; + + memory-region = <&rproc_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink_edge: glink-edge { + interrupts = ; + mboxes = <&apss_shared 24>; + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; }; arch_timer: timer { diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts index 3ff8f398cad3..8c166ead912c 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -304,6 +304,10 @@ usb2_en: usb2-en-state { }; }; +&iris { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi index 009f9658a4fa..7ada029c32c1 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi @@ -4211,6 +4211,77 @@ usb_2_dwc3: usb@a400000 { }; }; + iris: video-codec@aa00000 { + compatible = "qcom,qcs8300-iris"; + + reg = <0x0 0x0aa00000 0x0 0xf0000>; + interrupts = ; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd RPMHPD_MX>, + <&rpmhpd RPMHPD_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "bus"; + + iommus = <&apps_smmu 0x0880 0x0400>, + <&apps_smmu 0x0887 0x0400>; + dma-coherent; + + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + required-opps = <&rpmhpd_opp_turbo_l1>, + <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + videocc: clock-controller@abf0000 { compatible = "qcom,qcs8300-videocc"; reg = <0x0 0x0abf0000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso index 5fe331923dd3..771baf7e09e6 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dtso @@ -9,10 +9,6 @@ #include #include -&camcc { - status = "okay"; -}; - &camss { vdda-phy-supply = <&vreg_l5a_0p88>; vdda-pll-supply = <&vreg_l9a_1p2>; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi index 3ae416ab66e8..63b3031cfcc1 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi @@ -28,6 +28,64 @@ chosen { stdout-path = "serial0:115200n8"; }; + vreg_12p0: vreg-12p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_12P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vreg_5p0: vreg-5p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_5P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vreg_12p0>; + }; + + vreg_1p8: vreg-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_5p0>; + }; + + vreg_1p0: vreg-1p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + vin-supply = <&vreg_1p8>; + }; + + vreg_3p0: vreg-3p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "VREG_3P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&vreg_12p0>; + }; + vreg_conn_1p8: vreg_conn_1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; @@ -128,6 +186,30 @@ dp1_connector_in: endpoint { }; }; }; + + dp-dsi0-connector { + compatible = "dp-connector"; + label = "DSI0"; + type = "full-size"; + + port { + dp_dsi0_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge0_out>; + }; + }; + }; + + dp-dsi1-connector { + compatible = "dp-connector"; + label = "DSI1"; + type = "full-size"; + + port { + dp_dsi1_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge1_out>; + }; + }; + }; }; &apps_rsc { @@ -513,6 +595,113 @@ &i2c11 { &i2c18 { clock-frequency = <400000>; + + status = "okay"; + + io_expander: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + interrupts-extended = <&tlmm 98 IRQ_TYPE_EDGE_BOTH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&io_expander_intr_active>, + <&io_expander_reset_active>; + pinctrl-names = "default"; + }; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + + #size-cells = <0>; + reg = <0x70>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 2 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&io_expander 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge0_in: endpoint { + remote-endpoint = <&mdss0_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge0_out: endpoint { + remote-endpoint = <&dp_dsi0_connector_in>; + }; + }; + }; + }; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 10 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&io_expander 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&io_expander 8 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge1_in: endpoint { + remote-endpoint = <&mdss0_dsi1_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge1_out: endpoint { + remote-endpoint = <&dp_dsi1_connector_in>; + }; + }; + }; + }; + }; + }; + +}; + +&iris { + firmware-name = "qcom/vpu/vpu30_p4_s6.mbn"; + status = "okay"; }; @@ -560,6 +749,40 @@ &mdss0_dp1_phy { status = "okay"; }; +&mdss0_dsi0 { + vdda-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&mdss0_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&dsi2dp_bridge0_in>; +}; + +&mdss0_dsi0_phy { + vdds-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&mdss0_dsi1 { + vdda-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&mdss0_dsi1_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&dsi2dp_bridge1_in>; +}; + +&mdss0_dsi1_phy { + vdds-supply = <&vreg_l4a>; + + status = "okay"; +}; + &pmm8654au_0_gpios { gpio-line-names = "DS_EN", "POFF_COMPLETE", @@ -753,6 +976,21 @@ ethernet0_mdio: ethernet0-mdio-pins { }; }; + io_expander_intr_active: io-expander-intr-active-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + io_expander_reset_active: io-expander-reset-active-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + pcie0_default_state: pcie0-default-state { perst-pins { pins = "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 45f536633f64..fed34717460f 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -6,11 +6,14 @@ #include #include +#include #include #include #include #include +#include #include +#include #include #include #include @@ -51,6 +54,11 @@ cpu0: cpu@0 { next-level-cache = <&l2_0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; l2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -75,6 +83,11 @@ cpu1: cpu@100 { next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; l2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -94,6 +107,11 @@ cpu2: cpu@200 { next-level-cache = <&l2_2>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; l2_2: l2-cache { compatible = "cache"; cache-level = <2>; @@ -113,6 +131,11 @@ cpu3: cpu@300 { next-level-cache = <&l2_3>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; l2_3: l2-cache { compatible = "cache"; cache-level = <2>; @@ -132,6 +155,11 @@ cpu4: cpu@10000 { next-level-cache = <&l2_4>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; l2_4: l2-cache { compatible = "cache"; cache-level = <2>; @@ -157,6 +185,11 @@ cpu5: cpu@10100 { next-level-cache = <&l2_5>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; l2_5: l2-cache { compatible = "cache"; cache-level = <2>; @@ -176,6 +209,11 @@ cpu6: cpu@10200 { next-level-cache = <&l2_6>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; l2_6: l2-cache { compatible = "cache"; cache-level = <2>; @@ -195,6 +233,11 @@ cpu7: cpu@10300 { next-level-cache = <&l2_7>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; l2_7: l2-cache { compatible = "cache"; cache-level = <2>; @@ -284,6 +327,176 @@ cluster_sleep_apss_rsc_pc: cluster-sleep-1 { }; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1939200000 { + opp-hz = /bits/ 64 <1939200000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2188800000 { + opp-hz = /bits/ 64 <2188800000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2265600000 { + opp-hz = /bits/ 64 <2265600000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <(1555200 * 4) (921600 * 32)>; + }; + + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-1939200000 { + opp-hz = /bits/ 64 <1939200000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <(1708800 * 4) (1228800 * 32)>; + }; + + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2188800000 { + opp-hz = /bits/ 64 <2188800000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2265600000 { + opp-hz = /bits/ 64 <2265600000>; + opp-peak-kBps = <(2092800 * 4) (1555200 * 32)>; + }; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2457600000 { + opp-hz = /bits/ 64 <2457600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <(3196800 * 4) (1708800 * 32)>; + }; + }; + dummy-sink { compatible = "arm,coresight-dummy-sink"; @@ -4049,6 +4262,76 @@ llcc: system-cache-controller@9200000 { interrupts = ; }; + iris: video-codec@aa00000 { + compatible = "qcom,sa8775p-iris", "qcom,sm8550-iris"; + + reg = <0x0 0x0aa00000 0x0 0xf0000>; + interrupts = ; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd SA8775P_MX>, + <&rpmhpd SA8775P_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&pil_video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "bus"; + + iommus = <&apps_smmu 0x0880 0x0400>, + <&apps_smmu 0x0887 0x0400>; + dma-coherent; + + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + required-opps = <&rpmhpd_opp_turbo_l1>, + <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + videocc: clock-controller@abf0000 { compatible = "qcom,sa8775p-videocc"; reg = <0x0 0x0abf0000 0x0 0x10000>; @@ -4156,6 +4439,22 @@ dpu_intf4_out: endpoint { remote-endpoint = <&mdss0_dp1_in>; }; }; + + port@2 { + reg = <2>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss0_dsi0_in>; + }; + }; + + port@3 { + reg = <3>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss0_dsi1_in>; + }; + }; }; mdss0_mdp_opp_table: opp-table { @@ -4183,6 +4482,161 @@ opp-650000000 { }; }; + mdss0_dsi0: dsi@ae94000 { + compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss0>; + interrupts = <4>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_ESC0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>; + phys = <&mdss0_dsi0_phy>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SA8775P_MMCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dsi0_out: endpoint{ }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss0_dsi0_phy: phy@ae94400 { + compatible = "qcom,sa8775p-dsi-phy-5nm"; + reg = <0x0 0x0ae94400 0x0 0x200>, + <0x0 0x0ae94600 0x0 0x280>, + <0x0 0x0ae94900 0x0 0x27c>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss0_dsi1: dsi@ae96000 { + compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae96000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss0>; + interrupts = <5>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_ESC1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>; + phys = <&mdss0_dsi1_phy>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SA8775P_MMCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss0_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss0_dsi1_out: endpoint { }; + }; + }; + }; + + mdss0_dsi1_phy: phy@ae96400 { + compatible = "qcom,sa8775p-dsi-phy-5nm"; + reg = <0x0 0x0ae96400 0x0 0x200>, + <0x0 0x0ae96600 0x0 0x280>, + <0x0 0x0ae96900 0x0 0x27c>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + mdss0_dp0_phy: phy@aec2a00 { compatible = "qcom,sa8775p-edp-phy"; @@ -4389,7 +4843,10 @@ dispcc0: clock-controller@af00000 { <&sleep_clk>, <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>, <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>, - <0>, <0>, <0>, <0>; + <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>; power-domains = <&rpmhpd SA8775P_MMCX>; #clock-cells = <1>; #reset-cells = <1>; @@ -5548,6 +6005,15 @@ rpmhpd_opp_turbo_l1: opp-9 { }; }; + epss_l3_cl0: interconnect@18590000 { + compatible = "qcom,sa8775p-epss-l3", + "qcom,epss-l3"; + reg = <0x0 0x18590000 0x0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@18591000 { compatible = "qcom,sa8775p-cpufreq-epss", "qcom,cpufreq-epss"; @@ -5565,14 +6031,23 @@ cpufreq_hw: cpufreq@18591000 { #freq-domain-cells = <1>; }; + epss_l3_cl1: interconnect@18592000 { + compatible = "qcom,sa8775p-epss-l3", + "qcom,epss-l3"; + reg = <0x0 0x18592000 0x0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + remoteproc_gpdsp0: remoteproc@20c00000 { compatible = "qcom,sa8775p-gpdsp0-pas"; reg = <0x0 0x20c00000 0x0 0x10000>; interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, <&smp2p_gpdsp0_in 0 0>, - <&smp2p_gpdsp0_in 2 0>, <&smp2p_gpdsp0_in 1 0>, + <&smp2p_gpdsp0_in 2 0>, <&smp2p_gpdsp0_in 3 0>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -5614,8 +6089,8 @@ remoteproc_gpdsp1: remoteproc@21c00000 { interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>, <&smp2p_gpdsp1_in 0 0>, - <&smp2p_gpdsp1_in 2 0>, <&smp2p_gpdsp1_in 1 0>, + <&smp2p_gpdsp1_in 2 0>, <&smp2p_gpdsp1_in 3 0>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -5755,8 +6230,8 @@ remoteproc_cdsp0: remoteproc@26300000 { interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -5887,8 +6362,8 @@ remoteproc_cdsp1: remoteproc@2a300000 { interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -6043,8 +6518,8 @@ remoteproc_adsp: remoteproc@30000000 { interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; @@ -7120,9 +7595,17 @@ pcie0: pcie@1c00000 { , , , - ; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, @@ -7278,9 +7761,17 @@ pcie1: pcie@1c10000 { , , , - ; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi index b0e342810ae7..e400ea4cdee8 100644 --- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi +++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi @@ -1289,7 +1289,8 @@ pcie0: pcie@1c00000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1297,7 +1298,8 @@ pcie0: pcie@1c00000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1406,7 +1408,8 @@ pcie1: pcie@1c08000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1414,7 +1417,8 @@ pcie1: pcie@1c08000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 01e727b021ec..3afb69921be3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -3526,18 +3526,18 @@ spmi_bus: spmi@c440000 { #interrupt-cells = <4>; }; - sram@146aa000 { + sram@14680000 { compatible = "qcom,sc7180-imem", "syscon", "simple-mfd"; - reg = <0 0x146aa000 0 0x2000>; + reg = <0 0x14680000 0 0x2e000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0x146aa000 0x2000>; + ranges = <0 0 0x14680000 0x2e000>; - pil-reloc@94c { + pil-reloc@2a94c { compatible = "qcom,pil-reloc-info"; - reg = <0x94c 0xc8>; + reg = <0x2a94c 0xc8>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index b1cc3bc1aec8..64a2abd30100 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2227,9 +2227,17 @@ pcie1: pcie@1c08000 { , , , - ; - interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index b84e47a461a0..f4f1d6a11960 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -1726,7 +1727,8 @@ pcie0: pcie@1c00000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1734,7 +1736,8 @@ pcie0: pcie@1c00000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1747,17 +1750,13 @@ pcie0: pcie@1c00000 { <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -1847,7 +1846,8 @@ pcie3: pcie@1c08000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1855,7 +1855,8 @@ pcie3: pcie@1c08000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1868,17 +1869,13 @@ pcie3: pcie@1c08000 { <&gcc GCC_PCIE_3_CFG_AHB_CLK>, <&gcc GCC_PCIE_3_MSTR_AXI_CLK>, <&gcc GCC_PCIE_3_SLV_AXI_CLK>, - <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_3_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -1969,7 +1966,8 @@ pcie1: pcie@1c10000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1977,7 +1975,8 @@ pcie1: pcie@1c10000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1990,17 +1989,13 @@ pcie1: pcie@1c10000 { <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -2091,7 +2086,8 @@ pcie2: pcie@1c18000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -2099,7 +2095,8 @@ pcie2: pcie@1c18000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2112,17 +2109,13 @@ pcie2: pcie@1c18000 { <&gcc GCC_PCIE_2_CFG_AHB_CLK>, <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, <&gcc GCC_PCIE_2_SLV_AXI_CLK>, - <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_2_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; @@ -2934,6 +2927,19 @@ usb_sec_dwc3_ss: endpoint { }; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc8180x-camcc"; + reg = <0 0x0ad00000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + power-domains = <&rpmhpd SC8180X_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sc8180x-mdss"; reg = <0 0x0ae00000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 3bc8471c658b..c0f466d96630 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2327,8 +2327,24 @@ pcie0: pcie@1c00000 { ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2436,8 +2452,24 @@ pcie1: pcie@1c08000 { ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - interrupts = ; - interrupt-names = "msi"; + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -5081,18 +5113,18 @@ spmi_bus: spmi@c440000 { #interrupt-cells = <4>; }; - sram@146bf000 { + sram@14680000 { compatible = "qcom,sdm845-imem", "syscon", "simple-mfd"; - reg = <0 0x146bf000 0 0x1000>; + reg = <0 0x14680000 0 0x40000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0x146bf000 0x1000>; + ranges = <0 0 0x14680000 0x40000>; - pil-reloc@94c { + pil-reloc@3f94c { compatible = "qcom,pil-reloc-info"; - reg = <0x94c 0xc8>; + reg = <0x3f94c 0xc8>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 3b28c543fd96..8ef6db3be6e3 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -624,6 +624,12 @@ dai@2 { }; }; +&slpi_pas { + firmware-name = "qcom/sdm850/LENOVO/81JL/qcslpi850.mbn"; + + status = "okay"; +}; + &sound { compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; model = "Lenovo-YOGA-C630-13Q50"; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index c8865779173e..91fc36b59abf 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -721,6 +721,13 @@ qup_spi5_default: qup-spi5-default-state { bias-pull-up; }; + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + sdc1_state_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; @@ -1565,6 +1572,8 @@ uart4: serial@4a90000 { reg = <0x0 0x04a90000 0x0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_default>; interrupts = ; interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index f80b21d28a92..ff1eb2c53e7b 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -19,7 +19,9 @@ #include #include #include +#include #include +#include #include / { @@ -1320,6 +1322,63 @@ IPCC_MPROC_SIGNAL_GLINK_QMP label = "lpass"; qcom,remote-pid = <2>; + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = ; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1001 0x0>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -1953,6 +2012,20 @@ usb_1_dwc3_ss_out: endpoint { }; }; + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm6350-videocc"; + reg = <0x0 0x0aaf0000 0x0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "iface", + "bi_tcxo", + "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + cci0: cci@ac4a000 { compatible = "qcom,sm6350-cci", "qcom,msm8996-cci"; reg = <0x0 0x0ac4a000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index cdb47359c4c8..abf12e10d33f 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1853,7 +1853,8 @@ pcie0: pcie@1c00000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1861,7 +1862,8 @@ pcie0: pcie@1c00000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1874,17 +1876,13 @@ pcie0: pcie@1c00000 { <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "tbu", - "ref"; + "slave_q2a"; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1970,7 +1968,8 @@ pcie1: pcie@1c08000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1978,7 +1977,8 @@ pcie1: pcie@1c08000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1991,17 +1991,13 @@ pcie1: pcie@1c08000 { <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "tbu", - "ref"; + "slave_q2a"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index f0d18fd37aaf..b30aea8b0540 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2150,7 +2150,8 @@ pcie0: pcie@1c00000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -2158,7 +2159,8 @@ pcie0: pcie@1c00000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2270,7 +2272,8 @@ pcie1: pcie@1c08000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -2278,7 +2281,8 @@ pcie1: pcie@1c08000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -2395,7 +2399,8 @@ pcie2: pcie@1c10000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -2403,7 +2408,8 @@ pcie2: pcie@1c10000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -4653,7 +4659,6 @@ camcc: clock-controller@ad00000 { clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; power-domains = <&rpmhpd RPMHPD_MMCX>; required-opps = <&rpmhpd_opp_low_svs>; - status = "disabled"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 971c828a7555..9a4207ead615 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1538,7 +1538,8 @@ pcie0: pcie@1c00000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1546,7 +1547,8 @@ pcie0: pcie@1c00000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ @@ -1647,7 +1649,8 @@ pcie1: pcie@1c08000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -1655,7 +1658,8 @@ pcie1: pcie@1c08000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 54c6d0fdb2af..33574ad706b9 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -3739,6 +3739,7 @@ aoss_qmp: power-management@c300000 { sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c400000 { diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 71a7e3b57ece..45713d46f3c5 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -3406,6 +3406,216 @@ cci2_i2c1: i2c-bus@1 { }; }; + camss: isp@acb7000 { + compatible = "qcom,sm8550-camss"; + + reg = <0x0 0x0acb7000 0x0 0x0d00>, + <0x0 0x0acb9000 0x0 0x0d00>, + <0x0 0x0acbb000 0x0 0x0d00>, + <0x0 0x0acca000 0x0 0x0a00>, + <0x0 0x0acce000 0x0 0x0a00>, + <0x0 0x0acb6000 0x0 0x1000>, + <0x0 0x0ace4000 0x0 0x2000>, + <0x0 0x0ace6000 0x0 0x2000>, + <0x0 0x0ace8000 0x0 0x2000>, + <0x0 0x0acea000 0x0 0x2000>, + <0x0 0x0acec000 0x0 0x2000>, + <0x0 0x0acee000 0x0 0x2000>, + <0x0 0x0acf0000 0x0 0x2000>, + <0x0 0x0acf2000 0x0 0x2000>, + <0x0 0x0ac62000 0x0 0xf000>, + <0x0 0x0ac71000 0x0 0xf000>, + <0x0 0x0ac80000 0x0 0xf000>, + <0x0 0x0accb000 0x0 0x1800>, + <0x0 0x0accf000 0x0 0x1800>; + reg-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csid_wrapper", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csiphy6", + "csiphy7", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>, + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>, + <&camcc CAM_CC_CPAS_IFE_0_CLK>, + <&camcc CAM_CC_CPAS_IFE_1_CLK>, + <&camcc CAM_CC_CPAS_IFE_2_CLK>, + <&camcc CAM_CC_CSID_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY6_CLK>, + <&camcc CAM_CC_CSI6PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY7_CLK>, + <&camcc CAM_CC_CSI7PHYTIMER_CLK>, + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_2_CLK>, + <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cpas_fast_ahb_clk", + "cpas_ife_lite", + "cpas_vfe0", + "cpas_vfe1", + "cpas_vfe2", + "csid", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "csiphy6", + "csiphy6_timer", + "csiphy7", + "csiphy7_timer", + "csiphy_rx", + "gcc_axi_hf", + "vfe0", + "vfe0_fast_ahb", + "vfe1", + "vfe1_fast_ahb", + "vfe2", + "vfe2_fast_ahb", + "vfe_lite", + "vfe_lite_ahb", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csiphy6", + "csiphy7", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ahb", + "hf_0_mnoc"; + + iommus = <&apps_smmu 0x800 0x20>; + + power-domains = <&camcc CAM_CC_IFE_0_GDSC>, + <&camcc CAM_CC_IFE_1_GDSC>, + <&camcc CAM_CC_IFE_2_GDSC>, + <&camcc CAM_CC_TITAN_TOP_GDSC>; + power-domain-names = "ife0", + "ife1", + "ife2", + "top"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + }; + + port@5 { + reg = <5>; + }; + + port@6 { + reg = <6>; + }; + + port@7 { + reg = <7>; + }; + }; + }; + camcc: clock-controller@ade0000 { compatible = "qcom,sm8550-camcc"; reg = <0 0x0ade0000 0 0x20000>; @@ -4024,6 +4234,7 @@ aoss_qmp: power-management@c300000 { sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c400000 { diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts index d0912735b54e..259649d7dcd7 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -894,6 +894,10 @@ &ipa { status = "okay"; }; +&iris { + status = "okay"; +}; + &gpu { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index 76ef43c10f77..8a957adbfb38 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -585,6 +585,10 @@ vreg_l7n_3p3: ldo7 { }; }; +&iris { + status = "okay"; +}; + &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio21"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 71033fba21b5..7552d5d3fb40 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -824,6 +824,10 @@ &ipa { status = "okay"; }; +&iris { + status = "okay"; +}; + &gpu { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 495ea9bfd008..e14d3d778b71 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -4962,6 +4962,99 @@ opp-202000000 { }; }; + iris: video-codec@aa00000 { + compatible = "qcom,sm8650-iris"; + reg = <0 0x0aa00000 0 0xf0000>; + + interrupts = ; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, + <&videocc VIDEO_CC_XO_CLK_ARES>, + <&videocc VIDEO_CC_MVS0C_CLK_ARES>; + reset-names = "bus", + "xo", + "core"; + + iommus = <&apps_smmu 0x1940 0>, + <&apps_smmu 0x1947 0>; + + dma-coherent; + + /* + * IRIS firmware is signed by vendors, only + * enable in boards where the proper signed firmware + * is available. + */ + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-196000000 { + opp-hz = /bits/ 64 <196000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>, + <&rpmhpd_opp_low_svs_d1>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs>, + <&rpmhpd_opp_svs>; + }; + + opp-435000000 { + opp-hz = /bits/ 64 <435000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-533333334 { + opp-hz = /bits/ 64 <533333334>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + }; + }; + videocc: clock-controller@aaf0000 { compatible = "qcom,sm8650-videocc"; reg = <0 0x0aaf0000 0 0x10000>; @@ -5732,6 +5825,7 @@ aoss_qmp: power-management@c300000 { sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c400000 { @@ -6868,8 +6962,7 @@ apps_rsc: rsc@17a00000 { compatible = "qcom,rpmh-rsc"; reg = <0 0x17a00000 0 0x10000>, <0 0x17a10000 0 0x10000>, - <0 0x17a20000 0 0x10000>, - <0 0x17a30000 0 0x10000>; + <0 0x17a20000 0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts index 72f081a890df..75cfbb510be5 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts @@ -29,6 +29,33 @@ aliases { serial0 = &uart7; }; + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + vdd-px-supply = <&vreg_l2i_1p2>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -81,6 +108,89 @@ key-volume-up { }; }; + sound { + compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard"; + model = "SM8750-MTP"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", /* MIC4 on schematics */ + "VA DMIC1", "MIC BIAS3", /* MIC1 on schematics */ + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS3", + "VA DMIC1", "VA MIC BIAS3", + "VA DMIC2", "VA MIC BIAS1", + "VA DMIC3", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -702,6 +812,14 @@ vreg_l7n_3p3: ldo7 { }; }; +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + &pm8550_flash { status = "okay"; @@ -806,6 +924,74 @@ &remoteproc_mpss { status = "fail"; }; +&swr0 { + status = "okay"; + + /* WSA883x, left/front speaker */ + left_spkr: speaker@0,1 { + compatible = "sdw10217020200"; + reg = <0 1>; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #thermal-sensor-cells = <0>; + vdd-supply = <&vreg_l15b_1p8>; + }; + + /* WSA883x, right/back speaker */ + right_spkr: speaker@0,2 { + compatible = "sdw10217020200"; + reg = <0 2>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + #thermal-sensor-cells = <0>; + vdd-supply = <&vreg_l15b_1p8>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { /* reserved for secure world */ gpio-reserved-ranges = <36 4>, <74 1>; @@ -814,3 +1000,50 @@ &tlmm { &uart7 { status = "okay"; }; + +/* Pinctrl */ +&lpass_tlmm { + spkr_0_sd_n_active: spkr-0-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&tlmm { + wcd_default: wcd-reset-n-active-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1j_0p91>; + vdda-pll-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1d_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts index 840a6d8f8a24..13c7b9664c89 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts @@ -28,6 +28,37 @@ aliases { serial0 = &uart7; }; + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + /* + * Mismatch with schematics - downstream DTS has L15B at 1.8 V, + * schematics L2I at 1.2 V + */ + vdd-px-supply = <&vreg_l15b_1p8>; + + #sound-dai-cells = <1>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -80,6 +111,88 @@ key-volume-up { }; }; + sound { + compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard"; + model = "SM8750-QRD"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT2", "ADC3_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -803,11 +916,141 @@ &remoteproc_mpss { status = "okay"; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker North */ + north_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l2i_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Speaker South */ + south_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l2i_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { /* reserved for secure world */ gpio-reserved-ranges = <36 4>, <74 1>; + + spkr_0_sd_n_active: spkr-0-sd-n-active-state { + pins = "gpio76"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart7 { status = "okay"; }; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1j_0p91>; + vdda-pll-supply = <&vreg_l3g_1p2>; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1d_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi index 980ba1ca23c4..4643705021c6 100644 --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -177,7 +178,6 @@ cluster1_c4: cpu-sleep-1 { exit-latency-us = <130>; min-residency-us = <686>; }; - }; domain-idle-states { @@ -1986,7 +1986,6 @@ &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, interconnect-names = "qup-core", "qup-config"; - pinctrl-0 = <&qup_uart7_default>; pinctrl-names = "default"; @@ -2027,7 +2026,6 @@ pcie_noc: interconnect@16c0000 { #interconnect-cells = <2>; clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; - }; aggre1_noc: interconnect@16e0000 { @@ -2037,7 +2035,6 @@ aggre1_noc: interconnect@16e0000 { #interconnect-cells = <2>; clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; - }; aggre2_noc: interconnect@1700000 { @@ -2257,6 +2254,36 @@ lpass_wsa2macro: codec@6aa0000 { #sound-dai-cells = <1>; }; + swr3: soundwire@6ab0000 { + compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0"; + reg = <0x0 0x06ab0000 0x0 0x10000>; + interrupts = ; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_rxmacro: codec@6ac0000 { compatible = "qcom,sm8750-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; reg = <0x0 0x06ac0000 0x0 0x1000>; @@ -2274,6 +2301,36 @@ lpass_rxmacro: codec@6ac0000 { #sound-dai-cells = <1>; }; + swr1: soundwire@6ad0000 { + compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0"; + reg = <0x0 0x06ad0000 0x0 0x10000>; + interrupts = ; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <1>; + qcom,dout-ports = <11>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0x31 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0x0f 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0x18 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0x01 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_txmacro: codec@6ae0000 { compatible = "qcom,sm8750-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; reg = <0x0 0x06ae0000 0x0 0x1000>; @@ -2308,6 +2365,36 @@ lpass_wsamacro: codec@6b00000 { #sound-dai-cells = <1>; }; + swr0: soundwire@6b10000 { + compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0"; + reg = <0x0 0x06b10000 0x0 0x10000>; + interrupts = ; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0x00 0x00 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x01 0x01 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_ag_noc: interconnect@7e40000 { compatible = "qcom,sm8750-lpass-ag-noc"; reg = <0x0 0x07e40000 0x0 0xe080>; @@ -2329,6 +2416,38 @@ lpass_lpicx_noc: interconnect@7420000 { #interconnect-cells = <2>; }; + swr2: soundwire@7630000 { + compatible = "qcom,soundwire-v2.1.0", "qcom,soundwire-v2.0.0"; + reg = <0x0 0x07630000 0x0 0x10000>; + interrupts = , + ; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_txmacro>; + clock-names = "iface"; + label = "TX"; + + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_vamacro: codec@7660000 { compatible = "qcom,sm8750-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; reg = <0x0 0x07660000 0x0 0x2000>; @@ -2490,6 +2609,7 @@ aoss_qmp: power-management@c300000 { sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0x0 0x0c3f0000 0x0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c400000 { @@ -3184,6 +3304,108 @@ gic_its: msi-controller@16040000 { }; }; + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,sm8750-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsrcc TCSR_UFS_CLKREF_EN>; + + clock-names = "ref", + "ref_aux", + "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm8750-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + + interrupts = ; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_LN_BB_CLK3>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + + operating-points-v2 = <&ufs_opp_table>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0>; + dma-coherent; + + lanes-per-direction = <2>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-403000000 { + opp-hz = /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + apps_rsc: rsc@16500000 { compatible = "qcom,rpmh-rsc"; reg = <0x0 0x16500000 0x0 0x10000>, diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi new file mode 100644 index 000000000000..c771fd1d8029 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi @@ -0,0 +1,1496 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis + */ + +#include +#include +#include +#include +#include +#include + +#include "x1e80100-pmics.dtsi" + +/ { + model = "ASUS Zenbook A14"; + chassis-type = "laptop"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + label = "lid"; + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + wakeup-source; + wakeup-event-action = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&cam_indicator_en>; + pinctrl-names = "default"; + + led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + /* Left-side display-adjacent port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + /* Left-side user-adjacent port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-ASUS-Zenbook-A14"; + audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", + "SpkrRight IN", "WSA WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC0", "VA MIC BIAS1", + "VA DMIC1", "VA MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, + <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, + <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, + <&swr0 0>, <&lpass_wsamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&misc_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + regulator-always-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vreg_vph_pwr>; + vdd-bob2-supply = <&vreg_vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vreg_vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vreg_vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vreg_vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vreg_vph_pwr>; + vdd-s2-supply = <&vreg_vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vreg_vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l1j_0p9: ldo1 { + regulator-name = "vreg_l1j_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = ; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + /* ELAN, 04F3:3315 */ + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + /* Left-side display-adjacent port */ + typec-mux@8 { + compatible = "parade,ps8833", "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + status = "okay"; + + /* ASUSTeK, 0B05:4543 */ + hdtl@17 { + compatible = "hid-over-i2c"; + reg = <0x17>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hdtl_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; + + /* EC @0x5b */ +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + /* Left-side user-adjacent port */ + typec-mux@8 { + compatible = "parade,ps8833", "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + /* ASUSTeK, 0B05:0220 */ + keyboard@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_3p3>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_8_gpios { + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + drive-push-pull; + qcom,drive-strength = ; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; + input-disable; + output-enable; + }; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; + bias-disable; + input-disable; + output-enable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&spi10 { + status = "disabled"; + + /* Unknown device */ +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Speaker */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Speaker */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <44 4>, /* SPI11, TZ Protected */ + <90 1>; /* Unknown, TZ Protected */ + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + hdtl_default: hdtl-default-state { + pins = "gpio95"; + function = "gpio"; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-pull-up; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + wcn_bt_en: wcn-bt-en-state { + pins = "gpio116"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_en: wcn-wlan-en-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p9>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts new file mode 100644 index 000000000000..0d0bcc50207d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis + */ + +/dts-v1/; + +#include "x1e80100.dtsi" +#include "x1-asus-zenbook-a14.dtsi" + +/ { + model = "ASUS Zenbook A14 (UX3407RA)"; + compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", + "qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", + "qcom/x1e80100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 967f6dba0878..fd00d1bf12e1 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -22,6 +22,7 @@ / { aliases { serial0 = &uart21; + serial1 = &uart14; }; gpio-keys { @@ -288,6 +289,101 @@ vreg_vph_pwr: regulator-vph-pwr { regulator-always-on; regulator-boot-on; }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -744,8 +840,21 @@ touchscreen@10 { &i2c9 { clock-frequency = <400000>; - status = "disabled"; - /* USB3 retimer device @0x4f */ + status = "okay"; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd3v3-supply = <&vreg_l13b_3p0>; + vdd1v8-supply = <&vreg_l4b_1p8>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; }; &i2c17 { @@ -848,6 +957,23 @@ &pcie4_phy { status = "okay"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie6a { perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; @@ -967,6 +1093,14 @@ edp_reg_en: edp-reg-en-state { bias-disable; }; + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + hall_int_n_default: hall-int-n-state { pins = "gpio92"; function = "gpio"; @@ -1102,6 +1236,37 @@ reset-n-pins { drive-strength = <2>; }; }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; }; &uart21 { @@ -1172,3 +1337,37 @@ &usb_1_ss1_dwc3_hs { &usb_1_ss1_qmpphy_out { remote-endpoint = <&retimer_ss1_ss_in>; }; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index 10b3af5e79fb..8d2a9b7f4730 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -153,6 +153,14 @@ pmic_glink_ss1_ss_in: endpoint { remote-endpoint = <&usb_1_ss1_qmpphy_out>; }; }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_sbu: endpoint { + remote-endpoint = <&usb_1_ss1_sbu_mux>; + }; + }; }; }; }; @@ -477,6 +485,25 @@ vreg_pmu_rfa_1p7: ldo9 { }; }; }; + + usb-1-ss1-sbu-mux { + compatible = "onnn,fsusb42", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb_1_ss1_sbu_default>; + pinctrl-names = "default"; + + mode-switch; + orientation-switch; + + port { + usb_1_ss1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_ss1_sbu>; + }; + }; + }; }; &apps_rsc { @@ -877,15 +904,6 @@ touchpad@15 { }; }; -&i2c1 { - clock-frequency = <400000>; - - status = "okay"; - - /* type-c PS8830 Retimer #2 0x8 */ - /* is active on Windows */ -}; - &i2c3 { clock-frequency = <400000>; @@ -943,14 +961,6 @@ retimer_ss0_con_sbu_out: endpoint { }; }; -&i2c4 { - clock-frequency = <400000>; - - status = "okay"; - - /* is active on Windows */ -}; - &i2c5 { clock-frequency = <400000>; status = "okay"; @@ -991,14 +1001,6 @@ touchscreen@10 { }; }; -&i2c9 { - clock-frequency = <400000>; - - status = "okay"; - - /* is active on Windows */ -}; - &lpass_tlmm { spkr_01_sd_n_active: spkr-01-sd-n-active-state { pins = "gpio12"; @@ -1193,17 +1195,6 @@ edp_bl_reg_en: edp-bl-reg-en-state { }; -&pmk8550_gpios { - edp_bl_pwm: edp-bl-pwm-state { - pins = "gpio5"; - function = "func3"; - }; -}; - -&pmk8550_pwm { - status = "okay"; -}; - &pmc8380_5_gpios { usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { pins = "gpio8"; @@ -1215,6 +1206,17 @@ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { }; }; +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + &qupv3_0 { status = "okay"; }; @@ -1419,6 +1421,30 @@ reset-n-pins { }; }; + usb_1_ss1_sbu_default: usb-1-ss1-sbu-state { + mode-pins { + pins = "gpio177"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-high; + }; + + oe-n-pins { + pins = "gpio179"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + sel-pins { + pins = "gpio178"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio191"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index a8eb4c5fe99f..a9a7bb676c6f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -3378,7 +3378,8 @@ pcie6a: pci@1bf8000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -3386,7 +3387,8 @@ pcie6a: pci@1bf8000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -3508,7 +3510,8 @@ pcie5: pci@1c00000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -3516,7 +3519,8 @@ pcie5: pci@1c00000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -3636,7 +3640,8 @@ pcie4: pci@1c08000 { , , , - ; + , + ; interrupt-names = "msi0", "msi1", "msi2", @@ -3644,7 +3649,8 @@ pcie4: pci@1c08000 { "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -8548,7 +8554,7 @@ timer { ; }; - thermal-zones { + thermal_zones: thermal-zones { aoss0-thermal { thermal-sensors = <&tsens0 0>; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts new file mode 100644 index 000000000000..bd75ff898601 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis + */ + +/dts-v1/; + +#include "x1p42100.dtsi" +#include "x1-asus-zenbook-a14.dtsi" + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + model = "ASUS Zenbook A14 (UX3407QA)"; + compatible = "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; + + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + vddaon-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_wcn_1p9>; + vddpcie1p3-supply = <&vreg_wcn_1p9>; + vddpcie1p9-supply = <&vreg_wcn_1p9>; + vddpmu-supply = <&vreg_wcn_0p95>; + vddpmucx-supply = <&vreg_wcn_0p95>; + vddpmumx-supply = <&vreg_wcn_0p95>; + vddrfa0p95-supply = <&vreg_wcn_0p95>; + vddrfa1p3-supply = <&vreg_wcn_1p9>; + vddrfa1p9-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + qcom,calibration-variant = "UX3407Q"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + max-speed = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1p42100.dtsi b/arch/arm64/boot/dts/qcom/x1p42100.dtsi index 27f479010bc3..9af9e707f982 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1p42100.dtsi @@ -18,6 +18,7 @@ /delete-node/ &cpu_pd10; /delete-node/ &cpu_pd11; /delete-node/ &pcie3_phy; +/delete-node/ &thermal_zones; &gcc { compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc"; @@ -79,3 +80,558 @@ pcie3_phy: phy@1bd4000 { status = "disabled"; }; }; + +/* While physically present, this controller is left unconfigured and unused */ +&tsens3 { + status = "disabled"; +}; + +/ { + thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-top-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-btm-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-top-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-btm-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-top-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-btm-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-top-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-btm-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-top-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-btm-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-top-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-btm-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-top-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-btm-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-top-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-btm-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-top-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-btm-thermal { + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-top-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-btm-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp0-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp1-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp2-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp3-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 5>; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 6>; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 7>; + + cooling-maps { + map0 { + trip = <&gpuss2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss2_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 8>; + + cooling-maps { + map0 { + trip = <&gpuss3_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss3_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index aa7f996c0546..6093d5f6e548 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single-ard-audio-da7212.dtb DTC_FLAGS_r8a779g3-sparrow-hawk += -Wno-spi_bus_bridge dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk.dtb +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtbo r8a779g3-sparrow-hawk-fan-pwm-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-pwm.dtbo dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtb @@ -105,6 +106,8 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single-ard-audio-da7212.dtb dtb-$(CONFIG_ARCH_R8A779H0) += r8a779h0-gray-hawk-single.dtb +dtb-$(CONFIG_ARCH_R8A779H0) += r8a779h2-gray-hawk-single.dtb + dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb r8a779m1-salvator-xs-panel-aa104xd12-dtbs := r8a779m1-salvator-xs.dtb salvator-panel-aa104xd12.dtbo dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs-panel-aa104xd12.dtb @@ -156,10 +159,25 @@ dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc-pmod1-type-3a.dtb dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc.dtb +dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc-cru-csi-ov5645.dtbo +r9a09g047e57-smarc-cru-csi-ov5645-dtbs := r9a09g047e57-smarc.dtb r9a09g047e57-smarc-cru-csi-ov5645.dtbo +dtb-$(CONFIG_ARCH_R9A09G047) += r9a09g047e57-smarc-cru-csi-ov5645.dtb dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk.dtb +dtb-$(CONFIG_ARCH_R9A09G056) += rzv2-evk-cn15-emmc.dtbo +r9a09g056n48-rzv2n-evk-cn15-emmc-dtbs := r9a09g056n48-rzv2n-evk.dtb rzv2-evk-cn15-emmc.dtbo +dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk-cn15-emmc.dtb +dtb-$(CONFIG_ARCH_R9A09G056) += rzv2-evk-cn15-sd.dtbo +r9a09g056n48-rzv2n-evk-cn15-sd-dtbs := r9a09g056n48-rzv2n-evk.dtb rzv2-evk-cn15-sd.dtbo +dtb-$(CONFIG_ARCH_R9A09G056) += r9a09g056n48-rzv2n-evk-cn15-sd.dtb dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk.dtb +dtb-$(CONFIG_ARCH_R9A09G057) += rzv2-evk-cn15-emmc.dtbo +r9a09g057h44-rzv2h-evk-cn15-emmc-dtbs := r9a09g057h44-rzv2h-evk.dtb rzv2-evk-cn15-emmc.dtbo +dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk-cn15-emmc.dtb +dtb-$(CONFIG_ARCH_R9A09G057) += rzv2-evk-cn15-sd.dtbo +r9a09g057h44-rzv2h-evk-cn15-sd-dtbs := r9a09g057h44-rzv2h-evk.dtb rzv2-evk-cn15-sd.dtbo +dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk-cn15-sd.dtb dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi index a10584150571..9fe9c722187d 100644 --- a/arch/arm64/boot/dts/renesas/condor-common.dtsi +++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi @@ -174,6 +174,7 @@ phy0: ethernet-phy@0 { &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -230,6 +231,7 @@ eeprom@50 { compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index 380b857fd273..71d9f277c966 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -308,6 +308,7 @@ &hsusb { &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; + bootph-all; status = "okay"; ak4613: codec@10 { @@ -449,6 +450,7 @@ eeprom@50 { compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 4f38b01ae18d..c4c86344fb90 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -327,9 +327,18 @@ phy0: ethernet-phy@0 { }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + + /* Please only enable canfd or can0 */ + /* status = "okay"; */ +}; + &canfd { pinctrl-0 = <&canfd0_pins>; pinctrl-names = "default"; + /* Please only enable canfd or can0 */ status = "okay"; channel0 { @@ -503,6 +512,7 @@ cs2000: clk-multiplier@4f { }; &i2c_dvfs { + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -526,6 +536,7 @@ eeprom@50 { compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; @@ -579,6 +590,11 @@ avb_pins: avb { function = "avb"; }; + can0_pins: can0 { + groups = "can0_data"; + function = "can0"; + }; + canfd0_pins: canfd0 { groups = "canfd0_data"; function = "canfd0"; diff --git a/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi b/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi new file mode 100644 index 000000000000..2edb5cb3407b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/gray-hawk-single.dtsi @@ -0,0 +1,866 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the Gray Hawk Single board + * + * Copyright (C) 2023 Renesas Electronics Corp. + * Copyright (C) 2024-2025 Glider bv + */ +/* + * [How to use Sound] + * + * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture + * at the same time. You need to switch the direction which is controlled + * by the GP0_01 pin via amixer. + * + * Playback (CN9500) + * > amixer set "MUX" "Playback" // for GP0_01 + * > amixer set "DAC 1" 85% + * > aplay xxx.wav + * + * Capture (CN9501) + * > amixer set "MUX" "Capture" // for GP0_01 + * > amixer set "Mic 1" 80% + * > amixer set "ADC 1" on + * > amixer set 'ADC 1' 80% + * > arecord xxx hoge.wav + */ + +#include +#include +#include +#include + +/ { + model = "Renesas Gray Hawk Single board"; + compatible = "renesas,gray-hawk-single"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &hscif0; + serial1 = &hscif2; + ethernet0 = &avb0; + ethernet1 = &avb1; + ethernet2 = &avb2; + }; + + can_transceiver0: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + max-bitrate = <5000000>; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:921600n8"; + }; + + sn65dsi86_refclk: clk-x6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x1 0x80000000>; + }; + + pcie_clk: clk-9fgv0841-pci { + compatible = "fixed-clock"; + clock-frequency = <100000000>; + #clock-cells = <0>; + }; + + mini-dp-con { + compatible = "dp-connector"; + label = "CN5"; + type = "mini"; + + port { + mini_dp_con_in: endpoint { + remote-endpoint = <&sn65dsi86_out0>; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sound_mux: sound-mux { + compatible = "simple-audio-mux"; + mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + state-labels = "Playback", "Capture"; + }; + + sound_card: sound { + compatible = "audio-graph-card2"; + label = "rcar-sound"; + aux-devs = <&sound_mux>; // for GP0_01 + + links = <&rsnd_port>; // AK4619 Audio Codec + }; +}; + +&audio_clkin { + clock-frequency = <24576000>; +}; + +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&avb0_phy>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + avb0_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&avb1 { + pinctrl-0 = <&avb1_pins>; + pinctrl-names = "default"; + phy-handle = <&avb1_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + avb1_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&avb2 { + pinctrl-0 = <&avb2_pins>; + pinctrl-names = "default"; + phy-handle = <&avb2_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + avb2_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&can_clk { + clock-frequency = <40000000>; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + phys = <&can_transceiver0>; + }; + + channel1 { + status = "okay"; + }; +}; + +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + bus-type = ; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96724_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi41_in: endpoint { + bus-type = ; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&max96724_out1>; + }; + }; + }; +}; + +&dsi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi0_out: endpoint { + remote-endpoint = <&sn65dsi86_in0>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&du { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gpio1 { + audio-power-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "Audio-Power"; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + bootph-all; + + uart-has-rtscts; + status = "okay"; +}; + +&hscif2 { + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander_a: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + io_expander_b: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander_c: gpio@22 { + compatible = "onnn,pca9654"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "cpu-board"; + reg = <0x50>; + pagesize = <8>; + }; + + eeprom@51 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "breakout-board"; + reg = <0x51>; + pagesize = <8>; + }; + + eeprom@52 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "csi-dsi-sub-board-id"; + reg = <0x52>; + pagesize = <8>; + }; + + eeprom@53 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "ethernet-sub-board-id"; + reg = <0x53>; + pagesize = <8>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + bridge@2c { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + + vccio-supply = <®_1p8v>; + vpll-supply = <®_1p8v>; + vcca-supply = <®_1p2v>; + vcc-supply = <®_1p2v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out0: endpoint { + remote-endpoint = <&mini_dp_con_in>; + }; + }; + }; + }; + + gmsl0: gmsl-deserializer@4e { + compatible = "maxim,max96724"; + reg = <0x4e>; + enable-gpios = <&io_expander_b 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96724_out0: endpoint { + bus-type = ; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + + gmsl1: gmsl-deserializer@4f { + compatible = "maxim,max96724"; + reg = <0x4f>; + enable-gpios = <&io_expander_c 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96724_out1: endpoint { + bus-type = ; + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + codec@10 { + compatible = "asahi-kasei,ak4619"; + reg = <0x10>; + + clocks = <&rcar_sound>; + clock-names = "mclk"; + + #sound-dai-cells = <0>; + port { + ak4619_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; +}; + +&isp0 { + status = "okay"; +}; + +&isp1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-1 = <&mmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&pcie0_clkref { + compatible = "gpio-gate-clock"; + clocks = <&pcie_clk>; + enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + /delete-property/ clock-frequency; +}; + +&pciec0 { + reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>; + pinctrl-names = "default"; + + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + }; + + avb1_pins: avb1 { + mux { + groups = "avb1_link", "avb1_mdio", "avb1_rgmii", + "avb1_txcrefclk"; + function = "avb1"; + }; + + link { + groups = "avb1_link"; + bias-disable; + }; + + mdio { + groups = "avb1_mdio"; + drive-strength = <24>; + bias-disable; + }; + + rgmii { + groups = "avb1_rgmii"; + drive-strength = <24>; + bias-disable; + }; + }; + + avb2_pins: avb2 { + mux { + groups = "avb2_link", "avb2_mdio", "avb2_rgmii", + "avb2_txcrefclk"; + function = "avb2"; + }; + + link { + groups = "avb2_link"; + bias-disable; + }; + + mdio { + groups = "avb2_mdio"; + drive-strength = <24>; + bias-disable; + }; + + rgmii { + groups = "avb2_rgmii"; + drive-strength = <24>; + bias-disable; + }; + }; + + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + hscif2_pins: hscif2 { + groups = "hscif2_data", "hscif2_ctrl"; + function = "hscif2"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + + irq0_pins: irq0_pins { + groups = "intc_ex_irq0_a"; + function = "intc_ex"; + }; + + keys_pins: keys { + pins = "GP_5_0", "GP_5_1", "GP_5_2"; + bias-pull-up; + }; + + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; + function = "mmc"; + power-source = <1800>; + }; + + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + + scif_clk_pins: scif-clk { + groups = "scif_clk"; + function = "scif_clk"; + }; + + scif_clk2_pins: scif-clk2 { + groups = "scif_clk2"; + function = "scif_clk2"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clkin", "audio_clkout"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi_ctrl", "ssi_data"; + function = "ssi"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* audio_clkout */ + clock-frequency = <12288000>; + + ports { + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&ak4619_endpoint>; + bitclock-master; + frame-master; + + /* see above [How to use Sound] */ + playback = <&ssi0>; + capture = <&ssi0>; + }; + }; + }; +}; + +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x0 0x1200000>; + read-only; + }; + user@1200000 { + reg = <0x1200000 0x2e00000>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <24000000>; +}; + +&scif_clk2 { + clock-frequency = <24000000>; +}; + +&vin00 { + status = "okay"; +}; + +&vin01 { + status = "okay"; +}; + +&vin02 { + status = "okay"; +}; + +&vin03 { + status = "okay"; +}; + +&vin04 { + status = "okay"; +}; + +&vin05 { + status = "okay"; +}; + +&vin06 { + status = "okay"; +}; + +&vin07 { + status = "okay"; +}; + +&vin08 { + status = "okay"; +}; + +&vin09 { + status = "okay"; +}; + +&vin10 { + status = "okay"; +}; + +&vin11 { + status = "okay"; +}; + +&vin12 { + status = "okay"; +}; + +&vin13 { + status = "okay"; +}; + +&vin14 { + status = "okay"; +}; + +&vin15 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 6dbf05a55935..8d9ca30c299c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -798,6 +798,16 @@ pciec0: pcie@e65d0000 { <0 0 0 4 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; snps,enable-cdm-check; status = "disabled"; + + /* PCIe bridge, Root Port */ + pciec0_rp: pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + ranges; + }; }; pciec1: pcie@e65d8000 { @@ -835,6 +845,16 @@ pciec1: pcie@e65d8000 { <0 0 0 4 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; snps,enable-cdm-check; status = "disabled"; + + /* PCIe bridge, Root Port */ + pciec1_rp: pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + ranges; + }; }; pciec0_ep: pcie-ep@e65d0000 { diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts index 6955eafd8d6a..9ba23129e65e 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts @@ -130,6 +130,13 @@ mini_dp_con_in: endpoint { }; }; + /* Page 26 / PCIe.0/1 CLK */ + pcie_refclk: clk-x8 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + reg_1p2v: regulator-1p2v { compatible = "regulator-fixed"; regulator-name = "fixed-1.2V"; @@ -404,6 +411,14 @@ i2c0_mux2: i2c@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; + + /* Page 26 / PCIe.0/1 CLK */ + pcie_clk: clk@68 { + compatible = "renesas,9fgv0441"; + reg = <0x68>; + clocks = <&pcie_refclk>; + #clock-cells = <1>; + }; }; i2c0_mux3: i2c@3 { @@ -487,26 +502,38 @@ msiof1_snd_endpoint: endpoint { /* Page 26 / 2230 Key M M.2 */ &pcie0_clkref { - clock-frequency = <100000000>; + status = "disabled"; }; &pciec0 { + clocks = <&cpg CPG_MOD 624>, <&pcie_clk 0>; reset-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; +&pciec0_rp { + clocks = <&pcie_clk 1>; + vpcie3v3-supply = <®_3p3v>; +}; + /* Page 25 / PCIe to USB */ &pcie1_clkref { - clock-frequency = <100000000>; + status = "disabled"; }; &pciec1 { + clocks = <&cpg CPG_MOD 625>, <&pcie_clk 2>; /* uPD720201 is PCIe Gen2 x1 device */ num-lanes = <1>; reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; status = "okay"; }; +&pciec1_rp { + clocks = <&pcie_clk 3>; + vpcie3v3-supply = <®_3p3v>; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; @@ -679,19 +706,6 @@ sound_clk_pins: sound-clk { }; }; -/* Page 30 / Audio_Codec */ -&rcar_sound { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - /* It is used for ADG output as DA7212_MCLK */ - - /* audio_clkout */ - clock-frequency = <12288000>; /* 48 kHz groups */ - - status = "okay"; -}; - /* Page 31 / FAN */ &pwm0 { pinctrl-0 = <&pwm0_pins>; @@ -720,6 +734,19 @@ &pwm7 { status = "okay"; }; +/* Page 30 / Audio_Codec */ +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + /* It is used for ADG output as DA7212_MCLK */ + + /* audio_clkout */ + clock-frequency = <12288000>; /* 48 kHz groups */ + + status = "okay"; +}; + /* Page 16 / QSPI_FLASH */ &rpc { pinctrl-0 = <&qspi0_pins>; diff --git a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts index 4d890e0617af..1be7836c41f4 100644 --- a/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts +++ b/arch/arm64/boot/dts/renesas/r8a779h0-gray-hawk-single.dts @@ -5,866 +5,13 @@ * Copyright (C) 2023 Renesas Electronics Corp. * Copyright (C) 2024 Glider bv */ -/* - * [How to use Sound] - * - * Because R-Car V4M has only 1 SSI, it cannot handle both Playback/Capture - * at the same time. You need to switch the direction which is controlled - * by the GP0_01 pin via amixer. - * - * Playback (CN9500) - * > amixer set "MUX" "Playback" // for GP0_01 - * > amixer set "DAC 1" 85% - * > aplay xxx.wav - * - * Capture (CN9501) - * > amixer set "MUX" "Capture" // for GP0_01 - * > amixer set "Mic 1" 80% - * > amixer set "ADC 1" on - * > amixer set 'ADC 1' 80% - * > arecord xxx hoge.wav - */ /dts-v1/; -#include -#include -#include -#include - #include "r8a779h0.dtsi" +#include "gray-hawk-single.dtsi" / { model = "Renesas Gray Hawk Single board based on r8a779h0"; compatible = "renesas,gray-hawk-single", "renesas,r8a779h0"; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - serial0 = &hscif0; - serial1 = &hscif2; - ethernet0 = &avb0; - ethernet1 = &avb1; - ethernet2 = &avb2; - }; - - can_transceiver0: can-phy0 { - compatible = "nxp,tjr1443"; - #phy-cells = <0>; - enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - max-bitrate = <5000000>; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:921600n8"; - }; - - sn65dsi86_refclk: clk-x6 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW47"; - wakeup-source; - debounce-interval = <20>; - }; - - key-2 { - gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW48"; - wakeup-source; - debounce-interval = <20>; - }; - - key-3 { - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW49"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-1 { - gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - }; - - led-2 { - gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - }; - - led-3 { - gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <3>; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; - - memory@480000000 { - device_type = "memory"; - reg = <0x4 0x80000000 0x1 0x80000000>; - }; - - pcie_clk: clk-9fgv0841-pci { - compatible = "fixed-clock"; - clock-frequency = <100000000>; - #clock-cells = <0>; - }; - - mini-dp-con { - compatible = "dp-connector"; - label = "CN5"; - type = "mini"; - - port { - mini_dp_con_in: endpoint { - remote-endpoint = <&sn65dsi86_out0>; - }; - }; - }; - - reg_1p2v: regulator-1p2v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sound_mux: sound-mux { - compatible = "simple-audio-mux"; - mux-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - state-labels = "Playback", "Capture"; - }; - - sound_card: sound { - compatible = "audio-graph-card2"; - label = "rcar-sound"; - aux-devs = <&sound_mux>; // for GP0_01 - - links = <&rsnd_port>; // AK4619 Audio Codec - }; -}; - -&audio_clkin { - clock-frequency = <24576000>; -}; - -&avb0 { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; - phy-handle = <&avb0_phy>; - tx-internal-delay-ps = <2000>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - avb0_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id0022.1622", - "ethernet-phy-ieee802.3-c22"; - rxc-skew-ps = <1500>; - reg = <0>; - interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&avb1 { - pinctrl-0 = <&avb1_pins>; - pinctrl-names = "default"; - phy-handle = <&avb1_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; - reset-post-delay-us = <4000>; - - avb1_phy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - interrupts-extended = <&gpio6 3 IRQ_TYPE_LEVEL_LOW>; - }; - }; -}; - -&avb2 { - pinctrl-0 = <&avb2_pins>; - pinctrl-names = "default"; - phy-handle = <&avb2_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; - reset-post-delay-us = <4000>; - - avb2_phy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - interrupts-extended = <&gpio5 4 IRQ_TYPE_LEVEL_LOW>; - }; - }; -}; - -&can_clk { - clock-frequency = <40000000>; -}; - -&canfd { - pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - phys = <&can_transceiver0>; - }; - - channel1 { - status = "okay"; - }; -}; - -&csi40 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - csi40_in: endpoint { - bus-type = ; - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&max96724_out0>; - }; - }; - }; -}; - -&csi41 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - csi41_in: endpoint { - bus-type = ; - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&max96724_out1>; - }; - }; - }; -}; - -&dsi0 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - - dsi0_out: endpoint { - remote-endpoint = <&sn65dsi86_in0>; - data-lanes = <1 2 3 4>; - }; - }; - }; -}; - -&du { - status = "okay"; -}; - -&extal_clk { - clock-frequency = <16666666>; -}; - -&extalr_clk { - clock-frequency = <32768>; -}; - -&gpio1 { - audio-power-hog { - gpio-hog; - gpios = <8 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "Audio-Power"; - }; -}; - -&hscif0 { - pinctrl-0 = <&hscif0_pins>; - pinctrl-names = "default"; - bootph-all; - - uart-has-rtscts; - status = "okay"; -}; - -&hscif2 { - pinctrl-0 = <&hscif2_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - io_expander_a: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - io_expander_b: gpio@21 { - compatible = "onnn,pca9654"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - }; - - io_expander_c: gpio@22 { - compatible = "onnn,pca9654"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - }; - - eeprom@50 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "cpu-board"; - reg = <0x50>; - pagesize = <8>; - }; - - eeprom@51 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "breakout-board"; - reg = <0x51>; - pagesize = <8>; - }; - - eeprom@52 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "csi-dsi-sub-board-id"; - reg = <0x52>; - pagesize = <8>; - }; - - eeprom@53 { - compatible = "rohm,br24g01", "atmel,24c01"; - label = "ethernet-sub-board-id"; - reg = <0x53>; - pagesize = <8>; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - bridge@2c { - pinctrl-0 = <&irq0_pins>; - pinctrl-names = "default"; - - compatible = "ti,sn65dsi86"; - reg = <0x2c>; - - clocks = <&sn65dsi86_refclk>; - clock-names = "refclk"; - - interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - - vccio-supply = <®_1p8v>; - vpll-supply = <®_1p8v>; - vcca-supply = <®_1p2v>; - vcc-supply = <®_1p2v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sn65dsi86_in0: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - - sn65dsi86_out0: endpoint { - remote-endpoint = <&mini_dp_con_in>; - }; - }; - }; - }; - - gmsl0: gmsl-deserializer@4e { - compatible = "maxim,max96724"; - reg = <0x4e>; - enable-gpios = <&io_expander_b 0 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@4 { - reg = <4>; - max96724_out0: endpoint { - bus-type = ; - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; - }; - }; - }; - }; - - gmsl1: gmsl-deserializer@4f { - compatible = "maxim,max96724"; - reg = <0x4f>; - enable-gpios = <&io_expander_c 0 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@4 { - reg = <4>; - max96724_out1: endpoint { - bus-type = ; - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi41_in>; - }; - }; - }; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - codec@10 { - compatible = "asahi-kasei,ak4619"; - reg = <0x10>; - - clocks = <&rcar_sound>; - clock-names = "mclk"; - - #sound-dai-cells = <0>; - port { - ak4619_endpoint: endpoint { - remote-endpoint = <&rsnd_endpoint>; - }; - }; - }; -}; - -&isp0 { - status = "okay"; -}; - -&isp1 { - status = "okay"; -}; - -&mmc0 { - pinctrl-0 = <&mmc_pins>; - pinctrl-1 = <&mmc_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - bus-width = <8>; - no-sd; - no-sdio; - non-removable; - full-pwr-cycle-in-suspend; - status = "okay"; -}; - -&pcie0_clkref { - compatible = "gpio-gate-clock"; - clocks = <&pcie_clk>; - enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; - /delete-property/ clock-frequency; -}; - -&pciec0 { - reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>, <&scif_clk2_pins>; - pinctrl-names = "default"; - - avb0_pins: avb0 { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_rgmii", - "avb0_txcrefclk"; - function = "avb0"; - }; - - pins_mdio { - groups = "avb0_mdio"; - drive-strength = <21>; - }; - - pins_mii { - groups = "avb0_rgmii"; - drive-strength = <21>; - }; - }; - - avb1_pins: avb1 { - mux { - groups = "avb1_link", "avb1_mdio", "avb1_rgmii", - "avb1_txcrefclk"; - function = "avb1"; - }; - - link { - groups = "avb1_link"; - bias-disable; - }; - - mdio { - groups = "avb1_mdio"; - drive-strength = <24>; - bias-disable; - }; - - rgmii { - groups = "avb1_rgmii"; - drive-strength = <24>; - bias-disable; - }; - }; - - avb2_pins: avb2 { - mux { - groups = "avb2_link", "avb2_mdio", "avb2_rgmii", - "avb2_txcrefclk"; - function = "avb2"; - }; - - link { - groups = "avb2_link"; - bias-disable; - }; - - mdio { - groups = "avb2_mdio"; - drive-strength = <24>; - bias-disable; - }; - - rgmii { - groups = "avb2_rgmii"; - drive-strength = <24>; - bias-disable; - }; - }; - - can_clk_pins: can-clk { - groups = "can_clk"; - function = "can_clk"; - }; - - canfd0_pins: canfd0 { - groups = "canfd0_data"; - function = "canfd0"; - }; - - canfd1_pins: canfd1 { - groups = "canfd1_data"; - function = "canfd1"; - }; - - hscif0_pins: hscif0 { - groups = "hscif0_data", "hscif0_ctrl"; - function = "hscif0"; - }; - - hscif2_pins: hscif2 { - groups = "hscif2_data", "hscif2_ctrl"; - function = "hscif2"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - i2c3_pins: i2c3 { - groups = "i2c3"; - function = "i2c3"; - }; - - irq0_pins: irq0_pins { - groups = "intc_ex_irq0_a"; - function = "intc_ex"; - }; - - keys_pins: keys { - pins = "GP_5_0", "GP_5_1", "GP_5_2"; - bias-pull-up; - }; - - mmc_pins: mmc { - groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; - function = "mmc"; - power-source = <1800>; - }; - - qspi0_pins: qspi0 { - groups = "qspi0_ctrl", "qspi0_data4"; - function = "qspi0"; - }; - - scif_clk_pins: scif-clk { - groups = "scif_clk"; - function = "scif_clk"; - }; - - scif_clk2_pins: scif-clk2 { - groups = "scif_clk2"; - function = "scif_clk2"; - }; - - sound_clk_pins: sound_clk { - groups = "audio_clkin", "audio_clkout"; - function = "audio_clk"; - }; - - sound_pins: sound { - groups = "ssi_ctrl", "ssi_data"; - function = "ssi"; - }; -}; - -&rcar_sound { - pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; - pinctrl-names = "default"; - - status = "okay"; - - /* audio_clkout */ - clock-frequency = <12288000>; - - ports { - rsnd_port: port { - rsnd_endpoint: endpoint { - remote-endpoint = <&ak4619_endpoint>; - bitclock-master; - frame-master; - - /* see above [How to use Sound] */ - playback = <&ssi0>; - capture = <&ssi0>; - }; - }; - }; -}; - -&rpc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash@0 { - compatible = "spansion,s25fs512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - reg = <0x0 0x1200000>; - read-only; - }; - user@1200000 { - reg = <0x1200000 0x2e00000>; - }; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif_clk { - clock-frequency = <24000000>; -}; - -&scif_clk2 { - clock-frequency = <24000000>; -}; - -&vin00 { - status = "okay"; -}; - -&vin01 { - status = "okay"; -}; - -&vin02 { - status = "okay"; -}; - -&vin03 { - status = "okay"; -}; - -&vin04 { - status = "okay"; -}; - -&vin05 { - status = "okay"; -}; - -&vin06 { - status = "okay"; -}; - -&vin07 { - status = "okay"; -}; - -&vin08 { - status = "okay"; -}; - -&vin09 { - status = "okay"; -}; - -&vin10 { - status = "okay"; -}; - -&vin11 { - status = "okay"; -}; - -&vin12 { - status = "okay"; -}; - -&vin13 { - status = "okay"; -}; - -&vin14 { - status = "okay"; -}; - -&vin15 { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts b/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts new file mode 100644 index 000000000000..aeb32c77099e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779h2-gray-hawk-single.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4M-7 Gray Hawk Single board + * + * Copyright (C) 2025 Glider bv + */ + +/dts-v1/; + +#include "r8a779h2.dtsi" +#include "gray-hawk-single.dtsi" + +/ { + model = "Renesas Gray Hawk Single board based on r8a779h2"; + compatible = "renesas,gray-hawk-single", "renesas,r8a779h2", + "renesas,r8a779h0"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779h2.dtsi b/arch/arm64/boot/dts/renesas/r8a779h2.dtsi new file mode 100644 index 000000000000..2707d2d36766 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779h2.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4M-7 (R8A779H2) SoC + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +#include "r8a779h0.dtsi" + +/ { + compatible = "renesas,r8a779h2", "renesas,r8a779h0"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi index 876f70fed433..e4fac7e0d764 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi @@ -280,6 +280,27 @@ sys: system-controller@10430000 { resets = <&cpg 0x30>; }; + xspi: spi@11030000 { + compatible = "renesas,r9a09g047-xspi"; + reg = <0 0x11030000 0 0x10000>, + <0 0x20000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = , + ; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 0x9f>, + <&cpg CPG_MOD 0xa0>, + <&cpg CPG_CORE R9A09G047_SPI_CLK_SPI>, + <&cpg CPG_MOD 0xa1>; + clock-names = "ahb", "axi", "spi", "spix2"; + resets = <&cpg 0xa3>, <&cpg 0xa4>; + reset-names = "hresetn", "aresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif0: serial@11c01400 { compatible = "renesas,scif-r9a09g047", "renesas,scif-r9a09g057"; reg = <0 0x11c01400 0 0x400>; @@ -669,6 +690,284 @@ sdhi2_vqmmc: vqmmc-regulator { status = "disabled"; }; }; + + eth0: ethernet@15c30000 { + compatible = "renesas,r9a09g047-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c30000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>, + <&cpg CPG_CORE R9A09G047_GBETH_0_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>, + <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + interrupts = , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + resets = <&cpg 0xb0>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + eth1: ethernet@15c40000 { + compatible = "renesas,r9a09g047-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c40000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>, + <&cpg CPG_CORE R9A09G047_GBETH_1_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>, + <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + interrupts = , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + resets = <&cpg 0xb1>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + cru: video@16000000 { + compatible = "renesas,r9a09g047-cru"; + reg = <0 0x16000000 0 0x400>; + clocks = <&cpg CPG_MOD 0xd3>, + <&cpg CPG_MOD 0xd4>, + <&cpg CPG_MOD 0xd2>; + clock-names = "video", "apb", "axi"; + interrupts = , + , + , + , + ; + interrupt-names = "image_conv", "axi_mst_err", + "vd_addr_wend", "sd_addr_wend", + "vsd_addr_wend"; + resets = <&cpg 0xc5>, <&cpg 0xc6>; + reset-names = "presetn", "aresetn"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2cru>; + }; + }; + }; + }; + + csi2: csi2@16000400 { + compatible = "renesas,r9a09g047-csi2", "renesas,r9a09g057-csi2"; + reg = <0 0x16000400 0 0xc00>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xd3>, <&cpg CPG_MOD 0xd4>; + clock-names = "video", "apb"; + resets = <&cpg 0xc5>, <&cpg 0xc7>; + reset-names = "presetn", "cmn-rstb"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso new file mode 100644 index 000000000000..0f18f68f8120 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc-cru-csi-ov5645.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree overlay for the RZ/G3E SMARC EVK with OV5645 camera + * connected to CSI and CRU enabled. + * + * Copyright (C) 2025 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include +#include + +#define OV5645_PARENT_I2C i2c0 +#include "rz-smarc-cru-csi-ov5645.dtsi" + +&ov5645 { + enable-gpios = <&pinctrl RZG3E_GPIO(D, 6) GPIO_ACTIVE_HIGH>; + reset-gpios = <&pinctrl RZG3E_GPIO(D, 7) GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts index 1f5e61a73c35..1e67f0a2a945 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts @@ -8,6 +8,7 @@ /dts-v1/; /* Switch selection settings */ +#define SW_LCD_EN 0 #define SW_GPIO8_CAN0_STB 0 #define SW_GPIO9_CAN1_STB 0 #define SW_LCD_EN 0 @@ -15,7 +16,16 @@ #define SW_SD0_DEV_SEL 0 #define SW_SDIO_M2E 0 +#define PMOD_GPIO4 0 +#define PMOD_GPIO6 0 +#define PMOD_GPIO7 0 + +#define KEY_1_GPIO RZG3E_GPIO(3, 1) +#define KEY_2_GPIO RZG3E_GPIO(8, 4) +#define KEY_3_GPIO RZG3E_GPIO(8, 5) + #include +#include #include #include "r9a09g047e57.dtsi" #include "rzg3e-smarc-som.dtsi" @@ -74,6 +84,34 @@ &can_transceiver1 { }; #endif +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; +}; + +&keys { + key-sleep { + pinctrl-0 = <&nmi_pins>; + pinctrl-names = "default"; + + interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>; + linux,code = ; + label = "SLEEP"; + debounce-interval = <20>; + }; +#if PMOD_GPIO4 + /delete-node/ key-1; +#endif + +#if SW_LCD_EN || PMOD_GPIO6 + /delete-node/ key-2; +#endif + +#if SW_LCD_EN || PMOD_GPIO7 + /delete-node/ key-3; +#endif +}; + &pinctrl { canfd_pins: canfd { can1_pins: can1 { @@ -87,6 +125,15 @@ can4_pins: can4 { }; }; + i2c0_pins: i2c0 { + pinmux = , /* SCL0 */ + ; /* SDA0 */ + }; + + nmi_pins: nmi { + pinmux = ; /* NMI */ + }; + scif_pins: scif { pins = "SCIF_TXD", "SCIF_RXD"; renesas,output-impedance = <1>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi index 90964bd864cc..10d3b9727ea5 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi @@ -123,6 +123,35 @@ L3_CA55: cache-controller-0 { }; }; + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-630000000 { + opp-hz = /bits/ 64 <630000000>; + opp-microvolt = <800000>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-microvolt = <800000>; + }; + + opp-157500000 { + opp-hz = /bits/ 64 <157500000>; + opp-microvolt = <800000>; + }; + + opp-78750000 { + opp-hz = /bits/ 64 <78750000>; + opp-microvolt = <800000>; + }; + + opp-19687500 { + opp-hz = /bits/ 64 <19687500>; + opp-microvolt = <800000>; + }; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -177,6 +206,147 @@ sys: system-controller@10430000 { resets = <&cpg 0x30>; }; + xspi: spi@11030000 { + compatible = "renesas,r9a09g056-xspi", "renesas,r9a09g047-xspi"; + reg = <0 0x11030000 0 0x10000>, + <0 0x20000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = , + ; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 0x9f>, + <&cpg CPG_MOD 0xa0>, + <&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>, + <&cpg CPG_MOD 0xa1>; + clock-names = "ahb", "axi", "spi", "spix2"; + resets = <&cpg 0xa3>, <&cpg 0xa4>; + reset-names = "hresetn", "aresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ostm0: timer@11800000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x11800000 0x0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x43>; + resets = <&cpg 0x6d>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@11801000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x11801000 0x0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x44>; + resets = <&cpg 0x6e>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@14000000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x14000000 0x0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x45>; + resets = <&cpg 0x6f>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm3: timer@14001000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x14001000 0x0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x46>; + resets = <&cpg 0x70>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm4: timer@12c00000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x12c00000 0x0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x47>; + resets = <&cpg 0x71>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm5: timer@12c01000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x12c01000 0x0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x48>; + resets = <&cpg 0x72>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm6: timer@12c02000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x12c02000 0x0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x49>; + resets = <&cpg 0x73>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm7: timer@12c03000 { + compatible = "renesas,r9a09g056-ostm", "renesas,ostm"; + reg = <0x0 0x12c03000 0x0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 0x4a>; + resets = <&cpg 0x74>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt0: watchdog@11c00400 { + compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt"; + reg = <0 0x11c00400 0 0x400>; + clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x75>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt1: watchdog@14400000 { + compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt"; + reg = <0 0x14400000 0 0x400>; + clocks = <&cpg CPG_MOD 0x4d>, <&cpg CPG_MOD 0x4e>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x76>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt2: watchdog@13000000 { + compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt"; + reg = <0 0x13000000 0 0x400>; + clocks = <&cpg CPG_MOD 0x4f>, <&cpg CPG_MOD 0x50>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x77>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt3: watchdog@13000400 { + compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt"; + reg = <0 0x13000400 0 0x400>; + clocks = <&cpg CPG_MOD 0x51>, <&cpg CPG_MOD 0x52>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x78>; + power-domains = <&cpg>; + status = "disabled"; + }; + scif: serial@11c01400 { compatible = "renesas,scif-r9a09g056", "renesas,scif-r9a09g057"; @@ -199,6 +369,217 @@ scif: serial@11c01400 { status = "disabled"; }; + i2c0: i2c@14400400 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14400400 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x94>; + resets = <&cpg 0x98>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@14400800 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14400800 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x95>; + resets = <&cpg 0x99>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@14400c00 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14400c00 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x96>; + resets = <&cpg 0x9a>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@14401000 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14401000 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x97>; + resets = <&cpg 0x9b>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@14401400 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14401400 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x98>; + resets = <&cpg 0x9c>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@14401800 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14401800 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x99>; + resets = <&cpg 0x9d>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@14401c00 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14401c00 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x9a>; + resets = <&cpg 0x9e>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@14402000 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x14402000 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x9b>; + resets = <&cpg 0x9f>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@11c01000 { + compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057"; + reg = <0 0x11c01000 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD 0x93>; + resets = <&cpg 0xa0>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gpu: gpu@14850000 { + compatible = "renesas,r9a09g056-mali", + "arm,mali-bifrost"; + reg = <0x0 0x14850000 0x0 0x10000>; + interrupts = , + , + , + ; + interrupt-names = "job", "mmu", "gpu", "event"; + clocks = <&cpg CPG_MOD 0xf0>, + <&cpg CPG_MOD 0xf1>, + <&cpg CPG_MOD 0xf2>; + clock-names = "gpu", "bus", "bus_ace"; + resets = <&cpg 0xdd>, + <&cpg 0xde>, + <&cpg 0xdf>; + reset-names = "rst", "axi_rst", "ace_rst"; + power-domains = <&cpg>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + }; + gic: interrupt-controller@14900000 { compatible = "arm,gic-v3"; reg = <0x0 0x14900000 0 0x20000>, @@ -209,6 +590,72 @@ gic: interrupt-controller@14900000 { interrupts = ; }; + ohci0: usb@15800000 { + compatible = "generic-ohci"; + reg = <0 0x15800000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>; + resets = <&usb20phyrst>, <&cpg 0xac>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@15800100 { + compatible = "generic-ehci"; + reg = <0 0x15800100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>; + resets = <&usb20phyrst>, <&cpg 0xac>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@15800200 { + compatible = "renesas,usb2-phy-r9a09g056", "renesas,usb2-phy-r9a09g057"; + reg = <0 0x15800200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb3>, + <&cpg CPG_CORE R9A09G056_USB2_0_CLK_CORE0>; + clock-names = "fck", "usb_x1"; + resets = <&usb20phyrst>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@15820000 { + compatible = "renesas,usbhs-r9a09g056", + "renesas,rzg2l-usbhs"; + reg = <0 0x15820000 0 0x10000>; + interrupts = , + , + , + ; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>; + resets = <&usb20phyrst>, + <&cpg 0xae>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb20phyrst: usb20phy-reset@15830000 { + compatible = "renesas,r9a09g056-usb2phy-reset", + "renesas,r9a09g057-usb2phy-reset"; + reg = <0 0x15830000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xb6>; + resets = <&cpg 0xaf>; + power-domains = <&cpg>; + #reset-cells = <0>; + status = "disabled"; + }; + sdhi0: mmc@15c00000 { compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057"; reg = <0x0 0x15c00000 0 0x10000>; @@ -268,6 +715,215 @@ sdhi2_vqmmc: vqmmc-regulator { status = "disabled"; }; }; + + eth0: ethernet@15c30000 { + compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c30000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>, + <&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>, + <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb0>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + eth1: ethernet@15c40000 { + compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c40000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>, + <&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>, + <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb1>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts index 24343fce7f53..03aeea781186 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts @@ -15,6 +15,15 @@ / { compatible = "renesas,rzv2n-evk", "renesas,r9a09g056n48", "renesas,r9a09g056"; aliases { + ethernet0 = ð0; + ethernet1 = ð1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; mmc1 = &sdhi1; serial0 = &scif; }; @@ -30,6 +39,24 @@ memory@48000000 { reg = <0x0 0x48000000 0x1 0xf8000000>; }; + reg_0p8v: regulator-0p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-0.8V"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -48,13 +75,232 @@ vqmmc_sdhi1: regulator-vqmmc-sdhi1 { gpios-states = <0>; states = <3300000 0>, <1800000 1>; }; + + /* 32.768kHz crystal */ + x6: x6-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &audio_extal_clk { clock-frequency = <22579200>; }; +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gpu { + status = "okay"; + mali-supply = <®_0p8v>; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c7 { + pinctrl-0 = <&i2c7_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c8 { + pinctrl-0 = <&i2c8_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + status = "okay"; + + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + clocks = <&x6>; + clock-names = "xin"; + }; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&mdio1 { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + +&ostm3 { + status = "okay"; +}; + +&ostm4 { + status = "okay"; +}; + +&ostm5 { + status = "okay"; +}; + +&ostm6 { + status = "okay"; +}; + +&ostm7 { + status = "okay"; +}; + &pinctrl { + eth0_pins: eth0 { + pins = "ET0_TXC_TXCLK"; + output-enable; + }; + + eth1_pins: eth1 { + pins = "ET1_TXC_TXCLK"; + output-enable; + }; + + i2c0_pins: i2c0 { + pinmux = , /* I2C0_SDA */ + ; /* I2C0_SCL */ + }; + + i2c1_pins: i2c1 { + pinmux = , /* I2C1_SDA */ + ; /* I2C1_SCL */ + }; + + i2c2_pins: i2c2 { + pinmux = , /* I2C2_SDA */ + ; /* I2C2_SCL */ + }; + + i2c3_pins: i2c3 { + pinmux = , /* I2C3_SDA */ + ; /* I2C3_SCL */ + }; + + i2c6_pins: i2c6 { + pinmux = , /* I2C6_SDA */ + ; /* I2C6_SCL */ + /* There are no pull-up resistors on the EVK, so enable the internal pull-up */ + bias-pull-up; + }; + + i2c7_pins: i2c7 { + pinmux = , /* I2C7_SDA */ + ; /* I2C7_SCL */ + /* There are no pull-up resistors on the EVK, so enable the internal pull-up */ + bias-pull-up; + }; + + i2c8_pins: i2c8 { + pinmux = , /* I2C8_SDA */ + ; /* I2C8_SCL */ + }; + scif_pins: scif { pins = "SCIF_TXD", "SCIF_RXD"; renesas,output-impedance = <1>; @@ -85,6 +331,28 @@ sd1-dat-cmd { slew-rate = <0>; }; }; + + usb20_pins: usb20 { + ovc { + pinmux = ; /* OVC */ + }; + + vbus { + pinmux = ; /* VBUS */ + }; + }; + + xspi_pins: xspi0 { + ctrl { + pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP"; + output-enable; + }; + + io { + pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3"; + renesas,output-impedance = <3>; + }; + }; }; &qextal_clk { @@ -112,3 +380,61 @@ &sdhi1 { sd-uhs-sdr104; status = "okay"; }; + +&usb20phyrst { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb20_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&wdt1 { + status = "okay"; +}; + +&xspi { + pinctrl-0 = <&xspi_pins>; + pinctrl-names = "default"; + /* + * MT25QU512ABB8E12 flash chip is capable of running at 166MHz + * clock frequency. Set the clock frequency to the maximum 133MHz + * supported by the RZ/V2N SoC. + */ + assigned-clocks = <&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>; + assigned-clock-rates = <133333334>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_1p8v>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000000 0x00060000>; + }; + + partition@60000 { + label = "fip"; + reg = <0x00060000 0x1fa0000>; + }; + + partition@2000000 { + label = "user"; + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi index 0f3501951409..044f2a22f161 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi @@ -280,6 +280,27 @@ sys: system-controller@10430000 { resets = <&cpg 0x30>; }; + xspi: spi@11030000 { + compatible = "renesas,r9a09g057-xspi", "renesas,r9a09g047-xspi"; + reg = <0 0x11030000 0 0x10000>, + <0 0x20000000 0 0x10000000>; + reg-names = "regs", "dirmap"; + interrupts = , + ; + interrupt-names = "pulse", "err_pulse"; + clocks = <&cpg CPG_MOD 0x9f>, + <&cpg CPG_MOD 0xa0>, + <&cpg CPG_CORE R9A09G057_SPI_CLK_SPI>, + <&cpg CPG_MOD 0xa1>; + clock-names = "ahb", "axi", "spi", "spix2"; + resets = <&cpg 0xa3>, <&cpg 0xa4>; + reset-names = "hresetn", "aresetn"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dmac0: dma-controller@11400000 { compatible = "renesas,r9a09g057-dmac"; reg = <0 0x11400000 0 0x10000>; @@ -807,6 +828,119 @@ gic: interrupt-controller@14900000 { interrupts = ; }; + ohci0: usb@15800000 { + compatible = "generic-ohci"; + reg = <0 0x15800000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>; + resets = <&usb20phyrst>, <&cpg 0xac>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@15810000 { + compatible = "generic-ohci"; + reg = <0 0x15810000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb4>, <&cpg CPG_MOD 0xb7>; + resets = <&usb21phyrst>, <&cpg 0xad>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@15800100 { + compatible = "generic-ehci"; + reg = <0 0x15800100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>; + resets = <&usb20phyrst>, <&cpg 0xac>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@15810100 { + compatible = "generic-ehci"; + reg = <0 0x15810100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb4>, <&cpg CPG_MOD 0xb7>; + resets = <&usb21phyrst>, <&cpg 0xad>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@15800200 { + compatible = "renesas,usb2-phy-r9a09g057"; + reg = <0 0x15800200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb3>, + <&cpg CPG_CORE R9A09G057_USB2_0_CLK_CORE0>; + clock-names = "fck", "usb_x1"; + resets = <&usb20phyrst>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@15810200 { + compatible = "renesas,usb2-phy-r9a09g057"; + reg = <0 0x15810200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD 0xb4>, + <&cpg CPG_CORE R9A09G057_USB2_0_CLK_CORE1>; + clock-names = "fck", "usb_x1"; + resets = <&usb21phyrst>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@15820000 { + compatible = "renesas,usbhs-r9a09g057", + "renesas,rzg2l-usbhs"; + reg = <0 0x15820000 0 0x10000>; + interrupts = , + , + , + ; + clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>; + resets = <&usb20phyrst>, + <&cpg 0xae>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb20phyrst: usb20phy-reset@15830000 { + compatible = "renesas,r9a09g057-usb2phy-reset"; + reg = <0 0x15830000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xb6>; + resets = <&cpg 0xaf>; + power-domains = <&cpg>; + #reset-cells = <0>; + status = "disabled"; + }; + + usb21phyrst: usb21phy-reset@15840000 { + compatible = "renesas,r9a09g057-usb2phy-reset"; + reg = <0 0x15840000 0 0x10000>; + clocks = <&cpg CPG_MOD 0xb7>; + resets = <&cpg 0xaf>; + power-domains = <&cpg>; + #reset-cells = <0>; + status = "disabled"; + }; + sdhi0: mmc@15c00000 { compatible = "renesas,sdhi-r9a09g057"; reg = <0x0 0x15c00000 0 0x10000>; @@ -866,6 +1000,215 @@ sdhi2_vqmmc: vqmmc-regulator { status = "disabled"; }; }; + + eth0: ethernet@15c30000 { + compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c30000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>, + <&cpg CPG_CORE R9A09G057_GBETH_0_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>, + <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb0>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + + eth1: ethernet@15c40000 { + compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x15c40000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>, + <&cpg CPG_CORE R9A09G057_GBETH_1_CLK_PTP_REF_I>, + <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>, + <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb1>; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + }; + }; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts index 063eca0ba3e2..5c3f4e471e3d 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts @@ -16,6 +16,8 @@ / { compatible = "renesas,rzv2h-evk", "renesas,r9a09g057h44", "renesas,r9a09g057"; aliases { + ethernet0 = ð0; + ethernet1 = ð1; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -43,7 +45,7 @@ memory@240000000 { reg = <0x2 0x40000000 0x2 0x00000000>; }; - reg_0p8v: regulator0 { + reg_0p8v: regulator-0p8v { compatible = "regulator-fixed"; regulator-name = "fixed-0.8V"; @@ -53,7 +55,16 @@ reg_0p8v: regulator0 { regulator-always-on; }; - reg_3p3v: regulator1 { + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -72,17 +83,54 @@ vqmmc_sdhi1: regulator-vccq-sdhi1 { gpios-states = <0>; states = <3300000 0>, <1800000 1>; }; + + /* 32.768kHz crystal */ + x6: x6-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &audio_extal_clk { clock-frequency = <22579200>; }; +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + &gpu { status = "okay"; mali-supply = <®_0p8v>; }; +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -137,6 +185,61 @@ &i2c8 { clock-frequency = <400000>; status = "okay"; + + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + clocks = <&x6>; + clock-names = "xin"; + }; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&mdio1 { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1640", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; }; &ostm0 { @@ -172,6 +275,16 @@ &ostm7 { }; &pinctrl { + eth0_pins: eth0 { + pins = "ET0_TXC_TXCLK"; + output-enable; + }; + + eth1_pins: eth1 { + pins = "ET1_TXC_TXCLK"; + output-enable; + }; + i2c0_pins: i2c0 { pinmux = , /* I2C0_SDA */ ; /* I2C0_SCL */ @@ -237,6 +350,38 @@ sd1_cd { pinmux = ; /* SD1_CD */ }; }; + + usb20_pins: usb20 { + ovc { + pinmux = ; /* OVC */ + }; + + vbus { + pinmux = ; /* VBUS */ + }; + }; + + usb21_pins: usb21 { + ovc { + pinmux = ; /* OVC */ + }; + + vbus { + pinmux = ; /* VBUS */ + }; + }; + + xspi_pins: xspi0 { + ctrl { + pins = "XSPI0_RESET0N", "XSPI0_CS0N", "XSPI0_CKP"; + output-enable; + }; + + io { + pins = "XSPI0_IO0", "XSPI0_IO1", "XSPI0_IO2", "XSPI0_IO3"; + renesas,output-impedance = <3>; + }; + }; }; &qextal_clk { @@ -266,6 +411,71 @@ &sdhi1 { status = "okay"; }; +&usb20phyrst { + status = "okay"; +}; + +&usb21phyrst { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb20_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb21_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &wdt1 { status = "okay"; }; + +&xspi { + pinctrl-0 = <&xspi_pins>; + pinctrl-names = "default"; + /* + * MT25QU512ABB8E12 flash chip is capable of running at 166MHz + * clock frequency. Set the clock frequency to the maximum 133MHz + * supported by the RZ/V2H SoC. + */ + assigned-clocks = <&cpg CPG_CORE R9A09G057_SPI_CLK_SPI>; + assigned-clock-rates = <133333334>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_1p8v>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000000 0x00060000>; + }; + + partition@60000 { + label = "fip"; + reg = <0x00060000 0x1fa0000>; + }; + + partition@2000000 { + label = "user"; + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi index afdc1940e24a..58561da3007a 100644 --- a/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi +++ b/arch/arm64/boot/dts/renesas/renesas-smarc2.dtsi @@ -23,6 +23,9 @@ * SW_GPIO9_CAN1_STB: * 0 - Connect to GPIO9 PMOD (default) * 1 - Connect to CAN1 transceiver STB pin + * + * GPIO keys are enabled by default. Use PMOD_GPIO macros to disable them + * if needed. */ / { @@ -35,6 +38,7 @@ chosen { }; aliases { + i2c0 = &i2c0; serial3 = &scif0; mmc1 = &sdhi1; }; @@ -52,12 +56,45 @@ can_transceiver1: can-phy1 { max-bitrate = <8000000>; status = "disabled"; }; + + keys: keys { + compatible = "gpio-keys"; + + key-1 { + interrupts-extended = <&pinctrl KEY_1_GPIO IRQ_TYPE_EDGE_FALLING>; + linux,code = ; + label = "USER_SW1"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + interrupts-extended = <&pinctrl KEY_2_GPIO IRQ_TYPE_EDGE_FALLING>; + linux,code = ; + label = "USER_SW2"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + interrupts-extended = <&pinctrl KEY_3_GPIO IRQ_TYPE_EDGE_FALLING>; + linux,code = ; + label = "USER_SW3"; + wakeup-source; + debounce-interval = <20>; + }; + }; }; &canfd { status = "okay"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; +}; + &scif0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi index ecea29a76b14..7faa44510d98 100644 --- a/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3e-smarc-som.dtsi @@ -26,6 +26,8 @@ / { compatible = "renesas,rzg3e-smarcm", "renesas,r9a09g047e57", "renesas,r9a09g047"; aliases { + ethernet0 = ð0; + ethernet1 = ð1; i2c2 = &i2c2; mmc0 = &sdhi0; mmc2 = &sdhi2; @@ -77,6 +79,24 @@ &audio_extal_clk { clock-frequency = <48000000>; }; +ð0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +ð1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &gpu { status = "okay"; mali-supply = <®_vdd0p8v_others>; @@ -102,7 +122,98 @@ raa215300: pmic@12 { }; }; +&mdio0 { + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupts-extended = <&icu 3 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-psec = <1400>; + txc-skew-psec = <1400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&mdio1 { + phy1: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupts-extended = <&icu 16 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-psec = <1400>; + txc-skew-psec = <1400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + &pinctrl { + eth0_pins: eth0 { + clk { + pinmux = ; /* TXC */ + output-enable; + }; + + ctrl { + pinmux = , /* MDC */ + , /* MDIO */ + , /* PHY_INTR (IRQ2) */ + , /* RXD3 */ + , /* RXD2 */ + , /* RXD1 */ + , /* RXD0 */ + , /* RXC */ + , /* RX_CTL */ + , /* TXD3 */ + , /* TXD2 */ + , /* TXD1 */ + , /* TXD0 */ + ; /* TX_CTL */ + }; + }; + + eth1_pins: eth1 { + clk { + pinmux = ; /* TXC */ + output-enable; + }; + + ctrl { + + pinmux = , /* MDC */ + , /* MDIO */ + , /* PHY_INTR (IRQ15) */ + , /* RXD3 */ + , /* RXD2 */ + , /* RXD1 */ + , /* RXD0 */ + , /* RXC */ + , /* RX_CTL */ + , /* TXD3 */ + , /* TXD2 */ + , /* TXD1 */ + , /* TXD0 */ + ; /* TX_CTL */ + }; + }; + i2c2_pins: i2c { pinmux = , /* SCL2 */ ; /* SDA2 */ @@ -182,6 +293,15 @@ sd2-pwen { pinmux = ; /* SD2PWEN */ }; }; + + xspi_pins: xspi0 { + pinmux = , /* XSPI0_IO0 */ + , /* XSPI0_IO1 */ + , /* XSPI0_IO2 */ + , /* XSPI0_IO3 */ + , /* XSPI0_CKP */ + ; /* XSPI0_CS0 */ + }; }; &qextal_clk { @@ -245,3 +365,40 @@ &sdhi2_vqmmc { &wdt1 { status = "okay"; }; + +&xspi { + pinctrl-0 = <&xspi_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + vcc-supply = <®_1p8v>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000000 0x00060000>; + }; + + partition@60000 { + label = "fip"; + reg = <0x00060000 0x007a0000>; + }; + + partition@800000 { + label = "user"; + reg = <0x800000 0x800000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso new file mode 100644 index 000000000000..eda2b31f6d79 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-emmc.dtso @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Shared DT overlay for the eMMC Sub Board (RTK0EF0186B02000BJ), which + * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs. + * + * Copyright (C) 2025 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include +#include + +&{/} { + aliases { + mmc0 = "/soc/mmc@15c00000"; + }; +}; + +&pinctrl { + sdhi0_emmc_pins: emmc-pins { + sd0-clk { + pins = "SD0CLK"; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + + sd0-dat-cmd { + pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0DAT4", + "SD0DAT5", "SD0DAT6", "SD0DAT7", "SD0CMD"; + input-enable; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso new file mode 100644 index 000000000000..0af1e0a6c7f4 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzv2-evk-cn15-sd.dtso @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Shared DT overlay for the microSD Sub Board (RTK0EF0186B01000BJ), which + * is connected to the CN15 connector on the RZ/V2H and RZ/V2N EVKs. + * + * Copyright (C) 2025 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include +#include + +&{/} { + aliases { + mmc0 = "/soc/mmc@15c00000"; + }; + + vqmmc_sdhi0: regulator-vqmmc-sdhi0 { + compatible = "regulator-gpio"; + regulator-name = "SDHI0 VqmmC"; + gpios = <&pinctrl RZG2L_GPIO(10, 0) GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios-states = <0>; + states = <3300000 0>, <1800000 1>; + }; +}; + +&pinctrl { + sdhi0-pwr-en-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "sd0_pwr_en"; + }; + + sdhi0_pins: sd0 { + sd0-cd { + pinmux = ; /* SD0_CD */ + }; + + sd0-clk { + pins = "SD0CLK"; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + + sd0-dat-cmd { + pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0CMD"; + input-enable; + renesas,output-impedance = <3>; + slew-rate = <0>; + }; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vqmmc_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 68971c870d17..bbb3583372d0 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -592,6 +592,7 @@ csa_dvfs: adc@7f { }; &i2c_dvfs { + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -625,6 +626,7 @@ eeprom@50 { compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index fcab957b54f7..8a30908992ab 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -244,6 +244,7 @@ versaclock5: clock-generator@6a { }; &i2c_dvfs { + bootph-all; status = "okay"; clock-frequency = <400000>; @@ -277,6 +278,7 @@ eeprom@50 { compatible = "rohm,br24t01", "atmel,24c01"; reg = <0x50>; pagesize = <8>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 4bf84622db47..099520962ffb 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-s0.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-sakurapi-rk3308b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb @@ -84,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb @@ -143,7 +145,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb @@ -160,6 +165,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-firefly-itx-3588j.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-ethernet-switch.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-mnt-reform2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb @@ -174,6 +180,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5t.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb @@ -188,6 +195,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5c.dtb @@ -220,11 +228,23 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou-haikou-video-demo.dtb rk3399-puma-haikou-haikou-video-demo-dtbs := rk3399-puma-haikou.dtb \ rk3399-puma-haikou-video-demo.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtb +rk3399-rockpro64-screen-dtbs := rk3399-rockpro64.dtb \ + rk3399-rockpro64-screen.dtbo + +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2-screen.dtb +rk3399-rockpro64-v2-screen-dtbs := rk3399-rockpro64-v2.dtb \ + rk3399-rockpro64-screen.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-vz-2-uhd.dtb rk3568-wolfvision-pf5-vz-2-uhd-dtbs := rk3568-wolfvision-pf5.dtb \ rk3568-wolfvision-pf5-display-vz.dtbo \ rk3568-wolfvision-pf5-io-expander.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtb +rk3576-armsom-sige5-v1.2-wifibt-dtbs := rk3576-armsom-sige5.dtb \ + rk3576-armsom-sige5-v1.2-wifibt.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtb rk3588-edgeble-neu6a-wifi-dtbs := rk3588-edgeble-neu6a-io.dtb \ rk3588-edgeble-neu6a-wifi.dtbo @@ -233,6 +253,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-wifi.dtb rk3588-edgeble-neu6b-wifi-dtbs := rk3588-edgeble-neu6b-io.dtb \ rk3588-edgeble-neu6a-wifi.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-ethernet-switch.dtb +rk3588-jaguar-ethernet-switch-dtbs := rk3588-jaguar.dtb \ + rk3588-jaguar-ethernet-switch.dtbo + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar-pre-ict-tester.dtb rk3588-jaguar-pre-ict-tester-dtbs := rk3588-jaguar.dtb \ rk3588-jaguar-pre-ict-tester.dtbo diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts index 1d26164be7b8..a31c61c8f148 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts +++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts @@ -12,6 +12,8 @@ / { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts index 82c6acdb4fae..a3c6edfdb37c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts +++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts @@ -12,6 +12,8 @@ / { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts index 94449132df38..9b5eff392dfa 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts +++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts @@ -12,6 +12,8 @@ / { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts index d7b639e7ccab..36b7cae49e31 100644 --- a/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts +++ b/arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts @@ -16,6 +16,8 @@ aliases { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index d93aaac7a42f..85d1642eb9be 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -124,6 +124,8 @@ &display_subsystem { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; ports { @@ -483,8 +485,7 @@ &isp { ports { port@0 { - mipi_in_ucam: endpoint@0 { - reg = <0>; + mipi_in_ucam: endpoint { data-lanes = <1 2>; remote-endpoint = <&ucam_out>; }; diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts index b71929bcb33e..932721ffd470 100644 --- a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts +++ b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dts @@ -12,6 +12,8 @@ / { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts index a9bd5936c701..70adf091371c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts +++ b/arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3148w.dts @@ -12,6 +12,8 @@ / { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi b/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi index 3f9a133d7373..b4bd4e34747c 100644 --- a/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi @@ -444,8 +444,7 @@ &isp { ports { port@0 { - mipi_in_ucam: endpoint@0 { - reg = <0>; + mipi_in_ucam: endpoint { data-lanes = <1 2>; remote-endpoint = <&ucam_out>; }; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso index 7d9ea5aa5984..ea5ce919984f 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso @@ -94,6 +94,15 @@ video-adapter-led { }; }; +&cif_clkout_m0 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none_12ma>; +}; + +&csi_dphy { + status = "okay"; +}; + &display_subsystem { status = "okay"; }; @@ -135,6 +144,12 @@ &i2c1 { /* OV5675, GT911, DW9714 are limited to 400KHz */ clock-frequency = <400000>; + focus: focus@c { + compatible = "dongwoon,dw9714"; + reg = <0xc>; + vcc-supply = <&cam_afvdd_2v8>; + }; + touchscreen@14 { compatible = "goodix,gt911"; reg = <0x14>; @@ -157,6 +172,44 @@ pca9670: gpio@27 { pinctrl-names = "default"; reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; }; + + camera@36 { + compatible = "ovti,ov5675"; + reg = <0x36>; + clocks = <&cru SCLK_CIF_OUT>; + assigned-clocks = <&cru SCLK_CIF_OUT>; + /* Only parent to get exactly 19.2MHz */ + assigned-clock-parents = <&cru USB480M>; + assigned-clock-rates = <19200000>; + avdd-supply = <&cam_avdd_2v8>; + dvdd-supply = <&cam_dvdd_1v2>; + dovdd-supply = <&cam_dovdd_1v8>; + lens-focus = <&focus>; + orientation = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + reset-gpios = <&pca9670 6 GPIO_ACTIVE_LOW>; + rotation = <180>; + + port { + cam_out: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + remote-endpoint = <&mipi_in_cam>; + }; + }; + }; +}; + +&isp { + status = "okay"; +}; + +&isp_in { + mipi_in_cam: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&cam_out>; + }; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index feabdadfa440..46f64cd33b9b 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -351,8 +351,6 @@ power-domain@PX30_PD_GPU { pmugrf: syscon@ff010000 { compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff010000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; pmu_io_domains: io-domains { compatible = "rockchip,px30-pmu-io-voltage-domain"; @@ -453,8 +451,6 @@ gic: interrupt-controller@ff131000 { grf: syscon@ff140000 { compatible = "rockchip,px30-grf", "syscon", "simple-mfd"; reg = <0x0 0xff140000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; io_domains: io-domains { compatible = "rockchip,px30-io-voltage-domain"; @@ -1137,8 +1133,6 @@ dsi: dsi@ff450000 { resets = <&cru SRST_MIPIDSI_HOST_P>; reset-names = "apb"; rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; ports { @@ -1269,10 +1263,8 @@ ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + isp_in: port@0 { reg = <0>; - #address-cells = <1>; - #size-cells = <0>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts new file mode 100644 index 000000000000..f9f633aebb64 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar + * Copyright (c) 2019 Jagan Teki + * Copyright (C) 2024 TheSnowfield + * Copyright (C) 2025 Hsun Lai + */ + +/dts-v1/; +#include "rk3308.dtsi" +#include + +/ { + model = "Sakura Pi RK3308B"; + compatible = "sakurapi,rk3308-sakurapi-rk3308b", "rockchip,rk3308"; + + aliases { + mmc0 = &emmc; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_core: regulator-vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_log: regulator-vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_ddr: regulator-vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_io: regulator-vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_phy: regulator-vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_otg: regulator-vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake: wifi-host-wake { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&pwm3 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + no-mmc; + no-sd; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = ; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + card-detect-delay = <800>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&cru SCLK_RTC32K>; + clock-names = "lpo"; + pinctrl-names = "default"; + pinctrl-0 = <&host_wake_bt &bt_wake_host &bt_reg_on>; + device-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + }; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci{ + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi index 150fadcb0b3c..54395a40b087 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi @@ -118,6 +118,8 @@ &display_subsystem { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; ports { diff --git a/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts index 10e6ab724ac4..4d306085646c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-gameforce-chi.dts @@ -322,6 +322,8 @@ &display_subsystem { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; internal_display: panel@0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi index 446a1a6c12e7..bf4554eff47d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi @@ -220,6 +220,8 @@ &display_subsystem { }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; ports { diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 7d992c3c01ce..6438c969f9d7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -731,11 +731,7 @@ vop: vop@ff370000 { status = "disabled"; vop_out: port { - #address-cells = <1>; - #size-cells = <0>; - - vop_out_hdmi: endpoint@0 { - reg = <0>; + vop_out_hdmi: endpoint { remote-endpoint = <&hdmi_in_vop>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi index 9d5f5b083e3c..4dcceb9136b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-base.dtsi @@ -2071,8 +2071,6 @@ mipi_dsi: dsi@ff960000 { resets = <&cru SRST_P_MIPI_DSI0>; reset-names = "apb"; rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; ports { @@ -2112,8 +2110,6 @@ mipi_dsi1: dsi@ff968000 { resets = <&cru SRST_P_MIPI_DSI1>; reset-names = "apb"; rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; #phy-cells = <0>; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index a9ea4b0daa04..9d07353df52c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -250,18 +250,11 @@ &edp { */ assigned-clocks = <&cru PCLK_EDP>; assigned-clock-rates = <24000000>; +}; - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; +&edp_out { + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 5e068377a0a2..6aaaf0f7f73f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -627,8 +627,10 @@ &mipi_dphy_rx0 { }; &mipi_dsi { - status = "okay"; clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; ports { mipi_out: port@1 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index 81c4fcb30f39..352c8efb37e0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -211,7 +211,6 @@ &i2c0 { vdd_cpu_b: syr827@40 { compatible = "silergy,syr827"; reg = <0x40>; - regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; @@ -229,7 +228,6 @@ regulator-state-mem { vdd_gpu: syr828@41 { compatible = "silergy,syr828"; reg = <0x41>; - regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 5473070823cb..5a8551d9ffe4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -404,18 +404,11 @@ &edp { pinctrl-names = "default"; pinctrl-0 = <&edp_hpd>; status = "okay"; +}; - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; +&edp_out { + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index 04ba4c4565d0..585ef0fd88ef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -104,6 +104,16 @@ vcc_sys: regulator-vcc-sys { regulator-boot-on; }; + avdd2v8_dvp: regulator-avdd2v8-dvp { + compatible = "regulator-fixed"; + regulator-name = "avdd2v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: regulator-vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -136,6 +146,16 @@ vcc1v8_codec: regulator-vcc1v8-codec { vin-supply = <&vcc3v3_sys>; }; + vcc1v2_dvp: regulator-vcc1v2-dvp { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcca1v8_s3>; + }; + wifi_pwrseq: sdio-wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk818 1>; @@ -312,6 +332,8 @@ vcc3v0_touch: LDO_REG2 { vcca1v8_codec: LDO_REG3 { regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -420,6 +442,67 @@ regulator-state-mem { }; }; +&i2c1 { + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <24000000>; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer &cif_clkouta>; + status = "okay"; + + wcam: camera@1a { + compatible = "sony,imx258"; + reg = <0x1a>; + clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK0, derived from CIF_CLKO */ + lens-focus = <&wcam_lens>; + orientation = <1>; /* V4L2_CAMERA_ORIENTATION_BACK */ + pinctrl-names = "default"; + pinctrl-0 = <&camera_rst_l>; + reset-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + rotation = <270>; + /* Note: both cameras also depend on vcca1v8_codec to power the I2C bus. */ + vif-supply = <&vcc1v8_dvp>; + vana-supply = <&avdd2v8_dvp>; + vdig-supply = <&vcc1v2_dvp>; /* DVDD_DVP is the same as VCC1V2_DVP */ + + port { + wcam_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <636000000>; + remote-endpoint = <&mipi_in_wcam>; + }; + }; + }; + + wcam_lens: camera-lens@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + /* Same I2c bus as both cameras, depends on vcca1v8_codec for power. */ + vcc-supply = <&vcc1v8_dvp>; + }; + + ucam: camera@36 { + compatible = "ovti,ov8858"; + reg = <0x36>; + clocks = <&cru SCLK_CIF_OUT>; /* MIPI_MCLK1, derived from CIF_CLK0 */ + clock-names = "xvclk"; + dovdd-supply = <&vcc1v8_dvp>; + orientation = <0>; /* V4L2_CAMERA_ORIENTATION_FRONT */ + pinctrl-names = "default"; + pinctrl-0 = <&camera2_rst_l &dvp_pdn0_h>; + powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>; + rotation = <90>; + + port { + ucam_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_in_ucam>; + }; + }; + }; +}; + &i2c3 { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; @@ -462,30 +545,61 @@ &io_domains { status = "okay"; }; -&mipi_dsi { +&isp0 { status = "okay"; - clock-master; ports { - mipi_out: port@1 { - #address-cells = <0>; - #size-cells = <0>; - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; + port@0 { + mipi_in_ucam: endpoint@0 { + reg = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&ucam_out>; }; }; }; +}; + +&isp0_mmu { + status = "okay"; +}; + +&isp1 { + status = "okay"; + + ports { + port@0 { + mipi_in_wcam: endpoint@0 { + reg = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&wcam_out>; + }; + }; + }; +}; + +&mipi_dphy_rx0 { + status = "okay"; +}; + +&isp1_mmu { + status = "okay"; +}; + +&mipi_dsi { + clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; panel@0 { - compatible = "hannstar,hsd060bhw4"; + compatible = "hannstar,hsd060bhw4", "himax,hx8394"; reg = <0>; backlight = <&backlight>; - reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; - vcc-supply = <&vcc2v8_lcd>; iovcc-supply = <&vcc1v8_lcd>; pinctrl-names = "default"; + pinctrl-0 = <&lcd1_rst_pin>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc2v8_lcd>; port { mipi_in_panel: endpoint { @@ -495,6 +609,16 @@ mipi_in_panel: endpoint { }; }; +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + +&mipi_dsi1 { + status = "okay"; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; @@ -507,6 +631,24 @@ pwrbtn_pin: pwrbtn-pin { }; }; + lcd { + lcd1_rst_pin: lcd1-rst-pin { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cameras { + camera_rst_l: camera-rst-l { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + camera2_rst_l: camera2-rst-l { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + dvp_pdn0_h: dvp-pdn0-h { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { red_led_pin: red-led-pin { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso index 0377ec860d35..d28880b8dd44 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso @@ -124,12 +124,6 @@ pca9670: gpio@27 { }; }; -&mipi_out { - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; -}; - &mipi_dsi { #address-cells = <1>; #size-cells = <0>; @@ -151,6 +145,12 @@ mipi_in_panel: endpoint { }; }; +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + &pinctrl { pca9670 { pca9670_resetn: pca9670-resetn { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 15da5c80d25d..962b8b231c96 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -421,7 +421,6 @@ vdd_cpu_b: regulator@40 { compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; - regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel1_gpio>; vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; regulator-name = "vdd_cpu_b"; @@ -440,7 +439,6 @@ vdd_gpu: regulator@41 { compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; - regulator-compatible = "fan53555-reg"; pinctrl-0 = <&vsel2_gpio>; vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; regulator-name = "vdd_gpu"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso new file mode 100644 index 000000000000..dabe535f2111 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2025 Peter Robinson + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&{/} { + avdd: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-min-microvolt = <11000000>; + regulator-max-microvolt = <11000000>; + vin-supply = <&vcc3v3_s0>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <5>; + pwms = <&pwm0 0 1000000 0>; + status = "okay"; + }; +}; + +&i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + touch: touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&gpio4>; + interrupts = ; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; +}; + +&mipi_dsi { + clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mipi_panel: panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <&avdd>; + backlight = <&backlight>; + dvdd-supply = <&vcc3v3_s0>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&mipi_out { + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; +}; + +&pwm0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index a7e4adf87e7a..8b72ae6449c9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -20,15 +20,6 @@ chosen { stdout-path = "serial2:1500000n8"; }; - /* enable for panel backlight support */ - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <5>; - pwms = <&pwm0 0 1000000 0>; - status = "disabled"; - }; - clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -116,14 +107,6 @@ dit_p0_0: endpoint { }; }; - avdd: regulator-avdd { - compatible = "regulator-fixed"; - regulator-name = "avdd"; - regulator-min-microvolt = <11000000>; - regulator-max-microvolt = <11000000>; - vin-supply = <&vcc3v3_s0>; - }; - vcc12v_dcin: regulator-vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -590,19 +573,6 @@ fusb0: typec-portc@22 { vbus-supply = <&vcc5v0_typec>; status = "okay"; }; - - /* enable for pine64 touch screen support */ - touch: touchscreen@5d { - compatible = "goodix,gt911"; - reg = <0x5d>; - interrupt-parent = <&gpio4>; - interrupts = ; - AVDD28-supply = <&vcc3v0_touch>; - VDDIO-supply = <&vcc3v0_touch>; - irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; }; &i2s0 { @@ -638,36 +608,6 @@ &io_domains { gpio1830-supply = <&vcc_3v0>; }; -/* enable for pine64 panel display support */ -&mipi_dsi { - clock-master; - status = "disabled"; - - ports { - mipi_out: port@1 { - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - mipi_panel: panel@0 { - compatible = "feiyang,fy07024di26a30d"; - reg = <0>; - avdd-supply = <&avdd>; - backlight = <&backlight>; - dvdd-supply = <&vcc3v3_s0>; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - &pcie0 { ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; @@ -782,10 +722,6 @@ vcc5v0_host_en: vcc5v0-host-en { }; }; -&pwm0 { - status = "okay"; -}; - &pwm1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index fdaa8472b7a7..a4ceafe6dd7a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -142,21 +142,13 @@ sdio_pwrseq: sdio-pwrseq { &edp { status = "okay"; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; }; +&edp_out { + edp_out_panel: endpoint { + remote-endpoint = <&panel_in_edp>; + }; +}; &i2c1 { i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; diff --git a/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi index ea051362fb26..59b75c91bbb7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528-pinctrl.dtsi @@ -98,42 +98,42 @@ eth_pins: eth-pins { fephy { /omit-if-no-ref/ - fephym0_led_dpx: fephym0-led_dpx { + fephym0_led_dpx: fephym0-led-dpx { rockchip,pins = /* fephy_led_dpx_m0 */ <4 RK_PB5 2 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym0_led_link: fephym0-led_link { + fephym0_led_link: fephym0-led-link { rockchip,pins = /* fephy_led_link_m0 */ <4 RK_PC0 2 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym0_led_spd: fephym0-led_spd { + fephym0_led_spd: fephym0-led-spd { rockchip,pins = /* fephy_led_spd_m0 */ <4 RK_PB7 2 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym1_led_dpx: fephym1-led_dpx { + fephym1_led_dpx: fephym1-led-dpx { rockchip,pins = /* fephy_led_dpx_m1 */ <2 RK_PA4 5 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym1_led_link: fephym1-led_link { + fephym1_led_link: fephym1-led-link { rockchip,pins = /* fephy_led_link_m1 */ <2 RK_PA6 5 &pcfg_pull_none>; }; /omit-if-no-ref/ - fephym1_led_spd: fephym1-led_spd { + fephym1_led_spd: fephym1-led-spd { rockchip,pins = /* fephy_led_spd_m1 */ <2 RK_PA5 5 &pcfg_pull_none>; @@ -779,7 +779,7 @@ rgmii_miim: rgmii-miim { }; /omit-if-no-ref/ - rgmii_rx_bus2: rgmii-rx_bus2 { + rgmii_rx_bus2: rgmii-rx-bus2 { rockchip,pins = /* rgmii_rxd0 */ <3 RK_PA3 2 &pcfg_pull_none>, @@ -790,7 +790,7 @@ rgmii_rx_bus2: rgmii-rx_bus2 { }; /omit-if-no-ref/ - rgmii_tx_bus2: rgmii-tx_bus2 { + rgmii_tx_bus2: rgmii-tx-bus2 { rockchip,pins = /* rgmii_txd0 */ <3 RK_PA1 2 &pcfg_pull_none_drv_level_2>, @@ -801,7 +801,7 @@ rgmii_tx_bus2: rgmii-tx_bus2 { }; /omit-if-no-ref/ - rgmii_rgmii_clk: rgmii-rgmii_clk { + rgmii_rgmii_clk: rgmii-rgmii-clk { rockchip,pins = /* rgmii_rxclk */ <3 RK_PA5 2 &pcfg_pull_none>, @@ -810,7 +810,7 @@ rgmii_rgmii_clk: rgmii-rgmii_clk { }; /omit-if-no-ref/ - rgmii_rgmii_bus: rgmii-rgmii_bus { + rgmii_rgmii_bus: rgmii-rgmii-bus { rockchip,pins = /* rgmii_rxd2 */ <3 RK_PA7 2 &pcfg_pull_none>, diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts index 9f6ccd9dd1f7..12eec2c1db22 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts @@ -198,6 +198,11 @@ &gmac1 { status = "okay"; }; +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1m0_xfer>; @@ -278,6 +283,7 @@ &saradc { &sdhci { bus-width = <8>; cap-mmc-highspeed; + mmc-hs200-1_8v; no-sd; no-sdio; non-removable; diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index d1c72b52aa4e..001a555c83b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -95,6 +95,36 @@ scmi_clk: protocol@14 { }; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <875000 875000 1000000>; + opp-suspend; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <875000 875000 1000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <875000 875000 1000000>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <900000 900000 1000000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <950000 950000 1000000>; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3528-pinctrl"; rockchip,grf = <&ioc_grf>; @@ -439,13 +469,133 @@ ioc_grf: syscon@ff540000 { reg = <0x0 0xff540000 0x0 0x40000>; }; + pmu: power-management@ff600000 { + compatible = "rockchip,rk3528-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff600000 0x0 0x2000>; + + power: power-controller { + compatible = "rockchip,rk3528-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_GPU */ + power-domain@4 { + reg = <4>; + clocks = <&cru ACLK_GPU_MALI>, + <&cru PCLK_GPU_ROOT>; + pm_qos = <&qos_gpu_m0>, + <&qos_gpu_m1>; + #power-domain-cells = <0>; + }; + + /* These power domains are grouped by VD_LOGIC */ + power-domain@5 { + reg = <5>; + pm_qos = <&qos_rkvdec>; + #power-domain-cells = <0>; + status = "disabled"; + }; + power-domain@6 { + reg = <6>; + pm_qos = <&qos_rkvenc>; + #power-domain-cells = <0>; + status = "disabled"; + }; + power-domain@7 { + reg = <7>; + pm_qos = <&qos_gmac0>, + <&qos_hdcp>, + <&qos_jpegdec>, + <&qos_rga2_m0ro>, + <&qos_rga2_m0wo>, + <&qos_sdmmc0>, + <&qos_usb2host>, + <&qos_vdpp>, + <&qos_vop>; + #power-domain-cells = <0>; + status = "disabled"; + }; + power-domain@8 { + reg = <8>; + pm_qos = <&qos_emmc>, + <&qos_fspi>, + <&qos_gmac1>, + <&qos_pcie>, + <&qos_sdio0>, + <&qos_sdio1>, + <&qos_tsp>, + <&qos_usb3otg>, + <&qos_vpu>; + #power-domain-cells = <0>; + status = "disabled"; + }; + }; + }; + + gpu: gpu@ff700000 { + compatible = "rockchip,rk3528-mali", "arm,mali-450"; + reg = <0x0 0xff700000 0x0 0x40000>; + assigned-clocks = <&cru ACLK_GPU_MALI>, + <&scmi_clk SCMI_CLK_GPU>; + assigned-clock-rates = <297000000>, <300000000>; + clocks = <&cru ACLK_GPU_MALI>, <&scmi_clk SCMI_CLK_GPU>; + clock-names = "bus", "core"; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power 4>; + resets = <&cru SRST_A_GPU>; + status = "disabled"; + }; + + spi0: spi@ff9c0000 { + compatible = "rockchip,rk3528-spi", + "rockchip,rk3066-spi"; + reg = <0x0 0xff9c0000 0x0 0x1000>; + clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = ; + dmas = <&dmac 25>, <&dmac 24>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff9d0000 { + compatible = "rockchip,rk3528-spi", + "rockchip,rk3066-spi"; + reg = <0x0 0xff9d0000 0x0 0x1000>; + clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = ; + dmas = <&dmac 31>, <&dmac 30>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart0: serial@ff9f0000 { compatible = "rockchip,rk3528-uart", "snps,dw-apb-uart"; reg = <0x0 0xff9f0000 0x0 0x100>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; interrupts = ; - dmas = <&dmac 8>, <&dmac 9>; + dmas = <&dmac 9>, <&dmac 8>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -457,7 +607,7 @@ uart1: serial@ff9f8000 { clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; interrupts = ; - dmas = <&dmac 10>, <&dmac 11>; + dmas = <&dmac 11>, <&dmac 10>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -469,7 +619,7 @@ uart2: serial@ffa00000 { clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; interrupts = ; - dmas = <&dmac 12>, <&dmac 13>; + dmas = <&dmac 13>, <&dmac 12>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -481,7 +631,7 @@ uart3: serial@ffa08000 { clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; clock-names = "baudclk", "apb_pclk"; interrupts = ; - dmas = <&dmac 14>, <&dmac 15>; + dmas = <&dmac 15>, <&dmac 14>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -493,7 +643,7 @@ uart4: serial@ffa10000 { clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; clock-names = "baudclk", "apb_pclk"; interrupts = ; - dmas = <&dmac 16>, <&dmac 17>; + dmas = <&dmac 17>, <&dmac 16>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -505,7 +655,7 @@ uart5: serial@ffa18000 { clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; clock-names = "baudclk", "apb_pclk"; interrupts = ; - dmas = <&dmac 18>, <&dmac 19>; + dmas = <&dmac 19>, <&dmac 18>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -517,7 +667,7 @@ uart6: serial@ffa20000 { clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; clock-names = "baudclk", "apb_pclk"; interrupts = ; - dmas = <&dmac 20>, <&dmac 21>; + dmas = <&dmac 21>, <&dmac 20>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; @@ -529,7 +679,7 @@ uart7: serial@ffa28000 { clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; clock-names = "baudclk", "apb_pclk"; interrupts = ; - dmas = <&dmac 22>, <&dmac 23>; + dmas = <&dmac 23>, <&dmac 22>; reg-io-width = <4>; reg-shift = <2>; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3562.dtsi b/arch/arm64/boot/dts/rockchip/rk3562.dtsi index def504ffa326..f84676b47b27 100644 --- a/arch/arm64/boot/dts/rockchip/rk3562.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3562.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -351,7 +352,7 @@ pcie2x1: pcie@fe000000 { num-lanes = <1>; phys = <&combphy PHY_TYPE_PCIE>; phy-names = "pcie-phy"; - power-domains = <&power 15>; + power-domains = <&power RK3562_PD_PHP>; ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x100000 0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x1e00000 0x03000000 0x3 0x00000000 0x3 0x00000000 0x0 0x40000000>; @@ -667,48 +668,48 @@ power: power-controller { #address-cells = <1>; #size-cells = <0>; - power-domain@8 { - reg = <8>; + power-domain@RK3562_PD_GPU { + reg = ; pm_qos = <&qos_gpu>; #power-domain-cells = <0>; }; - power-domain@7 { - reg = <7>; + power-domain@RK3562_PD_NPU { + reg = ; pm_qos = <&qos_npu>; #power-domain-cells = <0>; }; - power-domain@11 { - reg = <11>; + power-domain@RK3562_PD_VDPU { + reg = ; pm_qos = <&qos_rkvdec>; #power-domain-cells = <0>; }; - power-domain@12 { - reg = <12>; + power-domain@RK3562_PD_VI { + reg = ; pm_qos = <&qos_isp>, <&qos_vicap>; #power-domain-cells = <1>; #address-cells = <1>; #size-cells = <0>; - power-domain@10 { - reg = <10>; + power-domain@RK3562_PD_VEPU { + reg = ; pm_qos = <&qos_vepu>; #power-domain-cells = <0>; }; }; - power-domain@13 { - reg = <13>; + power-domain@RK3562_PD_VO { + reg = ; pm_qos = <&qos_vop>; #power-domain-cells = <1>; #address-cells = <1>; #size-cells = <0>; - power-domain@14 { - reg = <14>; + power-domain@RK3562_PD_RGA { + reg = ; pm_qos = <&qos_rga_rd>, <&qos_rga_wr>, <&qos_jpeg>; @@ -716,8 +717,8 @@ power-domain@14 { }; }; - power-domain@15 { - reg = <15>; + power-domain@RK3562_PD_PHP { + reg = ; pm_qos = <&qos_pcie>, <&qos_usb3>; #power-domain-cells = <0>; @@ -737,7 +738,7 @@ gpu: gpu@ff320000 { ; interrupt-names = "job", "mmu", "gpu"; operating-points-v2 = <&gpu_opp_table>; - power-domains = <&power 8>; + power-domains = <&power RK3562_PD_GPU>; #cooling-cells = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi index 233eade30f21..645db9d3d297 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi @@ -469,7 +469,7 @@ regulator-state-mem { }; &i2c1 { - /* Unknown/unused device at 0x3c */ + /* Unused iSmartWare SW2001 encryption device at 0x3c */ status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index 3613661417b2..5c6f8cc401c9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -55,7 +55,7 @@ switch-cover { label = "cover"; gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; linux,input-type = ; - linux,code = ; + linux,code = ; linux,can-disable; wakeup-event-action = ; wakeup-source; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi index 3473b1eef5cd..d0e38412d56a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi @@ -282,11 +282,11 @@ lcd: panel@0 { reg = <0>; backlight = <&backlight>; enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; - rotation = <90>; power-supply = <&vcc_3v3>; + rotation = <90>; - port@0 { - panel_in_dsi: endpoint@0 { + port { + panel_in_dsi: endpoint { remote-endpoint = <&dsi0_out_con>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index b073a4d03e4f..b01f952b640e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -22,6 +22,15 @@ aliases { mmc1 = &sdhci; }; + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <20 220>; + default-brightness-level = <100>; + num-interpolated-steps = <200>; + power-supply = <&vcc3v3_sys>; + pwms = <&pwm4 0 25000 0>; + }; + chosen: chosen { stdout-path = "serial2:1500000n8"; }; @@ -184,6 +193,47 @@ &cpu3 { cpu-supply = <&vdd_cpu>; }; +&dsi0 { + clock-master; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "wanchanglong,w552793baa", "raydium,rm67200"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc3v3_lcd0_n>; + reset-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc3v3_lcd0_n>; + vsn-supply = <&vcc5v0_sys>; + vsp-supply = <&vcc5v0_sys>; + + port { + panel_in_dsi: endpoint { + remote-endpoint = <&dsi0_out_panel>; + }; + }; + }; + +}; + +&dsi0_in { + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; +}; + +&dsi0_out { + dsi0_out_panel: endpoint { + remote-endpoint = <&panel_in_dsi>; + }; +}; + +&dsi_dphy0 { + status = "okay"; +}; + &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; @@ -581,6 +631,10 @@ &pmu_io_domains { status = "okay"; }; +&pwm4 { + status = "okay"; +}; + &saradc { vref-supply = <&vcca_1v8>; status = "okay"; @@ -672,8 +726,9 @@ &usb2phy1_otg { }; &vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + assigned-clocks = <&cru DCLK_VOP0>, <&cru PLL_VPLL>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&xin24m>, <&cru PLL_VPLL>; + assigned-clock-rates = <0>, <132000000>, <132000000>; status = "okay"; }; @@ -687,3 +742,10 @@ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi_in_vp0>; }; }; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = ; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts index 539edc3c535f..718d1a2da8e5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts @@ -17,6 +17,19 @@ aliases { ethernet0 = &gmac0; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio4_a0_k1_pin>; + pinctrl-names = "default"; + + button-reset { + debounce-interval = <50>; + gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + label = "RESET"; + linux,code = ; + }; + }; + gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -124,6 +137,12 @@ eth_phy0_reset_pin: eth-phy0-reset-pin { }; }; + gpio-keys { + gpio4_a0_k1_pin: gpio4-a0-k1-pin { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + gpio-leds { lan1_led_pin: lan1-led-pin { rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi index a28b4af10d13..e3f44ea4eabe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi @@ -18,12 +18,27 @@ / { aliases { mmc0 = &sdmmc0; mmc1 = &sdhci; + rtc0 = &hym8563; }; chosen: chosen { stdout-path = "serial2:1500000n8"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "MASKROM"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + hdmi-con { compatible = "hdmi-connector"; type = "a"; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso new file mode 100644 index 000000000000..242ccfaf711b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5-v1.2-wifibt.dtso @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * DT-overlay to enable the onboard WiFi and Bluetooth module present in v1.2 + * boards. Note that v1.1 boards use a different module, so this probably won't + * work there. + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + clock-names = "lpo"; + clocks = <&hym8563>; + interrupt-names = "host-wake"; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-0 = <&wifi_wake_host>; + pinctrl-names = "default"; + }; +}; + +&uart4 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clock-names = "lpo"; + clocks = <&hym8563>; + device-wakeup-gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wakeup"; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-0 = <&bt_reg_on>, <&bt_wake_host>, <&host_wake_bt>; + pinctrl-names = "default"; + shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + vbat-supply = <&vcc_3v3_s3>; + vddio-supply = <&vcc_1v8_s3>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts index 801b40fea4e8..101e2ee9766d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts @@ -196,6 +196,30 @@ vcc_5v0_device: regulator-vcc-5v0-device { vin-supply = <&vcc_12v0_dcin>; }; + vcc_5v0_typec0: regulator-vcc-5v0-typec0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwren>; + regulator-name = "vcc_5v0_typec0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_device>; + }; + + vcc_5v0_usbhost: regulator-vcc-5v0-usbhost { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + regulator-name = "vcc_5v0_usbhost"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_device>; + }; + vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 { compatible = "regulator-fixed"; regulator-name = "vcc_3v3_ufs_s0"; @@ -205,6 +229,19 @@ vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 { regulator-max-microvolt = <3300000>; vin-supply = <&vcc_5v0_sys>; }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on>; + reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; + }; +}; + +&combphy1_psu { + status = "okay"; }; &combphy0_ps { @@ -246,30 +283,20 @@ &cpu_l3 { &gmac0 { phy-mode = "rgmii-id"; clock_in_out = "output"; - - snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 20000 100000>; - + phy-handle = <&rgmii_phy0>; pinctrl-names = "default"; pinctrl-0 = <ð0m0_miim ð0m0_tx_bus2 ð0m0_rx_bus2 ð0m0_rgmii_clk ð0m0_rgmii_bus>; - - phy-handle = <&rgmii_phy0>; status = "okay"; }; &gmac1 { phy-mode = "rgmii-id"; clock_in_out = "output"; - - snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 20000 100000>; - + phy-handle = <&rgmii_phy1>; pinctrl-names = "default"; pinctrl-0 = <ð1m0_miim ð1m0_tx_bus2 @@ -277,8 +304,6 @@ ð1m0_rx_bus2 ð1m0_rgmii_clk ð1m0_rgmii_bus ðm0_clk1_25m_out>; - - phy-handle = <&rgmii_phy1>; status = "okay"; }; @@ -671,6 +696,58 @@ regulator-state-mem { &i2c2 { status = "okay"; + usbc0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_interrupt>; + vbus-supply = <&vcc_5v0_typec0>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + /* fusb302 supports PD Rev 2.0 Ver 1.2 */ + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>; + power-role = "source"; + source-pdos = ; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0xffffffff>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_hs_ep: endpoint { + remote-endpoint = <&usb_drd0_hs_ep>; + }; + }; + port@1 { + reg = <1>; + usbc0_ss_ep: endpoint { + remote-endpoint = <&usb_drd0_ss_ep>; + }; + }; + port@2 { + reg = <2>; + usbc0_dp_ep: endpoint { + remote-endpoint = <&usbdp_phy_ep>; + }; + }; + }; + }; + }; + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; @@ -708,6 +785,11 @@ rgmii_phy0: phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x1>; clocks = <&cru REFCLKO25M_GMAC0_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; }; }; @@ -716,6 +798,11 @@ rgmii_phy1: phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x1>; clocks = <&cru REFCLKO25M_GMAC1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; }; }; @@ -728,6 +815,15 @@ &pcie0 { }; &pinctrl { + gmac { + gmac0_rst: gmac0-rst { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + gmac1_rst: gmac1-rst { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + headphone { hp_det: hp-det { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; @@ -757,6 +853,48 @@ pcie_reset: pcie-reset { rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + usb_otg0_pwren: usb-otg0-pwren { + rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + usbc0_interrupt: usbc0-interrupt { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + usbc0_sbu1: usbc0-sbu1 { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + usbc0_sbu2: usbc0-sbu2 { + rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-wlan { + wifi_wake_host: wifi-wake-host { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + wifi_reg_on: wifi-reg-on { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &sai1 { @@ -784,6 +922,23 @@ &sdhci { status = "okay"; }; +&sdio { + bus-width = <4>; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-sd; + no-mmc; + non-removable; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + wakeup-source; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -798,11 +953,81 @@ &sdmmc { status = "okay"; }; +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc_5v0_usbhost>; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; +/* Used by Bluetooth modules, enabled in a version specific overlay */ +&uart4 { + pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&usb_drd0_dwc3 { + usb-role-switch; + dr_mode = "otg"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_drd0_hs_ep: endpoint { + remote-endpoint = <&usbc0_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + usb_drd0_ss_ep: endpoint { + remote-endpoint = <&usbc0_ss_ep>; + }; + }; + }; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&usbdp_phy { + mode-switch; + orientation-switch; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>; + sbu1-dc-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + usbdp_phy_ep: endpoint { + remote-endpoint = <&usbc0_dp_ep>; + }; + }; +}; + &vop { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts index 0902d694cef4..56527c56830e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts @@ -282,6 +282,11 @@ ð1m0_rgmii_bus status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi new file mode 100644 index 000000000000..9187012d6fa4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-core3576.dtsi @@ -0,0 +1,749 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. + * Copyright (c) 2025 John Clark + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "rk3576.dtsi" + +/ { + model = "Luckfox Core3576 Module"; + compatible = "luckfox,core3576","rockchip,rk3576"; + + aliases { + mmc0 = &sdhci; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + hdmi-pwr-supply = <&vcc_5v0_hdmi>; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + vbus_5v0_typec: regulator-vbus-5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwr_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vbus5v0_typec"; + vin-supply = <&vcc_5v0_device>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vcc_2v0_pldo_s3"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3_pcie: regulator-vcc-3v3-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_pcie"; + startup-delay-us = <1000>; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_rtc_s5"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_5v0_dcin: regulator-vcc-5v0-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_dcin"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_5v0_device: regulator-vcc-5v0-device { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_device"; + vin-supply = <&vcc_5v0_dcin>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_hdmi: regulator-vcc-5v0-hdmi { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_con_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_hdmi"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_host: regulator-vcc-5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwr_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_host"; + vin-supply = <&vcc_5v0_device>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_sys: regulator-vcc-5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_sys"; + vin-supply = <&vcc_5v0_dcin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc_5v0_sys>; + vcc2-supply = <&vcc_5v0_sys>; + vcc3-supply = <&vcc_5v0_sys>; + vcc4-supply = <&vcc_5v0_sys>; + vcc5-supply = <&vcc_5v0_sys>; + vcc6-supply = <&vcc_5v0_sys>; + vcc7-supply = <&vcc_5v0_sys>; + vcc8-supply = <&vcc_5v0_sys>; + vcc9-supply = <&vcc_5v0_sys>; + vcc10-supply = <&vcc_5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc_5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc_5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + hdmi { + hdmi_con_en: hdmi-con-en { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_reset: pcie-reset { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + usb_host_pwr_en: usb-host-pwr-en { + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg0_pwr_en: usb-otg0-pwr-en { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&rng { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + full-pwr-cycle-in-suspend; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sd; + no-sdio; + non-removable; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc_5v0_host>; + status = "okay"; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts new file mode 100644 index 000000000000..6c75959adfe1 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-luckfox-omni3576.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Rockchip Electronics Co., Ltd. + * Copyright (c) 2025 John Clark + */ + +/dts-v1/; + +#include "rk3576-luckfox-core3576.dtsi" + +/ { + model = "Luckfox Omni3576 Carrier Board"; + compatible = "luckfox,omni3576", "luckfox,core3576", "rockchip,rk3576"; + + aliases { + mmc1 = &sdmmc; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_green_pin>; + + green_led: green-led { + color = ; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&pinctrl { + leds { + led_green_pin: led-green-pin { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file mode 100644 index 000000000000..cce34c541f7c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts @@ -0,0 +1,941 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd. + * Copyright (c) 2025 John Clark + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include +#include "rk3576.dtsi" + +/ { + model = "FriendlyElec NanoPi M5"; + compatible = "friendlyarm,nanopi-m5", "rockchip,rk3576"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + hdmi-pwr-supply = <&vcc5v_hdmi_tx>; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + usr_button: key-1 { + debounce-interval = <50>; + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + label = "user"; + linux,code = ; + pinctrl-names = "default"; + pinctrl-0 = <&usr_button_l>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: led-0 { + color = ; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>; + label = "sys"; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_sys_h>; + }; + + led1: led-1 { + color = ; + function = LED_FUNCTION_LAN; + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + label = "led1"; + linux,default-trigger = "netdev"; + pinctrl-names = "default"; + pinctrl-0 = <&led1_h>; + }; + + led2: led-2 { + color = ; + function = LED_FUNCTION_LAN; + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>; + label = "led2"; + linux,default-trigger = "netdev"; + pinctrl-names = "default"; + pinctrl-0 = <&led2_h>; + }; + }; + + usb3_port2_5v: regulator-usb3-port2-5v { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_host_pwren_h>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "usb3_port2_5v"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-name = "vcc12v_dcin"; + }; + + vcc3v3_m2_keym: regulator-vcc3v3-m2-keym { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pwren_h>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_m2_keym"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwren_h>; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sd_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_sys_s5"; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwren_h>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_usb_otg0"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc5v_hdmi_tx: regulator-vcc5v-hdmi-tx { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v_hdmi_tx"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vcc_2v0_pldo_s3"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_l>; + + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "realtek,rt5616-codec"; + + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR", + "IN1P", "Microphone Jack"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack"; + + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&fspi1m1_pins { + /* gpio1_d5, gpio1_c4-c7 (clk, d0-d4) are for spi nor flash */ + /* gpio1_d0-d4 muxed to sai2 audio functions */ + rockchip,pins = + <1 RK_PD5 3 &pcfg_pull_none>, + <1 RK_PC4 3 &pcfg_pull_none>, + <1 RK_PC5 3 &pcfg_pull_none>, + <1 RK_PC6 3 &pcfg_pull_none>, + <1 RK_PC7 3 &pcfg_pull_none>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s3>; + pinctrl-names = "default"; + pinctrl-0 = <ð0m0_miim>, + <ð0m0_tx_bus2>, + <ð0m0_rx_bus2>, + <ð0m0_rgmii_clk>, + <ð0m0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s3>; + pinctrl-names = "default"; + pinctrl-0 = <ð1m0_miim>, + <ð1m0_tx_bus2>, + <ð1m0_rx_bus2>, + <ð1m0_rgmii_clk>, + <ð1m0_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys_s5>; + vcc2-supply = <&vcc5v0_sys_s5>; + vcc3-supply = <&vcc5v0_sys_s5>; + vcc4-supply = <&vcc5v0_sys_s5>; + vcc5-supply = <&vcc5v0_sys_s5>; + vcc6-supply = <&vcc5v0_sys_s5>; + vcc7-supply = <&vcc5v0_sys_s5>; + vcc8-supply = <&vcc5v0_sys_s5>; + vcc9-supply = <&vcc5v0_sys_s5>; + vcc10-supply = <&vcc5v0_sys_s5>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys_s5>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys_s5>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_big_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c5 { + clock-frequency = <200000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5m3_xfer>; + status = "okay"; + + rt5616: audio-codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + assigned-clocks = <&cru CLK_SAI2_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru CLK_SAI2_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&mdio0 { + rgmii_phy0: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC0_OUT>; + interrupt-parent = <&gpio2>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_int>, <&gmac0_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC1_OUT>; + interrupt-parent = <&gpio3>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_int>, <&gmac1_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_perstn>; + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_m2_keym>; + status = "okay"; +}; + +&pinctrl { + gmac { + gmac0_int: gmac0-int { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + gmac0_rst: gmac0-rst { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + gmac1_int: gmac1-int { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + gmac1_rst: gmac1-rst { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + usr_button_l: usr-button-l { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + led_sys_h: led-sys-h { + rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led1_h: led1-h { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led2_h: led2-h { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie0_pwren_h: pcie0-pwren-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie0_perstn: pcie0-perstn { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc0_pwren_h: sdmmc0-pwren-h { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sound { + hp_det_l: hp-det-l { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb3_host_pwren_h: usb3-host-pwren-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + usb_otg0_pwren_h: usb-otg0-pwren-h { + rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_det>, <&sdmmc0_bus4>; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc3v3_sd_s0>; + status = "okay"; +}; + +&sfc1 { + pinctrl-names = "default"; + pinctrl-0 = <&fspi1m1_csn0>, <&fspi1m1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + vcc-supply = <&vcc_1v8_s3>; + }; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vcc5v0_usb_otg0>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&usb3_port2_5v>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usbdp_phy { + status = "okay"; +}; + +&usb_drd0_dwc3 { + dr_mode = "otg"; + extcon = <&u2phy0>; + status = "okay"; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts index 6756403111e7..9bc33422ced5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts @@ -37,6 +37,14 @@ hdmi_con_in: endpoint { }; }; + rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_h>; + radio-type = "wlan"; + shutdown-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; + }; + leds: leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -57,13 +65,13 @@ user-led { }; }; - vcc_12v0_dcin: regulator-vcc-12v0-dcin { + vcc_5v0_dcin: regulator-vcc-5v0-dcin { compatible = "regulator-fixed"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-name = "vcc_12v0_dcin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_dcin"; }; vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { @@ -159,6 +167,19 @@ vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 { vin-supply = <&vcc_5v0_sys>; }; + vcc_3v3_wifi: regulator-vcc-3v3-wifi { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_wifi_pwr>; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_wifi"; + vin-supply = <&vcc_3v3_s3>; + }; + vcc_5v0_device: regulator-vcc-5v0-device { compatible = "regulator-fixed"; regulator-always-on; @@ -166,7 +187,7 @@ vcc_5v0_device: regulator-vcc-5v0-device { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-name = "vcc_5v0_device"; - vin-supply = <&vcc_12v0_dcin>; + vin-supply = <&vcc_5v0_sys>; }; vcc_5v0_host: regulator-vcc-5v0-host { @@ -180,7 +201,21 @@ vcc_5v0_host: regulator-vcc-5v0-host { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-name = "vcc5v0_host"; - vin-supply = <&vcc_5v0_device>; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_5v0_otg: regulator-vcc-5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_otg"; + vin-supply = <&vcc_5v0_sys>; }; vcc_5v0_sys: regulator-vcc-5v0-sys { @@ -190,10 +225,14 @@ vcc_5v0_sys: regulator-vcc-5v0-sys { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-name = "vcc_5v0_sys"; - vin-supply = <&vcc_12v0_dcin>; + vin-supply = <&vcc_5v0_dcin>; }; }; +&combphy0_ps { + status = "okay"; +}; + &combphy1_psu { status = "okay"; }; @@ -265,6 +304,10 @@ hdmi_out_con: endpoint { }; }; +&hdmi_sound { + status = "okay"; +}; + &hdptxphy { status = "okay"; }; @@ -641,17 +684,27 @@ hym8563: rtc@51 { &mdio0 { rgmii_phy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id001c.c916"; reg = <0x1>; clocks = <&cru REFCLKO25M_GMAC0_OUT>; + assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>; + assigned-clock-rates = <25000000>; pinctrl-names = "default"; pinctrl-0 = <&rtl8211f_rst>; reset-assert-us = <20000>; reset-deassert-us = <100000>; - reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; }; }; +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset>; + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_pcie>; + status = "okay"; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { @@ -678,13 +731,33 @@ pcie { pcie_pwren: pcie-pwren { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; + pcie_reset: pcie-reset { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; usb { usb_host_pwren: usb-host-pwren { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>; + }; }; + + wifi { + usb_wifi_pwr: usb-wifi-pwr { + rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + wifi_en_h: wifi-en-h { + rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&sai6 { + status = "okay"; }; &sdmmc { @@ -721,15 +794,38 @@ &u2phy0 { status = "okay"; }; +&u2phy0_otg { + phy-supply = <&vcc_5v0_otg>; + status = "okay"; +}; + &u2phy1 { status = "okay"; }; +&u2phy1_otg { + phy-supply = <&vcc_5v0_host>; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; +&ufshc { + status = "okay"; +}; + +&usbdp_phy { + status = "okay"; +}; + +&usb_drd0_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + &usb_drd1_dwc3 { dr_mode = "host"; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index 64812e3bcb61..c3cdae8a5494 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -1155,12 +1155,14 @@ vop: vop@27d00000 { <&cru HCLK_VOP>, <&cru DCLK_VP0>, <&cru DCLK_VP1>, - <&cru DCLK_VP2>; + <&cru DCLK_VP2>, + <&hdptxphy>; clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", - "dclk_vp2"; + "dclk_vp2", + "pll_hdmiphy0"; iommus = <&vop_mmu>; power-domains = <&power RK3576_PD_VOP>; rockchip,grf = <&sys_grf>; @@ -1695,6 +1697,22 @@ sdmmc: mmc@2a310000 { status = "disabled"; }; + sdio: mmc@2a320000 { + compatible = "rockchip,rk3576-dw-mshc"; + reg = <0x0 0x2a320000 0x0 0x4000>; + clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = ; + max-frequency = <200000000>; + pinctrl-0 = <&sdmmc1m0_clk &sdmmc1m0_cmd &sdmmc1m0_bus4>; + pinctrl-names = "default"; + power-domains = <&power RK3576_PD_SDGMAC>; + resets = <&cru SRST_H_SDIO>; + reset-names = "reset"; + status = "disabled"; + }; + sdhci: mmc@2a330000 { compatible = "rockchip,rk3576-dwcmshc", "rockchip,rk3588-dwcmshc"; reg = <0x0 0x2a330000 0x0 0x10000>; @@ -2391,6 +2409,7 @@ hdptxphy: hdmiphy@2b000000 { reg = <0x0 0x2b000000 0x0 0x2000>; clocks = <&cru CLK_PHY_REF_SRC>, <&cru PCLK_HDPTX_APB>; clock-names = "ref", "apb"; + #clock-cells = <0>; resets = <&cru SRST_P_HDPTX_APB>, <&cru SRST_HDPTX_INIT>, <&cru SRST_HDPTX_CMN>, <&cru SRST_HDPTX_LANE>; reset-names = "apb", "init", "cmn", "lane"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts index ae9274365bed..39197ee19837 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-sige7.dts @@ -373,6 +373,20 @@ vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wireless-bluetooth { + bt_reset_pin: bt-reset-pin { + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_pin: bt-wake-pin { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_wake_host_irq: bt-wake-host-irq { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; }; &pwm1 { @@ -767,6 +781,28 @@ &uart2 { status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&hym8563>; + clock-names = "lpo"; + interrupt-parent = <&gpio0>; + interrupts = ; + interrupt-names = "host-wakeup"; + device-wakeup-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_wake_host_irq &bt_wake_pin &bt_reset_pin>; + vbat-supply = <&vcc_3v3_s3>; + vddio-supply = <&vcc_1v8_s3>; + }; +}; + &usbdp_phy1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index 8e912da299a2..ff1ba5ed56ef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -391,6 +391,17 @@ hdmi1_out_con: endpoint { }; }; +&hdmi_receiver_cma { + status = "okay"; +}; + +&hdmi_receiver { + hpd-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; + pinctrl-names = "default"; + status = "okay"; +}; + &hdptxphy0 { status = "okay"; }; @@ -582,6 +593,12 @@ rtl8211f_rst: rtl8211f-rst { }; + hdmirx { + hdmirx_hpd: hdmirx-5v-detection { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts index 8171fbfd819a..5fbbeb6f5a93 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts @@ -335,6 +335,17 @@ hdmi0_out_con: endpoint { }; }; +&hdmi_receiver_cma { + status = "okay"; +}; + +&hdmi_receiver { + hpd-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; + pinctrl-names = "default"; + status = "okay"; +}; + &hdptxphy0 { status = "okay"; }; @@ -478,6 +489,12 @@ key1_pin: key1-pin { }; }; + hdmirx { + hdmirx_hpd: hdmirx-5v-detection { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pcie { pcie2_0_rst: pcie2-0-rst { rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso new file mode 100644 index 000000000000..7d9b1f080b3f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar-ethernet-switch.dtso @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 Cherry Embedded Solutions GmbH + * + * Device Tree Overlay for the Ethernet Switch adapter for the Mezzanine + * connector on RK3588 Jaguar + * (manual: https://embedded.cherry.de/jaguar-ethernet-switch-user-manual/) + * + * This adapter has a KSZ9896 Ethernet Switch with 4 1GbE Ethernet connectors, + * two user controllable LEDs, and an M12 12-pin connector which exposes the + * following signals: + * - RS232/RS485 (max 250Kbps/500Kbps, RX pin1, TX pin2) + * - two digital inputs (pin4 routed to GPIO3_C5 on SoC, pin5 to GPIO4_B4) + * - two digital outputs (pin7 routed to GPIO3_D3 on SoC, pin8 to GPIO3_D1) + * - two analog inputs (pin10 to channel1 of ADS1015, pin11 to channel2) + * + * RK3588 Jaguar can be powered entirely through the adapter via the M8 3-pin + * connector (12-24V). + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include +#include +#include + +&{/} { + aliases { + ethernet1 = "/ethernet@fe1c0000"; + }; + + mezzanine-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_usr1_pin &led_usr2_pin>; + + led-1 { + gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + label = "USR1"; + }; + + led-2 { + gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + label = "USR2"; + }; + }; +}; + +&gmac1 { + clock_in_out = "output"; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_rx_bus2 + &gmac1_tx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus + ð1_pins>; + rx_delay = <0x0>; + tx_delay = <0x0>; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c1 { + #address-cells = <1>; + /* + * ADS1015 can handle high-speed (HS) mode (up to 3.4MHz) on I2C bus, + * but SoC can handle only up to 400kHz. + */ + clock-frequency = <400000>; + #size-cells = <0>; + status = "okay"; + + adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + interrupt-parent = <&gpio3>; + interrupts = ; + pinctrl-0 = <&adc_alert>; + pinctrl-names = "default"; + #io-channel-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <5>; /* Single-ended between AIN1 and GND */ + ti,datarate = <0>; + ti,gain = <5>; + }; + + channel@2 { + reg = <6>; /* Single-ended between AIN2 and GND */ + ti,datarate = <0>; + ti,gain = <5>; + }; + }; + + switch@5f { + compatible = "microchip,ksz9896"; + reg = <0x5f>; + interrupt-parent = <&gpio3>; + interrupts = ; /* ETH_INTRP_N */ + pinctrl-0 = <ð_reset_n ð_intrp_n>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; /* ETH_RESET */ + microchip,synclko-disable; /* CLKO_25_125 only routed to TP1 */ + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + label = "ETH1"; + }; + + lan2: port@1 { + reg = <1>; + label = "ETH2"; + }; + + lan3: port@2 { + reg = <2>; + label = "ETH3"; + }; + + lan4: port@3 { + reg = <3>; + label = "ETH4"; + }; + + port@5 { + reg = <5>; + ethernet = <&gmac1>; + label = "CPU"; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&pinctrl { + adc { + adc_alert: adc-alert-irq { + rockchip,pins = + <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ethernet { + eth_intrp_n: eth-intrp-n { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + eth_reset_n: eth-reset-n { + rockchip,pins = + <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_usr1_pin: led-usr1-pin { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + led_usr2_pin: led-usr2-pin { + rockchip,pins = + <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&uart9 { + /* GPIO3_D0/EN_RS485_MODE for switching between RS232 and RS485 */ + pinctrl-0 = <&uart9m2_xfer &uart9m2_rtsn>; + pinctrl-names = "default"; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts index ebe77cdd24e8..176925d0a1a8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -10,6 +10,7 @@ #include #include #include +#include "rk8xx.h" #include "rk3588.dtsi" / { @@ -693,6 +694,7 @@ pmic@0 { vcc13-supply = <&vcc_1v1_nldo_s3>; vcc14-supply = <&vcc_1v1_nldo_s3>; vcca-supply = <&vcc5v0_sys>; + rockchip,reset-mode = ; rk806_dvs1_null: dvs1-null-pins { pins = "gpio_pwrctrl1"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi new file mode 100644 index 000000000000..973d39a7e0e0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi @@ -0,0 +1,878 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include +#include "rk3588.dtsi" + +/ { + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 120 150 180 210 240 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + rfkill-bt { + compatible = "rfkill-gpio"; + label = "rfkill-m2-bt"; + radio-type = "bluetooth"; + shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc3v3_pcie2x1l0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + vin-supply = <&vcc5v0_sys>; + status = "disabled"; + }; + + vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc3v3_pcie30: regulator-vcc3v3-pcie30 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_vcc3v3_en>; + regulator-name = "vcc3v3_pcie30"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdmi0_sound { + status = "okay"; +}; + +&hdmi1 { + pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + +&hdmi1_sound { + status = "okay"; +}; + +&hdmi_receiver_cma { + status = "okay"; +}; + +&hdmi_receiver { + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; + pinctrl-names = "default"; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&hdptxphy1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = ; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&i2s5_8ch { + status = "okay"; +}; + +&i2s6_8ch { + status = "okay"; +}; + +&package_thermal { + polling-delay = <1000>; + + trips { + package_fan0: package-fan0 { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + package_fan1: package-fan1 { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + trip = <&package_fan0>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map1 { + trip = <&package_fan1>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&pcie2x1l0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_rst>; + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; + status = "okay"; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_2_rst>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l2>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x4 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_rst>; + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie30>; + status = "okay"; +}; + +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie2 { + pcie2_0_rst: pcie2-0-rst { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_2_rst: pcie2-2-rst { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie3 { + pcie3_rst: pcie3-rst { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie3_vcc3v3_en: pcie3-vcc3v3-en { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&avcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&sdmmc { + max-frequency = <200000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + vcc-supply = <&vcc_3v3_s3>; + }; +}; + +&spi2 { + status = "okay"; + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + num-cs = <1>; + + pmic@0 { + compatible = "rockchip,rk806"; + spi-max-frequency = <1000000>; + reg = <0x0>; + + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + /* connected to USB hub, which is powered by vcc5v0_sys */ + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usbdp_phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = ; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi index 6052787d2560..e5c474e4d02a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi @@ -2,22 +2,9 @@ /dts-v1/; -#include -#include -#include -#include "rk3588.dtsi" +#include "rk3588-rock-5b-5bp-5t.dtsi" / { - aliases { - mmc0 = &sdhci; - mmc1 = &sdmmc; - mmc2 = &sdio; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - analog-sound { compatible = "audio-graph-card"; label = "rk3588-es8316"; @@ -35,28 +22,6 @@ analog-sound { pinctrl-0 = <&hp_detect>; }; - hdmi0-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi0_con_in: endpoint { - remote-endpoint = <&hdmi0_out_con>; - }; - }; - }; - - hdmi1-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi1_con_in: endpoint { - remote-endpoint = <&hdmi1_out_con>; - }; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -70,369 +35,19 @@ led_rgb_b { }; }; - fan: pwm-fan { - compatible = "pwm-fan"; - cooling-levels = <0 120 150 180 210 240 255>; - fan-supply = <&vcc5v0_sys>; - pwms = <&pwm1 0 50000 0>; - #cooling-cells = <2>; - }; - rfkill { compatible = "rfkill-gpio"; label = "rfkill-m2-wlan"; radio-type = "wlan"; shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; }; - - rfkill-bt { - compatible = "rfkill-gpio"; - label = "rfkill-m2-bt"; - radio-type = "bluetooth"; - shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; - }; - - vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_0_vcc3v3_en>; - regulator-name = "vcc3v3_pcie2x1l0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <50000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie2x1l2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <5000>; - vin-supply = <&vcc_3v3_s3>; - }; - - vcc3v3_pcie30: regulator-vcc3v3-pcie30 { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie3_vcc3v3_en>; - regulator-name = "vcc3v3_pcie30"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <5000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_host: regulator-vcc5v0-host { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_host"; - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: regulator-vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc_1v1_nldo_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&combphy0_ps { - status = "okay"; -}; - -&combphy1_ps { - status = "okay"; -}; - -&combphy2_psu { - status = "okay"; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&gpu { - mali-supply = <&vdd_gpu_s0>; - status = "okay"; -}; - -&hdmi0 { - status = "okay"; -}; - -&hdmi0_in { - hdmi0_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi0>; - }; -}; - -&hdmi0_out { - hdmi0_out_con: endpoint { - remote-endpoint = <&hdmi0_con_in>; - }; -}; - -&hdmi0_sound { - status = "okay"; -}; - -&hdmi1 { - pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd - &hdmim1_tx1_scl &hdmim1_tx1_sda>; - status = "okay"; -}; - -&hdmi1_in { - hdmi1_in_vp1: endpoint { - remote-endpoint = <&vp1_out_hdmi1>; - }; -}; - -&hdmi1_out { - hdmi1_out_con: endpoint { - remote-endpoint = <&hdmi1_con_in>; - }; -}; - -&hdmi1_sound { - status = "okay"; -}; - -&hdmi_receiver_cma { - status = "okay"; }; &hdmi_receiver { hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>; - pinctrl-names = "default"; status = "okay"; }; -&hdptxphy0 { - status = "okay"; -}; - -&hdptxphy1 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0m2_xfer>; - status = "okay"; - - vdd_cpu_big0_s0: regulator@42 { - compatible = "rockchip,rk8602"; - reg = <0x42>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big0_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_big1_s0: regulator@43 { - compatible = "rockchip,rk8603", "rockchip,rk8602"; - reg = <0x43>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big1_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c6 { - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - interrupt-parent = <&gpio0>; - interrupts = ; - wakeup-source; - }; -}; - -&i2c7 { - status = "okay"; - - es8316: audio-codec@11 { - compatible = "everest,es8316"; - reg = <0x11>; - clocks = <&cru I2S0_8CH_MCLKOUT>; - clock-names = "mclk"; - assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; - assigned-clock-rates = <12288000>; - #sound-dai-cells = <0>; - - port { - es8316_p0_0: endpoint { - remote-endpoint = <&i2s0_8ch_p0_0>; - }; - }; - }; -}; - -&i2s0_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_lrck - &i2s0_mclk - &i2s0_sclk - &i2s0_sdi0 - &i2s0_sdo0>; - status = "okay"; - - i2s0_8ch_p0: port { - i2s0_8ch_p0_0: endpoint { - dai-format = "i2s"; - mclk-fs = <256>; - remote-endpoint = <&es8316_p0_0>; - }; - }; -}; - -&i2s5_8ch { - status = "okay"; -}; - -&i2s6_8ch { - status = "okay"; -}; - -&package_thermal { - polling-delay = <1000>; - - trips { - package_fan0: package-fan0 { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - package_fan1: package-fan1 { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - map0 { - trip = <&package_fan0>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map1 { - trip = <&package_fan1>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; -}; - -&pcie2x1l0 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_0_rst>; - reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie2x1l0>; - status = "okay"; -}; - -&pcie2x1l2 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_2_rst>; - reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie2x1l2>; - status = "okay"; -}; - -&pcie30phy { - status = "okay"; -}; - -&pcie3x4 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie3_rst>; - reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie30>; - status = "okay"; -}; - -&pd_gpu { - domain-supply = <&vdd_gpu_s0>; -}; - &pinctrl { hdmirx { hdmirx_hpd: hdmirx-5v-detection { @@ -440,506 +55,32 @@ hdmirx_hpd: hdmirx-5v-detection { }; }; - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - leds { led_rgb_b: led-rgb-b { rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + pcie2 { + pcie2_0_vcc3v3_en: pcie2-0-vcc-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sound { hp_detect: hp-detect { rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - - pcie2 { - pcie2_0_rst: pcie2-0-rst { - rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie2_0_vcc3v3_en: pcie2-0-vcc-en { - rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie2_2_rst: pcie2-2-rst { - rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie3 { - pcie3_rst: pcie3-rst { - rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie3_vcc3v3_en: pcie3-vcc3v3-en { - rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm1 { - status = "okay"; -}; - -&saradc { - vref-supply = <&avcc_1v8_s0>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&sdmmc { - max-frequency = <200000000>; - no-sdio; - no-mmc; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3_s3>; - vqmmc-supply = <&vccio_sd_s0>; - status = "okay"; -}; - -&sfc { - pinctrl-names = "default"; - pinctrl-0 = <&fspim2_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - vcc-supply = <&vcc_3v3_s3>; - }; -}; - -&spi2 { - status = "okay"; - assigned-clocks = <&cru CLK_SPI2>; - assigned-clock-rates = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; - num-cs = <1>; - - pmic@0 { - compatible = "rockchip,rk806"; - spi-max-frequency = <1000000>; - reg = <0x0>; - - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, - <&rk806_dvs2_null>, <&rk806_dvs3_null>; - - system-power-controller; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc5v0_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc_2v0_pldo_s3>; - vcc12-supply = <&vcc5v0_sys>; - vcc13-supply = <&vcc_1v1_nldo_s3>; - vcc14-supply = <&vcc_1v1_nldo_s3>; - vcca-supply = <&vcc5v0_sys>; - - gpio-controller; - #gpio-cells = <2>; - - rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl1"; - function = "pin_fun0"; - }; - - rk806_dvs2_null: dvs2-null-pins { - pins = "gpio_pwrctrl2"; - function = "pin_fun0"; - }; - - rk806_dvs3_null: dvs3-null-pins { - pins = "gpio_pwrctrl3"; - function = "pin_fun0"; - }; - - regulators { - vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_gpu_s0"; - regulator-enable-ramp-delay = <400>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_cpu_lit_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_log_s0: dcdc-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <750000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_log_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_vdenc_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_ddr_s0: dcdc-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <900000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_ddr_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - vdd2_ddr_s3: dcdc-reg6 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vdd2_ddr_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_2v0_pldo_s3: dcdc-reg7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-ramp-delay = <12500>; - regulator-name = "vdd_2v0_pldo_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2000000>; - }; - }; - - vcc_3v3_s3: dcdc-reg8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vddq_ddr_s0: dcdc-reg9 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vddq_ddr_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s3: dcdc-reg10 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avcc_1v8_s0: pldo-reg1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "avcc_1v8_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s0: pldo-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avdd_1v2_s0: pldo-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "avdd_1v2_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3_s0: pldo-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - regulator-name = "vcc_3v3_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd_s0: pldo-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - regulator-name = "vccio_sd_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - pldo6_s3: pldo-reg6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "pldo6_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_0v75_s3: nldo-reg1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "vdd_0v75_s3"; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_ddr_pll_s0: nldo-reg2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-name = "vdd_ddr_pll_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - avdd_0v75_s0: nldo-reg3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "avdd_0v75_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v85_s0: nldo-reg4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-name = "vdd_0v85_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v75_s0: nldo-reg5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-name = "vdd_0v75_s0"; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&tsadc { - status = "okay"; -}; - -&uart2 { - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; -}; - -&u2phy1 { - status = "okay"; -}; - -&u2phy1_otg { - status = "okay"; -}; - -&u2phy2 { - status = "okay"; -}; - -&u2phy2_host { - /* connected to USB hub, which is powered by vcc5v0_sys */ - phy-supply = <&vcc5v0_sys>; - status = "okay"; -}; - -&u2phy3 { - status = "okay"; -}; - -&u2phy3_host { - phy-supply = <&vcc5v0_host>; - status = "okay"; -}; - -&usbdp_phy1 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - dr_mode = "host"; - status = "okay"; }; &usb_host2_xhci { status = "okay"; }; -&vop { +&vcc3v3_pcie2x1l0 { + gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_vcc3v3_en>; status = "okay"; }; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = ; - remote-endpoint = <&hdmi0_in_vp0>; - }; -}; - -&vp1 { - vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { - reg = ; - remote-endpoint = <&hdmi1_in_vp1>; - }; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts new file mode 100644 index 000000000000..258c7400301d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3588-rock-5b-5bp-5t.dtsi" + +/ { + model = "Radxa ROCK 5T"; + compatible = "radxa,rock-5t", "rockchip,rk3588"; + + analog-sound { + compatible = "audio-graph-card"; + label = "rk3588-es8316"; + + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + + dais = <&i2s0_8ch_p0>; + hp-det-gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_rgb_b>; + + led_rgb_b { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + rfkill { + compatible = "rfkill-gpio"; + label = "rfkill-m2-wlan"; + radio-type = "wlan"; + shutdown-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; + }; + + vcc3v3_pcie2x1l1: regulator-vcc3v3-pcie2x1l2 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie2x1l1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&hdmi_receiver { + hpd-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie2x1l1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_1_rst>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie2x1l1>; + status = "okay"; +}; + +&pinctrl { + hdmirx { + hdmirx_hpd: hdmirx-5v-detection { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_rgb_b: led-rgb-b { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie2 { + pcie2_1_rst: pcie2-1-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie2_0_vcc3v3_en: pcie2-0-vcc-en { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&vcc3v3_pcie2x1l0 { + gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_vcc3v3_en>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index c4933a08dd1e..b44e89e1bb15 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include "rk8xx.h" #include "rk3588.dtsi" / { @@ -440,6 +441,7 @@ pmic@0 { vcc13-supply = <&vcc_1v1_nldo_s3>; vcc14-supply = <&vcc_1v1_nldo_s3>; vcca-supply = <&vcc5v0_sys>; + rockchip,reset-mode = ; rk806_dvs1_null: dvs1-null-pins { pins = "gpio_pwrctrl1"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index 60ad272982ad..6daea8961fdd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -398,17 +398,6 @@ rk806_dvs3_null: dvs3-null-pins { regulators { vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { - /* - * RK3588's GPU power domain cannot be enabled - * without this regulator active, but it - * doesn't have to be on when the GPU PD is - * disabled. Because the PD binding does not - * currently allow us to express this - * relationship, we have no choice but to do - * this instead: - */ - regulator-always-on; - regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts index 873a2bd6a6de..55fc7cbef58d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include "rk3588s.dtsi" @@ -456,6 +457,42 @@ &cpu_b3 { cpu-supply = <&vdd_cpu_big1_s0>; }; +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "huiling,hl055fhav028c", "himax,hx8399c"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc3v3_lcd0_n>; + pinctrl-0 = <&lcd_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + rotation = <90>; + vcc-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_panel_in: endpoint { + remote-endpoint = <&dsi0_out_panel>; + }; + }; + }; +}; + +&dsi0_in { + dsi0_in_vp3: endpoint { + remote-endpoint = <&vp3_out_dsi0>; + }; +}; + +&dsi0_out { + dsi0_out_panel: endpoint { + remote-endpoint = <&mipi_panel_in>; + }; +}; + &gpu { mali-supply = <&vdd_gpu_s0>; status = "okay"; @@ -633,6 +670,10 @@ &i2s0_sdi0 status = "okay"; }; +&mipidcphy0 { + status = "okay"; +}; + &package_thermal { polling-delay = <1000>; @@ -762,11 +803,16 @@ led_pins: led-pins { }; }; - lcd_bl_en { + lcd { lcd_bl_en: lcd-bl-en { rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; }; + + lcd_rst: lcd-rst { + rockchip,pins = + <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; pcie-pins { @@ -1239,3 +1285,21 @@ bluetooth { shutdown-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; }; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp3 { + #address-cells = <1>; + #size-cells = <0>; + + vp3_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = ; + remote-endpoint = <&dsi0_in_vp3>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts new file mode 100644 index 000000000000..7434ac39246f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts @@ -0,0 +1,840 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "rk3588s.dtsi" + +/ { + model = "Firefly Station M3"; + compatible = "firefly,rk3588s-roc-pc", "rockchip,rk3588s"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "rockchip,es8388"; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,pin-switches = "Headphones"; + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones"; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + fan: fan { + compatible = "pwm-fan"; + cooling-levels = <60 100 140 160 185 220 255>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm11 0 50000 1>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led-0 { + color = ; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = ; + default-state = "off"; + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + color = ; + default-state = "off"; + gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vbus5v0_typec: regulator-vbus5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie20: regulator-vcc3v3-pcie20 { + compatible = "regulator-fixed"; + gpio = <&gpio1 RK_PD7 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_pcie20"; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_miim + &gmac1_tx_bus2 + &gmac1_rx_bus2 + &gmac1_rgmii_clk + &gmac1_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m0_xfer>; + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + +&i2c3 { + status = "okay"; + + es8388: audio-codec@10 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x10>; + clocks = <&cru I2S1_8CH_MCLKOUT>; + AVDD-supply = <&vcc_3v3_s0>; + DVDD-supply = <&vcc_1v8_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + assigned-clocks = <&cru I2S1_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&rtl8211f_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie2x1l1 { + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie20>; + status = "okay"; +}; + +&pd_gpu { + domain-supply = <&vdd_gpu_s0>; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + headphone { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_pins: led-pins { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtl8211 { + rtl8211f_rst: rtl8211f-rst { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm11 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm11m3_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + gpio-controller; + #gpio-cells = <2>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&uart7 { + pinctrl-0 = <&uart7m2_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&u2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = ; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk8xx.h b/arch/arm64/boot/dts/rockchip/rk8xx.h new file mode 100644 index 000000000000..a6fbef71c064 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk8xx.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */ +/* + * Device Tree defines for Rockchip RK8xx PMICs + * + * Copyright 2025 Cherry Embedded Solutions GmbH + * + * Author: Quentin Schulz + */ + +#ifndef _DT_MFD_ROCKCHIP_RK8XX_H +#define _DT_MFD_ROCKCHIP_RK8XX_H + +/* For use with rockchip,reset-mode property */ +#define RK806_RESTART 0 +#define RK806_RESET 1 +#define RK806_RESET_NOTIFY 2 + +#endif diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi index aba90d555f4e..5ac9e72478dd 100644 --- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi @@ -133,6 +133,53 @@ pins { }; }; + pwm3_pins_a: pwm3-0 { + pins { + pinmux = ; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = ; /* TIM3_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = , /* TIM8_CH1 */ + ; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = , /* TIM8_CH1 */ + ; /* TIM8_CH4 */ + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = ; /* TIM12_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = ; /* TIM12_CH2 */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins1 { pinmux = , /* SDMMC1_D0 */ @@ -209,6 +256,20 @@ pins1 { }; }; + tim10_counter_pins_a: tim10-counter-0 { + pins { + pinmux = ; /* TIM10_CH1 */ + bias-disable; + }; + }; + + tim10_counter_sleep_pins_a: tim10-counter-sleep-0 { + pins { + pinmux = ; /* TIM10_CH1 */ + bias-disable; + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = ; /* USART2_TX */ diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index 8d87865850a7..303abf915b8e 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -150,7 +150,7 @@ timer { , , ; - always-on; + arm,no-tick-in-suspend; }; soc@0 { @@ -291,6 +291,273 @@ rifsc: bus@42080000 { #access-controller-cells = <1>; ranges; + timers2: timer@40000000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40000000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM2>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 1>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@1 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <1>; + status = "disabled"; + }; + }; + + timers3: timer@40010000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40010000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM3>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 2>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@2 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <2>; + status = "disabled"; + }; + }; + + timers4: timer@40020000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40020000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM4>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 3>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@3 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <3>; + status = "disabled"; + }; + }; + + timers5: timer@40030000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40030000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM5>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 4>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@4 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <4>; + status = "disabled"; + }; + }; + + timers6: timer@40040000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40040000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM6>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 5>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + timer@5 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <5>; + status = "disabled"; + }; + }; + + timers7: timer@40050000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40050000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM7>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 6>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + timer@6 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <6>; + status = "disabled"; + }; + }; + + timers12: timer@40060000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40060000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM12>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 10>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@11 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <11>; + status = "disabled"; + }; + }; + + timers13: timer@40070000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40070000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM13>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 11>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@12 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <12>; + status = "disabled"; + }; + }; + + timers14: timer@40080000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40080000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM14>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 12>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@13 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <13>; + status = "disabled"; + }; + }; + lptimer1: timer@40090000 { compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer"; reg = <0x40090000 0x400>; @@ -597,6 +864,136 @@ i2c7: i2c@40180000 { status = "disabled"; }; + timers10: timer@401c0000 { + compatible = "st,stm32mp25-timers"; + reg = <0x401c0000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM10>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 8>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@9 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <9>; + status = "disabled"; + }; + }; + + timers11: timer@401d0000 { + compatible = "st,stm32mp25-timers"; + reg = <0x401d0000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM11>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 9>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@10 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <10>; + status = "disabled"; + }; + }; + + timers1: timer@40200000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40200000 0x400>; + interrupts = , + , + , + ; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc CK_KER_TIM1>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 0>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@0 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <0>; + status = "disabled"; + }; + }; + + timers8: timer@40210000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40210000 0x400>; + interrupts = , + , + , + ; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc CK_KER_TIM8>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 7>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@7 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <7>; + status = "disabled"; + }; + }; + usart6: serial@40220000 { compatible = "st,stm32h7-uart"; reg = <0x40220000 0x400>; @@ -654,6 +1051,99 @@ spi4: spi@40240000 { status = "disabled"; }; + timers15: timer@40250000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40250000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM15>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 13>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@14 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <14>; + status = "disabled"; + }; + }; + + timers16: timer@40260000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40260000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM16>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 14>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@15 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <15>; + status = "disabled"; + }; + }; + + timers17: timer@40270000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40270000 0x400>; + interrupts = ; + interrupt-names = "global"; + clocks = <&rcc CK_KER_TIM17>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 15>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@16 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <16>; + status = "disabled"; + }; + }; + spi5: spi@40280000 { #address-cells = <1>; #size-cells = <0>; @@ -783,6 +1273,40 @@ uart9: serial@402c0000 { status = "disabled"; }; + timers20: timer@40320000 { + compatible = "st,stm32mp25-timers"; + reg = <0x40320000 0x400>; + interrupts = , + , + , + ; + interrupt-names = "brk", "up", "trg-com", "cc"; + clocks = <&rcc CK_KER_TIM20>; + clock-names = "int"; + #address-cells = <1>; + #size-cells = <0>; + access-controllers = <&rifsc 16>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + + counter { + compatible = "st,stm32mp25-timer-counter"; + status = "disabled"; + }; + + pwm { + compatible = "st,stm32mp25-pwm"; + #pwm-cells = <3>; + status = "disabled"; + }; + + timer@19 { + compatible = "st,stm32mp25-timer-trigger"; + reg = <19>; + status = "disabled"; + }; + }; + usart1: serial@40330000 { compatible = "st,stm32h7-uart"; reg = <0x40330000 0x400>; @@ -1495,7 +2019,6 @@ gpioz: gpio@46200000 { st,bank-ioport = <11>; status = "disabled"; }; - }; exti2: interrupt-controller@46230000 { diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index 2f561ad40665..836b1958ce65 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -293,6 +293,64 @@ &spi8 { status = "disabled"; }; +&timers3 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers8 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm8_pins_a>; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@7 { + status = "okay"; + }; +}; + +&timers10 { + status = "disabled"; + counter { + pinctrl-0 = <&tim10_counter_pins_a>; + pinctrl-1 = <&tim10_counter_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&timers12 { + status = "disabled"; + counter { + status = "okay"; + }; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + &usart2 { pinctrl-names = "default", "idle", "sleep"; pinctrl-0 = <&usart2_pins_a>; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index c6171de9fe88..aad9177930e6 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -33,6 +33,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62-pocketbeagle2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb +# Boards with AM62Dx SoC +dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb + # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dahlia.dtb @@ -278,24 +281,4 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-j784s4-evm-usxgmii-exp1-exp2.dtb # Enable support for device-tree overlays -DTC_FLAGS_k3-am625-beagleplay += -@ -DTC_FLAGS_k3-am625-phyboard-lyra-rdk += -@ -DTC_FLAGS_k3-am62a7-phyboard-lyra-rdk += -@ -DTC_FLAGS_k3-am625-sk += -@ -DTC_FLAGS_k3-am62-lp-sk += -@ -DTC_FLAGS_k3-am62a7-sk += -@ -DTC_FLAGS_k3-am62p5-sk += -@ -DTC_FLAGS_k3-am642-evm += -@ -DTC_FLAGS_k3-am642-phyboard-electra-rdk += -@ -DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@ -DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@ -DTC_FLAGS_k3-am68-sk-base-board += -@ -DTC_FLAGS_k3-am69-sk += -@ -DTC_FLAGS_k3-j7200-common-proc-board += -@ -DTC_FLAGS_k3-j721e-common-proc-board += -@ -DTC_FLAGS_k3-j721e-evm-pcie0-ep += -@ -DTC_FLAGS_k3-j721e-sk += -@ -DTC_FLAGS_k3-j721s2-common-proc-board += -@ -DTC_FLAGS_k3-j722s-evm += -@ -DTC_FLAGS_k3-j784s4-evm += -@ -DTC_FLAGS_k3-j742s2-evm += -@ +DTC_FLAGS := -@ diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index aafdb90c0eb7..4609f366006e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -74,6 +74,22 @@ vddshv_sdio: regulator-4 { }; &main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */ + >; + }; + vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ @@ -144,6 +160,14 @@ exp2: gpio@23 { }; }; +&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vddshv_sdio>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 9e0b6eee9ac7..120ba8f9dd0e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -553,7 +553,6 @@ sdhci0: mmc@fa10000 { clocks = <&k3_clks 57 5>, <&k3_clks 57 6>; clock-names = "clk_ahb", "clk_xin"; bus-width = <8>; - mmc-ddr-1_8v; mmc-hs200-1_8v; ti,clkbuf-sel = <0x7>; ti,otap-del-sel-legacy = <0x0>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index 1ea8f64b1b3b..bc2289d74774 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -507,16 +507,16 @@ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ /* SODIMM 12 */ /* Verdin I2C_2_DSI */ pinctrl_i2c2: main-i2c2-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ - AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ + AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */ + AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */ >; }; /* Verdin I2C_4_CSI */ pinctrl_i2c3: main-i2c3-default-pins { pinctrl-single,pins = < - AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ - AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ + AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */ + AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */ >; }; @@ -786,8 +786,8 @@ AM62X_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (C9) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SODI /* Verdin I2C_3_HDMI */ pinctrl_mcu_i2c0: mcu-i2c0-default-pins { pinctrl-single,pins = < - AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ - AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ + AM62X_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (A8) MCU_I2C0_SCL */ /* SODIMM 59 */ + AM62X_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */ >; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 2fbfa3719345..d240165bda9c 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -106,6 +106,22 @@ vcc_1v8: regulator-5 { }; &main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + main_rgmii2_pins_default: main-rgmii2-default-pins { bootph-all; pinctrl-single,pins = < @@ -195,6 +211,14 @@ exp1: gpio@22 { }; }; +&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 63e097ddf988..44e7e459f176 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -51,6 +51,7 @@ phy_gmii_sel: phy@4044 { compatible = "ti,am654-phy-gmii-sel"; reg = <0x4044 0x8>; #phy-cells = <1>; + bootph-all; }; epwm_tbclk: clock-controller@4130 { @@ -96,6 +97,7 @@ secure_proxy_main: mailbox@4d000000 { #mbox-cells = <1>; interrupt-names = "rx_012"; interrupts = ; + bootph-all; }; inta_main_dmss: interrupt-controller@48000000 { @@ -131,6 +133,7 @@ main_bcdma: dma-controller@485c0100 { ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + bootph-all; }; main_pktdma: dma-controller@485c0000 { @@ -147,6 +150,8 @@ main_pktdma: dma-controller@485c0000 { "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; + bootph-all; + ti,sci = <&dmsc>; ti,sci-dev-id = <30>; ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ @@ -220,16 +225,19 @@ dmsc: system-controller@44043000 { k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; + bootph-all; }; k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; + bootph-all; }; k3_reset: reset-controller { compatible = "ti,sci-reset"; #reset-cells = <2>; + bootph-all; }; }; @@ -254,6 +262,7 @@ secure_proxy_sa3: mailbox@43600000 { * firmware on non-MPU processors */ status = "disabled"; + bootph-all; }; main_pmx0: pinctrl@f4000 { @@ -282,6 +291,7 @@ main_timer0: timer@2400000 { assigned-clock-parents = <&k3_clks 36 3>; power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; ti,timer-pwm; + bootph-all; }; main_timer1: timer@2410000 { @@ -651,6 +661,7 @@ usb0: usb@31000000 { interrupt-names = "host", "peripheral"; maximum-speed = "high-speed"; dr_mode = "otg"; + bootph-all; snps,usb2-gadget-lpm-disable; snps,usb2-lpm-disable; }; @@ -745,6 +756,7 @@ cpsw_port1: port@1 { phys = <&phy_gmii_sel 1>; mac-address = [00 00 00 00 00 00]; ti,syscon-efuse = <&cpsw_mac_syscon 0x0>; + bootph-all; }; cpsw_port2: port@2 { @@ -764,6 +776,7 @@ cpsw3g_mdio: mdio@f00 { clocks = <&k3_clks 13 0>; clock-names = "fck"; bus_freq = <1000000>; + bootph-all; }; cpts@3d000 { diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi index 259ae6ebbfb5..9ef1c829a9df 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi @@ -17,6 +17,7 @@ wkup_conf: bus@43000000 { chipid: chipid@14 { compatible = "ti,am654-chipid"; reg = <0x14 0x4>; + bootph-all; }; opp_efuse_table: syscon@18 { @@ -67,6 +68,7 @@ wkup_uart0: serial@0 { reg = <0 0x100>; interrupts = ; status = "disabled"; + bootph-pre-ram; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index b27759026014..bceead5e288e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -36,6 +36,7 @@ memory@80000000 { /* 4G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>, <0x00000008 0x80000000 0x00000000 0x80000000>; + bootph-all; }; reserved-memory { @@ -151,6 +152,7 @@ vdd_mmc1: regulator-3 { regulator-boot-on; enable-active-high; gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + bootph-all; }; vcc_3v3_sys: regulator-4 { @@ -297,12 +299,13 @@ main_uart0_pins_default: main-uart0-default-pins { AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ >; + bootph-all; }; main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < - AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */ - AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */ + AM62AX_IOPAD(0x01ac, PIN_INPUT, 2) /* (B21) MCASP0_AFSR.UART1_RXD */ + AM62AX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (A21) MCASP0_ACLKR.UART1_TXD */ AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */ AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */ >; @@ -320,6 +323,7 @@ main_i2c1_pins_default: main-i2c1-default-pins { AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ >; + bootph-all; }; main_i2c2_pins_default: main-i2c2-default-pins { @@ -356,6 +360,7 @@ AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ >; + bootph-all; }; usr_led_pins_default: usr-led-default-pins { @@ -375,6 +380,7 @@ main_mdio1_pins_default: main-mdio1-default-pins { AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ >; + bootph-all; }; main_rgmii1_pins_default: main-rgmii1-default-pins { @@ -392,6 +398,7 @@ AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */ AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */ AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */ >; + bootph-all; }; main_mcasp1_pins_default: main-mcasp1-default-pins { @@ -572,6 +579,7 @@ exp1: gpio@22 { #interrupt-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", "BT_EN_SOC", "MMC1_SD_EN", @@ -675,10 +683,12 @@ &sdhci1 { pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; disable-wp; + bootph-all; }; &main_gpio0 { status = "okay"; + bootph-all; }; &main_gpio1 { @@ -693,6 +703,7 @@ &main_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; }; /* Main UART1 is used for TIFS firmware logs */ @@ -739,10 +750,15 @@ &cpsw3g { pinctrl-0 = <&main_rgmii1_pins_default>; }; +&phy_gmii_sel { + bootph-all; +}; + &cpsw_port1 { status = "okay"; phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; + bootph-all; }; &cpsw_port2 { @@ -759,6 +775,7 @@ cpsw3g_phy0: ethernet-phy@0 { ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; + bootph-all; }; }; @@ -876,3 +893,45 @@ &c7x_0 { &main_rti4 { status = "reserved"; }; + +&fss { + status = "okay"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + bootph-all; + }; +}; + +&main_pmx0 { + ospi0_pins_default: ospi0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62AX_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ + AM62AX_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ + AM62AX_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ + AM62AX_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ + AM62AX_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ + AM62AX_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ + AM62AX_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */ + AM62AX_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */ + AM62AX_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */ + AM62AX_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts new file mode 100644 index 000000000000..daea18b0bc61 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * AM62D2 EVM: https://www.ti.com/lit/zip/sprcal5 + * + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include +#include +#include +#include "k3-am62d2.dtsi" + +/ { + compatible = "ti,am62d2-evm", "ti,am62d2"; + model = "Texas Instruments AM62D2 EVM"; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &wkup_rtc0; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + bootph-all; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x2000000>; + alloc-ranges = <0x00 0xc0000000 0x00 0x2000000>; + linux,cma-default; + }; + + secure_tfa_ddr: tfa@80000000 { + reg = <0x00 0x80000000 0x00 0x80000>; + no-map; + }; + + c7x_0_dma_memory_region: c7x-dma-memory@99800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x99800000 0x00 0x100000>; + no-map; + }; + + c7x_0_memory_region: c7x-memory@99900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x99900000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9b800000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9b900000 0x00 0xf00000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c800000 0x00 0x100000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9c900000 0x00 0xf00000>; + no-map; + bootph-pre-ram; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x01000000>; + no-map; + }; + }; + + opp-table { + /* Requires VDD_CORE at 0v85 */ + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + clock-latency-ns = <6000000>; + }; + }; + + vout_pd: regulator-0 { + /* TPS65988 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vout_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vmain_pd: regulator-1 { + /* Output of TPS22811 */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vout_pd>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_5v0: regulator-2 { + /* Output of TPS630702RNMR */ + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_3v3_main: regulator-3 { + /* output of LM5141-Q1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_main"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_mmc1: regulator-4 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vcc_3v3_sys: regulator-5 { + /* output of TPS222965DSGT */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_main>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vddshv_sdio: regulator-6 { + compatible = "regulator-gpio"; + regulator-name = "vddshv_sdio"; + pinctrl-names = "default"; + pinctrl-0 = <&vddshv_sdio_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpios = <&main_gpio1 31 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + bootph-all; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62d-evm:green:heartbeat"; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + }; +}; + +&mcu_pmx0 { + status = "okay"; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62DX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */ + >; + }; + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM62DX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */ + AM62DX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */ + AM62DX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */ + AM62DX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */ + >; + bootph-all; + }; +}; + +/* WKUP UART0 is used for DM firmware logs */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; + status = "reserved"; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x01c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ + AM62DX_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ + >; + bootph-all; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */ + AM62DX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */ + >; + bootph-all; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C17) I2C1_SCL */ + AM62DX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (E17) I2C1_SDA */ + >; + bootph-all; + }; + + main_i2c2_pins_default: main-i2c2-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (M22) GPMC0_CSn2.I2C2_SCL */ + AM62DX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (M20) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_mmc0_pins_default: main-mmc0-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */ + AM62DX_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB7) MMC0_CLK */ + AM62DX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */ + AM62DX_IOPAD(0x0210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */ + AM62DX_IOPAD(0x020c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */ + AM62DX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */ + AM62DX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */ + AM62DX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */ + AM62DX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */ + AM62DX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */ + >; + bootph-all; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x023c, PIN_INPUT, 0) /* (C21) MMC1_CMD */ + AM62DX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (E22) MMC1_CLK */ + AM62DX_IOPAD(0x0230, PIN_INPUT, 0) /* (B22) MMC1_DAT0 */ + AM62DX_IOPAD(0x022c, PIN_INPUT, 0) /* (D21) MMC1_DAT1 */ + AM62DX_IOPAD(0x0228, PIN_INPUT, 0) /* (C22) MMC1_DAT2 */ + AM62DX_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ + AM62DX_IOPAD(0x0240, PIN_INPUT, 0) /* (E18) MMC1_SDCD */ + >; + bootph-all; + }; + + main_mdio0_pins_default: main-mdio0-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ + AM62DX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ + >; + bootph-all; + }; + + main_rgmii1_pins_default: main-rgmii1-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ + AM62DX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ + AM62DX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */ + AM62DX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */ + AM62DX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */ + AM62DX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */ + AM62DX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */ + AM62DX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */ + AM62DX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */ + AM62DX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */ + AM62DX_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */ + AM62DX_IOPAD(0x012c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */ + >; + bootph-all; + }; + + main_rgmii2_pins_default: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */ + AM62DX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */ + AM62DX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */ + AM62DX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */ + AM62DX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */ + AM62DX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */ + AM62DX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */ + AM62DX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */ + AM62DX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */ + AM62DX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */ + AM62DX_IOPAD(0x0168, PIN_OUTPUT, 0) /* (AB19) RGMII2_TXC */ + AM62DX_IOPAD(0x0164, PIN_OUTPUT, 0) /* (Y19) RGMII2_TX_CTL */ + >; + bootph-all; + }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */ + >; + }; + + vddshv_sdio_pins_default: vddshv-sdio-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x1f4, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO1_31 */ + >; + bootph-all; + }; + + usr_led_pins_default: usr-led-default-pins { + pinctrl-single,pins = < + AM62DX_IOPAD(0x0244, PIN_INPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ + >; + }; +}; + +&mcu_gpio0 { + status = "okay"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + bootph-all; + status = "okay"; + + typec_pd0: usb-power-controller@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + port { + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; + }; + }; + }; + }; + + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; + + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "","MMC1_SD_EN", + "VPP_EN", "GPIO_DIX_RST", + "IO_EXP_OPT_EN", "DIX_INT", + "GPIO_eMMC_RSTn", "CPLD2_DONE", + "CPLD2_INTN", "CPLD1_DONE", + "CPLD1_INTN", "USB_TYPEA_OC_INDICATION", + "PCM1_INT", "PCM2_INT", + "GPIO_PCM1_RST", "TEST_GPIO2", + "GPIO_PCM2_RST", "", + "IO_MCAN0_STB", "IO_MCAN1_STB", + "PD_I2C_IRQ", "IO_EXP_TEST_LED"; + }; + + exp2: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PCM6240_BUF_IO_EN", "", + "CPLD1_JTAGENB", "CPLD1_PROGRAMN", + "CPLD2_JTAGENB", "CPLD2_PROGRAMN", + "", "", + "", "CPLD1_TCK", + "CPLD1_TMS", "CPLD1_TDI", + "CPLD1_TDO", "CPLD2_TCK", + "CPLD2_TMS", "CPLD2_TDI", + "CPLD2_TDO", "ADDR1_IO_EXP", + "SoC_I2C0_SCL", "SoC_I2C0_SDA"; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; + status = "okay"; +}; + +&sdhci0 { + /* eMMC */ + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + bootph-all; + status = "okay"; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vddshv_sdio>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + disable-wp; + bootph-all; + status = "okay"; +}; + +&main_gpio0 { + bootph-all; + status = "okay"; +}; + +&main_gpio1 { + bootph-all; + status = "okay"; +}; + +&main_gpio_intr { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; + status = "okay"; +}; + +&usb0 { + usb-role-switch; + + port { + usb0_hs_ep: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>, + <&main_rgmii2_pins_default>; + status = "okay"; + + cpts@3d000 { + /* MAP HW3_TS_PUSH to GENF1 */ + ti,pps = <2 1>; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-id"; + phy-handle = <&cpsw3g_phy0>; + status = "okay"; +}; + +&cpsw_port2 { + phy-mode = "rgmii-id"; + phy-handle = <&cpsw3g_phy1>; + status = "okay"; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio0_pins_default>; + status = "okay"; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,fifo-depth = ; + ti,min-output-impedance; + }; + + cpsw3g_phy1: ethernet-phy@3 { + reg = <3>; + ti,fifo-depth = ; + ti,min-output-impedance; + }; +}; + +&mailbox0_cluster0 { + status = "okay"; + + mbox_r5_0: mbox-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster1 { + status = "okay"; + + mbox_c7x_0: mbox-c7x-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "okay"; + + mbox_mcu_r5_0: mbox-mcu-r5-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&wkup_r5fss0 { + status = "okay"; +}; + +&wkup_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_r5_0>; + memory-region = <&wkup_r5fss0_core0_dma_memory_region>, + <&wkup_r5fss0_core0_memory_region>; + bootph-pre-ram; +}; + +&mcu_r5fss0 { + status = "okay"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; + firmware-name = "am62d-mcu-r5f0_0-fw"; + status = "okay"; +}; + +&c7x_0 { + mboxes = <&mailbox0_cluster1 &mbox_c7x_0>; + memory-region = <&c7x_0_dma_memory_region>, + <&c7x_0_memory_region>; + firmware-name = "am62d-c71_0-fw"; + status = "okay"; +}; + +/* main_rti4 is used by C7x DSP */ +&main_rti4 { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62d2.dtsi b/arch/arm64/boot/dts/ti/k3-am62d2.dtsi new file mode 100644 index 000000000000..c7d8ab43c72f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62d2.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Device Tree Source for AM62D2 SoC family in Quad core configuration + * + * TRM: https://www.ti.com/lit/pdf/sprujd4 + * + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am62a7.dtsi" + +/ { + model = "Texas Instruments K3 AM62D SoC"; + compatible = "ti,am62d2"; +}; + +/delete-node/ &vpu; /* Video Codec is disabled in AM62D2 SoC */ +/delete-node/ &e5010; /* JPEG Encoder is disabled in AM62D2 SoC */ diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi index fa55c43ca28d..2e5e25a8ca86 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi @@ -259,7 +259,7 @@ secure_proxy_sa3: mailbox@43600000 { main_pmx0: pinctrl@f4000 { compatible = "pinctrl-single"; - reg = <0x00 0xf4000 0x00 0x2ac>; + reg = <0x00 0xf4000 0x00 0x2b0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi index c7486fb2a5b4..138b9c395be4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-thermal.dtsi @@ -12,12 +12,29 @@ main0_thermal: main0-thermal { thermal-sensors = <&wkup_vtm0 0>; trips { + main0_alert: main0-alert { + temperature = <115000>; + hysteresis = <2000>; + type = "passive"; + }; + main0_crit: main0-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main0_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; main1_thermal: main1-thermal { @@ -26,12 +43,29 @@ main1_thermal: main1-thermal { thermal-sensors = <&wkup_vtm0 1>; trips { + main1_alert: main1-alert { + temperature = <115000>; + hysteresis = <2000>; + type = "passive"; + }; + main1_crit: main1-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main1_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; main2_thermal: main2-thermal { @@ -40,11 +74,28 @@ main2_thermal: main2-thermal { thermal-sensors = <&wkup_vtm0 2>; trips { + main2_alert: main2-alert { + temperature = <115000>; + hysteresis = <2000>; + type = "passive"; + }; + main2_crit: main2-crit { temperature = <125000>; /* milliCelsius */ hysteresis = <2000>; /* milliCelsius */ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&main2_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi index 226398c37fa9..a2fdc6741da2 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi @@ -426,14 +426,14 @@ AM62PX_IOPAD(0x00f4, PIN_INPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 */ /* WIFI_SPI /* Verdin PWM_3_DSI as GPIO */ pinctrl_pwm3_dsi_gpio: main-gpio1-16-default-pins { pinctrl-single,pins = < - AM62PX_IOPAD(0x01b8, PIN_OUTPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */ /* SODIMM 19 */ + AM62PX_IOPAD(0x01b8, PIN_INPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */ /* SODIMM 19 */ >; }; /* Verdin SD_1_CD# */ pinctrl_sd1_cd: main-gpio1-48-default-pins { pinctrl-single,pins = < - AM62PX_IOPAD(0x0240, PIN_INPUT, 7) /* (D23) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */ + AM62PX_IOPAD(0x0240, PIN_INPUT_PULLUP, 7) /* (D23) MMC1_SDCD.GPIO1_48 */ /* SODIMM 84 */ >; }; @@ -717,8 +717,8 @@ AM62PX_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (D10) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SO /* Verdin I2C_3_HDMI */ pinctrl_mcu_i2c0: mcu-i2c0-default-pins { pinctrl-single,pins = < - AM62PX_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */ - AM62PX_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */ + AM62PX_MCU_IOPAD(0x0044, PIN_INPUT_PULLUP, 0) /* (E11) MCU_I2C0_SCL */ /* SODIMM 59 */ + AM62PX_MCU_IOPAD(0x0048, PIN_INPUT_PULLUP, 0) /* (D11) MCU_I2C0_SDA */ /* SODIMM 57 */ >; }; @@ -848,6 +848,30 @@ mbox_mcu_r5_0: mbox-mcu-r5-0 { }; }; +&main0_alert { + temperature = <95000>; +}; + +&main0_crit { + temperature = <105000>; +}; + +&main1_alert { + temperature = <95000>; +}; + +&main1_crit { + temperature = <105000>; +}; + +&main2_alert { + temperature = <95000>; +}; + +&main2_crit { + temperature = <105000>; +}; + &main_gpio0 { gpio-line-names = "SODIMM_52", diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index 83c37de7d338..899da7896563 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -214,6 +214,14 @@ sound_master: simple-audio-card,codec { }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &main_gpio0 { bootph-all; }; @@ -267,6 +275,7 @@ main_mdio1_pins_default: main-mdio1-default-pins { AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */ AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */ >; + bootph-all; }; main_mmc1_pins_default: main-mmc1-default-pins { @@ -547,6 +556,7 @@ &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; status = "okay"; + bootph-all; }; &cpsw_port2 { @@ -562,6 +572,7 @@ &cpsw3g_mdio { cpsw3g_phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi index 140587d02e88..202378d9d5cf 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi @@ -49,6 +49,7 @@ cpu0: cpu@0 { next-level-cache = <&l2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 135 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -65,6 +66,7 @@ cpu1: cpu@1 { next-level-cache = <&l2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 136 0>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -81,6 +83,7 @@ cpu2: cpu@2 { next-level-cache = <&l2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 137 0>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -97,6 +100,7 @@ cpu3: cpu@3 { next-level-cache = <&l2_0>; operating-points-v2 = <&a53_opp_table>; clocks = <&k3_clks 138 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index ee8337bfbbfd..13e1d36123d5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -203,22 +203,6 @@ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ >; }; - main_mmc0_pins_default: main-mmc0-default-pins { - bootph-all; - pinctrl-single,pins = < - AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ - AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ - AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ - AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ - AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ - AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ - AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ - AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ - AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ - AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ - >; - }; - main_mmc1_pins_default: main-mmc1-default-pins { bootph-all; pinctrl-single,pins = < @@ -457,14 +441,6 @@ &main_i2c2 { clock-frequency = <400000>; }; -&sdhci0 { - bootph-all; - status = "okay"; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; -}; - &sdhci1 { /* SD/MMC */ bootph-all; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso index 432751774853..a7e8d4ea98ac 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-pcie0-ep.dtso @@ -46,6 +46,7 @@ pcie0_ep: pcie-ep@f102000 { max-functions = /bits/ 8 <1>; phys = <&serdes0_pcie_link>; phy-names = "pcie-phy"; + bootph-all; ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index f63c101b7d61..129524eb5b91 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -322,6 +322,8 @@ AM64X_IOPAD(0x0040, PIN_OUTPUT, 7) /* (U21) GPMC0_AD1.GPIO0_16 */ &icssg0_mdio { pinctrl-names = "default"; pinctrl-0 = <&icssg0_mdio_pins_default &clkout0_pins_default>; + assigned-clocks = <&k3_clks 157 123>; + assigned-clock-parents = <&k3_clks 157 125>; status = "okay"; icssg0_phy1: ethernet-phy@1 { diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index b085e7361116..61c11dc92d9c 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -655,6 +655,7 @@ secure_proxy_main: mailbox@32c00000 { <0x00 0x32800000 0x00 0x100000>; interrupt-names = "rx_011"; interrupts = ; + bootph-all; }; hwspinlock: spinlock@30e00000 { diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index eee072e44a42..d62a0be767c8 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -21,16 +21,19 @@ dmsc: system-controller@44083000 { k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; + bootph-all; }; k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; + bootph-all; }; k3_reset: reset-controller { compatible = "ti,sci-reset"; #reset-cells = <2>; + bootph-all; }; }; @@ -43,6 +46,7 @@ wkup_conf: bus@43000000 { chipid: chipid@14 { compatible = "ti,am654-chipid"; reg = <0x14 0x4>; + bootph-all; }; }; @@ -107,5 +111,6 @@ wkup_vtm0: temperature-sensor@42050000 { reg = <0x42050000 0x25c>; power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index c30425960398..e589690c7c82 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -144,6 +144,7 @@ vtt_supply: regulator-3 { regulator-boot-on; vin-supply = <&vcc3v3_io>; gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>; + bootph-all; }; }; @@ -155,12 +156,14 @@ AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */ AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */ AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */ >; + bootph-all; }; ddr_vtt_pins_default: ddr-vtt-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */ >; + bootph-all; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { @@ -168,6 +171,7 @@ wkup_i2c0_pins_default: wkup-i2c0-default-pins { AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; + bootph-all; }; push_button_pins_default: push-button-default-pins { @@ -191,6 +195,7 @@ AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ >; + bootph-all; }; wkup_pca554_default: wkup-pca554-default-pins { @@ -206,6 +211,7 @@ AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */ AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */ AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */ >; + bootph-all; }; mcu_cpsw_pins_default: mcu-cpsw-default-pins { @@ -248,6 +254,7 @@ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ >; + bootph-all; }; main_i2c2_pins_default: main-i2c2-default-pins { @@ -281,6 +288,7 @@ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ >; + bootph-all; }; main_mmc1_pins_default: main-mmc1-default-pins { @@ -294,6 +302,7 @@ AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ >; + bootph-all; }; usb1_pins_default: usb1-default-pins { @@ -343,6 +352,7 @@ &main_uart0 { pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; + bootph-all; }; &wkup_i2c0 { @@ -368,6 +378,7 @@ vdd_mpu: regulator@60 { ti,vsel0-state-high; ti,vsel1-state-high; ti,enable-vout-discharge; + bootph-all; }; gpio@38 { @@ -456,6 +467,7 @@ &sdhci0 { bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; + bootph-all; }; /* @@ -470,6 +482,7 @@ &sdhci1 { pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; + bootph-all; }; &usb1 { @@ -630,3 +643,7 @@ &cpsw_port1 { &dss { status = "disabled"; }; + +&wkup_gpio0 { + bootph-all; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso index c3cb752f8cd7..d04dd7a44008 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso +++ b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb2.dtso @@ -46,6 +46,7 @@ AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ &dwc3_0 { status = "okay"; + bootph-all; }; &usb0_phy { diff --git a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso index 333e423e8bb6..04393f21d712 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso +++ b/arch/arm64/boot/dts/ti/k3-am654-pcie-usb3.dtso @@ -45,6 +45,7 @@ &dwc3_0 { <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ phys = <&serdes0 PHY_TYPE_USB3 0>; phy-names = "usb3-phy"; + bootph-all; }; &usb0 { diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 5fa70a874d7b..e84c504c87d2 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -344,6 +344,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ >; + bootph-all; }; mcu_mdio_pins_default: mcu-mdio-default-pins { @@ -351,6 +352,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins { J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ >; + bootph-all; }; mcu_mcan0_pins_default: mcu-mcan0-default-pins { @@ -412,6 +414,14 @@ J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */ }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &main_gpio0 { status = "okay"; pinctrl-names = "default"; @@ -626,6 +636,7 @@ &mcu_cpsw { &davinci_mdio { phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; @@ -635,6 +646,7 @@ phy0: ethernet-phy@0 { &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; + bootph-all; }; &mcu_mcan0 { diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index f28375629739..612ac27643d2 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -568,6 +568,7 @@ J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ >; + bootph-all; }; mcu_mdio_pins_default: mcu-mdio-default-pins { @@ -575,6 +576,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins { J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ >; + bootph-all; }; mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins { @@ -630,6 +632,14 @@ J784S4_WKUP_IOPAD(0x0, PIN_INPUT, 7) /* (M33) WKUP_GPIO0_49 */ }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &mailbox0_cluster0 { status = "okay"; interrupts = <436>; @@ -968,6 +978,7 @@ &mcu_cpsw { &davinci_mdio { mcu_phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; @@ -978,6 +989,7 @@ &mcu_cpsw_port1 { status = "okay"; phy-mode = "rgmii-rxid"; phy-handle = <&mcu_phy0>; + bootph-all; }; &mcu_r5fss0_core0 { @@ -1294,8 +1306,12 @@ partition@3fc0000 { &serdes_ln_ctrl { idle-states = , , , , - , , - , ; + , , + , , + , , + , , + , , + , ; }; &serdes_wiz0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 83cf0adb2cb7..62f45377a2c9 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -2067,4 +2067,94 @@ gpu: gpu@4e20000000 { power-domain-names = "a", "b"; dma-coherent; }; + + mcasp0: mcasp@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b00000 0x00 0x2000>, + <0x00 0x02b08000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 209 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 209 0>; + assigned-clock-parents = <&k3_clks 209 1>; + power-domains = <&k3_pds 209 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp1: mcasp@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b10000 0x00 0x2000>, + <0x00 0x02b18000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 210 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 210 0>; + assigned-clock-parents = <&k3_clks 210 1>; + power-domains = <&k3_pds 210 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp2: mcasp@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b20000 0x00 0x2000>, + <0x00 0x02b28000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 211 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 211 0>; + assigned-clock-parents = <&k3_clks 211 1>; + power-domains = <&k3_pds 211 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp3: mcasp@2b30000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b30000 0x00 0x2000>, + <0x00 0x02b38000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 212 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 212 0>; + assigned-clock-parents = <&k3_clks 212 1>; + power-domains = <&k3_pds 212 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp4: mcasp@2b40000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b40000 0x00 0x2000>, + <0x00 0x02b48000 0x00 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>; + dma-names = "tx", "rx"; + clocks = <&k3_clks 213 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 213 0>; + assigned-clock-parents = <&k3_clks 213 1>; + power-domains = <&k3_pds 213 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index a47852fdca70..9d8abfa9afd2 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -282,6 +282,14 @@ csi23_mux: mux-controller-1 { }; }; +&cpsw_mac_syscon { + bootph-all; +}; + +&phy_gmii_sel { + bootph-all; +}; + &main_pmx0 { main_mcan0_pins_default: main-mcan0-default-pins { @@ -346,6 +354,7 @@ mdio_pins_default: mdio-default-pins { J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ >; + bootph-all; }; ospi0_pins_default: ospi0-default-pins { @@ -380,6 +389,7 @@ J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ >; + bootph-all; }; main_usb1_pins_default: main-usb1-default-pins { @@ -424,6 +434,7 @@ &cpsw3g_mdio { cpsw3g_phy0: ethernet-phy@0 { reg = <0>; + bootph-all; ti,rx-internal-delay = ; ti,fifo-depth = ; ti,min-output-impedance; @@ -434,6 +445,7 @@ &cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy0>; status = "okay"; + bootph-all; }; &main_gpio1 { @@ -634,7 +646,7 @@ p05-hog { /* P05 - USB2.0_MUX_SEL */ gpio-hog; gpios = <5 GPIO_ACTIVE_LOW>; - output-high; + output-low; }; p01_hog: p01-hog { diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi index 78d7e800b311..5cfa7bf36641 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi @@ -418,6 +418,15 @@ serdes_ln_ctrl: mux-controller@4080 { <0x10 0x3>; /* SERDES1 lane0 select */ }; + audio_refclk0: clock@82e0 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e0 0x4>; + clocks = <&k3_clks 157 0>; + assigned-clocks = <&k3_clks 157 0>; + assigned-clock-parents = <&k3_clks 157 15>; + #clock-cells = <0>; + }; + audio_refclk1: clock@82e4 { compatible = "ti,am62-audio-refclk"; reg = <0x82e4 0x4>; diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi index 14c6c6a332ef..cdc8570e54b2 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi @@ -56,6 +56,7 @@ cpu0: cpu@0 { d-cache-sets = <128>; next-level-cache = <&l2_0>; clocks = <&k3_clks 135 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -71,6 +72,7 @@ cpu1: cpu@1 { d-cache-sets = <128>; next-level-cache = <&l2_0>; clocks = <&k3_clks 136 0>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -86,6 +88,7 @@ cpu2: cpu@2 { d-cache-sets = <128>; next-level-cache = <&l2_0>; clocks = <&k3_clks 137 0>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -101,6 +104,7 @@ cpu3: cpu@3 { d-cache-sets = <128>; next-level-cache = <&l2_0>; clocks = <&k3_clks 138 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi index 363d68fec387..7c5b0c69897d 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi @@ -131,6 +131,11 @@ acspcie0_proxy_ctrl: clock-controller@1a090 { compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon"; reg = <0x1a090 0x4>; }; + + acspcie1_proxy_ctrl: clock-controller@1a094 { + compatible = "ti,j784s4-acspcie-proxy-ctrl", "syscon"; + reg = <0x1a094 0x4>; + }; }; main_ehrpwm0: pwm@3000000 { @@ -2675,4 +2680,15 @@ mcasp4: mcasp@2b40000 { power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + bist_main14: bist@33c0000 { + compatible = "ti,j784s4-bist"; + reg = <0x00 0x033c0000 0x00 0x400>, + <0x00 0x0010c1a0 0x00 0x01c>; + reg-names = "cfg", "ctrl_mmr"; + clocks = <&k3_clks 237 7>; + power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>; + bootph-pre-ram; + ti,sci-dev-id = <234>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h index cac7cccc1112..c0f09be8d3f9 100644 --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -8,6 +8,7 @@ #ifndef DTS_ARM64_TI_K3_PINCTRL_H #define DTS_ARM64_TI_K3_PINCTRL_H +#define ST_EN_SHIFT (14) #define PULLUDEN_SHIFT (16) #define PULLTYPESEL_SHIFT (17) #define RXACTIVE_SHIFT (18) @@ -19,6 +20,10 @@ #define DS_PULLUD_EN_SHIFT (27) #define DS_PULLTYPE_SEL_SHIFT (28) +/* Schmitt trigger configuration */ +#define ST_DISABLE (0 << ST_EN_SHIFT) +#define ST_ENABLE (1 << ST_EN_SHIFT) + #define PULL_DISABLE (1 << PULLUDEN_SHIFT) #define PULL_ENABLE (0 << PULLUDEN_SHIFT) @@ -32,9 +37,13 @@ #define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE) #define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP) #define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN) -#define PIN_INPUT (INPUT_EN | PULL_DISABLE) -#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) +#define PIN_INPUT (INPUT_EN | ST_ENABLE | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | ST_ENABLE | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN | ST_ENABLE | PULL_DOWN) +/* Input configurations with Schmitt Trigger disabled */ +#define PIN_INPUT_NOST (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP_NOST (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN_NOST (INPUT_EN | PULL_DOWN) #define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT) @@ -63,6 +72,9 @@ #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62DX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62DX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + #define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 03117405b6ce..91c9bf4b2ef0 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -581,6 +581,7 @@ CONFIG_SPI_QUP=y CONFIG_SPI_QCOM_GENI=m CONFIG_SPI_S3C64XX=y CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_STM32_OSPI=m CONFIG_SPI_SUN6I=y CONFIG_SPI_TEGRA210_QUAD=m CONFIG_SPI_TEGRA114=m @@ -783,6 +784,7 @@ CONFIG_MFD_TPS65219=y CONFIG_MFD_TPS6594_I2C=m CONFIG_MFD_ROHM_BD718XX=y CONFIG_MFD_STM32_LPTIMER=m +CONFIG_MFD_STM32_TIMERS=m CONFIG_MFD_WCD934X=m CONFIG_MFD_KHADAS_MCU=m CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -1520,6 +1522,7 @@ CONFIG_EXTCON_USB_GPIO=y CONFIG_EXTCON_USBC_CROS_EC=y CONFIG_FSL_IFC=y CONFIG_RENESAS_RPCIF=m +CONFIG_STM32_OMM=m CONFIG_IIO=y CONFIG_EXYNOS_ADC=y CONFIG_IMX8QXP_ADC=m @@ -1540,6 +1543,7 @@ CONFIG_IIO_CROS_EC_LIGHT_PROX=m CONFIG_SENSORS_ISL29018=m CONFIG_VCNL4000=m CONFIG_IIO_ST_MAGN_3AXIS=m +CONFIG_IIO_STM32_TIMER_TRIGGER=m CONFIG_IIO_CROS_EC_BARO=m CONFIG_MPL3115=m CONFIG_PWM=y @@ -1558,6 +1562,7 @@ CONFIG_PWM_RENESAS_TPU=m CONFIG_PWM_ROCKCHIP=y CONFIG_PWM_SAMSUNG=y CONFIG_PWM_SL28CPLD=m +CONFIG_PWM_STM32=m CONFIG_PWM_SUN4I=m CONFIG_PWM_TEGRA=m CONFIG_PWM_TIECAP=m @@ -1704,6 +1709,7 @@ CONFIG_INTERCONNECT_QCOM_X1E80100=y CONFIG_COUNTER=m CONFIG_TI_EQEP=m CONFIG_RZ_MTU3_CNT=m +CONFIG_STM32_TIMER_CNT=m CONFIG_HTE=y CONFIG_HTE_TEGRA194=y CONFIG_HTE_TEGRA194_TEST=m diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile index 85966306801e..6f65526d4193 100644 --- a/arch/riscv/boot/dts/sophgo/Makefile +++ b/arch/riscv/boot/dts/sophgo/Makefile @@ -3,4 +3,6 @@ dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb dtb-$(CONFIG_ARCH_SOPHGO) += sg2002-licheerv-nano-b.dtb dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb +dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-evb-v1.dtb +dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-evb-v2.dtb dtb-$(CONFIG_ARCH_SOPHGO) += sg2044-sophgo-srd3-10.dtb diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi index ed06c3609fb2..ccdb45498653 100644 --- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include "cv18xx-reset.h" / { #address-cells = <1>; @@ -24,11 +25,45 @@ soc { #size-cells = <1>; ranges; + rst: reset-controller@3003000 { + compatible = "sophgo,cv1800b-reset"; + reg = <0x3003000 0x1000>; + #reset-cells = <1>; + }; + + mdio: mdio-mux@3009800 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x3009800 0x4>; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&gmac0_mdio>; + mux-mask = <0x80>; + status = "disabled"; + + internal_mdio: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + internal_ephy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + + external_mdio: mdio@80 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80>; + }; + }; + gpio0: gpio@3020000 { compatible = "snps,dw-apb-gpio"; reg = <0x3020000 0x1000>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst RST_GPIO0>; porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -47,6 +82,7 @@ gpio1: gpio@3021000 { reg = <0x3021000 0x1000>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst RST_GPIO1>; portb: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -65,6 +101,7 @@ gpio2: gpio@3022000 { reg = <0x3022000 0x1000>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst RST_GPIO2>; portc: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -83,6 +120,7 @@ gpio3: gpio@3023000 { reg = <0x3023000 0x1000>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst RST_GPIO3>; portd: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -126,6 +164,7 @@ i2c0: i2c@4000000 { clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>; clock-names = "ref", "pclk"; interrupts = ; + resets = <&rst RST_I2C0>; status = "disabled"; }; @@ -137,6 +176,7 @@ i2c1: i2c@4010000 { clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>; clock-names = "ref", "pclk"; interrupts = ; + resets = <&rst RST_I2C1>; status = "disabled"; }; @@ -148,6 +188,7 @@ i2c2: i2c@4020000 { clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>; clock-names = "ref", "pclk"; interrupts = ; + resets = <&rst RST_I2C2>; status = "disabled"; }; @@ -159,6 +200,7 @@ i2c3: i2c@4030000 { clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>; clock-names = "ref", "pclk"; interrupts = ; + resets = <&rst RST_I2C3>; status = "disabled"; }; @@ -170,9 +212,56 @@ i2c4: i2c@4040000 { clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>; clock-names = "ref", "pclk"; interrupts = ; + resets = <&rst RST_I2C4>; status = "disabled"; }; + gmac0: ethernet@4070000 { + compatible = "sophgo,cv1800b-dwmac", "snps,dwmac-3.70a"; + reg = <0x04070000 0x10000>; + clocks = <&clk CLK_AXI4_ETH0>, <&clk CLK_ETH0_500M>; + clock-names = "stmmaceth", "ptp_ref"; + interrupts = ; + interrupt-names = "macirq"; + phy-handle = <&internal_ephy>; + phy-mode = "internal"; + resets = <&rst RST_ETH0>; + reset-names = "stmmaceth"; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,multicast-filter-bins = <0>; + snps,perfect-filter-entries = <1>; + snps,aal; + snps,txpbl = <8>; + snps,rxpbl = <8>; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + status = "disabled"; + + gmac0_mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <16 8 4 0 0 0 0>; + snps,rd_osr_lmt = <2>; + snps,wr_osr_lmt = <1>; + }; + }; + uart0: serial@4140000 { compatible = "snps,dw-apb-uart"; reg = <0x04140000 0x100>; @@ -181,6 +270,7 @@ uart0: serial@4140000 { clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst RST_UART0>; status = "disabled"; }; @@ -192,6 +282,7 @@ uart1: serial@4150000 { clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst RST_UART1>; status = "disabled"; }; @@ -203,6 +294,7 @@ uart2: serial@4160000 { clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst RST_UART2>; status = "disabled"; }; @@ -214,6 +306,7 @@ uart3: serial@4170000 { clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst RST_UART3>; status = "disabled"; }; @@ -225,6 +318,7 @@ spi0: spi@4180000 { clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>; clock-names = "ssi_clk", "pclk"; interrupts = ; + resets = <&rst RST_SPI0>; status = "disabled"; }; @@ -236,6 +330,7 @@ spi1: spi@4190000 { clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>; clock-names = "ssi_clk", "pclk"; interrupts = ; + resets = <&rst RST_SPI1>; status = "disabled"; }; @@ -247,6 +342,7 @@ spi2: spi@41a0000 { clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>; clock-names = "ssi_clk", "pclk"; interrupts = ; + resets = <&rst RST_SPI2>; status = "disabled"; }; @@ -258,6 +354,7 @@ spi3: spi@41b0000 { clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>; clock-names = "ssi_clk", "pclk"; interrupts = ; + resets = <&rst RST_SPI3>; status = "disabled"; }; @@ -269,6 +366,7 @@ uart4: serial@41c0000 { clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst RST_UART4>; status = "disabled"; }; @@ -307,5 +405,17 @@ dmac: dma-controller@4330000 { snps,data-width = <2>; status = "disabled"; }; + + rtc@5025000 { + compatible = "sophgo,cv1800b-rtc", "syscon"; + reg = <0x5025000 0x2000>; + interrupts = , + , + ; + interrupt-names = "alarm", "longpress", "vbat"; + clocks = <&clk CLK_RTC_25M>, + <&clk CLK_SRC_RTC_SYS_0>; + clock-names = "rtc", "mcu"; + }; }; }; diff --git a/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts index 26b57e15adc1..4a5835fa9e96 100644 --- a/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts +++ b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts @@ -55,6 +55,14 @@ &emmc { non-removable; }; +&gmac0 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + &sdhci0 { status = "okay"; bus-width = <4>; diff --git a/arch/riscv/boot/dts/sophgo/cv18xx-reset.h b/arch/riscv/boot/dts/sophgo/cv18xx-reset.h new file mode 100644 index 000000000000..7e7c5ca2dbbd --- /dev/null +++ b/arch/riscv/boot/dts/sophgo/cv18xx-reset.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright (C) 2025 Inochi Amaoto + */ + +#ifndef _SOPHGO_CV18XX_RESET +#define _SOPHGO_CV18XX_RESET + +#define RST_DDR 2 +#define RST_H264C 3 +#define RST_JPEG 4 +#define RST_H265C 5 +#define RST_VIPSYS 6 +#define RST_TDMA 7 +#define RST_TPU 8 +#define RST_TPUSYS 9 +#define RST_USB 11 +#define RST_ETH0 12 +#define RST_ETH1 13 +#define RST_NAND 14 +#define RST_EMMC 15 +#define RST_SD0 16 +#define RST_SDMA 18 +#define RST_I2S0 19 +#define RST_I2S1 20 +#define RST_I2S2 21 +#define RST_I2S3 22 +#define RST_UART0 23 +#define RST_UART1 24 +#define RST_UART2 25 +#define RST_UART3 26 +#define RST_I2C0 27 +#define RST_I2C1 28 +#define RST_I2C2 29 +#define RST_I2C3 30 +#define RST_I2C4 31 +#define RST_PWM0 32 +#define RST_PWM1 33 +#define RST_PWM2 34 +#define RST_PWM3 35 +#define RST_SPI0 40 +#define RST_SPI1 41 +#define RST_SPI2 42 +#define RST_SPI3 43 +#define RST_GPIO0 44 +#define RST_GPIO1 45 +#define RST_GPIO2 46 +#define RST_EFUSE 47 +#define RST_WDT 48 +#define RST_AHB_ROM 49 +#define RST_SPIC 50 +#define RST_TEMPSEN 51 +#define RST_SARADC 52 +#define RST_COMBO_PHY0 58 +#define RST_SPI_NAND 61 +#define RST_SE 62 +#define RST_UART4 74 +#define RST_GPIO3 75 +#define RST_SYSTEM 76 +#define RST_TIMER 77 +#define RST_TIMER0 78 +#define RST_TIMER1 79 +#define RST_TIMER2 80 +#define RST_TIMER3 81 +#define RST_TIMER4 82 +#define RST_TIMER5 83 +#define RST_TIMER6 84 +#define RST_TIMER7 85 +#define RST_WGN0 86 +#define RST_WGN1 87 +#define RST_WGN2 88 +#define RST_KEYSCAN 89 +#define RST_AUDDAC 91 +#define RST_AUDDAC_APB 92 +#define RST_AUDADC 93 +#define RST_VCSYS 95 +#define RST_ETHPHY 96 +#define RST_ETHPHY_APB 97 +#define RST_AUDSRC 98 +#define RST_VIP_CAM0 99 +#define RST_WDT1 100 +#define RST_WDT2 101 +#define RST_AUTOCLEAR_CPUCORE0 256 +#define RST_AUTOCLEAR_CPUCORE1 257 +#define RST_AUTOCLEAR_CPUCORE2 258 +#define RST_AUTOCLEAR_CPUCORE3 259 +#define RST_AUTOCLEAR_CPUSYS0 260 +#define RST_AUTOCLEAR_CPUSYS1 261 +#define RST_AUTOCLEAR_CPUSYS2 262 +#define RST_CPUCORE0 288 +#define RST_CPUCORE1 289 +#define RST_CPUCORE2 290 +#define RST_CPUCORE3 291 +#define RST_CPUSYS0 292 +#define RST_CPUSYS1 293 +#define RST_CPUSYS2 294 + +#endif /* _SOPHGO_CV18XX_RESET */ diff --git a/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi b/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi index b136b6c4128c..77ded5304272 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi @@ -259,8 +259,10 @@ cpu0: cpu@0 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <0>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -284,8 +286,10 @@ cpu1: cpu@1 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <1>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -309,8 +313,10 @@ cpu2: cpu@2 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <2>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -334,8 +340,10 @@ cpu3: cpu@3 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <3>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -359,8 +367,10 @@ cpu4: cpu@4 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <4>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -384,8 +394,10 @@ cpu5: cpu@5 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <5>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -409,8 +421,10 @@ cpu6: cpu@6 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <6>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -434,8 +448,10 @@ cpu7: cpu@7 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <7>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -459,8 +475,10 @@ cpu8: cpu@8 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <8>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -484,8 +502,10 @@ cpu9: cpu@9 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <9>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -509,8 +529,10 @@ cpu10: cpu@10 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <10>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -534,8 +556,10 @@ cpu11: cpu@11 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <11>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -559,8 +583,10 @@ cpu12: cpu@12 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <12>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -584,8 +610,10 @@ cpu13: cpu@13 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <13>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -609,8 +637,10 @@ cpu14: cpu@14 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <14>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -634,8 +664,10 @@ cpu15: cpu@15 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <15>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -659,8 +691,10 @@ cpu16: cpu@16 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <16>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -684,8 +718,10 @@ cpu17: cpu@17 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <17>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -709,8 +745,10 @@ cpu18: cpu@18 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <18>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -734,8 +772,10 @@ cpu19: cpu@19 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <19>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -759,8 +799,10 @@ cpu20: cpu@20 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <20>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -784,8 +826,10 @@ cpu21: cpu@21 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <21>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -809,8 +853,10 @@ cpu22: cpu@22 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <22>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -834,8 +880,10 @@ cpu23: cpu@23 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <23>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -859,8 +907,10 @@ cpu24: cpu@24 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <24>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -884,8 +934,10 @@ cpu25: cpu@25 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <25>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -909,8 +961,10 @@ cpu26: cpu@26 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <26>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -934,8 +988,10 @@ cpu27: cpu@27 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <27>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -959,8 +1015,10 @@ cpu28: cpu@28 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <28>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -984,8 +1042,10 @@ cpu29: cpu@29 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <29>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1009,8 +1069,10 @@ cpu30: cpu@30 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <30>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1034,8 +1096,10 @@ cpu31: cpu@31 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <31>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1059,8 +1123,10 @@ cpu32: cpu@32 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <32>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1084,8 +1150,10 @@ cpu33: cpu@33 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <33>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1109,8 +1177,10 @@ cpu34: cpu@34 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <34>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1134,8 +1204,10 @@ cpu35: cpu@35 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <35>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1159,8 +1231,10 @@ cpu36: cpu@36 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <36>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1184,8 +1258,10 @@ cpu37: cpu@37 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <37>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1209,8 +1285,10 @@ cpu38: cpu@38 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <38>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1234,8 +1312,10 @@ cpu39: cpu@39 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <39>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1259,8 +1339,10 @@ cpu40: cpu@40 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <40>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1284,8 +1366,10 @@ cpu41: cpu@41 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <41>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1309,8 +1393,10 @@ cpu42: cpu@42 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <42>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1334,8 +1420,10 @@ cpu43: cpu@43 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <43>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1359,8 +1447,10 @@ cpu44: cpu@44 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <44>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1384,8 +1474,10 @@ cpu45: cpu@45 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <45>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1409,8 +1501,10 @@ cpu46: cpu@46 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <46>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1434,8 +1528,10 @@ cpu47: cpu@47 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <47>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1459,8 +1555,10 @@ cpu48: cpu@48 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <48>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1484,8 +1582,10 @@ cpu49: cpu@49 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <49>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1509,8 +1609,10 @@ cpu50: cpu@50 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <50>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1534,8 +1636,10 @@ cpu51: cpu@51 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <51>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1559,8 +1663,10 @@ cpu52: cpu@52 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <52>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1584,8 +1690,10 @@ cpu53: cpu@53 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <53>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1609,8 +1717,10 @@ cpu54: cpu@54 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <54>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1634,8 +1744,10 @@ cpu55: cpu@55 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <55>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1659,8 +1771,10 @@ cpu56: cpu@56 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <56>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1684,8 +1798,10 @@ cpu57: cpu@57 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <57>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1709,8 +1825,10 @@ cpu58: cpu@58 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <58>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1734,8 +1852,10 @@ cpu59: cpu@59 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <59>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1759,8 +1879,10 @@ cpu60: cpu@60 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <60>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1784,8 +1906,10 @@ cpu61: cpu@61 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <61>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1809,8 +1933,10 @@ cpu62: cpu@62 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <62>; i-cache-block-size = <64>; i-cache-size = <65536>; @@ -1834,8 +1960,10 @@ cpu63: cpu@63 { riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", - "zicntr", "zicsr", "zifencei", - "zihpm"; + "ziccrse", "zicntr", "zicsr", + "zifencei", "zihpm", "zfh", + "xtheadvector"; + thead,vlenb = <16>; reg = <63>; i-cache-block-size = <64>; i-cache-size = <65536>; diff --git a/arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts b/arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts new file mode 100644 index 000000000000..3320bc1dd2c6 --- /dev/null +++ b/arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 Sophgo Technology Inc. All rights reserved. + */ + +#include "sg2042.dtsi" + +#include +#include + +/ { + model = "Sophgo SG2042 EVB V1.X"; + compatible = "sophgo,sg2042-evb-v1", "sophgo,sg2042"; + + chosen { + stdout-path = "serial0"; + }; + + gpio-power { + compatible = "gpio-keys"; + + key-power { + label = "Power Key"; + linux,code = ; + gpios = <&port0a 22 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + debounce-interval = <100>; + }; + }; + + pwmfan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <103 128 179 230 255>; + pwms = <&pwm 0 40000 0>; + #cooling-cells = <2>; + }; + + thermal-zones { + soc-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + thermal-sensors = <&mcu 0>; + + trips { + soc_active1: soc-active1 { + temperature = <30000>; + hysteresis = <8000>; + type = "active"; + }; + + soc_active2: soc-active2 { + temperature = <58000>; + hysteresis = <12000>; + type = "active"; + }; + + soc_active3: soc-active3 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + + soc_hot: soc-hot { + temperature = <80000>; + hysteresis = <5000>; + type = "hot"; + }; + }; + + cooling-maps { + map0 { + trip = <&soc_active1>; + cooling-device = <&pwmfan 0 1>; + }; + + map1 { + trip = <&soc_active2>; + cooling-device = <&pwmfan 1 2>; + }; + + map2 { + trip = <&soc_active3>; + cooling-device = <&pwmfan 2 3>; + }; + + map3 { + trip = <&soc_hot>; + cooling-device = <&pwmfan 3 4>; + }; + }; + }; + + board-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + thermal-sensors = <&mcu 1>; + + trips { + board_active: board-active { + temperature = <75000>; + hysteresis = <8000>; + type = "active"; + }; + }; + + cooling-maps { + map4 { + trip = <&board_active>; + cooling-device = <&pwmfan 3 4>; + }; + }; + }; + }; +}; + +&cgi_main { + clock-frequency = <25000000>; +}; + +&cgi_dpll0 { + clock-frequency = <25000000>; +}; + +&cgi_dpll1 { + clock-frequency = <25000000>; +}; + +&emmc { + pinctrl-0 = <&emmc_cfg>; + pinctrl-names = "default"; + bus-width = <4>; + no-sdio; + no-sd; + non-removable; + wp-inverted; + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_cfg>; + pinctrl-names = "default"; + status = "okay"; + + mcu: syscon@17 { + compatible = "sophgo,sg2042-hwmon-mcu"; + reg = <0x17>; + #thermal-sensor-cells = <1>; + }; +}; + +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&port0a 27 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + }; + }; +}; + +&pinctrl { + emmc_cfg: sdhci-emmc-cfg { + sdhci-emmc-wp-pins { + pinmux = ; + bias-disable; + drive-strength-microamp = <26800>; + input-schmitt-disable; + }; + + sdhci-emmc-cd-pins { + pinmux = ; + bias-pull-up; + drive-strength-microamp = <26800>; + input-schmitt-enable; + }; + + sdhci-emmc-rst-pwr-pins { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <26800>; + input-schmitt-disable; + }; + }; + + i2c1_cfg: i2c1-cfg { + i2c1-pins { + pinmux = , + ; + bias-pull-up; + drive-strength-microamp = <26800>; + input-schmitt-enable; + }; + }; + + sd_cfg: sdhci-sd-cfg { + sdhci-sd-cd-wp-pins { + pinmux = , + ; + bias-pull-up; + drive-strength-microamp = <26800>; + input-schmitt-enable; + }; + + sdhci-sd-rst-pwr-pins { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <26800>; + input-schmitt-disable; + }; + }; + + uart0_cfg: uart0-cfg { + uart0-rx-pins { + pinmux = , + ; + bias-pull-up; + drive-strength-microamp = <26800>; + input-schmitt-enable; + }; + }; +}; + +&sd { + pinctrl-0 = <&sd_cfg>; + pinctrl-names = "default"; + bus-width = <4>; + no-sdio; + no-mmc; + wp-inverted; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_cfg>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts b/arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts new file mode 100644 index 000000000000..46980e41b886 --- /dev/null +++ b/arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2025 Sophgo Technology Inc. All rights reserved. + */ + +#include "sg2042.dtsi" + +#include +#include + +/ { + model = "Sophgo SG2042 EVB V2.0"; + compatible = "sophgo,sg2042-evb-v2", "sophgo,sg2042"; + + chosen { + stdout-path = "serial0"; + }; + + pwmfan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <103 128 179 230 255>; + pwms = <&pwm 0 40000 0>; + #cooling-cells = <2>; + }; + + thermal-zones { + soc-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + thermal-sensors = <&mcu 0>; + + trips { + soc_active1: soc-active1 { + temperature = <30000>; + hysteresis = <8000>; + type = "active"; + }; + + soc_active2: soc-active2 { + temperature = <58000>; + hysteresis = <12000>; + type = "active"; + }; + + soc_active3: soc-active3 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + + soc_hot: soc-hot { + temperature = <80000>; + hysteresis = <5000>; + type = "hot"; + }; + }; + + cooling-maps { + map0 { + trip = <&soc_active1>; + cooling-device = <&pwmfan 0 1>; + }; + + map1 { + trip = <&soc_active2>; + cooling-device = <&pwmfan 1 2>; + }; + + map2 { + trip = <&soc_active3>; + cooling-device = <&pwmfan 2 3>; + }; + + map3 { + trip = <&soc_hot>; + cooling-device = <&pwmfan 3 4>; + }; + }; + }; + + board-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + thermal-sensors = <&mcu 1>; + + trips { + board_active: board-active { + temperature = <75000>; + hysteresis = <8000>; + type = "active"; + }; + }; + + cooling-maps { + map4 { + trip = <&board_active>; + cooling-device = <&pwmfan 3 4>; + }; + }; + }; + }; +}; + +&cgi_main { + clock-frequency = <25000000>; +}; + +&cgi_dpll0 { + clock-frequency = <25000000>; +}; + +&cgi_dpll1 { + clock-frequency = <25000000>; +}; + +&emmc { + pinctrl-0 = <&emmc_cfg>; + pinctrl-names = "default"; + bus-width = <4>; + no-sdio; + no-sd; + non-removable; + wp-inverted; + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_cfg>; + pinctrl-names = "default"; + status = "okay"; + + mcu: syscon@17 { + compatible = "sophgo,sg2042-hwmon-mcu"; + reg = <0x17>; + #thermal-sensor-cells = <1>; + }; +}; + +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&port0a 27 GPIO_ACTIVE_LOW>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + }; + }; +}; + +&pinctrl { + emmc_cfg: sdhci-emmc-cfg { + sdhci-emmc-wp-pins { + pinmux = ; + bias-disable; + drive-strength-microamp = <26800>; + input-schmitt-disable; + }; + + sdhci-emmc-cd-pins { + pinmux = ; + bias-pull-up; + drive-strength-microamp = <26800>; + input-schmitt-enable; + }; + + sdhci-emmc-rst-pwr-pins { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <26800>; + input-schmitt-disable; + }; + }; + + i2c1_cfg: i2c1-cfg { + i2c1-pins { + pinmux = , + ; + bias-pull-up; + drive-strength-microamp = <26800>; + input-schmitt-enable; + }; + }; + + sd_cfg: sdhci-sd-cfg { + sdhci-sd-cd-wp-pins { + pinmux = , + ; + bias-pull-up; + drive-strength-microamp = <26800>; + input-schmitt-enable; + }; + + sdhci-sd-rst-pwr-pins { + pinmux = , + ; + bias-disable; + drive-strength-microamp = <26800>; + input-schmitt-disable; + }; + }; + + uart0_cfg: uart0-cfg { + uart0-rx-pins { + pinmux = , + ; + bias-pull-up; + drive-strength-microamp = <26800>; + input-schmitt-enable; + }; + }; +}; + +&sd { + pinctrl-0 = <&sd_cfg>; + pinctrl-names = "default"; + bus-width = <4>; + no-sdio; + no-mmc; + wp-inverted; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_cfg>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi index 85636d1798f1..b3e4d3c18fdc 100644 --- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi @@ -569,6 +569,67 @@ spi1: spi@7040005000 { status = "disabled"; }; + gmac0: ethernet@7040026000 { + compatible = "sophgo,sg2042-dwmac", "snps,dwmac-5.00a"; + reg = <0x70 0x40026000 0x0 0x4000>; + clocks = <&clkgen GATE_CLK_AXI_ETH0>, + <&clkgen GATE_CLK_PTP_REF_I_ETH0>, + <&clkgen GATE_CLK_TX_ETH0>; + clock-names = "stmmaceth", "ptp_ref", "tx"; + dma-noncoherent; + interrupt-parent = <&intc>; + interrupts = <132 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&rstgen RST_ETH0>; + reset-names = "stmmaceth"; + snps,multicast-filter-bins = <0>; + snps,perfect-filter-entries = <1>; + snps,aal; + snps,tso; + snps,txpbl = <32>; + snps,rxpbl = <32>; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + status = "disabled"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <8>; + queue0 {}; + queue1 {}; + queue2 {}; + queue3 {}; + queue4 {}; + queue5 {}; + queue6 {}; + queue7 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <8>; + queue0 {}; + queue1 {}; + queue2 {}; + queue3 {}; + queue4 {}; + queue5 {}; + queue6 {}; + queue7 {}; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <16 8 4 0 0 0 0>; + snps,wr_osr_lmt = <1>; + snps,rd_osr_lmt = <2>; + }; + }; + emmc: mmc@704002a000 { compatible = "sophgo,sg2042-dwcmshc"; reg = <0x70 0x4002a000 0x0 0x1000>; diff --git a/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi b/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi index 2a4267078ce6..523799a1a8b8 100644 --- a/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi @@ -32,12 +32,13 @@ cpu0: cpu@0 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu0_intc: interrupt-controller { @@ -67,12 +68,13 @@ cpu1: cpu@1 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu1_intc: interrupt-controller { @@ -102,12 +104,13 @@ cpu2: cpu@2 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu2_intc: interrupt-controller { @@ -137,12 +140,13 @@ cpu3: cpu@3 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu3_intc: interrupt-controller { @@ -172,12 +176,13 @@ cpu4: cpu@4 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu4_intc: interrupt-controller { @@ -207,12 +212,13 @@ cpu5: cpu@5 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu5_intc: interrupt-controller { @@ -242,12 +248,13 @@ cpu6: cpu@6 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu6_intc: interrupt-controller { @@ -277,12 +284,13 @@ cpu7: cpu@7 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu7_intc: interrupt-controller { @@ -312,12 +320,13 @@ cpu8: cpu@8 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu8_intc: interrupt-controller { @@ -347,12 +356,13 @@ cpu9: cpu@9 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu9_intc: interrupt-controller { @@ -382,12 +392,13 @@ cpu10: cpu@10 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu10_intc: interrupt-controller { @@ -417,12 +428,13 @@ cpu11: cpu@11 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu11_intc: interrupt-controller { @@ -452,12 +464,13 @@ cpu12: cpu@12 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu12_intc: interrupt-controller { @@ -487,12 +500,13 @@ cpu13: cpu@13 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu13_intc: interrupt-controller { @@ -522,12 +536,13 @@ cpu14: cpu@14 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu14_intc: interrupt-controller { @@ -557,12 +572,13 @@ cpu15: cpu@15 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu15_intc: interrupt-controller { @@ -592,12 +608,13 @@ cpu16: cpu@16 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu16_intc: interrupt-controller { @@ -627,12 +644,13 @@ cpu17: cpu@17 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu17_intc: interrupt-controller { @@ -662,12 +680,13 @@ cpu18: cpu@18 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu18_intc: interrupt-controller { @@ -697,12 +716,13 @@ cpu19: cpu@19 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu19_intc: interrupt-controller { @@ -732,12 +752,13 @@ cpu20: cpu@20 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu20_intc: interrupt-controller { @@ -767,12 +788,13 @@ cpu21: cpu@21 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu21_intc: interrupt-controller { @@ -802,12 +824,13 @@ cpu22: cpu@22 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu22_intc: interrupt-controller { @@ -837,12 +860,13 @@ cpu23: cpu@23 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu23_intc: interrupt-controller { @@ -872,12 +896,13 @@ cpu24: cpu@24 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu24_intc: interrupt-controller { @@ -907,12 +932,13 @@ cpu25: cpu@25 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu25_intc: interrupt-controller { @@ -942,12 +968,13 @@ cpu26: cpu@26 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu26_intc: interrupt-controller { @@ -977,12 +1004,13 @@ cpu27: cpu@27 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu27_intc: interrupt-controller { @@ -1012,12 +1040,13 @@ cpu28: cpu@28 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu28_intc: interrupt-controller { @@ -1047,12 +1076,13 @@ cpu29: cpu@29 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu29_intc: interrupt-controller { @@ -1082,12 +1112,13 @@ cpu30: cpu@30 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu30_intc: interrupt-controller { @@ -1117,12 +1148,13 @@ cpu31: cpu@31 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu31_intc: interrupt-controller { @@ -1152,12 +1184,13 @@ cpu32: cpu@32 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu32_intc: interrupt-controller { @@ -1187,12 +1220,13 @@ cpu33: cpu@33 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu33_intc: interrupt-controller { @@ -1222,12 +1256,13 @@ cpu34: cpu@34 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu34_intc: interrupt-controller { @@ -1257,12 +1292,13 @@ cpu35: cpu@35 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu35_intc: interrupt-controller { @@ -1292,12 +1328,13 @@ cpu36: cpu@36 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu36_intc: interrupt-controller { @@ -1327,12 +1364,13 @@ cpu37: cpu@37 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu37_intc: interrupt-controller { @@ -1362,12 +1400,13 @@ cpu38: cpu@38 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu38_intc: interrupt-controller { @@ -1397,12 +1436,13 @@ cpu39: cpu@39 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu39_intc: interrupt-controller { @@ -1432,12 +1472,13 @@ cpu40: cpu@40 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu40_intc: interrupt-controller { @@ -1467,12 +1508,13 @@ cpu41: cpu@41 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu41_intc: interrupt-controller { @@ -1502,12 +1544,13 @@ cpu42: cpu@42 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu42_intc: interrupt-controller { @@ -1537,12 +1580,13 @@ cpu43: cpu@43 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu43_intc: interrupt-controller { @@ -1572,12 +1616,13 @@ cpu44: cpu@44 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu44_intc: interrupt-controller { @@ -1607,12 +1652,13 @@ cpu45: cpu@45 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu45_intc: interrupt-controller { @@ -1642,12 +1688,13 @@ cpu46: cpu@46 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu46_intc: interrupt-controller { @@ -1677,12 +1724,13 @@ cpu47: cpu@47 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu47_intc: interrupt-controller { @@ -1712,12 +1760,13 @@ cpu48: cpu@48 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu48_intc: interrupt-controller { @@ -1747,12 +1796,13 @@ cpu49: cpu@49 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu49_intc: interrupt-controller { @@ -1782,12 +1832,13 @@ cpu50: cpu@50 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu50_intc: interrupt-controller { @@ -1817,12 +1868,13 @@ cpu51: cpu@51 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu51_intc: interrupt-controller { @@ -1852,12 +1904,13 @@ cpu52: cpu@52 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu52_intc: interrupt-controller { @@ -1887,12 +1940,13 @@ cpu53: cpu@53 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu53_intc: interrupt-controller { @@ -1922,12 +1976,13 @@ cpu54: cpu@54 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu54_intc: interrupt-controller { @@ -1957,12 +2012,13 @@ cpu55: cpu@55 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu55_intc: interrupt-controller { @@ -1992,12 +2048,13 @@ cpu56: cpu@56 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu56_intc: interrupt-controller { @@ -2027,12 +2084,13 @@ cpu57: cpu@57 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu57_intc: interrupt-controller { @@ -2062,12 +2120,13 @@ cpu58: cpu@58 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu58_intc: interrupt-controller { @@ -2097,12 +2156,13 @@ cpu59: cpu@59 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu59_intc: interrupt-controller { @@ -2132,12 +2192,13 @@ cpu60: cpu@60 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu60_intc: interrupt-controller { @@ -2167,12 +2228,13 @@ cpu61: cpu@61 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu61_intc: interrupt-controller { @@ -2202,12 +2264,13 @@ cpu62: cpu@62 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu62_intc: interrupt-controller { @@ -2237,12 +2300,13 @@ cpu63: cpu@63 { "zawrs", "zba", "zbb", "zbc", "zbs", "zca", "zcb", "zcd", "zfa", "zfbfmin", "zfh", "zfhmin", - "zicbom", "zicbop", "zicboz", + "zicbom", "zicbop", "zicboz", "ziccrse", "zicntr", "zicond","zicsr", "zifencei", "zihintntl", "zihintpause", "zihpm", "zvfbfmin", "zvfbfwma", "zvfh", "zvfhmin"; riscv,cbom-block-size = <64>; + riscv,cbop-block-size = <64>; riscv,cboz-block-size = <64>; cpu63_intc: interrupt-controller { @@ -2714,6 +2778,97 @@ l3_cache: cache-controller-16 { }; }; + pmu { + compatible = "riscv,pmu"; + riscv,event-to-mhpmevent = + <0x00003 0x00000000 0x00000010>, + <0x00004 0x00000000 0x00000011>, + <0x00005 0x00000000 0x00000007>, + <0x00006 0x00000000 0x00000006>, + <0x00008 0x00000000 0x00000027>, + <0x00009 0x00000000 0x00000028>, + <0x10000 0x00000000 0x0000000c>, + <0x10001 0x00000000 0x0000000d>, + <0x10002 0x00000000 0x0000000e>, + <0x10003 0x00000000 0x0000000f>, + <0x10008 0x00000000 0x00000001>, + <0x10009 0x00000000 0x00000002>, + <0x10010 0x00000000 0x00000010>, + <0x10011 0x00000000 0x00000011>, + <0x10012 0x00000000 0x00000012>, + <0x10013 0x00000000 0x00000013>, + <0x10019 0x00000000 0x00000004>, + <0x10021 0x00000000 0x00000003>, + <0x10030 0x00000000 0x0000001c>, + <0x10031 0x00000000 0x0000001b>; + riscv,event-to-mhpmcounters = + <0x00003 0x00003 0xfffffff8>, + <0x00004 0x00004 0xfffffff8>, + <0x00005 0x00005 0xfffffff8>, + <0x00006 0x00006 0xfffffff8>, + <0x00007 0x00007 0xfffffff8>, + <0x00008 0x00008 0xfffffff8>, + <0x00009 0x00009 0xfffffff8>, + <0x0000a 0x0000a 0xfffffff8>, + <0x10000 0x10000 0xfffffff8>, + <0x10001 0x10001 0xfffffff8>, + <0x10002 0x10002 0xfffffff8>, + <0x10003 0x10003 0xfffffff8>, + <0x10008 0x10008 0xfffffff8>, + <0x10009 0x10009 0xfffffff8>, + <0x10010 0x10010 0xfffffff8>, + <0x10011 0x10011 0xfffffff8>, + <0x10012 0x10012 0xfffffff8>, + <0x10013 0x10013 0xfffffff8>, + <0x10019 0x10019 0xfffffff8>, + <0x10021 0x10021 0xfffffff8>, + <0x10030 0x10030 0xfffffff8>, + <0x10031 0x10031 0xfffffff8>; + riscv,raw-event-to-mhpmcounters = + <0x00000000 0x00000001 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000002 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000003 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000004 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000005 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000006 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000007 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000008 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000009 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000000a 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000000b 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000000c 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000000d 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000000e 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000000f 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000010 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000011 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000012 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000013 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000014 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000015 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000016 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000017 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000018 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000019 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000001a 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000001b 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000001c 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000001d 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000001e 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000001f 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000020 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000021 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000022 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000023 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000024 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000025 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000026 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000027 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000028 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x00000029 0xffffffff 0xffffffff 0xfffffff8>, + <0x00000000 0x0000002a 0xffffffff 0xffffffff 0xfffffff8>; + }; + soc { intc: interrupt-controller@6d40000000 { compatible = "sophgo,sg2044-plic", "thead,c900-plic"; diff --git a/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts b/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts index 54cdf4239d5f..fed3d9a384a0 100644 --- a/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts +++ b/arch/riscv/boot/dts/sophgo/sg2044-sophgo-srd3-10.dts @@ -27,6 +27,93 @@ &osc { clock-frequency = <25000000>; }; +&emmc { + bus-width = <4>; + no-sdio; + no-sd; + non-removable; + wp-inverted; + status = "okay"; +}; + +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&porta 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + rx-internal-delay-ps = <2050>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + mcu: syscon@17 { + compatible = "sophgo,sg2044-hwmon-mcu", "sophgo,sg2042-hwmon-mcu"; + reg = <0x17>; + #thermal-sensor-cells = <1>; + }; +}; + +&msi { + status = "okay"; +}; + +&pcie0 { + bus-range = <0x00 0xff>; + linux,pci-domain = <1>; + status = "okay"; +}; + +&pcie1 { + bus-range = <0x00 0xff>; + linux,pci-domain = <0>; + status = "okay"; +}; + +&pcie2 { + bus-range = <0x00 0xff>; + linux,pci-domain = <3>; + status = "okay"; +}; + +&pcie3 { + bus-range = <0x00 0xff>; + linux,pci-domain = <2>; + status = "okay"; +}; + +&pcie4 { + bus-range = <0x00 0xff>; + linux,pci-domain = <4>; + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&sd { + bus-width = <4>; + no-sdio; + no-mmc; + wp-inverted; + status = "okay"; +}; + +&uart0 { + /* for firmware */ + status = "reserved"; +}; + &uart1 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/sophgo/sg2044.dtsi b/arch/riscv/boot/dts/sophgo/sg2044.dtsi index d67e45f77d6e..6ec955744b0c 100644 --- a/arch/riscv/boot/dts/sophgo/sg2044.dtsi +++ b/arch/riscv/boot/dts/sophgo/sg2044.dtsi @@ -3,7 +3,11 @@ * Copyright (C) 2025 Inochi Amaoto */ +#include +#include #include +#include +#include #include "sg2044-cpus.dtsi" #include "sg2044-reset.h" @@ -28,10 +32,243 @@ soc { #size-cells = <2>; ranges; + pcie0: pcie@6c00000000 { + compatible = "sophgo,sg2044-pcie"; + reg = <0x6c 0x00000000 0x0 0x00001000>, + <0x6c 0x00300000 0x0 0x00004000>, + <0x48 0x00000000 0x0 0x00001000>, + <0x6c 0x000c0000 0x0 0x00001000>; + reg-names = "dbi", "atu", "config", "app"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + clocks = <&clk CLK_GATE_PCIE_1G>; + clock-names = "core"; + device_type = "pci"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + msi-parent = <&msi>; + ranges = <0x01000000 0x0 0x00000000 0x48 0x10000000 0x0 0x00200000>, + <0x42000000 0x0 0x10000000 0x0 0x10000000 0x0 0x04000000>, + <0x02000000 0x0 0x14000000 0x0 0x14000000 0x0 0x04000000>, + <0x43000000 0x4a 0x00000000 0x4a 0x00000000 0x2 0x00000000>, + <0x03000000 0x49 0x00000000 0x49 0x00000000 0x1 0x00000000>; + status = "disabled"; + + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <65 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + }; + + pcie1: pcie@6c00400000 { + compatible = "sophgo,sg2044-pcie"; + reg = <0x6c 0x00400000 0x0 0x00001000>, + <0x6c 0x00700000 0x0 0x00004000>, + <0x40 0x00000000 0x0 0x00001000>, + <0x6c 0x00780000 0x0 0x00001000>; + reg-names = "dbi", "atu", "config", "app"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + clocks = <&clk CLK_GATE_PCIE_1G>; + clock-names = "core"; + device_type = "pci"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + msi-parent = <&msi>; + ranges = <0x01000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00200000>, + <0x42000000 0x0 0x00000000 0x0 0x00000000 0x0 0x04000000>, + <0x02000000 0x0 0x04000000 0x0 0x04000000 0x0 0x04000000>, + <0x43000000 0x42 0x00000000 0x42 0x00000000 0x2 0x00000000>, + <0x03000000 0x41 0x00000000 0x41 0x00000000 0x1 0x00000000>; + status = "disabled"; + + pcie_intc1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + }; + + pcie2: pcie@6c04000000 { + compatible = "sophgo,sg2044-pcie"; + reg = <0x6c 0x04000000 0x0 0x00001000>, + <0x6c 0x04300000 0x0 0x00004000>, + <0x58 0x00000000 0x0 0x00001000>, + <0x6c 0x040c0000 0x0 0x00001000>; + reg-names = "dbi", "atu", "config", "app"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + clocks = <&clk CLK_GATE_PCIE_1G>; + clock-names = "core"; + device_type = "pci"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc2 0>, + <0 0 0 2 &pcie_intc2 1>, + <0 0 0 3 &pcie_intc2 2>, + <0 0 0 4 &pcie_intc2 3>; + msi-parent = <&msi>; + ranges = <0x01000000 0x0 0x00000000 0x58 0x10000000 0x0 0x00200000>, + <0x42000000 0x0 0x30000000 0x0 0x30000000 0x0 0x04000000>, + <0x02000000 0x0 0x34000000 0x0 0x34000000 0x0 0x04000000>, + <0x43000000 0x5a 0x00000000 0x5a 0x00000000 0x2 0x00000000>, + <0x03000000 0x59 0x00000000 0x59 0x00000000 0x1 0x00000000>; + status = "disabled"; + + pcie_intc2: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + }; + + pcie3: pcie@6c04400000 { + compatible = "sophgo,sg2044-pcie"; + reg = <0x6c 0x04400000 0x0 0x00001000>, + <0x6c 0x04700000 0x0 0x00004000>, + <0x50 0x00000000 0x0 0x00001000>, + <0x6c 0x04780000 0x0 0x00001000>; + reg-names = "dbi", "atu", "config", "app"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + clocks = <&clk CLK_GATE_PCIE_1G>; + clock-names = "core"; + device_type = "pci"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc3 0>, + <0 0 0 2 &pcie_intc3 1>, + <0 0 0 3 &pcie_intc3 2>, + <0 0 0 4 &pcie_intc3 3>; + msi-parent = <&msi>; + ranges = <0x01000000 0x0 0x00000000 0x50 0x10000000 0x0 0x00200000>, + <0x42000000 0x0 0x20000000 0x0 0x20000000 0x0 0x04000000>, + <0x02000000 0x0 0x24000000 0x0 0x24000000 0x0 0x04000000>, + <0x43000000 0x52 0x00000000 0x52 0x00000000 0x2 0x00000000>, + <0x03000000 0x51 0x00000000 0x51 0x00000000 0x1 0x00000000>; + status = "disabled"; + + pcie_intc3: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + }; + + pcie4: pcie@6c08400000 { + compatible = "sophgo,sg2044-pcie"; + reg = <0x6c 0x08400000 0x0 0x00001000>, + <0x6c 0x08700000 0x0 0x00004000>, + <0x60 0x00000000 0x0 0x00001000>, + <0x6c 0x08780000 0x0 0x00001000>; + reg-names = "dbi", "atu", "config", "app"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + clocks = <&clk CLK_GATE_PCIE_1G>; + clock-names = "core"; + device_type = "pci"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc4 0>, + <0 0 0 2 &pcie_intc4 1>, + <0 0 0 3 &pcie_intc4 2>, + <0 0 0 4 &pcie_intc4 3>; + msi-parent = <&msi>; + ranges = <0x01000000 0x0 0x00000000 0x60 0x10000000 0x0 0x00200000>, + <0x42000000 0x0 0x40000000 0x0 0x40000000 0x0 0x04000000>, + <0x02000000 0x0 0x44000000 0x0 0x44000000 0x0 0x04000000>, + <0x43000000 0x62 0x00000000 0x62 0x00000000 0x2 0x00000000>, + <0x03000000 0x61 0x00000000 0x61 0x00000000 0x1 0x00000000>; + status = "disabled"; + + pcie_intc4: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; + }; + + msi: msi-controller@6d50000000 { + compatible = "sophgo,sg2044-msi"; + reg = <0x6d 0x50000000 0x0 0x800>, + <0x0 0x7ee00000 0x0 0x40>; + reg-names = "clr", "doorbell"; + #msi-cells = <0>; + msi-controller; + msi-ranges = <&intc 352 IRQ_TYPE_LEVEL_HIGH 512>; + status = "disabled"; + }; + + spifmc0: spi@7001000000 { + compatible = "sophgo,sg2044-spifmc-nor"; + reg = <0x70 0x01000000 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_GATE_AHB_SPIFMC>; + interrupt-parent = <&intc>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_SPIFMC0>; + status = "disabled"; + }; + + spifmc1: spi@7005000000 { + compatible = "sophgo,sg2044-spifmc-nor"; + reg = <0x70 0x05000000 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_GATE_AHB_SPIFMC>; + interrupt-parent = <&intc>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_SPIFMC1>; + status = "disabled"; + }; + + dmac0: dma-controller@7020000000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x70 0x20000000 0x0 0x10000>; + #dma-cells = <1>; + clock-names = "core-clk", "cfgr-clk"; + clocks = <&clk CLK_GATE_SYSDMA_AXI>, + <&clk CLK_GATE_SYSDMA_AXI>; + dma-noncoherent; + interrupt-parent = <&intc>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <8>; + snps,priority = <0 1 2 3 4 5 6 7>; + snps,block-size = <4096 4096 4096 4096 + 4096 4096 4096 4096>; + snps,dma-masters = <2>; + snps,data-width = <2>; + snps,axi-max-burst-len = <4>; + status = "disabled"; + }; + uart0: serial@7030000000 { compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart"; reg = <0x70 0x30000000 0x0 0x1000>; clock-frequency = <500000000>; + clocks = <&clk CLK_GATE_UART_500M>, + <&clk CLK_GATE_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupt-parent = <&intc>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; @@ -44,6 +281,9 @@ uart1: serial@7030001000 { compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart"; reg = <0x70 0x30001000 0x0 0x1000>; clock-frequency = <500000000>; + clocks = <&clk CLK_GATE_UART_500M>, + <&clk CLK_GATE_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupt-parent = <&intc>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; @@ -56,6 +296,9 @@ uart2: serial@7030002000 { compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart"; reg = <0x70 0x30002000 0x0 0x1000>; clock-frequency = <500000000>; + clocks = <&clk CLK_GATE_UART_500M>, + <&clk CLK_GATE_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupt-parent = <&intc>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; @@ -68,6 +311,9 @@ uart3: serial@7030003000 { compatible = "sophgo,sg2044-uart", "snps,dw-apb-uart"; reg = <0x70 0x30003000 0x0 0x1000>; clock-frequency = <500000000>; + clocks = <&clk CLK_GATE_UART_500M>, + <&clk CLK_GATE_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupt-parent = <&intc>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; @@ -76,6 +322,259 @@ uart3: serial@7030003000 { status = "disabled"; }; + gmac0: ethernet@7030006000 { + compatible = "sophgo,sg2044-dwmac", "snps,dwmac-5.30a"; + reg = <0x70 0x30006000 0x0 0x4000>; + clocks = <&clk CLK_GATE_AXI_ETH0>, + <&clk CLK_GATE_PTP_REF_I_ETH0>, + <&clk CLK_GATE_TX_ETH0>; + clock-names = "stmmaceth", "ptp_ref", "tx"; + dma-noncoherent; + interrupt-parent = <&intc>; + interrupts = <296 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&rst RST_ETH0>; + reset-names = "stmmaceth"; + snps,multicast-filter-bins = <0>; + snps,perfect-filter-entries = <1>; + snps,aal; + snps,tso; + snps,txpbl = <32>; + snps,rxpbl = <32>; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + status = "disabled"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <8>; + snps,rx-sched-wsp; + queue0 {}; + queue1 {}; + queue2 {}; + queue3 {}; + queue4 {}; + queue5 {}; + queue6 {}; + queue7 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <8>; + queue0 {}; + queue1 {}; + queue2 {}; + queue3 {}; + queue4 {}; + queue5 {}; + queue6 {}; + queue7 {}; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <16 8 4 0 0 0 0>; + snps,wr_osr_lmt = <1>; + snps,rd_osr_lmt = <2>; + }; + }; + + emmc: mmc@703000a000 { + compatible = "sophgo,sg2044-dwcmshc", "sophgo,sg2042-dwcmshc"; + reg = <0x70 0x3000a000 0x0 0x1000>; + clocks = <&clk CLK_GATE_EMMC>, + <&clk CLK_GATE_AXI_EMMC>, + <&clk CLK_GATE_EMMC_100K>; + clock-names = "core", "bus", "timer"; + interrupt-parent = <&intc>; + interrupts = <298 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sd: mmc@703000b000 { + compatible = "sophgo,sg2044-dwcmshc", "sophgo,sg2042-dwcmshc"; + reg = <0x70 0x3000b000 0x0 0x1000>; + clocks = <&clk CLK_GATE_SD>, + <&clk CLK_GATE_AXI_SD>, + <&clk CLK_GATE_SD_100K>; + clock-names = "core", "bus", "timer"; + interrupt-parent = <&intc>; + interrupts = <300 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c0: i2c@7040005000 { + compatible = "sophgo,sg2044-i2c", "snps,designware-i2c"; + reg = <0x70 0x40005000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + clocks = <&clk CLK_GATE_APB_I2C>; + clock-names = "ref"; + interrupt-parent = <&intc>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C0>; + status = "disabled"; + }; + + i2c1: i2c@7040006000 { + compatible = "sophgo,sg2044-i2c", "snps,designware-i2c"; + reg = <0x70 0x40006000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + clocks = <&clk CLK_GATE_APB_I2C>; + clock-names = "ref"; + interrupt-parent = <&intc>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@7040007000 { + compatible = "sophgo,sg2044-i2c", "snps,designware-i2c"; + reg = <0x70 0x40007000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + clocks = <&clk CLK_GATE_APB_I2C>; + clock-names = "ref"; + interrupt-parent = <&intc>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@7040008000 { + compatible = "sophgo,sg2044-i2c", "snps,designware-i2c"; + reg = <0x70 0x40008000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + clocks = <&clk CLK_GATE_APB_I2C>; + clock-names = "ref"; + interrupt-parent = <&intc>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C3>; + status = "disabled"; + }; + + gpio0: gpio@7040009000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x70 0x40009000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_GATE_APB_GPIO>, + <&clk CLK_GATE_GPIO_DB>; + clock-names = "bus", "db"; + resets = <&rst RST_GPIO0>; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@704000a000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x70 0x4000a000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_GATE_APB_GPIO>, + <&clk CLK_GATE_GPIO_DB>; + clock-names = "bus", "db"; + resets = <&rst RST_GPIO1>; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio2: gpio@704000b000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x70 0x4000b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_GATE_APB_GPIO>, + <&clk CLK_GATE_GPIO_DB>; + clock-names = "bus", "db"; + resets = <&rst RST_GPIO2>; + + portc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + pwm: pwm@704000c000 { + compatible = "sophgo,sg2044-pwm"; + reg = <0x70 0x4000c000 0x0 0x1000>; + #pwm-cells = <3>; + clocks = <&clk CLK_GATE_APB_PWM>; + clock-names = "apb"; + resets = <&rst RST_PWM>; + status = "disabled"; + }; + + syscon: syscon@7050000000 { + compatible = "sophgo,sg2044-top-syscon", "syscon"; + reg = <0x70 0x50000000 0x0 0x1000>; + #clock-cells = <1>; + clocks = <&osc>; + }; + + pinctrl: pinctrl@7050001000 { + compatible = "sophgo,sg2044-pinctrl"; + reg = <0x70 0x50001000 0x0 0x1000>; + }; + + clk: clock-controller@7050002000 { + compatible = "sophgo,sg2044-clk"; + reg = <0x70 0x50002000 0x0 0x1000>; + #clock-cells = <1>; + clocks = <&syscon CLK_FPLL0>, <&syscon CLK_FPLL1>, + <&syscon CLK_FPLL2>, <&syscon CLK_DPLL0>, + <&syscon CLK_DPLL1>, <&syscon CLK_DPLL2>, + <&syscon CLK_DPLL3>, <&syscon CLK_DPLL4>, + <&syscon CLK_DPLL5>, <&syscon CLK_DPLL6>, + <&syscon CLK_DPLL7>, <&syscon CLK_MPLL0>, + <&syscon CLK_MPLL1>, <&syscon CLK_MPLL2>, + <&syscon CLK_MPLL3>, <&syscon CLK_MPLL4>, + <&syscon CLK_MPLL5>; + clock-names = "fpll0", "fpll1", "fpll2", "dpll0", + "dpll1", "dpll2", "dpll3", "dpll4", + "dpll5", "dpll6", "dpll7", "mpll0", + "mpll1", "mpll2", "mpll3", "mpll4", + "mpll5"; + }; + rst: reset-controller@7050003000 { compatible = "sophgo,sg2044-reset", "sophgo,sg2042-reset"; diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts index 816ef1bc358e..fe22c747c501 100644 --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts @@ -30,6 +30,16 @@ led1 { }; }; +&emmc { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_2_cfg>; diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi index 283663647a86..381055737422 100644 --- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi +++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi @@ -20,4 +20,12 @@ uart0-2-pins { drive-strength = <32>; }; }; + + pwm14_1_cfg: pwm14-1-cfg { + pwm14-1-pins { + pinmux = ; + bias-pull-up = <0>; + drive-strength = <32>; + }; + }; }; diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi index c0f8c5fca975..abde8bb07c95 100644 --- a/arch/riscv/boot/dts/spacemit/k1.dtsi +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi @@ -346,6 +346,18 @@ soc { dma-noncoherent; ranges; + syscon_rcpu: system-controller@c0880000 { + compatible = "spacemit,k1-syscon-rcpu"; + reg = <0x0 0xc0880000 0x0 0x2048>; + #reset-cells = <1>; + }; + + syscon_rcpu2: system-controller@c0888000 { + compatible = "spacemit,k1-syscon-rcpu2"; + reg = <0x0 0xc0888000 0x0 0x28>; + #reset-cells = <1>; + }; + syscon_apbc: system-controller@d4015000 { compatible = "spacemit,k1-syscon-apbc"; reg = <0x0 0xd4015000 0x0 0x1000>; @@ -357,114 +369,6 @@ syscon_apbc: system-controller@d4015000 { #reset-cells = <1>; }; - uart0: serial@d4017000 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017000 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART0>, - <&syscon_apbc CLK_UART0_BUS>; - clock-names = "core", "bus"; - interrupts = <42>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart2: serial@d4017100 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017100 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART2>, - <&syscon_apbc CLK_UART2_BUS>; - clock-names = "core", "bus"; - interrupts = <44>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart3: serial@d4017200 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017200 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART3>, - <&syscon_apbc CLK_UART3_BUS>; - clock-names = "core", "bus"; - interrupts = <45>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart4: serial@d4017300 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017300 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART4>, - <&syscon_apbc CLK_UART4_BUS>; - clock-names = "core", "bus"; - interrupts = <46>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart5: serial@d4017400 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017400 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART5>, - <&syscon_apbc CLK_UART5_BUS>; - clock-names = "core", "bus"; - interrupts = <47>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart6: serial@d4017500 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017500 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART6>, - <&syscon_apbc CLK_UART6_BUS>; - clock-names = "core", "bus"; - interrupts = <48>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart7: serial@d4017600 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017600 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART7>, - <&syscon_apbc CLK_UART7_BUS>; - clock-names = "core", "bus"; - interrupts = <49>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart8: serial@d4017700 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017700 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART8>, - <&syscon_apbc CLK_UART8_BUS>; - clock-names = "core", "bus"; - interrupts = <50>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart9: serial@d4017800 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xd4017800 0x0 0x100>; - clocks = <&syscon_apbc CLK_UART9>, - <&syscon_apbc CLK_UART9_BUS>; - clock-names = "core", "bus"; - interrupts = <51>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - gpio: gpio@d4019000 { compatible = "spacemit,k1-gpio"; reg = <0x0 0xd4019000 0x0 0x100>; @@ -483,6 +387,78 @@ gpio: gpio@d4019000 { <&pinctrl 3 0 96 32>; }; + pwm0: pwm@d401a000 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401a000 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM0>; + resets = <&syscon_apbc RESET_PWM0>; + status = "disabled"; + }; + + pwm1: pwm@d401a400 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401a400 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM1>; + resets = <&syscon_apbc RESET_PWM1>; + status = "disabled"; + }; + + pwm2: pwm@d401a800 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401a800 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM2>; + resets = <&syscon_apbc RESET_PWM2>; + status = "disabled"; + }; + + pwm3: pwm@d401ac00 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401ac00 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM3>; + resets = <&syscon_apbc RESET_PWM3>; + status = "disabled"; + }; + + pwm4: pwm@d401b000 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401b000 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM4>; + resets = <&syscon_apbc RESET_PWM4>; + status = "disabled"; + }; + + pwm5: pwm@d401b400 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401b400 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM5>; + resets = <&syscon_apbc RESET_PWM5>; + status = "disabled"; + }; + + pwm6: pwm@d401b800 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401b800 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM6>; + resets = <&syscon_apbc RESET_PWM6>; + status = "disabled"; + }; + + pwm7: pwm@d401bc00 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd401bc00 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM7>; + resets = <&syscon_apbc RESET_PWM7>; + status = "disabled"; + }; + pinctrl: pinctrl@d401e000 { compatible = "spacemit,k1-pinctrl"; reg = <0x0 0xd401e000 0x0 0x400>; @@ -491,6 +467,114 @@ pinctrl: pinctrl@d401e000 { clock-names = "func", "bus"; }; + pwm8: pwm@d4020000 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4020000 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM8>; + resets = <&syscon_apbc RESET_PWM8>; + status = "disabled"; + }; + + pwm9: pwm@d4020400 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4020400 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM9>; + resets = <&syscon_apbc RESET_PWM9>; + status = "disabled"; + }; + + pwm10: pwm@d4020800 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4020800 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM10>; + resets = <&syscon_apbc RESET_PWM10>; + status = "disabled"; + }; + + pwm11: pwm@d4020c00 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4020c00 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM11>; + resets = <&syscon_apbc RESET_PWM11>; + status = "disabled"; + }; + + pwm12: pwm@d4021000 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4021000 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM12>; + resets = <&syscon_apbc RESET_PWM12>; + status = "disabled"; + }; + + pwm13: pwm@d4021400 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4021400 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM13>; + resets = <&syscon_apbc RESET_PWM13>; + status = "disabled"; + }; + + pwm14: pwm@d4021800 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4021800 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM14>; + resets = <&syscon_apbc RESET_PWM14>; + status = "disabled"; + }; + + pwm15: pwm@d4021c00 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4021c00 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM15>; + resets = <&syscon_apbc RESET_PWM15>; + status = "disabled"; + }; + + pwm16: pwm@d4022000 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4022000 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM16>; + resets = <&syscon_apbc RESET_PWM16>; + status = "disabled"; + }; + + pwm17: pwm@d4022400 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4022400 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM17>; + resets = <&syscon_apbc RESET_PWM17>; + status = "disabled"; + }; + + pwm18: pwm@d4022800 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4022800 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM18>; + resets = <&syscon_apbc RESET_PWM18>; + status = "disabled"; + }; + + pwm19: pwm@d4022c00 { + compatible = "spacemit,k1-pwm", "marvell,pxa910-pwm"; + reg = <0x0 0xd4022c00 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&syscon_apbc CLK_PWM19>; + resets = <&syscon_apbc RESET_PWM19>; + status = "disabled"; + }; + syscon_mpmu: system-controller@d4050000 { compatible = "spacemit,k1-syscon-mpmu"; reg = <0x0 0xd4050000 0x0 0x209c>; @@ -553,14 +637,201 @@ clint: timer@e4000000 { <&cpu7_intc 3>, <&cpu7_intc 7>; }; - sec_uart1: serial@f0612000 { - compatible = "spacemit,k1-uart", "intel,xscale-uart"; - reg = <0x0 0xf0612000 0x0 0x100>; - interrupts = <43>; - clock-frequency = <14857000>; - reg-shift = <2>; - reg-io-width = <4>; - status = "reserved"; /* for TEE usage */ + syscon_apbc2: system-controller@f0610000 { + compatible = "spacemit,k1-syscon-apbc2"; + reg = <0x0 0xf0610000 0x0 0x20>; + #reset-cells = <1>; + }; + + camera-bus { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>, + <0x0 0x80000000 0x1 0x00000000 0x1 0x80000000>; + }; + + dma-bus { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>, + <0x1 0x00000000 0x1 0x80000000 0x3 0x00000000>; + + uart0: serial@d4017000 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017000 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART0>, + <&syscon_apbc CLK_UART0_BUS>; + clock-names = "core", "bus"; + interrupts = <42>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@d4017100 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017100 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART2>, + <&syscon_apbc CLK_UART2_BUS>; + clock-names = "core", "bus"; + interrupts = <44>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@d4017200 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017200 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART3>, + <&syscon_apbc CLK_UART3_BUS>; + clock-names = "core", "bus"; + interrupts = <45>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart4: serial@d4017300 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017300 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART4>, + <&syscon_apbc CLK_UART4_BUS>; + clock-names = "core", "bus"; + interrupts = <46>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart5: serial@d4017400 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017400 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART5>, + <&syscon_apbc CLK_UART5_BUS>; + clock-names = "core", "bus"; + interrupts = <47>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart6: serial@d4017500 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017500 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART6>, + <&syscon_apbc CLK_UART6_BUS>; + clock-names = "core", "bus"; + interrupts = <48>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart7: serial@d4017600 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017600 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART7>, + <&syscon_apbc CLK_UART7_BUS>; + clock-names = "core", "bus"; + interrupts = <49>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart8: serial@d4017700 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017700 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART8>, + <&syscon_apbc CLK_UART8_BUS>; + clock-names = "core", "bus"; + interrupts = <50>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart9: serial@d4017800 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xd4017800 0x0 0x100>; + clocks = <&syscon_apbc CLK_UART9>, + <&syscon_apbc CLK_UART9_BUS>; + clock-names = "core", "bus"; + interrupts = <51>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + sec_uart1: serial@f0612000 { + compatible = "spacemit,k1-uart", + "intel,xscale-uart"; + reg = <0x0 0xf0612000 0x0 0x100>; + interrupts = <43>; + clock-frequency = <14857000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "reserved"; /* for TEE usage */ + }; + }; + + multimedia-bus { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>, + <0x0 0x80000000 0x1 0x00000000 0x3 0x80000000>; + }; + + network-bus { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>, + <0x0 0x80000000 0x1 0x00000000 0x0 0x80000000>; + }; + + pcie-bus { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>, + <0x0 0xb8000000 0x1 0x38000000 0x3 0x48000000>; + }; + + storage-bus { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + + emmc: mmc@d4281000 { + compatible = "spacemit,k1-sdhci"; + reg = <0x0 0xd4281000 0x0 0x200>; + clocks = <&syscon_apmu CLK_SDH_AXI>, + <&syscon_apmu CLK_SDH2>; + clock-names = "core", "io"; + interrupts = <101>; + status = "disabled"; + }; }; }; }; diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index 4baeb981d4df..2eaf01775ef5 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -8,6 +8,7 @@ #include "jh7110.dtsi" #include "jh7110-pinfunc.h" #include +#include #include / { @@ -38,6 +39,14 @@ gpio-restart { priority = <224>; }; + leds { + compatible = "gpio-leds"; + + led_status_power: led-0 { + gpios = <&aongpio 3 GPIO_ACTIVE_HIGH>; + }; + }; + pwmdac_codec: audio-codec { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts index 3bd62ab78523..fdaf6b4557da 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -12,9 +12,9 @@ / { }; &gmac0 { - starfive,tx-use-rgmii-clk; assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + starfive,tx-use-rgmii-clk; status = "okay"; }; @@ -31,14 +31,14 @@ &pcie1 { }; &phy0 { - motorcomm,tx-clk-adj-enabled; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; motorcomm,tx-clk-10-inverted; motorcomm,tx-clk-100-inverted; motorcomm,tx-clk-1000-inverted; - motorcomm,rx-clk-drv-microamp = <3970>; - motorcomm,rx-data-drv-microamp = <2910>; - rx-internal-delay-ps = <1500>; - tx-internal-delay-ps = <1500>; + motorcomm,tx-clk-adj-enabled; }; &pwm { diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index 1db0054c4e09..42724bf7e90e 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include / { compatible = "thead,th1520"; @@ -234,6 +235,8 @@ aon: aon { compatible = "thead,th1520-aon"; mboxes = <&mbox_910t 1>; mbox-names = "aon"; + resets = <&rst TH1520_RESET_ID_GPU_CLKGEN>; + reset-names = "gpu-clkgen"; #power-domain-cells = <1>; }; @@ -662,6 +665,17 @@ padctrl_aosys: pinctrl@fffff4a000 { thead,pad-group = <1>; }; + pvt: pvt@fffff4e000 { + compatible = "moortec,mr75203"; + reg = <0xff 0xfff4e000 0x0 0x80>, + <0xff 0xfff4e080 0x0 0x100>, + <0xff 0xfff4e180 0x0 0x680>, + <0xff 0xfff4e800 0x0 0x600>; + reg-names = "common", "ts", "pd", "vm"; + clocks = <&aonsys_clk>; + #thermal-sensor-cells = <1>; + }; + gpio@fffff52000 { compatible = "snps,dw-apb-gpio"; reg = <0xff 0xfff52000 0x0 0x1000>; diff --git a/drivers/pci/pwrctrl/slot.c b/drivers/pci/pwrctrl/slot.c index 18becc144913..6e138310b45b 100644 --- a/drivers/pci/pwrctrl/slot.c +++ b/drivers/pci/pwrctrl/slot.c @@ -4,6 +4,7 @@ * Author: Manivannan Sadhasivam */ +#include #include #include #include @@ -30,6 +31,7 @@ static int pci_pwrctrl_slot_probe(struct platform_device *pdev) { struct pci_pwrctrl_slot_data *slot; struct device *dev = &pdev->dev; + struct clk *clk; int ret; slot = devm_kzalloc(dev, sizeof(*slot), GFP_KERNEL); @@ -55,6 +57,12 @@ static int pci_pwrctrl_slot_probe(struct platform_device *pdev) if (ret) goto err_regulator_disable; + clk = devm_clk_get_optional_enabled(dev, NULL); + if (IS_ERR(clk)) { + return dev_err_probe(dev, PTR_ERR(clk), + "Failed to enable slot clock\n"); + } + pci_pwrctrl_init(&slot->ctx, dev); ret = devm_pci_pwrctrl_device_set_ready(dev, &slot->ctx); diff --git a/include/dt-bindings/clock/nvidia,tegra264.h b/include/dt-bindings/clock/nvidia,tegra264.h new file mode 100644 index 000000000000..0fc2ad5e6cef --- /dev/null +++ b/include/dt-bindings/clock/nvidia,tegra264.h @@ -0,0 +1,466 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* Copyright (c) 2022-2025, NVIDIA CORPORATION. All rights reserved. */ + +#ifndef DT_BINDINGS_CLOCK_NVIDIA_TEGRA264_H +#define DT_BINDINGS_CLOCK_NVIDIA_TEGRA264_H + +#define TEGRA264_CLK_OSC 1 +#define TEGRA264_CLK_CLK_S 2 +#define TEGRA264_CLK_JTAG_REG 3 +#define TEGRA264_CLK_SPLL 4 +#define TEGRA264_CLK_SPLL_OUT0 5 +#define TEGRA264_CLK_SPLL_OUT1 6 +#define TEGRA264_CLK_SPLL_OUT2 7 +#define TEGRA264_CLK_SPLL_OUT3 8 +#define TEGRA264_CLK_SPLL_OUT4 9 +#define TEGRA264_CLK_SPLL_OUT5 10 +#define TEGRA264_CLK_SPLL_OUT6 11 +#define TEGRA264_CLK_SPLL_OUT7 12 +#define TEGRA264_CLK_AON_I2C 13 +#define TEGRA264_CLK_HOST1X 14 +#define TEGRA264_CLK_ISP 15 +#define TEGRA264_CLK_ISP1 16 +#define TEGRA264_CLK_ISP_ROOT 17 +#define TEGRA264_CLK_NAFLL_PVA0_CORE 18 +#define TEGRA264_CLK_NAFLL_PVA0_VPS 19 +#define TEGRA264_CLK_NVCSI 20 +#define TEGRA264_CLK_NVCSILP 21 +#define TEGRA264_CLK_PLLP_OUT0 22 +#define TEGRA264_CLK_PVA0_CPU_AXI 23 +#define TEGRA264_CLK_PVA0_VPS 24 +#define TEGRA264_CLK_PWM10 25 +#define TEGRA264_CLK_PWM2 26 +#define TEGRA264_CLK_PWM3 27 +#define TEGRA264_CLK_PWM4 28 +#define TEGRA264_CLK_PWM5 29 +#define TEGRA264_CLK_PWM9 30 +#define TEGRA264_CLK_QSPI0 31 +#define TEGRA264_CLK_QSPI0_2X_PM 32 +#define TEGRA264_CLK_RCE1_CPU 33 +#define TEGRA264_CLK_RCE1_NIC 34 +#define TEGRA264_CLK_RCE_CPU 35 +#define TEGRA264_CLK_RCE_NIC 36 +#define TEGRA264_CLK_SE 37 +#define TEGRA264_CLK_SEU1 38 +#define TEGRA264_CLK_SEU2 39 +#define TEGRA264_CLK_SEU3 40 +#define TEGRA264_CLK_SE_ROOT 41 +#define TEGRA264_CLK_SPI1 42 +#define TEGRA264_CLK_SPI2 43 +#define TEGRA264_CLK_SPI3 44 +#define TEGRA264_CLK_SPI4 45 +#define TEGRA264_CLK_SPI5 46 +#define TEGRA264_CLK_TOP_I2C 47 +#define TEGRA264_CLK_TSEC 48 +#define TEGRA264_CLK_TSEC_PKA 49 +#define TEGRA264_CLK_UART0 50 +#define TEGRA264_CLK_UART10 51 +#define TEGRA264_CLK_UART11 52 +#define TEGRA264_CLK_UART4 53 +#define TEGRA264_CLK_UART5 54 +#define TEGRA264_CLK_UART8 55 +#define TEGRA264_CLK_UART9 56 +#define TEGRA264_CLK_VI 57 +#define TEGRA264_CLK_VI1 58 +#define TEGRA264_CLK_VIC 59 +#define TEGRA264_CLK_VI_ROOT 60 +#define TEGRA264_CLK_DISPPLL 61 +#define TEGRA264_CLK_SPPLL0 62 +#define TEGRA264_CLK_SPPLL0_CLKOUT1A 63 +#define TEGRA264_CLK_SPPLL0_CLKOUT2A 64 +#define TEGRA264_CLK_SPPLL1 65 +#define TEGRA264_CLK_VPLL0 66 +#define TEGRA264_CLK_VPLL1 67 +#define TEGRA264_CLK_VPLL2 68 +#define TEGRA264_CLK_VPLL3 69 +#define TEGRA264_CLK_VPLL4 70 +#define TEGRA264_CLK_VPLL5 71 +#define TEGRA264_CLK_VPLL6 72 +#define TEGRA264_CLK_VPLL7 73 +#define TEGRA264_CLK_RG0_DIV 74 +#define TEGRA264_CLK_RG1_DIV 75 +#define TEGRA264_CLK_RG2_DIV 76 +#define TEGRA264_CLK_RG3_DIV 77 +#define TEGRA264_CLK_RG4_DIV 78 +#define TEGRA264_CLK_RG5_DIV 79 +#define TEGRA264_CLK_RG6_DIV 80 +#define TEGRA264_CLK_RG7_DIV 81 +#define TEGRA264_CLK_RG0 82 +#define TEGRA264_CLK_RG1 83 +#define TEGRA264_CLK_RG2 84 +#define TEGRA264_CLK_RG3 85 +#define TEGRA264_CLK_RG4 86 +#define TEGRA264_CLK_RG5 87 +#define TEGRA264_CLK_RG6 88 +#define TEGRA264_CLK_RG7 89 +#define TEGRA264_CLK_DISP 90 +#define TEGRA264_CLK_DSC 91 +#define TEGRA264_CLK_DSC_ROOT 92 +#define TEGRA264_CLK_HUB 93 +#define TEGRA264_CLK_VPLLX_SOR0_MUXED 94 +#define TEGRA264_CLK_VPLLX_SOR1_MUXED 95 +#define TEGRA264_CLK_VPLLX_SOR2_MUXED 96 +#define TEGRA264_CLK_VPLLX_SOR3_MUXED 97 +#define TEGRA264_CLK_LINKA_SYM 98 +#define TEGRA264_CLK_LINKB_SYM 99 +#define TEGRA264_CLK_LINKC_SYM 100 +#define TEGRA264_CLK_LINKD_SYM 101 +#define TEGRA264_CLK_PRE_SOR0 102 +#define TEGRA264_CLK_PRE_SOR1 103 +#define TEGRA264_CLK_PRE_SOR2 104 +#define TEGRA264_CLK_PRE_SOR3 105 +#define TEGRA264_CLK_SOR0_PLL_REF 106 +#define TEGRA264_CLK_SOR1_PLL_REF 107 +#define TEGRA264_CLK_SOR2_PLL_REF 108 +#define TEGRA264_CLK_SOR3_PLL_REF 109 +#define TEGRA264_CLK_SOR0_PAD 110 +#define TEGRA264_CLK_SOR1_PAD 111 +#define TEGRA264_CLK_SOR2_PAD 112 +#define TEGRA264_CLK_SOR3_PAD 113 +#define TEGRA264_CLK_SOR0_REF 114 +#define TEGRA264_CLK_SOR1_REF 115 +#define TEGRA264_CLK_SOR2_REF 116 +#define TEGRA264_CLK_SOR3_REF 117 +#define TEGRA264_CLK_SOR0_DIV 118 +#define TEGRA264_CLK_SOR1_DIV 119 +#define TEGRA264_CLK_SOR2_DIV 120 +#define TEGRA264_CLK_SOR3_DIV 121 +#define TEGRA264_CLK_SOR0 122 +#define TEGRA264_CLK_SOR1 123 +#define TEGRA264_CLK_SOR2 124 +#define TEGRA264_CLK_SOR3 125 +#define TEGRA264_CLK_SF0_SOR 126 +#define TEGRA264_CLK_SF1_SOR 127 +#define TEGRA264_CLK_SF2_SOR 128 +#define TEGRA264_CLK_SF3_SOR 129 +#define TEGRA264_CLK_SF4_SOR 130 +#define TEGRA264_CLK_SF5_SOR 131 +#define TEGRA264_CLK_SF6_SOR 132 +#define TEGRA264_CLK_SF7_SOR 133 +#define TEGRA264_CLK_SF0 134 +#define TEGRA264_CLK_SF1 135 +#define TEGRA264_CLK_SF2 136 +#define TEGRA264_CLK_SF3 137 +#define TEGRA264_CLK_SF4 138 +#define TEGRA264_CLK_SF5 139 +#define TEGRA264_CLK_SF6 140 +#define TEGRA264_CLK_SF7 141 +#define TEGRA264_CLK_MAUD 142 +#define TEGRA264_CLK_AZA_2XBIT 143 +#define TEGRA264_CLK_DCE_CPU 144 +#define TEGRA264_CLK_DCE_NIC 145 +#define TEGRA264_CLK_PLLC4 146 +#define TEGRA264_CLK_PLLC4_OUT0 147 +#define TEGRA264_CLK_PLLC4_OUT1 148 +#define TEGRA264_CLK_PLLC4_MUXED 149 +#define TEGRA264_CLK_SDMMC1 150 +#define TEGRA264_CLK_SDMMC_LEGACY_TM 151 +#define TEGRA264_CLK_PLLC0 152 +#define TEGRA264_CLK_NAFLL_BPMP 153 +#define TEGRA264_CLK_PLLP_OUT_PDIV 154 +#define TEGRA264_CLK_DISP_ROOT 155 +#define TEGRA264_CLK_ADSP 156 +#define TEGRA264_CLK_PLLA 157 +#define TEGRA264_CLK_PLLA1 158 +#define TEGRA264_CLK_PLLA1_OUT1 159 +#define TEGRA264_CLK_PLLAON 160 +#define TEGRA264_CLK_PLLAON_APE 161 +#define TEGRA264_CLK_PLLA_OUT0 162 +#define TEGRA264_CLK_AHUB 163 +#define TEGRA264_CLK_APE 164 +#define TEGRA264_CLK_I2S1_SCLK_IN 165 +#define TEGRA264_CLK_I2S2_SCLK_IN 166 +#define TEGRA264_CLK_I2S3_SCLK_IN 167 +#define TEGRA264_CLK_I2S4_SCLK_IN 168 +#define TEGRA264_CLK_I2S5_SCLK_IN 169 +#define TEGRA264_CLK_I2S6_SCLK_IN 170 +#define TEGRA264_CLK_I2S7_SCLK_IN 171 +#define TEGRA264_CLK_I2S8_SCLK_IN 172 +#define TEGRA264_CLK_I2S9_SCLK_IN 173 +#define TEGRA264_CLK_I2S1_AUDIO_SYNC 174 +#define TEGRA264_CLK_I2S2_AUDIO_SYNC 175 +#define TEGRA264_CLK_I2S3_AUDIO_SYNC 176 +#define TEGRA264_CLK_I2S4_AUDIO_SYNC 177 +#define TEGRA264_CLK_I2S5_AUDIO_SYNC 178 +#define TEGRA264_CLK_I2S6_AUDIO_SYNC 179 +#define TEGRA264_CLK_I2S7_AUDIO_SYNC 180 +#define TEGRA264_CLK_I2S8_AUDIO_SYNC 181 +#define TEGRA264_CLK_DMIC1_AUDIO_SYNC 182 +#define TEGRA264_CLK_DSPK1_AUDIO_SYNC 183 +#define TEGRA264_CLK_I2S1 184 +#define TEGRA264_CLK_I2S2 185 +#define TEGRA264_CLK_I2S3 186 +#define TEGRA264_CLK_I2S4 187 +#define TEGRA264_CLK_I2S5 188 +#define TEGRA264_CLK_I2S6 189 +#define TEGRA264_CLK_I2S7 190 +#define TEGRA264_CLK_I2S8 191 +#define TEGRA264_CLK_I2S9 192 +#define TEGRA264_CLK_DMIC1 193 +#define TEGRA264_CLK_DMIC5 194 +#define TEGRA264_CLK_DSPK1 195 +#define TEGRA264_CLK_AON_CPU 196 +#define TEGRA264_CLK_AON_NIC 197 +#define TEGRA264_CLK_BPMP 198 +#define TEGRA264_CLK_AXI_CBB 199 +#define TEGRA264_CLK_FUSE 200 +#define TEGRA264_CLK_TSENSE 201 +#define TEGRA264_CLK_CSITE 202 +#define TEGRA264_CLK_HCSITE 203 +#define TEGRA264_CLK_DBGAPB 204 +#define TEGRA264_CLK_LA 205 +#define TEGRA264_CLK_PLLREFGP 206 +#define TEGRA264_CLK_PLLE0 207 +#define TEGRA264_CLK_UPHY0_PLL0_XDIG 208 +#define TEGRA264_CLK_EQOS_APP 209 +#define TEGRA264_CLK_EQOS_MAC 210 +#define TEGRA264_CLK_EQOS_MACSEC 211 +#define TEGRA264_CLK_EQOS_TX_PCS 212 +#define TEGRA264_CLK_MGBES_PTP_REF 213 +#define TEGRA264_CLK_MGBE0_UPHY1_PLL_XDIG 214 +#define TEGRA264_CLK_MGBE0_TX_PCS 215 +#define TEGRA264_CLK_MGBE0_MAC 216 +#define TEGRA264_CLK_MGBE0_MACSEC 217 +#define TEGRA264_CLK_MGBE0_APP 218 +#define TEGRA264_CLK_MGBE1_UPHY1_PLL_XDIG 219 +#define TEGRA264_CLK_MGBE1_TX_PCS 220 +#define TEGRA264_CLK_MGBE1_MAC 221 +#define TEGRA264_CLK_MGBE1_MACSEC 222 +#define TEGRA264_CLK_MGBE1_APP 223 +#define TEGRA264_CLK_MGBE2_UPHY1_PLL_XDIG 224 +#define TEGRA264_CLK_MGBE2_TX_PCS 225 +#define TEGRA264_CLK_MGBE2_MAC 226 +#define TEGRA264_CLK_MGBE2_MACSEC 227 +#define TEGRA264_CLK_MGBE2_APP 228 +#define TEGRA264_CLK_MGBE3_UPHY1_PLL_XDIG 229 +#define TEGRA264_CLK_MGBE3_TX_PCS 230 +#define TEGRA264_CLK_MGBE3_MAC 231 +#define TEGRA264_CLK_MGBE3_MACSEC 232 +#define TEGRA264_CLK_MGBE3_APP 233 +#define TEGRA264_CLK_PLLREFUFS 234 +#define TEGRA264_CLK_PLLREFUFS_CLKOUT624 235 +#define TEGRA264_CLK_PLLREFUFS_REFCLKOUT 236 +#define TEGRA264_CLK_PLLREFUFS_UFSDEV_REFCLKOUT 237 +#define TEGRA264_CLK_UFSHC_CG_SYS 238 +#define TEGRA264_CLK_MPHY_L0_RX_LS_BIT_DIV 239 +#define TEGRA264_CLK_MPHY_L0_RX_LS_BIT 240 +#define TEGRA264_CLK_MPHY_L0_RX_LS_SYMB_DIV 241 +#define TEGRA264_CLK_MPHY_L0_RX_HS_SYMB_DIV 242 +#define TEGRA264_CLK_MPHY_L0_RX_SYMB 243 +#define TEGRA264_CLK_MPHY_L0_UPHY_TX_FIFO 244 +#define TEGRA264_CLK_MPHY_L0_TX_LS_3XBIT_DIV 245 +#define TEGRA264_CLK_MPHY_L0_TX_LS_SYMB_DIV 246 +#define TEGRA264_CLK_UPHY0_PLL4_XDIG 247 +#define TEGRA264_CLK_MPHY_L0_TX_HS_SYMB_DIV 248 +#define TEGRA264_CLK_MPHY_L0_TX_SYMB 249 +#define TEGRA264_CLK_MPHY_L0_TX_LS_3XBIT 250 +#define TEGRA264_CLK_MPHY_L0_RX_ANA 251 +#define TEGRA264_CLK_MPHY_L1_RX_ANA 252 +#define TEGRA264_CLK_MPHY_TX_1MHZ_REF 253 +#define TEGRA264_CLK_MPHY_CORE_PLL_FIXED 254 +#define TEGRA264_CLK_MPHY_IOBIST 255 +#define TEGRA264_CLK_UFSHC_CG_SYS_DIV 256 +#define TEGRA264_CLK_XUSB1_CORE 257 +#define TEGRA264_CLK_XUSB1_FALCON 258 +#define TEGRA264_CLK_XUSB1_FS 259 +#define TEGRA264_CLK_XUSB1_SS 260 +#define TEGRA264_CLK_UPHY0_USB_P0_RX_CORE 261 +#define TEGRA264_CLK_UPHY0_USB_P1_RX_CORE 262 +#define TEGRA264_CLK_UPHY0_USB_P2_RX_CORE 263 +#define TEGRA264_CLK_UPHY0_USB_P3_RX_CORE 264 +#define TEGRA264_CLK_XUSB1_CLK480M_NVWRAP_CORE 265 +#define TEGRA264_CLK_XUSB1_CORE_HOST 266 +#define TEGRA264_CLK_XUSB1_CORE_DEV 267 +#define TEGRA264_CLK_XUSB1_CORE_SUPERSPEED 268 +#define TEGRA264_CLK_XUSB1_FALCON_HOST 269 +#define TEGRA264_CLK_XUSB1_FALCON_SUPERSPEED 270 +#define TEGRA264_CLK_XUSB1_FS_HOST 271 +#define TEGRA264_CLK_XUSB1_FS_DEV 272 +#define TEGRA264_CLK_XUSB1_HS_HSICP 273 +#define TEGRA264_CLK_XUSB1_SS_DEV 274 +#define TEGRA264_CLK_XUSB1_SS_SUPERSPEED 275 +#define TEGRA264_CLK_AON_TOUCH 276 +#define TEGRA264_CLK_AUD_MCLK 277 +#define TEGRA264_CLK_EXTPERIPH1 278 +#define TEGRA264_CLK_EXTPERIPH2 279 +#define TEGRA264_CLK_EXTPERIPH3 280 +#define TEGRA264_CLK_EXTPERIPH4 281 +#define TEGRA264_CLK_JTAG_REG_UNGATED 282 +#define TEGRA264_CLK_IST_BUS 283 +#define TEGRA264_CLK_IST_BUS_RIST_MCC 284 +#define TEGRA264_CLK_MATHS_SEC_RIST 285 +#define TEGRA264_CLK_NAFLL_IST 286 +#define TEGRA264_CLK_RIST_ROOT 287 +#define TEGRA264_CLK_IST_CONTROLLER_RIST 288 +#define TEGRA264_CLK_MSS_ENCRYPT 289 +#define TEGRA264_CLK_EMC 290 +#define TEGRA264_CLK_SPPLL0_CLKOUT100 291 +#define TEGRA264_CLK_SPPLL0_CLKOUT270 292 +#define TEGRA264_CLK_SPPLL1_CLKOUT100 293 +#define TEGRA264_CLK_SPPLL1_CLKOUT270 294 +#define TEGRA264_CLK_DP_LINKA_REF 295 +#define TEGRA264_CLK_DP_LINKB_REF 296 +#define TEGRA264_CLK_DP_LINKC_REF 297 +#define TEGRA264_CLK_DP_LINKD_REF 298 +#define TEGRA264_CLK_PLLNVCSI 299 +#define TEGRA264_CLK_PLLBPMPCAM 300 +#define TEGRA264_CLK_UTMI_PLL1 301 +#define TEGRA264_CLK_UTMI_PLL1_CLKOUT48 302 +#define TEGRA264_CLK_UTMI_PLL1_CLKOUT60 303 +#define TEGRA264_CLK_UTMI_PLL1_CLKOUT480 304 +#define TEGRA264_CLK_NAFLL_ISP 305 +#define TEGRA264_CLK_NAFLL_RCE 306 +#define TEGRA264_CLK_NAFLL_RCE1 307 +#define TEGRA264_CLK_NAFLL_SE 308 +#define TEGRA264_CLK_NAFLL_VI 309 +#define TEGRA264_CLK_NAFLL_VIC 310 +#define TEGRA264_CLK_NAFLL_DCE 311 +#define TEGRA264_CLK_NAFLL_TSEC 312 +#define TEGRA264_CLK_NAFLL_CPAIR0 313 +#define TEGRA264_CLK_NAFLL_CPAIR1 314 +#define TEGRA264_CLK_NAFLL_CPAIR2 315 +#define TEGRA264_CLK_NAFLL_CPAIR3 316 +#define TEGRA264_CLK_NAFLL_CPAIR4 317 +#define TEGRA264_CLK_NAFLL_CPAIR5 318 +#define TEGRA264_CLK_NAFLL_CPAIR6 319 +#define TEGRA264_CLK_NAFLL_GPU_SYS 320 +#define TEGRA264_CLK_NAFLL_GPU_NVD 321 +#define TEGRA264_CLK_NAFLL_GPU_UPROC 322 +#define TEGRA264_CLK_NAFLL_GPU_GPC0 323 +#define TEGRA264_CLK_NAFLL_GPU_GPC1 324 +#define TEGRA264_CLK_NAFLL_GPU_GPC2 325 +#define TEGRA264_CLK_SOR_LINKA_INPUT 326 +#define TEGRA264_CLK_SOR_LINKB_INPUT 327 +#define TEGRA264_CLK_SOR_LINKC_INPUT 328 +#define TEGRA264_CLK_SOR_LINKD_INPUT 329 +#define TEGRA264_CLK_SOR_LINKA_AFIFO 330 +#define TEGRA264_CLK_SOR_LINKB_AFIFO 331 +#define TEGRA264_CLK_SOR_LINKC_AFIFO 332 +#define TEGRA264_CLK_SOR_LINKD_AFIFO 333 +#define TEGRA264_CLK_I2S1_PAD_M 334 +#define TEGRA264_CLK_I2S2_PAD_M 335 +#define TEGRA264_CLK_I2S3_PAD_M 336 +#define TEGRA264_CLK_I2S4_PAD_M 337 +#define TEGRA264_CLK_I2S5_PAD_M 338 +#define TEGRA264_CLK_I2S6_PAD_M 339 +#define TEGRA264_CLK_I2S7_PAD_M 340 +#define TEGRA264_CLK_I2S8_PAD_M 341 +#define TEGRA264_CLK_I2S9_PAD_M 342 +#define TEGRA264_CLK_BPMP_NIC 343 +#define TEGRA264_CLK_CLK1M 344 +#define TEGRA264_CLK_RDET 345 +#define TEGRA264_CLK_ADC_SOC_REF 346 +#define TEGRA264_CLK_UPHY0_PLL0_TXREF 347 +#define TEGRA264_CLK_EQOS_TX 348 +#define TEGRA264_CLK_EQOS_TX_M 349 +#define TEGRA264_CLK_EQOS_RX_PCS_IN 350 +#define TEGRA264_CLK_EQOS_RX_PCS_M 351 +#define TEGRA264_CLK_EQOS_RX_IN 352 +#define TEGRA264_CLK_EQOS_RX 353 +#define TEGRA264_CLK_EQOS_RX_M 354 +#define TEGRA264_CLK_MGBE0_UPHY1_PLL_TXREF 355 +#define TEGRA264_CLK_MGBE0_TX 356 +#define TEGRA264_CLK_MGBE0_TX_M 357 +#define TEGRA264_CLK_MGBE0_RX_PCS_IN 358 +#define TEGRA264_CLK_MGBE0_RX_PCS_M 359 +#define TEGRA264_CLK_MGBE0_RX_IN 360 +#define TEGRA264_CLK_MGBE0_RX_M 361 +#define TEGRA264_CLK_MGBE1_UPHY1_PLL_TXREF 362 +#define TEGRA264_CLK_MGBE1_TX 363 +#define TEGRA264_CLK_MGBE1_TX_M 364 +#define TEGRA264_CLK_MGBE1_RX_PCS_IN 365 +#define TEGRA264_CLK_MGBE1_RX_PCS_M 366 +#define TEGRA264_CLK_MGBE1_RX_IN 367 +#define TEGRA264_CLK_MGBE1_RX_M 368 +#define TEGRA264_CLK_MGBE2_UPHY1_PLL_TXREF 369 +#define TEGRA264_CLK_MGBE2_TX 370 +#define TEGRA264_CLK_MGBE2_TX_M 371 +#define TEGRA264_CLK_MGBE2_RX_PCS_IN 372 +#define TEGRA264_CLK_MGBE2_RX_PCS_M 373 +#define TEGRA264_CLK_MGBE2_RX_IN 374 +#define TEGRA264_CLK_MGBE2_RX_M 375 +#define TEGRA264_CLK_MGBE3_UPHY1_PLL_TXREF 376 +#define TEGRA264_CLK_MGBE3_TX 377 +#define TEGRA264_CLK_MGBE3_TX_M 378 +#define TEGRA264_CLK_MGBE3_RX_PCS_IN 379 +#define TEGRA264_CLK_MGBE3_RX_PCS_M 380 +#define TEGRA264_CLK_MGBE3_RX_IN 381 +#define TEGRA264_CLK_MGBE3_RX_M 382 +#define TEGRA264_CLK_UPHY0_USB_P0_TX_CORE 383 +#define TEGRA264_CLK_UPHY0_USB_P1_TX_CORE 384 +#define TEGRA264_CLK_UPHY0_USB_P2_TX_CORE 385 +#define TEGRA264_CLK_UPHY0_USB_P3_TX_CORE 386 +#define TEGRA264_CLK_UPHY0_USB_P0_TX 387 +#define TEGRA264_CLK_UPHY0_USB_P1_TX 388 +#define TEGRA264_CLK_UPHY0_USB_P2_TX 389 +#define TEGRA264_CLK_UPHY0_USB_P3_TX 390 +#define TEGRA264_CLK_UPHY0_USB_P0_RX_IN 391 +#define TEGRA264_CLK_UPHY0_USB_P1_RX_IN 392 +#define TEGRA264_CLK_UPHY0_USB_P2_RX_IN 393 +#define TEGRA264_CLK_UPHY0_USB_P3_RX_IN 394 +#define TEGRA264_CLK_UPHY0_USB_P0_RX_M 395 +#define TEGRA264_CLK_UPHY0_USB_P1_RX_M 396 +#define TEGRA264_CLK_UPHY0_USB_P2_RX_M 397 +#define TEGRA264_CLK_UPHY0_USB_P3_RX_M 398 +#define TEGRA264_CLK_UPHY0_LANE0_TX_M 399 +#define TEGRA264_CLK_PCIE_C1_XCLK_NOBG_M 400 +#define TEGRA264_CLK_PCIE_C2_XCLK_NOBG_M 401 +#define TEGRA264_CLK_PCIE_C3_XCLK_NOBG_M 402 +#define TEGRA264_CLK_PCIE_C4_XCLK_NOBG_M 403 +#define TEGRA264_CLK_PCIE_C5_XCLK_NOBG_M 404 +#define TEGRA264_CLK_PCIE_C1_L0_RX_M 405 +#define TEGRA264_CLK_PCIE_C1_L1_RX_M 406 +#define TEGRA264_CLK_PCIE_C1_L2_RX_M 407 +#define TEGRA264_CLK_PCIE_C1_L3_RX_M 408 +#define TEGRA264_CLK_PCIE_C2_L0_RX_M 409 +#define TEGRA264_CLK_PCIE_C2_L1_RX_M 410 +#define TEGRA264_CLK_PCIE_C2_L2_RX_M 411 +#define TEGRA264_CLK_PCIE_C2_L3_RX_M 412 +#define TEGRA264_CLK_PCIE_C3_L0_RX_M 413 +#define TEGRA264_CLK_PCIE_C3_L1_RX_M 414 +#define TEGRA264_CLK_PCIE_C4_L0_RX_M 415 +#define TEGRA264_CLK_PCIE_C4_L1_RX_M 416 +#define TEGRA264_CLK_PCIE_C4_L2_RX_M 417 +#define TEGRA264_CLK_PCIE_C4_L3_RX_M 418 +#define TEGRA264_CLK_PCIE_C4_L4_RX_M 419 +#define TEGRA264_CLK_PCIE_C4_L5_RX_M 420 +#define TEGRA264_CLK_PCIE_C4_L6_RX_M 421 +#define TEGRA264_CLK_PCIE_C4_L7_RX_M 422 +#define TEGRA264_CLK_PCIE_C5_L0_RX_M 423 +#define TEGRA264_CLK_PCIE_C5_L1_RX_M 424 +#define TEGRA264_CLK_PCIE_C5_L2_RX_M 425 +#define TEGRA264_CLK_PCIE_C5_L3_RX_M 426 +#define TEGRA264_CLK_MPHY_L0_RX_PWM_BIT_M 427 +#define TEGRA264_CLK_MPHY_L1_RX_PWM_BIT_M 428 +#define TEGRA264_CLK_DBB_UPHY0 429 +#define TEGRA264_CLK_UPHY0_UXL_CORE 430 +#define TEGRA264_CLK_ISC_CPU_ROOT 431 +#define TEGRA264_CLK_ISC_NIC 432 +#define TEGRA264_CLK_CTC_TXCLK0_M 433 +#define TEGRA264_CLK_CTC_TXCLK1_M 434 +#define TEGRA264_CLK_CTC_RXCLK0_M 435 +#define TEGRA264_CLK_CTC_RXCLK1_M 436 +#define TEGRA264_CLK_PLLREFGP_OUT 437 +#define TEGRA264_CLK_PLLREFGP_OUT1 438 +#define TEGRA264_CLK_GPU_SYS 439 +#define TEGRA264_CLK_GPU_NVD 440 +#define TEGRA264_CLK_GPU_UPROC 441 +#define TEGRA264_CLK_GPU_GPC0 442 +#define TEGRA264_CLK_GPU_GPC1 443 +#define TEGRA264_CLK_GPU_GPC2 444 +#define TEGRA264_CLK_PLLX 445 +#define TEGRA264_CLK_APE_SOUNDWIRE_MSRC0 446 +#define TEGRA264_CLK_APE_SOUNDWIRE_DATA_EN_SHAPER 447 +#define TEGRA264_CLK_AO_SOUNDWIRE_MSRC0 448 +#define TEGRA264_CLK_AO_SOUNDWIRE_DATA_EN_SHAPER 449 +#define TEGRA264_CLK_MGBE0_TX_SER 459 +#define TEGRA264_CLK_MGBE1_TX_SER 460 +#define TEGRA264_CLK_MGBE2_TX_SER 461 +#define TEGRA264_CLK_MGBE3_TX_SER 462 +#define TEGRA264_CLK_MGBE0_RX_SER 463 +#define TEGRA264_CLK_MGBE1_RX_SER 464 +#define TEGRA264_CLK_MGBE2_RX_SER 465 +#define TEGRA264_CLK_MGBE3_RX_SER 466 +#define TEGRA264_CLK_DPAUX 467 + +#endif /* DT_BINDINGS_CLOCK_NVIDIA_TEGRA264_H */ diff --git a/include/dt-bindings/clock/qcom,gcc-sc8180x.h b/include/dt-bindings/clock/qcom,gcc-sc8180x.h index e364006aa6ea..b9d8438a15ff 100644 --- a/include/dt-bindings/clock/qcom,gcc-sc8180x.h +++ b/include/dt-bindings/clock/qcom,gcc-sc8180x.h @@ -249,6 +249,16 @@ #define GCC_UFS_MEM_CLKREF_EN 239 #define GCC_UFS_CARD_CLKREF_EN 240 #define GPLL9 241 +#define GCC_CAMERA_AHB_CLK 242 +#define GCC_CAMERA_XO_CLK 243 +#define GCC_CPUSS_DVM_BUS_CLK 244 +#define GCC_CPUSS_GNOC_CLK 245 +#define GCC_DISP_AHB_CLK 246 +#define GCC_DISP_XO_CLK 247 +#define GCC_GPU_CFG_AHB_CLK 248 +#define GCC_NPU_CFG_AHB_CLK 249 +#define GCC_VIDEO_AHB_CLK 250 +#define GCC_VIDEO_XO_CLK 251 #define GCC_EMAC_BCR 0 #define GCC_GPU_BCR 1 diff --git a/include/dt-bindings/clock/qcom,sc8180x-camcc.h b/include/dt-bindings/clock/qcom,sc8180x-camcc.h new file mode 100644 index 000000000000..3e57b80f65e8 --- /dev/null +++ b/include/dt-bindings/clock/qcom,sc8180x-camcc.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SC8180X_H +#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SC8180X_H + +/* CAM_CC clocks */ +#define CAM_CC_BPS_AHB_CLK 0 +#define CAM_CC_BPS_AREG_CLK 1 +#define CAM_CC_BPS_AXI_CLK 2 +#define CAM_CC_BPS_CLK 3 +#define CAM_CC_BPS_CLK_SRC 4 +#define CAM_CC_CAMNOC_AXI_CLK 5 +#define CAM_CC_CAMNOC_AXI_CLK_SRC 6 +#define CAM_CC_CAMNOC_DCD_XO_CLK 7 +#define CAM_CC_CCI_0_CLK 8 +#define CAM_CC_CCI_0_CLK_SRC 9 +#define CAM_CC_CCI_1_CLK 10 +#define CAM_CC_CCI_1_CLK_SRC 11 +#define CAM_CC_CCI_2_CLK 12 +#define CAM_CC_CCI_2_CLK_SRC 13 +#define CAM_CC_CCI_3_CLK 14 +#define CAM_CC_CCI_3_CLK_SRC 15 +#define CAM_CC_CORE_AHB_CLK 16 +#define CAM_CC_CPAS_AHB_CLK 17 +#define CAM_CC_CPHY_RX_CLK_SRC 18 +#define CAM_CC_CSI0PHYTIMER_CLK 19 +#define CAM_CC_CSI0PHYTIMER_CLK_SRC 20 +#define CAM_CC_CSI1PHYTIMER_CLK 21 +#define CAM_CC_CSI1PHYTIMER_CLK_SRC 22 +#define CAM_CC_CSI2PHYTIMER_CLK 23 +#define CAM_CC_CSI2PHYTIMER_CLK_SRC 24 +#define CAM_CC_CSI3PHYTIMER_CLK 25 +#define CAM_CC_CSI3PHYTIMER_CLK_SRC 26 +#define CAM_CC_CSIPHY0_CLK 27 +#define CAM_CC_CSIPHY1_CLK 28 +#define CAM_CC_CSIPHY2_CLK 29 +#define CAM_CC_CSIPHY3_CLK 30 +#define CAM_CC_FAST_AHB_CLK_SRC 31 +#define CAM_CC_FD_CORE_CLK 32 +#define CAM_CC_FD_CORE_CLK_SRC 33 +#define CAM_CC_FD_CORE_UAR_CLK 34 +#define CAM_CC_ICP_AHB_CLK 35 +#define CAM_CC_ICP_CLK 36 +#define CAM_CC_ICP_CLK_SRC 37 +#define CAM_CC_IFE_0_AXI_CLK 38 +#define CAM_CC_IFE_0_CLK 39 +#define CAM_CC_IFE_0_CLK_SRC 40 +#define CAM_CC_IFE_0_CPHY_RX_CLK 41 +#define CAM_CC_IFE_0_CSID_CLK 42 +#define CAM_CC_IFE_0_CSID_CLK_SRC 43 +#define CAM_CC_IFE_0_DSP_CLK 44 +#define CAM_CC_IFE_1_AXI_CLK 45 +#define CAM_CC_IFE_1_CLK 46 +#define CAM_CC_IFE_1_CLK_SRC 47 +#define CAM_CC_IFE_1_CPHY_RX_CLK 48 +#define CAM_CC_IFE_1_CSID_CLK 49 +#define CAM_CC_IFE_1_CSID_CLK_SRC 50 +#define CAM_CC_IFE_1_DSP_CLK 51 +#define CAM_CC_IFE_2_AXI_CLK 52 +#define CAM_CC_IFE_2_CLK 53 +#define CAM_CC_IFE_2_CLK_SRC 54 +#define CAM_CC_IFE_2_CPHY_RX_CLK 55 +#define CAM_CC_IFE_2_CSID_CLK 56 +#define CAM_CC_IFE_2_CSID_CLK_SRC 57 +#define CAM_CC_IFE_2_DSP_CLK 58 +#define CAM_CC_IFE_3_AXI_CLK 59 +#define CAM_CC_IFE_3_CLK 60 +#define CAM_CC_IFE_3_CLK_SRC 61 +#define CAM_CC_IFE_3_CPHY_RX_CLK 62 +#define CAM_CC_IFE_3_CSID_CLK 63 +#define CAM_CC_IFE_3_CSID_CLK_SRC 64 +#define CAM_CC_IFE_3_DSP_CLK 65 +#define CAM_CC_IFE_LITE_0_CLK 66 +#define CAM_CC_IFE_LITE_0_CLK_SRC 67 +#define CAM_CC_IFE_LITE_0_CPHY_RX_CLK 68 +#define CAM_CC_IFE_LITE_0_CSID_CLK 69 +#define CAM_CC_IFE_LITE_0_CSID_CLK_SRC 70 +#define CAM_CC_IFE_LITE_1_CLK 71 +#define CAM_CC_IFE_LITE_1_CLK_SRC 72 +#define CAM_CC_IFE_LITE_1_CPHY_RX_CLK 73 +#define CAM_CC_IFE_LITE_1_CSID_CLK 74 +#define CAM_CC_IFE_LITE_1_CSID_CLK_SRC 75 +#define CAM_CC_IFE_LITE_2_CLK 76 +#define CAM_CC_IFE_LITE_2_CLK_SRC 77 +#define CAM_CC_IFE_LITE_2_CPHY_RX_CLK 78 +#define CAM_CC_IFE_LITE_2_CSID_CLK 79 +#define CAM_CC_IFE_LITE_2_CSID_CLK_SRC 80 +#define CAM_CC_IFE_LITE_3_CLK 81 +#define CAM_CC_IFE_LITE_3_CLK_SRC 82 +#define CAM_CC_IFE_LITE_3_CPHY_RX_CLK 83 +#define CAM_CC_IFE_LITE_3_CSID_CLK 84 +#define CAM_CC_IFE_LITE_3_CSID_CLK_SRC 85 +#define CAM_CC_IPE_0_AHB_CLK 86 +#define CAM_CC_IPE_0_AREG_CLK 87 +#define CAM_CC_IPE_0_AXI_CLK 88 +#define CAM_CC_IPE_0_CLK 89 +#define CAM_CC_IPE_0_CLK_SRC 90 +#define CAM_CC_IPE_1_AHB_CLK 91 +#define CAM_CC_IPE_1_AREG_CLK 92 +#define CAM_CC_IPE_1_AXI_CLK 93 +#define CAM_CC_IPE_1_CLK 94 +#define CAM_CC_JPEG_CLK 95 +#define CAM_CC_JPEG_CLK_SRC 96 +#define CAM_CC_LRME_CLK 97 +#define CAM_CC_LRME_CLK_SRC 98 +#define CAM_CC_MCLK0_CLK 99 +#define CAM_CC_MCLK0_CLK_SRC 100 +#define CAM_CC_MCLK1_CLK 101 +#define CAM_CC_MCLK1_CLK_SRC 102 +#define CAM_CC_MCLK2_CLK 103 +#define CAM_CC_MCLK2_CLK_SRC 104 +#define CAM_CC_MCLK3_CLK 105 +#define CAM_CC_MCLK3_CLK_SRC 106 +#define CAM_CC_MCLK4_CLK 107 +#define CAM_CC_MCLK4_CLK_SRC 108 +#define CAM_CC_MCLK5_CLK 109 +#define CAM_CC_MCLK5_CLK_SRC 110 +#define CAM_CC_MCLK6_CLK 111 +#define CAM_CC_MCLK6_CLK_SRC 112 +#define CAM_CC_MCLK7_CLK 113 +#define CAM_CC_MCLK7_CLK_SRC 114 +#define CAM_CC_PLL0 115 +#define CAM_CC_PLL0_OUT_EVEN 116 +#define CAM_CC_PLL0_OUT_ODD 117 +#define CAM_CC_PLL1 118 +#define CAM_CC_PLL2 119 +#define CAM_CC_PLL2_OUT_MAIN 120 +#define CAM_CC_PLL3 121 +#define CAM_CC_PLL4 122 +#define CAM_CC_PLL5 123 +#define CAM_CC_PLL6 124 +#define CAM_CC_SLOW_AHB_CLK_SRC 125 +#define CAM_CC_XO_CLK_SRC 126 + + +/* CAM_CC power domains */ +#define BPS_GDSC 0 +#define IFE_0_GDSC 1 +#define IFE_1_GDSC 2 +#define IFE_2_GDSC 3 +#define IFE_3_GDSC 4 +#define IPE_0_GDSC 5 +#define IPE_1_GDSC 6 +#define TITAN_TOP_GDSC 7 + +/* CAM_CC resets */ +#define CAM_CC_BPS_BCR 0 +#define CAM_CC_CAMNOC_BCR 1 +#define CAM_CC_CCI_BCR 2 +#define CAM_CC_CPAS_BCR 3 +#define CAM_CC_CSI0PHY_BCR 4 +#define CAM_CC_CSI1PHY_BCR 5 +#define CAM_CC_CSI2PHY_BCR 6 +#define CAM_CC_CSI3PHY_BCR 7 +#define CAM_CC_FD_BCR 8 +#define CAM_CC_ICP_BCR 9 +#define CAM_CC_IFE_0_BCR 10 +#define CAM_CC_IFE_1_BCR 11 +#define CAM_CC_IFE_2_BCR 12 +#define CAM_CC_IFE_3_BCR 13 +#define CAM_CC_IFE_LITE_0_BCR 14 +#define CAM_CC_IFE_LITE_1_BCR 15 +#define CAM_CC_IFE_LITE_2_BCR 16 +#define CAM_CC_IFE_LITE_3_BCR 17 +#define CAM_CC_IPE_0_BCR 18 +#define CAM_CC_IPE_1_BCR 19 +#define CAM_CC_JPEG_BCR 20 +#define CAM_CC_LRME_BCR 21 +#define CAM_CC_MCLK0_BCR 22 +#define CAM_CC_MCLK1_BCR 23 +#define CAM_CC_MCLK2_BCR 24 +#define CAM_CC_MCLK3_BCR 25 +#define CAM_CC_MCLK4_BCR 26 +#define CAM_CC_MCLK5_BCR 27 +#define CAM_CC_MCLK6_BCR 28 +#define CAM_CC_MCLK7_BCR 29 + +#endif diff --git a/include/dt-bindings/clock/raspberrypi,rp1-clocks.h b/include/dt-bindings/clock/raspberrypi,rp1-clocks.h new file mode 100644 index 000000000000..248efb895f35 --- /dev/null +++ b/include/dt-bindings/clock/raspberrypi,rp1-clocks.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2021 Raspberry Pi Ltd. + */ + +#ifndef __DT_BINDINGS_CLOCK_RASPBERRYPI_RP1 +#define __DT_BINDINGS_CLOCK_RASPBERRYPI_RP1 + +#define RP1_PLL_SYS_CORE 0 +#define RP1_PLL_AUDIO_CORE 1 +#define RP1_PLL_VIDEO_CORE 2 + +#define RP1_PLL_SYS 3 +#define RP1_PLL_AUDIO 4 +#define RP1_PLL_VIDEO 5 + +#define RP1_PLL_SYS_PRI_PH 6 +#define RP1_PLL_SYS_SEC_PH 7 +#define RP1_PLL_AUDIO_PRI_PH 8 + +#define RP1_PLL_SYS_SEC 9 +#define RP1_PLL_AUDIO_SEC 10 +#define RP1_PLL_VIDEO_SEC 11 + +#define RP1_CLK_SYS 12 +#define RP1_CLK_SLOW_SYS 13 +#define RP1_CLK_DMA 14 +#define RP1_CLK_UART 15 +#define RP1_CLK_ETH 16 +#define RP1_CLK_PWM0 17 +#define RP1_CLK_PWM1 18 +#define RP1_CLK_AUDIO_IN 19 +#define RP1_CLK_AUDIO_OUT 20 +#define RP1_CLK_I2S 21 +#define RP1_CLK_MIPI0_CFG 22 +#define RP1_CLK_MIPI1_CFG 23 +#define RP1_CLK_PCIE_AUX 24 +#define RP1_CLK_USBH0_MICROFRAME 25 +#define RP1_CLK_USBH1_MICROFRAME 26 +#define RP1_CLK_USBH0_SUSPEND 27 +#define RP1_CLK_USBH1_SUSPEND 28 +#define RP1_CLK_ETH_TSU 29 +#define RP1_CLK_ADC 30 +#define RP1_CLK_SDIO_TIMER 31 +#define RP1_CLK_SDIO_ALT_SRC 32 +#define RP1_CLK_GP0 33 +#define RP1_CLK_GP1 34 +#define RP1_CLK_GP2 35 +#define RP1_CLK_GP3 36 +#define RP1_CLK_GP4 37 +#define RP1_CLK_GP5 38 +#define RP1_CLK_VEC 39 +#define RP1_CLK_DPI 40 +#define RP1_CLK_MIPI0_DPI 41 +#define RP1_CLK_MIPI1_DPI 42 + +/* Extra PLL output channels - RP1B0 only */ +#define RP1_PLL_VIDEO_PRI_PH 43 +#define RP1_PLL_AUDIO_TERN 44 + +#endif diff --git a/include/dt-bindings/clock/renesas,r9a09g056-cpg.h b/include/dt-bindings/clock/renesas,r9a09g056-cpg.h index f4905b27f8d9..a9af5af9e3a1 100644 --- a/include/dt-bindings/clock/renesas,r9a09g056-cpg.h +++ b/include/dt-bindings/clock/renesas,r9a09g056-cpg.h @@ -20,5 +20,6 @@ #define R9A09G056_USB2_0_CLK_CORE0 9 #define R9A09G056_GBETH_0_CLK_PTP_REF_I 10 #define R9A09G056_GBETH_1_CLK_PTP_REF_I 11 +#define R9A09G056_SPI_CLK_SPI 12 #endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G056_CPG_H__ */ diff --git a/include/dt-bindings/clock/renesas,r9a09g057-cpg.h b/include/dt-bindings/clock/renesas,r9a09g057-cpg.h index 884dbeb1e139..5346a898ab60 100644 --- a/include/dt-bindings/clock/renesas,r9a09g057-cpg.h +++ b/include/dt-bindings/clock/renesas,r9a09g057-cpg.h @@ -21,5 +21,6 @@ #define R9A09G057_USB2_0_CLK_CORE1 10 #define R9A09G057_GBETH_0_CLK_PTP_REF_I 11 #define R9A09G057_GBETH_1_CLK_PTP_REF_I 12 +#define R9A09G057_SPI_CLK_SPI 13 #endif /* __DT_BINDINGS_CLOCK_RENESAS_R9A09G057_CPG_H__ */ diff --git a/include/dt-bindings/clock/spacemit,k1-syscon.h b/include/dt-bindings/clock/spacemit,k1-syscon.h index 35968ae98246..2714c3fe66cd 100644 --- a/include/dt-bindings/clock/spacemit,k1-syscon.h +++ b/include/dt-bindings/clock/spacemit,k1-syscon.h @@ -78,6 +78,9 @@ #define CLK_APB 31 #define CLK_WDT_BUS 32 +/* MPMU resets */ +#define RESET_WDT 0 + /* APBC clocks */ #define CLK_UART0 0 #define CLK_UART2 1 @@ -180,6 +183,59 @@ #define CLK_TSEN_BUS 98 #define CLK_IPC_AP2AUD_BUS 99 +/* APBC resets */ +#define RESET_UART0 0 +#define RESET_UART2 1 +#define RESET_UART3 2 +#define RESET_UART4 3 +#define RESET_UART5 4 +#define RESET_UART6 5 +#define RESET_UART7 6 +#define RESET_UART8 7 +#define RESET_UART9 8 +#define RESET_GPIO 9 +#define RESET_PWM0 10 +#define RESET_PWM1 11 +#define RESET_PWM2 12 +#define RESET_PWM3 13 +#define RESET_PWM4 14 +#define RESET_PWM5 15 +#define RESET_PWM6 16 +#define RESET_PWM7 17 +#define RESET_PWM8 18 +#define RESET_PWM9 19 +#define RESET_PWM10 20 +#define RESET_PWM11 21 +#define RESET_PWM12 22 +#define RESET_PWM13 23 +#define RESET_PWM14 24 +#define RESET_PWM15 25 +#define RESET_PWM16 26 +#define RESET_PWM17 27 +#define RESET_PWM18 28 +#define RESET_PWM19 29 +#define RESET_SSP3 30 +#define RESET_RTC 31 +#define RESET_TWSI0 32 +#define RESET_TWSI1 33 +#define RESET_TWSI2 34 +#define RESET_TWSI4 35 +#define RESET_TWSI5 36 +#define RESET_TWSI6 37 +#define RESET_TWSI7 38 +#define RESET_TWSI8 39 +#define RESET_TIMERS1 40 +#define RESET_TIMERS2 41 +#define RESET_AIB 42 +#define RESET_ONEWIRE 43 +#define RESET_SSPA0 44 +#define RESET_SSPA1 45 +#define RESET_DRO 46 +#define RESET_IR 47 +#define RESET_TSEN 48 +#define RESET_IPC_AP2AUD 49 +#define RESET_CAN0 50 + /* APMU clocks */ #define CLK_CCI550 0 #define CLK_CPU_C0_HI 1 @@ -244,4 +300,89 @@ #define CLK_V2D 60 #define CLK_EMMC_BUS 61 +/* APMU resets */ +#define RESET_CCIC_4X 0 +#define RESET_CCIC1_PHY 1 +#define RESET_SDH_AXI 2 +#define RESET_SDH0 3 +#define RESET_SDH1 4 +#define RESET_SDH2 5 +#define RESET_USBP1_AXI 6 +#define RESET_USB_AXI 7 +#define RESET_USB30_AHB 8 +#define RESET_USB30_VCC 9 +#define RESET_USB30_PHY 10 +#define RESET_QSPI 11 +#define RESET_QSPI_BUS 12 +#define RESET_DMA 13 +#define RESET_AES 14 +#define RESET_VPU 15 +#define RESET_GPU 16 +#define RESET_EMMC 17 +#define RESET_EMMC_X 18 +#define RESET_AUDIO_SYS 19 +#define RESET_AUDIO_MCU 20 +#define RESET_AUDIO_APMU 21 +#define RESET_HDMI 22 +#define RESET_PCIE0_MASTER 23 +#define RESET_PCIE0_SLAVE 24 +#define RESET_PCIE0_DBI 25 +#define RESET_PCIE0_GLOBAL 26 +#define RESET_PCIE1_MASTER 27 +#define RESET_PCIE1_SLAVE 28 +#define RESET_PCIE1_DBI 29 +#define RESET_PCIE1_GLOBAL 30 +#define RESET_PCIE2_MASTER 31 +#define RESET_PCIE2_SLAVE 32 +#define RESET_PCIE2_DBI 33 +#define RESET_PCIE2_GLOBAL 34 +#define RESET_EMAC0 35 +#define RESET_EMAC1 36 +#define RESET_JPG 37 +#define RESET_CCIC2PHY 38 +#define RESET_CCIC3PHY 39 +#define RESET_CSI 40 +#define RESET_ISP_CPP 41 +#define RESET_ISP_BUS 42 +#define RESET_ISP 43 +#define RESET_ISP_CI 44 +#define RESET_DPU_MCLK 45 +#define RESET_DPU_ESC 46 +#define RESET_DPU_HCLK 47 +#define RESET_DPU_SPIBUS 48 +#define RESET_DPU_SPI_HBUS 49 +#define RESET_V2D 50 +#define RESET_MIPI 51 +#define RESET_MC 52 + +/* RCPU resets */ +#define RESET_RCPU_SSP0 0 +#define RESET_RCPU_I2C0 1 +#define RESET_RCPU_UART1 2 +#define RESET_RCPU_IR 3 +#define RESET_RCPU_CAN 4 +#define RESET_RCPU_UART0 5 +#define RESET_RCPU_HDMI_AUDIO 6 + +/* RCPU2 resets */ +#define RESET_RCPU2_PWM0 0 +#define RESET_RCPU2_PWM1 1 +#define RESET_RCPU2_PWM2 2 +#define RESET_RCPU2_PWM3 3 +#define RESET_RCPU2_PWM4 4 +#define RESET_RCPU2_PWM5 5 +#define RESET_RCPU2_PWM6 6 +#define RESET_RCPU2_PWM7 7 +#define RESET_RCPU2_PWM8 8 +#define RESET_RCPU2_PWM9 9 + +/* APBC2 resets */ +#define RESET_APBC2_UART1 0 +#define RESET_APBC2_SSP2 1 +#define RESET_APBC2_TWSI3 2 +#define RESET_APBC2_RTC 3 +#define RESET_APBC2_TIMERS0 4 +#define RESET_APBC2_KPC 5 +#define RESET_APBC2_GPIO 6 + #endif /* _DT_BINDINGS_SPACEMIT_CCU_H_ */ diff --git a/include/dt-bindings/memory/nvidia,tegra264.h b/include/dt-bindings/memory/nvidia,tegra264.h new file mode 100644 index 000000000000..521405c01f84 --- /dev/null +++ b/include/dt-bindings/memory/nvidia,tegra264.h @@ -0,0 +1,136 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* Copyright (c) 2025, NVIDIA CORPORATION. All rights reserved. */ + +#ifndef DT_BINDINGS_MEMORY_NVIDIA_TEGRA264_H +#define DT_BINDINGS_MEMORY_NVIDIA_TEGRA264_H + +#define TEGRA264_SID(x) ((x) << 8) + +/* + * SMMU stream IDs + */ + +#define TEGRA264_SID_AON TEGRA264_SID(0x01) +#define TEGRA264_SID_APE TEGRA264_SID(0x02) +#define TEGRA264_SID_ETR TEGRA264_SID(0x03) +#define TEGRA264_SID_BPMP TEGRA264_SID(0x04) +#define TEGRA264_SID_DCE TEGRA264_SID(0x05) +#define TEGRA264_SID_EQOS TEGRA264_SID(0x06) +#define TEGRA264_SID_GPCDMA TEGRA264_SID(0x08) +#define TEGRA264_SID_DISP TEGRA264_SID(0x09) +#define TEGRA264_SID_HDA TEGRA264_SID(0x0a) +#define TEGRA264_SID_HOST1X TEGRA264_SID(0x0b) +#define TEGRA264_SID_ISP0 TEGRA264_SID(0x0c) +#define TEGRA264_SID_ISP1 TEGRA264_SID(0x0d) +#define TEGRA264_SID_PMA0 TEGRA264_SID(0x0e) +#define TEGRA264_SID_FSI0 TEGRA264_SID(0x0f) +#define TEGRA264_SID_FSI1 TEGRA264_SID(0x10) +#define TEGRA264_SID_PVA TEGRA264_SID(0x11) +#define TEGRA264_SID_SDMMC0 TEGRA264_SID(0x12) +#define TEGRA264_SID_MGBE0 TEGRA264_SID(0x13) +#define TEGRA264_SID_MGBE1 TEGRA264_SID(0x14) +#define TEGRA264_SID_MGBE2 TEGRA264_SID(0x15) +#define TEGRA264_SID_MGBE3 TEGRA264_SID(0x16) +#define TEGRA264_SID_MSSSEQ TEGRA264_SID(0x17) +#define TEGRA264_SID_SE TEGRA264_SID(0x18) +#define TEGRA264_SID_SEU1 TEGRA264_SID(0x19) +#define TEGRA264_SID_SEU2 TEGRA264_SID(0x1a) +#define TEGRA264_SID_SEU3 TEGRA264_SID(0x1b) +#define TEGRA264_SID_PSC TEGRA264_SID(0x1c) +#define TEGRA264_SID_OESP TEGRA264_SID(0x23) +#define TEGRA264_SID_SB TEGRA264_SID(0x24) +#define TEGRA264_SID_XSPI0 TEGRA264_SID(0x25) +#define TEGRA264_SID_TSEC TEGRA264_SID(0x29) +#define TEGRA264_SID_UFS TEGRA264_SID(0x2a) +#define TEGRA264_SID_RCE TEGRA264_SID(0x2b) +#define TEGRA264_SID_RCE1 TEGRA264_SID(0x2c) +#define TEGRA264_SID_VI TEGRA264_SID(0x2e) +#define TEGRA264_SID_VI1 TEGRA264_SID(0x2f) +#define TEGRA264_SID_VIC TEGRA264_SID(0x30) +#define TEGRA264_SID_XUSB_DEV TEGRA264_SID(0x32) +#define TEGRA264_SID_XUSB_DEV1 TEGRA264_SID(0x33) +#define TEGRA264_SID_XUSB_DEV2 TEGRA264_SID(0x34) +#define TEGRA264_SID_XUSB_DEV3 TEGRA264_SID(0x35) +#define TEGRA264_SID_XUSB_DEV4 TEGRA264_SID(0x36) +#define TEGRA264_SID_XUSB_DEV5 TEGRA264_SID(0x37) + +/* + * memory client IDs + */ + +/* HOST1X read client */ +#define TEGRA264_MEMORY_CLIENT_HOST1XR 0x16 +/* VIC read client */ +#define TEGRA264_MEMORY_CLIENT_VICR 0x6c +/* VIC Write client */ +#define TEGRA264_MEMORY_CLIENT_VICW 0x6d +/* VI R5 Write client */ +#define TEGRA264_MEMORY_CLIENT_VIW 0x72 +#define TEGRA264_MEMORY_CLIENT_NVDECSRD2MC 0x78 +#define TEGRA264_MEMORY_CLIENT_NVDECSWR2MC 0x79 +/* Audio processor(APE) Read client */ +#define TEGRA264_MEMORY_CLIENT_APER 0x7a +/* Audio processor(APE) Write client */ +#define TEGRA264_MEMORY_CLIENT_APEW 0x7b +/* Audio DMA Read client */ +#define TEGRA264_MEMORY_CLIENT_APEDMAR 0x9f +/* Audio DMA Write client */ +#define TEGRA264_MEMORY_CLIENT_APEDMAW 0xa0 +#define TEGRA264_MEMORY_CLIENT_GPUR02MC 0xb6 +#define TEGRA264_MEMORY_CLIENT_GPUW02MC 0xb7 +/* VI Falcon Read client */ +#define TEGRA264_MEMORY_CLIENT_VIFALCONR 0xbc +/* VI Falcon Write client */ +#define TEGRA264_MEMORY_CLIENT_VIFALCONW 0xbd +/* Read Client of RCE */ +#define TEGRA264_MEMORY_CLIENT_RCER 0xd2 +/* Write client of RCE */ +#define TEGRA264_MEMORY_CLIENT_RCEW 0xd3 +/* PCIE0/MSI Write clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE0W 0xd9 +/* PCIE1/RPX4 Read clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE1R 0xda +/* PCIE1/RPX4 Write clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE1W 0xdb +/* PCIE2/DMX4 Read clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE2AR 0xdc +/* PCIE2/DMX4 Write clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE2AW 0xdd +/* PCIE3/RPX4 Read clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE3R 0xde +/* PCIE3/RPX4 Write clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE3W 0xdf +/* PCIE4/DMX8 Read clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE4R 0xe0 +/* PCIE4/DMX8 Write clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE4W 0xe1 +/* PCIE5/DMX4 Read clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE5R 0xe2 +/* PCIE5/DMX4 Write clients */ +#define TEGRA264_MEMORY_CLIENT_PCIE5W 0xe3 +/* UFS Read client */ +#define TEGRA264_MEMORY_CLIENT_UFSR 0x15c +/* UFS write client */ +#define TEGRA264_MEMORY_CLIENT_UFSW 0x15d +/* HDA Read client */ +#define TEGRA264_MEMORY_CLIENT_HDAR 0x17c +/* HDA Write client */ +#define TEGRA264_MEMORY_CLIENT_HDAW 0x17d +/* Disp ISO Read Client */ +#define TEGRA264_MEMORY_CLIENT_DISPR 0x182 +/* MGBE0 Read mccif */ +#define TEGRA264_MEMORY_CLIENT_MGBE0R 0x1a2 +/* MGBE0 Write mccif */ +#define TEGRA264_MEMORY_CLIENT_MGBE0W 0x1a3 +/* MGBE1 Read mccif */ +#define TEGRA264_MEMORY_CLIENT_MGBE1R 0x1a4 +/* MGBE1 Write mccif */ +#define TEGRA264_MEMORY_CLIENT_MGBE1W 0x1a5 +/* VI1 R5 Write client */ +#define TEGRA264_MEMORY_CLIENT_VI1W 0x1a6 +/* SDMMC0 Read mccif */ +#define TEGRA264_MEMORY_CLIENT_SDMMC0R 0x1c2 +/* SDMMC0 Write mccif */ +#define TEGRA264_MEMORY_CLIENT_SDMMC0W 0x1c3 + +#endif /* DT_BINDINGS_MEMORY_NVIDIA_TEGRA264_H */ diff --git a/include/dt-bindings/power/allwinner,sun55i-a523-pck-600.h b/include/dt-bindings/power/allwinner,sun55i-a523-pck-600.h new file mode 100644 index 000000000000..6b3d8ea7bb69 --- /dev/null +++ b/include/dt-bindings/power/allwinner,sun55i-a523-pck-600.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ + +#ifndef _DT_BINDINGS_POWER_SUN55I_A523_PCK600_H_ +#define _DT_BINDINGS_POWER_SUN55I_A523_PCK600_H_ + +#define PD_VE 0 +#define PD_GPU 1 +#define PD_VI 2 +#define PD_VO0 3 +#define PD_VO1 4 +#define PD_DE 5 +#define PD_NAND 6 +#define PD_PCIE 7 + +#endif /* _DT_BINDINGS_POWER_SUN55I_A523_PCK600_H_ */ diff --git a/include/dt-bindings/power/allwinner,sun55i-a523-ppu.h b/include/dt-bindings/power/allwinner,sun55i-a523-ppu.h new file mode 100644 index 000000000000..bc9aba73c19a --- /dev/null +++ b/include/dt-bindings/power/allwinner,sun55i-a523-ppu.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ + +#ifndef _DT_BINDINGS_POWER_SUN55I_A523_PPU_H_ +#define _DT_BINDINGS_POWER_SUN55I_A523_PPU_H_ + +#define PD_DSP 0 +#define PD_NPU 1 +#define PD_AUDIO 2 +#define PD_SRAM 3 +#define PD_RISCV 4 + +#endif /* _DT_BINDINGS_POWER_SUN55I_A523_PPU_H_ */ diff --git a/include/dt-bindings/power/rockchip,rk3528-power.h b/include/dt-bindings/power/rockchip,rk3528-power.h new file mode 100644 index 000000000000..318923cdaaf6 --- /dev/null +++ b/include/dt-bindings/power/rockchip,rk3528-power.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#ifndef __DT_BINDINGS_POWER_RK3528_POWER_H__ +#define __DT_BINDINGS_POWER_RK3528_POWER_H__ + +#define RK3528_PD_PMU 0 +#define RK3528_PD_BUS 1 +#define RK3528_PD_DDR 2 +#define RK3528_PD_MSCH 3 + +/* VD_GPU */ +#define RK3528_PD_GPU 4 + +/* VD_LOGIC */ +#define RK3528_PD_RKVDEC 5 +#define RK3528_PD_RKVENC 6 +#define RK3528_PD_VO 7 +#define RK3528_PD_VPU 8 + +#endif diff --git a/include/dt-bindings/regulator/st,stm32mp15-regulator.h b/include/dt-bindings/regulator/st,stm32mp15-regulator.h new file mode 100644 index 000000000000..7052507cb3e5 --- /dev/null +++ b/include/dt-bindings/regulator/st,stm32mp15-regulator.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2025, STMicroelectronics - All Rights Reserved + */ + +#ifndef __DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H +#define __DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H + +/* SCMI voltage domain identifiers */ + +/* SOC Internal regulators */ +#define VOLTD_SCMI_REG11 0 +#define VOLTD_SCMI_REG18 1 +#define VOLTD_SCMI_USB33 2 + +/* STPMIC1 regulators */ +#define VOLTD_SCMI_STPMIC1_BUCK1 3 +#define VOLTD_SCMI_STPMIC1_BUCK2 4 +#define VOLTD_SCMI_STPMIC1_BUCK3 5 +#define VOLTD_SCMI_STPMIC1_BUCK4 6 +#define VOLTD_SCMI_STPMIC1_LDO1 7 +#define VOLTD_SCMI_STPMIC1_LDO2 8 +#define VOLTD_SCMI_STPMIC1_LDO3 9 +#define VOLTD_SCMI_STPMIC1_LDO4 10 +#define VOLTD_SCMI_STPMIC1_LDO5 11 +#define VOLTD_SCMI_STPMIC1_LDO6 12 +#define VOLTD_SCMI_STPMIC1_VREFDDR 13 +#define VOLTD_SCMI_STPMIC1_BOOST 14 +#define VOLTD_SCMI_STPMIC1_PWR_SW1 15 +#define VOLTD_SCMI_STPMIC1_PWR_SW2 16 +#define VOLTD_SCMI_VREFBUF 17 + +/* External regulators */ +#define VOLTD_SCMI_REGU0 18 +#define VOLTD_SCMI_REGU1 19 +#define VOLTD_SCMI_REGU2 20 +#define VOLTD_SCMI_REGU3 21 +#define VOLTD_SCMI_REGU4 22 + +#endif /*__DT_BINDINGS_REGULATOR_ST_STM32MP15_REGULATOR_H */ diff --git a/include/dt-bindings/reset/nvidia,tegra264.h b/include/dt-bindings/reset/nvidia,tegra264.h new file mode 100644 index 000000000000..a61a56bb232b --- /dev/null +++ b/include/dt-bindings/reset/nvidia,tegra264.h @@ -0,0 +1,92 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* Copyright (c) 2022-2025, NVIDIA CORPORATION. All rights reserved. */ + +#ifndef DT_BINDINGS_RESET_NVIDIA_TEGRA264_H +#define DT_BINDINGS_RESET_NVIDIA_TEGRA264_H + +#define TEGRA264_RESET_APE_TKE 1 +#define TEGRA264_RESET_CEC 2 +#define TEGRA264_RESET_ADSP_ALL 3 +#define TEGRA264_RESET_RCE_ALL 4 +#define TEGRA264_RESET_UFSHC 5 +#define TEGRA264_RESET_UFSHC_AXI_M 6 +#define TEGRA264_RESET_UFSHC_LP_SEQ 7 +#define TEGRA264_RESET_DPAUX 8 +#define TEGRA264_RESET_EQOS_PCS 9 +#define TEGRA264_RESET_HWPM 10 +#define TEGRA264_RESET_I2C1 11 +#define TEGRA264_RESET_I2C2 12 +#define TEGRA264_RESET_I2C3 13 +#define TEGRA264_RESET_I2C4 14 +#define TEGRA264_RESET_I2C6 15 +#define TEGRA264_RESET_I2C7 16 +#define TEGRA264_RESET_I2C8 17 +#define TEGRA264_RESET_I2C9 18 +#define TEGRA264_RESET_ISP 19 +#define TEGRA264_RESET_LA 20 +#define TEGRA264_RESET_NVCSI 21 +#define TEGRA264_RESET_EQOS_MAC 22 +#define TEGRA264_RESET_PWM10 23 +#define TEGRA264_RESET_PWM2 24 +#define TEGRA264_RESET_PWM3 25 +#define TEGRA264_RESET_PWM4 26 +#define TEGRA264_RESET_PWM5 27 +#define TEGRA264_RESET_PWM9 28 +#define TEGRA264_RESET_QSPI0 29 +#define TEGRA264_RESET_HDA 30 +#define TEGRA264_RESET_HDACODEC 31 +#define TEGRA264_RESET_I2C0 32 +#define TEGRA264_RESET_I2C10 33 +#define TEGRA264_RESET_SDMMC1 34 +#define TEGRA264_RESET_MIPI_CAL 35 +#define TEGRA264_RESET_SPI1 36 +#define TEGRA264_RESET_SPI2 37 +#define TEGRA264_RESET_SPI3 38 +#define TEGRA264_RESET_SPI4 39 +#define TEGRA264_RESET_SPI5 40 +#define TEGRA264_RESET_SPI7 41 +#define TEGRA264_RESET_SPI8 42 +#define TEGRA264_RESET_SPI9 43 +#define TEGRA264_RESET_TACH0 44 +#define TEGRA264_RESET_TSEC 45 +#define TEGRA264_RESET_VI 46 +#define TEGRA264_RESET_VI1 47 +#define TEGRA264_RESET_PVA0_ALL 48 +#define TEGRA264_RESET_VIC 49 +#define TEGRA264_RESET_MPHY_CLK_CTL 50 +#define TEGRA264_RESET_MPHY_L0_RX 51 +#define TEGRA264_RESET_MPHY_L0_TX 52 +#define TEGRA264_RESET_MPHY_L1_RX 53 +#define TEGRA264_RESET_MPHY_L1_TX 54 +#define TEGRA264_RESET_ISP1 55 +#define TEGRA264_RESET_I2C11 56 +#define TEGRA264_RESET_I2C12 57 +#define TEGRA264_RESET_I2C14 58 +#define TEGRA264_RESET_I2C15 59 +#define TEGRA264_RESET_I2C16 60 +#define TEGRA264_RESET_EQOS_MACSEC 61 +#define TEGRA264_RESET_MGBE0_PCS 62 +#define TEGRA264_RESET_MGBE0_MAC 63 +#define TEGRA264_RESET_MGBE0_MACSEC 64 +#define TEGRA264_RESET_MGBE1_PCS 65 +#define TEGRA264_RESET_MGBE1_MAC 66 +#define TEGRA264_RESET_MGBE1_MACSEC 67 +#define TEGRA264_RESET_MGBE2_PCS 68 +#define TEGRA264_RESET_MGBE2_MAC 69 +#define TEGRA264_RESET_MGBE2_MACSEC 70 +#define TEGRA264_RESET_MGBE3_PCS 71 +#define TEGRA264_RESET_MGBE3_MAC 72 +#define TEGRA264_RESET_MGBE3_MACSEC 73 +#define TEGRA264_RESET_ADSP_CORE0 74 +#define TEGRA264_RESET_ADSP_CORE1 75 +#define TEGRA264_RESET_APE 76 +#define TEGRA264_RESET_XUSB1_PADCTL 77 +#define TEGRA264_RESET_AON_CPU_ALL 78 +#define TEGRA264_RESET_AON_HSP 79 +#define TEGRA264_RESET_UART4 80 +#define TEGRA264_RESET_UART5 81 +#define TEGRA264_RESET_UART9 82 +#define TEGRA264_RESET_UART10 83 +#define TEGRA264_RESET_UART8 84 + +#endif /* DT_BINDINGS_RESET_NVIDIA_TEGRA264_H */ diff --git a/include/dt-bindings/reset/sun55i-a523-r-ccu.h b/include/dt-bindings/reset/sun55i-a523-r-ccu.h index dd6fbb372e19..eb31ae9958d6 100644 --- a/include/dt-bindings/reset/sun55i-a523-r-ccu.h +++ b/include/dt-bindings/reset/sun55i-a523-r-ccu.h @@ -21,5 +21,6 @@ #define RST_BUS_R_IR_RX 12 #define RST_BUS_R_RTC 13 #define RST_BUS_R_CPUCFG 14 +#define RST_BUS_R_PPU0 15 #endif /* _DT_BINDINGS_RST_SUN55I_A523_R_CCU_H_ */